Construction of platforms along with approach, Restrengthening of SNA storage house at NAC area and laying of mastic acid resistance tiles under acid line (above the ground) between NAC SAC plant in Acid section area, at O.F.Bhandara.

Amount

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc as directyed by EIC and complete.

M&L for excavating over area n.exc 1.5 m deep and getting out in hard/ dense soil, complete as specified & directed by E-I-C.

M & L for removing excavated material (soils), exc. 250 m but n exc. 500 m and depositing where directed, complete all as specified.

M & L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and remmed to a true surface, complete all as specified.

M & L for sand filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering , complete all as specified..

Demolition, Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified.

Removing building materials etc., (other than spoil payable under items 3028 to 3031 in section-3-Earthwork) to a distance of 500m or under beyond the lead included in the rates, including loading, unloading and stacking at the destination etc. complete all as specified and as directed by the EIC.

M&L for brushing neat cement slurry with 3.0 kg of cement per square meter complete as per specification and directed by EIC.

M & L for PCC 1:3:6 Type C2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the E-I-C.

M & L for RCC 1:2:4 type B1 using 20mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M & L for RCC 1:2:4 type B0 using 12.5mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs &in shelves & like complete all as specified and as directed by the E-I-C.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams , and similar work, vertical or to batter, work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete , surface is required to be fair finished complete all as specified and as directed by the Engineer-in-Charge.

M & L for mild steel deformed or twisted bars of 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by EIC.

M&L for dismantling wrought iron or mild steel work of any description not otherwise provided, complete as specified & directed by E.I.C.

Dismantling any type (corrugated, semi- corrugated, etc.) sheets in roof coverings complete all as specified.

S&F for steel roof trusses ( framed ) Fe-290 (Gde E-165, purlins , crane gantries, rails, walkways & fastnening and heavy bracket framing i/c distance pcs, cleats (Beam, tee, angle, channel or flat sections)etc, complete as specified & directed by E.I.C.

M&L Preparation of new surfaces and painting surfaces of iron, steel, brick, stone, conc., asbestos cement or plaster surfaces of any description over 10 cm width or girth with one coat of priming paints plaste coat two coats of Acid Resistant Paint. Colour code will be as directed of EIC.

S & F for ISI marked 2mm thick fibre glass reinforced translucent corrugated sheeting with two sides corrugation lap fixed with coach screw and washer in roof, wall etc. fixed with L or j type or cranked hook bolts , complete all as specified and as directed by the E-I-C.

M&L for 6mm thick asbestos cement corrugated or semi corrugated sheets in roof, walls etc., fixed with L-type or J-type or cranked hook bolts , complete all as specified. Make:charminar, everest or equivalant.

M & L for rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surface & is to be finished even and smooth complete all as specified and as directed by E.I.C.

Supply and fixing Stainless Steel Industrial Turbo ventilator of approved make of 600mm dia including all necessary accessories required for fixing to available profile pattarn or on FRP sheet of required profile 2mm tk roofing system. (General application for all type of roofs for ventilation and day lighting purpose at terrace).

M & L for bitumen mastic flooring 25 mm thick with matt finish all as specified & directed by E-I-C.

M & L for 25 mm thick bitumen mastic to vertical surface of drains/walls in tow coats including wired o.90 mm dia, 16mm mesh fixed with tinned tickets or wire staples at 150 mm C/C all as specified & directed by E-I-C.

M&L for 25mm thick acid / alkali resistance tiles of approved make and colour using acid / alkali resisting mortar ( 1 acid proof cement : 4 coarse sand ) in skirting, dado,wall face and joints filled with acid / alkali resisting cement as per IS : 4457 complete as specified & direction of EIC

M&L for 75mm thick acid / alkali resistance tiles of approved make and colour using acid / alkali resisting mortar ( 1 acid proof cement : 4 coarse sand ) in floor bedding and joints filled with acid / alkali resisting cement as per IS : 4457 complete as specified & direction of EIC.

S.N.Construction (BID ID -852139)