SPL REPAIR TO BLDG NO T-5 AND PROVN OF GUARD ROOM WITH ATT TOILET OF SUP DEPOT ASC UNDER GE BARRACKPORE

Surface excavation n.exc 30 cm deep and averaging 15cm deep in soft/loose soil and getting out complete all as specified and as directed.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation, laying of pipe or for shafts, wells cesspits, man holes, pier holes, laying of cable etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm in soft / loose soil complete all as specified and as directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

Removing excavated soil to distance exc. 250 m but n exc. 500m and depositing where directed complete all as specified and as directed.

M&L for hard core with broken stone or boulder of gauge not exc 63 mm, deposited , spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed.

Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M & L for PCC 1:4:8 Type D-2 ( Using 40 mm graded crushed stone aggregate) as in foundation , filling, and mass concrete complete all as specified and directed.

M & L for PCC 1:3:6, type C2 (using 40 mm graded crushed stone aggregate) as in surface channel or drain including necessary form work complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M & L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and as directed.

M & L for Forming 12 mm thick expansion joints for 100 mm thick slab filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and as directed.

M & L for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded crushed stone aggregates) as in path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in foundations, footings, foundation beams, plinth beams, bases for columns, etc. complete all as specified and as directed. Note : Reinforcement will be measured and paid seperately.

M & L for PCC 1:2:4, type B0 (using 12.5 mm graded crushed stone aggregate) as in coping, cills, hold fasts, fixing of post, water trough etc. including necessary formwork (straight or curved) complete all as specified and as directed.

M&L for RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in columns, pillar, piers, posts and struts etc. complete all as specified and as directed.

M&L for RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in Slabs supported on walls, beams, and column in floors, roof, landing, balconies, canopies, deck slab and in shelves and like etc. complete all as specified and as directed.

Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed.

Use and waste formwork to soffits and sides of suspended slabs such as roof slabs, floor slabs, landings sun shade, chajja, floors, roofs, landings, balconies etc., n exc 200 mm thick (horizontal or sloping) for fair finished surface of concrete complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed.

M&L for mild steel TMT bars 8 mm dia and over upto and including 10mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed.

Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions (Square, Circular rectangular or polygonal) for rough finished flat surfaces of concrete complete all as specified and as directed.

Demolition of brick or stone masonry work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound @ 200Ml per bag(50Kg) of cement or as per manufacture's instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of 1.5 mm thick (average) white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distemper complete all specified and as directed

M&L for complete removal of existing finishes/treatment of wall and applying two coat of oil bound distemper over one coat of primer including 1.5 mm thick(average) wall care putty complete all as specified and as directe.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm using Airless Paint Primer Sprayer using smart technique over 1.5 mm thick (average) wall care putty on newly plastered surface of wall including preparation complete all as specified and as directed.

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using Airless Paint Primer Sprayer using smart technique, on newly plastered surface of wall, cornices complete all as specified and as directed .

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm using Airless Paint Primer Sprayer using smart technique over 1.5 mm thick (average) wall care putty on old surfaces of wall including complete removal of existing old treatment including, preparation of surfaces of wall, cornices by wire brushing, rubbing down complete all as specified and as directed .

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for glazed light coloured/printed ceramic tiles 350x250x7mm/450x350x7mm thick in vertical surfaces of wall such as skirting dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) tiles machine cut as in wall/pillars over 10mm thick CM (1:4) as in backing layer & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing

Providing edge moulding to 18-20mm thick granite of any type of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from frame) complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm complete all as specified and directed.

M & L for 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S & F 30 mm thick Flush door shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S&F 35mm thick second class ha

rd wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F 35mm thick 2nd class hard wood Plain, framed, panelled shutters (any no of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

M & L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Per 10 RM

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm size aluminium alloy with galvanized mild steel hinge pin, anodised and fixed, type C-21 butt hinges, complete all as specified and as directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S & F 100 mm size stainless steel butt hinges, complete all as specified and as directed.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators, partitions etc. with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters (sliding type), aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified and as directed.

S&F 100mm size aluminium handles, cast type, anodised complete all as specified and as directed.

S & F 250 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof coveri

S & F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed.

M&L for 1.00 mm Plain, galvanised, mild steel sheeting, in valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating fixed with 'J' and washers or screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410-w (Gde-E250) quality A all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and directed.

S&F mild steel rolling shutter 1.25mm thick, gear operated type with chain wheel and hand chain, push pull or manual type without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated complete including taking down old rolling shutter of any description complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S & F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed.

S & F GI tubing15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directe.

S & F GI tubing 20 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F bib taps 15mm dia long body with wall flange fancy type chromium plated cast copper alloy with capstan head screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets and pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia 600mm long PVC connection pipe complete all as specified and as directed.

S&F 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets,PVC connection pipe 15mm dia, 450mm long etc complete all as specified and as directed.

S & F vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor/wall complete all as specified and as directed. Note : Earth work shall be measured and paid separately under respective item.

S&F 110 mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F vitreous China bowl, urinal flat back or corner wall type, size of 465X 355 X 265 mm white (minimum) with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, PVC connection pipe 15mm dia 450mm long, CP waste coupling 32mm (half or full thread) etc pointing around urinal back in cement etc. complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece , single (single Y) equal or unequal with access door complete all as specified and as directed

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F Grating doom 100 mm dia of PTMT (min. weight 25 gms) complete all as specified and directed.

S & F 75mm dia cast iron floor trap / Nahani trap including grating jointing to waste pipe in fixed in cement concrete type B1 (1:2:4) , using 20 mm graded crushed stone aggregates complete all as specified and as directed.

M & L for writing letters or figures (Block, Roman, italic or Indian) after cleaning the existing surfaces n.exc 30 cm heigh complete all as specified and as directed.

S&F GI tubing 20 mm bore, medium grade with all fittings and fixed complete laid in trenches/wall/floor complete all as specified and as directed.

M & L for writing stops, commas, short lines dashes, hyphens, brackets, etc. after cleaning the existing surfaces complete all as specified and as directed.

S&F stop valves, 25mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F stop valves, 20mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

M&L for Cutting the existing pipe of size 25 mm pipe and making new connection including provision of TEE complete all as specified and as directed.

M&L for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in and including PVC conduit with cable 1.5 Sqmm size 1100 volts grade conforming to IS:694 and terminate to flush box of required size suitable mounting modular switches and sockets including single core multi stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire connected to earth and common earth dolly drawn in same concealed conduit for one light/fan/wall fan/exhaust fan/bell point controlled by one No, one way 5/6/10 Amp switch complete all as specified and as directed. Note: Cutting chases for concealed type point wiring including making good the same with plaster/putty and Modular boxes with cover plate is deemed to be included in quoted rate.

S&F GI tubing 25 mm bore, medium grade with all fittings and fixed complete laid in trenches/wall/floor complete all as specified and as directed. Note : For item no 94 & 95 Earth work shall be measured and paid separately under respective item.

S&F in repairs, stop valves, 40mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F Modular switch 1 way 6A/10A, 1 module, single pole one way 240 volts complete all as specified and as directed.

S&F modular switch socket combination 2 in 1, 6 Amp/10Amp, 240 volts, shuttered type complete all as specified and as directed.

S&F Modular switch socket combination shuttered type, 6/16A or 10/20Amp, 240 volts. 2/3 pin combined 2 module complete all as specified and as directed.

S&F lamp holder, insulated, PVC / polycarbonate /bakelite body including 12W LED bulb complete all as specified and as directed.

S&F ceiling rose surface bakelite, 65x50mm three terminal complete all as specified and as directed.

All as per item serial No 100 here-in-before but for One 3 pin 5/6/10 Amp switch socket outlet on independent board.

All as per item serial No 100 here-in-before but with 2.5 Sqmm single core multistranded

S&F decorative box type 20/22-watt light fitting, blue coloured end caps, pre-wired, and including providing PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and including LED T-8 tubular lamp of 20 Watt extruded aluminium/PC body and PC diffuser complete with inbuilt LED driver complete all as specified and as directed. Make of light fitting: Crompton Model No.DMLN1LT8-16/Havells Model REGALBATTENT8UPTO1X22WSSBSWH/Bajaj Model No BLRB-DB 218 or equivalent make in Philips Make of LED Rod Crompton Model No.LT8-20-865-2 / Havells Code No.PHOTONULTRA1213T8SSTL20WLED865SPC/Bajaj Model No BLRB20CW LED or equivalent make in Philips

S&F Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagonal bulk head black-lit LED10 W -IP-66 luminaire comprising of high brightness LEDs complete all as specified and as directed. Make:- Havells Model HEXAFT10WLED857SSYMBOPC or equivalent Model of make : Philips / Crompton /Bajaj/Wipro.

copper conductor cable and earth continuity wire with 2.5 Sqmm cable for 6 pin 15/20 Amp socket outlet on independent board.

M & L Point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLSH cable, 1100 volts grade IS -694 marked, with multi stranded copper conductors and earth continuity wire with 1.5 Sqmm cable (including connecting to earth dolly) laid/fixed in stove enamelled steel conduit on walls/ceiling including sunk type pressed steel terminal box for One light/fan/exhaust fan point controlled by one number one way switch including taking down old point wiring complete all as specified and as directed. Note: Cutting chases for concealed type point wiring including making good the same with plaster/putty and MS box, screws, washers with cover plate are deemed to be included in quoted rate.

S & F switch flame proof rotary type with terminal box in LM6, 25A, double pole 250V complete all as specified and as directed.

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Havells/Crompton Greaves/Bajaj

S&F exhaust fan of any type/size sturdy engineering plastic exhaust fan 300 mm sweep,1200 rpm, 240Volts, AC, 50Hz as approved colour and connecting of electrical connections and testing including wall cutting finishing and fixing arrangements complete all as specified and as directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and as directed.

S&F in repairs, LED light fitting 1x16 Watt Flameproof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

S&F single pole & neutral DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed. Make :- Legrand Cat No 5076 11 or L&K Cat No DESPN008DDS or equivalent model in Siemens / Schneider/Havells.

S&F in repairs, Flameproof cum Waterproof LED Bulk Head light fitting of 15W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

S&F 1200mm sweep BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 230 M³/Min, 350 RPM (tolerance as per IS:374-2019), THD less than 10%,including remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete all as specified and as directed.

S&F MCBs, SPN 40 to 63 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.

S&F MCBs, SP 6 to 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.

S & F in repairs, factory made, sheet steel distribution boards, TPN, 4 Way, double door, protection class IP-43 with min 100 Amp rating copper bus bar, provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed . Make :- Legrand Cat No 5076 70 or L&K Cat No DETPE004DDS or equivalent. model in Siemens / Schneider/Havells

S&F in repairs, single pole & neutral DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed. Make :- Legrand Cat No 5076 11 or L&K Cat No DESPN008DDS or equivalent model in Siemens / Schneider/Havells.

S&F MCB FP 40 to 63 Amps 10 KA,"C" series ,AC, 415Volts, 50 Hz, ISI Marked complete all as specified and as directed. Make:- Legrand/Hager/Havells or as approved make .

Supply, laying and testing XLPE Insulated , PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4 core laid in trenches /floor or fixed on wall/pole in existing or new location including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

M&L for Sub main wiring with 2 runs of 4 sqmm, single core, FRLSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia rigid steel conduit ISI marked medium grade concealed conduit with all accessories such as Tees, Elbows, junction box, reducers etc as required alongwith one run of 4 sqmm single core FRLSH PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and as directed. Note: (i) 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with steel conduit altogether shall be measured as one unit. (ii) Cutting chases for concealed submain wiring for the above point and making good in cement mortar is deemed included in quoted rate.

M&L for sand cushioning with dry river sand in trenches for cushioning of underground cable including spreading, leveling, punning down the thickness of sand upto 18cm and consolidated complete all as specified and as directed. Note: Punned thickness of sand cushioning will be measured and paid.

M&L for sub class ‘B’ old size well burnt brick laid flat in trenches with length of brick perpendicular to length of cable, over the cable for protection of LT cable complete all as specified and as directed.

M&L for Sub main wiring with 2 runs of 6 sqmm, single core, FRLSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia rigid steel conduit ISI marked medium grade concealed conduit with all accessories such as Tees, Elbows, junction box, reducers etc as required alongwith one run of 6 sqmm single core FRLSH PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and as directed. Note: (i) 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with steel conduit altogether shall be measured as one unit. (ii) Cutting chases for concealed submain wiring for the above point and making good in cement mortar is deemed included in quoted rate.

M&L for Sub main wiring with 2 runs of 10 sqmm, single core, FRLSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia rigid steel conduit ISI marked medium grade concealed conduit with all accessories such as Tees, Elbows, junction box, reducers etc as required alongwith one run of 10 sqmm single core FRLSH PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and as directed. Note: (i) 2 run of 10 Sqmm cable and 1 run of 10 Sqmm cable along with steel conduit altogether shall be measured as one unit. (ii) Cutting chases for concealed submain wiring for the above point and making good in cement mortar is deemed included in quoted rate.

Supply, laying and testing XLPE Insulated , PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 50 sqmm 3.5 core laid in trenches /floor or fixed on wall/pole in existing or new location including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Supply and laying GI tubing 40mm bore medium grade with fittings laid in trenches, on pole and road crossing for protection of LT underground cables complete all as specified and as directed.

M&L for boring of hole under roads (minimum 1m bellow the road surface) with mechanical arrangement upto 80 mm dia without disturbing the top surface of the road for passing the water pipes/UG cable across the road complete all as specified and as directed.

S&F Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground fixed on epoxy based moulded insulator, drilling two Nos holes at each joint, one set of lead washers between strips two sets GI nut, bolt, washers gutties, screws etc as required including dismantling of old strip of any description complete all as specified and as directed. Note : Epoxy base moulded insulator, nut, bolt will be measured and paid separately under respective item.

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screws for fixing strips to test point including necessary fixing arrangement to fix test point terminal block to test point junction box including dis

mantling of old terminal block complete all as specified and as directed.

M & L for galvanised iron strip of size 32x6 mm fixed on wall with suitable epoxy base insulator on wall floors and connected to test point including bending, jointing at test points with 2 Nos GI nuts, bolts, with lead washers, jointing strips including dismantling of old strip of any description complete all as specified and as directed. Note : Epoxy base moulded insulator, nut, bolt will be measured and paid separately under respective item.

M & L for Air termination, single pointed, aluminium rod 12mm dia and 300mm long to be fixed on horizontal lightning conductor with suitable fixing arrangement including taking down old one complete all as specified and as directed.

M&L for earthing in replacement complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cm X 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specified and as directed.

S&F epoxy base insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, near to 50 mm height and 65 mm dia fixed on PCC blocks/on wall /on cover shed/on MS angle/on towers etc along with necessary fixing arrangement complete all as specified and as directed.