Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.1 LAccepted-AOC VIKASH NAGAR RAMGARH CANTT WARD NO 06 PO PS DISTT RAMGARH JHARKHAND PIN 829122 | RAMGARH | RAMGARH | JHARKHAND | 829122 | ₹17.1 L | L1 | Accepted-AOC QUOTED AMOUNT IS LOWEST AND REASONABLE |
| 2 | L2₹19.4 L+₹2.3 L (13.6%)Rejected-Finance | ₹19.4 L+₹2.3 L (13.6%) | L2 | Rejected-Finance QUOTED AMOUNT IS NOT LOWEST AND NOT REASONABLE |
| 3 | L3₹19.7 L+₹2.6 L (15.4%)Rejected-Finance | ₹19.7 L+₹2.6 L (15.4%) | L3 | Rejected-Finance QUOTED AMOUNT IS NOT LOWEST AND NOT REASONABLE |
| 4 | L4₹20.5 L+₹3.4 L (20.2%)Rejected-Finance | ₹20.5 L+₹3.4 L (20.2%) | L4 | Rejected-Finance QUOTED AMOUNT IS NOT LOWEST AND NOT REASONABLE |
| 5 | L5₹20.8 L+₹3.7 L (21.7%)Rejected-Finance GALI NO 4 GAUSHALA ROAD VIKASH NAGAR RAMGARH CANTT RAMGARH JHARKHAND 829122 | RAMGARH CANTT | RAMGARH | JHARKHAND | 829122 | ₹20.8 L+₹3.7 L (21.7%) | L5 | Rejected-Finance QUOTED AMOUNT IS NOT LOWEST AND NOT REASONABLE |
| Sl No | Description | Qty | Unit | M/S Bhushan Kumar Jain L7 | M/S ROHIT CONSTUCTION L1 | M/s Ray construction L5 | M/S SHAMBHU SHARAN SINGH L3 | ranjit singh L4 | M/s Popatlal A Rathod L6 | M/S NEHAL ENTERPRISES L2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Locker Bed Side Steel (FD-1029/257): Removel of old broken/damaged Leg of Locker Bed side steel with new one made out of 1mm CRCA sheet of commercial grade.The new leg shall be fabricated to a rectangular box profile of dimensions 75mm x 600mm and 100mm high as shown on drawing. The 1mm CRCA sheet will be precisely cut and bent using a press machine to form a hollow box section of the leg. The new leg must be welded securely to the existing Locker frame using MIG welding/ spot welding technique.All weld beads will be grounded smoothly to a clean finish. Complete all as directed by Engineer in charge. | 218 | Each | 660 ₹1,43,880 | 395 ₹86,110 | 380 ₹82,840 Lowest | 670 ₹1,46,060 | 650 ₹1,41,700 | 400 ₹87,200 | 600 ₹1,30,800 |
| 2.00 | Removel of old brokrn/damaged 03 way locking machenism system of Locker Bed side steel with new one made out of heavy-duty zinc alloy or as per Engr-in-charge. The vertical rods that move up and down from the lock body to the locker top and bottom should be made of a suitable diameter GI rod. The GI rods are cut to the precise length required for the top and bottom locking points. Locking machanism box should be made of 1mm CRCA sheet.The entire assembly is aligned carefully to ensure the rods move smoothly without any friction. The rods must engage fully with the top, bottom, and side frame holes for the lock to function correctly. Any exposed screws or parts are tightened, and a lubricant is applied to the moving parts for longevity. complete all as directed by Engineer in charge. | 120 | Each | 400 ₹48,000 | 270 ₹32,400 Lowest | 470 ₹56,400 | 400 ₹48,000 | 395 ₹47,400 | 465 ₹55,800 | 500 ₹60,000 |
| 3.00 | Removel of existing broken/damaged Door of Locker Bed side steel with new one made out of 1mm CRCA sheet of commercial grade.The size of door as per shown on drawing. The 1mm CRCA sheet will be precisely cut and bent using a press brake machine to form the door. The new door must be fixed with providing 03 nos of L-shape hinge as per drawing The door shall be made using MIG welding/spot welding technique.All weld beads shall be grounded smoothly to a clean finish. Complete all as directed by Engineer in charge. | 115 | Each | 1,000 ₹1,15,000 | 760 ₹87,400 | 750 ₹86,250 | 960 ₹1,10,400 | 950 ₹1,09,250 | 755 ₹86,825 | 500 ₹57,500 Lowest |
| 4.00 | Removel of existing broken/damaged shelf of Locker Bed side steel with new one made out of 1mm CRCA sheet of commercial grade.The size of shelf as per shown on drawing. The 1mm CRCA sheet will be precisely cut and bent using a press brake machine to form the door. The new shelf must be fixed with locker body using MIG welding/spot welding technique or as per Engr-in-charge.All weld beads shall be grounded smoothly to a clean finish. Complete all as directed by Engineer in charge. | 120 | Each | 680 ₹81,600 | 810 ₹97,200 | 890 ₹1,06,800 | 680 ₹81,600 | 672 ₹80,640 | 895 ₹1,07,400 | 200 ₹24,000 Lowest |
| 5.00 | Removel of the old, damaged handle from the locker door and install a new handle that matches the required dimensions 125mm long. The finish must be a bright, polished chrome to match the original look. The plating should be of good quality, free from blemishes, scratches, or flaking., complete all as directed by Engineer in charge. | 305 | Each | 200 ₹61,000 | 150 ₹45,750 Lowest | 180 ₹54,900 | 170 ₹51,850 | 182 ₹55,510 | 185 ₹56,425 | 200 ₹61,000 |
| 6.00 | Removal of old broken/damaged L- shape hinge medium weight (03 Nos in each shutter) of Locker Bed Side steel and install new one L- shape hinge medium weight as per shown on drawing including fixing of necessary accessories & spot welding as required complete all as directed by Engr-in-Charge. | 90 | Each | 180 ₹16,200 | 240 ₹21,600 | 250 ₹22,500 | 150 ₹13,500 Lowest | 165 ₹14,850 | 245 ₹22,050 | 500 ₹45,000 |
| 7.00 | Removel of old broken/ damaged hanging rod/pipe with end bracket of Locker bed side steel and fixed new one 02 Nos high-quality end brackets by using MIG welding/spot welding technique and also provide a new one 20 mm dia stainless steel hanging rod/pipe of locker bed side steel. complete all as directed by Engineer in charge. | 180 | Each | 250 ₹45,000 | 140 ₹25,200 | 160 ₹28,800 | 230 ₹41,400 | 230 ₹41,400 | 155 ₹27,900 | 100 ₹18,000 Lowest |
| 8.00 | Removal of a damaged, non-functional, or old 50mm almirah lock from locker without damaging other parts and install a new 06 lever 50mm brass lock that provides reliable security and smooth operation. The lock should come with a minimum of 02 Stainless Steel keys. Make- Godrej, Harrison, Link Locks, or equivelent. A light lubricant should be applied to the lock mechanism to ensure long-term smooth operation. complete all as directed by Engineer in charge. | 305 | Each | 425 ₹1,29,625 | 335 ₹1,02,175 | 380 ₹1,15,900 | 385 ₹1,17,425 | 410 ₹1,25,050 | 377 ₹1,14,985 | 200 ₹61,000 Lowest |
| 9.00 | Taking out of existing distorted or bent leg from Locker Bed side steel, and repair the existing Locker leg restoring its structural integrity.The repair shall involve a combination of denting to reshape the metal and welding to reinforce any cracked or weakened joints. including fixing arrangement and complete all as directed by Engr-in-Charge. | 125 | Each | 265 ₹33,125 | 165 ₹20,625 | 160 ₹20,000 | 250 ₹31,250 | 255 ₹31,875 | 162 ₹20,250 | 50 ₹6,250 Lowest |
| 10.00 | Taking out existing dilocated 03 way locking device of Locker Bed side steel and and repair the existing Locker 03 way locking device restoring its structural integrity.The repair shall involve a combination of denting to reshape the metal and welding to reinforce any cracked or weakened joints. including fixing arrangement and complete all as directed by Engr-in-Charge. | 75 | Each | 185 ₹13,875 | 110 ₹8,250 | 120 ₹9,000 | 170 ₹12,750 | 180 ₹13,500 | 124 ₹9,300 | 50 ₹3,750 Lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
23 Jun 2026, 6:00 pmClosed
GE RAMGARH CANTT
RAMGARH CANTT
REPAIR TO LOCKER BED SIDE STEEL (FD-1029/257) AND LOCKER BED SIDE STEEL SINGLE DOOR AND ITS PAINTING FOR PRC, SRC AND OTHER UNTS AT GE RAMGARH CANTT
2026_MES_769297_1
8300/3398/E8
Open Tender
Civil Works
Item Rate
180 days
RAMGARH CANTT
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE RAMGARH CANTT
₹40,000
Yes
25 Aug 2026
2 Jun 2026
30 Jun 2026
2 Jun 2026
23 Jun 2026
16 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Locker Bed Side Steel (FD-1029/257): Removel of old broken/damaged Leg of Locker Bed side steel with new one made out of 1mm CRCA sheet of commercial grade.The new leg shall be fabricated to a rectangular box profile of dimensions 75mm x 600mm and 100mm high as shown on drawing. The 1mm CRCA sheet will be precisely cut and bent using a press machine to form a hollow box section of the leg. The new leg must be welded securely to the existing Locker frame using MIG welding/ spot welding technique.All weld beads will be grounded smoothly to a clean finish. Complete all as directed by Engineer in charge. | 218 | Each | 100 | ₹21,800 |
| 2 | Removel of old brokrn/damaged 03 way locking machenism system of Locker Bed side steel with new one made out of heavy-duty zinc alloy or as per Engr-in-charge. The vertical rods that move up and down from the lock body to the locker top and bottom should be made of a suitable diameter GI rod. The GI rods are cut to the precise length required for the top and bottom locking points. Locking machanism box should be made of 1mm CRCA sheet.The entire assembly is aligned carefully to ensure the rods move smoothly without any friction. The rods must engage fully with the top, bottom, and side frame holes for the lock to function correctly. Any exposed screws or parts are tightened, and a lubricant is applied to the moving parts for longevity. complete all as directed by Engineer in charge. | 120 | Each | 100 | ₹12,000 |
| 3 | Removel of existing broken/damaged Door of Locker Bed side steel with new one made out of 1mm CRCA sheet of commercial grade.The size of door as per shown on drawing. The 1mm CRCA sheet will be precisely cut and bent using a press brake machine to form the door. The new door must be fixed with providing 03 nos of L-shape hinge as per drawing The door shall be made using MIG welding/spot welding technique.All weld beads shall be grounded smoothly to a clean finish. Complete all as directed by Engineer in charge. | 115 | Each | 10 | ₹1,150 |
| 4 | Removel of existing broken/damaged shelf of Locker Bed side steel with new one made out of 1mm CRCA sheet of commercial grade.The size of shelf as per shown on drawing. The 1mm CRCA sheet will be precisely cut and bent using a press brake machine to form the door. The new shelf must be fixed with locker body using MIG welding/spot welding technique or as per Engr-in-charge.All weld beads shall be grounded smoothly to a clean finish. Complete all as directed by Engineer in charge. | 120 | Each | 10 | ₹1,200 |
| 5 | Removel of the old, damaged handle from the locker door and install a new handle that matches the required dimensions 125mm long. The finish must be a bright, polished chrome to match the original look. The plating should be of good quality, free from blemishes, scratches, or flaking., complete all as directed by Engineer in charge. | 305 | Each | 10 | ₹3,050 |
| 6 | Removal of old broken/damaged L- shape hinge medium weight (03 Nos in each shutter) of Locker Bed Side steel and install new one L- shape hinge medium weight as per shown on drawing including fixing of necessary accessories & spot welding as required complete all as directed by Engr-in-Charge. | 90 | Each | 10 | ₹900 |
| 7 | Removel of old broken/ damaged hanging rod/pipe with end bracket of Locker bed side steel and fixed new one 02 Nos high-quality end brackets by using MIG welding/spot welding technique and also provide a new one 20 mm dia stainless steel hanging rod/pipe of locker bed side steel. complete all as directed by Engineer in charge. | 180 | Each | 10 | ₹1,800 |
| 8 | Removal of a damaged, non-functional, or old 50mm almirah lock from locker without damaging other parts and install a new 06 lever 50mm brass lock that provides reliable security and smooth operation. The lock should come with a minimum of 02 Stainless Steel keys. Make- Godrej, Harrison, Link Locks, or equivelent. A light lubricant should be applied to the lock mechanism to ensure long-term smooth operation. complete all as directed by Engineer in charge. | 305 | Each | 10 | ₹3,050 |
| 9 | Taking out of existing distorted or bent leg from Locker Bed side steel, and repair the existing Locker leg restoring its structural integrity.The repair shall involve a combination of denting to reshape the metal and welding to reinforce any cracked or weakened joints. including fixing arrangement and complete all as directed by Engr-in-Charge. | 125 | Each | 10 | ₹1,250 |
| 10 | Taking out existing dilocated 03 way locking device of Locker Bed side steel and and repair the existing Locker 03 way locking device restoring its structural integrity.The repair shall involve a combination of denting to reshape the metal and welding to reinforce any cracked or weakened joints. including fixing arrangement and complete all as directed by Engr-in-Charge. | 75 | Each | 10 | ₹750 |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.71 MB
3398TENDERDOCU.pdf
Tender Documents • 1.18 MB
BOQ_861529.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .