Development of Road at Chharwada Asopalav in Ward No. 5 At Vapi Municipal Corporation.

Name of Work : Development of Road at Chharwada Asopalav in Ward No. 5 At Vapi Municipal Corporation.

Memorandum showing Items of Woks to be carried out

Item Quantities Item of Works Tendered Rates. Unit Total Amount According

Item Quantities Item of Works Tendered Rates. Unit Total Amount According

No. Estimated But In Figures In Words to estimated Quantity.

1 may be2 More 3 4 5 6

1 8185.51 Box cutting the road surface to proper slope and camber for making a base for ₹ 207.40 Rupees Two Hundred CuM ₹

road work including removing the excavated stuff and depositing on the road side Seven Paise Fourty Only

slope as directed upto 50Mt.lead.

2 3096.10 Construction of Granular Sub Base by Providing Coarse Graded Machine crushed ₹ 809.09 Rupees Eight Hundred CuM ₹

B.T. Material Satisfying MORTH Specification of Grading II ( B.T. Stone Agreegate Nine Paise Nine Only

53 mm to 2.36 mm Below - 20% ) Including spreading in unifrom layer with motor

grade on prepared surface, mixing by mix in place method with rotovator at OMC

an COmpacting with Vibratory Roller to Achieve the desired density etc. complete.

3 974.05 Providing and laying cement concrete 1:4:8 (1-Cement : 4- coarse sand : 8- hand ₹ 2,680.21 Rupees Two Thousand CuM ₹

broken stone aggregates 40 mm nominal size) and curing complete excluding cost Six Hundred Eighty Paise

of formwork in (A) Foundation and Plinth. TwentyOne Only

4 1174.80 Providing formwork of ordinary timber planking so as to give a rough finish ₹ 171.80 Rupees One Hundred SqM ₹

including centering shuttering strutting and propping etc. Height of propping and SeventyOne Paise Eighty

centering below supporting floor to ceiling not exceeding 4 M. and removal of the Only

same for in situ reinforced concrete and plain concrete work in. (A) Foundations

Footings Bases of Columns etc. and Mass concrete.

5 2435.13 Providing and laying in position Ready Mixed M-300 grade concrete for reinforced ₹ 5,080.15 Rupees Five Thousand CuM ₹

cement conctere work , using cement content as per approved Design Mix Eighty Paise Fifteen

manufactured in fully automatic batching plant and transported to site of work in Only

transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete

work including pumping of R.M.C. from transit mixer to site of laying, excluding

the cost of centering shuttering finishing and reinforcement including cost of

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard

setting of concrete, improve workability without impairing strength and durability

as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained) (Cement level 475 kg )

6 164133.90 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, ₹ 76.21 Rupees SeventySix Paise Kg ₹

binding and placing in position complete upto floor two level TwentyOne Only

7 7323.00 Providing and Supplying of Premoulded Bituminous Joint Filler 25 mm Size in ₹ 65.50 Rupees SixtyFive Paise Rmt ₹

Grooves as Per Directed by EIC or Architect. Fifty Only

8 9740.50 Providing and Erection of Tri-Mix Treatment on Concrete Surface Using Concrete ₹ 163.01 Rupees One Hundred SqM ₹

Polishing Machine and Vaccum Dewatering Machine along with its instruments, SixtyThree Paise One

accessories, lead, transport, electricity, etc. all Only

9.1 75.00 RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at site ₹ 1,289.15 Rupees One Thousand Each ₹

of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per Two Hundred EightyNine

type design & Drawing including cost of reinforcement M.S. Angles or Flat, curing Paise Fifteen Only

mold work etc.Heavy Duty with Holes to Pass water in Frame suitable for 50cm

opening of MH ( @ 15% L.C. )

9.2 75.00 RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at site ₹ 1,348.95 Rupees One Thousand Each ₹

of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per Three Hundred

type design & Drawing including cost of reinforcement M.S. Angles or Flat, curing FourtyEight Paise

mold work etc.Heavy Duty with Holes to Pass water in Cover suitable for 50cm NinetyFive Only

opening of MH ( @ 15% L.C. )

10 100.00 Renovation of Manhole by Increasing the height at top including cost of excavation, ₹ 686.90 Rupees Six Hundred Nos ₹

refitting of Manhole Frame and Cover curing etc. complete including all carting and EightySix Paise Ninety

providing of materials which is required for the purpose. ( Except Manhole Frame Only

and Cover ) for All type manhole by providing RCC 1:2:4 Partition Walls with

Required Reinforcement 25 cm thick and circular oprning with 500 mm clear dia

and 0.40 mt average height.

11 1461.09 Providing, laying, spreading and compacting graded stone aggregate to wet mix ₹ 828.67 Rupees Eight Hundred CuM ₹

macadam of 150 mm thickness specification including premixing the Material with TwentyEight Paise

water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, SixtySeven Only

laying in uniform layers with paver in sub- base / base course on well prepared

surface with Plant Mix Method and compacting with vibratory roller to achieve the

desired density.

12 50.00 Constructing brick masonry chamber for underground C.I. Inspection chamber and ₹ 2,932.93 Rupees Two Thousand Each ₹

bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. Nine Hundred ThirtyTwo

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of Paise NinetyThree Only

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm

deep for single pipe line.

13 75.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- ₹ 91.84 Rupees NinetyOne Paise Rmt ₹

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall EightyFour Only

be fixed on the wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

14 50.00 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- ₹ 148.12 Rupees One Hundred Rmt ₹

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall FourtyEight Paise

be fixed on the wall with the help of clamp at every two metre C/C or shall be Twelve Only

concealed as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

15 50.00 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- ₹ 195.67 Rupees One Hundred Rmt ₹

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall NinetyFive Paise

be fixed on the wall with the help of clamp at every two metre C/C or shall be SixtySeven Only

concealed as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

16 50.00 Providing and supplying in standard length ISI mark rigid unplasticised PVC pipes ₹ 368.00 Rupees Three Hundred Rmt ₹

suitable for potable water with ring fit joint including cost of rings, as per IS SixtyEight Only

specification no. 4985/1988 including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to the

departmental stores and including cost of jointing meterial etc. complete. Test

Pressure 10 Kg/cm2 (4) 110 mm

17 50.00 Providing and supplying in standard length ISI mark rigid unplasticised PVC pipes ₹ 772.80 Rupees Seven Hundred Rmt ₹

suitable for potable water with ring fit joint including cost of rings, as per IS SeventyTwo Paise Eighty

specification no. 4985/1988 including all local and central taxes, transportation, Only

freight charges, octroi, inspection charges, loading, unloading, conveyance to the

departmental stores and including cost of jointing meterial etc. complete. Test

Pressure 10 Kg/cm2 (7) 160 mm

18 50.00 Lowering, Laying, Fixing and Jointing PVC / UPVC / CPVC pipes and Special of ₹ 21.85 Rupees TwentyOne Paise Rmt ₹

Following class and Diameter including the cost of conveyance from stores to site EightyFive Only

of works including cost of labour, material, cement solvent, giving satisfactory

hydraulic testing as per IS Code. (4) 110 mm Dia

19 50.00 Lowering, Laying, Fixing and Jointing PVC / UPVC / CPVC pipes and Special of ₹ 32.20 Rupees ThirtyTwo Paise Rmt ₹

Following class and Diameter including the cost of conveyance from stores to site Twenty Only

of works including cost of labour, material, cement solvent, giving satisfactory

hydraulic testing as per IS Code. (7) 160 mm Dia

20 454.50 Road marking with hot applied thermoplastic paints with reflectorising glass beads ₹ 367.72 Rupees Three Hundred SqM ₹

on bitumin surface providing and laying a hot applied thermoplastic compound 2.5 SixtySeven Paise

mm thick includingreflectorising glass beads @ 250gms per sqm area, thickness of SeventyTwo Only

2.5mm is excluding of surface applied glass beds as per IRC:35-2015. The finished

surface to be level, uniform and free from streaks and holes. zebra patta /bump

patta lane/center line/ edge line/cut patta. The white color marking should

provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux and

Asphalt road shall be min 100 mcd/m2/lux during the service life during the day

time. The marking should meet the performance criteria for night time

reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of

IRC 35-2015. Warranty for the Retro reflectivity should be two years.

21 459.00 Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks Raised Pavement ₹ 326.23 Rupees Three Hundred Nos ₹

Markers made of polycarbonate and ABS moulded body and reflective panels with TwentySix Paise

micro prismatic lens capable of providing total internal reflection of the light TwentyThree Only

entering the lens face and shall support a load of 13635 kgs. tested in accordance

to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH

Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and

length shall not exceed 20 mm, 130 mm and 130 mm and with minimum reflective

area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree.

The strength of detachment of the integrated cylindrical shanks, (of diameter not

less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be

a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the

shanks to go inside, without nails and using epoxy resin based adhesive as per

manufacturers recommendation and The color of the marker should be as per the

IRC 35-2015 and as directed by Engineer-in-charge.

22 42.00 Solar Stud : ₹ 2,088.68 Rupees Two Thousand Nos ₹

Solar Stud: Supplying of Solar Raised Pavement Markers made of polycarbonate EightyEight Paise

molded body with circular shape, solar powered, LED self illumination in active SixtyEight Only

mode, 360 degree illumination and reflective panels with micro prismatic lens

capable of providing total internal reflection of the light entering the lens face in

passive mode. The marker shall support a load of 20000 kg tested in accordance to

ASTM D 4280. The marker should be resistant to dust and water ingress according

to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C.

Color of lighting could be provided in red or yellow (amber) as per requirement and

typical frequency of blinking is 1 Hz. There should be current losses of less than

micro-amperes at 2.4 V in sleep-charging mode to enhance the life of the marker

and a full charge should provide for a minimum autonomy of 50 hours. The height,

width and length of the marker shall not be less than 10 mm x 100 mm x 100 mm.

Also, the surface diameter of the marker shall not be less than 100 mm

respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will

be by drilling holes on the road for the shanks to go inside, without nails and using

epoxy resin based adhesive as per manufacturers recommendation and complete as

directed by the engineer

23 4.00 Direction (Junction) Sign :-Providing and fixing sign boards made out of 2mm ₹ 26,572.09 Rupees TwentySix Nos ₹

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 244x122 cms. Thousand Five Hundred

rectangular as per design of IRC-67-2012. Pre treated with phospheting process & SeventyTwo Paise Nine

acid etching; coated with one coat of epoxy primer and two coats of best quality Only

epoxy paint ; reflectorised with High Intensity Prismatic Grade retro refiective

sheeting of Type-4 as per ASTM D- 4956 and latest M.O.S.T. Specifications; 4.0mtr

(2 Nos.) long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron angle of 50x50x5mm; painted

with bestquality epoxy coatings in black and white bends. The details of symbol for

each board shall be as per the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc. complete under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report from third party test lab for

the product offered shall be submitted by contractor. (B) Class-C Type-11 Retro

Reflective sheeting

24 4.00 Cautionary Warning Sign :-Providing and fixing sign boards made out of 2mm ₹ 5,077.27 Rupees Five Thousand Nos ₹

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. SeventySeven Paise

equilateral triangle as per design of IRC-67-2012. Pre treated with phospheting TwentySeven Only

process & acid etching; coated with one coat of epoxy primer and two coats of

best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.

Specifications; 3.6mtr longstand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in black and white bends. The details of

symbol foreach board shall be as per theinstruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc. complete under the supervision of engineer in

charge. A warranty for 10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test report from third

party test lab for the product offered shall be submitted by contractor. (A) Class-C

Type-11 Retro Reflective sheeting

25 20.00 Hazard Marker Sign :-Providing and fixing sign boards made out of 2.0 mm ₹ 3,666.30 Rupees Three Thousand Nos ₹

aluminium sheet / 4 mm ACP (Aluminum composite Panel); size 90x30 cms. Six Hundred SixtySix

rectangular as per design of IRC-67-2012. Pre treated with phospheting process & Paise Thirty Only

acid etching; coated with one coat of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of

Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 1.8mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of symbol foreach board shall be as

per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.

complete under the supervision of engineer in charge. A warranty for 10 years for

the Retro reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the product offered

shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

26 4.00 Village Name Sign :-Providing and fixing sign boards made out of 2mm aluminium ₹ 6,313.51 Rupees Six Thousand Nos ₹

sheet / 4mm ACP (Aluminum composite Panel); size 90x60 cms. rectangular as per Three Hundred Thirteen

design of IRC-67-2012. Pre treated with phospheting process & acid etching; Paise FiftyOne Only

coated with one coat of epoxy primer and two coats of best quality epoxy paint ;

reflectorised with Micro Prismatic Grade retro refiective sheeting of Type-11 as per

ASTM D-4956 and latest M.O.S.T. Specifications; 3.3mtr long stand post of 75 x

x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and

white bends. The details of symbol or inscription/letters / umerals for each board

shall be as per the instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg. including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for 10 years

for the Retro eflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the product offered

shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

27 4.00 Informatory Signs:- Providing and fixing Informatory Signs made out of 2mm ₹ 5,906.48 Rupees Five Thousand Nos ₹

aluminium sheet, size 80 x 60 cms rectangle, as per the design of IRC-67-2012. Pre Nine Hundred Six Paise

treated with phospheting process and acid etching coated with one coat of epoxy FourtyEight Only

primer and two coat of best quality epoxy paint, refloctrorized with retro

reflective sheeting as per the latest M.O.S.T. specification, 3.1 Mt. long stand post

and frame fabricated from suitable size iron angle of 35 x 35 x 3 mm, 75 x 75 x

mm as required painted with best quality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 cms for

each leg, including excavation curing etc. complete under the supervision of

Engineer-In-Charge (B) High Intensity grade.

28 2.00 Regulatory / Mandatory Sign :-Providing and fixing sign boards made out of 2mm ₹ 4,618.73 Rupees Four Thousand Nos ₹

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 60 cms Dia Circle as Six Hundred Eighteen

per design of IRC-67-2012. Pre treated with phospheting process & acid etching; Paise SeventyThree Only

coated with one coat of epoxy primer and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type 11 as

per ASTM D- 4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of

75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with best quality epoxy coatings

in black and white bends. The details of symbol foreach board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size

45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product offered shall

be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

29 20.00 Chevron Sign:- Providing and fixing sign boards made out of 1.5mm aluminium ₹ 4,681.35 Rupees Four Thousand Nos ₹

sheet/3 mm ACP (Aluminium composite Panel); size 60 x50 cm as per design of IRC- Six Hundred EightyOne

67-2012. Pre treated with phospheting process & acid etching; coated with one Paise ThirtyFive Only

coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with

Micro Prismatic Grade retro refletivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T. Specifications; 3.3 mtr. long stand post of 75 x 75 x6mm / 65 NB

Circular MS Pipe as required and frame fabricated from suitable size iron angle of

50 x 50 x 5mm; painted with bestquality epoxy coatings in black and white bends.

the deails symbol or inscriptio/ numerals for each board shall be per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blacof size

45 x 45 x 60 Cms. for each leg. Including excavation, curing etc. complete under

the supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeing from originaa manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product offered shall be

submitted by contractor. (A) Class-C Type-11 Retro Reflective Sheeting

30 1.00 Providing and fixing ordinary kilometer stone of precast C.C. 1:2:4 including ₹ 1,293.39 Rupees One Thousand Nos ₹

necessary reinforcement as per I.R.C. type design in C.C. 1:4:8 including painting Two Hundred

and lettering etc. complete. NinetyThree Paise

31 45.73 Supply and Apply Rumbble Strips Road marking with hot applied thermoplastic ₹ 1,772.55 ThirtyNine

One Thousand SqM ₹

paints with reflectorising glass beads on bitumin surface providing and laying a hot Seven Hundred

applied thermoplastic compound 8 mm thick including reflectorising glass beads @ SeventyTwo Paise

250gms per sqm area, thickness of 8mm is excluding of surface applied glass beds FiftyFive Only

as per IRC:35-2015. The finished surface to be level, uniform and free from streaks

32 2593.25 Providing and Fixing Pre Cast Rubber Dye Interlcoking Concrete Blocks 80 mm Thick ₹ 785.76 Rupees Seven Hundred SqM ₹

with Grade M-400 Pneumatic Compressed By Mechanically pressed and as per EightyFive Paise

approved design including 75 mm sand layer for levelling and filling the joint with SeventySix Only

sand in proper line and level etc. complete.

33 1518.00 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete ₹ 517.12 Rupees Five Hundred Rmt ₹

block 30cm length,30cm height and 15cm thick of M250 grade concret as per Seventeen Paise Twelve

approved design and including excavation for fixing in proper line and level,filling Only

the joint with C:M 1:3 (1cement:3fine sand) etc complete.

34 259.33 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand ₹ 3,005.76 Rupees Three Thousand CuM ₹

broken stone aggregates 40 mmnominal size) and curing complete excluding cost of Five Paise SeventySix

formwork in (A) Foundation and Plinth Only

35 379.50 Providing and laying controlled cement concrete M.200 exposed work with curing ₹ 10,762.65 Rupees Ten Thousand CuM ₹

etc. complete including the cost of formwork but excluding the cost of Seven Hundred SixtyTwo

reinforcement for R.C.C. work in(A) WALLS :(i) Having cross-sectional area 0.05 to Paise SixtyFive Only

36 2049.30 Finishing wall with weather proof exterior emulsion paint on wall surface (two ₹ 114.53 Rupees One Hundred SqM ₹

coats) to give an required shape even shade after thoroughly rushing the surface Fourteen Paise

to remove all dirt, and remains of loose powdered materials.etc complete FiftyThree Only

TOTAL Rs. (Round Off) ₹

Rupees Four Crore FourtyFour Lakh TwentyNine Thousand Seven Hundred SeventyFour Only

I/ We am /are willing to carry out the work at ………….....………% above/below percent

above /below percent ( should be written in figures and words) of the estimated rates mentioned above.

Amount of tender works out as under.

*Estimate amount *Estimate amount

Put to tender Rs. Put to tender Rs. …

Deduct : % below / % Above Rs Add / Deduct :..: ……………..% above Rs………

Net. Total Rs………………..

In Words Rs. In Words………………………………………………

*( Please strike out whichever is not applicable)

Note-1:- All works shall be carried out as per Public Works Department, Hand Book & other specifications of Division or as directed.

Note-2:- All the columns in Schedule should be filled in digitally & the total of the entries in the last column should be struck by the contractor under his digitally

Note-3:- Rates quoted include clearance of the site (Prior commencement of work & at its close) in all respects & hold good for work under all conditions, site.

Note-4 The payment shall be made after availability fund. The contractor has no any claim in this regard.

Note-5 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

Note-6 The labour cess will be deducted as per prevailing rules i.e.1% of the work done.

Note-7 GST and Income tax TDS will be deducted at a source while making payments of bills

Note-8 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.:PRC-10/2017 Cement Consumption/16/ C Date : 11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Note-9 The rates to be quoted by the contractor must be inclusive of all duties, taxes, and other levies Except GST payable by the contractor under the contract or for any other cause shall be

included in the rates, prices and total Bid Price submitted by the Bidder

Signature of Bidder. Vapi Municipal Corporation