Construction of Additional Accommodation for Govt. High School building at Chowkari Tehsil Chachiot Distt. Mandi (H.P) (SH- C/O Two rooms with stair case in Ground floor)

Amount

Excavation in foundations trenches etc in earth work in all kinds of soil , such as pick work, pick jumper work, jumper work , jumper blasting wrok, chiseling wedging out rocks including pumping or bailing out water upto all lifts, stacking the excavated soil not more then three metres clear from the edge of excavation and then returning the stacked soil in 15 cm (fifteen centimetres) layers when required in to plinth side of foundations etcetra consolidating each deposited layer by ramming and watering and then disposing of all surplus exeavated earth including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and laying cement concrete, 1:6:12 (One cement : six Sand : twelve graded crushed stone aggregate , 40mm (Forty milimetres) nominal size ) and curing complete excluding cost of centring and shuttering in foundation and plinth including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing form work with steel plates 3:15mm (three point fifteen milimetres)thick welded with angle iron in frame, 30 x 30 x5 mm (Thirty into thirty into five milimetres) so as to give a fair finish including centring shuttering , strutting and propping etcetra with wooden battens and ballies ,heights of propping and centaring below supporting floor to ceiling in all height and removal of the same for insitu reinforced concrete and plain concrete including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge. work in:-

foundation,footing basis of colums etc.and mass concrete including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Columns pillar, posts and struts, square rectangular or polygonal in plan.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Beams, Cantilever girders and lintels sides and soffits of beams , beams haunchings, cantilevers, bressumers and lintels in any depth /in all heights from floor.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etc. in any thickness. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Stair cases with slopping or stepped soffits excluding landing.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Edges of slabs and breaks in floor and walls in any width.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Random rubble masonary/polygonal rubble masonary (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6: 12 (One cement: Six Sand : Twelve graded crushed stone aggregate 20 mm (Twenty milimetres ) nominal size at plinth level in cement mortar 1:6 (one Cement : six sand ) ncluding carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and laying mechanically mixed and vibrated cement concrete (M-20) , 20mm (twenty milimeter) nominal size ) aggregate and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

foundation,footings bases of columns and the like and mass concrete including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Columns pillar, posts and struts upto all floor level. including mixing and carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Suspended floor roofs,landing and shelves and their support balconies,beams ,girders,bressumers and cantilever upto all floor level including mixing concrete including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto all floor level including mixing concrete including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and laying mechanically mixed and vibrated cement concrete(M-20) 20mm (Twenty milimetres) nominal size in Reinforeced cement concrete chhajjas in all thickness upto all floor level including finishing the exposed surfaces with cement mortar 1 :3 (One cement : three sand ) to give a smooth and even surface, centring/form work and curing complete excluding the cost of reinforcement including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing mild steel /Tor steel reinforcement for R.C.C.work including bending ,binding and placing in position complete upto all floor level (Tor steel) including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Brick work using common burnt clay building bricks in super-stucture above plinth (second class Bricks) in cement Mortar 1:6 ( one: cement six : sand) including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing woodwork in frames of doors ,windows,clerestory,windows and other frames wrought,framed and fixed in position (2 nd class Deodar wood) including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory window including black enamelled iron butt hinges with necessary screws (second class deodar wood )40mm (Forty millimetre) thick. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G.(Eighty five ) with wire of dia metre 0.56 mm (Zero point five six millimetre ) for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screws 40mm thick (Forty Millimetre) thick in second class deodar wood including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shades with bolts and nuts screws etc complete 300 X 16 mm (three hundred into sixteen milimetres including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing aluminum tower bolts(barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

250x10 mm (two hundred fifty into ten milimeter)

150 x 10 mm (one hundred fifty into ten milimeter)

Providing and fixing aluminum handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

125 mm (one hundred twenty five milimeter)

100 mm (one hundred milimeter)

Boulder filling dry hand packed tightly as in under floor including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing M.S grill of required pettern in steel/wooden frames of windows etcetra with M.S Flats , square or round bars with round headed bolts and nuts or by screws plain grill. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Cement concrete flooring 1:2:4 (One Cement : Two Sand : Four graded stone aggregate of 20mm (twenty milimeter) size) laid in one layer and finihsed with a floating coat of neat cement 40mm (forty milimeter) thick.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

15 mm(fifteen milimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises,internal rounded angles,chamfers and /or rounded angles not exceeding 80 mm in girth and finished even and smooth in Cement Mortar 1:6 ( one Cement : six Sand) including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

6 mm (six milimetre)cement plaster to ceiling in Cement Mortar 1:3 ( one Cement three : Sand) including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil.grease.dirt and other foregin matter sand papering and knotting Readymixed paint brushing wood primer pink. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of all dirt dust and other foreign matter, sand papering and stopping with ready mixed paint other than white including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

White washing with lime on undecorated wall surfaces two coat to give and even shade including throughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing under layer for plinth protection of 75mm (seventy five milimetre) thick (Unconsolidated ) bed dry of brick/stone aggregate 40mm (Forty millimetre) well rammed and consolidated and grouted with fine sand including preparing of ground. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing plinth protection 50mm (Fifty millimetre) thick in cement concrete 1:3:6 (One cement Three sand : Six graded stone aggregate of 20mm (Twenty millimetre) size). including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Painting (three coat) with black anticorresive bitumastic paint of approved brand and manufacture on new work to give an even shade (excluding priming coat) including cleaning of all dirt dust and other foreign matter, sand papering and stopping with ready mixed paint including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing 40x3 mm (Forty in to three milimetre) flat iron hold fast 40 cm (forty centimeter) long including fixing to frame with 10 mm (ten milimeter) diametre bolts ,nuts and wooden plugs and embending in cement concrete block 30 x30x15 cm (thirty into thirty into fifteen milimeter) in C.C 1:3:6 (one Cement:three Sand:six crushed graded stone aggregate 20 mm (twenty milimeter) nominal size) including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing glass strips in joints of terrazzo floors , 40mm (forty milimetre)wide and 4mm (four milimetre) thick. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

20 mm (twenty milimetre)cement plaster in two coats backing coat 10 mm (ten milimetre)and finishing coat 10mm(ten milimetre) thick on fair side of brick/stone masonry walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and /or rounded angles not exceeding 80mm (eighty milimeter) in girth and finished even and smooth. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

YADVINDER

RAKESH KUMAR