Loading
Loading…
Loading…
Tender Value
₹8.5 L
EMD Value
₹16,960
Closing Date
25 Aug 2026, 4:00 pmDue today
Executive Engineer PHE Division Kargil
Executive Engineer PHE Division Kargil
Providing /drilling of 125mm dia Bore well along with umping unit at Astana Youkma Kharboo (Under Tourism Development Authority).
2026_PWD_19365_1
Short E-tender- 73 of PHE Division Kargil of 2026-27 Dated 14-08-2026
Open Tender
Drilling Works
Percentage
12 days
Youkma Kharboo
Refer to NIT
4 documents required · 4 mandatory
₹170
Payable To Executive Engineer PHE Division Kargil
₹16,960
14 Aug 2026
14 Aug 2026
26 Aug 2026
14 Aug 2026
25 Aug 2026
14 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Drilling of 01 No of 125mm dia borewell in collapsible strata conglomerate, boulders, gravel, pebbles, silt, clay, and rock etc formation whatsoever encountered at site. The job envisages construction of Hand Pump Wells of an avg. depth of 60 Mtrs. below ground Level, or till the sufficient discharge of water is available from the bore hole by way of Drilling of 125mm Bore Holes using 115mm ODX method and exploration of underground potable water by tapping sufficient aquifer zones with simultaneously lowering of 125mm M.S/G.I. plain ended pipe duly chamfered and welded. The job includes all charges on account of cost of drilling/ accessories/tools/ attachments/bits/POL's/ consumable/ labour etc with carriage of all materials upto site of work, including cost of suitable casing pipe (ISI marked steel tubes for water wells of hot types finished seamless (HFC) electric automatic fusion welded (HFC) resistance welded in length of 3Mtr with tolerance of + 10cm beveled casing 125mm dia nominal bore with 4.5mm thickness/shoe of adequate hardness. The job also includes development of drilled bore holes with Air Compressor of suitable capacity to clear the tapped water from all suspended impurities.Casing Pipe Make: TATA, JINDAL, SURYA PRAKASH | |||||
| 1.01 | ODEX depth | 85 | RM | 6,000 | ₹5,10,000 |
| 1.02 | DTH depth | 10 | RM | 1,600 | ₹16,000 |
| 3 | Design, installation, testing and commissioning of dual power
operated ( Solar + Grid) Submersible Pump set pump 03 HP /2.25 KW coupled to 415v, 3-phase asynchronous induction motor, hermetically sealed/ with cables and safety rope etc. Pumping Units (1W+1S) Submersible pump & Motor | 1 | Job | 73,000 | ₹73,000 |
| 4 | Pure copper cable 2.5 sqmm Make : KSB, Crompton, Grundfos, Polycab, ABB, Havels | 110 | RM | 250 | ₹27,500 |
| 5 | Providing & fitting of 40 mm HDPE pipe,
GI nipple 40 mm dia, U clamps etc complete job | 150 | RM | 82 | ₹12,300 |
| 6 | providing & fitting of steel rope safety wire 6 mm dia | 105 | RM | 60 | ₹6,300 |
| 7 | DSITC of MNRE approved make (i.e. ALMM) shock proof, Photo Voltaic mono-crystalline solar panels for 2.25 kW each on mountingsframed and fixtures, PV palnt IEC certified, tier-1,with cables and wiring, safety equipment including, transportation, carriage, headload etc. complete job in all respects | 2.25 | KW | 55,000 | ₹1,23,750 |
| 8 | Providing/ positioning of Solar panel mounting frames and fixtures, MoC hot dip galvanized steel structure MS (6040×2.9mm) etc. for 40 kW plant @ 0.019 kg/w, 25 years life. (Complete job in all respect including iron mongering & excluding cost of concrete) | 42.75 | KG | 200 | ₹8,550 |
| 9 | Designing, supply, installation, testing and commissioning of VFD Hybrid Controller 2.25 KW designed to operate on both AC & DC supply (dual purpose) strictly conforming to relevant ISI/ISO/IEEE/IEC/ASTM standards, compatible for the above pump rating. (1Working + 1 Standby) Complete job in all respects | 1 | Job | 51,682 | ₹51,682 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 21.84 MB
BOQ_45985.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].