REPAIR TO SUNKEN, STONE/BRICK MASONAR, RENDERING TO MD ACCN OF 28 CAMP, PIRU SINGH CHOWK, SKE LINE AND AUL UNDER AGE B/R-I AT MIL STN YOL

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for sunken portion including removal of debris to a distance exc 1.5 Km but n exc. 2 Km outside military stn, complete all as specified.

M&L for plain cement concrete 1:5:10 type E-2 (Using 40 mm graded crusshed stone aggregate) as in sunken floors, complete all as specified.

Water proofing treatment of sunken portion using shaliurethane-BTD of STP make or equivalent mentioned in Appendix 'C' high solid content component Water basedliquid applied elastometric water proofing membrane as ASTMC 836 and ASTMD 6083, thickness of the membrane shall be 1.50 mm having solid content of more than 80 % elongation of 500 + (-) 50 % laid over reinforcing layer on non woven geotextile mesh of 40/50 gms including applying self primer coat by diluting with 1:1 ratio @ 0.20 Kg per square metre and surface preparation, complete all as per manufacturer's instructions/ specifications and as directed.

M&L 25mm PCC 1:2:4, type B1 (Using 20mm graded crusshed stone aggregate) for sunken portion complete all as specified and directed.

S&F for 32 mm dia, 450 mm long, galvanised iron, medium grade pipe as in spout of sunken floor all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, complete including removal of debris to a distance exc 1.5 Km but n exc 2 Km outside the military stn, Complete all as specified.

M&L for Non skid ceremic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified.

M&L for Glazed ceramic coloured tiles 450mm x 350mm x 7 mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match over and includind 10 mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified.

Demolition of cement concrete reinforced of any description in any position complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km outside military stn, all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified.