Construction work of 02 class room of GHSS Suryanagar Rudrapur

Amount

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms , lifts up to 1.5 m , including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. excavation in all kind of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand).

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)

Providing and laying in position reinforced cement concrete of specified grade excluding the cost of centering shuttering, finishing and reinforcement- all works up to plinth level-in 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominial size)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Reinforcement for RCC work including straightening, cutting, bending,placing in position and binding all complete. In Thermo Mechanicallt Treated bars.

Centering and shuttering including strutting, ropping etc and removal of form for foundations, footing, bases of columns,etc for mass concrete.

Centering and shuttering including strutting , ropping etc and removal of form for suspended floors, roofs, landing, balconies and access platform.

Centering and shuttering including strutting, ropping etc and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, ropping etc and removal of form for columns, pillars, piers, abutments, posts and struts.

12 mm cement plaster of mix 1:6 ( 1 cement :6 fine sand)

15 mm cement plaster on rough side of single or half brick wall of mix 1:6 ( 1 cement :6 fine sand)

Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand:4 graded stone aggregate finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominial size stone aggregate.

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick.

Cement plaster skirting ( up to 30 cm height) with cement mortar 1:3 ( 1 cement :3 coarse sand) finished with a floating coat of neat cement. 18 mm thick

Providing and fixing M.S. Tubular frames for doors, windows,ventilators and cupboard with L-Type section made of 1.60mm thick M.S. Sheet, joints mitred and welded and grinded finish profiles required size with 15x3mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primers.

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required.

Providing and fixing ISI marked flush door shutters confirming to IS;2202 (part i) non decorative type , core of block board construction with frame of ist class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked stainless steel butt hinges with necessary screws.

Providing and fixing of alluminium handle ISI marked anodised( anodic coating not less than grade AC 10 as per is :1868 ) tranparent or dyed to required colour or shade with necessary screws complete: 125 mm

Providing and fixing of alluminium Tower bolt ISI marked anodised( anodic coating not less than grade AC 10 as per is :1868 ) tranparent or dyed to required colour or shade with necessary screws complete: 200x10 mm

Providing and fixing of alluminium Tower bolt ISI marked anodised( anodic coating not less than grade AC 10 as per is :1868 ) tranparent or dyed to required colour or shade with necessary screws complete: 150x10 mm

Providing and fixing of alluminium sliding door bolt ISI marked anodised( anodic coating not less than grade AC 10 as per is :1868 ) tranparent or dyed to required colour or shade with necessary screws complete: 250x16 mm

Providing and fixing of alluminium hanging floor door stopper ISI marked anodised( anodic coating not less than grade AC 10 as per is :1868 ) tranparent or dyed to required colour or shade with necessary screws complete: Twin rubber stopper.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4 mm thick glass panes

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete : 100x75x3.50 mm

Finishing wall with acrylic smooth exterior paint of required shade New work (Two or more coat applied @1.67 ltr/10 sqm. Over and including base coat of water proofing cement paint applied @ 2.2 kg /10 sqm ).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work.

Brick edging 7cm wide 11.4cm. deep to plinth protection with bricks of class designation 75 including grouting with cement mortar 1:4 (1 cement : 4 fine sand)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth

KRISHNA ASSOCIATES

CHAWLA CONSTRUCTION

GOLD ENTERPRISES