Setting up of Janakeeya Matsya Krishi (JMK) Cell with Record Room at the Directorate of Fisheries, Thiruvananthapuram

Amount

Civil Work

od198383/2022_2023 : Supply and Installation of Storage in the size of 120x40x120 cm with swing door and lock. Storage made of 18 mm Pre- Laminated Particle board

od198436/2022_2023 : Supply and Installation of Storage in the size of 180x40x106 cm with Swing door and lock. Storage made of 18mm pre- Laminated particle board.

od198606/2022_2023 : Dismantling the existing plywood partition and wooden racks in the Record Room and cleaning the Record Room that is contaminated with the faeces of birds

9.105.1 : Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS : 2095 : part I

12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

13.88 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od212079/2022_2023 : Providing and fixing Automatic heavy duty hydraulic double-speed alloy door closer suitable for right and left hand opening doors, mounting on door panel or door frame with double speed adjustment with necessary accessories and screws, etc.

od201152/2022_2023 : Supply and installation of door frame of size 90cmx210cmx12.5 cm made of Anjili/jack wood

od201154/2022_2023 : Supply & installation of partition door with 5" hinges, door handle, door lock and tower bolt using 32mm particle board with laminate and glass

od201155/2022_2023 : SOFA SET (Single Seater-3nos & Two Seater-2no): Leatherette, High Backrest, Tufting Design Element, Plush Armrest, Super Soft Cushions, Solid wood Frame Construction

od201160/2022_2023 : Supply and installation of Center Table of size 100 cm x 50 cm x 42 cm using 19mm laminated particle board or solid wood

od201163/2022_2023 : Supply and installation of GRAVITY BASED WATER PURIFIER, UF technology based, non-electric and chemical free, counter top type with 2 litre storage, transparent tank made of ABS food-grade plastic, including bottom tank, top tank, bottom stand, top cover, top lid and tap.

od201183/2022_2023 : Providing and fixing vertical blinds with custom cut to size including frame and wherever necessary to complete.

15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

11.49.2 : Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tiles 600x600 mm

od201185/2022_2023 : Providing Laminate Cladding in the the exterior and interior of the proposed gypsum partition using 1mm laminate board

od203285/2022_2023 : Laminating the outer door & covering of the existing wall-shelf of size 163cm X 240cm using 18mm pre-laminated particle board

od210192/2022_2023 : Dismantling the aluminum partition before floor tiling and re-installation of the partition after tiling.(Rates are excluding tiling cost)

Electrical Work

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.28.1 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

1.28.2 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

1.28.4 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module

1.28.5 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

90.6.4.2 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

90.10.1.2 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.3 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.5 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.6 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.7 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

od204039/2022_2023 : Supply , installation, testing & commissioning of the following 15W LED Lights Square AP Plus UltraGlow LED DL Recessed LED Panel Ceiling Light for use on 240 V AC supply and all other accessories required for fixing etc. complete of good quality and approved make as required at site

od204049/2022_2023 : Supply and installation of Inverter type Split AC 1 ton 3star approved by the site engineer in charge. Make:LG/Bluestar/ Voltas ).

od204071/2022_2023 : STABILIZER: Supply , installation, testing & commissioning of 4 KVA V-Guard Automatic Voltage Stabilizer and all other accessories required for fixing etc. complete of good quality and approved make as required at site.(LMR) (Brand : V GAURD/standard make)

1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.55.1 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A

od207748/2022_2023 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required<br>2 X 4 sq. mm + 1 X 1.5 sq. mm earth wire

od207793/2022_2023 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required<br>2X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire

od207749/2022_2023 : Supply , installation, testing & commissioning of the following 20W LED Tube Lights Set for use on 240 V AC supply and all other accessories required for fixing etc. complete of good quality and approved make as required at site.

od207797/2022_2023 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.<br>9 Module

od208406/2022_2023 : supply and installation of 1200 mm sweep ceiling fan of standard make as approved by the site engineer in charge (LMR)

od208096/2022_2023 : Supply and installation of fan rod approved by the site engineer in charge.

Mobile Compactor

od206179/2022_2023 : Compacter should be build using High- Quality Steel as per IS Standard .The Chassis frame made out of ISMC 75 x 40 channels,The Chassis, after pre-treatment, one coat red oxide and one coat of paint finish.Driving Mechanism: Movements of the unit to be achieved by chain drive type with control wheel (mounted on each double movable unit) and fixed at a suitable height. Each movable undercarriage with antifriction Cast iron wheels with ball bearings housing . Mechanism box made out of 1 mm thick sheet. Rail bar to be grouted at the time of erection of mobile unit with Anchor bolts.Manually operated safety stopper are provided .A centralized locking arrangement is to be provided .Moving of each rack will be with the help of handle at suitable height.(Mobile File Storage System <br>(4640mm L X 2700mm D X 2420mm Ht)<br>1 SFSU + 4 DFMU + 1 SFMU<br>6 Panels with 5 Loading Level Leaf Door :- 900 L x 2420 Ht - 3 Sets)<br>

Lifeline Group of Companies

Invobuild Infratech Pvt Ltd.

Bidder Name

Lifeline Group of Companies

Namaste Innovations

Invobuild Infratech Pvt Ltd.