Tender for Attend the cable fault at site FROM RECIVING the message from CONCERN S/DN AND LOCATING THE FAULT UNDERGROUND CABLE and Rectify the fault (XLPE cable will be supplied by DGVCL) with cable end termination and straight through joints kits (to be supplied by contractor) as per norms under all scheme for the year 2024-2025 for Kadodara-1 ,Kadodara Ind & Palsana Sub division under Kadodara Division.

(Name of Work:- ARC work of Attend the cable fault at site within 03 HRS FROM RECIVING the message from D.E/JE OF

CONCERN S/DN AND LOCATING THE FAULT UNDERGROUND CABLE

Sr. Item Code Total

Description Unit Rate Amount

Labour charge for excavation of cable trench of 400mm width Meter

x 1200mm depth, in any type of soil for laying of cable of size

up to 240 mm2 (For additional cable 200 mm additional width

shall be considered i.e. half trench length is to be considered

Labour charge for excavation of cable trench of 600mm width Meter

x 1200mm depth, in any type of soil for laying of cable of size

up to 240 mm2 (For additional cable 200 mm additional width

shall be considered i.e. half trench length is to be considered

Labour charge for excavation of cable trench of 400mm width Meter

x 1500mm depth, in any type of soil for laying of cable of size

up to 240 mm2 (For additional cable 200 mm additional width

shall be considered i.e. half trench leng th is to be considered

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up Meter

to 240 mm2 & preparation of sand layer 100mm thick, in the

cable trench & covering the cable with 150 mm dia (Outer),

thickness 25 mm, 1.0 meter long RCC half round muffs and

providing and fixing of 4inch width yellow colour polyethylene

4 9925000004 tape with printing"CAUTION ELECTRIC CABLE BELOW' at

m depth from ground

surface after laying cable in trench. This will provide indication

that electric cable is passing underground so as to protect

cable from mechanical injuries, refilling the same, as per

Instruction of E gineer in Charge (EIC) .

Providing & fixing concrete stone route marker of 300 mm No

width x 150 mm thick x 650 mm height embedded in earth at

least 300 mm below & 350 mm above ground level

respectively at distance approx. 50 meters along the length of

cable. The RCC concreting (1:2:4)(all necessary materials will

5 9925000009 be in bidder's scope) of route marker is to be carried out

mm width x 150 mm thick x 300 mm below ground level as per

instruction of EIC. The route marker should be with name of

company with approved yellow colour-DGVCL. The distance

from marker to cable and cable depth with feeder name etc.,

marked with arrow sign is to be painted on it. The route

marker is to be fixed at location near to any fixed permanent

location (not necessary to fix exact on top of cable) as per

Labour charge for erecting of 11kV / 22 kV XLPE cable of size perJob

up to 240 mm 2 on DP Structure with fixing of 02 Nos polymer

cleats on top and middle part. Polymer cleats, nut bolts etc.

fixing material to be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class4,Green color, perJob

110mm O.D. 8.5mm thickness H.D.P.E. pipe confirms to IS

4984 and BIS certification on the erected DP structure for the

mechanical protection of cable by inserting the cable inside

7 9925000015 HDPE pipe. The HDPE pipe shall be erected in such a way that

300mm shall be below the ground level and the rest 2700 mm

shall be supported on the DP Structure with 01 No Polymer

cleat. All materials including polymer cleat and Nut bolt to be

provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia No

class-B GI pipe with pit to be filled with salt & coke and

construction of chamber as per DGVCL Drg. No. dg /100 for DP

and cable. The earthing pit should be joined with cable by G.I.

strip of size 1" width & 2 mm thick. All material GI pipe, Coke

Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor) No

9 9925000017 for up to 11kV 3C x 185 mm2 size XLPE cable as per DGVCL

technical s ecification

Supply & fixing of heat & shrinkable end terminations No

10 9925000018 (outdoor) for up to 22 kV 3C x 185 mm 2 size XLPE cable

( as per DGVCL technical specification)

Supply & fixing of heat shrinkable type end terminations No

11 9925000019 (indoor) for up to 11kV 3C x 185 mm 2 size XLPE cable as per

DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations (indoor) No

12 9925000020 for up to 22 kV 3C x 185 mm 2 size XLPE cable as per DGVCL

technical specification

Supply & fixing of heat shrinkable straight through joint for up No

13 9925000021 to 11kV 3C x 185 mm 2 size XLPE cables as per

DGVCL technical specification.

Supply & fixing of heat shrinkable straight through joint type No

14 9925000022 for up to 22kV 3C x 185 mm 2 size XLPE cable as per DGVCL

technical specification

Labour charge for excavation of 2100mm long x 1200mm wide No

x 1200 mm deep joint pits for installation of 11kV / 22kV

Straight through joints as per instruction of engineerin-charge

& covering the cable with 150 mm dia (Outer), thickness

mm, 1.0 meter long RCC half round muffs & refilling same as

per instruction of EIC .

Testing of cable at various points and commissioning the No

16 9925000025 feeder as per instruction of engineer-in-charge.Test result shall

be submitted by contractor with bill.

Preparation and submission of 6 (six) copies, of complete Set

layout drawings with GIS mapping as per actual cable routing

showing road crossing, HDPE pipe sleeving, jointing locations,

9925000047 Laying of any size of 11/ 22 KV XLPE /PILCCable in readymade per

trench or in open space cable

9925000048 To Attend the cable fault at site within 03 hrs from receiving No

19 the message from D.E of concern S/dn and locating the fault

under ground cable.

TOTAL AMOUNT :-Twenty Seven Lac Only 27,00,000/-

TOTAL AMOUNT :-Twenty Seven Lac Only 27,00,000/-

Ex. Eng. (O&M),

Kadodara Division, DGVCL.