SPECIAL REPAIR TO BLDG NO. P-778 and P-780 (OR MAP MD ACCN) IN ARMY AREA BANAR AT JODHPUR

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15 cm thickness (below or above ground level) and removing from site complete all as specified and directed by Engineer-in-Charge.

Dismantling of floor, hearth or wall tiles including cement mortar bedding but not backing and removal of debris/ rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone walls or concrete surfaces, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Taking upt or down 20mm bore steel tubing and connection including cleaning for re-fixing of removal to store complete all as specified and directed by Engineer-in-Charge.

Taking upt or down 25mm bore steel tubing and connection including cleaning for re-fixing of removal to store complete all as specified and directed by Engineer-in-Charge.

Dismantling of 100 mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from trenches/wall, if required complete all as specified and directed by Engineer-in-Charge.

Dismantling of 110mm dia PVC (SWR) rain water pipe with rubber ring joints complete all as specified and directed by Engineer-in-Charge.

Material and labour for 25mm thick PCC (1:2:4) type B-0, using 12.5mm graded stone aggregates as in base concrete to floor finish complete all as specified and directed by Engineer-in-Charge.

Material and labour for coloured Non-skid Ceramic tiles 7 to 8 mm thick (Square/rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Material and labour for coloured Glazed ceramic tiles in vertical surface 350 x 250mm/350 x 450mm, 7-8 mm thick (glossy finish) on walls/vertical surfaces over and including 10mm thick rendering in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick in CM 1:6 on fair face of brick masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for 15mm thick rendering in two layer, 5 mm thick rendering in CM 1:4 mixed with WPC over 10mm thick rendering in CM 1:4 on brick masonry/concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge . Note:- WPC shall be measured and paid separately.

Material and labour for 10mm thick rendering in CM 1:3 on concrete surface as in ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound ISI marked complete all as specified and directed by Engineer-in-Charge.

Material and labour for two coats of cement base paint over one coat of alkali resistance primer on newly plastered surfaces of walls including necessary preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing PVC water tanks exc 250 ltr but not exc 500 ltr, setting aside (or lowering if reqd) cleaning and removing all scale and dirt, etc from tanks and form mouths of circulating pipes, etc reconnecting and re-fixing the same in position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 500 ltr capacity rotational moulded polythene water storage tank of white colour (cylindrical vertical with closed top three layer) hoisted and fixed in position incl 20mm dia bore ball valve PTMT high pressure with polythene float and fly nut complete including dismantling water tanks and removing from site all as specified and directed by Engineer-in-Charge.

Supply and fixing 15mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls, ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge

Supply and fixing 20mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls, ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge

Supply and fixing 25mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls, ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair CP grating doom 100mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair stop valves, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore complete all as specified and directed by Engineer-in-Charge.

Fixing only stop valves, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair chromium plated with 15mm dia long shank and cup (concealed type) stop cock complete all as specified and directed by Engineer-in-Charge.

Fixing only chromium plated with 15mm dia long shank and cup (concealed type) stop cock complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair CP 15 mm dia bib taps cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

Fixing only CP 15mm dia bib taps cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe of for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair brass chromium plated shower rose 100mm size complete all as specified and directed by Engineer-in-Charge.

Fixing only brass chromium plated shower rose 100mm size complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs 20mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs 15mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs 25mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair brass chromium plated tubular towel rail, 20mm dia D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.

Fixing only brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.

Removing of existing filling in sunken floor of WC and repair to sunken floor with 15mm thick plastering in CM 1:3 of internal surface mixed with WPC, than painting with bitumen 30/40 over a coat of bitumen primer, putting 50 micron polythene than filling with PCC 1:5:10 type E-2 using 40mm graded stone aggregate and inserting 50mm bore 1.00 m long GI water tubing to the wall complete all as specified and directed by Engineer-in-Charge. Note :- WC and tiles shall be measured and haid separately.

Supply and fixing in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440mm white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 (using 40mm aggregate stone aggregates) and making food to dismantled floor including removing rubbish complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 10 liter PVC valve less, symphonic action type dual type flushing, low level, white, with inlet ball valve, float and handle including 450mm long PVC connection and brackets complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 75mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 75mm dia cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100mm bore cast iron soil, waste and vent pipes, sand cast in any length with or without ears with cement joints fixed on walls complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100mm bore cast iron bend (equal or unequal) diminishing piece or tapers (large bore measured) with oval access door complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100mm dia CI tee branch single (equal or unequal) ordinary or inverted (spigot or socket type of or with parallel branches with oval access door complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100mm dia cast iron cowl complete all as specified and directed by Engineer-in-Charge.

S & F 110mm dia PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engineer-in-Charge.

S & F 110 mm dia PVC (SWR) bends/shoe any radius with access door complete all as specified and directed by Engineer-in-Charge.

S & F 110 mm dia couplers complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof.

Material and labour for PCC 1:3:6 type C2, using 40mm graded stone aggregate as in platform to PVC water tanks complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair on wall stainless steel peg set of five 300mm long and 30mm wide (min) with steel screws and rowell plugs complete all as specified and directed by Engineer-in-Charge.

Material and labour cement concrete 1:2:4 mix type B-0 (using 12.5mm graded stone aggregate) in padding finishing surface of concrete topping even and fair (without using extra cement) all as specified of average thickness 40mm in slope 1:40 over roof complete all as specified and directed by Engineer-in-Charge.

Material and labour 10mm thick plastering in CM (1:3) on concrete roof surfaces mixed with water proofing compound @ 3% by weight of cement and finishing the surface even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured and paid separately.

Material and labour water proofing treatment of roof surfaces with one coat of bitumen primer T-10/polymerised grade conforming to IS-3384 @ 0.30kg /Sqm and one coat of bonding material using blown type bitumen confirming to IS-702 grade 85/25 @ 1.20 Kg/sqm applying water proofing treatment of roof surfaces as 3mm thick APP modified membrane (min 3.5 kg weight/sqm) with non-woven polyester reinforcement/mat centre core with mineral gravel finish on upper side of membrane bitumen with overlaps 100mm on side lap(length side) and 100mm on end lap (the width side) as per manufacturer’s instructions & laying of membrane by manufacturer’s rep all as specified. Note:- Water tightness to be tested by ponding of water after completion of water proofing treatment work for dampness/leakage/seepage.

shree swaroop const co

KARNI CONSTRUCTION COMPANY

Tirupati electricals works and services