Kerala

Technical Eval

Works

Electrical Works

Constructing new 11kV UG Cable from Vellapil Mukku to Palayathumukku under Electrical Section Mayyanad.

Kerala State Electricity Board

Electrical Section Mayyanad | Kollam, Kerala

Amount: ₹12.7 LCloses: 22 Sept 2026Closed

Timeline

Published7 Sept 2026
Closed22 Sept 2026
Technical Evaluation6 Oct 2026
Award—

Bids

3 Bids6 Oct 2026

#	Company	Status
1	ACHUTHAN PILLAI G Accepted-Technical	Accepted-Technical Documents Submitted
2	Ashir Accepted-Technical	Accepted-Technical Documents Submitted
3	HASIF T Accepted-Technical	Accepted-Technical Documents Submitted

Tender Value

₹12.7 L

EMD Value

₹31,800

Closing Date

22 Sept 2026, 5:00 pmClosed

Tender Inviting Organisation

Name

EXECUTIVE ENGINEER

Address

PMU, EC KOLLAM

Work Description

Constructing new 11kV UG Cable from Vellapil Mukku to Palayathumukku under Electrical Section Mayyanad.

Tender Information

Tender ID

2026_KSEB_860568_2

Reference Number

ET No. 07/2026-27/14.07.2026

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Service

Period of Work

90 days

Location

Electrical Section Mayyanad

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical

RequiredScanned copy of bounden agreement in Kerala govt stamp paper worth Rs.200/- (.pdf)

RequiredScanned copy of PAN card and Adhaar (.pdf)

RequiredScanned copy of Class A License/Experience (.pdf)

RequiredScanned copy of GST Registration (.pdf)

RequiredScanned copy of insurance coverage of work men (.pdf)

RequiredScanned copy of solvency/turnover certificate (.pdf)

RequiredScanned copy of work experience (.pdf)

RequiredScanned copy of Sketch (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹5,900

EMD Fee Amount

₹31,800

Important Dates

Last Activity

6 Oct 2026

Published

7 Sept 2026

Bid Opening

26 Sept 2026

Download Starts

7 Sept 2026

Download Ends

22 Sept 2026

Submission Starts

7 Sept 2026

Clarification Period

7 Sept 2026 - 11 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (14 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1LABOUR
1.01	(C-202324-4580-1) Doing horizontal directional drilling along across roads, suppling and pulling 125 mm HDPE pipe duct for drawing 3x300 Sqmm Aluminium XLPE UG Cable through the duct including serveying the site for other utilities cable/pipes including making test pits	780	m	1,500	₹11,70,000
1.02	(C-20232 4-4108-3 2) Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.l. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60cm long and fixing the same in ground as required	40	No	529.08	₹21,163.2
1.03	(931) Doing straight joint on HT XLPE UG cables of sizes beyond 3x185 sqmm and upto and including 3x300 sq mm using the cable jointing kit supplied departmentally as per specification after providing proper traffic signalling and caution board fencing etc. wherever necessary, including charges for cable jointer and other sundries etc. as per the direction of departmental officers at site.	3	No	3,229.41	₹9,688.23
1.04	(167) Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.	2	No	2,795.55	₹5,591.1
1.05	(171) Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials.	8	No	564.55	₹4,516.4
1.06	(363) Drilling hole of various sizes on existing Channel/Cross Arm.	18	No	16.73	₹301.14
1.07	(119) Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil.	4	No	1,373.73	₹5,494.92
1.08	(116) Fitting and erecting one HT Double Pole Structure using PSC pole in position including fitting 2 channel cross arms, digging and back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing).	2	No	8,735.82	₹17,471.64
1.09	(702) Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).	4	No	762.14	₹3,048.56

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.47 MB

Work Item Documents

Retenderdocs.pdf

Tender Documents • 0.52 MB

BOQ_1470277.xls

BOQ • 0.28 MB

SketchVellapil.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

ACHUTHAN PILLAI G

Accepted-Technical

Ashir

Accepted-Technical

HASIF T

Accepted-Technical

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1LABOUR
1.01	(C-202324-4580-1) Doing horizontal directional drilling along across roads, suppling and pulling 125 mm HDPE pipe duct for drawing 3x300 Sqmm Aluminium XLPE UG Cable through the duct including serveying the site for other utilities cable/pipes including making test pits	780	m	1,500	₹11,70,000
1.02	(C-20232 4-4108-3 2) Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.l. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60cm long and fixing the same in ground as required	40	No	529.08	₹21,163.2
1.03	(931) Doing straight joint on HT XLPE UG cables of sizes beyond 3x185 sqmm and upto and including 3x300 sq mm using the cable jointing kit supplied departmentally as per specification after providing proper traffic signalling and caution board fencing etc. wherever necessary, including charges for cable jointer and other sundries etc. as per the direction of departmental officers at site.	3	No	3,229.41	₹9,688.23
1.04	(167) Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.	2	No	2,795.55	₹5,591.1
1.05	(171) Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials.	8	No	564.55	₹4,516.4
1.06	(363) Drilling hole of various sizes on existing Channel/Cross Arm.	18	No	16.73	₹301.14
1.07	(119) Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil.	4	No	1,373.73	₹5,494.92
1.08	(116) Fitting and erecting one HT Double Pole Structure using PSC pole in position including fitting 2 channel cross arms, digging and back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing).	2	No	8,735.82	₹17,471.64
1.09	(702) Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).	4	No	762.14	₹3,048.56

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1LABOUR

1.01

(C-202324-4580-1) Doing horizontal directional drilling along across roads, suppling and pulling 125 mm HDPE pipe duct for drawing 3x300 Sqmm Aluminium XLPE UG Cable through the duct including serveying the site for other utilities cable/pipes including making test pits

780

1,500

₹11,70,000

1.02

(C-20232 4-4108-3 2) Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.l. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60cm long and fixing the same in ground as required

529.08

₹21,163.2

1.03

(931) Doing straight joint on HT XLPE UG cables of sizes beyond 3x185 sqmm and upto and including 3x300 sq mm using the cable jointing kit supplied departmentally as per specification after providing proper traffic signalling and caution board fencing etc. wherever necessary, including charges for cable jointer and other sundries etc. as per the direction of departmental officers at site.

3,229.41

₹9,688.23

1.04

(167) Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.

2,795.55

₹5,591.1

1.05

(171) Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials.

564.55

₹4,516.4

1.06

(363) Drilling hole of various sizes on existing Channel/Cross Arm.

16.73

₹301.14

1.07

(119) Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil.

1,373.73

₹5,494.92

1.08

(116) Fitting and erecting one HT Double Pole Structure using PSC pole in position including fitting 2 channel cross arms, digging and back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing).

8,735.82

₹17,471.64

1.09

(702) Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).

762.14

₹3,048.56