Construction of additional accommodation to HPPWD Rest House at Sundernagar Distt. Mandi (HP)

Amount

Excavation in foundations, trenches etc.in earth work in all kinds of soil such as pick work, jumper work, blasting work, saturated soil , including chieslling or any other mixed variety of soil, dewatering and or removal of slush and other incidentals, lift up to any heights, stacking the excavated soil upto any leads clear from the edge of excavation and then returning the stacked soil in 15 cm ( fifteen centemetre) layer when required in to plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete 1:4:8 (one cement: four sand: eight graded stone aggregates 40mm (forty millimetre) nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Boulder filling dry hand packed tightly under floor including carriage of materials with in all leads, lifts and other incidentals.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing form work with steel plates 3.15mm ( three point one five millimeter) thick welded with angle iron in frame 30x30x5mm (thirty X thirty X five millimeter) so as to give a fair fInish including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all height / depth of propping and centring below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in:

Foundation footing and basis of columns etc. and mass concrete including plinth beams and columns upto plinth level including carriage of materials with in all leads, lifts and other incidentals.

Columns, Pillar posts and struts, square, rectangular or polygonal in plan in all floor level including carriage of materials with in all leads, lifts and other incidentals.

Stair case with slopping or stepped soffits , excluding landing but including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Beams, cantilevers, girders and lintels, side and sofits of beams, beam haunchings cantilevers girders bressumers and lintels upto any depth / length depth in all height in all floor level including carriage of materials with in all leads, lifts and other incidental complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. upto all thickness including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying reinforced cement concrete design mix M-25 ( twenty five ) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforecement for reinfoced cement concrete work . The mix shall be designed as per requirement of I.S code and PWD specification . The design mix will be got approved from the Engineer - in - charge prior to the casting . The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code .

Foundation, footings, bases of columns and the like and mass concrete including carriage of materials with in all leads, lifts and other incidentals.

Column ,Pillars. Post and struts etc . in all floor level including carriage of materials with in all leads, lifts and other incidentals.

Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing up to all floor level including carriage of materials with in all leads, lifts and other incidentals.

Suspended floor roofs, landing and shelves and their supports balconies beams, girders , bressumers and cantilevers upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillastersb buttresses, plinth and string courses and the like including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying reinforced cement concrete design mix M-20 ( twenty ) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforecement for reinfoced cement concrete work . The mix shall be designed as per requirement of I.S code and PWD specification . The design mix will be got approved from the Engineer - in - charge prior to the casting . The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code in Moulding as in cornices, window sills etc. not exceeding 15cm.( fifteen centimatre ) in girth including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position including cost of binding wire complete upto all floor level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Precast concrete block masonry (including quion blocks,jamb blocks, closer etc.) with solid concrete blocks of approved size made of cement concrete 1:5:10 ( (one cement: five sand: ten graded crushed stone aggregate 40mm( forty millimetre ) and down gauge) foundation plinth and super structure upto floor all level in Cement Mortar 1:6 ( one cement : six sand ) including carriage of materials with in all leads, lifts and other incidentals.

Precast concrete block masonry in partition walls 10 cm.( ten centimetre) thick with solid block of approved size including quion blocks, jamb blocks, closer etc. made of cement concrete 1:3:6 (one cement:three sand:six graded crushed stone aggregate 40mm( forty millimetre ) and down gauge) in Cement Mortar 1:6 ( one cement : six sand ) including carriage of materials with in all leads, lifts and other incidentals.

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position 1st class deodar wood including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing factory made uPVC white coloure sliding glazed window upto 1.50 mm (one point fifty millimeter ) height dimension comprISIng of uPVC multi- chambered frame with in - built roller track and sash extruded profiles duty reinforced with 1.60 + 0.2 mm ( one point sixty + zero point two millimetre ) thick galvanized mild steel section made from roll forming process of required length ( shape & size according to uPVC profile) appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket , wool pile , zinc alloy ( white powder coated ) touch locks with hook, zinc alloy body with single nylon rollers ( weight bearing capacity to be 40 ( forty ) kg ) G.I fasteners 100 x 8 mm ( one hundred x eight mellimetre ) size for fixing frame to fISInhed wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred and fusion welded at all corners , including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent fISInhed wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality , all complete as per approved drawing & direction of Engineer in - charge ( single / double glass panes , wire mesh and silicon sealent shall be paid separately ) including carriage of material within all leads, lifts and other incidentals. Note:- For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable . Three track three panels sliding window with fly proof S.S wire mesh (two nos glazed & one No. wire mesh panels) made of big series) frame 116 x 45 mm ( one hundred sixteen x forty five millimeter ) & sash 46x62 mm ( forty six x sixty two millimeter ) both having wall thickness of 2.3 + 0.2 mm ( two point three + zero point two millimeter ) and single glazing bead / double glazing bead of appropriate dimension ( area of window above 1.75 sqm ( one point seventy five square metre ).

Providing and fixing flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters 35 mm ( thirty five millimetre ) thick including black enamelled M.S. butt hinges including carriage of material within all leads, lifts and other incidental .

Providing and fixing glazing with 5 mm ( five millimetre ) thick toughend glass in door, window, ventilator shutters & partition etc with PVC/neoprens gasket etc and other fitting. complete including carriage of material within all leads, lifts and other incidental .

Providing and fixing 12mm( twelve millimetre ) thick tough hard glass in partitions etc. Complete as per the architectural drawing and direction Engineer- in- Charge including carriage of material within all leads, lifts and other incidental .

Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge designation 140 g ( one hundred forty gram ) with wire of dia 0.71 mm ( zero point seven one millimetre ) to windows and clerestory windows including carriage of material within all leads, lifts and other incidental .

Providing and fixing 19mm ( nineteen millimetre ) thick Commercial Board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete) including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 19mm ( nineteen millimetre ) thick Commercial Board water proof shutters for cup boards in selves/ box including fixing with butt joints & fixing with nail and screws etc complete) including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 6 mm ( six millimetre thick commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately) including carriage of material within all leads, lifts and others incidental .

Providing and fixing 1.00mm (one millimetre) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of material within all leads, lifts and others incidental .

Providing and fixing square edges cover fillets (beading) 19mmx6mm ( nineteen x six millimetre ) section including mitring at junctions with wood screws and nails complete.1st class deodar wood including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 100 mm ( one hundred millimetre ) bright finished brass handles with screws etc. complete. including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing bright finished brass ball catcher 100 mm( one hundred milimetre ) dia including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 300 x16xmm ( three hundred x sixteen millimetre ) anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 250x10 mm ( two hundred fifty x ten millimetre ) aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 125 mm (One hundred twenty five millimeter) aluminum handles anodized transparent or dyed to required shades and color with screws etc. complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 100mm ( one hundred millimetre ) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

25 mm( twenty five millimetre ) cement concrete flooring 1:2:4 (one cement: two sand : four graded stone aggregate of size 12.5 mm( twelve point five millimetre ) and below) laid over base concrete and finished with a floating coat of neat cement (base concrete to be paid saparately) including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing & fixing 8mm( eight millimetre ) thick HDF flooring manufactured of approved shade & colour in flooring, treads of steps & landings laid 3mm( three millimetre ) thick profile required complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing & fixing 15mm ( fifteen millimetre ) thick anti exterior grade skid water proof stain & impect resistent heavy duty vetrified tiles Nitco or equivalant 450x450mm ( four hundred fifty x four hundred fifty millimetre ) manufactured of approved shade & colour in flooring, treads of steps & landings laid over 12mm ( twelve millimetre ) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 10mm( ten millimetre ) thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600 x 600mm x 10 mm ( six hundred x six hundred x ten millimetre ) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm ( twelve millimetre ) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying spartic ceremic tiles 5.5mm ( five pont five millimetre ) thick in flooring (300 x300mm. ( three hundred x three hundred millimetre ) size treads of steps laid on a bed of 12mm. ( twelve millimetre ) thick cement mortar 1:3(one cement: three sand) finished with flush pointing in white cement including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying granite stone in flooring 20mm ( twenty millimetre ) (average) thickness base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm ( twenty millimetre ) thick including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 1st class deodar wood with 25mm ( twenty five millimetre )thick jamb lining with necessary screws, priming coat on unexposed surface etc, complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying Full Body vetrified tiles 600X600 mmx10mm ( six hundred x six hundred x ten millimetre ) in grey/coloured of required shade in skirting risers of steps and dados on 12mm ( twelve millimetre ) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying 300X600 mm ( three hundred x six hundred millimetre ) in Digital Ceramic tiles on wall skirtting in room laid on 12mm ( twelve millimetre ) thick cement mortar 1:3(one cement: three sand) finished with flush pointing in white cement.mixed with pigment of required shade to match the shade of tiles including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying granite stone in skirtting 20mm( twenty millimetre ) (average) thickness base of cement mortar 1:3 (one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete. 20mm ( twenty millimetre ) thick including carriage of materials with in all leads, lifts and other incidentals.

Furnishing outer wall with Glass Rainfored (GRC) tiles clading base of cement mortar 1:3 (one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete. 20mm ( twenty millimetre ) thick including carriage of materials with in all leads, lifts and other incidentals.

15mm ( fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm ( eighty millimetre) in girth and finished even and smooth. Cement Mortar 1:4 ( one cement: four sand) including carriage of materials within all leads , lifts of material and other incidentals .

6mm ( six millimetre) thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand) as per specification as per direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals..

Providing and fixing 0.60mm ( zero point sixty millimetre ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheetwith top coat of regular modifiedpolyster (RNP) organic coating of 20( twemty ) microns over 5 ( five ) microns primercoating to back coat of polyster of 5( five ) microns over 5 ( five) microns primercoating including fixing with prepainted iron Jor L hooks, bolts and nuts 6mm ( six millimetre ) diametre withprepainted limpet andrubber washers complete with allaccesoriees as required as per thedirection of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing prepainted sandwhich steel sheet in roofing withtop skin of 0.60mm ( zero point sixty millimetre ) thick sheet with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 ( twenty ) microns over 5( five ) microns primer coating to back coat of polyster of 5( five ) microns over 5( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm ( six millimetre ) dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm ( one point sixty six millimetre to two millimetre ) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 0.63mm ( zero point sixty three millimetre ) thick sheet. 15 cm. ( fifteen centimetre ) wide 45 cm. ( forty five centimetre ) overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm ( four x three millimetre ) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing ridges or hips 60cm(sixty centimetre) overall with 0.60 mm(Zero point sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polister organic coting of 20( twenty ) microns over 5 (five) microns primer coating + back coat of polister of 5(five) microns over 5(five ) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm( six millimetre ) dia with prepainted G.I. limpet and bitumen washer complete with all accessories as required as per direction of Engineer- in- charge including carriage of material within all leads, lifts and other incidental charges .

Providing and fixing valley 60 cm ( sixty centimetre ) overall with 0.60mm ( zero point sixty millimetre ) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5( five ) microns over 5 ( five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm( six millimetre ) dia with screwa prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental charges .

Providing and fixing flushing 38cm ( thirty eight centimetre ) overall with 0.60mm ( zero point sixty millimetre ) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20( twenty ) microns over 5 (five) microns primer coating + back coat of polyster of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm ( six millimetre ) dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Providing and fixing GI clip in Metal ceiling system of 600 x 600 mm(six hundred x six hundred millimetre ) module which includes providing and fixing 'C' wall angle of size 20x30x20 mm ( twenty x thirty x twenty millimetre) made of 0.5 mm ( zero point five millimetre) thick prepainted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm( three hundred millimetre ) centre to centre , suspending the main C carrier if size 10x38x10mm ( ten x thirty eight x ten millimetre ) n made of G.I steel 0.7 mm ( zero point seven millimetre ) thick from the soffit with of soffit cleat 37x27x25 x 1.6 mm ( thirty seven x twenty seven x twenty five x one point six millimetre ) , rawl plugs of size 38x12mm ( thirty eight x twelve millimetre) and C carrier suspension clip and main carrier bracket at 1000mm ( one thousand millimetre ) c/c , Inverted triangle shaved spring tee height of 24mm ( twenty four millimetre ) and width of 34mm( thirty four millimetre ) made of G.I steel 0.45 mm( zero point forty five millimetre ) thick is then fixed to the main C carrier and in direction perpendicular to it at 600mm ( six hundred millimetre ) centers with help of suspension brackets , Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 ( one hundred twenty) gms/sqm (both side inclusive), fixing with clip in tiles into spring ‘T’ with. GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm ( six hundred x six hundred and zero point five millimetre ) thick with 25 mm ( twenty five millimetre ) height, made of G I sheet having galvanizing of 100( one hundred ) gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 ( sixty)microns (minimum), including factory painted after bending. including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Steel work welded in built up sections, trusses and framed work including cutting, hosinting fxing in position and applying a priming coat of red lead paintIn beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like. including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm ( four point five kilogram per square metre) including filling the joints with approved adhesive complete 100mm ( one hundred millimetre ) dia pipes complete as per specification asper direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete complete as per specification asper direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals.

Plain bend 100mm ( one hundred millimetre ) dia

Plain Shoe 100mm ( one hundred millimetre ) dia

PVC Clamp 100mm ( one hundred millimetre ) dia

Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler including carriage of materials with in all leads, lifts and other incidental

Applying a birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust,loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/ stone/ plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Distempering(two coat) with oil bound washable distemper of approved brand and manufacture of required shade and undecorated wall surfaces to give an even shade over and including priming coat with alkali resistant primer of approved brand and manufacture after thoroghly brushing the surface free from mortor dropping and other foriegn matter and also including preparing the surface even and sand papered smooth including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting. Ready mixed paint brushing wood primer pink complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than white including curing complete and carriage of materials with in all leads, lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Painting two coats (excluding priming coat) on new steel and other metal surfaces, with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter with enamel paint other than white complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing under layer for plinth protection of 75mm ( seventy five millimetre ) thick (unconsolidated) bed of dry brick/stone aggregated 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of materials with in all leads, lifts and other incidental

Providing plinth protection 50mm thick in cement concrete 1:3:6 (one Cement : three Sand : six graded stone aggregated 20mm( twenty millimetre ) nominal size including carriage of materials with in all leads, lifts and other incidental.

Providing and fixing 25mmX25mm( twenty five x twenty five millimetre ) teak wood moulding corner (beading) including mitring at junctions with wood screws and nails complete including carriage of materials with in all leads, lifts and other incidental .

Providing and fixing stainless steel ( Grade-304) railing made of hollow tubes, channels, plates etc. Including welding , grinding , buffing , polishing and making curvature ( wherever rerquired0 and fitting the same with necessary stainless steel nuts and bolts complete , including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts. etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including carriage of materials with in all leads, lifts and other incidental .

WS and SI Providing and fixing20 mm (twenty millimetre) nominal bore. to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall. 1620 (20 mm ( twenty millimetre ) OD pipe including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals charges in all respect as per direction and Satisfaction of Engineer- in- charge .

Equal Tee 1620 mm ( one thousand six handred twenty millimetre)

Female branch Tees 1620 x 1620 x 20 mm ( one thousand six handred twenty x one thousand six handred twenty x twenty millimetre) thread.

Female elbows 1620 x 20 mm ( one thousand six handred twenty x twenty millimetre) thread.

Male thread connector:-1620 x20 mm ( one thousand six handred twenty x twenty millimetre) thread.

Female thread connector:-1620x 20 mm( one thousand six handred twenty x twenty millimetre) thread.

Couplers 1620 mm ( one thousand six handred twenty millimetre)

Making connection of galvanined mild steel dintribution branch with galvanined mild steel main 20mm to 40mm (twenty millimetre to forty millimetre ) nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 1000 (one thousand liters) net capacity PVC water storage tank of ISI 12701 marked, G.I. Inlet and outlet connection , 15 mm ( fifteen millimetre ) nominal bore ball valve and mosquito proof PVC cover with locking arangement including hoisting up to all heights above ground level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing vitreous China two piece WC seat for coupled WC AR3 - WHT- 39515 with PP soft use seat cover , hinges fixing accessories set and accessories set of size 375 x800 mm (three hundred seventy five x eight hundred millimetre ) S- trap 250mm ( two hundred fifty millimetre ) of Jaguar or equivalent make complete as per direction of Engineer - in- Charge including carriage of materials with in all leads, lifts and other incidental. complete as per direction of Engneer - in- Charge including carriage of materials with in all leads, lifts and other incidental

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) wall mounted W.C Jaguar make Cat No - LYS -WHT-38951 with cistern including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) (Seat and over to be measured and paid for separately) Ordinary closet including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers white plastic seat and cover including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous China wash basin with pedestal single hole for pillar tap with C.I. or M.S.brackets painted white including cutting holes and making good the same but excluding fittings .(Jagara Make Table top Cat No.VGS-WHT-91931No of size 600x385x195 mm( six hundred x three hundred eighty five x one hundred ninety five millimetre ) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings flat back 550mmx400mm ( five hundred fifty x four hundred millimetre ) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material within all leads , lifts of material and other incidentals .

150mm ( one hundred fifty millimetre ) dia.

110 mm ( one hundred ten millimetre ) dia.

75 mm ( seventy five millimetre )dia.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm ( three millimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material within all leads , lifts of material and other incidentals .

150mm ( one hundred fifty millimetre ) dia.

110 mm ( one hundred ten millimetre ) dia.

75 mm ( seventy five millimetre )dia.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material within all leads , lifts of material an

150mm ( one hundred fifty millimetre ) dia.

110 mm ( one hundred ten millimetre ) dia.

75 mm ( seventy five millimetre )dia.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals charges

150mm ( one hundred fifty millimetre ) dia.

110 mm ( one hundred ten millimetre ) dia.

75 mm ( seventy five millimetre )dia.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals .

150mm ( one hundred fifty millimetre ) dia

110mm ( one hundred ten millimetre ) dia

75mm dia ( seventy five millimetre )

Providig and fixing 110 x 75 mm ( one hundred ten x seventy five millimeter) PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials with in all leads, lifts and other incidentals charges in all respect as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing 610 x 510 mm ( six hundred ten x five hundred ten millimetre ) with bowl depth 200 mm (two hundred millimetre ) stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials with in all leads, lifts and other incidentals charges in all respect as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing 32 mm( thirty two millimetre ) dia C.P. Brass waste for wash basin or sink including carriage of materials with in all leads, lifts and other incidentals

Providing and fixing 600mm x 450 mm( six hundred x four hundred fifty millimetre ) bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. including carriage of materials with in all leads, lifts and other incidentals

Providing and fixing stainless steel Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws 600 x 10 mm ( six hundred x ten millimetre ) ( Jaquar make AKP -35741P) including carriage of materials with in all leads, lifts and other incidentals

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws 600 x 20 mm ( six hundred x twenty millimetre ) ( Jaquar make AKP -35741P) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 600mm x 120 mm ( six hundred xone hundred twenty millimetre ) glass shelf with stainless steel and guard rail complete, fixed to wooden plugs with C.P. Brass screws CAN- CHR073 including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 600mm x 120 mm ( six hundred x one hundred twenty millimetre )glass shelf withC.P.Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing wall mixing faucet for shower and bath with overhead pipe and bath shower ( Jaquar make CON- 273 KUNPR) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing wall mixing faucet for shower and bath with overhead pipe (1210 cm )

Providing and fixing one hole basin mixing Faucet ( Jaquar make CON- 167 KNB ) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing one hole basin mixing faucet including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm( fifteen millimete ) mixer for kitchen sink with top / bottom swinging spout. including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm( fifteen millimete )C.P bib tap( long body) with Capstan head ( Jaquar make CON- 037 KN ) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm ( fifteen millimete ) C.P brass bib tap with capstan head including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm ( fifteen millimetre ) C.P. brass angle valve with Flanges without Nuts and pipe .including carriage of materials within all leads and lifts.(Jaquar make CON-053 KN) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm ( fifteen millimetre )C.P. brass angle valve without Nuts and pipe including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 20 mm ( twenty millimete ) brass full way valve with wheel including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 32 mm ( thirty two millimete ) PVC waste pipe including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PTMT jet spray of approved quality and colour with 1.00 mtr. ( one metre ) Tube as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals .

Providing and fixing 15mm( fifteen millimete ) P.V.C connection with brass unions including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100 mm ( one hundred millimetre ) dia C.P. gratings including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing charomium plated soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws etc. complete (Jaquar make cat no:- AHS-CHR-1531) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing wall mixing rain head bath shower (Jaquar make cat no:- AHS-CHR-1531) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing toilet paper holder (Jaquar make cat No:- AKP-35753P) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PTMT toilet paper holder of approved quality and colour with steel screws and rawal plugs etc including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing chromium plated towel ring with C.P. brass brackets fixed to wooden cleats with C.P. brass screws etc. complete (Jaquar make cat no:- AQN-7721) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 5005 urinal plat back 670 x335x365xmm ( six hundred seventy x three hundred thirty five x three hundred sixty five millimetre ) Sera or its equivalent alongwith spreaders galvanised steel flush pipe and spreaders with brass unions and G.I. clamps complete, including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260mm x 350 and 340x430x265mm ( four hundred thirty x two hundred sixty x three hundred fifty and three hundred forty x four hundred thirty x two hundred sixty five millimetre ) sizes, respectively with automatic flushing cistern with fittings R.S or C.I. Brackets standard size galvanised steel flush pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and G.I. clamps complete, including painting of cistern and fittings, cutting and making good the walls, floors where required one urinal basin with 5 litres C.I. automatic flushing cistern including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing Division Plate for Urinals 600 x 300 mm ( six hundred x three hundred millimetre ) Vitreous China including carriage of materials with in all leads, lifts and other incidentals.

Constructing manhole with RCC top slab 1:2:4 mix ( one cement : two sand :four graded crushed stone aggregate 20mm ( twenty millimetre ) nominal size ) foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm ( forty millimetre ) nominal size) and inside plastering 15mm ( fifteen millimetre ) thick with cement mortar 1:3 (one cement three sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( one cement two sand :four graded stone aggregate 20mm ( twenty millimetre ) nominal size ) finished smooth complete including curing and testing . Inside size 800mm x800mm x 500mm (eight hundred x eight hundred x five hundred millimetre ) deep including C.I cover with frame (light duty single seal pattern -1) 455 x610mm ( four hundred fifty five x six hundred ten millimtre ) internal dimensions total weight of cover and frame to be not less than 38kg. ( thirty eight kilogram ) (weight of cover 23 kg (twenty three kilogram ) of frame 15kg (fifteen kilogram)

With 200mm (two hundred millimetres ) thick walls of brick masonary using common brunt clay building bricks approved quality in cement mortar 1:3 (one cement : three sand .) complete in all respect including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing Tooth brush and Tumbler holder of Jaquar make or its equivalent including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing Tooth brush and Tumbler holder including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing C.P towel rack of approved quality and colour with steel screws and rawal plugs etc complete including carriage of material within all leads , lifts of material and other incidentals .

Suket Construction Co. Pvt. Ltd.