SPL REPAIR TO SUMMER APPLIANCES AND AIR CONDITIONERS AT UNIT 524 AND CERTAIN SANCTIONED/SPECIAL REPAIR WORKS AT MISA CAMP (PHASE-23) UNDER GE (S) TEZPUR

Amount

Surface dressing not exc 15 cm deep in soft/loose soil,complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavation over area n exc 1.50 mtr in depth and getting out in hard/dense soil complete all as specified and directed

Excavation in trenches n exc 1.5 mtr depth nd n exc 1.5 m wide in soft/loose soil and getting out,complete all as specified and as directed.

Removing excavated soil to distance n exc 50 mtr and deposited as directed by Engr-in -Charge.

Returning/Filling in trenches in layer n exc 25 cm thick including watering well ramming etc,complete all as specified and as directed.

M&L Loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells ,complete all as specified and as directed.

M&L for Hard core of broken stone or boulders spread thickness of gauge n. exc 63mm deposited spread and levelled in layers n. exc 15 cm thick watered and rammed to a true surface,complete all as specified and as directed.

M&L sand filling under floor or in foundations or in trenches including watering and consolidation complete all as specified and directed.

Spreading,levelling,watering and well ramming the earth filling under floor not exc. 25cm thick in layers,complete all as specified and as directed.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone agg as in foundation filling mass concrete,complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded aggregate as in bed to septic tank or in sub base,complete all as specified and as directed.

M&L Damp proof course 40 mm thk in PCC 1:2:4 type B-0 to horizontal or vertical surface,complete all as specified and as directed.

M & L 100 mm thick cement concrete tye B-2, 1:2:4 ( 40 mm graded aggregate ) as in sub base of floor,complete all as specified and as directed.

M & L 75mm th PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified.

M&L Forming 12mm thick expansion joints for 100mm thick concrete slab filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade'A',complete all as specified and as directed.

M&L for RCC (1:2:4) type BI (using 20mm graded stone aggt) as in precast slab set in CM (1:4),complete all as specified and as directed.

S&F TMT bar 5 mm dia and over upto including 10 m dia in stirrups, spacers and binder etc,cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia,complete all as specified and as directed.

Dismantling water tanks of capacity exc 500 l & not exc 1000 litres and removing to store,complete all as specified and as directed.

Taking up or down steel tubing of size 15 mm and connections, including cleaning for refixing or removal to store,complete all as specified and as directed.

Taking up or down steel tubing of size 20 mm and connections, including cleaning for refixing or removal to store,complete all as specified and as directed.

S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors,complete all as specified and as directed.

S&F 20mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors,complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions, arches pillars etc. Complete all as specified and as directed.

M & L brick work built in CM 1:4 with sub class "B"old size bricks straight or curved on plan exceeding 6 m mean radius,complete all as specified and as directed.

M&L brick work using sub class B brick (old size) curved or straight in plan exc 6 mtr mean radius in cm (1:6),complete all as specified and as directed.

M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified.

M&L for brickwork, with subclass ‘B’ bricks in one brick thick honey comb work, built in CM(1:4),complete all as specified and as directed.

Demolition and breaking up drain pipes 100 mm dia unserviceable salt glazed stone ware drain pipes set in cement mortar all as specified and directed.

S & F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. Complete all as specified and as directed.

S&F steel window without glazing bars but with FI/Z section for fixing of gauze and steel handle, peg stay complete all as specified and directed by Engineer-in-Charge

S&F Steel window side hung shutters including box type hinges with steel handle and steel pegs stay complete with glazing bars and fly proofing Complete all as specified and as directed.

S & F 3mm thick figured glass n exc 0.5 sqm in each pane glazing with oil putty,complete all as specified and as directed.

S&F 3 mm thick ordinary quality sheet glass in squares n exc 0.5 sqm in each pane glazing with oil putty,complete all as specified and as directed.

M&L for galvanised mild steel wire cloth of 0.56mm dia and average aperture of 1.18mm and fixed in position,complete all as specified and as directed.

Taking down chowkhats incl shutterrs (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each,complete all as specified and as directed.

Taking down chowkhats incl shutterrs n exc 1.5 sqm,complete all as specified and as directed.

S & F PVC door with chowkhats frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing,complete all as specified and as directed.

S & F 35 mm thick flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side,complete all as specified and as directed.

S & F Factory made solid panel pvc door shutter with chowkhats 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing,complete all as specified and as directed.

Preparation of new steel surfaces exc 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed.

Taking down cement plaster on brick/concrete surfaces of walls and ceiling including racking out jointing hacking for key, scrubbing down with water etc,complete all as specified and as directed.

M&L 15mm thick rendering in CM 1:4 on fair faces of brick work with using WPC @ 3% finished even and smooth without using extra cement. Note-WPC shall be measured and paid seperatly under relevent Item.

M&L 15 mm thick plastering on other than fair faces of wall surfaces in cm (1:6) finished even and smooth without using extra cement complete all as specified and directed

Supply only water proofing compound,complete all as specified and as directed.

M&L screed bed or bedding layer 15mm thick in Cement Mortar 1:6 for laying floor finishes/tiles, complete all as specified and as directed

M&L for rendering or bedding layer 10mm thick in Cement Mortar 1:4 on walls, etc. for fixing tiles as skirtings, dados, etc, complete all as specified and directed.

M&L three coats of white wash to internal wall including preparation of new surfaces,complete all as specified and directed.

M&L three coats of white washing to ceiling including preparation of new surfaces,complete all as specified and directed.

M & L for two coats of exterior emulsion antifungus paint by smart painting method over a coat of primer over a coat of 3 mm thick wall care putty to wall including preparation of new surface,complete all as specified and directed.

M&L applying two coats of distemper by smart painting method over a coat of primer over a coat of 3mm thick a layer of wall care putty on walls,complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,complete all as specified and as directed.

S&F non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 400mmx400 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match,complete all as specified and directed.

M & L for glazed ceramic wall tiles of size 300 x450 x 7 to 8mm thick set jointed in neat cement slurry and pointed with white cement to match the tiles complete in skirting/dado,complete all as specified and directed.

M & L for Vitrified Ceramic tiles of dark shade 10 mm thick (square/ rectangular) polished, area of each tiles lot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,complete all as specified and directed.

All as per item no 56 above, but in vertical walls/skirting

S&F in repairs vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding 1:2,complete all as specified and directed.

S&F in repairs 10 lits capacity PVC low level flushing cistern including pull chain & flush pipe, connection pipe etc complete all as specified & directed.

S&F 15 mm dia High density polyethylene pipes(HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc,complete all as specified and directed.

S & F in repairs Brass chromium plated bottle traps of bore 40 mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed,complete all as specified and directed.

S & F in repairs connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S&F in repairs 15mm bore fancy type chromium plated pillar tap with crutch or butterfly handle screwed down for iron pipes,complete all as specified and directed.

S&F in repairs 15mm bore fancy type chromium plated bib tap with crutch or butterfly handle screwed down for iron pipes,complete all as specified and directed.

S&F in repairs 15 mm bore stop valve cast copper alloy, screwed down, high pressure, with crutel or butterfly handle, screwed both ends for iron pipe or for unions,complete all as specified and directed.

S & F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms),complete all as specified and directed.

M & L salt glazed stone ware drain pipes grade A 100mm dia laid in trenches and jointed as specified.

M&L for supply, laying, jointing and testing salt glazed stone ware drain pipe, grade 'A' 150mm bore (internal dia) laid in trenches on concrete bed to required slope jointed and tested complete all as specified and directed by the Engineer-in-Charge. (Note:- Excavation/earth work and concrete bed shall be measured and paid for separately)

M&L plain cement Concrete 1:3:6 type C2(Using 40mm graded agg) for concrete bed to drain pipes of 150mm bore, under and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed by Engineer-in-Charge

S&F in repair wall mixer , 3 in -1 system with provision for over head shower, chromium plated, fancy type, 15 mm bore complete all as specified and directed

S & F in repairs CP Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms),complete all as specified and directed.

S & F in repair 15mm Angle Stop valves cast copper alloy,fancy type with chromium plated for iron pipe or for unions and fixed ,complete all as specified and directed.

S&F in repairs 15mm bore 125mm size type brass chromium plated shower rose, complete all as specified.

S & F in repairs Soap dish of size 160x 160x90mm, any type, fixed to plugs with chromium plated brass screws,complete all as specified and directed.

S & F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as directed.

S&F 150mm long aluminium handle, cast type, anodised,complete all as specified and directed.

S&F 200 mm aluminium anodised barrel tower bolt, of extruded section and fixed in position,complete all as specified and directed.

S&F 100mm long aluminum anodized barrel tower bolts of extruded section,complete all as specified and as directed.

S&F 100mm size MS butt hinges, medium weight, cold rolled,complete all as specified and directed.

S&F in repairs 20 mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed

Materials and Labour for mid steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for MS framed work of angle, tee, F.I, conforming to Fe-290 (Gde E-165), as in roof trusses including distance pieces, cleats etc. welding or riveted complete all as specified and directed.

S&F MS Hold fast confirming to Fe-290 Gde E-165,complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length 150mm complete all as specified

S & F Vitreous China wash down water closet pan (one piece), white connection to trap, and to flushing pipe, anti-syphonic pipe, etc complete including making good of floor (Excluding fixing bolts, flushing cistern and flush pipe) completemake cera cat part No EWC-CAm (Strap 250 mm),complete all as specified and directed.

S & F of central hole basin mixer, with round spout with pop up waste system with 450mm long copper pipes & brass nuts ( Make :Jaquar continental series cat No169 or equivalent of Marc/Parryware/Prayag.

S&F in repair Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S&F in repair health faucet with complete fittings, complete all as specified and as directed by engr in charge .

S&F 110mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints fixed to walls,complete all as specified and directed.

S&F 110mm bore P.V.C (S.W.R) bend,complete all as specified and directed.

S&F 110mm bore P.V.C (S.W.R)T junction equal or unequal,complete all as specified and directed.

S&F 110mm bore P.V.C vent cowl,complete all as specified and directed.

S&F 75 mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints fixed to walls,complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.

M & L 6mm thick non asbestos fibre cement building board fixed/inserted to timber/GI/Aluminium frame work with screws, as in ceiling,complete all as specified and directed.

S&F anodised aluminium snap grid frame work of 605x605mm size for false ceiling all as specified and directed.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

S&F in replacement steel water tubing 80 mm dia of bore light grade galvanised with all fittings laid in trenches / fixing with surface of wall after drawn through electric cable by means of nuts bolt and washers all as directed .

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steel strip and overall PVC sheathed nominal cross sectional area 300 sqmm 3.5 core and testing complete all as specified and directed.

M&L for Boring holes horizontally under Road without damaging the surface of Road (minimum 1.0 METRE below the Road Surface/footpath with the help of GI Tubing not exc. 80mm bore (dia) for passing of UG Cable, complete all as specified and directed NOTE: GI Pipe laid will be measured and paid separately under appropriate Item.

Supply, installation, testing and commissioning 3 phase and neutral, 415 volts indoor type, CPRI approved ,factory made free standing floor mounting, dust and vermin proof, cubical type LT panel fabricated from 3.15mm thick CRCA sheet for outer shell and 2.0 mm for inner shell with angle iron frame of 50 X 50 X 6 mm, double door, front and back openable type , double/triple door system (cubical panel in three compartment separate compartmental for each outgoing from main Incomer of 630 Amp ACB i.e. three outgoing main feeders, hinging opening, rubber lining locking arrangement with anticorrosive coating and finally epoxy polyester power coating with pure polyster Siemens grey structural RAL-7032 shade protection class IP-54 fully compartmentalized design with 4 Nos of Bus bar made of copper of ETP grade suitable for 1000 Amps (Size of Copper strip should not less than 2 (double strip) X 40 mm X 8mm for each phase and neutral) pre-wired with suitable size of copper strip/copper wire with colour code for connecting outgoing MCCB/MCB’s including suitable aluminum earth strips conforming to IS with danger notice plate necessary cable giants , cable connection with proper lugs PCC foundation and pedestal for fixing pillar feeder box/LT Panel with PCC1:5:10 , 15 cm thick in foundation brick (Fly Ash)/PCC block work in CM 1:6 rendering 1.6 on exposed surface and 100 mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in padding on top and grouting bolts etc for panel . The platform shall be 450 mm height above ground level all as specified with supply and fixing the following:

Item No 103 Contd.... (ii) MCCB 63 Amps, rating 4 pole , 415V,AC 50 HZ, thermal release range 50-63 Amp with adjustable overload setting and short circuit setting Ics -100 % Icu service breaking capacity 25 KA – 03 Nos with rotary handle. (iii) MCCB 63 Amp rating 4 pole, 415 V, AC-50 HZ thermal release range 50-63 Amp with adjustable overload setting and short circuit setting Ics-100%Icu ,service breaking capacity 25 KA -01 Nos with rotary handle. MCB TPN 63 Amp – 01 No. (B) Outgoing 2: (i) Open execution type Change over switch disconnector , Confir to IEC 60947-3 IS /IEC 60947-3 Manual changeover of 160 Amps 415 V AC 23 A, 4 pole with site convertible fuse version for open execution , site convertible dual shift position with staggered terminals and extended operating handle – 01 No. (ii) MCCB 63 Amps, rating 4 pole , 415V,AC 50 HZ, thermal release range 50-63 Amp with adjustable overload setting and short circuit setting Ics -100 % Icu service breaking capacity 25 KA – 03 Nos with rotary handle. (C) Outgoing 3: (i) Open execution type Change over switch disconnector , Confir to IEC 60947-3, IS/IEC 60947-3 Manual changeover of 400 Amps, 415V, AC 23A, 4 pole with site convertible fuse version for open execution , site convertible dual shift position with staggered terminals and extended operating handle – 01 No. (ii) MCCB 400 Amps, rating 4 pole , 415V, AC 50 HZ, thermal release range 320-400 Amp with adjustable overload setting and short circuit setting, Ics -100 % Icu, service breaking capacity 36 KA – 01 Nos with rotary handle. (iii) MCCB 315 Amps rating, 4 pole , 415 V, AC 50 HZ, thermal release range 250-315 Amp with adjustable overload setting and short circuit setting, Ics -100 % Icu, service breaking capacity 36 KA – 01 Nos with rotary handle. (iv) MCCB 250 Amps rating, 4 pole , 415 V, AC 50 HZ, thermal release range 200-250 Amp with adjustable overload setting and short circuit setting, Ics -100 % Icu, service breaking capacity 36 KA – 01 No with rotary handle.

Item No 103 Contd.... (v) MCCB 160 Amps rating, 4 pole , 415 V, AC 50 HZ, thermal release range 125-160 Amp with adjustable overload setting and short circuit setting, Ics -100 % Icu, service breaking capacity 25 KA – 01 No with rotary handle. Note: (i) All ACB/MCCB/MCB should be Make: L&T/Legrand/Schnider/Seimens. (ii) Drawing of LT panel and Make of Items shall be get approved from GE before ordering the panel (iii) Cost of lugs for cable and cable gland etc also included in Unit rate of panel (iv) Rotary handles to be provided for aa MCCB and changeover for control and operation of MCCB. (v) The rating of copper bus bar to outgoing MCCB/MCB’s shall not be less than 1.5 times the rated current of individual ougoing feeders /MCCB. (vi) Independent Amper meter with CTs to be provided with all MCCB’s. (vii) Apreader terminals and Pahse barriers to be provided with all MCCB’s (viii) Rate of panel include refixing of all cables in panel which are dismantle & taking out from old u/s panel.

Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI strip 32x6mm as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI light grade watering pipe, 40mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge.

M & L for point wiring for one light/fan point/call bell controlled by one way switch. with 1.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLS cable 1100 votls grade with stranded copper conductor and connected to common earth dolly complete for housing the switches, socket outlets, fan regulators etc. for the following (Rate deemed to be inclusive of cutting chases and making good disturbed surface).

All as per Item No 108 but one socket outlet 5 pin 6 amps on independent board.

All as per Item No 108 but one 5 amps socket outlet on same board with other switch.

M & L for point wiring with 2.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLS cable 1100 votls grade with stranded copper conductor and connected to common earth dolly, complete for one socket outlet 6 pin 15/16 amps on independent board (Rate deemed to be inclusive of cutting chases and making good disturbed surface).

Material and labour for point for one light/fan point/call bell controlled by one way switch wiring with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn with PVC casing caping/ conduit pipe with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly all as specified and directed.

All as per Item No 112 but one socket outlet 5 pin 6 amps on independent board.

All as per Item No 112 but one 5 amps socket outlet on same board with other switch.

Material and labour for point wiring with 2.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn with PVC casing caping/ conduit pipe with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly all as specified and directed.

Supply and fix socket, flush button 240 Volts 5 Amps, complete all as specified.

Supply and fix, switch socket combination 3 pin, 5 Amps flush type 240 Volts all as specified and directed.

M&L for fixing of Switch Socket Combination 5/16 Amps,5 in 1 flush type inclduing all as specified and directed..

Supply and fix switch piano, flush button, single pole, one way,240 Volts 5 Amps, complete all as specified.

Supply and fix Modular switch one way 10 Amp.

Supply and fix modular socket outlet 2 in 1, 3 pin 10 A.

Supply and fix modular socket outlet 2 in 1, 3 pin 20 Amps

Supply and fix Modular switch one way 20 Amp.

Material and labour for ceiling rose polycarbonate isolated body 3 ways terminals.

Supply and fix modular type electronic fan regulator.

Supply and fixing modular white cover plate with frame 3 modules complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 8 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 3 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 8 modules complete all as specified and as directed.

Supply and fix Surface mounting plastic box 4X4 inch size including all fixing accessories complete all as specified and directed.

Supply and fix Surface mounting plastic box 4X7 inch size including all fixing accories complete all as specified and directed.

Supply and fix Surface mounting plastic box 8X6 inch size including all fixing accories complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20 W 4 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB SPN) of single pole and neutral and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB SP) of single poles and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.

Supply and fix sheet metal enclosures SPN DB's 6 way when MCBs to be used 240 Volts, double door.

S&F 1100 Volts grade heavy duty cable PVC insulated standred twin core flat or circular aluminium conductor of size 10 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire complete all as specified and directed.

Supply and installed split air conditioner units indoor & outdoor with copper condenser complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and ISEER 3.6 of capacity of 2.0 TR INV AC including refrigarant copper pipe, bracket fabricated using MS angle iron not less than size 50x50x6mm including necessary nuts, bolts washer etc as required at site for mounting outdoor unit of AC on wall all as directed by engr-in-charge at site. Make Voltas Model No. SAC 245V ADZ (R32) INV or equivalent make in Blue star/LG/Samsung/Daikin

Supply and installed split air conditioner units indoor & outdoor with copper condenser complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and ISEER 3.6 of capacity of 1.5 TR INV AC including refrigarant copper pipe, bracket fabricated using MS angle iron not less than size 50x50x6mm including necessary nuts, bolts washer etc as required at site for mounting outdoor unit of AC on wall all as directed by engr-in-charge at site. Make Voltas Model No. 185VJZJT or equivalent make in Blue star/LG/Samsung/Daikin

S&F 5 KVA Electronic type Voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130V to 280V with output voltage stabilized at 230 V with accuracy of ± 2.0%, current carrying capacity suitable for 2 TR split AC all as specifed and directed. Make V-Guard Model No VGB 500 Digital or equivalent in Volini/vertex/Microtek

S&F 4 KVA Electronic type Voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130V to 280V with output voltage stabilized at 230 V with accuracy of ± 2.0%, current carrying capacity suitable for 1.5 TR split AC all as specifed and directed. Make V-Guard Model No VNS 400 Digital or equivalent in Volini/vertex/Microtek

Supply and fix Refrigerator of capacity 320 Ltrs electric driven (single phase),.BEE 5 star rated all as specified and directed. Make Whirlpool Model No. INE 220211611 or equivalent make in LG/Samsung/Voltas/Usha

Supply , installation, commissioning of Water Cooler 40/80 Ltrs fully stainless steel, electric driven (single Phase) having Appox storage capacity of 40 litres and nominal cooling capacity of 80 Litres per hour complete all as directed. Make Usha Model No. 6211220004NU or equiavalent in Blue star/Voltas

Supply, installation, commissioning of Glass Top Deep Freezer 320 ltrs capacity single phase 240 volt, 50 Hz all as specified and directed. Make Voltas Model No. CF GT 320 DD P or equivalent make in Blue star/Samsung

S&F 1.0 KVA Electronic type Voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 150V to 270V with output voltage stabilized at 230 V with accuracy of ± 2.0%, current carrying capacity suitable for water cooler/refrigerator/Deep freezer all as specifed and directed. Make V-Guard Model No VGSD 100 or equivalent in Volini/vertex/Microtek

S&F water purifier based on UV/UF/MC technology make the water free from virus and bacteria with instantly charges essential micronutrients like calcium & mangesium all as specified and directed. Make Eureka forbes Model Neo or equivalent in kent/livPure

S&F in replacement of Sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 32 Amps, 240 volts capacity and tested on completion complete all as specified and directed.

Overhauling/servicing of 20 KVA servo controlled voltage stabilizer, 3 phase, input, voltage range 340-480 volt, output voltage range 415 + 2.5 % volt, 50 Hz, oil cooled copper wiring with minor parts change, oil top up and checking of health serviceability, change of unsv voltmeter, amp meter, push button, Indicator LED bulb, inspecting all nut balls, pin etc all as specified and directed.

Overhauling/servicing of 50 KVA servo controlled voltage stabilizer, 3 phase, input, voltage range 340-480 volt, output voltage range 415 + 2.5 % volt, 50 Hz, oil cooled copper wiring with minor parts change, oil top up and checking of health serviceability, change of unsv voltmeter, amp meter, push button , Indicator LED bulb, inspecting all nut balls, pin etc all as specified and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)