Loading
Loading…
Loading…
Tender Value
₹8.5 L
EMD Value
₹17,000
Closing Date
10 Jun 2026, 3:00 pm4d left
The Executive Engineer, DWS Division, Sabroom
O/o the Executive Engineer, DWS Division, Sabroom
Running Mtc of RWS Schemes Lifting Lowering Rewinding and Repair of various make submersible motors pumps and pump sets at different DTW schemes of Sabroom Sector under Satchand RD Block under DWS Sub Division Sabroom during 2026 27
2026_CEDWS_73456_1
09/EE/DWS/DIVN/SBM/2026-27
Open Tender
Civil Works - Water Works
180 days
Sabroom
Please refer Tender document
8 documents required · 8 mandatory
₹1,000
₹17,000
4 Jun 2026
4 Jun 2026
10 Jun 2026
4 Jun 2026
10 Jun 2026
4 Jun 2026
4 Jun 2026 - 10 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Lifting of submersible pump with delivery assembly by heavy duty chain - pully after dismantling from delivery line and staking properly as per direction of the Engineer-in-charge. | - | no | 1,400 | - | BI01010001010000000000000515BI0100001120 |
| 2 | Labour charge for fitting fixing and lowering of Submersible pump sets with delivery assembly 900 to 00 in/c re-fitting fixing with the delivery line etc as per direction of the Engineer-in-charge. | - | no | 1,800 | - | BI01010001010000000000000515BI0100001121 |
| 3 | Supplying and fitting fixing of following spare parts of approved quality suitable for submersible pump motor etc as per direction of the Engineer-in-charge.
Full threaded nuts & bolts 12 mm dia, 50 mm long. | - | kg | 75 | - | BI01010001010000000000000515BI0100001122 |
| 4 | Supplying and fitting fixing of rubber insertion 3 mm thick of 150 mm dia to the G.I Column pipes as per direction of the Engineer-in-charge. | - | no | 21 | - | BI01010001010000000000000515BI0100001123 |
| 5Providing & fabrication of column pipe including fitting fixing of G.I flange by cutting the GI pipe (conforming to IS:1239 medium class) into 3.05 mtr long and welding the same with GI flange as per specification and direction of the Engineer-in-charge. (G.I pipe will be provided by the agency at his own cost & risk) | ||||||
| 5.1 | i) 100 mm dia G.I pipe with 10 mm thick GI flange | - | no | 5,624.5 | - | BI01010001010000000000000515BI0100001125 |
| 5.2 | i) 80 mm dia G.I pipe with 10 mm thick GI flange | - | no | 4,045.1 | - | BI01010001010000000000000515BI0100001126 |
| 5.3 | iii) 65 mm dia G.I pipe with 10 mm thick GI flange | - | no | 3,323.7 | - | BI01010001010000000000000515BI0100001127 |
| 6Providing and fitting fixing with PVC insulated 3 core flat cable Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge | ||||||
| 6.1 | i) 6.0 sqmm | - | mtr | 446.3 | - | BI01010001010000000000000515BI0100001129 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 3.72 MB
Appendix.pdf
Additional Documents • 0.40 MB
Annexure-II.pdf
Additional Documents • 0.28 MB
Form-7.pdf
Additional Documents • 0.32 MB
BOQ_74753.xls
BOQ • 0.34 MB
DNIT-09.pdf
Tender Documents • 3.13 MB
Download all tender documents and submit your bid