Repairs and Renovation works at Jawahar Navodaya Vidyalaya, Bhadrak, Odisha

GRAND TOTAL 4,33,91,371.45

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer, 5 mm thick water proofing membrane, black

finished reinforced with glass fibre matt consisting of a coat of

bitumen primer for bitumen membrane @ 0.40 litre/sqm by the

same membrane manufactured ofdensity at 25 ° C, 0.87 - 0.89

kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of

membrane shall be laid using butane torch and sealing all joints etc.,

and preparing the surface complete. The vital physical and chemical

parameters of the membrane shall be as under : Joint strength in

longitudinal and transverse direction at 23°C as 350/300 N/5 cm.

Tear strength in longitudinal and transverse direction as 60/80N.

Softening point of membrane not less than 150 ° C. Cold flexibility

shall be upto -2°C when tested in accordance with ASTM, D - 5147.

The laying of membrane shall be got done through the

authorisedapplicator of the manufacturer of membrane : 5 mm thick

B Repair to Toilet

Providing and fixing Ist quality ceramic glazed wall tiles conforming

to IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in

1 8.31 skirting, risers of steps and dados, over 12 mm thick bed of cement Sqm 729.88 1,063.45 7,76,186.63

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including pointing in white cement

mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality

conforming to IS : 15622 of approved make in colours such as

2 11.37 White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement Sqm 273.94 935.60 2,56,300.98

mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement

slurry @ 3.3 kg/sqm including pointing the joints with white cement

and matching pigment etc., complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, including fixing the pipe with

3 clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints complete as

per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.3 25 mm nominal outer dia Pipes Rm 60.00 408.55 24,513.00

18.7.4 32 mm nominal outer dia Pipes Rm 45.00 500.95 22,542.75

18.7.5 40 mm nominal outer dia Pipes Rm 70.00 674.35 47,204.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

4 at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction of

Engineer in Charge. Concealed work, including cutting chases and

making good the walls

18.8.2 20 mm nominal outer dia Pipes Rm 30.00 513.75 15,412.50

18.8.3 25 mm nominal outer dia Pipes Rm 30.00 626.50 18,795.00

Providing and fixing C.P. brass stop cock (concealed) of standard

design and of approved make conforming to IS:8931.

Providing and fixing C.P. brass stop cock (concealed) of standard

design and of approved make conforming to IS:8931.

Providing and fixing C.P. brass long nose bib cock of approved

7 quality conforming to IS standards and weighing not less than 810

8 Providing and fixing brass stop cock of approved quality : No 20.00 327.95 6,559.00

18.16.2 20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) :

10 18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) No 25.00 61.70 1,542.50

of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT grating of approved quality and colour.

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Academic Block

Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR

soil waste ventilating pipes and fittings of the following outside

diameter conforming to ISI No.13592/1992 to walls with

nails,bobbins and wooden plugs or laying in trenches including

12 jointing with supply of approved rubber lubricant by non-heat

application method/as per manufacturer's

specification,testing,earthwork in excavation in all kinds of soil and

refilling of trenches as per specification and direction of Engineer-in-

a OPWD 110mm dia U-PVC SWR Pipe (Supreme/Ashirvad) Rm 280.00 456.90 1,27,932.00

b 110mm dia U-PVC Door Tee No 25.00 322.70 8,067.50

c 110mm dia U-PVC Plain Tee No 12.00 293.60 3,523.20

d 110mm dia U-PVC Door Bend No 12.00 232.00 2,784.00

e 110mm dia U-PVC Plain Band No 12.00 232.00 2,784.00

f 110mm dia U-PVC Plain Shoe Bend No 25.00 407.40 10,185.00

g 110mm dia U-PVC Offset without ear No 15.00 58.20 873.00

h 110mm dia U-PVC Cowl No 25.00 299.20 7,480.00

i 110mm dia U-PVC P-Trap No 25.00 497.30 12,432.50

j 75mm U-PVC SWR Pipes(Supreme/Ashirvad) Rm 33.00 225.10 7,428.30

k 75mm U-PVC Door Bend No 25.00 184.00 4,600.00

Providing and fixing water closet squatting pan (Indian type W.C.

pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level

white P.V.C. flushing cistern, including flush pipe, with manually

13 controlled device (handle lever) conforming to IS : 7231, with all

fittings and fixtures complete, including cutting and making good the

walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

with integral type foot rests

Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

14 sizes respectively with automatic flushing cistern with standard flush

pipe and C.P. brass spreaders with brass unions and G.I clamps

complete, including painting of fittings and brackets, cutting and

making good the walls and floors wherever required :

One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass

pillar taps, 32 mm C.P. brass waste of standard pattern, including

painting of fittings and brackets, cutting and making good the walls

wherever require:

White Vitreous China Wash basin size 630x450 mm with a pair of 15

mm C.P. brass pillar taps

Providing and fixing 600x450 mm beveled edge mirror of superior

glass (of approved quality) complete with 6 mm thick hard board

ground fixed to wooden cleats with C.P. brass screws and washers

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all

17 CPVC plain & brass threaded fittings This includes jointing of pipes &

fittings with one step CPVC solvent cement, trenching, refilling &

testing of joints complete as per direction of Engineer in Charge.

18.9.3 25 mm nominal dia Pipes Rm 30.00 370.65 11,119.50

18.9.4 32 mm nominal dia Pipes Rm 20.00 435.05 8,701.00

18.9.5 40 mm nominal dia Pipes Rm 10.00 559.20 5,592.00

Constructing masonry Chamber 60x60x75 cm inside, in brick work in

cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with

C.I. surface box 100mm top diameter, 160 mm bottom diameter

and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4

18 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm

nominal size ) , i/c necessary excavation, foundation concrete

1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm

nominal size) and inside plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12 mm thick, finished with a floating coat of

neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class

C Repair to Plaster and Plinth Protection

15 mm cement plaster on the rough side of single or half brick wall

12 mm cement plaster on the rough side of single or half brick wall

Distempering with 1st quality acrylic distemper (Ready mix) having

VOC content less than 50 grams/ litre of approved brand and

manufacture to give an even shade : 13.90.1 Old work (one or more

Old work (one or more coats) Sqm 5952.82 56.80 3,38,120.41

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Academic Block

Finishing walls with Acrylic Smooth exterior paint of required shade :

Dismantling old plaster or skirting raking out joints and cleaning the

4 15.56 surface for plaster including disposal of rubbish to the dumping

ground within 50 metres lead.

As per actual measurement

6.44 +4.17 Repair for Plinth Protection Sqm 177.00 737.45 1,30,530.86

D Repairs to Internal Wiring and Fans/Light Fittings

Rewiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

1 cable and 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable as earth wire in existing surface/ recessed steel/PVC

conduit including dismantling as required.

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable and 1.5 sq.mm FRLS

2 1.16 PVC insulated copper conductor single core cable as earth wire in No 30.00 894.00 26,820.00

existing surface/ recessed steel/PVC conduit including dismantling as

Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core

cable in surface/ recessed medium class PVC conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper

4 conductor, single core cable in the existing surface/ recessed steel/

PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit

along with accessories in surface/recess including cutting the wall

and making good the same in case of recessed conduit as required.

Supplying and fixing metal box of following sizes (nominal size) on

6 surface or in recess with suitable size of phenolic laminated sheet

cover in front including painting etc. as required.

7 Supplying and fixing following piano type switch/ socket on the

existing switch box/ cover including connections etc. as required.

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Academic Block

8 1.23.6 Telephone socket outlet No 8.00 109.00 872.00

Supplying and fixing two module stepped type electronic fan

9 1.25 regulator on the existing modular plate switch box including No 60.00 369.00 22,140.00

connections but excluding modular plate etc. as required.

10 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction No 60.00 87.00 5,220.00

box/ wooden block including connections etc. as required.

Installation, testing and commissioning of ceiling fan, including

wiring the down rods of standard length (upto 30 cm) with 1.5 sq.

mm FRLS PVC insulated, copper conductor, single core cable etc. as

Installation of exhaust fan in the existing opening, including making

12 1.50.2 good the damage, connection, testing, commissioning etc. as

Supplying and fixing following way, single pole and neutral, sheet

steel, MCB distribution board, 240 V, on surface/ recess, complete

13 with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including

accessories, and providing masonry enclosure with cover plate

having locking arrangement and watering pipe etc. with charcoal/

coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground

15 5.7 level for conductor earth electrode, including connection/ termination Rm 80.00 51.00 4,080.00

with GI thimble etc. as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter

below ground as strip earth electrode, including connection/

16 5.8 terminating with nut, bolt, spring, washer etc. as required. (Jointing Rm 40.00 972.00 38,880.00

shall be done by overlapping and with 2 sets of brass nut bolt &

spring washer spaced at 50 mm)

Erection of RCC/ PCC pole of following length in brick ballast and

ramming the foundation, finishing with 150 mm thick cement

concrete (1:3:6) layer on top with including excavation and refilling

etc. as required.

18 Market Ceiling Fans Havell's type No 4.00 2,500.00 10,000.00

E Repair to Door /Window

Dismantling doors, windows and clerestory windows (steel or wood)

1 15.12.1 shutter including chowkhats, architrave, holdfasts etc. complete and

stacking within 50 metres lead :

Of area 3 sq. metres and below No 42.00 302.70 12,713.40

Providing and fixing factory made uPVC white colour sliding glazed

window upto 1.50 m in height dimension comprising of uPVC multi-

chambered frame with in-built roller track and sash extruded profiles

duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel

section made from roll forming process of required length (shape &

size according to uPVC profile), appropriate dimension of uPVC

extruded glazing beads and uPVC extruded interlocks, EPDM gasket,

wool pile, zinc alloy (white powder coated) touch locks with hook,

zinc alloy body with single nylon rollers (weight bearing capacity to

be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished

2 9.147D.1 wall and necessary stainless steel screws etc. Profile of frame & sash Sqm 62.78 7,634.10 4,79,230.63

shall be mitred cut and fusion welded at all corners, including drilling

of holes for fixing hardware's and drainage of water etc. After fixing

frame the gap between frame and adjacent finished wall shall be

filled with weather proof silicon sealent over backer rod of required

size and of approved quality, all complete as per approved drawing

& direction of Engineer-in-Charge. (Single / double glass panes, wire

mesh and silicon sealent shall be paid separately). Variation in

profile dimension in higher side shall be accepted but no extra

payment on this account shall be made.

Note: For uPVC frame and sash extruded profiles minus 5%

tolerance in dimension i.e. in depth & width of profile shall be

Two track two panels sliding window made of (small series) frame

9.147D.1 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ±

0.2 mm and single glazing bead of appropriate dimension. (Area of

window upto 1.75 sqm)

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Academic Block

Providing & fixing glass panes with putty and glazing clips in steel

doors, windows, clerestory windows, all complete with :

4.0 mm thick glass panes Sqm 62.78 940.30 59,027.33

Providing and fixing factory made single extruded WPC (Wood

Polymer Composite) solid door/window/Ceosetory windows & other

Frames/Chowkhat comprising of virgin PVC polymer of K value 58-

60 (Suspension Grade), calcium carbonate and natural fibers (wood

powder/ rice husk/wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) fabricated with miter joints after

applying PVC solvent cement and screwed with full body threaded

star headed SS screws having minimum frame density of 750

kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N

4 26.86.6 (Edge), minimum compressive strength of 58 N/mm2, modulus of

elasticity900 N/mm2 and resistance to spread of flame of Class A

with property of being termite/borer proof, water/moisture proof and

fire retardant and fixed in position with M.S hold fast/lugs/SS dash

fasteners of required dia and length complete as per direction of

Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall

be paid for separately)

Note: For WPC solid door/window frames, minus 5mm tolerance in

dimensions i.e depth and width of profile shall be acceptable.

Variation in profile dimensions on plus side shall be acceptable but

no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood

Polymer Composite) solid plain flush door shutter of required size

comprising of virgin polymer of K value 58-60 (Suspension Grade),

calcium carbonate and natural fibers (wood powder/ rice husk/wheat

husk) and non toxic additives (maximum toxicity index of 12 for 100

gms) having minimum density of 650 kg/cum and screw withdrawal

strength of 1800 N (Face) & 900 N (Edge), minimum compressive

strength 50 N/mm2, modulus of elasticity 850 N/mm2 and

resistance to spread of flame of Class A category with property of

being termite/ borer proof, water/moisture proof and fire retardant

and fixing with stainless steel butt hinges of required size with

necessary full body threaded star headed counter sunk S.S screws,

all as per direction of Engineer-In- Charge. (Note: stainless steel

butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories & stainless

6 10.28 steel dash fasteners , stainless steel bolts etc., of required size, on Kg 210.00 612.25 1,28,572.50

the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-in charge, (for payment

purpose only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.).

Finishing with Epoxy paint (two or more coats) at all locations

7 13.52.2 prepared and applied as per manufacturer's specifications including

appropriate priming coat, preparation of surface, etc. complete.

On steel work Sqm 31.39 202.70 6,362.25

Providing and fixing M.S. grills of required pattern in frames of

8 10.29 windows etc. with M.S. flats, square or round bars etc. including

priming coat with approved steel primer all complete.

Fixed to openings /wooden frames with rawl plugs screws etc Kg 941.63 99.70 93,880.01

F Repair to Flooring

Dismantling tile work in floors and roofs laid in cement mortar

including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm Sqm 2703.50 60.50 1,63,561.47

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Academic Block

Providing and laying Vitrified tiles in floor in different sizes (thickness

to be specified by the manufacturer) with water absorption less than

0.08% and conforming to IS:15622, of approved brand &

manufacturer, in all colours and shade, laid on 20 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement

2 11.41(A).1.1 slurry @3.3 kg/sqm including grouting the joints with white cement

and matching pigments etc. The tiles must be cut with the zero

chipping diamond cutter only . Laying of tiles will be done with the

notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily.

Double charge vitrified tile polished finish of size

Providing and laying 60mm thick faciory made cement concrete

interlocking paver block of M -30 grade made by block making

machine with strong vibratory compaction, of approved size, design

3 16.68 & shape, laid in required colour and pattern over and including Sqm 820.25 - -

50mm thick compacted bed of coarse sand, filling the joints with line

sand etc. all complete as per the direction of Engineer-in-charge.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and

pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement:

4 11.26.1 3 coarse sand) and jointed with grey cement slurry mixed with

pigment to match the shade of the slabs, including rubbing and

polishing complete.

Providing and laying Polished Granite stone flooring in required

design and patterns, in linear as well as curvilinear portions of the

building all complete as per the architectural drawings with 18 mm

thick stone slab over 20 mm (average) thick base of cement mortar

5 11.56.1 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry

and pointing with white cement slurry admixed with pigment of

matching shade including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby Red or

6 13.52.2 Applying priming coat:

With ready mixed red oxide zinc chromate primer of approved brand

and manufacture on steel galvanised iron/ steel works

SUB TOTAL 68,20,249.55

Digitally signed by Rakesh

REPAIR OF EXISTING SENIOR BOYS' HOSTEL (GF)

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Senior Boys' Hostel

A Repairs to Roof

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer, 5 mm thick water proofing membrane, black

finished reinforced with glass fibre matt consisting of a coat of bitumen

primer for bitumen membrane @ 0.40 litre/sqm by the same membrane

manufactured ofdensity at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160

cps. Over the primer coat the layer of membrane shall be laid using butane

torch and sealing all joints etc., and preparing the surface complete. The vital

1 MR physical and chemical parameters of the membrane shall be as under : Joint Sqm 1110.48 878.6 9,75,667.73

strength in longitudinal and transverse direction at 23 ° C as 350/300 N/5

Tear strength in longitudinal and transverse direction as 60/80N. Softening

point of membrane not less than 150° C. Cold flexibility shall be upto -2 ° C

when tested in accordance with ASTM, D - 5147. The laying of membrane

shall be got done through the authorisedapplicator of the manufacturer of

membrane : 5 mm thick

B Repairs to Toilets

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer), of approved make, in

all colours, shades except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of steps and dados, over

12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality conforming to

IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red

2 11.37 Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Sqm 84.35 935.6 78,920.20

Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints

with white cement and matching pigment etc., complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain &

brass threaded fittings, including fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.3 25 mm nominal outer dia Pipes Rm 110.00 408.55 44,940.50

18.7.4 32 mm nominal outer dia Pipes Rm 65.00 500.95 32,561.75

18.7.5 40 mm nominal outer dia Pipes Rm 110.00 674.35 74,178.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain &

brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent cement

and the cost of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge. Concealed work,

including cutting chases and making good the walls

18.8.2 20 mm nominal outer dia Pipes Rm 55.00 513.75 28,256.25

18.8.3 25 mm nominal outer dia Pipes Rm 65.00 626.5 40,722.50

Providing and fixing C.P. brass stop cock (concealed) of standard design and

of approved make conforming to IS:8931.

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and

of approved make conforming to IS:8931.

15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality

conforming to IS standards and weighing not less than 810 gms.

7 Providing and fixing brass stop cock of approved quality :

20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of

approved make and quality as per direction of Engineer-in-charge.

10 Providing and fixing PTMT grating of approved quality and colour.

Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil

waste ventilating pipes and fittings of the following outside diameter

conforming to ISI No.13592/1992 to walls with nails,bobbins and wooden

plugs or laying in trenches including jointing with supply of approved rubber

lubricant by non-heat application method/as per manufacturer's

specification,testing,earthwork in excavation in all kinds of soil and refilling

of trenches as per specification and direction of Engineer-in-charge

a OPWD 110mm dia U-PVC SWR Pipe (Supreme/Ashirvad) Rm 280.00 456.9 1,27,932.00

b 110mm dia U-PVC Door Tee No 36.00 322.7 11,617.20

c 110mm dia U-PVC Plain Tee No 36.00 293.6 10,569.60

d 110mm dia U-PVC Door Bend No 36.00 232 8,352.00

e 110mm dia U-PVC Plain Band No 36.00 232 8,352.00

f 110mm dia U-PVC Plain Shoe Bend No 36.00 407.4 14,666.40

g 110mm dia U-PVC Offset without ear No 25.00 58.2 1,455.00

h 110mm dia U-PVC Cowl No 36.00 299.2 10,771.20

i 110mm dia U-PVC P-Trap No 36.00 497.3 17,902.80

j 75mm U-PVC SWR Pipes(Supreme/Ashirvad) Rm 65.00 225.1 14,631.50

k 75mm U-PVC Door Bend No 36.00 184 6,624.00

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with

100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing

cistern, including flush pipe, with manually controlled device (handle lever)

conforming to IS : 7231, with all fittings and fixtures complete, including

cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with

integral type foot rests

Providing and fixing white vitreous china flat back or wall corner type lipped

front urinal basin of 430x260x350 mm and 340x410x265 mm sizes

respectively with automatic flushing cistern with standard flush pipe and

C.P. brass spreaders with brass unions and G.I clamps complete, including

painting of fittings and brackets, cutting and making good the walls and

floors wherever required :

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern No 24.00 5268.85 1,26,452.40

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm

C.P. brass pillar taps

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

15 17.31 approved quality) complete with 6 mm thick hard board ground fixed to No 28.00 1411.15 39,512.20

wooden cleats with C.P. brass screws and washers complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply including all CPVC plain & brass

16 threaded fittings This includes jointing of pipes & fittings with one step CPVC

solvent cement, trenching, refilling & testing of joints complete as per

direction of Engineer in Charge.

18.9.3 25 mm nominal dia Pipes Rm 60.00 370.65 22,239.00

18.9.4 32 mm nominal dia Pipes Rm 40.00 435.05 17,402.00

18.9.5 40 mm nominal dia Pipes Rm 30.00 559.2 16,776.00

Constructing masonry Chamber 60x60x75 cm inside, in brick work in

cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I.

surface box 100mm top diameter, 160 mm bottom diameter and 180 mm

deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2

coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary

excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded

stone aggregate 40 mm nominal size) and inside plastering with cement

mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating

coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation 7.

C Repair to Plaster and Plinth Protection

Dismantling old plaster or skirting raking out joints and cleaning the surface

16 15.56 for plaster including disposal of rubbish to the dumping ground within 50 Sqm 80.00 45.05 3,604.00

15 mm cement plaster on the rough side of single or half brick wall of mix :

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

12 mm cement plaster on the rough side of single or half brick wall of mix :

1:6 (1 cement: 6 fine sand) Sqm 35.00 282 9,870.00

Distempering with 1st quality acrylic distember (Ready mix) having VOC

content less than 50 grams/ litre of approved brand and manufacture to give

an even shade : 13.90.1 Old work (one or more coats)

20 13.111.2 Finishing walls with Acrylic Smooth exterior paint of required shade : Sqm 1737.68 74.45 1,29,369.90

Finishing with Epoxy paint (two or more coats) at all locations prepared and

30 13.52.1 applied as per manufacturer's specifications including appropriate priming

coat, preparation of surface, etc. complete.

On steel work Sqm 110.68 201.70 22,324.16

31 13.52.1 Applying priming coat:

With ready mixed red oxide zinc chromate primer of approved brand and

manufacture on steel galvanised iron/ steel works

6.44 +4.17 Repair for Plinth Protection Sqm 176.75 737.45 1,30,344.29

D Repairs to Internal Wiring and Fans/Light Fittings

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable and 1.5

1 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire

in existing surface/ recessed steel/PVC conduit including dismantling as

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable as earth wire in existing surface/

recessed steel/PVC conduit including dismantling as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following

3 sizes of FRLS PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper

4 conductor, single core cable in the existing surface/ recessed steel/ PVC

conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along

5 with accessories in surface/recess including cutting the wall and making

good the same in case of recessed conduit as required.

Supplying and fixing metal box of following sizes (nominal size) on surface

6 or in recess with suitable size of phenolic laminated sheet cover in front

including painting etc. as required.

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Supplying and fixing following piano type switch/ socket on the existing

switch box/ cover including connections etc. as required.

7d 1.23.4 3 pin 5/6 A socket outlet No 40 69 2,760.00

8 1.23.6 Telephone socket outlet No 8 109 872.00

Supplying and fixing two module stepped type electronic fan regulator on

9 1.25 the existing modular plate switch box including connections but excluding No 144 369 53,136.00

modular plate etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/

wooden block including connections etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the

11 1.44 down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC No 144 213 30,672.00

insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the

damage, connection, testing, commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/ recess, complete with tinned copper

13 bus bar, neutral bus bar, earth bar, din bar, interconnections, powder

painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe etc. with charcoal/ coke and salt as

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for

15 5.7 conductor earth electrode, including connection/ termination with GI Rm 80 51 4,080.00

thimble etc. as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below

ground as strip earth electrode, including connection/ terminating with nut,

16 5.8 bolt, spring, washer etc. as required. (Jointing shall be done by overlapping Rm 40 972 38,880.00

and with 2 sets of brass nut bolt & spring washer spaced at 50 mm)

Erection of RCC/ PCC pole of following length in brick ballast and ramming

the foundation, finishing with 150 mm thick cement concrete (1:3:6) layer

on top with including excavation and refilling etc. as required.

18 Market Ceiling Fans Havell's type No 4 2500 10,000.00

E Repairs to Door/Windows

Dismantling doors, windows and clerestory windows (steel or wood) shutter

21 15.12.1 including chowkhats, architrave, holdfasts etc. complete and stacking within

50 metres lead :

Of area 3 sq. metres and below No 372.00 302.7 1,12,604.40

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Providing and fixing factory made uPVC white colour sliding glazed window

upto 1.50 m in height dimension comprising of uPVC multi-chambered

frame with in-built roller track and sash extruded profiles duly reinforced

with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll

forming process of required length (shape & size according to uPVC profile),

appropriate dimension of uPVC extruded glazing beads and uPVC extruded

interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch

locks with hook, zinc alloy body with single nylon rollers (weight bearing

capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to

finished wall and necessary stainless steel screws etc. Profile of frame & sash

shall be mitred cut and fusion welded at all corners, including drilling of

holes for fixing hardware's and drainage of water etc. After fixing frame the

gap between frame and adjacent finished wall shall be filled with weather

proof silicon sealent over backer rod of required size and of approved

quality, all complete as per approved drawing & direction of Engineer-in-

Charge. (Single / double glass panes, wire mesh and silicon sealent shall be

paid separately). Variation in profile dimension in higher side shall be

accepted but no extra payment on this account shall be made.

Note: For uPVC frame and sash extruded profiles minus 5% tolerance in

dimension i.e. in depth & width of profile shall be acceptable.

Two track two panels sliding window made of (small series) frame 52 x 44

mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single

glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Providing & fixing glass panes with putty and glazing clips in steel doors,

windows, clerestory windows, all complete with :

4.0 mm thick glass panes Sqm 221.36 940.3 2,08,144.81

Providing & fixing fly proof wire gauze to windows, clerestory windows &

doors with M.S. Flat 15x3 mm and nuts & bolts complete

Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/window/Ceosetory windows & other

Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60

(Suspension Grade), calcium carbonate and natural fibers (wood powder/

rice husk/wheat husk) and non toxic additives (maximum toxicity index of

12 for 100 gms) fabricated with miter joints after applying PVC solvent

cement and screwed with full body threaded star headed SS screws having

minimum frame density of 750 kg/cum, screw withdrawal strength of 2200

N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,

modulus of elasticity900 N/mm2 and resistance to spread of flame of Class A

with property of being termite/borer proof, water/moisture proof and

fire retardant and fixed in position with M.S hold fast/lugs/SS dash

fasteners of required dia and length complete as per direction of

Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall

be paid for separately)

Note: For WPC solid door/window frames, minus 5mm tolerance in

dimensions i.e depth and width of profile shall be acceptable. Variation in

profile dimensions on plus side shall be acceptable but no extra payment on

this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid plain flush door shutter of required size comprising of

virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and

natural fibers (wood powder/ rice husk/wheat husk) and non toxic

additives (maximum toxicity index of 12 for 100 gms) having minimum

density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) &

900 N (Edge), minimum compressive strength 50 N/mm2, modulus of

elasticity 850 N/mm2 and resistance to spread of flame of Class A category

with property of being termite/ borer proof, water/moisture proof and fire

retardant and fixing with stainless steel butt hinges of required size with

necessary full body threaded star headed counter sunk S.S screws, all as per

direction of Engineer-In- Charge. (Note: stainless steel butt hinges and

necessary S.S screws shall be paid separately)

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of

cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to

receive shutter of 30 mm thickness. The laminate shall be moulded with fire

resistant grade unsaturated polyester resin and chopped mat. Door frame

laminate shall be 2mm thick and shall be filled with suitable wooden block in

all the three legs. The frame shall be covered with fiber glass from all sides.

M.S. stay shall be provided at the bottom to steady the frame

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of

required colour and approved brand and manufacture, made with fire -

retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP

29 9.122.1 laminate for forming hollow rails and styles, with wooden frame and Sqm 63.00 702.6 44,263.80

suitable blocks of seasoned wood inside at required places for fixing of

fittings, cast monolithically with 5 mm thick FRP laminate for panels

conforming to IS: 14856, including fixing to frames

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing with

necessary accessories & stainless steel dash fasteners , stainless steel bolts

etc., of required size, on the top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer-in charge, (for payment

purpose only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing M.S. grills of required pattern in frames of windows etc.

36 10.29 with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete.

Fixed to openings /wooden frames with rawl plugs screws etc Kg 3320.40 99.7 3,31,043.88

F Repairs to Flooring

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid

on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and

2 11.26.1 jointed with grey cement slurry mixed with pigment to match the shade of Sqm 793.66 1706.6 13,54,451.62

the slabs, including rubbing and polishing complete. (Ground Floor)

Providing and laying 60mm thick faciory made cement concrete interlocking

paver block of M -30 grade made by block making machine with strong

vibratory compaction, of approved size, design & shape, laid in required

colour and pattern over and including 50mm thick compacted bed of coarse

sand, filling the joints with line sand etc. all complete as per the direction of

Engineer-in-charge.

Paver Block in Courtyard

Providing and laying Polished Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete

as per the architectural drawings with 18 mm thick stone slab over 20 mm

(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid

and jointed with cement slurry and pointing with white cement slurry

admixed with pigment of matching shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in-

Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

SUB TOTAL 1,11,57,884.21

Digitally signed by Rakesh

REPAIR OF EXISTING JUNIOR BOYS' HOSTEL

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Junior Boys' Hostel

A Repairs to Roof

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer, 5 mm thick water proofing membrane, black finished

reinforced with glass fibre matt consisting of a coat of bitumen primer for

bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured

ofdensity at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer

coat the layer of membrane shall be laid using butane torch and sealing all joints

etc., and preparing the surface complete. The vital physical and chemical

parameters of the membrane shall be as under : Joint strength in longitudinal and

transverse direction at 23°C as 350/300 N/5 cm.

Tear strength in longitudinal and transverse direction as 60/80N. Softening point

of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested

in accordance with ASTM, D - 5147. The laying of membrane shall be got done

through the authorisedapplicator of the manufacturer of membrane : 5 mm thick

B Repairs to Toilets

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-

1 8.31 in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement Sqm 191.10 1063.45 2,03,225.30

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @

3.3kg per sqm, including pointing in white cement mixed with pigment of

matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to

be specified by the manufacturer) of 1st quality conforming to IS : 15622 of

approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20

mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey

cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and

matching pigment etc., complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

3 fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement and testing of joints

complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.3 25 mm nominal outer dia Pipes Rm 45 408.55 18,384.75

18.7.4 32 mm nominal outer dia Pipes Rm 27 500.95 13,525.65

18.7.5 40 mm nominal outer dia Pipes Rm 35 674.35 23,602.25

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of

4 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases

and making good the same including testing of joints complete as per direction of

Engineer in Charge. Concealed work, including cutting chases and making good

18.8.2 20 mm nominal outer dia Pipes Rm 23 513.75 11,816.25

18.8.3 25 mm nominal outer dia Pipes Rm 23 626.50 14,409.50

Providing and fixing C.P. brass stop cock (concealed) of standard design and of

approved make conforming to IS:8931.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of

approved make conforming to IS:8931.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming

to IS standards and weighing not less than 810 gms.

8 Providing and fixing brass stop cock of approved quality :

20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved

make and quality as per direction of Engineer-in-charge.

10 18.58.1.1 Providing and fixing PTMT grating of approved quality and colour. No 28 33.20 929.60

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Junior Boys' Hostel

Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste

ventilating pipes and fittings of the following outside diameter conforming to ISI

No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in

trenches including jointing with supply of approved rubber lubricant by non-heat Rm 280 456.90 1,27,932.00

application method/as per manufacturer's specification,testing,earthwork in

excavation in all kinds of soil and refilling of trenches as per specification and

direction of Engineer-in-charge

a OPWD 110mm dia U-PVC SWR Pipe (Supreme/Ashirvad)

b 110mm dia U-PVC Door Tee No 18 322.70 5,808.60

c 110mm dia U-PVC Plain Tee No 18 293.60 5,284.80

d 110mm dia U-PVC Door Bend No 18 232.00 4,176.00

e 110mm dia U-PVC Plain Band No 18 232.00 4,176.00

f 110mm dia U-PVC Plain Shoe Bend No 18 407.40 7,333.20

g 110mm dia U-PVC Offset without ear No 18 58.20 1,047.60

h 110mm dia U-PVC Cowl No 18 299.20 5,385.60

i 110mm dia U-PVC P-Trap No 18 497.30 8,951.40

j 75mm U-PVC SWR Pipes(Supreme/Ashirvad) Rm 20 225.10 4,502.00

k 75mm U-PVC Door Bend No 18 184.00 3,312.00

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100

mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern,

11 including flush pipe, with manually controlled device (handle lever) conforming

to IS : 7231, with all fittings and fixtures complete, including cutting and making

good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral

type foot rests

Providing and fixing white vitreous china flat back or wall corner type lipped front

urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with

11 automatic flushing cistern with standard flush pipe and C.P. brass spreaders with

brass unions and G.I clamps complete, including painting of fittings and brackets,

cutting and making good the walls and floors wherever required :

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern No 12 5268.85 63,226.20

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32

12 mm C.P. brass waste of standard pattern, including painting of fittings and

brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.

brass pillar taps

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

13 17.31 approved quality) complete with 6 mm thick hard board ground fixed to wooden No 28 1411.15 39,512.20

cleats with C.P. brass screws and washers complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply including all CPVC plain & brass threaded

14 fittings This includes jointing of pipes & fittings with one step CPVC solvent

cement, trenching, refilling & testing of joints complete as per direction of

Engineer in Charge.

18.9.3 25 mm nominal dia Pipes Rm 25 370.65 9,266.25

18.9.4 32 mm nominal dia Pipes Rm 15 435.05 6,525.75

18.9.5 40 mm nominal dia Pipes Rm 12 559.20 6,710.40

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box

100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with

chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

15 aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete

1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)

and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm

thick, finished with a floating coat of neat cement complete as per standard design

18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7. No 10 10102.50 1,01,025.00

C Repair to Plaster and Plinth Protection

Dismantling old plaster or skirting raking out joints and cleaning the surface for

16 15.56 plaster including disposal of rubbish to the dumping ground within 50 metres Sqm 34.00 45.05 1,531.70

17 13.2.2 15 mm cement plaster on the rough side of single or half brick wall of mix :

1:6 (1 cement: 6 fine sand)

As per actual measurement Sqm 17.00 324.30 5,513.10

18 13.1.2 12 mm cement plaster on the rough side of single or half brick wall of mix :

1:6 (1 cement: 6 fine sand)

As per actual measurement Sqm 17.00 282.00 4,794.00

Distempering with 1st quality acrylic distember (Ready mix) having VOC content

19 13.90.1 less than 50 grams/ litre of approved brand and manufacture to give an even

shade : 13.90.1 Old work (one or more coats)

Old work (one or more coats) Sqm 2089.89 56.80 1,18,705.78

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Junior Boys' Hostel

20 13.111.2 Finishing walls with Acrylic Smooth exterior paint of required shade : Sqm 1231.72 74.75 92,071.11

Finishing with Epoxy paint (two or more coats) at all locations prepared and

30 13.52.1 applied as per manufacturer's specifications including appropriate priming coat,

preparation of surface, etc. complete.

On steel work Sqm 65.93 201.70 13,298.08

31 13.50.3 Applying priming coat:

With ready mixed red oxide zinc chromate primer of approved brand and

manufacture on steel galvanised iron/ steel works

6.44 +4.17 Repair for Plinth Protection Sqm 107.74 737.45 79,452.86

D Repairs to Internal Wiring and Fans/Light Fittings

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable as earth wire in existing

surface/ recessed steel/PVC conduit including dismantling as required.

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable as earth wire in existing surface/ recessed steel/PVC conduit

including dismantling as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes

3 of FRLS PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor,

single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with

5 accessories in surface/recess including cutting the wall and making good the

same in case of recessed conduit as required.

Supplying and fixing metal box of following sizes (nominal size) on surface or in

6 recess with suitable size of phenolic laminated sheet cover in front including

painting etc. as required.

Supplying and fixing following piano type switch/ socket on the existing switch

box/ cover including connections etc. as required.

7d 1.23.4 3 pin 5/6 A socket outlet No 21 69.00 1,449.00

8 1.23.6 Telephone socket outlet No 5 109.00 545.00

Supplying and fixing two module stepped type electronic fan regulator on the

9 1.25 existing modular plate switch box including connections but excluding modular No 70 369.00 25,830.00

plate etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden

block including connections etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down

11 1.44 rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper No 70 213.00 14,910.00

conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the

damage, connection, testing, commissioning etc. as required.

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Junior Boys' Hostel

Supplying and fixing following way, single pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/ recess, complete with tinned copper bus

bar, neutral bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without MCB/RCCB/Isolator)

13b 8 way, Double door No 4 2573.00 10,292.00

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and

14 5.2 providing masonry enclosure with cover plate having locking arrangement and No 4 6855.00 27,420.00

watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for

15 5.7 conductor earth electrode, including connection/ termination with GI thimble etc. Rm 80 51.00 4,080.00

Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as

strip earth electrode, including connection/ terminating with nut, bolt, spring,

washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of

brass nut bolt & spring washer spaced at 50 mm)

Erection of RCC/ PCC pole of following length in brick ballast and ramming the

17 11.1.1 foundation, finishing with 150 mm thick cement concrete (1:3:6) layer on top No 4 5566.00 22,264.00

with including excavation and refilling etc. as required.

18 Ceiling Fans Havell's type No 4 2500.00 10,000.00

E Repairs to Door/Windows

Dismantling doors, windows and clerestory windows (steel or wood) shutter

21 15.12.1 including chowkhats, architrave, holdfasts etc. complete and stacking within 50

Of area 3 sq. metres and below No 216.00 302.70 65,383.20

Providing and fixing factory made uPVC white colour sliding glazed window upto

1.50 m in height dimension comprising of uPVC multi-chambered frame with in-

built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm

thick galvanized mild steel section made from roll forming process of required

length (shape & size according to uPVC profile), appropriate dimension of uPVC

extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile,

zinc alloy (white powder coated) touch locks with hook, zinc alloy body with

single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8

22 9.147D.1 mm size for fixing frame to finished wall and necessary stainless steel screws etc.

Profile of frame & sash shall be mitred cut and fusion welded at all corners,

including drilling of holes for fixing hardware's and drainage of water etc. After

fixing frame the gap between frame and adjacent finished wall shall be filled with

weather proof silicon sealent over backer rod of required size and of approved

quality, all complete as per approved drawing & direction of Engineer-in-Charge.

(Single / double glass panes, wire mesh and silicon sealent shall be paid

separately). Variation in profile dimension in higher side shall be accepted but no

extra payment on this account shall be made.

Note: For uPVC frame and sash extruded profiles minus 5% tolerance in

dimension i.e. in depth & width of profile shall be acceptable.

Two track two panels sliding window made of (small series) frame 52 x 44 mm

&sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing Sqm 150.32 7634.10 11,47,557.91

bead of appropriate dimension. (Area of window upto 1.75 sqm)

Providing & fixing glass panes with putty and glazing clips in steel doors,

windows, clerestory windows, all complete with :

4.0 mm thick glass panes Sqm 131.86 940.30 1,23,987.96

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors

with M.S. Flat 15x3 mm and nuts & bolts complete

Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat

comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium

carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non

toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter

joints after applying PVC solvent cement and screwed with full body threaded star

headed SS screws having minimum frame density of 750 kg/cum, screw

26 26.86.6 withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive

strength of 58 N/mm2, modulus of elasticity900 N/mm2 and resistance to spread

of flame of Class A category

with property of being termite/borer proof, water/moisture proof and

fire retardant and fixed in position with M.S hold fast/lugs/SS dash

fasteners of required dia and length complete as per direction of

Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall

be paid for separately)

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Junior Boys' Hostel

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions

i.e depth and width of profile shall be acceptable. Variation in profile dimensions

on plus side shall be acceptable but no extra payment on this account shall be

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid plain flush door shutter of required size comprising of virgin

polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural

fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and

screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum

compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and

resistance to spread of flame of Class A category with property of being termite/

borer proof, water/moisture proof and fire retardant and fixing with stainless

steel butt hinges of required size with necessary full body threaded star headed

counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note:

stainless steel butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-

section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter

of 30 mm thickness. The laminate shall be moulded with fire resistant grade

28 9.121 unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm Rm 135.80 702.60 95,413.08

thick and shall be filled with suitable wooden block in all the three legs. The frame

shall be covered with fiber glass from all sides. M.S. stay shall be provided at the

bottom to steady the frame

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of

required colour and approved brand and manufacture, made with fire - retardant

grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for

29 9.122.1 forming hollow rails and styles, with wooden frame and suitable blocks of Sqm 44.10 3496.75 1,54,206.68

seasoned wood inside at required places for fixing of fittings, cast monolithically

with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary accessories &

35 10.28 stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top Kg 420.00 612.25 2,57,145.00

of the floor or the side of waist slab with suitable arrangement as per approval of

Engineer-in charge, (for payment purpose only weight of stainless steel

members shall be considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

Providing and fixing M.S. grills of required pattern in frames of windows etc. with

36 10.29 M.S. flats, square or round bars etc. including priming coat with approved steel

primer all complete.

Fixed to openings /wooden frames with rawl plugs screws etc Kg 2254.80 99.70 2,24,803.56

F Repairs to Flooring

Dismantling tile work in floors and roofs laid in cement mortar including stacking

material within 50 metres lead.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on

12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed

with grey cement slurry mixed with pigment to match the shade of the slabs,

including rubbing and polishing complete. (Ground Floor)

Providing and laying 60mm thick faciory made cement concrete interlocking

paver block of M -30 grade made by block making machine with strong vibratory

3 16.68 compaction, of approved size, design & shape, laid in required colour and pattern

over and including 50mm thick compacted bed of coarse sand, filling the joints

with line sand etc. all complete as per the direction of Engineer-in-charge.

Paver Block in Courtyard

DSS No 16.68 @951.00 per Sqm

Providing and laying Polished Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete as

per the architectural drawings with 18 mm thick stone slab over 20 mm (average)

4 11.56.1 thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with

cement slurry and pointing with white cement slurry admixed with pigment of

matching shade including rubbing, curing and polishing etc. all complete as

specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent Sqm 27.00 3908.80 1,05,537.60

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Junior Boys' Hostel

SUB TOTAL 59,63,382.99

Digitally signed by Rakesh

REPAIR OF EXISTING SENIOR GIRLS' HOSTEL (GF)

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Senior Girls' Hostel

A Repairs to Roof

Providing and laying APP (Atactic Polypropylene Polymer)

modified prefabricated five layer, 5 mm thick water proofing

membrane, black finished reinforced with glass fibre matt

consisting of a coat of bitumen primer for bitumen

membrane @ 0.40 litre/sqm by the same membrane

manufactured ofdensity at 25 ° C, 0.87 - 0.89 kg/litre and

viscocity 70 - 160 cps. Over the primer coat the layer of

membrane shall be laid using butane torch and sealing all

joints etc., and preparing the surface complete. The vital

physical and chemical parameters of the membrane shall be

as under : Joint strength in longitudinal and transverse

direction at 23 ° C as 350/300 N/5 cm. Tear strength in

longitudinal and transverse direction as 60/80N. Softening

point of membrane not less than 150°C. Cold flexibility shall

be upto -2 ° C when tested in accordance with ASTM, D -

5147. The laying of membrane shall be got done through the

authorisedapplicator of the manufacturer of membrane : 5

B Repairs to Toilets

Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as

1 8.31 approved by Engineer-in-Charge, in skirting, risers of steps Sqm 191.10 1063.45 2,03,225.30

and dados, over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement

slurry @ 3.3kg per sqm, including pointing in white cement

mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size

300x300 mm (thickness to be specified by the

manufacturer) of 1st quality conforming to IS : 15622 of

approved make in colours such as White, Ivory, Grey, Fume

Red Brown, laid on 20 mm thick cement mortar 1:4 (1

Cement : 4 Coarse sand), Jointing with grey cement slurry

@ 3.3 kg/sqm including pointing the joints with white

cement and matching pigment etc., complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

3 fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of

Engineer in Charge.

Internal work - Exposed on wall

18.7.3 25 mm nominal outer dia Pipes Rm 45 408.55 18,384.75

18.7.4 32 mm nominal outer dia Pipes Rm 27 500.95 13,525.65

18.7.5 40 mm nominal outer dia Pipes Rm 35 674.35 23,602.25

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes

4 jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the

same including testing of joints complete as per direction of

Engineer in Charge. Concealed work, including cutting

chases and making good the walls

18.8.2 20 mm nominal outer dia Pipes Rm 23 513.75 11,816.25

18.8.3 25 mm nominal outer dia Pipes Rm 23 626.50 14,409.50

Providing and fixing C.P. brass stop cock (concealed) of

5 standard design and of approved make conforming to

Providing and fixing C.P. brass stop cock (concealed) of

6 standard design and of approved make conforming to

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Senior Girls' Hostel

Providing and fixing C.P. brass long nose bib cock of

7 approved quality conforming to IS standards and weighing

not less than 810 gms.

8 Providing and fixing brass stop cock of approved quality :

20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) :

Providing and fixing C.P. Brass extension nipple (size

10 18.53A 15mmx50mm) of approved make and quality as per No 13 61.70 802.10

direction of Engineer-in-charge.

Providing and fixing PTMT grating of approved quality and

Supplying all materials,labour,T&P and fitting and fixing U-

PVC SWR soil waste ventilating pipes and fittings of the

following outside diameter conforming to ISI No.13592/1992

to walls with nails,bobbins and wooden plugs or laying in

12 trenches including jointing with supply of approved rubber Rm 280 456.90 1,27,932.00

lubricant by non-heat application method/as per

manufacturer's specification,testing,earthwork in excavation

in all kinds of soil and refilling of trenches as per

specification and direction of Engineer-in-charge

a OPWD 110mm dia U-PVC SWR Pipe (Supreme/Ashirvad)

b 110mm dia U-PVC Door Tee No 18 322.70 5,808.60

c 110mm dia U-PVC Plain Tee No 18 293.60 5,284.80

d 110mm dia U-PVC Door Bend No 18 232.00 4,176.00

e 110mm dia U-PVC Plain Band No 18 232.00 4,176.00

f 110mm dia U-PVC Plain Shoe Bend No 18 407.40 7,333.20

g 110mm dia U-PVC Offset without ear No 18 58.20 1,047.60

h 110mm dia U-PVC Cowl No 18 299.20 5,385.60

i 110mm dia U-PVC P-Trap No 18 497.30 8,951.40

j 75mm U-PVC SWR Pipes(Supreme/Ashirvad) Rm 20 225.10 4,502.00

k 75mm U-PVC Door Bend No 18 184.00 3,312.00

Providing and fixing water closet squatting pan (Indian type

W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre

low level white P.V.C. flushing cistern, including flush pipe,

13 with manually controlled device (handle lever) conforming to

IS : 7231, with all fittings and fixtures complete, including

cutting and making good the walls and floors wherever

White Vitreous china Orissa pattern W.C. pan of size

580x440 mm with integral type foot rests

Providing and fixing white vitreous china flat back or wall

corner type lipped front urinal basin of 430x260x350 mm

and 340x410x265 mm sizes respectively with automatic

14 flushing cistern with standard flush pipe and C.P. brass

spreaders with brass unions and G.I clamps complete,

including painting of fittings and brackets, cutting and

making good the walls and floors wherever required :

One urinal basin with 5 litre white P.V.C. automatic flushing

Providing and fixing wash basin with C.I. brackets, 15 mm

C.P. brass pillar taps, 32 mm C.P. brass waste of standard

pattern, including painting of fittings and brackets, cutting

and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a

pair of 15 mm C.P. brass pillar taps

Providing and fixing 600x450 mm beveled edge mirror of

superior glass (of approved quality) complete with 6 mm

thick hard board ground fixed to wooden cleats with C.P.

brass screws and washers complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings This

includes jointing of pipes & fittings with one step CPVC

solvent cement, trenching, refilling & testing of joints

complete as per direction of Engineer in Charge.

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Senior Girls' Hostel

18.9.3 25 mm nominal dia Pipes Rm 25 370.65 9,266.25

18.9.4 32 mm nominal dia Pipes Rm 15 435.05 6,525.75

18.9.5 40 mm nominal dia Pipes Rm 12 559.20 6,710.40

Constructing masonry Chamber 60x60x75 cm inside, in brick

work in cement mortar 1:4 (1 cement : 4 coarse sand) for

sluice valve, with C.I. surface box 100mm top diameter, 160

mm bottom diameter and 180 mm deep ( inside) with

chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse

18 sand : 4 graded stone aggregate 20mm nominal size ) , i/c

necessary excavation, foundation concrete 1:5:10 (1 cement

: 5 fine sand : 10 graded stone aggregate 40 mm nominal

size) and inside plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12 mm thick, finished with a

floating coat of neat cement complete as per standard

With common burnt clay F.P.S.(non modular) bricks of class

C Repair to Plaster and Plinth Protection

Dismantling old plaster or skirting raking out joints and

1 15.56 cleaning the surface for plaster including disposal of rubbish Sqm 20.00 45.05 901.00

to the dumping ground within 50 metres lead.

15 mm cement plaster on the rough side of single or half

brick wall of mix :

1:6 (1 cement: 6 fine sand)

As per actual measurement Sqm 10.00 324.30 3,243.00

12 mm cement plaster on the rough side of single or half

brick wall of mix :

1:6 (1 cement: 6 fine sand)

As per actual measurement Sqm 10.00 282.00 2,820.00

Distempering with 1st quality acrylic distember (Ready mix)

having VOC content less than 50 grams/ litre of approved

brand and manufacture to give an even shade : 13.90.1 Old

work (one or more coats)

Old work (one or more coats) Sqm 2089.89 56.80 1,18,705.78

Finishing walls with Acrylic Smooth exterior paint of required

Finishing with Epoxy paint (two or more coats) at all

locations prepared and applied as per manufacturer's

specifications including appropriate priming coat, preparation

of surface, etc. complete.

On steel work Sqm 65.93 201.70 13,298.08

7 13.50.3 Applying priming coat:

With ready mixed red oxide zinc chromate primer of

approved brand and manufacture on steel galvanised iron/ Sqm 65.93 55.50 3,659.12

6.44 +4.17 Repair for Plinth Protection Sqm 106.81 737.45 78,764.08

D Repairs to Internal Wiring and Fans/Light Fittings

Rewiring for light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FRLS PVC insulated copper

1 conductor single core cable and 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable as earth wire in

existing surface/ recessed steel/PVC conduit including

dismantling as required.

Rewiring for twin control light point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable and 1.5

2 1.16 sq.mm FRLS PVC insulated copper conductor single core No 16 894.00 14,304.00

cable as earth wire in existing surface/ recessed steel/PVC

conduit including dismantling as required.

Wiring for circuit/ submain wiring alongwith earth wire with

the following sizes of FRLS PVC insulated copper conductor,

single core cable in surface/ recessed medium class PVC

conduit as required.

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Senior Girls' Hostel

Supplying and drawing following sizes of FRLS PVC insulated

4 copper conductor, single core cable in the existing surface/

recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of

recessed conduit as required.

Supplying and fixing metal box of following sizes (nominal

size) on surface or in recess with suitable size of phenolic

laminated sheet cover in front including painting etc. as

Supplying and fixing following piano type switch/ socket on

7 the existing switch box/ cover including connections etc. as

7d 1.23.4 3 pin 5/6 A socket outlet No 10 69.00 690.00

8 1.23.6 Telephone socket outlet No 4 109.00 436.00

Supplying and fixing two module stepped type electronic fan

9 1.25 regulator on the existing modular plate switch box including No 35 369.00 12,915.00

connections but excluding modular plate etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing

10 1.33 junction box/ wooden block including connections etc. as No 35 87.00 3,045.00

Installation, testing and commissioning of ceiling fan,

including wiring the down rods of standard length (upto 30

cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor,

single core cable etc. as required.

Installation of exhaust fan in the existing opening, including

12 1.50.2 making good the damage, connection, testing,

commissioning etc. as required.

Supplying and fixing following way, single pole and neutral,

sheet steel, MCB distribution board, 240 V, on surface/

13 recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia

including accessories, and providing masonry enclosure with

cover plate having locking arrangement and watering pipe

etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 meter below

15 5.7 ground level for conductor earth electrode, including Rm 80 51.00 4,080.00

connection/ termination with GI thimble etc. as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50

meter below ground as strip earth electrode, including

16 5.8 connection/ terminating with nut, bolt, spring, washer etc. Rm 40 972.00 38,880.00

as required. (Jointing shall be done by overlapping and with

2 sets of brass nut bolt & spring washer spaced at 50 mm)

Erection of RCC/ PCC pole of following length in brick ballast

and ramming the foundation, finishing with 150 mm thick

cement concrete (1:3:6) layer on top with including

excavation and refilling etc. as required.

18 Market Ceiling Fans Havell's type No 4 2500.00 10,000.00

Repairs to Door/Windows

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Senior Girls' Hostel

Dismantling doors, windows and clerestory windows (steel

21 15.12.1 or wood) shutter including chowkhats, architrave, holdfasts

etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below No 124 302.70 37,534.80

Providing and fixing factory made uPVC white colour sliding

glazed window upto 1.50 m in height dimension comprising

of uPVC multi-chambered frame with in-built roller track and

sash extruded profiles duly reinforced with 1.60 ± 0.2 mm

thick galvanized mild steel section made from roll forming

process of required length (shape & size according to uPVC

profile), appropriate dimension of uPVC extruded glazing

beads and uPVC extruded interlocks, EPDM gasket, wool

pile, zinc alloy (white powder coated) touch locks with hook,

zinc alloy body with single nylon rollers (weight bearing

capacity to be 40 kg), G.I fasteners 100 x 8 mm size for

22 9.147D.1 fixing frame to finished wall and necessary stainless steel

screws etc. Profile of frame & sash shall be mitred cut and

fusion welded at all corners, including drilling of holes for

fixing hardware's and drainage of water etc. After fixing

frame the gap between frame and adjacent finished wall

shall be filled with weather proof silicon sealent over backer

rod of required size and of approved quality, all complete as

per approved drawing & direction of Engineer-in-Charge.

(Single / double glass panes, wire mesh and silicon sealent

shall be paid separately). Variation in profile dimension in

higher side shall be accepted but no extra payment on this

account shall be made.

Note: For uPVC frame and sash extruded profiles minus 5%

tolerance in dimension i.e. in depth & width of profile shall

Two track two panels sliding window made of (small series)

frame 52 x 44 mm &sash 32 x 60 mm both having wall

thickness of 1.9 ± 0.2 mm and single glazing bead of

appropriate dimension. (Area of window upto 1.75 sqm)

Providing & fixing glass panes with putty and glazing clips in

23 10.30.1 steel doors, windows, clerestory windows, all complete with

4.0 mm thick glass panes Sqm 131.86 940.30 1,23,987.96

Providing & fixing fly proof wire gauze to windows, clerestory

24 10.29.1 windows & doors with M.S. Flat 15x3 mm and nuts & bolts

Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4

mm aperture on both sides

Providing and fixing factory made single extruded WPC

(Wood Polymer Composite) solid door/window/Ceosetory

windows & other Frames/Chowkhat comprising of virgin PVC

polymer of K value 58- 60 (Suspension Grade), calcium

carbonate and natural fibers (wood powder/ rice husk/wheat

husk) and non toxic additives (maximum toxicity index of 12

for 100 gms) fabricated with miter joints after applying PVC

solvent cement and screwed with full body threaded star

headed SS screws having minimum frame density of 750

kg/cum, screw withdrawal strength of 2200 N (Face) & 1100

N (Edge), minimum compressive strength of 58 N/mm2,

modulus of elasticity900 N/mm2 and resistance to spread of

flame of Class A category with property of being

termite/borer proof, water/moisture proof and fire retardant

and fixed in position with M.S hold fast/lugs/SS dash

fasteners of required dia and length complete as per

direction of Engineer-In- Charge. (M.S hold fast/lugs or SS

dash fasteners shall be paid for separately)

Note: For WPC solid door/window frames, minus 5mm

tolerance in dimensions i.e depth and width of profile shall

be acceptable. Variation in profile dimensions on plus side

shall be acceptable but no extra payment on this account

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Senior Girls' Hostel

Providing and fixing factory made single extruded WPC

(Wood Polymer Composite) solid plain flush door shutter of

required size comprising of virgin polymer of K value 58-60

(Suspension Grade), calcium carbonate and natural fibers

(wood powder/ rice husk/wheat husk) and non toxic

additives (maximum toxicity index of 12 for 100 gms)

having minimum density of 650 kg/cum and screw

withdrawal strength of 1800 N (Face) & 900 N (Edge),

27 26.87.2 minimum compressive strength 50 N/mm2, modulus of

elasticity 850 N/mm2 and resistance to spread of flame of

Class A category with property of being termite/ borer proof,

water/moisture proof and fire retardant and fixing with

stainless steel butt hinges of required size with necessary

full body threaded star headed counter sunk S.S screws, all

as per direction of Engineer-In- Charge. (Note: stainless

steel butt hinges and necessary S.S screws shall be paid

Providing and fixing Fiber Glass Reinforced plastic (FRP)

Door Frames of cross-section 90 mm x 45 mm having single

rebate of 32 mm x 15 mm to receive shutter of 30 mm

thickness. The laminate shall be moulded with fire resistant

28 9.121 grade unsaturated polyester resin and chopped mat. Door Rm 135.80 702.60 95,413.08

frame laminate shall be 2mm thick and shall be filled with

suitable wooden block in all the three legs. The frame shall

be covered with fiber glass from all sides. M.S. stay shall be

provided at the bottom to steady the frame

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled

door shutter of required colour and approved brand and

manufacture, made with fire - retardant grade unsaturated

polyester resin, moulded to 3 mm thick FRP laminate for

29 9.122.1 forming hollow rails and styles, with wooden frame and Sqm 44.10 3496.75 1,54,206.68

suitable blocks of seasoned wood inside at required places

for fixing of fittings, cast monolithically with 5 mm thick FRP

laminate for panels conforming to IS: 14856, including fixing

Providing and fixing stainless steel ( Grade 304) railing made

of Hollow tubes, channels, plates etc., including welding,

grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary

35 10.28 accessories & stainless steel dash fasteners , stainless steel Kg 420.00 612.25 2,57,145.00

bolts etc., of required size, on the top of the floor or the side

of waist slab with suitable arrangement as per approval of

Engineer-in charge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

Providing and fixing M.S. grills of required pattern in frames

of windows etc. with M.S. flats, square or round bars etc.

including priming coat with approved steel primer all

Fixed to openings /wooden frames with rawl plugs screws

E Repairs to Flooring

Dismantling tile work in floors and roofs laid in cement

mortar including stacking material within 50 metres lead.

Kota stone slabs 20 mm thick in risers of steps, skirting,

dado and pillars laid on 12 mm (average) thick cement

2 11.26.1 mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey Sqm 362.72 1706.60 6,19,013.69

cement slurry mixed with pigment to match the shade of the

slabs, including rubbing and polishing complete. (Ground

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Senior Girls' Hostel

Providing and laying 60mm thick faciory made cement

concrete interlocking paver block of M -30 grade made by

block making machine with strong vibratory compaction, of

3 16.68 approved size, design & shape, laid in required colour and

pattern over and including 50mm thick compacted bed of

coarse sand, filling the joints with line sand etc. all complete

as per the direction of Engineer-in-charge.

Paver Block in Courtyard

Providing and laying Polished Granite stone flooring in

required design and patterns, in linear as well as curvilinear

portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm

4 11.56.1 (average) thick base of cement mortar 1:4 (1 cement : 4

coarse sand) laid and jointed with cement slurry and

pointing with white cement slurry admixed with pigment of

matching shade including rubbing, curing and polishing etc.

all complete as specified and as directed by the Engineer-in-

Polished Granite stone slab colour of Black, Cherry/Ruby Red

SUB TOTAL 51,16,853.03

REPAIR OF EXISTING JUNIOR GIRLS' HOSTEL (GF)

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Junior Girls' Hostel

A Repairs to Roof

Providing and laying APP (Atactic Polypropylene Polymer)

modified prefabricated five layer, 5 mm thick water

proofing membrane, black finished reinforced with glass

fibre matt consisting of a coat of bitumen primer for

bitumen membrane @ 0.40 litre/sqm by the same

membrane manufactured ofdensity at 25° C, 0.87 - 0.89

kg/litre and viscocity 70 - 160 cps. Over the primer coat

the layer of membrane shall be laid using butane torch

and sealing all joints etc., and preparing the surface

1 MR complete. The vital physical and chemical parameters of Cum 511.06 877.60 4,48,508.45

the membrane shall be as under : Joint strength in

longitudinal and transverse direction at 23°C as 350/300

N/5 cm. Tear strength in longitudinal and transverse

direction as 60/80N. Softening point of membrane not

less than 150°C. Cold flexibility shall be upto -2°C when

tested in accordance with ASTM, D - 5147. The laying of

membrane shall be got done through the

authorisedapplicator of the manufacturer of membrane :

B Repairs to Toilets

Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as

1 8.31 approved by Engineer-in-Charge, in skirting, risers of Sqm 191.10 1063.45 2,03,225.30

steps and dados, over 12 mm thick bed of cement mortar

1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade

Providing and laying Ceramic glazed floor tiles of size

300x300 mm (thickness to be specified by the

manufacturer) of 1st quality conforming to IS : 15622 of

approved make in colours such as White, Ivory, Grey,

Fume Red Brown, laid on 20 mm thick cement mortar 1:4

(1 Cement : 4 Coarse sand), Jointing with grey cement

slurry @ 3.3 kg/sqm including pointing the joints with

white cement and matching pigment etc., complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water

supply, including all CPVC plain & brass threaded fittings,

1 including fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as

per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.3 25 mm nominal outer dia Pipes Rm 45 408.55 18,384.75

18.7.4 32 mm nominal outer dia Pipes Rm 27 500.95 13,525.65

18.7.5 40 mm nominal outer dia Pipes Rm 35 674.35 23,602.25

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water

supply, including all CPVC plain & brass threaded fittings,

i/c fixing the pipe with clamps at 1.00 m spacing. This

2 includes jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and

making good the same including testing of joints

complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making

18.8.2 20 mm nominal outer dia Pipes Rm 23 513.75 11,816.25

18.8.3 25 mm nominal outer dia Pipes Rm 23 626.50 14,409.50

Providing and fixing C.P. brass stop cock (concealed) of

3 standard design and of approved make conforming to

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Junior Girls' Hostel

Providing and fixing C.P. brass stop cock (concealed) of

4 standard design and of approved make conforming to

Providing and fixing C.P. brass long nose bib cock of

5 approved quality conforming to IS standards and

weighing not less than 810 gms.

6 Providing and fixing brass stop cock of approved quality :

20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel

of approved quality (screwed end) :

Providing and fixing C.P. Brass extension nipple (size

8 18.53A 15mmx50mm) of approved make and quality as per No 13 61.70 802.10

direction of Engineer-in-charge.

Providing and fixing PTMT grating of approved quality and

Supplying all materials,labour,T&P and fitting and fixing

U-PVC SWR soil waste ventilating pipes and fittings of the

following outside diameter conforming to ISI

No.13592/1992 to walls with nails,bobbins and wooden

10 plugs or laying in trenches including jointing with supply Rm 280 456.90 1,27,932.00

of approved rubber lubricant by non-heat application

method/as per manufacturer's

specification,testing,earthwork in excavation in all kinds

of soil and refilling of trenches as per specification and

direction of Engineer-in-charge

a OPWD 110mm dia U-PVC SWR Pipe (Supreme/Ashirvad)

b 110mm dia U-PVC Door Tee No 18 322.70 5,808.60

c 110mm dia U-PVC Plain Tee No 18 293.60 5,284.80

d 110mm dia U-PVC Door Bend No 18 232.00 4,176.00

e 110mm dia U-PVC Plain Band No 18 232.00 4,176.00

f 110mm dia U-PVC Plain Shoe Bend No 18 407.40 7,333.20

g 110mm dia U-PVC Offset without ear No 18 58.20 1,047.60

h 110mm dia U-PVC Cowl No 18 299.20 5,385.60

i 110mm dia U-PVC P-Trap No 18 497.30 8,951.40

j 75mm U-PVC SWR Pipes(Supreme/Ashirvad) Rm 20 225.10 4,502.00

k 75mm U-PVC Door Bend No 18 184.00 3,312.00

Providing and fixing water closet squatting pan (Indian

type W.C. pan ) with 100 mm sand cast Iron P or S trap,

10 litre low level white P.V.C. flushing cistern, including

11 flush pipe, with manually controlled device (handle lever)

conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls

and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size

580x440 mm with integral type foot rests

Providing and fixing white vitreous china flat back or wall

corner type lipped front urinal basin of 430x260x350 mm

and 340x410x265 mm sizes respectively with automatic

11 flushing cistern with standard flush pipe and C.P. brass

spreaders with brass unions and G.I clamps complete,

including painting of fittings and brackets, cutting and

making good the walls and floors wherever required :

One urinal basin with 5 litre white P.V.C. automatic

flushing cistern

Providing and fixing wash basin with C.I. brackets, 15

mm C.P. brass pillar taps, 32 mm C.P. brass waste of

12 standard pattern, including painting of fittings and

brackets, cutting and making good the walls wherever

White Vitreous China Wash basin size 630x450 mm with

a pair of 15 mm C.P. brass pillar taps

Providing and fixing 600x450 mm beveled edge mirror of

superior glass (of approved quality) complete with 6 mm

thick hard board ground fixed to wooden cleats with C.P.

brass screws and washers complete.

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Junior Girls' Hostel

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings This

includes jointing of pipes & fittings with one step CPVC

solvent cement, trenching, refilling & testing of joints

complete as per direction of Engineer in Charge.

18.9.3 25 mm nominal dia Pipes Rm 25 370.65 9,266.25

18.9.4 32 mm nominal dia Pipes Rm 15 435.05 6,525.75

18.9.5 40 mm nominal dia Pipes Rm 12 559.20 6,710.40

Constructing masonry Chamber 60x60x75 cm inside, in

brick work in cement mortar 1:4 (1 cement : 4 coarse

sand) for sluice valve, with C.I. surface box 100mm top

diameter, 160 mm bottom diameter and 180 mm deep (

inside) with chained lid and RCC top slab 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate

20mm nominal size ) , i/c necessary excavation,

foundation concrete 1:5:10 (1 cement : 5 fine sand : 10

graded stone aggregate 40 mm nominal size) and inside

plastering with cement mortar 1:3 (1 cement : 3 coarse

sand) 12 mm thick, finished with a floating coat of neat

cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of

class designation 7.

C Repair to Plaster and Plinth Protection

Dismantling old plaster or skirting raking out joints and

16 15.56 cleaning the surface for plaster including disposal of Sqm 34.00 45.05 1,531.70

rubbish to the dumping ground within 50 metres lead.

15 mm cement plaster on the rough side of single or half

brick wall of mix :

1:6 (1 cement: 6 fine sand)

12 mm cement plaster on the rough side of single or half

brick wall of mix :

Distempering with 1st quality acrylic distember (Ready

mix) having VOC content less than 50 grams/ litre of

approved brand and manufacture to give an even shade :

13.90.1 Old work (one or more coats)

Old work (one or more coats) Sqm 2089.89 56.80 1,18,705.78

Finishing walls with Acrylic Smooth exterior paint of

required shade :

Finishing with Epoxy paint (two or more coats) at all

locations prepared and applied as per manufacturer's

specifications including appropriate priming coat,

preparation of surface, etc. complete.

On steel work Sqm 65.93 201.70 13,298.08

22 13.50.3 Applying priming coat:

With ready mixed red oxide zinc chromate primer of

approved brand and manufacture on steel galvanised Sqm 65.93 55.50 3,659.12

iron/ steel works

6.44 +4.17 Repair for Plinth Protection Sqm 106.74 737.45 78,715.41

D Repairs to Internal Wiring and Fans/Light Fittings

Rewiring for light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FRLS PVC insulated copper

1 conductor single core cable and 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable as earth

wire in existing surface/ recessed steel/PVC conduit

including dismantling as required.

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Junior Girls' Hostel

Rewiring for twin control light point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable and 1.5

2 1.16 sq.mm FRLS PVC insulated copper conductor single core No 16 894.00 14,304.00

cable as earth wire in existing surface/ recessed

steel/PVC conduit including dismantling as required.

Wiring for circuit/ submain wiring alongwith earth wire

with the following sizes of FRLS PVC insulated copper

conductor, single core cable in surface/ recessed medium

class PVC conduit as required.

Supplying and drawing following sizes of FRLS PVC

4 insulated copper conductor, single core cable in the

existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class

PVC conduit along with accessories in surface/recess

including cutting the wall and making good the same in

case of recessed conduit as required.

Supplying and fixing metal box of following sizes (nominal

size) on surface or in recess with suitable size of phenolic

laminated sheet cover in front including painting etc. as

Supplying and fixing following piano type switch/ socket

7 on the existing switch box/ cover including connections

etc. as required.

7d 1.23.4 3 pin 5/6 A socket outlet No 10 69.00 690.00

8 1.23.6 Telephone socket outlet No 4 109.00 436.00

Supplying and fixing two module stepped type electronic

fan regulator on the existing modular plate switch box

including connections but excluding modular plate etc. as

Supplying and fixing 3 pin, 5 A ceiling rose on the

10 1.33 existing junction box/ wooden block including connections No 35 87.00 3,045.00

etc. as required.

Installation, testing and commissioning of ceiling fan,

including wiring the down rods of standard length (upto

30 cm) with 1.5 sq. mm FRLS PVC insulated, copper

conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening,

12 1.50.2 including making good the damage, connection, testing,

commissioning etc. as required.

Supplying and fixing following way, single pole and

neutral, sheet steel, MCB distribution board, 240 V, on

13 surface/ recess, complete with tinned copper bus bar,

neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator)

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia

including accessories, and providing masonry enclosure

14 5.2 with cover plate having locking arrangement and No 4 6855.00 27,420.00

watering pipe etc. with charcoal/ coke and salt as

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Junior Girls' Hostel

Supplying and laying 6 SWG G.I. wire at 0.50 meter

below ground level for conductor earth electrode,

including connection/ termination with GI thimble etc. as

Supplying and laying 25 mm X 5 mm copper strip at 0.50

meter below ground as strip earth electrode, including

16 5.8 connection/ terminating with nut, bolt, spring, washer Rm 40 972.00 38,880.00

etc. as required. (Jointing shall be done by overlapping

and with 2 sets of brass nut bolt & spring washer spaced

Erection of RCC/ PCC pole of following length in brick

ballast and ramming the foundation, finishing with 150

mm thick cement concrete (1:3:6) layer on top with

including excavation and refilling etc. as required.

18 Market Ceiling Fans Havell's type No 4 2500.00 10,000.00

E Repairs to Door/Windows

Dismantling doors, windows and clerestory windows

(steel or wood) shutter including chowkhats, architrave,

holdfasts etc. complete and stacking within 50 metres

Of area 3 sq. metres and below No 76 302.70 23,005.20

Providing and fixing factory made uPVC white colour

sliding glazed window upto 1.50 m in height dimension

comprising of uPVC multi-chambered frame with in-built

roller track and sash extruded profiles duly reinforced

with 1.60 ± 0.2 mm thick galvanized mild steel section

made from roll forming process of required length (shape

& size according to uPVC profile), appropriate dimension

of uPVC extruded glazing beads and uPVC extruded

interlocks, EPDM gasket, wool pile, zinc alloy (white

powder coated) touch locks with hook, zinc alloy body

with single nylon rollers (weight bearing capacity to be 40

kg), G.I fasteners 100 x 8 mm size for fixing frame to

finished wall and necessary stainless steel screws etc.

Profile of frame & sash shall be mitred cut and fusion

welded at all corners, including drilling of holes for fixing

hardware's and drainage of water etc. After fixing frame

the gap between frame and adjacent finished wall shall

be filled with weather proof silicon sealent over backer

rod of required size and of approved quality, all complete

as per approved drawing & direction of Engineer-in-

Charge. (Single / double glass panes, wire mesh and

silicon sealent shall be paid separately). Variation in

profile dimension in higher side shall be accepted but no

extra payment on this account shall be made.

Note: For uPVC frame and sash extruded profiles minus

5% tolerance in dimension i.e. in depth & width of profile

shall be acceptable.

Two track two panels sliding window made of (small

series) frame 52 x 44 mm &sash 32 x 60 mm both

having wall thickness of 1.9 ± 0.2 mm and single glazing Sqm 49.12 7634.10 3,74,986.99

bead of appropriate dimension. (Area of window upto

Providing & fixing glass panes with putty and glazing clips

23 10.30.1 in steel doors, windows, clerestory windows, all complete

4.0 mm thick glass panes Sqm 36.82 940.30 34,621.85

Providing & fixing fly proof wire gauze to windows,

24 10.29.1 clerestory windows & doors with M.S. Flat 15x3 mm and

nuts & bolts complete

Galvanised M.S. Wire gauze with 0.63 mm dia wire and

1.4 mm aperture on both sides

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Junior Girls' Hostel

Providing and fixing factory made single extruded WPC

(Wood Polymer Composite) solid door/window/Ceosetory

windows & other Frames/Chowkhat comprising of virgin

PVC polymer of K value 58- 60 (Suspension Grade),

calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) fabricated with miter

joints after applying PVC solvent cement and screwed

with full body threaded star headed SS screws having

minimum frame density of 750 kg/cum, screw withdrawal

strength of 2200 N (Face) & 1100 N (Edge), minimum

26 26.86.6 compressive strength of 58 N/mm2, modulus of

elasticity900 N/mm2 and resistance to spread of flame of

Class A category

with property of being termite/borer proof,

water/moisture proof and

fire retardant and fixed in position with M.S hold

fast/lugs/SS dash

fasteners of required dia and length complete as per

Engineer-In- Charge. (M.S hold fast/lugs or SS dash

fasteners shall

be paid for separately)

Note: For WPC solid door/window frames, minus 5mm

tolerance in dimensions i.e depth and width of profile

shall be acceptable. Variation in profile dimensions on

plus side shall be acceptable but no extra payment on

this account shall be made.

Providing and fixing factory made single extruded WPC

(Wood Polymer Composite) solid plain flush door shutter

of required size comprising of virgin polymer of K value

58-60 (Suspension Grade), calcium carbonate and

natural fibers (wood powder/ rice husk/wheat husk) and

non toxic additives (maximum toxicity index of 12 for 100

gms) having minimum density of 650 kg/cum and screw

withdrawal strength of 1800 N (Face) & 900 N (Edge),

27 26.87.2 minimum compressive strength 50 N/mm2, modulus of

elasticity 850 N/mm2 and resistance to spread of flame

of Class A category with property of being termite/ borer

proof, water/moisture proof and fire retardant and fixing

with stainless steel butt hinges of required size with

necessary full body threaded star headed counter sunk

S.S screws, all as per direction of Engineer-In- Charge.

(Note: stainless steel butt hinges and necessary S.S

screws shall be paid separately)

Providing and fixing Fiber Glass Reinforced plastic (FRP)

Door Frames of cross-section 90 mm x 45 mm having

single rebate of 32 mm x 15 mm to receive shutter of 30

mm thickness. The laminate shall be moulded with fire

resistant grade unsaturated polyester resin and chopped

mat. Door frame laminate shall be 2mm thick and shall

be filled with suitable wooden block in all the three legs.

The frame shall be covered with fiber glass from all sides.

M.S. stay shall be provided at the bottom to steady the

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled

door shutter of required colour and approved brand and

manufacture, made with fire - retardant grade

unsaturated polyester resin, moulded to 3 mm thick FRP

29 9.122.1 laminate for forming hollow rails and styles, with wooden Sqm 44.10 3496.75 1,54,206.68

frame and suitable blocks of seasoned wood inside at

required places for fixing of fittings, cast monolithically

with 5 mm thick FRP laminate for panels conforming to

IS: 14856, including fixing to frames

Sl No DSR Code Item Unit Quantity Rate Amount

Repair Work at Junior Girls' Hostel

Providing and fixing stainless steel ( Grade 304) railing

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c

fixing the railing with necessary accessories & stainless

steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of

Engineer-in charge, (for payment purpose only weight

of stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing M.S. grills of required pattern in

frames of windows etc. with M.S. flats, square or round

bars etc. including priming coat with approved steel

primer all complete.

Fixed to openings /wooden frames with rawl plugs screws

F Repairs to Flooring

Dismantling tile work in floors and roofs laid in cement

mortar including stacking material within 50 metres lead.

Kota stone slabs 20 mm thick in risers of steps, skirting,

dado and pillars laid on 12 mm (average) thick cement

2 11.26.1 mortar 1:3 (1 cement: 3 coarse sand) and jointed with Sqm 362.72 1706.60 6,19,013.69

grey cement slurry mixed with pigment to match the

shade of the slabs, including rubbing and polishing

complete. (Ground Floor)

Providing and laying 60mm thick faciory made cement

concrete interlocking paver block of M -30 grade made by

block making machine with strong vibratory compaction,

3 16.68 of approved size, design & shape, laid in required colour Sqm 205.87 951.00 1,95,777.71

and pattern over and including 50mm thick compacted

bed of coarse sand, filling the joints with line sand etc. all

complete as per the direction of Engineer-in-charge.

Providing and laying Polished Granite stone flooring in

required design and patterns, in linear as well as

curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over

20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with cement

slurry and pointing with white cement slurry admixed

with pigment of matching shade including rubbing, curing

and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby

Red or equivalent

SUB TOTAL 45,85,373.33

REPAIR OF EXISTING KITCHEN & DINING

Sl No DSR Code Item Unit Quantity Rate Amount

Repair of Kitchen & Dining

A Repairs to Roof

Providing and laying APP (Atactic Polypropylene Polymer)

modified prefabricated five layer, 5 mm thick water

proofing membrane, black finished reinforced with glass

fibre matt consisting of a coat of bitumen primer for

bitumen membrane @ 0.40 litre/sqm by the same

membrane manufactured ofdensity at 25 ° C, 0.87 - 0.89

kg/litre and viscocity 70 - 160 cps. Over the primer coat

the layer of membrane shall be laid using butane torch

and sealing all joints etc., and preparing the surface

1 MR complete. The vital physical and chemical parameters of Sqm 692.02 877.60 6,07,316.75

the membrane shall be as under : Joint strength in

longitudinal and transverse direction at 23 ° C as 350/300

N/5 cm. Tear strength in longitudinal and transverse

direction as 60/80N. Softening point of membrane not less

than 150°C. Cold flexibility shall be upto -2°C when tested

in accordance with ASTM, D - 5147. The laying of

membrane shall be got done through the

authorisedapplicator of the manufacturer of membrane : 5

B Repairs to Toilets

Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as

1 8.31 approved by Engineer-in-Charge, in skirting, risers of Sqm 126.15 1063.45 1,34,148.90

steps and dados, over 12 mm thick bed of cement mortar

1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade

Providing and laying Ceramic glazed floor tiles of size

300x300 mm (thickness to be specified by the

manufacturer) of 1st quality conforming to IS : 15622 of

approved make in colours such as White, Ivory, Grey,

Fume Red Brown, laid on 20 mm thick cement mortar 1:4

(1 Cement : 4 Coarse sand), Jointing with grey cement

slurry @ 3.3 kg/sqm including pointing the joints with

white cement and matching pigment etc., complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

3 fixing the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step CPVC

solvent cement and testing of joints complete as per

direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.3 25 mm nominal outer dia Pipes Rm 40 408.55 16,342.00

18.7.4 32 mm nominal outer dia Pipes Rm 22 500.95 11,020.90

18.7.5 40 mm nominal outer dia Pipes Rm 29 674.35 19,556.15

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes

4 jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good

the same including testing of joints complete as per

direction of Engineer in Charge. Concealed work, including

cutting chases and making good the walls

18.8.2 20 mm nominal outer dia Pipes Rm 18 513.75 9,247.50

18.8.3 25 mm nominal outer dia Pipes Rm 16 626.50 10,024.00

Providing and fixing C.P. brass stop cock (concealed) of

5 standard design and of approved make conforming to

15 mm nominal bore

Sl No DSR Code Item Unit Quantity Rate Amount

Repair of Kitchen & Dining

Providing and fixing C.P. brass stop cock (concealed) of

6 standard design and of approved make conforming to

18.52.1 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of

7 approved quality conforming to IS standards and weighing

not less than 810 gms.

8 Providing and fixing brass stop cock of approved quality :

Providing and fixing gun metal gate valve with C.I. wheel

of approved quality (screwed end) :

Providing and fixing C.P. Brass extension nipple (size

10 15mmx50mm) of approved make and quality as per

direction of Engineer-in-charge.

Providing and fixing PTMT grating of approved quality and

Supplying all materials,labour,T&P and fitting and fixing U-

PVC SWR soil waste ventilating pipes and fittings of the

following outside diameter conforming to ISI

No.13592/1992 to walls with nails,bobbins and wooden

12 plugs or laying in trenches including jointing with supply of

approved rubber lubricant by non-heat application

method/as per manufacturer's

specification,testing,earthwork in excavation in all kinds of

soil and refilling of trenches as per specification and

a OPWD direction

110mm dia of Engineer-in-charge

U-PVC SWR Pipe (Supreme/Ashirvad) Rm 280 456.90 1,27,932.00

b 110mm dia U-PVC Door Tee No 4 322.70 1,290.80

c 110mm dia U-PVC Plain Tee No 4 293.60 1,174.40

d 110mm dia U-PVC Door Bend No 4 232.00 928.00

e 110mm dia U-PVC Plain Band No 4 232.00 928.00

f 110mm dia U-PVC Plain Shoe Bend No 4 407.40 1,629.60

g 110mm dia U-PVC Offset without ear No 4 58.20 232.80

h 110mm dia U-PVC Cowl No 4 299.20 1,196.80

i 110mm dia U-PVC P-Trap No 4 497.30 1,989.20

j 75mm U-PVC SWR Pipes(Supreme/Ashirvad) Rm 10 225.10 2,251.00

k 75mm U-PVC Door Bend No 4 184.00 736.00

Providing and fixing water closet squatting pan (Indian

type W.C. pan ) with 100 mm sand cast Iron P or S trap,

10 litre low level white P.V.C. flushing cistern, including

13 flush pipe, with manually controlled device (handle lever)

conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and

floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size

580x440 mm with integral type foot rests

Providing and fixing white vitreous china flat back or wall

corner type lipped front urinal basin of 430x260x350 mm

and 340x410x265 mm sizes respectively with automatic

14 flushing cistern with standard flush pipe and C.P. brass

spreaders with brass unions and G.I clamps complete,

including painting of fittings and brackets, cutting and

making good the walls and floors wherever required :

One urinal basin with 5 litre white P.V.C. automatic

flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm

C.P. brass pillar taps, 32 mm C.P. brass waste of standard

pattern, including painting of fittings and brackets, cutting

and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a

pair of 15 mm C.P. brass pillar taps

Providing and fixing 600x450 mm beveled edge mirror of

superior glass (of approved quality) complete with 6 mm

thick hard board ground fixed to wooden cleats with C.P.

brass screws and washers complete.

Sl No DSR Code Item Unit Quantity Rate Amount

Repair of Kitchen & Dining

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings This

includes jointing of pipes & fittings with one step CPVC

solvent cement, trenching, refilling & testing of joints

complete as per direction of Engineer in Charge.

18.9.3 25 mm nominal dia Pipes Rm 12 370.65 4,447.80

18.9.4 32 mm nominal dia Pipes Rm 7 435.05 3,045.35

18.9.5 40 mm nominal dia Pipes Rm 6 559.20 3,355.20

Constructing masonry Chamber 60x60x75 cm inside, in

brick work in cement mortar 1:4 (1 cement : 4 coarse

sand) for sluice valve, with C.I. surface box 100mm top

diameter, 160 mm bottom diameter and 180 mm deep (

inside) with chained lid and RCC top slab 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20mm

nominal size ) , i/c necessary excavation, foundation

concrete 1:5:10 (1 cement : 5 fine sand : 10 graded

stone aggregate 40 mm nominal size) and inside

plastering with cement mortar 1:3 (1 cement : 3 coarse

sand) 12 mm thick, finished with a floating coat of neat

cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of

class designation 7.

C Repair to Plaster and Plinth Protection

Dismantling old plaster or skirting raking out joints and

1 15.56 cleaning the surface for plaster including disposal of Sqm 25.00 45.05 1,126.25

rubbish to the dumping ground within 50 metres lead.

15 mm cement plaster on the rough side of single or half

brick wall of mix :

1:6 (1 cement: 6 fine sand)

As per actual measurement Sqm 25.00 324.30 8,107.50

Distempering with 1st quality acrylic distember (Ready

mix) having VOC content less than 50 grams/ litre of

approved brand and manufacture to give an even shade :

13.90.1 Old work (one or more coats)

Finishing walls with Acrylic Smooth exterior paint of

required shade :

Finishing with Epoxy paint (two or more coats) at all

locations prepared and applied as per manufacturer's

specifications including appropriate priming coat,

preparation of surface, etc. complete.

On steel work Sqm 101.13 201.70 20,397.92

6 Applying priming coat:

With ready mixed red oxide zinc chromate primer of

13.50.3 approved brand and manufacture on steel galvanised iron/ Sqm 101.13 55.50 5,612.72

6.44 +4.17 Repair for Plinth Protection Sqm 123.35 737.45 90,964.46

D Repairs to Internal Wiring and Fans/Light Fittings

Rewiring for light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FRLS PVC insulated copper

1 conductor single core cable and 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable as earth wire

in existing surface/ recessed steel/PVC conduit including

dismantling as required.

Rewiring for twin control light point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable and 1.5

2 1.16 sq.mm FRLS PVC insulated copper conductor single core No 20 894.00 17,880.00

cable as earth wire in existing surface/ recessed steel/PVC

conduit including dismantling as required.

Wiring for circuit/ submain wiring alongwith earth wire

3 with the following sizes of FRLS PVC insulated copper

conductor, single core cable in surface/ recessed medium

class PVC conduit as required.

Sl No DSR Code Item Unit Quantity Rate Amount

Repair of Kitchen & Dining

Supplying and drawing following sizes of FRLS PVC

4 insulated copper conductor, single core cable in the

existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class

PVC conduit along with accessories in surface/recess

including cutting the wall and making good the same in

case of recessed conduit as required.

Supplying and fixing metal box of following sizes (nominal

6 size) on surface or in recess with suitable size of phenolic

laminated sheet cover in front including painting etc. as

Supplying and fixing following piano type switch/ socket

7 on the existing switch box/ cover including connections

etc. as required.

7d 1.23.4 3 pin 5/6 A socket outlet No 15 69.00 1,035.00

8 1.23.6 Telephone socket outlet No 1 109.00 109.00

Supplying and fixing two module stepped type electronic

9 1.25 fan regulator on the existing modular plate switch box No 30 369.00 11,070.00

including connections but excluding modular plate etc. as

Supplying and fixing 3 pin, 5 A ceiling rose on the existing

10 1.33 junction box/ wooden block including connections etc. as No 30 87.00 2,610.00

Installation, testing and commissioning of ceiling fan,

including wiring the down rods of standard length (upto 30

cm) with 1.5 sq. mm FRLS PVC insulated, copper

conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening,

12 1.50.2 including making good the damage, connection, testing, No 10 643.00 6,430.00

commissioning etc. as required.

Supplying and fixing following way, single pole and

neutral, sheet steel, MCB distribution board, 240 V, on

13 surface/ recess, complete with tinned copper bus bar,

neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator)

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia

including accessories, and providing masonry enclosure

with cover plate having locking arrangement and watering

pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 meter below

15 5.7 ground level for conductor earth electrode, including Rm 10 51.00 510.00

connection/ termination with GI thimble etc. as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50

meter below ground as strip earth electrode, including

16 5.8 connection/ terminating with nut, bolt, spring, washer etc. Rm 30 972.00 29,160.00

as required. (Jointing shall be done by overlapping and

with 2 sets of brass nut bolt & spring washer spaced at 50

Sl No DSR Code Item Unit Quantity Rate Amount

Repair of Kitchen & Dining

Erection of RCC/ PCC pole of following length in brick

ballast and ramming the foundation, finishing with 150

mm thick cement concrete (1:3:6) layer on top with

including excavation and refilling etc. as required.

18 Market Ceiling Fans Havell's type No 4 2500.00 10,000.00

E Repairs to Door/Windows

Dismantling doors, windows and clerestory windows (steel

1 15.12.1 or wood) shutter including chowkhats, architrave,

holdfasts etc. complete and stacking within 50 metres lead

Of area 3 sq. metres and below No 25 302.70 7,567.50

Providing and fixing factory made uPVC white colour

sliding glazed window upto 1.50 m in height dimension

comprising of uPVC multi-chambered frame with in-built

roller track and sash extruded profiles duly reinforced with

1.60 ± 0.2 mm thick galvanized mild steel section made

from roll forming process of required length (shape & size

according to uPVC profile), appropriate dimension of uPVC

extruded glazing beads and uPVC extruded interlocks,

EPDM gasket, wool pile, zinc alloy (white powder coated)

touch locks with hook, zinc alloy body with single nylon

rollers (weight bearing capacity to be 40 kg), G.I fasteners

100 x 8 mm size for fixing frame to finished wall and

necessary stainless steel screws etc. Profile of frame &

sash shall be mitred cut and fusion welded at all corners,

including drilling of holes for fixing hardware's and

drainage of water etc. After fixing frame the gap between

frame and adjacent finished wall shall be filled with

weather proof silicon sealent over backer rod of required

size and of approved quality, all complete as per approved

drawing & direction of Engineer-in-Charge. (Single /

double glass panes, wire mesh and silicon sealent shall be

paid separately). Variation in profile dimension in higher

side shall be accepted but no extra payment on this

account shall be made.

Note: For uPVC frame and sash extruded profiles minus

5% tolerance in dimension i.e. in depth & width of profile

shall be acceptable.

Two track two panels sliding window made of (small

series) frame 52 x 44 mm &sash 32 x 60 mm both having

wall thickness of 1.9 ± 0.2 mm and single glazing bead of

appropriate dimension. (Area of window upto 1.75 sqm)

Providing & fixing glass panes with putty and glazing clips

3 10.30.1 in steel doors, windows, clerestory windows, all complete

4.0 mm thick glass panes Sqm 32.03 940.30 30,113.11

Providing and fixing factory made single extruded WPC

(Wood Polymer Composite) solid door/window/Ceosetory

windows & other Frames/Chowkhat comprising of virgin

PVC polymer of K value 58- 60 (Suspension Grade),

calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) fabricated with miter

joints after applying PVC solvent cement and screwed with

full body threaded star headed SS screws having minimum

4 26.86.6 frame density of 750 kg/cum, screw withdrawal strength

of 2200 N (Face) & 1100 N (Edge), minimum compressive

strength of 58 N/mm2, modulus of elasticity900 N/mm2

and resistance to spread of flame of Class A category with

property of being termite/borer proof, water/moisture

proof and fire retardant and fixed in position with M.S hold

fast/lugs/SS dash fasteners of required dia and length

complete as per direction of Engineer-In- Charge. (M.S

hold fast/lugs or SS dash fasteners shall be paid for

Sl No DSR Code Item Unit Quantity Rate Amount

Repair of Kitchen & Dining

Note: For WPC solid door/window frames, minus 5mm

tolerance in dimensions i.e depth and width of profile shall

be acceptable. Variation in profile dimensions on plus side

shall be acceptable but no extra payment on this account

Providing and fixing factory made single extruded WPC

(Wood Polymer Composite) solid plain flush door shutter

of required size comprising of virgin polymer of K value

58-60 (Suspension Grade), calcium carbonate and natural

fibers (wood powder/ rice husk/wheat husk) and non toxic

additives (maximum toxicity index of 12 for 100 gms)

having minimum density of 650 kg/cum and screw

withdrawal strength of 1800 N (Face) & 900 N (Edge),

5 26.87.2 minimum compressive strength 50 N/mm2, modulus of

elasticity 850 N/mm2 and resistance to spread of flame of

Class A category with property of being termite/ borer

proof, water/moisture proof and fire retardant and fixing

with stainless steel butt hinges of required size with

necessary full body threaded star headed counter sunk

S.S screws, all as per direction of Engineer-In- Charge.

(Note: stainless steel butt hinges and necessary S.S

screws shall be paid separately)

Providing and fixing Fiber Glass Reinforced plastic (FRP)

Door Frames of cross-section 90 mm x 45 mm having

single rebate of 32 mm x 15 mm to receive shutter of 30

mm thickness. The laminate shall be moulded with fire

6 9.121 resistant grade unsaturated polyester resin and chopped Rm 22.20 702.60 15,597.72

mat. Door frame laminate shall be 2mm thick and shall be

filled with suitable wooden block in all the three legs. The

frame shall be covered with fiber glass from all sides. M.S.

stay shall be provided at the bottom to steady the frame

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled

door shutter of required colour and approved brand and

manufacture, made with fire - retardant grade

unsaturated polyester resin, moulded to 3 mm thick FRP

7 9.122.1 laminate for forming hollow rails and styles, with wooden Sqm 7.20 3496.75 25,176.60

frame and suitable blocks of seasoned wood inside at

required places for fixing of fittings, cast monolithically

with 5 mm thick FRP laminate for panels conforming to IS:

14856, including fixing to frames

Providing and fixing M.S. grills of required pattern in

8 10.29 frames of windows etc. with M.S. flats, square or round

bars etc. including priming coat with approved steel

primer all complete.

Fixed to openings /wooden frames with rawl plugs screws

F Repairs to Flooring

Dismantling tile work in floors and roofs laid in cement

mortar including stacking material within 50 metres lead.

Kota stone slabs 20 mm thick in risers of steps, skirting,

dado and pillars laid on 12 mm (average) thick cement

2 11.26.1 mortar 1:3 (1 cement: 3 coarse sand) and jointed with Sqm 628.64 0.00 -

grey cement slurry mixed with pigment to match the

shade of the slabs, including rubbing and polishing

complete. (Ground Floor)

Sl No DSR Code Item Unit Quantity Rate Amount

Repair of Kitchen & Dining

Providing and laying Polished Granite stone flooring in

required design and patterns, in linear as well as

curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over

20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with cement

slurry and pointing with white cement slurry admixed with

pigment of matching shade including rubbing, curing and

polishing etc. all complete as specified and as directed by

the Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby

Red or equivalent

SUB TOTAL 28,78,218.46

ADDITIONAL ROOMS FOR PRINCIPAL'S QUARTERS

Sl No DSR Code Item Unit Quantity Rate Amount

ADDITIONAL ROOMS FOR PRINCIPAL'S QUARTERS

A Repair to Plaster and Plinth Protection

15 mm cement plaster on the rough side of single or half brick wall of

12 mm cement plaster on the rough side of single or half brick wall of

1:6 (1 cement: 6 fine sand)

Distempering with 1st quality acrylic distember (Ready mix) having

3 13.41.1 VOC content less than 50 grams/ litre of approved brand and Sqm 119.58 162.55 19,437.73

manufacture to give an even shade : New work (one or more coats)

4 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : Sqm 59.86 166.85 9,987.22

Finishing with Epoxy paint (two or more coats) at all locations

5 13.52.1 prepared and applied as per manufacturer's specifications including

appropriate priming coat, preparation of surface, etc. complete.

On steel work Sqm 8.10 201.70 1,633.77

6 13.50.3 Applying priming coat:

With ready mixed red oxide zinc chromate primer of approved brand

and manufacture on steel galvanised iron/ steel works

7 6.44 +4.17 Repair for Plinth Protection Sqm 41.51 737.45 30,611.55

B Repairs to Internal Wiring and Fans/Light Fittings

Rewiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

1 cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable as earth wire in existing surface/ recessed steel/PVC conduit

including dismantling as required.

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC

2 1.11 insulated copper conductor single core cable as earth wire in existing No 2.00 1562.00 3,124.00

surface/ recessed steel/PVC conduit including dismantling as

Supplying and fixing following piano type switch/ socket on the

existing switch box/ cover including connections etc. as required.

1.24.4 3 pin 5/6 A socket outlet No 8.00 122.00 976.00

1.24.5 Telephone socket outlet No 4.00 197.00 788.00

Supplying and fixing two module stepped type electronic fan regulator

3 1.25 on the existing modular plate switch box including connections but No 2.00 369.00 738.00

excluding modular plate etc. as required.

Supplying and fixing metal box of following sizes (nominal size) on

4 surface or in recess with suitable size of phenolic laminated sheet

cover in front including painting etc. as required.

Supplying and fixing metal box of following sizes (nominal size) on

5 surface or in recess with suitable size of phenolic laminated sheet

cover in front including painting etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction

box/ wooden block including connections etc. as required.

Sl No DSR Code Item Unit Quantity Rate Amount

ADDITIONAL ROOMS FOR PRINCIPAL'S QUARTERS

Installation, testing and commissioning of ceiling fan, including wiring

7 1.44 the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS No 2.00 213.00 426.00

PVC insulated, copper conductor, single core cable etc. as required.

8 Market Ceiling Fans Havell's type No 2.00 2500.00 5,000.00

Supplying and fixing following way, single pole and neutral, sheet

steel, MCB distribution board, 240 V, on surface/ recess, complete

9 with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

C Repairs to Door/Windows

Providing and fixing factory made uPVC white colour sliding glazed

window upto 1.50 m in height dimension comprising of uPVC multi-

chambered frame with in-built roller track and sash extruded profiles

duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section

made from roll forming process of required length (shape & size

according to uPVC profile), appropriate dimension of uPVC extruded

glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile,

zinc alloy (white powder coated) touch locks with hook, zinc alloy

body with single nylon rollers (weight bearing capacity to be 40 kg),

G.I fasteners 100 x 8 mm size for fixing frame to finished wall and

necessary stainless steel screws etc. Profile of frame & sash shall be

mitred cut and fusion welded at all corners, including drilling of holes

for fixing hardware's and drainage of water etc. After fixing frame the

gap between frame and adjacent finished wall shall be filled with

weather proof silicon sealent over backer rod of required size and of

approved quality, all complete as per approved drawing & direction of

Engineer-in-Charge. (Single / double glass panes, wire mesh and

silicon sealent shall be paid separately). Variation in profile dimension

in higher side shall be accepted but no extra payment on this account

Note: For uPVC frame and sash extruded profiles minus 5% tolerance

in dimension i.e. in depth & width of profile shall be acceptable.

Two track two panels sliding window made of (small series) frame 52

x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm

and single glazing bead of appropriate dimension. (Area of window

Providing & fixing glass panes with putty and glazing clips in steel

doors, windows, clerestory windows, all complete with :

4.0 mm thick glass panes

Providing & fixing fly proof wire gauze to windows, clerestory

windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete

Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm

aperture on both sides

Providing and fixing factory made single extruded WPC (Wood

Polymer Composite) solid door/window/Ceosetory windows & other

Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60

(Suspension Grade), calcium carbonate and natural fibers (wood

powder/ rice husk/wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) fabricated with miter joints after

applying PVC solvent cement and screwed with full body threaded star

headed SS screws having minimum frame density of 750 kg/cum,

screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),

minimum compressive strength of 58 N/mm2, modulus of

elasticity900 N/mm2 and resistance to spread of flame of Class A

category with property of being termite/borer proof, water/moisture

proof and fire retardant and fixed in position with M.S hold

fast/lugs/SS dash fasteners of required dia and length complete as per

direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash

fasteners shall be paid for separately)

Sl No DSR Code Item Unit Quantity Rate Amount

ADDITIONAL ROOMS FOR PRINCIPAL'S QUARTERS

Note: For WPC solid door/window frames, minus 5mm tolerance in

dimensions i.e depth and width of profile shall be acceptable. Variation

in profile dimensions on plus side shall be acceptable but no extra

payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood

Polymer Composite) solid plain flush door shutter of required size

comprising of virgin polymer of K value 58-60 (Suspension Grade),

calcium carbonate and natural fibers (wood powder/ rice husk/wheat

husk) and non toxic additives (maximum toxicity index of 12 for 100

gms) having minimum density of 650 kg/cum and screw withdrawal

strength of 1800 N (Face) & 900 N (Edge), minimum compressive

strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance

to spread of flame of Class A category with property of being termite/

borer proof, water/moisture proof and fire retardant and fixing with

stainless steel butt hinges of required size with necessary full body

threaded star headed counter sunk S.S screws, all as per direction of

Engineer-In- Charge. (Note: stainless steel butt hinges and necessary

S.S screws shall be paid separately)

Providing and fixing M.S. grills of required pattern in frames of

6 10.29 windows etc. with M.S. flats, square or round bars etc. including

priming coat with approved steel primer all complete.

Fixed to openings /wooden frames with rawl plugs screws etc Kg 121.50 99.70 12,113.55

D Repairs to Flooring

Providing and laying Vitrified tiles in floor in different sizes (thickness

to be specified by the manufacturer) with water absorption less than

0.08% and conforming to IS:15622, of approved brand &

manufacturer, in all colours and shade, laid on 20 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry

@3.3 kg/sqm including grouting the joints with white cement and

matching pigments etc. The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required thickness, leveling system and

rubber mallet for placing the tiles gently and easily.

Providing and laying in position cement concrete of specified grade

2 4.1.2 excluding the cost of centering and shuttering - All work up to plinth

1:1 ½ :3 (1 Cement: 1 ½ coarse sand (zone-III) derived from natural

sources : 3 graded stone aggregate 20 mm nominal size derived from Cum 1.40 7783.65 10,906.35

natural sources)

SUB TOTAL 3,40,762.27

DEVELOPMENT & EXTERNAL SERVICES

Sl No DSR Code Item Unit Quantity Rate Amount

Septic Tank 4 Nos

Septic Tank 8.9 x 2.7

Earth work in excavation by mechanical means (Hydraulic

excavator)/ manual means over areas (exceeding 30 cm in

1 76.50 depth, 1.5 m in width as well as 10 sqm on plan) including Cum 76.50 205.45 15,716.93

getting out and disposal of excavated earth lead upto 50 m

and lift upto 1.5 m, as directed by Engineer-in charge

Supplying and filling in plinth with sand under floors,

2 5.74 including watering, ramming, consolidating and dressing Cum 5.74 2161.20 12,399.89

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from

3 5.74 natural sources : 6 graded stone aggregate 40 mm nominal Cum 5.74 6670.25 38,270.56

size derived from natural sources)

Providing and laying in position specified grade of

reinforced cement concrete, excluding the cost of

centering, shuttering, finishing and reinforcement - All work

up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from

natural sources : 3 graded stone aggregate 20 mm nominal Cum 23.06 7783.65 1,79,490.97

size de rived from natural sources)

Centering and shuttering including strutting, propping etc.

and removal of form for

Foundations, footings, bases of columns, etc. for mass

Steel reinforcement for R.C.C. work including straightening,

6 5.22.6 cutting, bending, placing in position and binding all

complete upto plinth level 5.22.6

Thermo-Mechanically Treated bars of grade Fe-500D or

7 2 N0 Manhole & Fittings LS 2.00 10000.00 20,000.00

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x

45 cm dry brick honey comb shaft with bricks and S.W.

drain pipe 100 mm diameter, 1.8 m long complete as per

standard design.

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

Septic Tank 5.7 x 2.1 (3 nos.)

Earth work in excavation by mechanical means (Hydraulic

excavator)/ manual means over areas (exceeding 30 cm in

1 2.6.1 depth, 1.5 m in width as well as 10 sqm on plan) including Cum 147.00 205.45 30,201.15

getting out and disposal of excavated earth lead upto 50 m

and lift upto 1.5 m, as directed by Engineer-in charge

Supplying and filling in plinth with sand under floors,

2 2.27 including watering, ramming, consolidating and dressing Cum 11.03 2161.20 23,827.23

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from

3 4.1.6 natural sources : 6 graded stone aggregate 40 mm nominal Cum 11.03 6670.25 73,539.51

size derived from natural sources)

Providing and laying in position specified grade of

reinforced cement concrete, excluding the cost of

centering, shuttering, finishing and reinforcement - All work

up to plinth level :

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Septic Tank 4 Nos

Septic Tank 8.9 x 2.7

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from

natural sources : 3 graded stone aggregate 20 mm nominal Cum 37.78 7783.65 2,94,081.86

size de rived from natural sources)

Centering and shuttering including strutting, propping etc.

and removal of form for

Foundations, footings, bases of columns, etc. for mass

Steel reinforcement for R.C.C. work including straightening,

6 5.22.6 cutting, bending, placing in position and binding all 0.00

complete upto plinth level 5.22.6

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 (

1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3

mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone

aggregate 20 mm nominal size), foundation concrete 1:4:8

mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone

aggregate 40 mm nominal size), inside plastering 12 mm

thick with cement mortar 1:3 (1 cement : 3 coarse sand)

finished with floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size)

finished with a floating coat of neat cement complete as per

standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover

with frame (light duty) 455x610 mm internal dimensions,

total weight of cover and frame to be not less than 38 kg

(weight of cover 23 kg and weight of frame 15 kg) :

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x

45 cm dry brick honey comb shaft with bricks and S.W.

drain pipe 100 mm diameter, 1.8 m long complete as per

standard design.

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

DSR-2021 Repairs to Concrete Roads & Drain

Earth work in excavation by mechanical means (Hydraulic

excavator)/ manual means over areas (exceeding 30 cm in

1 2.6.1 depth, 1.5 m in width as well as 10 sqm on plan) including Cum 491.40 205.45 1,00,958.13

getting out and disposal of excavated earth lead upto 50 m

and lift upto 1.5 m, as directed by Engineer-in charge

Supplying and filling in plinth with sand under floors,

2 2.27 including watering, ramming, consolidating and dressing Cum 75.60 2161.20 1,63,386.72

1:5:10 (1 Cement : 5 coarse sand (zone-III) derived from

3 4.1.10 natural sources : 10 graded stone aggregate 40 mm Cum 75.60 6050.65 4,57,429.14

nominal size derived from natural sources)

Providing and laying in position specified grade of

reinforced cement concrete, excluding the cost of

centering, shuttering, finishing and reinforcement - All work

up to plinth level :

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Septic Tank 4 Nos

Septic Tank 8.9 x 2.7

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from

natural sources : 3 graded stone aggregate 20 mm nominal Cum 132.30 8364.20 11,06,583.66

size de rived from natural sources)

Centering and shuttering including strutting, propping etc.

and removal of form for

Foundations, footings, bases of columns, etc. for mass

Steel reinforcement for R.C.C. work including straightening,

6 5.22.6 cutting, bending, placing in position and binding all -

complete upto plinth level 5.22.6

Thermo-Mechanically Treated bars of grade Fe-500D or

Providing and laying in position cement concrete of

7 4.1.2 specified grade excluding the cost of centering and -

shuttering - All work up to plinth level

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from

natural sources : 3 graded stone aggregate 20 mm nominal Cum 0.00 7783.65 -

size derived from natural sources)

A DSR-2021 Repairs to Walls

Earth work in excavation by mechanical means (Hydraulic

excavator)/ manual means over areas (exceeding 30 cm in

1 2.6.1 depth, 1.5 m in width as well as 10 sqm on plan) including Cum 24.79 205.45 5,092.28

getting out and disposal of excavated earth lead upto 50 m

and lift upto 1.5 m, as directed by Engineer-in charge

Supplying and filling in plinth with sand under floors,

2 2.27 including watering, ramming, consolidating and dressing Cum 4.13 2161.20 8,927.92

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from

3 4.1.6 natural sources : 6 graded stone aggregate 40 mm nominal Cum 4.13 6670.25 27,554.80

size derived from natural sources)

Providing and laying in position cement concrete of

4 4.1.2 specified grade excluding the cost of centering and Cum 7.75 7783.65 60,323.29

shuttering - All work up to plinth level

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from

natural sources : 3 graded stone aggregate 20 mm nominal

size derived from natural sources)

Providing and laying in position specified grade of

reinforced cement concrete, excluding the cost of

centering, shuttering, finishing and reinforcement - All work

up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from

natural sources : 3 graded stone aggregate 20 mm nominal

size de rived from natural sources)

Reinforced cement concrete work in walls (any thickness),

including attached pilasters, buttresses, plinth and string

courses, fillets, columns, pillars, piers, abutments, posts

and struts etc. above plinth level up to floor five level,

excluding cost of centering, shuttering, finishing and

reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from

natu ral sources : 3 graded stone aggregate 20 mm

nominal size derived from natural sources

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Septic Tank 4 Nos

Septic Tank 8.9 x 2.7

Centering and shuttering including strutting, propping etc.

and removal of form for

Foundations, footings, bases of columns, etc. for mass

Centering and shuttering including strutting, propping etc.

and removal of form for

Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening,

8 5.22.6 cutting, bending, placing in position and binding all Kg 1079.00 89.65 96,732.35

complete upto plinth level 5.22.6

Thermo-Mechanically Treated bars of grade Fe-500D or

Brick work with non modular fly ash bricks conforming to

IS:12894, class designation 10 average compressive

strength in super structure above plinth level up to floor V

Cement mortar 1:6 (1 cement : 6 Coarse sand)

15 mm cement plaster on the rough side of single or half

brick wall of mix :

1:6 (1 cement: 6 fine sand)

12 mm cement plaster on the rough side of single or half

brick wall of mix :

1:6 (1 cement: 6 fine sand)

Finishing walls with Acrylic Smooth exterior paint of

required shade :

Finishing walls with Acrylic Smooth exterior paint of

required shade :

Repairs to Barbed Wire (Concertina Coil/ Fencing)

Fencing with angle iron post placed at required distance

embedded in cement concrete blocks, every 15th post, last

but one end post and corner post shall be strutted on both

sides and end post on one side only and provided with

horizontal lines and two diagonals interwoven with

14 16.18.1 horizontal wires, of barbed wire weighing 9.38 kg per 100 Rm 5480.0 19.60 1,07,408.00

m (minimum), between the two posts fitted and fixed with

G.I. staples, turn buckles etc. complete. (Cost of posts,

struts, earth work and concrete work to be paid for

separately). Payment to be made per metre cost of total

length of barbed wire used.

With G.I. barbed wire

Supplying at site Angle iron post & strut of required size

including bottom to be split and bent at right angle in

15 16.19 opposite direction for 10 cm length and drilling holes upto Kg 1170.00 99.95 1,16,941.50

10 mm dia. etc. complete.

HORTICULTURE & SITE BEAUTIFICATION

Surface dressing of the ground including removing

2.28 vegetation and inequalities not exceeding 15 cm deep and

disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

Digitally signed by Rakesh

Sl No DSR Code Item Unit Quantity Rate Amount

Septic Tank 4 Nos

Septic Tank 8.9 x 2.7

Rough dressing the trenched ground including breaking

Uprooting weeds from the trenched area after 10 to 15

2.6 days of its flooding with water including disposal of SQM 2824.45 4.90 13,839.81

uprooted vegetation.

Supplying and stacking of good earth at site including

2.2 royalty and carriage upto 5 km lead complete (earth SQM 282.45 515.60 1,45,631.22

measured in stacks will be reduced by 20% for payment).

Supplying and stacking at site dump manure from