SPL REPAIR TO ENTRANCE ROAD OF CP-07 GATE AT SHIKARGARH AND SPL REPAIR TO INTERNAL ROADS IN UNIT AREA UNDER GE SHIKARGARH AT ARMY AREA JODHPUR

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surface in area not exceeding 400sqm, exceeding 50mm deep and not exceeding 100mm deep and removing the unserviceable materials/ debeirs not exceeding 50m and dispose off complete all as specified and directed

M&L for preparing scarified black top surfaces/ unsurfaced WBM surfaces of roads by brushing with wire brush for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with paving bitumen VG-10/VG-30 grade at the rate of 10 Kg per 10Sqm complete all as specified and directed..

M&L for laying premixed bituminous macadam (using binder not less than 4% by weight of total mix) rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using VG-30 paving bitumen, complete all as specified and as directed.

M&L for Repair to potholes not exceeding 1.0sqm each, depth exceeding 30mm, including sweeping free from dust & mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying a tack coat at 5.0kg per 10sqm, putting in premixed bituminous macadam, well rammed & sealed with binder 9.8kg per 10sqm, blinded with 0.09cum of stone chippings, 6.3mm size & again will rammed (including supply or premixed macadam, binder & chippings) complete all as specified and directed. Note:- Pot holes shall be marked by Engineer-in-charge before commencement of work and the same shall be entered in MB after making good and before laying bituminous carpet.

M&L for preparing black top surfaces of roads by brushing with wire brush for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with paving bitumen VG-10 grade at the rate of 5.0Kg per 10Sqm and laying bituminous premix semi dense asphaltic concrete, 40mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen VG-30 grade mixed in computerized hot mix plant and laid with mechanical paver, rolled and compacted to required camber or gradient using 8 to 12 ton power roller complete all as specified and directed.

M&L for preparing black top surfaces of roads by brushing with wire brush for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with paving bitumen VG-10 grade at the rate of 5.0Kg per 10Sqm and laying bituminous premix semi dense asphaltic concrete, 30mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen VG-30 grade mixed in computerized hot mix plant and laid with mechanical paver, rolled and compacted to required camber or gradient using 8 to 12 ton power roller complete all as directed and specified.

M&L for preparing bituminous road surfaces and marking 2.5mm thick lines, dashes, arrows, letters etc and the like with hot applied Thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F in repairs Solar cat eye aluminum alloy shell (100% water proofing design according to IP65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) and consisting of super bright LED with 10,000 to 18,000 mcd fixed with and including MS stud of suitable size as per manufactures instructions etc. including taking out old unserviceable one complete all as specified and directed

S&F in repairs Cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions including taking out old unserviceable one complete all as specified and directed

S&F in repairs metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomeric 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in 150x150x300mm size PCC 1:2:4, type B1using 20mm graded stone aggregate complete all as specified and directed

S&F in repair Road safety polycarbonate convex traffic mirror 80cm dia, encased in ABS materials, highly visible orange colour/visor for outdoor type, weather proof, brackets with horizontal and vertical angle adjustment fixed in and including 2.10m high and 75mm dia GI pipe as stand, fixed in ground with 60cm x60cm x75 cm PCC block with cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and including necessary form work, earth work excavation, removal of excess soil to a distance not exceeding 50m etc., complete all as specified and directed.

S&F in repairs Retro reflective /Identification sign/ Cautionary / warning sign board of any shape of area exceeding 1.00sqm but not exceeding 1.5sqm with 2 mm thick aluminium composite panel, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01, backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of stainless steel of size 25x25mm and mounted and fixed to a vertical post made of 50 mm dia stainless steel pipe (SS 304 grade) of height 2.00m from natural ground level to top and welded with base plate of size 100x100x5 mm at the bottom end and embedded in ground with 45cm x45cm x60cm PCC block with cement concrete 1:2:4 type B2 using 40mm graded stone aggregate and including necessary form work, earth work excavation, removal of excess soil to a distance not exceeding 50m etc., complete as per drawing , specification and direction of Engineer-in-charge

S&F in repairs Retro reflective /Identification sign/ Cautionary / warning sign board of 90cm equilateral triangle size with 1.5 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01, backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of stainless steel of size 25x25mm and mounted and fixed to a vertical post made of 40 mm dia stainless steel pipe (SS 304 grade) of height 3.00m from natural ground level to top 0.5m embedded in ground with 45cm x45cm x60cm PCC block with cement concrete 1:2:4 type B2 using 40mm graded stone aggregate and including necessary form work, earth work excavation, removal of excess soil to a distance not exceeding 50m etc., complete as per drawing , specification and direction of Engineer-in-charge

S&F in repairs Retro reflective /Identification sign/ Cautionary / warning sign board of size 60cm dia circular shape with 1.5 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01, backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of stainless steel of size 25x25mm and mounted and fixed to a vertical post made of 40 mm dia stainless steel pipe (SS 304 grade) of height 3.00m from natural ground level to top 0.5m embedded in ground with 45cm x45cm x60cm PCC block with cement concrete 1:2:4 type B2 using 40mm graded stone aggregate and including necessary form work, earth work excavation, removal of excess soil to a distance not exceeding 50m etc., complete as per drawing , specification and direction of Engineer-in-charge

S&F in repairs Retro reflective /Identification sign/ Cautionary / warning sign board of size 60x90cm rectangular shape with 1.5 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01, backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of stainless steel of size 25x25mm and mounted and fixed to a vertical post made of 40 mm dia stainless steel pipe (SS 304 grade) of height 3.00m from natural ground level to top 0.5m embedded in ground with 45cm x45cm x60cm PCC block with cement concrete 1:2:4 type B2 using 40mm graded stone aggregate and including necessary form work, earth work excavation, removal of excess soil to a distance not exceeding 50m etc., complete as per drawing , specification and direction of Engineer-in-charge Note for Item No.11 to 15:- Shape/ Design of sign board, letters, symbols, size and fonts of wordings, shall be as per the site requirement and as approved by GE.

Demolition of concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removing from site complete all as specified and as directed.

Demolition of concrete in any description and any position (below or above ground level) and removing from site complete all as specified and as directed.

M&L for 75mm thick plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L for Cement concrete 1:2:4, type B1 using 20mm graded stone aggregate cement concrete as in kerbs or benching, mud stops, rounded or chamfered on edges including necessary form work etc complete all as specified and directed.

S&F in repairs Speed breakers (Road bump) made of ABS plastic, of size 750x250x75mm per piece with two reflectors of size 70mmx23mm on each piece fixed on road surface with appropriate nos of mild steel pins and epoxy adhesive complete all as per manufactures instructions including taking out old unserviceable one complete all as specified and directed.

New Vishvakarma Udhyog

JAGDISH PRASAD & CO