SPECIAL REPAIR TO HARDSTANDING A B C AND D CHARGE AND TWO ANIMAL SHED AT RTS AND DEPOT HEMPUR UNDER GE EAST BAREILLY

Amount

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling & mass concrete complete all as specified and as directed.

M&L for 100 mm thick cement concrete (1:1.5:3) ( using 20 mm graded crushed stone aggregate) as in flooring with 20 mm thick wearproof topping as specified incorporating an approved metallic floor hardener 10% & finished the surface even and smooth without using extra cement ( except metallic floor hardener) with spike rolling to surface or expanded metal while the concrete is green complete all as specified and directed9 NOTE:- Metallic floor hadener will be measured and Paid seperately)

Supply only Metallic floor hardener complete all as specified and as directed.

M&L forming 12 mm thick Expansion joint filled with pre formed bitumen filler and top 30 mm primed and sealed with sealing compound grade A havinf thickness of slab as 100 mm complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance not exc 50m and making good surface complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundation, filling & mass concrete complete all as specified and as directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed.

M&L for Mild steel in flat, round or square bars, in available lengths conforming to Fe 410-W (Gde-E250) quality-A complete all as specified and as directed

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and as directed specified

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paints over one coat of red oxide primer complete.complete all as specified and as directed specified

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed specified. ( NOTE:- Tenderers may note that amount of credit will be deducted from the total amount arrived at the time of Acceptance of contract.)

RAMAN CONSTRUCTION CO.

M/s Naresh Kalia

raman enterprises

RIYASAT ALI KHAN