Annual Maintenance of SnT Assets of Chhal Silo Siding of SECL Raigarh Area for a period of One Year

Percentage in Words

Schedule A1:MANPOWER

Schedule B1:Supply

Schedule B2:Execution

Schedule B3:Consumable items

Schedule B4:Tools & Plants

Schedule B5:Utility of Vehicle

Level of Staff

Accepted Rate

Level of Staff

Accepted Rate

Level of Staff

Description

Schedule A1: Man Power Cost

DESCRIPTION

AMOUNT

Supply of Non-deferiorating type fuse holders and fuse Links - Electric fuse for Railway Signailing rated vollage 240 AC/DC to Spec. No. IRS S.78/92 (IRS-S-78/97 Tentative) IS: 13703 (Part 2/Spc 2): 1983 suitable for Et luse 20 Amps SC-20 Holder Safe Clip/Knife edge type size Et (R-SS) Amp.

Fuse links 10 Amps

Fuse links 6 Amps

Fuse links 2 Amps

Supply of LED Signal unit for main signal for RED/YELLOW/GREEN aspect.

Supply of Dependent type Position light shunt signal unit along with offset bracket , universal lock with key etc.

Supply of Calling ON signal unit along with univeral lock with key etc.

Supply of Relay "QECX61" (ON/OFF ASPECT)

Supply of Relay QN1(CONTECT CONFIGURATION 12F/4B or 8F/8B)

Supply of Relay QNA1(CONTECT CONFIGURATION 12F/4B or 8F/8B)

Supply of Electronic Magneto Telephone desk type

Supply of LED Signal unit for junction type route indicator/shunt/calling on

Electrical point operating machine -IRS Type-143mm Throw with lock and detector sides ,cable termination box etc ,with ground connection.

Electrical point operating machine -IRS Type-220mm Throw with block and detector sides ,cable termination box and clamp ,lock arrangement with ground connection for thick web switches.

Supply of outdoor signalling cable -12 core x 1.5sq mm in drum length of 1 km

Supply of Aluminium Conductor power cable 2 x 25sqmm

Maintenance Free Earth as per RDSO/SPN/197/2008 or latest consisting of ：1) Copper bond steel electrode 3 Mtr long 17mm dia with copper bonding thickness of min.250micron & UL listed & marked-01 No.(2) Earth enhancement compound RDSO Approved in sealed bag of 10 kgs - 03 No.(3) Copper strip 150 x25 x 6mm - 02 No (4) Copper Strip 300 x 25 x 6mm-01 No (5)35 Sqmm Copper Cable to connect earth electrode to MEEB -15Mtr Approx.

Supply of 35 Sq. mm. multistrand single core PVC insulated copper for connecting earth bus bar to earth electrode.

Supply of copper Tape 25x6 mm (Bonding ring conducter) mounted on insulated standoff (1 round)

Supply of 300x25x6 mm Cu equipotential Bus Bar.

Supply of earth electrode assembly as per Drg.No.CR/S&T/SK-815

Supply of Main cable termination rack complete with scaffolding, fixtures & accessaories including square bars for mounting 8-way termina blocks, ladder, string rods, frame, base assembly, insulators, J bolts, nut/bolts & fasteners, backelite sheet, etc. Siemens type and as per extant practice of Central Railway. Typical part list as per Annexure-III and rack arrangement shall be as per sketch No. SK-727 with lates alternation.

Sealed maintenance free VRLA Battery/Cell 2 volt, 300AH IRS: S-93/96 (A)(Amd.1) or latest.

Supply of Thermo shrink Universal Jointing kit for Quad Cable (for straight joints) as per RDSO spec IRS/TC-77/2012 revision 3 With latest Amd

Supply of 2X24 Fiber Optic Splice Straight Joint Enclose (SJC) Complete as per RDSO Specn No. RDSO/SPN/TC/68/2014 Rev 1 AMENDMENT.1

Supply of Apparatus case with godown locks with detachable handle on both the doors.

Single Case as per Drg No SK 783-1 & 2. with latest alternation

Half Case as per Drg No SK 783-1 & 2. with latest alternation

DESCRIPTION

AMOUNT

Installation ,termination ,wiring ,testing and commissioning of point machine including supply of wire ,GL bond pipe insulation sets etc.

Excavation & pulling out the old cable from existing point machine ,insertionof old and additional new cable through GI bend pipe ,wiring ,testing and commissioning of point machine .

Excavation of trenches at the depth of 1.0 mtr depth and 300 mm wide and backfilling the trench after laying of cable along with supply and fixing cable route marker.

Laying of signalling /power/telecom/quad/ofc cable of various size in trench and pipes

Excavation of pit ,casting of concrete foundations for location box -single case ,erection of location box ,supply of universal lock with key lamp holder 2pin with switch,wiring material ,wiring testing and commissioning

Excavation of pit ,casting of concrete foundations for location box -half case ,erection of location box ,supply of universal lock with key lamp holder 2 pin with switch,wiring material ,wiring testing and commissioning

Painting ,letter writing numbering of termination particulars over indoor and outdoor geras at complete station including LC gate

Infringement removal ,Shifting /lifting of existing location boxes/signals/track lead boxes, Junction boxes etc along with foundation to adjacent place to facilitate earth work/clearing infringement etc. at stations including IBH,LC Gates etc.

Deployment of labour for miscalleneous works during cables cuts for jointing trenching works, material shifting etc

Installation of Cable Termination Rack Assembly complete including wall supports, scaffolding, Disconnecting links/ARA terminal, 96 way tag block with tag block cover & other necessary accessories etc. The work shall be done as per approved plan, extant practice on C.Railways & the instructions of Rly engineer at site.

Installation of earth electrode assembly as per Drg.No.RE/S&T/SIG/Tender/SK726/85 including earth wire connected through GI wire 8 SWG supported on M.S. flat of size 6mm x 40 mm to earth electrode as per drg. No.CR/S&T/SK-815 for sigg. Equipment such as lever frames, apparatus case, signals, relay racks, block instruments, and etc. as per RE manual. The earth value should be less than 10 Ohms including the lead wire. The value should be measured in presence of Rly. supervisor. It should be documented and painted on earth enclosure made of concrete.( only earth electrode will be supplied by Railway). All other material required for provision of earthing will be brought by the contractor.

Installation of 25x6 mm copper tape (bonding ring conducters) mounted on insulated standoffs (1 round).

Installation of 300x25x6 mm Cu equipotential Bus Bar.

Splicing (Jointing 2X24 F OFC) and testing of 24 fibre OF Cable and making the splice joint as per direction of site engineer with contractors own splicing machine & tools. Splice loss of each fibre should be less than or equal to 0.05db splice reflectance should be better than 60 db.

Splicing/ dropping/termination of each fiber/pigtail in LIU/IO box/terminal joint through fusion splicing for termination of OFC cables. The fibers terminated shall be tested and test report (hard copy and soft copy) shall be submitted to the Railways site in-charge for records. each fiber shall be properly marked with necessary ferrules/tags, as per following specification: i) The optical fibre cables shall be entered in to the rack through cable entry and using the cable guides. ii) The loosened ends of the fibres and pigtails shall be properly prepared for termination in to the already fixed LIU. iii) Each of the fibre shall be spliced with a pigtail by the method of fusion splicing using a Fusion Splicing Machine of standard reputed make. The splicing shall be done carefully by a skillful person. iv) The splices shall be carefully placed and well secured in the splice trays of the LIU. v) Each fiber / pigtail shall be properly marked with necessary ferrules/tags. vi) The extra length of the fibers / pigtails shall be coiled and placed and secured with cable ties. vii) The optical connectors of the pigtails shall be placed into the patch panel as per the numbering of fibers. viii) All of the terminated fibers shall be tested with OTDR and test report (Hard copy and Soft copy) shall be submitted to the Railways site In-charge for records.

Description

Schedule B2 Execution work

DESCRIPTION

Oil Lubricating

HP Lubricants laal ghoda

Greese

Cotton waste

Kerosin oil

Distilled water

Cartridge Fuse 2A/4A/6A/10A/16A Round head, As per instruction of site in charge

Drill twist 7.2 mm

Hacksaw Blades

Emery cloth grit No 120 size 230mm x280 mm (Pack of 50 Papers)

Emery cloth Grit No 80 grade size 230mm x280 mm (Pack of 50 Papers)

Black paint

Redoxide

Silver paint

Punching Machine DP 52 (Kangaroo)

Stapler 10 Nos.(Kangaroo 10D)

Alpins's/Nail Pins(50 ROLEX)

U Pins (35 mm Rolex) (12 no. per Pkt.)

Binder Clip 15 mm (12 no. per Pkt.)

Binder Clip 19 mm (12 no. per Pkt.)

Binder Clip 25 mm (12 no. per Pkt.)

Binder Clip 32 mm (12 no. per Pkt.)

Binder Clip 41 mm (12 no. per Pkt.)

Binder Clip 51 mm (12 no. per Pkt.)

Ball Pen (Montex-Blue)

Ball Pen (Montex-Black)

Ball Pen (Montex-Red)

Pencil (Apsara-Platinum) 10 Nos per Pkt

Envelope 9x4 White

Envelope 11x5 White

Cello Tape 1/2" x 30 mtr.

White Cello Tape 1" x 30 mtr.

White Cello Tape 2" x 30 mtr.

Brown Cello Tape (Big)

Ajanta Scale 12" (Steel)

Highlighting Set (Faber Castell)

Register 1Q FS (72 Pages)

Register 2Q FS (144 Pages)

Attendance Register

Spiral Pad No.6

Paper Knife (Cutter) (big)

Kent Scissor 6" (big)

A4 Size Paper-75 GSM (500 sheets per pkt.)

Magnifying Glass

Plastic 'L' Folder

Faber Castell Stamp Pad

Fevi stick (Glue stick)-15 (Super)

Eraser (Apsara)

Sharpener (Apsara)

Calmin Sketch pen (Set)- Small

Stapler Pin (Kangaroo 10 1m)

Permanent marker (Faber Castell) (CD-Marker)

Pendrive 16 GB (HP)

Calculator Casio MJ-120T-W

Cartridge compatible for HP Color Leser 150 a,150 nw MFP 178nw

8 SWG GI bonding wire

Diesel for DG

Description

Consumable item

DESCRIPTION

Tools Kit as per List attached ( ONE SET)

Hand drill machine 110V AC bosch/Voltas Make

Greese gun push type superior quality

Office Chair makes Godrej CH-7B or similar of reputed brand.

Office Revolving Chair Godrej Make Model No.9u02r Bravo Or Similar of reputed brand.

Office table with laminated top with three drawers on left hand side and one locker on the right hand side. Olive brown with duplicate keys.Make: Godrej Model T-9 or Similar of reputed brand.

Steel Plain Almirah with 4 adjustable slab Size: 1980mm height, 915 mm width and 485 mm depth. Make: Godrej Storewel Plain Large or Similar of reputed brand.

Ladder Aluminium

Oil Kuppi (Feeder) can 500 ml

Soldering iron 220 v, 50 w Soldran Make

Soldering iron 220 v, 25 w Soldran Make

Measuring tape 30 Mts

Steel measuring tape 15 mts

Steel measuring tape 3 mts

Flat Chisel 175 x 22 mm Taparia

Flat Chisel 150 x 16 mm Taparia

Steel Punch 150 Taparia

Spanner DE set of 12 (6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x27, 25x28, 30x32) Tapria

Taparia Tubular Box Spanner Set 12 pieces with tomy bar

Adjustable Spanner (screw wrench) 12" (305mm) Taparia

Adjustable Spanner (screw wrench) 8" (205mm) taparia

Torx Screw driver 75 mm x 3 mm

Torx Screw driver 150 mm x 3 mm

Torx Screw driver 75 mm x 3.5 mm

Torx Screw driver 150 mm x 3.5 mm

Torx Screw driver 100 mm x 5 mm

Torx Screw driver 150 mm x 5 mm

Torx Screw driver 200 mm x5 mm

Torx Screw driver 200 mm x 6 mm

Torx Screw driver 200 mm x8 mm

Spanner SE open jaw 36mm for point adj.

Combination plier 300 mm ( insulated ) Taparia

Combination plier 210 mm ( insulated ) Taparia

Insulated nose plier 205 mm Taparia

Insulated nose plier 280 mm Taparia

Circlip Plier straight nose 230 mm

Side cutting plier insulated Taparia 205 mm

Hammer with Handle(Ball & Cross pein) 500 gms Taparia

Club Hammer with Handle 1 Kg Taparia

Hacksaw Frame 300mm

Point testing gauge

Digital earth tester Motwani Make Det-20 3 1/2 digit RSR capable to measure min. 0.01 ohms

All in one desktop 11th generation ,core-i5,Ram -8 GB,1TB HDD+256GB SSD,2GB graphics Windows -10 plus ms office (model no - dell inspiron 245400 or Similar )

HP colour Laser MFP 178nw or Similar

Bench Drill machine power operated

Hand drill machine Power operated

Blower cum vaccum cleaner

Supply of Safety Shoes (Buffalo lather) ISI

Safety Jacket orange colour with reflective strips.

Supply of Safety Jacket Green colour with reflective strips.

Safety helmet yellow colour (NEP)

Supply of Safety helmet (NEP)

Supply of hand gloves (Rubber)

Supply of Toolbag canvas

Supply of Hand signal flag Green

Supply of Hand signal flag Red

Supply of Handle for Hand signal flag

Supply of Insulation Tape Red/Black Steelgrip ISI

Supply of Plastic stool Nilkamal 2 feet

Supply of Philips rechargable LED Lantern

Supply of Hands‐free Speakerphone model KX‐T2375MX or Similar

Clamp with padlock

Chain (each 3mtr)

Hand Lamp (red)

Hand Lamp (green)

DESCRIPTIONS

Crimping tools ( Varic Crimp) 0.25-4 Sq.mm

Non insulated flat plier 125 mm

Non insulated side cutter plier 150 mm

Combination plier 200 mm ( insulated )

Wire Stipper ( 0.02-10 Sq.mm)

Insulated nose plier 160 mm

Monkey plier 10"

Screw driver 1.5 Sq.mm

Screw driver 2.5/4 Sq.mm

Insulated screw driver 150x 5 mm

Insulated screw driver 150x 6 mm

Insulated screw driver 150x 8 mm

Insulated screw driver 150x 8 mm

Insulated screw driver 150x 10 mm

Hammer with handle 500 gm

Cable knife 4 "

Flat Chisel 175 x 20 m

Flat Chisel 100 x 10 m

Brass Brush

Test Probe ( Red)

Steel measuring tape

Adjustable screw wrench 6" (155mm)

Adjustable screw wrench 8" (205mm)

Adjustable screw wrench with 10" ( 255 mm)

Solderning iron 220 v, 50/65 w

Element for above

Solder wire 60/40, 18 SWG,500 gm

Tin Cutter

Box spanner 6 mm

Box spanner 6mm

Box spanner 7mm

Box spanner 8mm

Box spanner 9 mm

Box spanner 10 mm

Continuity buzzer

Digital clamp meter

Digital multimeter 4 1/2 Digits 20000 counts, 9 functions , 32 ranges

Megger standard make 150 V & 500 V one each

Tool box of G.I. sheet with Navtal lock.

DESCRIPTION

Hiring of Vehicle: Supply of four- wheeler road vehicle with driver of registration not older than 4 years from the date of submission of tender, having a carrying capacity of 3+1 with Additional Space Back Side for Canying 24 Tools and S&T Gears, all required permissions from road transport authorities of Bolero Camper Gold ZX or Equivalent Model with AC Facilities. N.B.- 1. The Vehicle should be available for 24x7(Around the Clock). 2. Total Km: 3000Km/Per month - The rate quoted are inclusive of fuel/lubrication/repair and maintenance of vehicle, wages of driver, state transport taxes/permit fees, insurance of vehicle etc. 3. The Vehicle should have valid certificates to move on road.

Station

Price

LAXMAN

Description

Hitachi

Description

Statcon

Description

Frauscher