Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC | L1 | Accepted-AOC AWARDED DUE TO L1 | |
| 2 | L2₹12.0 L+₹1.5 L (14.3%)Rejected-Finance | L2 | Rejected-Finance REJECTED DUE TO L2 | |
| 3 | L3₹13.3 L+₹2.8 L (27.0%)Rejected-Finance 364 MAHAVEERPURAM BEHIND FUN WORLD CHOPASNI ROAD JODHPUR RAJ | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-Finance REJECTED DUE TO L3 | |
| 4 | L4₹14.3 L+₹3.8 L (35.9%)Rejected-Finance | L4 | Rejected-Finance REJECTED DUE TO L4 | |
| 5 | L5₹14.7 L+₹4.2 L (40.0%)Rejected-Finance | L5 | Rejected-Finance REJECTED DUE TO L5 |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
4 Jun 2022, 6:00 pmClosed
GE SHIKARGARH
MILITARY ENGINEER SERVICES GARRISON ENGINEER SHIKARGARH NEAR ASC SUPPLY DEPOT RATANADA JODHPUR - 342011
REPAIR / MAINT / REPLACEMENT OF INTERNAL WIRING, FITTING AND FIXTURE IN JCO / ORS MD ACCN AT SHIKARGARH ENCLAVE UNDER GE SHIKARGARH
2022_MES_523912_2
8756/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE SHIKARGARH
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE SHIKARGARH
₹40,000
Yes
16 Jul 2022
28 May 2022
6 Jun 2022
28 May 2022
4 Jun 2022
28 May 2022
Amount
Taking down carefully existing unserviceable aluminum/copper point wiring of any description & in any position with and including taking out and removing existing wooden battens/conduits /casing caping fixed on surface and all fittings including unserviceable sunken/surface boxes & terminal/junction boxes of any description, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures for reuse at site or depositing to MES store and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed
Material and labour for PT point wiring for One light / One fan / One Call bell point controlled by one switch complete with 1.5 sq mm single core multi stranded copper conductor PVC FRLS insulated unsheathed 1100 Volt grade cable in and incl PVC FRLS new casing capping of size (ISI Marked) with accessories including new pressed steel terminal boxes (sunk in wall ) with 3.00 mm thick plastic laminated sheet top cover or PVC FRLS board including PVC FRLS top cover with 1.50 sq mm insulated unsheathed PVC FRLS multistranded covered copper conductor for common earth and connecting to earth dolly and making good disturbed surface of wall incl matching the colour of wall/ceiling with extisting wall/ceiling colour all as specified and directed..
--ditto--but for One socket out let 5 Amps 5 Pin on same board with other switch
--ditto--but for One socket out let 5 Amps 5 pin on independent board
--ditto-- but for One light point controlled by two switch two way
All as per item No 2 here in before but with single core multistranded cable of size 2.5 Sqmm and multistanded insulated copper earth continuity conductor of size 2.5 Sq mm all as specified and directed for One socket outlet 15 Amp power point on Independent board.
Material and labour for point wiring for One light /One fan/One call bell point controlled by one switch one way complete with 1.5 sq mm multi stranded copper conductor PVC FRLS insulated unsheathed 1100 Volt grade cable in and include concealed existing concealed PVC/Steel Conduit with 3.00 mm thick plastic laminated sheet top cover or PVC FRLS board including PVC FRLS top cover or Modular sunken box with modular plate and cover with 1.50 sq mm insulated unsheathed PVC FRLS multistranded covered copper conductor for common earth and connecting to earth dolly and making good disturbed surface of wall incl matching the colour of wall/ceiling with extisting wall/ceiling colour all as specified and directed .
--ditto-- but for One socket out let 5 Amps 5 Pin on same board with other switch
--ditto-- but for One socket out let 5 Amps 5 pin on independent board
--ditto--but for One light point controlled by two switch two way
All as per item No 4 here in before but with single core multistranded cable of size 2.5 Sqmm for one 15 Amps socket outlet on independent board and multistanded insulated copper earth continuity conductor of size 2.5 Sq mm all as specified and directed by Engr-in-Charge.
Material and labour for Elect bell AC 230 Volts single phase musical type.
Material and labour for bell push flush type 5 Amps .
S&F switch flush type, 5/6 Amps, single pole, one way, 230 volts AC circuit complete all as specified and directed.
Supply and fixing for switch piano flush type 5 Amps single pole two way.
Supply and fixing for socket out let 2 in 1 multi pin 5 Amps flush type universal
Supply and fixing for switch piano15/16 Amps one way 240 volts
Supply and fixing for socket outlet in repair 2 in 1, 3 pin, 5 and 15 Amps socket outlet 240 volts.
Supply and fixing for stepped type electronic fan regulator flush type on the existing phenolic laminated sheet.
Supply and fixing for Ceiling rose on PVC FRLS board size 65 X 50 mm three terminal Complete.
Supply and fixing for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps.
Supply and fixing for Lamp Holder, PVC FRLS/polycarbonate type with back plate suitable for batten fittings.
Taking down old fittings and fixing Only any type/capacity of LED Tube light fitting with all accessories and necessary connection as specified and directed by Engr-in-charge. Note : LED Tube Light will be issued Under Sch - B
S&F in replacement of Decorative wall light fixture made up of Polycarbonate, of capacity 12W (B-22 base)
Taking down old fittings and Refixing the same servicable any type of light fittings.
Taking down old submain wiring and Supply and fixing for concealed sub main wiring with 2 single core 6 Sqmm copper conductor (Multistandered) in PVC FRLS conduit of suitable size as requivalentuired, PVC FRLS board with all fittings including 4.0 Sqmm copper conductor as earth continuity all as directed. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.
Taking down old submain wiring and Supply and fixing for concealed sub main wiring with 2 single core 4 Sqmm copper conductor (Multistandered) in PVC FRLS conduit of suitable size as requivalentuired, PVC FRLS board with all fittings including 2.50 Sqmm copper conductor as earth continuity all as directed. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.
Taking down old DB and Supply, fixing, connecting & testing sheet metal enclosures powder coated, double door, single pole and neutral, 08 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-43 protection complete all as specified and directed. Make :-Legrand Cat Part No- 5076 11 or equivalent others make as specified. Note : Rates are deemed to be included for flashing in wall concealed complete making good and matching existing surface.
All as per item No 22 above but 12 way DBs Make :-Legrand Cat Part No- 5076 12 or equivalent others make as specified.
Taking down old DB and Supply and fixing double door manufacturer MCB DB TPN 04 way comprising of sheet metal enclosure powder coated fitted with bus bar 415 volts. IP43 protection, rated busbar, pan assembly etc, with interconnection links, blanking plates, cable ties, identification lables incl flush in to wall, necessary cutting to walls etc including two coats of while/colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specifried & directed
Supply and fixing and testing for 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete all as specified and directed.
All as per item No 25 above but for MCB SPN, 40/63 Amp, 240 volts.
Supply and fixing MCB TPN 4 Pole, 415 V, 40 to 100 Amps with breaking capacity 16 KA complete all as specified and directed.
M & L for Earthing complete with GI steel earth plate eletrode 60 cm X 60 cm X 6.0 mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metres below level ground,connected to Gl iron or steel earth wire 4 mm dia (8 SWG) by means of nuts,bolts checks nuts and washers made of Gl iron or steel earth wire protected by Gl iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6:) type C1, pre-cast RCC coverslab 30 cm X30 cm X 10 cm with one lifting handle made of 8 mm dia ms bar funnel wire mesh,20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges,necessary excavation and earth work in any type of soil complete all as shownin electrical plate No 3 of MES schedule part-I and testing after completion. complete all as specified and directed.
Shri Ram Traders Co
M/s. Dhananjay Construction
chhaba construction
M/s Pankaj Enterprises
vinayandsons
LOKESH ELECTRICAL WORKS CONTRACTOR
S.G.ENGINEERING COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .