Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹5.8 L+₹4,546.06 (0.80%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹6.3 L
EMD Value
₹9,400
Closing Date
28 Oct 2021, 5:00 pmClosed
Assistant Engineer,LSGD Section,Pallipuram GP
Assistant Engineer,LSGD Section,Pallipuram GP
25/21-22 Veterinary Hospital Road Maintenance in w-13
2021_LSGD_446427_1
2021-22/2/AE/PPM
Open Tender
Civil Works - Roads
Item Rate
240 days
Pallipuram GP
Please refer tender Documents
6 documents required · 6 mandatory
₹1,460
Yes
₹9,400
Yes
12 Jan 2022
21 Oct 2021
1 Nov 2021
21 Oct 2021
28 Oct 2021
21 Oct 2021
Amount
CULVERT
3.5.1 : Excavation in Cutting in Soil by manual means with lead upto 50 m Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3
od1431089/2021_2022 : RING BUND Type II Putting up ring bund with earth fille gunny bags of top width .75m bottom width 1.5 m height 1.5 m side and filling in between with earth to form ring bund and maintaining the same leak proof till the completion of the work and clearing the site by dismantling the bund after completion of the work.etc.complete.
od1390550/2021_2022 : Bailing out water using 5HP engine and pump set including conveyance to site and erection, cost of fuel, lubrication oil and other stores, pay of staff etc complete
od1390552/2021_2022 : DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.
od1390560/2021_2022 : 11.4.3.1 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings<br>and technical specifications Clause 802, 803, 1202 & 120<br>I.P.C.C grade M 10<br>(i)Nominal mix 1:4:8 modified 11.4.1.1
od1390566/2021_2022 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 <br>II.P.C.C grade M 15<br><br>(i)Nominal mix (1:2.5:5)
od1188810/2021_2022 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203<br>IV.R.C.C grade M 20
od1431142/2021_2022 : Providing concrete for plain/reinforced concrete in open foundations complete as per<br>drawings and technical specifications Clause 802, 803, 1202 & 1203<br>V. R.C.C. grade M 25<br>
11.8 : Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202
re tarring
3.2 : Preparation of Foundation for Embankment Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.
od1431223/2021_2022 : Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification<br>including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed<br>material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and<br>compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting,<br>barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification<br>Clause 406.<br>By Mechanical Means with 1 km lead<br>
75.5.1.1pb : Prime Coat - Low porosity - With Packed Bitumen Rates <br> Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
75.5.2.2pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
75.5.2.1pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
od1431229/2021_2022 : Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates<br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed<br>coarse aggregate using chips spreader with alternate applications of bituminous binder and key<br>aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of<br>compaction as per Technical Specification Clause 506
od1431232/2021_2022 : Modified Penetration Macadam 50 mm thick using Bitumen S-65 - Packed Bitumen<br>Rates. Construction of penetration macadam over prepared base by providing a layer of compacted crushed<br>coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates<br>and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per<br>Technical Specification Clause 506.
od1431240/2021_2022 : 20mm thick Open-Graded Premix Carpet using Bituminous (penetration<br>grade/modified bitumen) Binder - Bitumen S-65 - Packed Bitumen Rates. Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6<br>mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve<br>as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with<br>a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal<br>coat of either Type A or Type B or Type C as per Technical Specification Clause 508.<br>Case - I By Manual Means (II)Bitumen (S-65)
od1445824/2021_2022 : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates<br>Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade<br>and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510<br>A.By Manual Means<br>Case III : Type C<br>(II)Bitumen (S-65)<br>
Bidder Name
SARATH M S
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_636511.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .