RequiredExperience with Government
RequiredOEM Authorization Certificate Bid to RA enabled No Show Case ( 2 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Mode of Supply Knocked Down To Be Assembled At Consignee Site By The Seller Assembled Ready To Use
RequiredKnocked Down To Be Assembled At Consignee Site By The Seller
RequiredKnocked Down To Be Assembled At Consignee Site By Consignee Himself 1/7 Design of showcase Compartments plus open shelves(two horizontal and two vertical) * Number of drawers N.A * Number of large compartments (with shelves) 2 1
Required2
Required3
Required4
Required5
Required6
RequiredN.A Number of shelves in each compartments 2 1
Required2
Required3
Required4
RequiredN.A Number of large com partments(without shelves) 2 1
Required2
Required3
Required4
Required5
Required6
RequiredN.A Number of partition for compartment 2 1
Required2
Required3
Required4
RequiredN.A Type of door for compartments Shutter on hung side Sliding shutter
RequiredShutter on hung side
RequiredN.A Number of doors in compartment 2 1
Required2
Required3
Required4
Required5
Required6
RequiredN.A Number of open shelves(vertical) N.A 1
Required2
Required3
Required4
RequiredN.A Number of open shelves(horizontal) 2 1
Required2
Required3
Required4
RequiredN.A Number of open shelves(half width) 2 1
Required2
Required3
Required4
RequiredN.A Number of shelves(full width) N.A 1
Required2
Required3
Required4
RequiredN.A Number of small compartments(with shelves) N.A 1
Required2
Required3
Required4
RequiredN.A Number of small compartment (without shelves) N.A 1
Required2
Required3
Required4
RequiredN.A MATERIAL Material specification Prelaminated particle board of grade II type III of IS12823/Latest
Requiredboth side laminated
Requiredouter side laminated with shade matching with top shade and fascia shade and having balancing laminate of 0.5mm thickness on other side Flat single prelaminated MDF board conforming to designation PLMDF-203 of IS 14587/Latest having balancing laminated of 0.5mm thick on other side
RequiredPrelaminated particle board of grade II type III of IS12823/Latest
Requiredboth side laminated
Requiredouter side laminated with shade matching with top shade and fascia shade and having 2/7 balancing laminate of 0.5mm thickness on other side
RequiredCommercial Block Board BWP grade Conforming to IS 1659
RequiredDecorative Block Board BWP grade Conforming to IS 1659
RequiredCommercial Block Board MR Grade Conforming to IS 1659
RequiredDecorative Block Board MR Grade Conforming to IS 1659
RequiredTeak wood
RequiredTeak carved wood
RequiredOther wood Material thickness of complete body
Requiredfascia and dra wer/compartment/op en shelves ±2mm 15 5
Required9
Required12
Required15
Required19
Required25
Required38 Or higher Material thickness of back
Requiredpartition and drawer bottom/compartmen t shelves ±1mm 9 3
Required5
Required9
Required12
Required15
Required19
Required25
Required38 Or higher All plain panels edge to be banded with 0.8-1.0 mm thick PVC tape with the help of hot melt glue with 0.8-1.0 mm thick PVC tape with the help of hot melt glue
RequiredCP teak wood lipping
RequiredN.A Skirting thickness ±2mm 15 3
Required5
Required9
Required12
Required15
Required19 Or higher Buffers made of Nylon * MISC Number of Glass shutter for small compartment N.A 1
Required2
Required3
Required4
Required5
Required6
RequiredN.A Preservation treatment YES * Locking system provided NO YES
RequiredNO Handles for drawers/compartments Corrosion resistance metal * Fixing of channel for drawer N.A * Length of telescopic channel ±10mm N.A * Average weight of telescopic channel ±50Gms N.A * Openable shutter hung on side of the compartment with help of auto closing hinges of O cracking overlay type * 3/7 Buffer provided 4 number at bottom * Number of glass shutter for large compartment N.A 1
Required2
Required3
Required4
Required5
Required6
RequiredN.A DIMENSION Width of show case ±15mm 1370 1370
Required1450
Required1525
Required1580
Required1625
Required1680
Required1730
Required1780
Required1830 Height of show case ±15mm 1220 1220
Required1300
Required1370
Required1450
Required1525
Required1600
Required1680
Required1750
Required1830 Depth of show case ±10mm 405 * COLOUR AND FINISH Colour Oak Peach
RequiredOak
Requiredgrey
Requiredwhite
Requiredoff white
RequiredAs per buyer's choice Material finish Swede finish Swede finish
RequiredMatt finish
RequiredTeak laminate/ply with polish
RequiredTeak laminate/ply with melamine finish WARRANTY Warranty period in number of years 1 1
Required2
Required3 Or higher CERTIFICATION Test reports to be furnished to buyer on demand YES YES
RequiredNO Product having BIFMA certification NO YES
RequiredNO OEM of offered product is ISO 9001:2015 certified NO YES
RequiredNO OEM of offered product is ISO 14001:2015 certified NO YES
RequiredNO OEM of offered product is ISO 18001:2007 certified NO YES
RequiredNO * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
