supply,laying,testing and commissioning of LT UG cable around SPTTVM on turnkey basis

Amount

Earth work excavation in all class of soil/rock/tar/concrete for a minimum depth of 1m and width 0.4m with out damaging the existing cables,pipe lines, other utility crossings and installations observing safety precautions, shoring of pits and dewatering the trench wherever necessary, spreading the bottom of the trench with 10cm sieved excavated earth and after laying of LT cable using HDPE pipe of suitable sizes (Cable laying measured sperately) filling with sieved earth on both side of the cable and on the top to a level of 10cm above the cable, back filling the trench with excavated earth, consolidating in layers of 15 cm with suitable machinary, disposing surplus earth and debris after refilling ,clearing the site including supplying HDPE pipe for drawing cable through the pipe at road crossings, wherever required depth of trench could not be achieved due to other obstrucions as directed by the Engineer- in charge, providing cable route markers at 100 m interval and at deviations , & joint markers as per approved drawings, including cost of all materials , labour charges , hire charges, transportation etc complete excluding the cost of HDPE pipe and road restoration charges and cost of cable and laying charges.

Supply, Laying testing and commissioning of LT UG cable(Al armoured) of 2*4sqmm, sizes after meggering in already formed/built in /permanant cable duct after removing covering slabs of ducts at locations /GI/HDPE pipe/ culvert/ Bridges, rising cables at a height of 1M from ground level and support at feeder pillar/Automatic Street Light Controller and then to consumer premises/ street lighting, providing cable tag at an interval of 5m, supply and doing joints through cable glands , , all charges for transporting, handling, uncoiling and paving of cable in trenches using standard cable laying equipments as per IS specifications, opening the cable trench cover and closing the cover after laying the cable, after observing all safety precautions and without damaging the existing installations etc complete including supplying cable glands,HDPE Pipe and carrying out joints and providing loop as per standard , testing and commissioning and submission of final as built cable route drawings as per specifications including cost of all materials

Supply, Laying testing and commissioning of LT UG cable(Al armoured) of 3.5x6 sqmmsizes after meggering in already formed/built in /permanant cable duct after removing covering slabs of ducts at locations /GI/HDPE pipe/ culvert/ Bridges, rising cables at a height of 1M from ground level and support at feeder pillar and then to consumer premises, providing cable tag at an interval of 5m, supply and doing joints through cable glands , , all charges for transporting, handling, uncoiling and paving of cable in trenches using standard cable laying equipments as per IS specifications, opening the cable trench cover and closing the cover after laying the cable, after observing all safety precautions and without damaging the existing installations etc complete including supplying cable glands, HDPE Pipeand carrying out joints and providing loop as per standard , testing and commissioning and submission of final as built cable route drawings as per specifications including cost of all materials

Supply, Laying testing and commissioning of LT UG cable(Al armoured) of 3.5x25 sqmmsizes after meggering in already formed/built in /permanant cable duct after removing covering slabs of ducts at locations /GI/HDPE pipe/ culvert/ Bridges, rising cables at a height of 1M from ground level and support at feeder pillar and then to consumer premises, providing cable tag at an interval of 5m, supply and doing joints through cable glands , , all charges for transporting, handling, uncoiling and paving of cable in trenches using standard cable laying equipments as per IS specifications, opening the cable trench cover and closing the cover after laying the cable, after observing all safety precautions and without damaging the existing installations etc complete including supplying cable glands,HDPE Pipe and carrying out joints and providing loop as per standard , testing and commissioning and submission of final as built cable route drawings as per specifications including cost of all materials

Supply, Laying testing and commissioning of LT UG cable(Al armoured) of 3.5x50 sqmmsizes after meggering in already formed/built in /permanant cable duct after removing covering slabs of ducts at locations /GI/HDPE pipe/ culvert/ Bridges, rising cables at a height of 1M from ground level and support at feeder pillar and then to consumer premises, providing cable tag at an interval of 5m, supply and doing joints through cable glands , , all charges for transporting, handling, uncoiling and paving of cable in trenches using standard cable laying equipments as per IS specifications, opening the cable trench cover and closing the cover after laying the cable, after observing all safety precautions and without damaging the existing installations etc complete including supplying cable glands,HDPE Pipe and carrying out joints and providing loop as per standard , testing and commissioning and submission of final as built cable route drawings as per specifications including cost of all materials

Supply, Laying testing and commissioning of LT UG cable(Al armoured) of 3.5x95 sqmmsizes after meggering in already formed/built in /permanant cable duct after removing covering slabs of ducts at locations /GI/HDPE pipe/ culvert/ Bridges, rising cables at a height of 1M from ground level and support at feeder pillar and then to consumer premises, providing cable tag at an interval of 5m, supply and doing joints through cable glands , , all charges for transporting, handling, uncoiling and paving of cable in trenches using standard cable laying equipments as per IS specifications, opening the cable trench cover and closing the cover after laying the cable, after observing all safety precautions and without damaging the existing installations etc complete including supplying cable glands,HDPE Pipe and carrying out joints and providing loop as per standard , testing and commissioning and submission of final as built cable route drawings as per specifications including cost of all materials

Supply, Laying testing and commissioning of LT UG cable(Al armoured) of 3.5x150 sqmmsizes after meggering in already formed/built in /permanant cable duct after removing covering slabs of ducts at locations /GI/HDPE pipe/ culvert/ Bridges, rising cables at a height of 1M from ground level and support at feeder pillar and then to transformer LT panel , providing cable tag at an interval of 5m, supply and doing joints through cable glands , , all charges for transporting, handling, uncoiling and paving of cable in trenches using standard cable laying equipments as per IS specifications, opening the cable trench cover and closing the cover after laying the cable, after observing all safety precautions and without damaging the existing installations etc complete including supplying cable glands, HDPE Pipeand carrying out joints and providing loop as per standard , testing and commissioning and submission of final as built cable route drawings as per specifications including cost of all materials

Supply, Installation, Testing and Commissioning of SMC make automatic street light controller Box , connecting cables , including construction of suitable foundation, providing location name, labelling, danger boards etc, earthing, conducting pre-commissioning tests as required ,including cost of all materials and transportation charges.

Supply, Installation,wiring , Testing of 3ph dust and vermin proof SMC meter box with 32 Amp cutout fuse and neutral link at consumers premises ,shifting of exixting 1 ph meters on newly erected SMCbox ,wiring upto db,Earthing ,etc. ,including cost of all materials,labour and transportation charges.

Supply, Installation, Testing and Commissioning of metallic Feeder Pillar Box with isolator at both ends , provision for connecting incoming cable and out going cables ,minimum 15 nos. of out going terminals with HRC fuse protection ( with 3 nos. 16 A HRC fuse , 1 no. 32A HRC fuse and 1 no. 62A HRC fuse in each row)for giving service connections including construction of suitable foundation providing location name, labelling, danger boards etc, earthing, conducting pre-commissioning tests as required ,including cost of all materials and transportation charges.

Supply, Installation,wiring , Testing of 1ph dust and vermin proof SMC meter box with 16 Amp cutout fuse and neutral link at consumers premises ,shifting of exixting 1 ph meters on newly erected SMCbox ,wiring upto db,Earthing ,etc. ,including cost of all materials,labour and transportation charges.