FDR/Mtc. UWS Schms undr UMC Area, Gomati Dist at 1.3 MGD SWTP at Banduar UDP/SH- Prvidng, Fittng Fixng Electrcl Equpmnts of Power Contractor, Spare Contact Kit, MCCB, Star Delta type Mtr Starter etc. undr DWS SD-I, UDP durng yr 2025-26.

Providing fitting fixing of 3 pole power contractor type ML (standard voltage 110,230,415, 50Hz) of L & T make.

ML-4 Type of Cat.No.SS 90910

ML-6 Type of Cat.No.SS 90921

Providing fitting fixing of Spare Contact Kit & Spare Coil for ML series of L &T make.

ML-4 Spare Contact Kit of Cat No.SS95311

ML-6 Spare Contact Kit of Cat. No.SS 95313

ML-4 / ML-6 Spare Coil of Cat.SS 91258

Providing Fitting Fixing of Bimetal over load relay type MN with single phasing protection of L & T make

MN-5 of Cat. No. SS9413700 K0

Providing fitting fixing of thermal timer type GT-200 of Cat. No.SS91270 of L & T make (Operating Voltage 230/250 V, 360 V, 400/440 V,500 V, 50 Hz. For 5-18 secs Range).

Providing fitting fixing of Push button Pendants of 6A, 415 V, 50 Hz. Of Cat No. SS 90502 of L & T make.

With 2 Push Buttons-

Providing fitting fixing of Connecting Busbar Link of Cat. ST41968OOOO of L&T make

4MPCB 55 MM WIDTH W/O ACC.-

Supplying and fixing of the following electrical accessories including necessary connection as required.

36/40 Watt Fluorescent Tube light

14/15 Watt Retrofit CFL Bulb

36/40 Watt Electronic Ballast for FTL

Angle /Batten/ Pendent Holder

Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):

60 watt LED street light fixture with integral driver and secondary lens (IP 66):-

Supplying and fixing of GI pipe (medium gauge) bracket at suitable angle for fixing of outdoor light on wall/RCC base with necessary MS clamp nut, bolts etc as reqd 40 mm dia size.

Supplying & fixing of 1200 mm sweep white color AC ceiling fan with brush less dirrect current (BLDC) motor having class B insulation, power factor not less than 0.9 complete with 300 mm down rod, canopies, shackle kit, 3nos blades, safety rope including wiring the down rod with 2x1.5 sqmm PVC insulated copper conductor cable(FR) (BEE 5 star/minimum service value 6.0 m3/min/W & tolerance as per IS:374-2019) :

Supplying & installation of 400 mm sweep AC padestal fan with metal blade including connection etc as required:

Wiring for Circuit/Sub-main wiring with the following sizes of PVC insulated Copper conductor cable(FR) in existing pvc casing capping/conduit in recess/surface in/c connection etc as reqd.

2X1.5 Sqmm

Providing and fitting fgixing of fully Automatic Star Delta type Motor Starter (3 ph. 50 Hz, 415V,) in steel sheet Enclosures with Contractors and Timer etc. complete suitable for submersible pump L & T BCH, ABB make as per specification and direction of the Engineer-in-charge

50 HP/37 kw Relay range within 28-42 + 10%

75 HP/55 kw Relay range within 45-75 + 10%

100 HP/75 kw Relay range within 45-75 + 10%

125 HP/90 kw Relay range within 45-75 + 10%

Providing and fiiting fixing with PVC insulated single core multistarnd Copper cable conforming to IS 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge.

i. 50 sqmm

ii. 70 sqmm

iii. 95 sqm

Providing and fitting fixing 3 phase indicating lamp fitted with panel board with three different colour lamps with batten holder complete as per specification and direction of the Engineer-in-Charge.

Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) ( 12 mm dia perforation ) , laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-in-charge. for 3-phase connection with 4.00 mtr. Long G.I. pipe

Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-incharge. i) 250 amps

ii) 200 amps

Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineerin-charge.

Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. i. 80-100 Amps

Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required.

2 X 1.5 sq mm

Supplying and fixing of the following electrical accessories including necessary connection etc. as required.

5/6 amps piano type switch

3/6 pin 16/20 amps piano type socket

Pandent holder

Angle/batten holder

Ceiling rose

Supplying and fixing of the following sizes wooden switch boards with 3mm thick bakelite cover etc. as required.

203mm x 254mm (8" X 10") :-

Supplying & installation of 450 mm sweep 1400 rpm metalic body exhaust fan including connection etc as required (ISI marked) :

Supplying and fixing of the following Lamps & accessories including connection etc. as required

18/20 watt retrofit CFL:-

Supplying and installation of fuse unit kitkat/HRC/HBC of the following ratings in existing main switch/panel board including necessary connection etc as required:

100 amps kitkat porcelain fuse unit with base(rewireable):-

200/250 amps kitkat porcelain fuse unit with base(rewireable):-

Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required: i. 300 amps 415 volts four strip Copper busbar chamber 6 ways of size (610mmx410mmx150mm):-

ii. 400 amps 415 volts four strip Copper busbar chamber 6 ways of size (610mmx410mmx150mm):

Supplying and fixing of Copper terminal ends (LUGS) - long barrel of following sizes: i. 50 Sqmm

ii. 70 sqmm

iii. 95 sqm

Please Enable Macros to View BoQ information