Tender For PROPOSED BEAUTIFICATION and DEVELOPMENT OF MUSSOORIE LAKE

(ELECTRIC WORKS) WGPVCPT Point wiring in PVC conduit with piano types switch: wiring for light point /fan point/ Ex fan point/ Call Bell point recessed PVC conduit,with piano types switch.phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq mm FR PVC insulated copper conductor single core cable etc. as required.Group C

LAPACCPT S/F light plug point piano types accessories: Supplying and fixing metal box of 150 mm 75 mm 60 mm deep (nominal size) onsurface or in recess with suitable size of phenolic laminated sheet cover in front incuding providing and fixing 3 pin 5/6 anos socket outlet and 5/6 amps piano types switch. connection,painting etc.as required.(for light plugs to be used in non residential buildings)

WGSTLPTTC Twin controal point wiring in PVC conduit,with piano types switch wirining for twin control light point recessed PVC conduit,with piano types switch, Phenolic laminated sheet. Suitable size M.S. box and eartghing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as requried.

PPACCPT S/F power plug point piano types accessoriies : supplying and fixing matel box of 180 mm 100mm 60 mm deep on surface or in recess with 15 Amp piano types switch and socket. Complete with all work.

MCBDPSOC20 S/F 20A SPN MCB industrial socket outlet : Supplying and fixing 20amps, 240 volts, SPN industrial type, socket outlet, with 2 pole

WGPVCSB Circuit/sub-man wiring in PVC conduit , wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 1.5 sg. Mm + 1 1.5 sq mm earth wire.

WGPVCSB Circuit/sub-man wiring in PVC conduit , wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 2.5 sq mm +1 2.5 sq mm earth wire.

WGPVCSB Circuit/sub-man wiring in PVC conduit , wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 4 + 2.5 sq mm + 2 *2.5 sq mm earth wire.

CREB S/F Ceiling rose: supplying and fixing 3 pin samp ceiling rose including connection etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

EARGIPL GI earth plate electrode: earthing with GI earth plate 600*600*6 mm thick i/c accessories and providing masonary encloser with cover providing masonary encloser with cover plate having locking arrengement and watering pipe etc complete work.

EARGIWRPIP P/F 6 SWG GI earth wire in pipr providing and laying earth connection from earth electrodenwith 6 SWG GI wire in 15 mm dia GI pipe complete work.

TPMCBDB S/F TP MCB DB: 4 way (4+12) Double door, hotizontal type.

MCBC S/F C series SP MCB S/F 5 amo 32 amp rating, 240V C series MCB on existing DB complete with connections.

MCBTPIS S/F TP MCB isolator : S/F 100 amp rating , 415V isolator on existing DB complete with connections.

S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SS.W.G.M.S Sheet incorporating 10 mm dia. M.S. bar round and duly painted with red oxide along with all work.

Eeaction testing of Exhaust fan complete with all work.

Eeaction testing of ceiling fan etc excluding supply of down road complete in all respect.

Supply of 7w LED Bulb for mounting on Brass holder. (havells catc. Ref. HLDEUEEMC8R007 or equivalent)

Supply of E-Lite 20W LED pride plus Neo batten:A Color changing LED batten with options of 3000 K & 6500 K. all in one fixture. (havells catc. Ref LHEXACP7IN1WO20 or equivalent)

Supply of Metallic range exhaust fan.300 mm sweep. (havells catc. Ref Ventil Air-DSP or equivalent)

Supply of 1200mm sweep , 5 star rated ceiling fan. (havells catc. Ref ES NEO or equivalent

Supplying of Recess/Conceal Fazer Neo LED Panel square with Ultra slim LED panels with inbuilt drivder in Pc body. Premium aesthetics with stepped ring bezel with integrated driver (6 W LED, 6000 K ). ( Firefly catc. Ref. LHEBMDP61W1WOO6 or equivalent)

(SWINGS FOR KIDS) Bull Ride, Capacity 1 person, electric drive with 5 HP motor. 10*10 Sq.ft area required.

Ferris Wheel , 40 feet height, 32 person capacity. Hydraulic drive with 25 HP motor ,30*400 sq. ft area required

Fountain ,Electric drive with 5 HP motor, 10*10 sq. ft area required.

Hellicopter, 8 Feet height , 10 person capacity, Electrical Drive with 5 HP motor 15*15 sq. ft area required.

Kite Flyer ,12 Feet height , 10 person capacity , Electrical drive with 5 Hp motor, 20*20 sq.ft area required.

(ELECTRIFICATION FIXTURES FOR LAKE) Solar streel light in 60W LED power and PIR motion sensor with ,12 mm sensing distanceincluded solor light , battery ,pole and panel etc.

Solar streel light in 40W LED power and PIR motion sensor with ,12 mm sensing distanceincluded solor light , battery ,pole and panel etc.

(SANITARY WORK BEUTIFICATION) Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382l leaving to mm gap for thermal expansion ,(i) single socketed pipes. 100 mm diameter.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382l leaving to mm gap for thermal expansion ,(i) single socketed pipes. 75 mm diameter.

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I, rain water pipes embedded in and including cement corner blocks 10*10* 10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 gradea stone aggregate 20 mm nominal size ) and cost of cutting holes and making good the walls etc. 100 mm diameter.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430*260*350 mm and 340*410*265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets. cutting and marking good the walls and floors wherever required. One urinal basin with 5 liter white P.V.C. automatic flushing cisterm.

Providing and fixing white vitreous china pedestal types water closel (European types W.C. pan) with seal and lid , 10 liter low level white P.V.C. flushing cistern with manually confarming to IS : 7231 with all fittings

Providing and fixing wash basin with C.I. brackets , 15 mm C.P. brass pillar taps, 32. white vitreous china wash basin size 630*450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash b completely recessed at the back for the reception of pipes ands fitting.

Providing and fixing G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the walls etc. internal work - exposed on wall 15 mm dia. Nominal bore.

Providing and fixing G.I. pipes complete with G.I. fitting includingtrenching and refilling etc. (external work) 15 mm dia nominal bore.

Providing and fixing G.I. pipes complete with G.I. fitting includingtrenching and refilling etc. (external work) 20 mm dia nominal bore.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete.20 mm nominal bore.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931. 15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser approved quality conforming to IS : 8931. 15 mm nominal bore.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make. Including painting of fittings and brackets,cutting and making good the walls.

Providing and placing on terrace (at all floor levels) polyethylene water tank ISI 12701 marked with cover and suitable locking arrangement in tank.and necessary holes for inlet. Outlet and overflow pipes but without fitting base support for tank.

Providing and fixing PTMT soap dish holder having length of 138m 102mm height of 75mm with concealed fitting arrangements weig than 106 gms.

Providing and fixing 600*45 mm bevelled edge mirror of superior quality complete with 6 mm thick hard board ground fixed to woo C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden 600mm long lowel rail with total length of 645mm .width 78mm and effective height of 88mm, weighing not less than 190 gms.

Providing and fixing uplasticised PVC connection pipe with brass unions . 45cm length. 15 mm nominal bore.

Providing and fixing PTMT grating of approved quality and colour.Circular type.100 mm nominal dia.

Providing and fixing ball valve ( brass) of approved quality complete. High or low pressure with plastic floats. 15 mm nominal bore.

Constructing brick masonry manhole in cement motor 1:4 (1 cement :4 coarse inside size 60*45*50 cm. inside including C.I. cover with frame (light duty) 455*610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg): with F.P.S bricks with class designation.

(CIVIL WORK SHOPS) Earth work in excavation by mechanical means (Hydraulic Excavat in foundation trenches or drains (not exceeding 1.5 m in width or 1 including dressing of sides and ramming of bottoms, lift upto 1.5 out the excavated soil and disposal of surplus excavated soil as dir of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. Al work upto plinth level. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete.

Treatment of soil under elsting floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor with Chlorpyriphos/ Lindane E.c. 20% with 1%.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand )

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shape and size in Cement mortar 1:6 ( 1 cement : 6 coarse sand )

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve woNability without impairing strength and durability as per direction of Engineer-incharge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Centring and shuttering including strutting,ropping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttering including strutting,ropping etc. and removal of form for centring and Shutering for Suspended floors, roofs, landings, balconies and access platform.

Centring and shuttering including struttlng,ropping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pretreatment of the surface.Fixing with adjustable lugs with split end tail to each jamb

Providing and fixing pressed steel door frames confirming to IS: 43 from commercial mild steel sheet of 1.25 mm thickness including h jamb, bead and if required angle threshold of mild steel angle of se or base ties of 1.25mm pressed mild steel welded or rigidly fixed t mechanical means, adjustable lugs with split end tail to each jamb butt hinges 2.5mm thick with mortar guards, lock strike-plate and as specified and applying a coat of approved steel primer after pre surface as directed by Engineer-in-charge. Profile B

Steel work welded in built up section/framed work including cutting in position and applying a priming coat of approved steel primer us required. In gratings, frames, guard bar, ladder, railings, brackets, gates similar works.

Providing and laying cement concrete in retaining walls, retum walls (any thickness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses,string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing in 1:2:4 (1 Cement :.2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

15 mm cement of mix in 1 :6 (1 cement: 6 fine sand)

12 mm cement plaster of mixin 1:6 (1 cement: 6 fine sand)

Providing and laying integral cement based water proofing treat including preparation of surface as required for treatment of balconies, tenaces etc consistng of following operations: a) Appl a slurry coat o neat cement using 2.75 kg/sqm. of cement ad with water proofing compound conforming to IS. 2645 and appro by Engineer-incharge over the RCC slab including adjoining upto 300mm height including cleaning the surface before treatm b) Laying brick bats with mortar using broken bricks,'brick bats 25 to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2 and approved by Engineer-in-charge over 20 mm thick layer cement mortar of mix 1:5 (1 cement :5 coarse sand ) admi water proofing compound conforming to IS : 2645 and appro Engineer-in-charge to required slope and treating similarty th walls and slabs c)

Providing and applying plaster of paris putty of 2 mm thickn plastered surface to prepare the surface even and smooth complete

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design. In 75x75 mm deep chase

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 1000x1000 mm

providing and laying Polished Granite stone flooring In required design and pattems, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base or cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slumy admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slumy mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and fifng 1st quality ceramic glazed wall tiles conf IS : 15622 (thickness to be specified by the manufacture ) of appr make in all colours, shades except burgundy, bottle green, black of size as approved by Engineer-in-Charge in skirting, risers of ste dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 c sand) and jointing with grey cement slurry @ 3.3kg per sqm i pointing in white cement mixed with pigment of matching sh complete.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) non-decorative type, core of block board construction with frame o wood and well matched commercial 3 ply veneering with vertical g bands and face veneers on both faces of shutters, 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1 :4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm Including pointing the joints with white cement and matching pigments etc., complete.

provding and fixing aluminium sliding door bolts ISI marked anodi coating not less than grade AC 10 as per IS : 1868) transparent or colour or shade with nuts and screws etc. complete. 300x16 mm

Providing and fixing aluminlum handles ISI marked anodised (anod less than grade AC 10 as per IS : 1868) transparent or dyed to req shade with necessary screws etc. complete : 125 mm

Providing and fixing aluminium tower bolts ISI marted anodised (a not less than grade AC 10 as per IS : 1868 ) transparent or dyed t or shade with necessary screws etc. complete. 250x10 mm

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

Finishing walls with textured exterior paint of required shade. New work Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ttr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 Itr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows alll complete. With 4.0 mm thick glass panes.

Windows using galvanised M.S. wire gauge with average width of a In both diredions with wire of dia. 0.63 mm. With 12 mm mild steel U beading.

steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., induding cutting, hoisting, fixing n position and applying a priming coat of approved steel including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes.

supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking h push and pull operation complete, including the cost of providing and fling necessaty 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing of edemal wall system on Light gauge steel frame work with . Outer face having 6mm thick heavy duty fiber cement board fixed on 9mm thick heavy duty fiber cement board confimning to IS 148622000, category IV type A (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm cic of approved make. A grove of 2 mm to 3mm shall be maintained and groves shall be sealed with silicon based sealant. The board shall be fixed in a staggered pattem.Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 10 gauge of length varying from 25 to 45mm and intemal face 12.5mm thick gypsum plaster board fixed on 8mm thick fiber cement board confirming to IS 14862:2000 of category 111 type B (High pressure steam cured) as per standard sizes fixed with selfdrilling / taping screws / fasteners @ 60cm dc of approved make, proper taping and jointing to be done using fiber mesh tape and epo)$' and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately).

(CIVIL WORK DUCK POINT) Earth work in excavadon by mechanical means (Hydraulic Excavat in foundation trenches or drains (not exceeding 1.5 m in width or 1 including dressing of sides and ramming of bottoms, lif upto 1.5 out the excavated soil and disposal of surplus excavated soil as dir of 50 m. All kinds of soil.

Providing and laying in positon cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plintn level. 1 :4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Supplying and filling in plinth with Jamuna sand under floors including, watering,ramming consolidating and dressing complete.

Providing apd laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. (Note :- Cement content consideredin this item is 330 kg/cum. Excess/ lesscement used as per design mix is payable/recoverable separately). All works upto plinth level

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. ThermoMechanically Treated bars.

Centring and shuttering including struttng,ropping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel work welded in built up section/framed work including cutting in position and appMng a priming coat of approved steel primer us required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and laying integral cement based water proofing treat including preparation surface as required for teatment of balconies, terraces etc consisting of following operations: a) Appl a slurry coat of neat cement using 2.75 kg/sqm. of cement ad With water proofing compound conforming to IS. 2645.and appro by Engineer-in-charge over the RCC slab including adjoining upto 300mm height including cleaning the surface before treatm b) Laying brick bats %'ith mortar using broken bricks/brick bats 25 to 115mm size vyith 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : and approved by Engineer-in-charge over 20 mm tick layer cement mortar of mix 1:5 (1 cement :5 coarse sand ) admi water proofing compound conforming to IS 2645 and appro Engineer-in-charge to required slope and treating similarly th walls and slabs c) After two days of proper curing applying a sec coat of cement slurry.

Providing and fixing 1st quality ceramic glazed wall tiles conf IS : 15622 (thickness to be specified by Oe manufacture ) of appr make in all colours, shades except burgundy, bode green, black of size as approved by Engineer-in-Charge in skiring, risers of ste dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 c sand) and jointing witl grey cement slurry @ 3.3kg per sqm pointing in white cement mixed with pigment of matching sh complete.

Providing and laying rectified Glazed Ceramic floor fles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1 :4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with vånite cement and matching pigments etc., complete.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 IWIO sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

(CIVIL WORK KART ROAD) Earth work In excavation by mechanical means (Hydraulic Excavat in foundation trenches or drains (not exceeding 1.5 m In width or 1 including dressing of sides and ramming of bottoms, lit upto 1.5 out the excavated soil and disposal of surplus excavated soil as dir of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centing and shuttering. Al work upto plinth level. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Brick work with F.P.S. bricks of Cass designation 75 in superstructure above plinth level upto floor V level in all shape and sizes in Cement mortar 1 :6 (1 cement : 6 coarse sand)

Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work using cement content as per approved design mix including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strenght and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess less cement used as per design mix is payable/ recoverable separately_. All works upto plinth level.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-mechanically treated bars.

Centring and shuttering including strutting, ropping, etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttering including strutting, ropping, etc. and removal of form for suspended floors, roofs, landings, balconies and access platform.

Centring and shuttering including strutting, ropping etc., and removal of form for Columns, pillars, piers, abutments, posts and struts.

Steel work welded in built up section/ framed work including cutting in position and applying a priming coat of approved steel primer as required. In gratings, frames, guard bar, ladder, railing, brackets, gates and similar works

Painting steel work with deluxe multi surface paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an undercoat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacturer.

(CIVIL WORK FRAME) Earth work in excavation by mechanical means (Hydraulic Excavat in foundation trenches or drains (not exceeding 1.5 m in widb or 1 including dressing of sides and ramming of bottoms, lift upto 1.5 out the excavated soil and disposal of surplus excavated soil as dir of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. AJI work upto plinth level. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Brick work with F.P.S. bricks of class designaton 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 coarse sand )

Brick work with F.P.S. bricks of class designation 75 in superstucture above plinth level upto floor V level in all shape and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding be cost of centering, shuttering, finishing and reinforcement, induding admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability witout impairing strength and durability as per direction of Engineer-in-charge. (Note :Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level

Reinforcement for R.C.C. work including staightening, cuing, bending, pacing in position and binding all complete. ThermoMechanically Treated bars.

Centring and shuttering including strutting,ropping etc. and removal ofform for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttering including stutting,ropping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Strus.

Steel work welded in built up seclon/fra work including cutting in position and applying a priming coat of approved steel primer us required. In gratings, frames, guard bar, ladder, railings, brackeo, gates and similar works.

Steel work in built up Ubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in posidon and applying a priming coat of approved steel primer, including welding and bolted wit special shaped vashers etc. complete.Hot finished welded type tubes.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 IW 10 sqm of approved brand or manufacture

Painting Steel work

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earb after reduction by 20% one part of stacked volume of sludge or manure aner reduction by 8%), flooding Withwvater, filling vith earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus eart by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)

Digging holes in ordinary soil and refilling the same with the excavated earb mixed with manure or sludge in the rato of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding Wib water, dressing including removal of rubbish and surplus earth, if any, wit-t all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes Holes 1.2 m dia and 1.2 m deep

Holes 90 cm dia, and 90 cm deep

Holes 60 cm dia, and 60 cm deep

Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem yell developed as per direcion of the officer-in-charge

Providing and Displaying Ficus nuda topiary well developed with fresh & healthy foliage 45 to 60cm spread 75 to 90 cm ht. bushy in 35 cm Cement Pot as per direction of the officer-in-charge.

providing and Displaying Ficus reglnol well developed fresh & healthy foliage 60 to 75 cm spread 105 to 120 cm ht., Bushy In 35 cm Cement Pot as per direction of the officer-in-charge

Providing and Displaying Phoenix Roebelenii palm well developed having 20 to 25 fresh & healthy leaves 90 to 105 cm ht. In 30 cm Cement Pot as per direcfon of the officer-ln-charge

Providing and Displaying Washingtonia fillfera palm well developed 90 to 105 cm ht. having 5 to 6 straight fresh and healthy leaves in 35 cm Cement Pot as per direction of the officer-in-charge

Providing and stacking of Adansonia digitata (kalp vricksh) of ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge

Providing and stacking of Butea frondosa (Flame of Forest) of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction ofthe officer-in-charge.

Ant termite treatment of lawn area through premise 30.50% 1 P. one liter premise diluted in 499 liters water and applying soluton @ 1.00 litre solution per sqm lawn or bed area.(two application) ilc cost of chemical)and as per direction of officer-in-charge

Excavating, supplying and filling of local earn (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earb in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete, Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

(CIVIL WORK RENOVATION WORK) Earth work In excavation y mechanical means (Hydraulic Excavat in foundation trenches or drains (not exceeding 1.5 m In width or 1 including dressing of Sides and ramming of bottoms, lift upto 1.5 out the excavated soil and disposal of surplus excavated soll as dlr of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. Al work upto plinth level. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Brick work with F.P.S. bricks of class designation 75 in superstucture above plinth level upto floor V level in all shape and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in positon machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability våthout impairing stength and durability as per direction of Engineer-in-charge. (Note :Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level

Supplying and stacking at site.63 mm to 45 mm size stone aggregate

Supptying and filling in plinth vath sand under floors, including Watering, ramming, consolidating and dressing complete.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine 97th strong vibratory compaction, of approved size, design & shape, laid in required colour and pattem over and including 50mm thick compaded bed of coarse sand, filling be joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Steel work welded in built up section/framed work Including cutting in position and applying a priming coat of approved steel primer us required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Paining Steel work with Deluxe Mult Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm overan under coat of primer applied @ 0.80 IW 10 sqm of approved brand or manufacture

(CIVIL WORK NALA) Site clearance lncluding all labour and tap.

1-2 Excavation in foundation for retaining, breast wells etc. in all types of sol's and rocks including all lead, lit and Osposal of surplus materiel ae per direcfon of engineer - in - charge, as per drawing and technical specificetions clause 306.1 of Mord specification

2-2 Concrete 'Witn cemetd coarse sand end 40nrn gauge done ballast inproportion 1 :4:8 in foundation and floors including empty of all material, labour annd T&P etc. Required for proper completion of the work. As per drawing and technical specifications clause 802,803.1202 & 1203

11-4 Providing concrete for plain/reinforoed concrete in open foundations compete as per drawings and technical specifications dause 802,803,1202 & 1203114-5 R.C.C. grade M 25

13-7 Providing fitting and fixing mild steel complete as per drawing and technical specification clause 1208.20

13-26 Providing steel R.S.Js/built -up steel sections including, welding/rivetting.hoisting.fixing in position for composite girders witl shear connectors complete With painting as per drawing and technical specifications clause 1205.613-26-1 steel section.

1-4 Random Rubble stone masonry laid in 1 :6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specifications clauses 702, 704, 1202 & 1203 of mord specification.

Plastering with cement mortar (1:4) 15 mm thick on brickwork in substucture as per technical specification clauses 613.4 & 1204

12-5 Plain/reinforced cement concrete in substucture complete as per drawigs and technical specification Causes 802, 804. 805, 806,807, 1202 and 1204 (For height upto 5 m) 12-5-2-2 Nominal mix 1 :2:4 (Hand mixed)

(CIVIL WORK GAZEBO) Earth work in excavation by mechanical means (Hydraulic Excavat in foundation tenches or drains (not exceeding 1.5 m In victtl or 1 including dressing of sides andramming of bottoms, lit upto 1.5 out the excavated soil and disposal of surplus excavated soil as dlr of 50 m. All kinds ofsoil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plint level. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Brick work viti F.P.S. bricks of Cass designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 coarse sand )

Brick work vith F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shape and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level

Reinforcement for R.C.C. work including straightening, cuing, bending, placing in position and binding all complete. Thermo- Mechanically Treated bars.

Centring and shuttering including struting,ropping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centring and shutering including stutng,ropping etc. and removal of form for Columns, Pillars, Piers, Abutnenc, Posts and Struo.

Steel work welded in built up section/framed pork Including cutting in position and applying a priming coat of approved steel primer us required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar work.

Steel work in built up Obular (round, square rectangular hollow tubes etc.) trusses etc., Including cutting, hoislng, fixing in position and applying a priming coat of approved steel primer, Including welding and bolted PMt1 special shaped washers etc. complete.Hot finished welded type tubes.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 Itr/10 sqm over an under coat of primer applied @ 0.80 It/ 10 sqm of approved brand or manufacture

Painting Steel work

balwant singh rawat

C S RAWAT