Tender of ARC Work of fabrication from Raw Materials at Kadodara Store under Kadodara Division.

Sub.: Tender of “Work of fabrication from Raw Materials at Kadodara Store under

Kadodara Division."

Sr. Name of Item unit Rate

1 9910000049/ FABRICATION OF ANCHOR ROD FROM 16 SQ.MM MS NO.

9910000050 RAOUD BAR & 65 MM X 65 MM X 6 MM/50 MM X 50 MM

X 6 MM M.S. ANGLE AS PER APPROVED DRAWING AND

REQUIREMENT OF THE COMPANY

2 9910000015 FABRICATION OF EYE BOLT FROM 16 SQ MM MS ROUND NO.

BAR WITH SUPPLYING OF 2 (TWO) NUTS OF SUITABLE SIZE

AS PER APPROVED DRAWING AND REQUIREMENT OF THE

3 9910000028/ FABRICATION OF TURN BUCKLE FROM 16 SQ. MM MS NO.

9910000016 ROUND BAR & 65 MM X 65 MM X 6 MM/50 MM X 50 MM

X 6 MM M.S. ANGLE AS PER APPROVED DRAWING AND

REQUIREMENT OF THE COMPANY

4 9910000030 FABRICATION OF 11' (FEET) LONG TOP/BOTTOM/ D.O. NO.

ANGLE FROM 65 MM X 65 MM X 6 MM M.S. ANGLE AS PER

APPROVED DRAWING AND REQUIREMENT OF THE

5 9910000031 FABRICATION OF 9' (FEET) LONG TOP/BOTTOM/ D.O. NO.

ANGLE FROM 65 MM X 65 MM X 6 MM M.S. ANGLE AS PER

APPROVED DRAWING AND REQUIREMENT OF THE

6 9910000003 FABRICATION OF 4' 6" (FEET) LONG Tapping/bracing angle NO.

FROM 65 MM X 65 MM X 6 MM M.S. ANGLE AS PER

APPROVED DRAWING AND REQUIREMENT OF THE

7 9910000039 FABRICATION OF 2' 3" (FEET) LONG BRACING / SUPPORT NO.

ANGLE FROM 65 MM X 65 MM X 6 MM M.S. ANGLE AS PER

APPROVED DRAWING AND REQUIREMENT OF THE

8 9910000021 FABRICATION OF 11 KV HT 'V' CROSS ARM FROM 65 MM X NO.

65 MM X 6 MM M.S. ANGLE AS PER APPROVED DRAWING

AND REQUIREMENT OF THE COMPANY

9 9910000022 FABRICATION OF 11 KV HT TOP FITTING FROM 65 NO.

MM X 65 MM X 6 MM M.S. ANGLE AND 50 MM X 6 MM

M.S. FLAT AS PER APPROVED DRAWING AND

REQUIREMENT OF THE COMPANY

10 9910000055 FABRICATION OF 22 KV HT TOP FITTING FROM 65 MM X NO.

65 MM X 6 MM M.S. ANGLE AND 50 MM X 6 MM M.S.

FLAT AS PER APPROVED DRAWING AND REQUIREMENT OF

11 9910000037 FABRICATION OF 22 KV HT 'V' CROSS ARM FROM 65 MM X NO.

65 MM X 6 MM M.S. ANGLE AS PER APPROVED DRAWING

AND REQUIREMENT OF THE COMPANY

12 9910000041 FABRICATION OF GUY CLAMP PAIR SUITABLE FOR PSC POLE PAIR

FROM 50MM X 6 MM M.S. FLAT AS PER APPROVED

DRAWING AND REQUIREMENT OF THE COMPANY

13 9910000024 FABRICATION OF 'U' CLAMP FROM 50MM X 6 MM M.S. NO.

FLAT AS PER APPROVED DRAWING AND REQUIREMENT OF

14 9910000043 FABRICATION OF 'C' CLAMP SUITABLE FOR PSC POLE FROM NO.

50MM X 6 MM M.S. FLAT AS PER APPROVED DRAWING

AND REQUIREMENT OF THE COMPANY

15 9910000044 FABRICATION OF 'C' CLAMP SUITABLE FOR RSJ GRIDER NO.

POLE FROM 50MM X 6 MM M.S. FLAT AS PER APPROVED

DRAWING AND REQUIREMENT OF THE COMPANY

16 9910000056 FABRICATION OF THREE HOLE PATTI FROM 50MM X 6 MM NO.

M.S. FLAT AS PER APPROVED DRAWING AND

REQUIREMENT OF THE COMPANY

17 9910000061 FABRICATION OF 11' (FEET) LONG TOP/BOTTOM/CHANNEL NO.

FROM 100 MM X 50 MM X 6 MM M.S. ANGLE AS PER

APPROVED DRAWING AND REQUIREMENT OF THE

18 9910000060 FABRICATION OF 9' (FEET) LONG TOP/BOTTOM/CHANNEL NO.

FROM 100 MM X 50 MM X 6 MM M.S. ANGLE AS PER

APPROVED DRAWING AND REQUIREMENT OF THE

19 9910000035 FABRICATION OF 11' (FEET) LONG ANGLE BRACING FROM NO.

50 MM X 50 MM X 6 MM M.S. ANGLE AS PER APPROVED

DRAWING AND REQUIREMENT OF THE COMPANY

20 9910000034 FABRICATION OF 9' (FEET) LONG ANGLE BRACING FROM NO.

50 MM X 50 MM X 6 MM M.S. ANGLE AS PER APPROVED

DRAWING AND REQUIREMENT OF THE COMPANY

21 9910000062 Fabrication of 11’ (Feet) Long Channel welded from NO.

assorted length of sceap channel as per approved

REQUIREMENT OF THE COMPANY

22 9910000063 Fabrication of 9’ (Feet) Long Channel welded from NO.

assorted length of sceap channel as per approved

REQUIREMENT OF THE COMPANY

23 9910000072 FABRICATION OF GUY CLAMP PAIR SUITABLE FOR 10 MTR PAIR

PSC POLE FROM 50MM X 6 MM M.S. FLAT AS PER

APPROVED DRAWING AND REQUIREMENT OF THE

24 9910000073 FABRICATION OF GUY CLAMP PAIR SUITABLE FOR 9/11 PAIR

MTR RSJ GIRDER POLE FROM 50MM X 6 MM M.S. FLAT AS

PER APPROVED DRAWING AND REQUIREMENT OF THE

25 9910000066 Fabrication of 5’ (Feet) Long Tapping Angle from 65 mm x NO.

65mm x 6 mm M.S. angle as per approved REQUIEMENT

26 9910000067 Fabrication of H.T. Ext’n Suitable for 22 KV system from 65 NO.

mm x 65mm x 6 mm M.S. angle as per approved

REQUIREMENT OF THE COMPANY

27 9910000068 Fabrication of H.T. Ext’n Suitable for 11 KV system from 65 NO.

mm x 65mm x 6 mm M.S. angle as per approved

REQUIREMENT OF THE COMPANY

28 9910000069 Fabrication of 750 mm long Channel for HT AB conductor NO.

from 100mm x 50 mm x 6 mm M.S. Channel as per

approved REQUIEMENT OF THE COMPANY

29 9910000070 FABRICATION OF 22 KV HT 'V' CROSS ARM FROM 100 MM NO.

X 50 MM X 6 MM M.S. CHANNEL AS PER APPROVED

DRAWING AND REQUIEMENT OF THE COMPANY

Total Estimated Cost 10,00,000/-

Total Estimated amount:TEN LAKHS RUPEES only (Excluding GST)

Ex. Engineer (O&M)

DGVCL, Kadodara Division

TERMS &CONDITION OF CONTRACT

1. Conditions given in company’s booklet tender &contract for works’ will be applicable to

this order and all the conditions enumerated therein will be binding to you.

2. You have to carry out work at KADODARA DIVISION (O&M) Dn or Place will be

given by undersign.

3. Electrical connection may be taking at your cost and risk.

4. All fabrication items should be applied with double coat of ISI Mark Red oxide paint at

5. Eye bolt should be supplied with two nuts at your cost.

6. We have adopted standard weight only for considering conversion of raw materials.

7. All the terms and condition of tender and contract for works booklet are applicable to

8. You have to carry out the works as per the terms and condition specified in work order.

Ex. Engineer (O&M)

DGVCL, Kadodara Division