Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-Finance | ₹5.0 L | L1 | Accepted-Finance Lowest |
| 2 | L2₹5.3 LRejected-Finance | ₹5.3 L | L2 | Rejected-Finance Other than lowest |
| 3 | L3₹5.7 LRejected-Finance VILLAGE DHAR P O DASHERA TEH BALH REWALSAR DISTT MANDI HP 175036 | REWALSAR | MANDI | HIMACHAL PRADESH | 175036 | ₹5.7 L | L3 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | Zakir Hussain L1 | NOOR HUSSAIN L2 | Chuni lal L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in below classification of of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge. | 617.4 | Cum | 365 ₹2.3 L | 365 ₹2.3 L | 375 ₹2.3 L |
| 2.00 | Cutting of GI Pipe of various dia with generator welding set including carriage at site of work complete in all respect in all leads and lifts. 150 mm diameter | 7,929.45 | CM | 3 ₹23,788.35 | 4 ₹31,717.80 | 5 ₹39,647.25 |
| 3.00 | Welding of GI pipe of various dia with Diesel Generator welding set at site of work according to site requirement in minimum three layers to make the joint leakproof according to relevant BIS standards/approved specifications and to the entire saitsfactioin of the Engineer-in-charge complete in all respect in all leads and lifts. 150 mm diameter | 23,788.36 | CM | 6 ₹1.4 L | 7 ₹1.7 L | 8 ₹1.9 L |
| 4.00 | Laying, jointing and testing of GMS pipe (by way of circumfrential butt welded joints by electrical arc welding) and testing of GMS pipe (class mentoned below) of following dia meters confirming to BIS: 1239 (Part-1), grade specified below (latest with upto date amendments) having wall 5.40 mm as specified below with bevelled ends and capable of withstanding required test pressure in a random length of 4 to 7 meters, including manufacturing reducers / tapers, all short pieces, beds etc. as per site requirement made from parent tubes. The laying of pipe will include all operation such as cutting, welding, jointing, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in Charge. GMS Pipe 150 mm diameter (HC) (P/E) | 80 | Rmt. | 200 ₹16,000 | 205 ₹16,400 | 220 ₹17,600 |
| 5.00 | Providing and Fixing Cast Steel Non Return Valve of 150 mm diameter mentioned below BS:1868/API-6 D class ASA 300 with flange Table 28 conforming to IS-9001-2000 or latest with upto date ammendments of Bir / Pelicon /Kartar make with nut & bolts, gasket including complete process of opening of existing valve and fixing new valve by all means complete job in all respect and to the entire satisfaction of the Engineer-in-Charge. | 1 | Nos. | 91,500 ₹91,500 | 91,550 ₹91,550 | 91,600 ₹91,600 |
Tender Value
₹4.9 L
EMD Value
₹9,900
Closing Date
14 Apr 2026, 5:00 pmClosed
Executive Engineer
EE JSV Mandi
Repair and Maintenance of Rising main by cutting welding and testing of MS pipes of 150mm diameter
2026_HPIPH_133601_1
671-770
Open Tender
Civil Works
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹350
₹9,900
2 Jun 2026
8 Apr 2026
16 Apr 2026
8 Apr 2026
14 Apr 2026
8 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in below classification of of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge. | - | Cum | - | - |
| 2 | Cutting of GI Pipe of various dia with generator welding set including carriage at site of work complete in all respect in all leads and lifts. 150 mm diameter | - | CM | - | - |
| 3 | Welding of GI pipe of various dia with Diesel Generator welding set at site of work according to site requirement in minimum three layers to make the joint leakproof according to relevant BIS standards/approved specifications and to the entire saitsfactioin of the Engineer-in-charge complete in all respect in all leads and lifts. 150 mm diameter | - | CM | - | - |
| 4 | Laying, jointing and testing of GMS pipe (by way of circumfrential butt welded joints by electrical arc welding) and testing of GMS pipe (class mentoned below) of following dia meters confirming to BIS: 1239 (Part-1), grade specified below (latest with upto date amendments) having wall 5.40 mm as specified below with bevelled ends and capable of withstanding required test pressure in a random length of 4 to 7 meters, including manufacturing reducers / tapers, all short pieces, beds etc. as per site requirement made from parent tubes. The laying of pipe will include all operation such as cutting, welding, jointing, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in Charge. GMS Pipe 150 mm diameter (HC) (P/E) | - | Rmt. | - | - |
| 5 | Providing and Fixing Cast Steel Non Return Valve of 150 mm diameter mentioned below BS:1868/API-6 D class ASA 300 with flange Table 28 conforming to IS-9001-2000 or latest with upto date ammendments of Bir / Pelicon /Kartar make with nut & bolts, gasket including complete process of opening of existing valve and fixing new valve by all means complete job in all respect and to the entire satisfaction of the Engineer-in-Charge. | - | Nos. | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
Form6.pdf
Tender Documents • 0.67 MB
Form8.pdf
Tender Documents • 1.13 MB
BOQ_197506.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid