SE(E/M)-I /T-03 of 2023-24 (2nd call)

Amount

Filter Bed Equipment :-

Supply, Delivery, Installation, Testing & Commissioning of Electrical Control Console for Opening / Closing of actuator operated valves with Indicating Lamps, Switch, Internal Electrical wiring, etc. completely suitable for operation of Inlet, Outlet, Wash, Drain & Air Valve with internal wiring for ROF & LOH Indicators and Supply, Delivery, Installation, Testing & Commissioning of Capacitance type Rate of Flow & Loss of Head Indicator complete with all fittings & fixtures suitable for mounting on Filter Control Console complete with necessary pipe fittings & Valves as required and as per direction of EIC.

Clariflocculator:-

Supply, Delivery, Installation, Testing & Commissioning of new Slewing Ring type Central Bearing with Cast Iron Body Forged Carbon Steel Racer, 38 mm dia Steel Ball, Nos. Grouting Bolt & Nut etc. 810mm Base dia, Grouting PCD 760 mm complete with Base Plate fitted with Socket for Clariflocculator Bridgeas as per specification and direction of EIC .

Supply, Delivery, Installation, Testing & Commissioning of new Clarifier Carriage Drive complete with Idle Shaft, Driving Shaft, Idle Wheel, Driving wheel, Plummer Coupling etc. complete with Motor & Gear Box as per specification and direction of EIC.

Repairing and renovation of Flocculator Driving arrangement including Supply, Delivery, Installation, Testing & Commissioning of new Bevel Gear & Pinion with Slewing Ring type Forged Steel Bearing racer with Crome Steel Ball and Carbon Steel C-45 Pinion with Reduction Gear Box, Coupling and Motor complete as per specification and direction of EIC.

Flash Mixer:-

Supply, Delivery, Installation, Testing & Commissioning of new Flash Mixer unit complete with Turbine type SS 304 Flash Mixing Paddle, Base Frame, Bearing Housing, Motor, Reduction Gear Box Coupling, GM guide bush supporting Channel with all required SS 304 Bolt Nut washers.

Alum Agitator:-

Supply, Delivery, Installation, Testing & Commissioning ofnew SS 304 Agitator for Alum Preparation Tank complete with Base Frame Motor, Reduction Gear Box, Coupling, Bearing Housing, SS 304 Shaft and Impeller, Reduction Gear Box with flexible coupling etc as per specification and direction of EIC .

Repairing and renovation of Rate Of Flow Controller system of the gradual increase in Loss Of Head In the Filter Bed complete with 500 mm dia Double Beat Outlet Control Valve Rate Setter, Orifice. Out Let Control gear fittings, Float Raising Gear, Controller Float and Filter Float

Blower:-

Supply, Delivery, Installation, Testing & Commissioning of new Rotary twin lobe air blower with suitable rating Motor of model no. 1016 AC with Common base Frame,Suction Filter ,Safety Valve ,V-Belts,V-Belt Guard ,Suction Silencer,Discharge Silencer ,NRV,Pressure Gauge with Isolation Valve & Syphon,All Fixing Nuts & Bolts ,Drive And Driven Pulleys,Interconnecting Piping,Set of Foundation Bolts ,Anti-Vibration Pads ,Gasket etc. as per site condition and direction of EIC.

LT Panel:-

Supply, Delivery, Installation, Testing & Commissioning of 415 V, 3 phase 4 wire, 50 HZ, LT PMCC including arrangement of earthing system for Annex Building at Baranagar Kamarhati WTP Ph-1 as per Tender specification and direction of EIC .

Supply, Delivery, Installation, Testing & Commissioning of 415 V, 3 phase 4 wire, 50 HZ, LT PMCC for Chemical House at Baranagar Kamarhati WTP Ph-1 as per Tender specification and direction of EIC.

Supply, Delivery, Installation, Testing & Commissioning of 415 V, 3 phase 4 wire, 50 HZ, LT MCC (Outdoor type) for Clarifier at Baranagar Kamarhati WTP Ph-1 as per Tender specification and direction of EIC .

Supply, Delivery, Installation, Testing & Commissioning of 415 V, 3 phase 4 wire, 50 HZ, LT PMCC for Supernatant Pump at Baranagar Kamarhati WTP Ph-1 as per Tender specification and direction of EIC .

Supply, Delivery, Installation, Testing & Commissioning of 415 V, 3 phase 4 wire, 50 HZ, LT Control Desk for Baranagar Kamarhati WTP Ph-1 as per Tender specification and direction of EIC.

Supply, Delivery, Installation, Testing & Commissioning of 415 V, 3 phase 4 wire, 50 HZ, LT MCC (Wall Mounted) for Sludge Panel at Baranagar Kamarhati WTP Ph-1 as per Tender specification and direction of EIC .

N.B.- All panel work are inclusive of arrangement of earthing system with supply of required materials.

Supply, Delivery, Installation, Testing & Commissioning of 415 V, 3 phase 4 wire, 50 HZ, LT PDB for Valve Actuator at Baranagar Kamarhati Filtre bed area as per Tender specification and direction of EIC.

Valve:-

Supply, Delivery, Installation, Testing & Commissioning of DI Double Flanged Swing Check Type Non Return Valve as per IS Flanged drilled as per IS: 1538 as per site condition and direction of EIC

a) Back wash Pump delivery -Dia 300 mm

b)Recirculation Pump delivery Dia 200 mm

c) Sludge Pump Delivery Dia 200 mm

d) Supernatant Pump delivery main dia 150 mm

Supply, Delivery, Installation, Testing & Commissioning of DI Double Flanged Non Rising Spindle manually operated Sluice Valve as per IS Flanged drilled as per IS: 1538 as per site condition and direction of EIC

a) Back wash Pump suction & delivery -Dia 300 mm

b)Recirculation Pumpsuction & delivery Dia 200 mm

c) Sludge Pump suction & deliveryDia 200 mm

d) Supernatant Pump individual delivery dia 150 mm

e) Desludging valve of Clarifier dia 250 mm

Supply, Delivery, Installation, Testing & Commissioning of Electrical actuator operated Cast Iron Rising Spindle single faced flange mounted sluice gate IS: 3042 as per site condition and direction of EIC. Diameter 600 mm

Supply, Delivery, Installation, Testing & Commissioning of DI Double flange Outside Screw Rising type Electrical actuator Operated Sluice valve As per IS: face to face dimension as per PD series(Short type), Flanged drilled as per IS: 1538 as per site condition and direction of EIC

a) Dia 500 mm

b) Dia 150 mm

c) Dia 250 mm

Pump-Motor set:-

Supply, Delivery, Installation, Testing & Commissioning of Pump-motor set comprising of HSC pump of head 9 mtr and discharge 324 m3/hr (Make: Mather & Platt or equivalent) along with base frame, coupling, coupling guard and companion flange etc. as required and 415V, 50 Hz, 1460 rpm, 28 A, S1 duty, 3-phase induction motor of 15 KW for recirculation purpose.

Supply, Delivery, Installation, Testing & Commissioning of Pump-motor set comprising of end suction HSC pump of head 12.3 mtr and discharge 840 m3/hr (Make: Mather & Platt or equivalent) along with base frame, coupling, coupling guard and companion flange etc. as required and 415V, 50 Hz, 985 rpm, 78 A, S1 duty, 3-phase induction motor of 45 KW for backwash purpose.

Supply, Delivery, Installation, Testing & Commissioning of Pump-motor set comprising of end suction HSC pump of head 18.20 mtr and discharge 198 m3/hr (Make: Mather & Platt, Model: 6/5 SK or equivalent ), along with base frame, coupling, coupling guard and companion flange etc. as required and 415V, 50 Hz, 980 rpm, 53 A, S1 duty, 3-phase induction motor of 45 KW for sludge disposal.

Hoisting Equipment:-

For Chlorine toner

Supply,Delivery, Erection, Testing & Commissioning of 3 Ton x 3.5 Metre Lift Chain Pulley Block with Geared Trolley “INDEF” make suitable for existing Monorail.

For Alum Room

Supply, Delivery,Erection, Testing & Commissioning of 3 Ton x 15 Metre Lift Electric Wire Rope Hoist with Electric Trolley along with power feeding arrangement by festoon cable with 'T' track and 4 wheeler cable trolley for travel length of 28m (approx.) for existing Monorail .

For recirculation and Backwash Pump Pit

Supply, Delivery,Erection, Testing & Commissioning of 3 Ton x 6.5 Metre Lift Chain Pulley Block with Geared Trolley “INDEF” make suitable for existing Monorail.

Supply, Delivery,Erection, Testing & Commissioning of 3 Ton x 5.5 Metre Lift Chain Pulley Block with Geared Trolley “INDEF” make suitable for existing Monorail.

For Sludge pump house and lagoon

Supply, Delivery,Erection, Testing & Commissioning of 5 Ton x 15 Metre Lift Chain Pulley Block with Geared Trolley “INDEF” make suitable for existing Monorail.

Supply, Delivery,Erection, Testing & Commissioning of 3 Ton x 10 Metre Lift Chain Pulley Block with Geared Trolley “INDEF” make suitable for existing Monorail.

Pre and Post chlorination Pump-Motor set

Supply,Delivery of Pump Motor set including Base Frame of Capacity 12 m3/hr, 60 m head and motor rating 7.5 KW having model no. DB-32/20 including Transporting, loading and unloading cost.

Supply,Delivery of Pump Motor set including Base Frame of Capacity 18 m3/hr, 60 m head and motor rating 7.5 KW having model no. DB-40/20 including Transporting, loading and unloading cost.

Installation, testing & commissioning of pump-motor sets including modified concrete casting as required as per direction of EIC.

Dismantling,Withdrawing,lifting of existing Pump motor sets with arrangement of try-pot and others tools and tackles after disconnecting the LT power line.

Supply,fitting,fixing of the following items to suction and delivery pipelines of the pumps.

40 mm G.M Non return Valve

40 mm G.M Gate Valve

50 mm G.M check valve

40 mm GI pipe (Bend,T/SP/socket etc.)

40/32 mm reducer

50 mm G.I bend

50 mm UPVC pipe (bend/T/Socket etc.)

50 mm G.M Gate valve

50 mm G.M Non return Valve

50 mm GI pipe (Bend,T/SP/socket etc.)

65 mm G.M check valve

65 mm G.I bend

65 mm UPVC pipe (bend/T/Socket etc.)

Flowmeter:-

Supply, Delivery,Erection, Testing & Commissioning of open channel flow meter/totalizer with transmitter, illuminated display, IP 68 protection and cable length of 100 m (Make: Endress+ Hauser, Model: FDU90-RN8AA or equivalent with 100m cable FMU90-R21CA111AA3A)

Alum tank filling pump:-

Supply, Delivery, Installation, Testing & Commissioning of End suction horizontal pump having discharge 15 m3/hr and head 20 m (Make: Wilo Mather and Platt, model: PISO 40-250) with 2.2 KW/4P motor along with base frame, coupling, coupling guard and companion flange etc. as required and as per direction of EIC.

65 mm G.M check valve

65 mm G.I bend

65 mm UPVC pipe (bend/T/Socket etc.)

40 mm G.M Non return Valve

40 mm G.M Gate Valve

40 mm GI pipe (Bend,T/SP/socket etc.)

Supernatant Pump:-

Supply, Delivery, Installation, Testing & Commissioning of Submersible type pump motor set, discharge 150 m3/hr head 16.5 mtr, 16 KW/4P Motor (Make: KSB Model: KRTK 150-315/164 UG1-P or equivalent).

Dismantling charges of all the existing electro-mechanical equipmet like pump, motor, valve, cable pipeline , panel, control console etc. for installation of the new equipment, including painting of whole installation as required and as per direction of EIC

Supply, delivery, installtion , cable termination and storage of L.T power cable and cotrol cable as per specification, as per rquirement of site and direction of EIC.

1.1 KV grade XLPE insulated armoured LT power cable

3.5C X 240 Sq. AL.

3.5C x 95 Sq. AL.

3C x 50 Sq. AL.

3C x 25 Sq. AL.

3C x 16 Sq. AL.

3C x 6 Sq. AL.

1.1 KV grade XLPE insulated armoured LT control cable

4C X 2.5 Sq.Cu.

5C X 1.5 Sq.Cu.

7C X 1.5 Sq.Cu.

10C x 1.5 Sq.Cu.

0.6 KV grade XLPE insulated armoured screen cable

3C X 1.5 Sq.Cu.

Supply, delivery, storage, installtion and commissioning of L.T power cable and cotrol cable, screen cable jointing material (dry type) and as per specification, requirement of site and direction of EIC

Supply. Delivery,storage, installtion and commissioning at site of MS structural material for cable tray/ rack, panel installtion supports, pipes and valves supports, fabricated stairs and all other fabrication work as per specification, requirement of site and direction of EIC

VA Tech Wabag Limited