REPAIRS TO CERTAIN PLUMBING, TILING, JOINERY, SANITARY, PLASTERING AND OTHER MISC WORKS OFFICERS MARRIED ACCN AT AWASTHI MARG, BAREILLY ROAD AND SIKH LI OFFRS MESS AT FATEHGARH CANTT.

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as soecified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

M&L non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc. 0.18 sqm but n.exc. 0.38 sqm in floors coloured tiles etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over screed bed or bedding layer of mortar CM (1:6) , 15mm thick ,complete all as specified and directed.

M&L glazed ceramic coloured tiles 350 x 250 x 7 mm th/450 x 350 x 7 mm th thick as in vertical surfaces set and jointed in neat cement slurry and jointed or coloured cement to match etc complete laid over screed bed or bedding layer of mortar CM (1:4) , 10mm thick ,all as specified and directed.

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed 1:6 CM complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

M & L for 15mm thick rendering or brick work or concrete surface in cm 1:4 finished even & smooth w/o using extra cement all as specified.

M&L 5mm thick cement plastering in cm 1:3 on on ceiling surfaces even and smooth without using extra cement complete all as specified

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats ) including making good of distrubed surfaces to match with the existing surfaces as before complete all as specified and directed.

-ditto- as above but for exc 1.50 sqm but n.exc 4Sqm…ditto as above….

S&F factory made Steel ventilators , fixed type, complete with glazing bars/gauzed portion dovetailed or welded etc complete all as specified and directed.

S&F factory made Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded etc complete all as specified and directed.

S&F factory made Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with out glazing bars , dovetailed or welded etc complete all as specified and directed.

S & F MS work as in window guard bars, plain, let in and fixed independently in wooden frames etc, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed

M & L for PCC 1 : 3 : 6 type C1 using 20 mm graded stone aggregate as in fixing of hold fast including necessary form work complete all as specifed and directed.

S&F mild steel framed work of angle or any other section (grade 410 - 0 or Fe 310-0) as in door and door frame, gates of angle frame work etc including necessary welding etc complete all as specified and directed.

S&F 30 mm thick Factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorativetype wiremesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately).

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorativetype flush door type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately)

S&F Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Dismantling boarding as in kitchen cupboard, drawers, cupboard incl chowkhats etc. fixed in any position complete all as specified and directed.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type board of size 6mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick solid decorative type for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 12mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S&F for auto closing 15-22mm concealed hinges, 2 holes complete as for kitchen cupboard all as specified and directed.

S&F for soft closing cold rolled steel drawer channel with telescopic ball bearing,latch,etc. complete all as specified and directed.

S&F for brass Drawer pulls/handle, 3 screw plate with fixed dished pull; 80 mm to 100mm long complete all as specified and directed.

S&F for 75mm Brass handles, cast type,polished bright complete all as specified and directed.

Supply & fixed 40mm dia brass knobs complete all as specified & directed

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, wodden beads to steel windows/wodden doors complete all as specified & directed

S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, fixed in aluminium windows/vent complete all as specified & directed

S&F Aluminium anodised barrel tower bolts of extruded section of 200mm size etc complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F 125mm hasp and staple, aluminium anodised, incl mils steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed

S&F Aluminium handles, cast type anodised of size 150mm etc complete all as specified and directed.

S&F 300 mm long Aluminium alloy. anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F stainles steel butt hinges of size 100mm medium weight complete all as specified and directed.

S & F in repairs stainless steel decorative curtain rod of 25 mm bore with 1mm thick including brakets 02 nos finalie 02 nos) etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S & F sheet glass ordinary quality 3 mm thick and glazing with oil putty or fixed with bead / glazing pins in squares n.exc. 0.5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

S & F continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when opened) 30 mm etc complete all as specified and as direced.

S & F in repair mild steel helical door spring 300 mm longe ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M & L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

S&F in repair door seal with brush complete all as specified as directed

S & F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connection union to pipe overall size 914 mm x 460 mm ,bowl size 405 mm x 354 mm complete all as specified and directed.

S & F in repairs Stainless steel kitchen plate rack 900 x 600 and made out of 1 mm thick stainless steel sheet complete all as directed by Engr in Charge.

S&F chromium plated grating doom 100mm dia with or without waste hole etc complete all as specified and directed.

S&F CP brass Health Faucet with flexible pipe 1.00 m tube and hook fixed for EWC suitable for 15mm bore of pipe etc complete all as specified and directed.

S&F CP brass jet spray with flexible pipe 1.50m long fixed for EWC suitable for 15mm bore of pipe etc complete all as specified and directed.

Dismantling of water tanks capacity exc 250 ltrs and n.exc 500 ltrs and removing to store complete all as specified and directed.

S & F 500 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Dismantling of water tanks capacity exc 500 ltrs and n.exc 1000 ltrs and removing to store complete all as specified and directed.

S & F 1000 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia and waste pipe complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern) white including fixing bolts and fixtures incl white seat cover etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan two piece wall hung type complete with cover white including fixing bolts and fixtures etc complete all as specified and directed.

S&F in repair Vireous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) complete all as specified and directed.

S&F in repairs stop valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed etc complete all as specified and directed.

S&F in repairs angle valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed etc complete all as specified and directed.

S&F in repairs shower concealed stop valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with long shank and capstan head for (Bath shower) screwed for iron pipe and fixed including making good exisiting surfaces complete all as specified and directed.

S&F in repair 15mm bore Chromium plated Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S & F in repairs brass chromium plated showe rose 125mm size with shower arm complete all as specified an directed by Engineer - in - Charge.

S & F in rep PVC ( SWR pipe ) 110 mm bore rain water pipe including removing old pipe and making good the disturbed surfaces in CM 1:4 or PCC 1:2:4 complete all as specified and directed.

S&F in repair PVC (SWR) bends of radius 110 mm complete all as specified and directed.

Disconnecting existing tanks exc. 500 but n. exc. 1000 Ltr Capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including taking down ball valves 15mm/20mm and refixing and Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.complete all as specified and directed.

Taking up or down steel 15 mm dia tubing and connections,complete all aspecified and directed.

Taking up or down steel 20 mm dia tubing and connections,complete all aspecified and directed.

M&L for laying 15 mm dia GI medium grade tubing incl all fittings laid in floors /fixed on walls complete all as directed.

M&L for laying 20 mm dia GI medium grade tubing incl all fittings laid in floors /fixed on walls complete all as directed.

S&F in repairs sink mixer with swan neck 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S&F in repairs wall mixer with L-band(provision of overhead shower) 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S&F in repairs basin mixer 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S&F in repairs 15mm Pillar taps, fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwedshanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.

Supply & Fixing in repair 32 mm dia PVC Waste pipe suitable for Wash hand basin/kitchen sink complete all as specified and directed.

M&L for Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over a coat of primer complete all as specified and directed.

M&L Preparation of Newly Plastered surfaces of Ceiling and applying Three coats of White Washing complete all as specified and directed.

M&L for Preparation of Newly Plastered surfaces and applying two coat of Cement Base Paint over a coat of primer on walls complete all as specified and directed.

M/S Arvind Electricals

M/S Shree Gopal Engineers & Contractor

M/S SRI JAGDAMBE TRADERS