Bi-annual Work of Fabrication of 66KV H Frame Structure and accessories for various H Frame line at Soja construction Store,Himatnagar construction Div

Subject: Bi-annual Work of Fabrication of 66KV 'H' Frame Structure and accessories for various 'H' Frame line at

Soja construction Store, Himatnagar construction Div.

Description Total

Fabrication of 66KV 'H' Frame Structure and accessories for various 'H' Frame line

under Soja Construction Store

Sr No Description Qty Unit. Rate Total

Fabrication of Rail Girder 152 × 152 mm or 90 lbs. to 150 lbs. rail

1 for "A" & "B" type structures as per Drawing (for 13 mtr/16 mtr 1500 Nos. 408.00

2 - Do - But for "C" type Structure 20 Nos. 486.00

Channel cross arm drom MS 100 × 50 mm Channel as per

drawing for "A" type Structure

- Do - But from MS 125 × 65 mm Channel as per drawing for "B"

5 - Do - But for "C" type Structure 20 Nos. 128.00

6 Parallel bracing from MS 50 × 50 × 5/6 mm angle as per drawing 1500 Nos. 39.00

7 Cross bracing from MS 50 × 50 × 5/6 mm angle as per drawing 2500 Nos. 39.00

Two/three Hole Patties from 75 × 10 × 50 × 6 mm MS flat as per

9 Four Hole Patties from 75 × 10 mm MS flat as per drawing 1250 Nos. 25.00

10 Five Hole Patties from 75 × 10 mm MS flat as per drawing 1250 Nos. 30.00

Guy/Stay clamp for Girder/Rail as per drawing & instruction of

Engineer In charge

"U" Bolts from 16 mm Dia MS round bar as per drawing &

instruction of Engineer In charge

13 Guy/Stay Set from 16.20 mm MS round & channel as per drawing

a) Anchor Rod 1200 Nos. 76.00

b) Eye Bolt with supply of 2 Nos of nuts with each type bolt by the

c) Turn Buckle 1200 Nos. 76.00

Extension of 105 lbs rails or 152 × 152 mm girder from 9 mtr to

mtr. Length by welding of rail girder piece mtr. To mtr. In length as

per instruction of Engineer- In - charge. The rate should be quoted

14 along with supply of bolts nuts required for the joints & cutting of 20 Nos. 1150.00

rail girder piece from the available lengths. If cutting will be

required in the rail in which the piece is to be jointed no extra

payment will be made.

Electric gas welding joint work for 50 × 50 × 6 mm MS angle as per

instruction of Engineer- In - charge.

Electric gas welding joint work for 100 × 50 mm MS angle as per

instruction of Engineer- In - charge.

Electric gas welding joint work for 125 × 65 mm MS angle as per

instruction of Engineer- In - charge.

Fabrication of Twisted patti made from 50X6 mm /75 × 10 mm MS

flat as per required fabrication

Fabrication of rails/angles etc for mounting of various voltage class

of power transformers. This includes searching, sagrigating, lifting

of raw material from scrap or fresh material as per instruction of

19 EiC and stacking it with after proper fabrication (as per drawing or

as per instruction of EiC) at proper place as per instruction of EiC.

All required tools should be provided by fabricators. Only power

supply will be provided by GETCO at free of cost

(a) For 66 kV Class Transformer ( 1 set per transformer) 24 Set 1258.00

(b) For 132 kV Class Transformer ( 1 set per transformer) 0 Set 1554.00

(c) For 220 kV Class Transformer ( 1 set per transformer) 0 Set 1849.00

(d) For 400 kV Class Transformer ( 1 set per transformer) 0 Set 2219.00

Fabrication of members of s/s structure/ Tower material from

old/scrap material as per inst of EIC.

I/ we am / are willing to carry out the above work at_______________________________________ %

above / below (percentage) should be written in figures and words.

tender amount work out Rs. ______________________________________________Rupees in

Signature of Contractor,

(With Rubber Stamp & Date)