Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.3 Cr
EMD Value
₹1.3 L
Closing Date
17 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Panchayat R&B Division Bharuch
Resurfacing and Strengthening of Mota Jambuda Approach Road Ch. 0/0 to 1/00 (As per site 0/00 to 0/850) Ta. Netrang Dist. Bharuch under MMGSY (Tribal) Package No. 23/2026-27
359069
14/2026-27
Open
Civil - All
Fixed-rate
Bharuch
5 documents required · 5 mandatory
₹3,600
Executive Engineer Panchayat R&B Division Bharuch
₹1.3 L
2 Nov 2026
2 Nov 2026
2 Nov 2026
17 Nov 2026
2 Nov 2026
90 days
No. figures Amount
1 Clearing and grubbing road land including uprooting wild vegetation 0.34 Hect. 28393.04
grass bushes, shrubs, sapling and trees of girth up to 300mm
removal of stumps of trees cut earlier and disposal of
unserviceable materials and stacking of serviceable materials as
per Clause-201 (area of light density) by mechanical means in area
of light jungle.
2 Box cutting the road surface to proper slope and camber for 956.25 Cum 104.21
making a base for road work including removing the excavated
stuff and depositing on the road side slope as directed within all
lead and lift.
3 Earthwork in cutting in all sorts of soil and soft murrum including 201.00 Cum 127.75
conveying and spreading the stuff, embankment as and where
directed within 200 meters from the end of cutting with all required
lead and lift.
4 Providing, laying and spreading Granular sub base (Grade-I) by 360.00 Cum 724.17
providing close graded MCBT material in single layer with motor
grader on prepared surface, mixing by mix in place method with
rotavator at OMC and compacted with vibratory roller 80 to 110 KN
static weight to achieve desired density etc. completed.
5 Providing & laying compacted WBM Grading-II using MCBT metal 329.00 Cum 1068.58
of size 53mm to 22.4mm in required layers including using 24%
stone screening, 11.2mm size and 8% stone dust as filler including
spreading, watering and consolidation by vibratory roller as per
MORTH specification etc complete as directed by engineer in
6 Earthwork for embankment including breaking clods, dressing with 1110.50 Cum 182.36
all lead and lift including rolling with power roller, watering and
consolidation from borrow pits within land width.
7 Providing and laying compacted of specified quarry spaull in side 102.00 Cum 572.67
shoulder including carriage of material and spreading on prepared
base including compacting as per MOST specification etc.
8 Providing and fixing Guard stone as per I.R.C. type design 50.00 No. 349.11
including white washing etc. complete (i) Fixing in C.C. 1:5:10
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
9 Hazard Marker Sign :- Providing and fixing sign board made out of 6.00 No. 2423.74
2mm aluminium sheet size 90 x 30 cms. rectangle as per the
design / drawing attached (IRC) pretreated with phospheting & acid
etching, coated with one coat of epoxy primer and two coats of best
quality epoxy paint reflectorised with retro reflective sheeting as per
latest M.O.R.T.H. specification, 3.1m long stand post and frame
fabricated from suitable size iron angle of 35 x 35 x 3mm & 50 x
x 5mm painted with best quality epoxy coatings in black and white
bends. The details of symbol or inscription / numerals for each
board shall be as per instruction of Engineer in charge. The fixing
at site shall be in 1:2:4 C.C. block of size 45 x 45 x 60cms for each
leg including excavation curing etc. complete under the supervision
of Engineer in charge (A) Engineer Grade (VR).
10 Village name / Bump Ahead sign : Providing and fixing sign boards 6.00 No. 5045.37
made out of 2 mm alluminium sheet size 90 x 60 cms rectangle as
per the design of IRC-67-1977 pre treated with phospheting
process and acid etching coated with one coat of epoxy primer and
two coats of best quality epoxy paint reflectonsed with retro
reflective sheeting as per latest M.O.R.T.H. specifications. Letters
and numerals should be as per IRC-30-1968, 3.1m long (2 Nos)
stand post and frame fabricated from suitable size iron angle of
x 50 x 5 mm painted with best quality epoxy coating in black and
white bends. The details of symbol or inscription / numerals for
each board shall be as per the instruction of engineer in charge.
The fixing at site shall be in 1:2:4 C.C. block of size 45 x 45 x
cms for each leg including excavation, curing etc. complete under
the supervision of engineer- in-charge (A) Engineer Grade (VR).
11 Direction sign (Junction board) :- Providing and fixing sign boards 2.00 No. 14831.71
made out of 2mm aluminium sheet size 244 x 122cms. rectangle
as per the design of IRC-67-1977 pre treated with phospheting
process & acid etching coated with one coat of epoxy primer and
two coats of best quality epoxy paint reflectorised with retro
reflective sheeting as per latest M.O.S.T. specifications, Letters
and numerals should be as per IRC-30-1968, 3.1m long (2 Nos.)
stand post and frame fabricated from suitable size iron angle of
x 50 x 5mm, 75 x 75 x 6mm as required, painted with best quality
epoxy coatings in black and white bends. The details of symbol or
inscription / numerals for each board shall be as per the instruction
of engineer in charge. The fixing at site shall be in 1:2:4 CC block
of size 45 x 45 x 60cms. for each leg including excavation curing
etc. complete under the supervision of engineer in charge. (A)
Engineer grade (VR).
12 Citizen's Information Board : Providing and fixing of typical 1.00 No. 23062.34
information board as per instruction. Two M.S. plate of 1.6mm thick
of 900mm x 750mm size fixed at top and bottom duly welded with
M.S. angle with angles of 25 x 25 x 5mm thick M.S. plate shall be
welded by two vertical M.S. flat and four horizontal M.S. flats 5mm
thick to 75mm x 75mm of 12 SWG square tube posts duly
embedded in cement concrete M-15 grade C.C. blocks of 600 mm
x 600mm x 750mm below ground level. Painting new letters and
figures of any shade with ready mixed synthetic enamel paint of
superior quality in required shade and coloured, all sections of
frame joints and steel tube will be painted with primer and two
coats of epoxy paint as per drawing clause 1701 & Annexure
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
13 Road marking with hot applied thermoplast compound with 170.00 Sq.m. 367.73
reflectorising glass beads on bituminous surface and laying of hot
applied thermoplastic compound 2.5mm thick including
reflectorising glass beads @250 gms/sqmt area, thickness of
surface applied glass beads as per IRC 35. The finish surface to
be level uniform free from streaks and holes.
14 Supply & fixing logo board of MMGSY diamond size (600mm x 1.00 No. 4129.89
600mm) 16 gauge & board plate size (900mm x 250mm) 16 gauge
thick M.S plate and 2.40 mt. deep length single angle 75 x 75 x
mm size including fitting and painting lettering with luminous color
as per drawing etc. complete.
15 Cautionary Warning Sign :- Providing and fixing sign board made 6.00 No. 3808.66
out of 2mm aluminium sheet size 90 x 90 x 90 cms equilateral
triangle as per the design of IRC-67-1977. Pre treated with
phospheting process and acid etching coated with one coat of
epoxy primer and two coats of best quality epoxy paint,
reflectorized with retro reflective sheeting as per the latest
M.O.R.T.H. specification, 3.1 Mt. long stand post and frame
fabricated from suitable size iron angle of 35 x 35 x 3 mm, 75 x
x 6 mm; painted with best quality epoxy coating in black and white
bends. The details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in 1:2:4
CC block of size 45 x 45 x 60 cms for each leg, including
excavation curing etc. complete under the supervision of Engineer-
in-charge. (A) Engineer grade (VR).
16 Informatory Warning Sign :- Providing & fixing sign boards made 1.00 No. 3856.90
out of 2mm aluminium sheet size 80 x 60 cms as per design of IRC
67-1977. Pre treated with phospheting process and acid etching
coated with one coat of epoxy primer and two coats of best quality
epoxy paint, reflectorized with retro reflective sheeting as per the
latest M.O.R.T.H. specification, 3.1 mt. long stand post and frame
fabricated from suitable size iron angle of 35 x 35 x 3 mm, 75 x
x 6 mm; painted with best quality epoxy coating in black and white
bends. The details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in 1:2:4
CC block of size 45 x 45 x 60 cms for each leg, including
excavation curing etc. complete under the supervision of Engineer-
in-charge. (A) Engineer grade (VR).
17 Supply & fixing of specified Vanbandhu Yojna logo board as 1.00 No. 5337.85
directed by Engineer in charge : 600 x 600mm diamond logo plate
of 2mm alluminium / 4mm ACP with Type-4 Class-B high intensity
grade reflective sheeting confirming to IRC 67-2012, 900 x 250mm
ACP name plate, angle iron post 75 x 75 x 6 mm including
foundation, fabrication, welding, fixing, painting, luminous colour,
lettering and carting, complete as per drawing and specifications.
18 Excavation for foundation up to 1.50 mt. depth including sorting out 552.00 Cum 172.17
and stacking of useful material and disposing off the excavated
stuff within all lead and lift for all sorts of soil.
19 Excavation for foundation for depth from 1.50 mt to 3.00 mt. 287.00 Cum 486.77
including sorting out and stacking of usefull material and disposing
of the excavated stuff up to 50 Mt. lead (B) Dense & Hard soil.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
20 Excavation for foundation for depth from 3.00 mt to 5.00 mt. 18.00 Cum 571.09
including sorting out and stacking of usefull material and disposing
of the excavated stuff up to 50 Mt. lead (B) Dense & Hard soil.
21 Providing and laying in foundation with ordinary cement concrete M- 422.00 Cum 3105.12
100 mix and providing necessary vertical pin headers including
formwork, vibrating, ramming and curing complete.
22 Providing and casting in situ ordinary cement concrete M-150 mix 308.00 Cum 3678.42
and providing necessary pin headers including shuttering,
scaffolding, laying, vibrating, curing and finishing complete without
V-groove (A) height 0.0 to 5.0 mt.
23 Supplying and fixing reinforced concrete heavy duty non-pressure 30.00 Rmt. 6596.20
pipes with collars for culverts including setting and joining the pipes
in C.M. 1:2 watering and laying (to level or slopes) of I.S. class NP-
4 of 1200mm internal diameter.
24 Providing and fixing I.S.I. mark T.M.T. Bar Fe-550D reinforcement 9804.00 Kg. 76.22
for R.C.C. work including binding, bending and placing in position
complete upto floor two level.
25 White washing with lime on wall surface (two coats) to give an 99.00 Sq.m. 12.09
even shade including thoroughly booming the surface to remove all
dirt, dust, mortar drops and other foreign matter.
26 Providing and casting in situ ordinary cement concrete M-250 mix 638.00 Cum 4318.76
with Trimix C.C. Road laid as directed including vibrating, curing
and filling in joints with bitumen complete.
27 Filling available excavated earth (excluding rock) in trenches, 66.00 Cum 130.40
plinth, sides of foundation etc. in layer not exceeding 20 cm in
depth consolidating each deposited layer by ramming and watering
etc. complete.
28 Providing and laying weep hole in abutment and returns by using 278.00 No. 82.57
A.C. pipes of 100 mm dia. with laying in proper grade and jointing
the completed as per detailed specification.
29 Providing and laying in foundation with ordinary cement concrete M- 636.00 Cum 4374.57
200 & providing necessary vertical pin headers in including
shuttering, scaffolding, laying, vibrating, curing and finishing
complete without V-groove (height 0 to 5 mt.)
30 Providing and fixing in position mild steel dowel bars (I.S.I. mark) in 8.00 No. 339.88
pier caps or abutments caps for anchorage in fixed end as per
detailed drawing including cutting, bending and welding complete.
31 Providing and fixing in position mild steel dowel bars (I.S.I. mark) in 8.00 No. 396.28
pier caps or abutments caps for anchorage in free end as per
detailed drawing including cutting, bending and welding complete.
32 Providing and casting in situ controlled cement concrete M-250 for 21.63 Cum 5025.07
R.C.C. works in pier cap, abutment cap and dirt wall including
controlled cement concrete M-300 bed block or pedestal of
required size below bearing as per detailed drawing, centering,
shuttering, scaffolding wherever necessary laying, vibrating, curing
and finishing complete.
33 Providing and casting in situ controlled cement concrete M-250 for 86.00 Cum 5106.66
R.C.C. solid slab including centering, scaffolding, curing and
finishing complete.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
34 Providing and casting in situ controlled cement concrete M-400 for 14.00 Cum 5373.31
average 100mm thick wearing coat laid as directed including
tamping, vibrating, finishing, curing and filling in joints with bitumen
35 Providing and casting in situ controlled cement concrete M-250 for 21.00 Cum 5106.66
R.C.C. approach slab including centering, scaffolding, curing and
finishing complete.
36 Providing and laying in position I.S.I. mark Fe-500D bar for mass 1.709 M.T. 73217.53
concrete in pier, abutment, wing wall including cutting, bending,
hooking and tying complete as per detailed drawing.
37 Providing and placing in position I.S.I. mark Fe-500D bar 11.213 M.T. 72601.87
reinforcement including cutting, bending, hooking and tying
complete as per detailed drawing for Slabs, Cap & dirt wall.
38 Providing 12mm thick asphalt filler joint as per drawing. 15.12 Sq.m. 702.13
39 Providing and laying filter media 600 mm thick as directed at back 168.00 Sq.m. 1180.34
of abutment, returns and wing walls as per detailed specifications.
40 Providing and filling sand behind abutment and behind return in 311.11 Cum 445.41
layers as directed.
41 Providing and laying rubble for apron (each stone weighting not 31.00 Cum 1041.05
less than 40 kg) including packing and filling in the interstices with
quarry spalls.
42 Provision of an Reinforced cement concrete crash barrier at the 50.00 Rmt. 9616.21
edges of the deck, approaches to bridge structures, constructed
with M-40 grade concrete with TMT Fe-550D reinforcement
conforming to IRC:21 and dowel bars 25 mm dia., 450 mm long at
expansion joints filled with pre-moulded asphalt filler board as per
the drawing having bottom size of 450mm, top 225mm and Ht.
1100mm all locations as directed by the Engineer.
43 Demolition including stacking serviceable material and disposal of 1.932 Cum 1030.20
unserviceable material with all lead and lift. (1) R.C.C. work.
44 Demolition of brick work and stone masonry including stacking 36.00 Cum 536.09
serviceable material and disposal of unserviceable material with all
lead and lift. (2) Rubble masonary.
45 Supplying and fixing reinforced concrete heavy duty non-pressure 15.00 Rmt. 4685.19
pipes with collars for culverts including setting and joining the pipes
in C.M. 1:2 watering and laying (to level or slopes) of I.S. class NP-
4 of 900mm internal diameter.
46 Providing laying and rolling 25 mm thick open graded premixed 4.00 M.T. 3849.11
bitumineous carpet with B.T. aggregate as specified and using
bitumen for mixing with aggregate at the rate of 3.36 % i.e.
kg/MT. of total mix including heating and mixing in drum mix plant
and spreadig the same with paver finisher and consolidation with
vibratory roller including necessary firewood, oil, lubricants, labour
charges etc. using contractor's own drum mix plant and equipment,
tool etc. completed in accordance with the requirement of
specification.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
47 Providing and laying sealcoat with B.T. agreegate as specified 3.00 M.T. 4669.23
using agreegate at the rate of 0.18 Cu.mt / 10 Sq.M. and bitumen
(VG-30) for mixing with agreegate at the rate of 4.50 % i.e.
Kg/M.T. of total mix including heating and mixing in drum mix plant
and spreading the same with paver finisher and consolidation with
vibratory roller including necessary firewood, oil, lubricants, labour
charges using contractor's own drum mix plant machineries and
equipment, tools etc. complete in accordance with the requirement
of specification.
48 Providing and laying tack coat with bitumen emulsion (RS-1) at the 75.00 Sq.m. 28.28
rate of 4.00 Kg / 10 Sq.M. on the prepare bituminous surface etc.
complete as directed with all labour and materials.
49 Providing and laying tack coat with bitumen emulsion (RS-1) at the 75.00 Sq.m. 17.88
rate of 2.50 Kg / 10 Sq.M. on the prepare bituminous surface etc.
complete as directed with all labour and materials.
TOTAL Rs.
i.e. Rs. One Crore Thirty lacs Eighty Six thousand One hundred Twenty Five and Ninety Four paisa only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-
In-Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where
there is a change as per actual mix design the cost of difference of cement consumption have been deducted
from the rate of original item at the rate of input rate mentioned in all the tender.
5. Credit for dismantalled & reuse materials of amount of Rs. 98,980.53 must be recovered from 1st R.A.
bill of Contractor's.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me
and found order.
Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer
Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,
Valiya Bharuch Bharuch
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
GRs (1).pdf
General Techical Specifications.pdf
Specification Index.pdf
Drawings.pdf
BOQ_MMGSY_2026-27_PACK_23_MOTRA JAMBUDA.pdf
SBD_MMGSY_2026-27_PACK_23_MOTRA JAMBUDA.pdf
NIT_MMGSY_2026-27_PACK_23_MOTRA JAMBUDA.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .