Construction of Community Skill Park and Administrative Block for ASAP at Kazhakkoottam Thiruvananthapuram

Amount

COMMUNITY SKILL PARK

CIVIL WORKS

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

od143809/2019_2020 : Extra for additional lead upto 1km

od144189/2019_2020 : Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or at contractors risk, for all leads including all lifts involved.

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

od143824/2019_2020 : Supplying and filling in plinth with stone dust(quarry dust) under floors, including watering, ramming, consolidating and dressing complete.

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

2.34.1 : Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%

2.35.3.1 : Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.17 : Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

4.13 : Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

5.37.1 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All wiork upto plinth level

5.37.2 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All work above plinth level upto floor V level

5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).

5.35 : Add for using extra cement in the items of design mix over and above the specified cement content therein

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide

od183380/2019_2020 : Providing telescopic props up to a max. height of 4.5mtr at a spacing of 2mtr as support to decking sheets and wherever necessary as per instruction of engineer in charge including all materials, labour charges etc.

od144186/2019_2020 : Prefabricated structural steel work riveted, bolted or welded in built up sections, trusses,Built-Up / HR sections / Bracings and framed work including supply & fixing of anchor bolts & base plates,cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and epoxy painting 2 coatswith approved quality epoxy paint all complete. Also nessary frame work for vent openings 3 Nos (1.00x0.60 size) and claddings including mm deck sheet.The Steel structure is to be designed fabricated,supplied and errected through Pre Engineering and the design shall be got approved from client.

od158990/2019_2020 : Providing and fixing in position 12mm thick of shalitex board at various joints such as isolated joints at well edge and column junction as per project engineers instruction with winsil neutral base sealent manufactured by GE silicon as per manufactures requirements etc. complete

od158993/2019_2020 : Providing and fixing in position metal decking sheet of thickness 1mm for supporting RC slab including edge trim cutting, trimming, fixing, leak proofing of joints with necessary stud sype shear connector etc complete.

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

od143874/2019_2020 : Random rubble masonry with available hard stone in site for foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor Vlevel with RCC band at sill level and lintel level with approved block laying polymermodified adhesive mortar all complete as per direction of Engineer-in-Charge. (Thepayment of RCC band and reinforcement shall be made for seperately).

6.4.1 : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:4 ( 1 cement : 4 coarse sand)

10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover

10.9 : Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer -in-Charges, (area of grill to be measured).

10.26.1 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

od143875/2019_2020 : Providing of 35mm thick Factory made Pre-laminated ABS (Acrolynitrile Butadyne Styrene) Door shutter consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honeycomb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm . The shutter should have PVC edge banding of size 0.45mm on the vertical & bottom sides. The shutter to be fixed to pre-laminated FPVC (Foamed Polyvinyl Chloride) Door frame of the size 105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile, mitre joined with 6 Nos. of 50mm steel screw ,GI stiffners of roll formed 'U' GI channel of size 29x9x1mm, 150mm long at each hinge point and frame reinforcement of roll formed 'U' GI channel of size 46x22x.06mm) should be provides. The frame should have a bottom tie rod of 'U' GI chanel size of 15x15x1mm . The shutter shall be fixed to the door frame using Buttefly hinges of SS finish,tower bolt,door stopper,hydraulic dor closer,cutting for vision panel and shall be provided with mortise lock with handles of or approved equivalent make. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners and covered with screw caps.

od143877/2019_2020 : Providing and fixing metal door frames and shutters made up of galvanized steel (base steel as per IS 513 of 0.8 mm thick for shutters - 2 Nos. chromium plated brass 100 mm mortice latch and lock with 6 levers ,door stopper,hydraulic door closer and a pair of lever handles with necessary screws etc. complete (best make of approved quality) .The shutter is to be fixed to the door frame using 100x75x3mm Double ball bearing SS hinges of SS 304 grade in SSS finish The above frames are fixed to the concrete/masonry wall by means of MS Electroplated Anchor Bolt with end caps. The gap between frame and masonary to be filled with silicon sealant.

25.3 : Providing, assembling and supplying vision glass panels (IGUs) comprising ofhermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel unitsof size and shape as required and specified, comprising of an outer heatstrengthened float glass 6mm thick, of approved colour and shade with reflectivesoft coating on surface # 2 of approved colour and shade, an inner Heat strengthnedclear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primaryseal and secondary seal (structural silicone sealant) etc. all complete for the requiredperformances, as per the Architectural drawings, as per the approved shopdrawings, as specified and as directed by the Engineer-in-Charge. The IGUs shallbe assembled in the factory/ workshop of the glass processor. (Payment for fixingof IGU Panels in the curtain glazing is included in cost of item No.26.2) For payment,only the actual area of glass on face # 1 of the glass panels (excluding the areas ofthe grooves and weather silicone sealant) provided and fixed in position, shall bemeasured in sqm.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating onface # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved makehaving properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflectioninternal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performanceglass shall be decided by technical sanctioning authority as per the site requirement

od143878/2019_2020 : Providing and fixing metal door frames and shutters made up 120 minute Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-incharge of galvanized steel (base steel as per IS 513) of 1 mm thick for shutters & 1.6mm thick for frames, galvanized as per IS 277 (with Zinc at 120 GSM) powder coated with pure polyester powder upto 60-90 microns thick in standard RAL paint colour of client choice. Outer frame section should be of 100x50 mm x 1.6 mm thick. Shutter section should be of 1.00 mm thick galvanized steel sheet pressed to provide a 46 mm thick fully flush, double skin door shell with seam joints at stile edges. Honeycomb kraft paper resin bonded with macroplast UR 7221 glue should be used as infill to give the required rigidity and effective acoustic insulation. The shutter should have provision to hold fire rated vision panel SCHOTT PYRAN® STAR GLASS CERAMIC 2Hrs Fire Rated Glass Schott Pyran with UL Logo Frame & ceramic Beadings or approved equivalent of size 200x300x5mm. The shutter should be provided with Assa Abloy Yale Fire Rated Mortize Lock with both side key & Lever Handle + 70mm DP SN S ( AA5103 6072-F+YTL 010) or approved equivalent. The shutter to be fixed with Assa Abloy YALE Surface Door Closer size 2~4, Adj Arm, Fire rated-DCR-1824 FR finish silver UL certified or approved equivalent. The shutter is to be fixed to the door frame using Assa Abloy Yale (4''x3''x3mm),door stopper,hydraulic door closer Ball bearing Butt Hinges -3S2BB403030-CE MARKED, Grade SS 304 - Finish SS or approved equivalent. The frame is to be fixed to the concrete/masonry wall by means of MS Electroplated Anchor Bolt with end caps and sealed with Silicon Sealant.

21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

od185587/2019_2020 : Providing and fixing of stainless steel door handles of 60cm long size (H size) ,door stopper,1 pair of approved make complete as per direction of engineer in charge.

od185682/2019_2020 : Providing and Fixing, uPVC factory made, white colour casement/sliding window, Louvers and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 +- 0.2mm thick galvanised steel profile to be included in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per direction of Engineer-in-charge. The Rates inclusive of 6mm Glazing, Louvers, Locks, hardware hinges, handle and fitting etc

od185700/2019_2020 : Providing and fixing 1mm thick MS Sheet STEEL DOOR with frame and diagonal braces of size 40x 40x6mm angle iron, Vision Panel using 5 mm thick plain glass as per drawings with handles, doorstoppers,hydraulic door closer and locking arrangements etc., including applying a priming coat of redlead paint, cost of materials, labour, HOM of machinery, with all leads and lifts, loading and unloadingcharges , transportation cost and conveyance of all other materials, incidental charges at all floor levelsetc complete for successful completion of work as per specifications and as directed by the Engineer-incharge.

od185701/2019_2020 : Providing and fixing aluminium Structural glazing system with Single Glass of approved make having main frame of vertical of 100mm55mmx2mmthick and horizontal75mmx55x2mm or sections available above nearest size made out of specially designed extruded aluminium sections of approved brand to withstand wind pressure as per BIS code and fabricated, fixed at all levels, elevation and heights to the Masonry / RC walls with necessary clamps, brackets and anchor fasteners. All clamps and brackets shall be Mild Steel Hot dip galvanized minimum 80 microns thick and shall conform to IS: 4759-1996. The extruded aluminium section shall be anodised in approved colour with an anodic coating of minimum 15 microns. Extruded section shall be of 6063 T5 or T6 alloy conforming to ASTM B 221. Any other fastening straps, nuts, bolts, rivets, washers, etc. shall be in stainless steel SS 304 grade. All tapes shall be of Norton/3M make. Vendor to prepare detailed shop drawings/ fabrication drawings based on elevation / architectural drawings, with all details and submit to Client for obtaining necessary approval prior to commencement of work

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

10.25.1 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

od143883/2019_2020 : Providing and laying 100mm thick Vacuum dewatered Cement concrete flooring with concrete hardner topping, under layer 88 mm thick cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardner consisting of mix 1:2 (1cement hardener mix : 2 graded stone aggregate,6mm nominal size ) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacture's specifications.Including hire for vacuum dewatering equipement, mat and labour charges and also providing cutting in floor concrete with 4mm thick glass as per specification at 1.5m centre to centre as detailed in section 6 of the Bid document including cost of all materials and labour etc. complete.

13.52.2 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work

od143884/2019_2020 : Pre polished Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

8.12 : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

8.13.1 : Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye orequivalent.

8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.40 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

11.20.3 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement

16.90 : Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

13.5.1 : 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand)

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

13.29.3 : 18 mm thick plain cement mortar band in cement mortar 1:4 ( 1 cement : 4 fine sand):Raised Band

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

od143885/2019_2020 : Providing and applying intumescent fire retarding paints of required thickness to achieve fire rating of two hour to exposed steel work at any height in its finally erected position as per manufacturer's recommendations over the primered surface of steel structure on its finally erected position along with the 60micron thickness Polyurethane paint of required color as top coat.

od143886/2019_2020 : Providing and applying of factory blended vermiculite cement with fire protective additives and fillers as bonding and reinforcing agents designed to adhere firmly to elements with a fire rating of 2 hours as per manufacturer's recommendations over the primered surface of steel structure on its finally erected position.

13.58 : Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant .

od143887/2019_2020 : Providing wire mesh over recessed area for making good the surface and plastering

22.14.1 : Grading roof for water proofing treatment with:Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

od185973/2019_2020 : Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement : 4 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer - in- Charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer in Charge

od185974/2019_2020 : Supplying and filling with m-sand in sunken floors, including watering, ramming consolidating and dressing complete

od185975/2019_2020 : Providing and laying cement concrete in sunken floor, terrace floor etc. up to floor five level, including the cost of grading and finishing:1:11/2:3 (1 cement : 11/2 coarse sand :3 graded stone aggregate 12/6 mm nominal size)

22.20.1 : Providing and laying APP ( Atctic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non- woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. OVER the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under: Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5CM. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be up to - 2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane:3 mm thick

od143888/2019_2020 : Providing cubicle system in ladies changing room with equivalent material for locker with compact laminate 3mm thick(side and back partition) and 9mm thick (top, bottom& shelves) with single colour of HPL boards and 3 tier locker with size of column 450x450x450 with acessories standard make aluminium, stainless steel-304 grade accessories: Aluminium interlocking supporting channels, SS cam locks with door number plate,SS hinges -SS, door stopper rubber lining, SS screws and pvc wall plugs and open locker for hanging dress complete.

od143889/2019_2020 : Providing cubicle system in gents changing rooms with equivalent material for locker with compact laminate 3mm thick(side and back partition)and 9mm thick(top,bottom& shelves)with single colour of HPL boards and 3 tier locker with size of column 450x450x450 mm with standard acessories make aluminium, stainless steel-304 grade accessories: Aluminium interlocking supporting channels, SS cam locks with door number plate, SS hinges -SS, door stopper rubber lining, SS screws and PVC wall plugs and open locker for hanging dress complete.

od143891/2019_2020 : Providing and fixing randeur toilet cubicle of standard dimension which includes 600 mm door size width made of heat,bacteria,water, chemical,stratch,impact, anti bacterial resistant 18 mm thick soild compact laminate panels tested by shriram test house.finish of the compact laminate should be suede/raw silk,which includesdoors,pilaters and intermediate panels finished with approved texture/shade as per the detail drawings and as per IS 2046 indian standard and as per fire retardant BS-476/97 standard.The product should have Green guard Certificate. this also includes providing and fixing in position necessary hardware made out of stainless steel(grade 304) as per manufactures specification and Architects instruction like (1)door knob (2)gravity hinges(3)Thumb turn lockset indicators (4) coat hooks (5)U- channel, (6)SS shoe box plate(7)MS plate base (8) Rubber noise deafening tape (9)screws and wall plugs. All srews of 304 grade in stainless steel with satin finish.All pilasters area supported by MS- base steel bottom cladding with stainless steel shoe box plate.The base of the stainless steel shoe box will be anchored to the floor with a clearance height upto 110 mm.fixing of intermediate panels to the wall shall be stainless steel 'L' bracket or stainless U channel section are fixed into wall with srew inzerts..

12.52.3 : Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit.

od143893/2019_2020 : Providing & fixing Poly carbonate multi wall plain sheet 8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5X55mm) with EPDM seal complete upto any pitch in horizontal /vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required.

23.1.2.2 : Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level.Rocky strata including Boulders350 mm dia

od189627/2019_2020 : Providing & fixing of propylene Plastic rungs with Cement concrete of 1:2:4 with all necessary arrangements. Including all cost of labour, material, conveyance, loading, unloading, T&P, etc. All complete as per the direction of Engineer-in-charge.

od189628/2019_2020 : Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and metal sash putty for passage wall.

od189629/2019_2020 : Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for indoor floor laid on 20mmthick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting thejoints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge.

od189630/2019_2020 : Providing and making Sliding folding partition made in Aluminium section of 2'x1' with 1.5mm thickness like Top sliding 'G' channel pivoted wheels, suspension system, bearing hinges (5') each door, conceled Towel bolt and handles, bottom 'U' channel guide and no of leafs are 3 full and 2 half leafs made of 2'x1' aluminium section frame filled with 24 kg density glass wool insulation wrapped FRP tissue and finished with 8mm plywood on both sides over which necessary fabric and laminate finished as per drawing.The rate shall include all the necessary hardware necessary for making complete as per the design.

od189631/2019_2020 : supplying,fabrication and erection of FunderMax & Laminates for gate ceiling ( is high-quality construction product that is available in large format panels for Cladding balconies and building facades. )FunderMax Exterior panels are Duromer High Pressure Laminates (HPL) as per EN 438-6, type EDF with extremely effective weather protection. The weather protective coating consists of double hardened acrylic polyurethane resins. They are produced in laminate presses under high pressure at high temperature.)

od189632/2019_2020 : Providing and applying of texture paint - Asian royale play or equivalent as per manufacturers specifications.

SECURITY CABIN

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide

5.37.1 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All wiork upto plinth level

5.37.2 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All work above plinth level upto floor V level

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor Vlevel with RCC band at sill level and lintel level with approved block laying polymermodified adhesive mortar all complete as per direction of Engineer-in-Charge. (Thepayment of RCC band and reinforcement shall be made for seperately).

6.1.1 : Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)

od143875/2019_2020 : Providing of 35mm thick Factory made Pre-laminated ABS (Acrolynitrile Butadyne Styrene) Door shutter consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honeycomb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm . The shutter should have PVC edge banding of size 0.45mm on the vertical & bottom sides. The shutter to be fixed to pre-laminated FPVC (Foamed Polyvinyl Chloride) Door frame of the size 105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile, mitre joined with 6 Nos. of 50mm steel screw ,GI stiffners of roll formed 'U' GI channel of size 29x9x1mm, 150mm long at each hinge point and frame reinforcement of roll formed 'U' GI channel of size 46x22x.06mm) should be provides. The frame should have a bottom tie rod of 'U' GI chanel size of 15x15x1mm . The shutter shall be fixed to the door frame using Buttefly hinges of SS finish,tower bolt,door stopper,hydraulic dor closer,cutting for vision panel and shall be provided with mortise lock with handles of or approved equivalent make. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners and covered with screw caps.

od189892/2019_2020 : Providing and Fixing, uPVC factory made, white colour casement/sliding window, Louvers and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 +- 0.2mm thick galvanised steel profile to be included in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per direction of Engineer-in-charge. The Rates inclusive of 6mm Glazing, Louvers, Locks, hardware hinges and fitting etc.

13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

13.5.1 : 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand)

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

12.51.6 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Gutter (600 mm over all girth)

13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.40 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

PLUMBING AND SANITARY

od143805/2019_2020 : Providing, Fixing, Testing and Commissioning at site Wall Mounting type water closet with P trap & its all fittings like rag bolts, solid plastic Seat cover etc and Concealed flushing cistern, brass screws, nuts , and washers complete including cutting and making good the walls and floors wherever required. Etc complete.

od143807/2019_2020 : Providing, Fixing, Testing and Commissioning at site Handicapped Wall mounting water closet with P trap & it's all fittings like rag bolts, solid plastic seat cover etc., and Concealed flushing cistern, brass screws, nuts, and washers. Flat back Wash Basin with half pedestal with accessories Flexible Connection tube, 32 mm C.P. brass waste coupling, rag bolts. With 1 health faucet, 2 Angle valves, 1 Pillar tap,1 Bottle trap, 2 Grab bars ,1 Hand rail & complete including cutting and making good the walls and floors wherever required. Etc complete.

17.1.1 : Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

od143810/2019_2020 : Providing, Fixing, testing and commissioning at site Wash Basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. Oval Wash basin Counter Top

17.5.1 : Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern

18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

17.31 : Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

17.32.4 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

18.50.1 : Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore

17.10.1.3 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 200 mm

17.70.1 : Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms

17.70.2 : Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms

od143833/2019_2020 : Providing, Fixing CP Robe Hook with fixing screws

17.34.1 : Providing and fixing toilet paper holder:C.P. brass

17.71 : Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

17.72 : Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms

od143835/2019_2020 : B SOIL, WASTE, VENT & RAIN WATER PIPES Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, door bends, junctions, cowls, etc., laid under floor/fixed on walls, and in pipe shafts, universal clamps & anchor fasteners(8mm), threaded rod (8mm),nuts, washers, wherever required etc. complete. (In Shaft) 110 mm O.D. (SWR Type-B)

od207031/2019_2020 : B SOIL, WASTE, VENT & RAIN WATER PIPES Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, door bends, junctions, cowls, etc., laid under floor/fixed on walls, and in pipe shafts, universal clamps & anchor fasteners(8mm), threaded rod (8mm),nuts, washers, wherever required etc. complete. (In Shaft) 50 mm O.D. (SWR Type-B)

od207032/2019_2020 : 'B SOIL, WASTE, VENT & RAIN WATER PIPES Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, door bends, junctions, cowls, etc., laid under floor/fixed on walls, and in pipe shafts, universal clamps & anchor fasteners(8mm), threaded rod (8mm),nuts, washers, wherever required etc. complete. (In Shaft) 75 mm O.D. (SWR Type-B)

od143839/2019_2020 : Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type A) (IS:13592) or ( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, etc. complete. (For Rain water pipes ) 110mm O.D Type A

od207039/2019_2020 : Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type A) (IS:13592) or ( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, etc. complete. (For Rain water pipes ) 75 mm O.D ( 4Kg/cm2) Vent pipe in shaft

od143841/2019_2020 : Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, clamps, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete. (For Internal waste line) 110mm O.D

od143842/2019_2020 : Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, clamps, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete. (For Internal waste line) 75 mm O.D

od143843/2019_2020 : Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, clamps, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete. (For Internal waste line)50 mm O.D

od143847/2019_2020 : 'Providing, Fixing, testing and commissioning at site in position Deep Seal UPvc fabricated Multi floor trap (7"), with suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. complete in all respects.50/75 mm dia outlet (In Ceiling)

od143849/2019_2020 : Providing,Fixing, testing and commissioning at site 150x150 mm square C.P. cast brass or stainless steel anti cockroach grating cover SS (304) of matching size of UPvc fabricated floor trap / multi inlet trap complete in all respects.

od143851/2019_2020 : 'Providing, Fixing, testing and commissioning at site in position Concealed floor trap (7"Deep Seal UPvc fabricated Multi floor trap with Stainless Steel Square frames (150x150mm) SS (304), Rubber Seal and flat round cover with screw and suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. complete in all respects. 50/75 mm dia outlet (For Urinals In Ceiling)'

od143853/2019_2020 : Providing, Fixing, testing and commissioning at site in position Floor clean out with Stainless Steel Square frames SS (304), Rubber Seal and flat round cover with screw. complete in all respects. 110mm dia (4")

od143854/2019_2020 : Providing, Fixing, testing and commissioning at site in position Floor clean out with Stainless Steel Square frames SS (304), Rubber Seal and flat round cover with screw. complete in all respects. 75mm dia (3")

od207041/2019_2020 : 'Supplying, installing, testing and commissioning at site in position PVC Roding Eye (6kg/cm2) Complete in all respects.' 75mm dia

od207042/2019_2020 : 'Supplying, installing, testing and commissioning at site in position PVC Roding Eye (6kg/cm2) Complete in all respects.' 110mm dia

od207043/2019_2020 : 'Providing, Fixing, testing at site in position 160mm dia square /circular grating Terrace rain water outlet (Cast Iron) (for 110mm dia pipe)'

18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes

18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes

od207264/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 50 mm dia.nominal outer dia pipes.

od207265/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 40 mm dia.nominal outer dia pipes.

od207064/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 62.5 mm dia.nominal outer dia pipes.

od207065/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 25 mm dia.nominal outer dia pipes.

od207066/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 32 mm dia.nominal outer dia pipes.

od207081/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 20 mm dia.nominal outer dia pipes.

od207090/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-80 ) of approved make For Pumping line from ( Sump Tank To Over head Tank) complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) 2" (62.5mm Outer dia) dia

18.18.2 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore

18.18.3 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore

od143860/2019_2020 : Providing and Fixing Ball Valves (Brass) of approved quality, High or low pressure, with plastics floats complete: 50mm nominal bore

18.19.4.2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreVertical

od207135/2019_2020 : Providing, Fixing, testing and commissioning at site Puddle Flange fabricated from Upvc ASTM Grade sch-40 pipes & uPVC sheet (600 mm long) 4"(100mm) dia

od207136/2019_2020 : Providing, Fixing, testing and commissioning at site Puddle Flange fabricated from Upvc ASTM Grade sch-40 pipes & uPVC sheet (600 mm long) 2" (50mm) dia

od143864/2019_2020 : Providing, Fixing, testing and commissioning at site in positions automatic Air Release Valves, ball valves of approved quality and make on the top of the vertical water supply pipes as per specification and drawings 3/4'(20mm) dia

od143865/2019_2020 : Providing, Fixing, testing and commissioning at site in positions Brass Y Strainer, of approved quality and make as per specification and drawings.2 ½"(65mm) dia

od208141/2019_2020 : Providing fixing testing and commissioning of water meter and stop cock in pvc pipe line with direct reading dia in KL with all integral part of gun metal or brass with necessary fittings such as PVC union, PVC coupler including value chamber or GRP cover etc. 32 mm dia

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

od143867/2019_2020 : Providing and Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, PVC pipe of IS 4985(6kg/cm2) including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete 110mm OD

od207152/2019_2020 : Providing and Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, PVC pipe of IS 4985(6kg/cm2) including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete 160mm OD

19.7.1.2 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With Sewer bricks conforming to IS : 4885

od208154/2019_2020 : Providing and fixing square - mouth SW Gully trap class SP-1 complete with CI grating brick masonry chamber with water tight CI cover with frame of 300x300mm size (inside) the weight of cover to be not less than 4.50kg and frame not to be less than 2.70 kg as per standard design 150x 100 mm size P type With Sewer bricks conforming to IS: 4885

od143869/2019_2020 : Providing and fixing Ductile Iron (Hinged Type) cover and frame. 600X600mm size 40kg wt for Overhead Tank

od143870/2019_2020 : Providing and fixing Ductile Iron (Hinged Type) cover and frame. 900X900mm size 125kg wt for Sump Tank

od208033/2019_2020 : Supply, Installation, testing and commissioning of pumping systemDuty conditions:- 90 LPM @ 50 M Head with dry run protection and automatic level control. ,with control panel,automatic changover switch, with all necessary valves, flexible connections, pressure gauges, valvees, strainers, supports, fixings and fittings electrical/ control panels, power and control cabling ,level sensor with switch, cable trays etc as specified and as shown on drawings and complying to relevant standards.

od208034/2019_2020 : 'E. PUMP AND ACCESSORIES Providing, Fixing, testing and commissioning Hydro pneumatic pressure booster system with 2 (1W +1 Assist ) Nos Vertical Multistage Inline pump set with SS impeller, SS Shafts and SS casing. Each pumps should be capable to deliver 3 lps @ 2 bar , with 1.1kW/1.5 HP/3phase motor. Suction and Delivery of each pumps should be connected to a GI manifolds with suitable size, isolation ball valves and NRV in delivery of each pump. A common control panel to operate the pump set as 1 working + 1Assist/ Standby according to the demand , Control panel shall be of variable speed drive( VFD ), HMI, Dry run ,Over load, Phase reversal,error log display, flaulty pump isolation, Protections Etc, Control panel logic should be designed in such a way that all the pumps should be soft start with VFD in cascading manner to increase the life and power savings. The entire system shall be supplied with all the pump sets and control panel assembled in a common GI Skid completely assembled and tested at factory for the duty points along with 100 ltr pressure vessel. Inlet pipe size 65 mm inner dia Outlet header line Size 65mm inner dia '

od208035/2019_2020 : 'Providing, Fixing, testing and commissioning Automatic Tank Filling system with 2 ( 1W+ 1S) Nos Surface Mounting Monoblock pumpset with Ci impeller ,Ci :Motor Casing ,. Each pump capable to deliver 4.2 lps@ 45 mtr head (maxi head range 50 mtr) and with 1.5 kw/ 2 hp / 1ph, . A Wall Mounting control panel for pumps operate the pumpset as 1 working + 1 Standby according to the demand, level controller with Dry Run Protection,Overload protection, float switch/ Sensors for automatic operation ,etc . The entire system to be supplied with all the pump sets and automatic pump controller . Delivery Pipe Size to be provided : 40 MM

UNDER GROUND SUMP

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

od151225/2019_2020 : Extra for additional lead upto 1km

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level

5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

22.23.1 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm

4.12 : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .

13.9.1 : Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster

od151230/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 65mm

od151231/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 80mm

od151233/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 150mm

od151232/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 100mm

19.18.3 : Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg

OVER HEAD TANK

5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level

5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

22.7.1 : Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-Charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer - in- Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement : 4 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer - in- Charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer in Charge:With average thickness of 120 mm and minimum thickness at khurra as 65 mm

4.12 : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .

od151230/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 65mm

od151231/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 80mm

od151232/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 100mm

19.18.3 : Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg

od222048/2019_2020 : Providing & fixing of propylene Plastic rungs with all necessary arrangements.Including all cost of labour, material, conveyance,loading, unloading, T&P, etc. All complete as per the direction of Engineer-in-charge.

STP / SEPTIC TANK

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

od151225/2019_2020 : Extra for additional lead upto 1km

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

4.12 : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

od151230/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 65mm

od151231/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 80mm

od151233/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 150mm

od151232/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 100mm

19.18.3 : Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg

SIGNAGE BOARD

od151224/2019_2020 : Supply, Fabrication and erection of MS Farme for Sign board with Mild steel angle iron 75 mm x 75 mm x 6 mm for erecting the sign board.

od151226/2019_2020 : Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes, Letter height, Colour, Back ground, language and mounting height of the board shall be fixed at all height/ as per drawing

od151227/2019_2020 : Providing and installing in position the following type of sign boards made out of 1.5 mm thick 304 grade stainless steel with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes, Letter height, Colour, Back ground, language and mounting height of the board shall be fixed at all height/ as per drawing

od151228/2019_2020 : Providing and installing in position the following type of sign boards made out of 4mm thick ACP sheet with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes, Letter height, Colour, Back ground, language and mounting height of the board shall be fixed at all height/ as per drawing as per design mounted on 2.5cm x 2.5cm size square MS pipe frame

ELECTRICAL LT

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

1.21.4 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm

1.21.5 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.50 mm

od193487/2019_2020 : Supplying and fixing of following sizes of medium class PVC Csing Cap/GI Pipe along with accessories on wall, furnitures or in ground as required. 50mm GI Pipe

od193488/2019_2020 : Supplying and fixing of following sizes of medium class PVC Csing Cap/GI Pipe along with accessories on wall, furnitures or in ground as required. 40mm GI Pipe

od193489/2019_2020 : Supplying and fixing of following sizes of medium class PVC Csing Cap/GI Pipe along with accessories on wall, furnitures or in ground as required. 32mm GI Pipe

od193490/2019_2020 : Supplying and fixing of following sizes of medium class PVC Csing Cap/GI Pipe along with accessories on wall, furnitures or in ground as required. 50mm Casing Cap

od193491/2019_2020 : Supplying and fixing of following sizes of medium class PVC Csing Cap/GI Pipe along with accessories on wall, furnitures or in ground as required 32mm Casing Cap

od193492/2019_2020 : Supplying and fixing of following sizes of medium class PVC Csing Cap/GI Pipe along with accessories on wall, furnitures or in ground as required. 25mm Casing Cap

1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.55.1 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A

1.55.2 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B

1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.17.30 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm

1.17.33 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 6 sq. mm

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

od150775/2019_2020 : Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 25A Socket outlet

od150778/2019_2020 : Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 32A DP Switch

od150782/2019_2020 : Supplying and fixing suitable size25A Weather proof 3 pin plug socket with double pole switch for car charging socket including metal box with IP65 protection etc. complete

1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)

1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.27.6 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm)

1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).

1.32 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

od150795/2019_2020 : Supply, installation, testing and commissioning of 450mm wall fan with necessary bolt and nuts, etc. as required including giving connections with required length of 16/0.20mm pvc insulated and PVC sheathed 3 core round copper conductor flex wire confirming to relevant IS

od150797/2019_2020 : Supplying of Ceiling Fan 1200mm Sweep complete with 300mm down rod, canopies, shackles and blades and without regulator working on 230/240V Single phase AC,as per latest BEE Standard & IS 374:2019

od150800/2019_2020 : Supplying of Ceiling Fan 900mm Sweep complete with 300mm down rod, canopies, shackles and blades and without regulator working on 230/240V Single phase AC,as per latest BEE Standard & IS 374:2019

1.44 : Installation, testing and commissioning of ceiling fan, including wiring the down rods of standardlength (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.as required.

1.47 : Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

1.49 : Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.

od150805/2019_2020 : Supplying of Exhaust Fan 450mm working on 230/240V Single phase AC,900 RPM

1.50.1 : Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep

od150806/2019_2020 : Supply, installation, testing and commissioning of meduim duty Exhaust fan/ Ductable exhaust fanwith necessary bolt and nuts, etc. as required including giving connections with required length of 16/0.20mm pvc insulated and PVC sheathed 3 core round copper conductor flex wire confirming to relevant IS Ductable Circular Inline Exhaust fan (2-5 nos)

1.56 : Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).

2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

2.3.4 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door

od150812/2019_2020 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door

od193494/2019_2020 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper 8 way (4 + 24), Double door bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

od150813/2019_2020 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door

od193495/2019_2020 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.2 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural

2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

od193522/2019_2020 : Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

od216106/2019_2020 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current breaker with overload (RCBO), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required 25A, 2P, 30mA

od193528/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current breaker with overload (RCBO), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. 25A 4P,30MA

od193529/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current breaker with overload (RCBO), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. 32A 4P,30MA

od193530/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current breaker with overload (RCBO), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. 40A 4P,30MA

od217902/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current breaker with overload (RCBO), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. 40A 4P 100MA

od193531/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current breaker with overload (RCBO), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. 63A 4P 100MA

od193532/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current breaker with overload (RCBO), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. 100A 4P 100MA

od193533/2019_2020 : Supplying and fixing TPN MCCB in existing MCCB VTPN DBs complete with connections,testing and commissioning etc as required. 63A 4P TM MCCB

od193534/2019_2020 : Supplying and fixing TPN MCCB in existing MCCB VTPN DBs complete with connections,testing and commissioning etc as required. 100A 4P TM MCCB

od193535/2019_2020 : Supplying and fixing contactor in existing DBs complete with connections,testing and commissioning etc as required. 40A 2P NO CONTACTOR

od193536/2019_2020 : Supplying and fixing TIME SWITCH in existing DBs complete with connections,testing and commissioning etc as required. Analog type daily time switch

od150822/2019_2020 : Supply and fixing 32 Amps 240V, SPN industrial type socket outlet with 2 pole and earth, metal enclosed plug top alongwith 32 amps 'c' curve SP MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket out let and complete with connections, testing and commissioning etc., as required 32A 240V, SPN Industrial type Socket

od150823/2019_2020 : Supply and fixing 63 Amps 415V, TPN industrial type socket outlet with 4 pole and earth, metal enclosed plug top alongwith 63 amps 'c' curve TPN MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket out let and complete with connections, testing and commissioning etc., as required 63A 415V, TPN Industrial type Socket

2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

od150824/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. LED Panel light 12 W LED 4000 K, surface mounted, square fitting with control driver etc.

od150825/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. LED Panel light 18 W LED 4000 K, surface mounted, square fitting with control driver etc.

od150826/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. LED Panel light 6 W LED 4000 K, surface mounted, round fitting ultra slim with control driver etc. 6W LED 4000K

od150827/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. LED Panel light 12 W LED 4000 K, surface mounted, round fitting ultra slim with control driver etc.

od150828/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. LED Panel light 24 W LED 4000 K, surface mounted, round fitting ultra slim at height 14mm or nearest with control driver etc.

od150829/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. Surface and wall mounted LED batten extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser & integrated electronic driver with lamp 20 W LED 6500 K

od150830/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.Surface and wall mounted LED batten extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser & integrated electronic driver with lamp 10 W LED 6500 K

od150831/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. Aesthetically designed 34W or nearest LED cool day light flat panel for surface mounting which provides soft light and glare free symetrical illumination , 600x600x70mm size, 6500K or nearest

od150832/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. energy saving surface mounted, decorative oval 10W bulk head edge-lit LED luminaire comprising of high brightness LEDs with IP65 protection, LED warm light

od150833/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. Energy saving medium bay 80W LED, Warm light with IP65 luminiare with high efficiency, Circular fitting

od150834/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. energy saving 48W or nearest watts LED STREET LIGHT MADE OF PRESSURE DIE CAST ALUMINIUM housing lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP66 protection and impact resistance of IK07.Suitable for pole dia 45mm maximum. 5000K or nearest

od150836/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. energy saving 25W or nearest watts LED STREET LIGHT MADE OF PRESSURE DIE CAST ALUMINIUM housing lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP66 protection and impact resistance of IK07.Suitable for pole dia 45mm maximum.5000K or nearest

od150837/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.Flood light Energy saving IP65 flood light luminaire with high power COB LED as light source. 30W LED 5000K or nearest

od150838/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. Bollard Lamp fitting IP65 energy saving aluminium landscape luminiare for diffused lighting with 8W LED Light source of height 1m , LED Warm light

od150839/2019_2020 : Fabricating, supplying and erection of 6 Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 180kmph for 6 Mtrs pole having dimensions bottom 130mm, top 70mm with 3mm thick, 220mmx220x12mm base plateS and 4Nos of M20x600mm long J bolts along with template and the pole shall be galvanized with not less than 65micron etc.. above specification with Single arm bracket including fixing the lamp and giving connection using suitable size 3 core copper round cable etc complete

od150840/2019_2020 : Fabricating, supplying and erection of 6 Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 180kmph for 6 Mtrs pole having dimensions bottom 130mm, top 70mm with 3mm thick, 220mmx220x12mm base plate and 4Nos of M20x600mm long J bolts along with template and the pole shall be galvanized with not lessabove specification with Double arm bracket including fixing the lamp and giving connection using suitable size 3 core copper round cable etc complete

11.6.2 : Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.40 mm dia

15.1 : Supplying,Installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10 Amp, for mounting height up to 2.8 Mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming and site etc. complete as required

od229466/2019_2020 : Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing LED lamps per fitting, complete with all accessories including connections etc. as required.

od150841/2019_2020 : Installation of Gate light, Bollad fittings, Flood light fittings including providing necessary accessories and giving connection using suitable size 3core cable

od150842/2019_2020 : Providing and fixing plain 16/0.20 mm (0.50 sq.mm) 3 Core circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required

1.51 : Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes

1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required.

1.43 : Providing and fixing extra conduit down rod of 20 mm dia, 2X10 cm length wiring with 2 X1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

od194070/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx2Cx4Sqmm AL XLPE Cable

od194049/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx4Cx4Sqmm AL XLPE Cable

od194050/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx4Cx6Sqmm AL XLPE Cable

od194051/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx4Cx10Sqmm AL XLPE Cable

od194052/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx4Cx16Sqmm AL XLPE Cable

od194053/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx4Cx25Sqmm AL XLPE Cable

od194054/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx3.5Cx35Sqmm AL XLPE Cable

od194055/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx3.5Cx50Sqmm AL XLPE Cable

od194056/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx3.5Cx120Sqmm AL XLPE Cable

od194057/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx3.5Cx185Sqmm AL XLPE Cable

od150843/2019_2020 : Supply and clamping the following size of corrugated pvc flexible conduit with necessary compression gland with locking ring and checknut at termination pointed using suitable size GI/MS saddle spacing not exceeding 60 cm on surface including making good the damages, color wasing etc as required. 20mm dia

od150844/2019_2020 : Supply and clamping the following size of corrugated pvc flexible conduit with necessary compression gland with locking ring and checknut at termination pointed using suitable size GI/MS saddle spacing not exceeding 60 cm on surface including making good the damages, color wasing etc as required. 25mm dia

od150845/2019_2020 : Supply and installation of suitable size stainless steel Rod type fan clamp as per IS 732

7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm

7.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm

7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm

7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

7.5.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 35 sq. mm and upto 95 sq. mm

7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm

7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)

9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)

9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)

9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

od150855/2019_2020 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1Kv grade as required. 4C x 6Sq. mm-

od150856/2019_2020 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1Kv grade as required. 4C x 4Sq. mm-

od150857/2019_2020 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1Kv grade as required. 2C x 4Sq. mm-

od150858/2019_2020 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray cable tray with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness

od150859/2019_2020 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray cable tray with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

od150860/2019_2020 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray cable tray with perforation not more than 17.5%, in convenient sections,joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 450 mm width X 50 mm depth X 2.0 mm thickness

od150861/2019_2020 : Providing, Fixing, Laying, Testing and Commissioning of the following 1.1KV Grade PVC Insulated Armoured Copper Control Cables (YWY/YFY) through excavated trenches, built up cable trenches, cable trays, hume pipes as necessary and including supply of all materials for clamping, cable route markers, identification tags and clamping at intervals. 10C X 2.5 sq mm cu cable

od150862/2019_2020 : Providing, Fixing, Laying, Testing and Commissioning of the following 1.1KV Grade PVC Insulated Armoured Copper Control Cables (YWY/YFY) through excavated trenches, built up cable trenches, cable trays, hume pipes as necessary and including supply of all materials for clamping, cable route markers, identification tags and clamping at intervals. 4C X 2.5 sq mm Cu cable

od150863/2019_2020 : Providing, Fixing, Laying, Testing and Commissioning of the following 1.1KV Grade PVC Insulated Armoured Copper Control Cables (YWY/YFY) through excavated trenches, built up cable trenches, cable trays, hume pipes as necessary and including supply of all materials for clamping, cable route markers, identification tags and clamping at intervals. 3C X 2.5 sq mm Cu cable

od150864/2019_2020 : Providing, Fixing, Laying, Testing and Commissioning of the following 1.1KV Grade PVC Insulated Armoured Copper Control Cables (YWY/YFY) through excavated trenches, built up cable trenches, cable trays, hume pipes as necessary and including supply of all materials for clamping, cable route markers, identification tags and clamping at intervals. 2C X 2.5 sq mm Cu cable

od150865/2019_2020 : Providing and Fixing of all materials and termination of the following 1.1 KV Grade PVC Insulated Armoured Copper Control Cables (AYWY / AYFY) using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland and armour earthing using copper conductor of adequate size etc. 10C X 2.5 sq mm cu cable

od150866/2019_2020 : Providing and Fixing of all materials and termination of the following 1.1 KV Grade PVC Insulated Armoured Copper Control Cables (AYWY / AYFY) using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland and armour earthing using copper conductor of adequate size etc. 4C X 2.5 sq mm Cu cable

od150867/2019_2020 : Providing and Fixing of all materials and termination of the following 1.1 KV Grade PVC Insulated Armoured Copper Control Cables (AYWY / AYFY) using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland and armour earthing using copper conductor of adequate size etc. 3C X 2.5 sq mm Cu cable

od150868/2019_2020 : Providing and Fixing of all materials and termination of the following 1.1 KV Grade PVC Insulated Armoured Copper Control Cables (AYWY / AYFY) using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland and armour earthing using copper conductor of adequate size etc. 2C X 2.5 sq mm Cu cable

od194091/2019_2020 : MSB 1 Supply, Installation, Testing & Commissioning of Main Switch Board (MSB) , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.The panel shall be with Top/bottom entry to receive incoming & outgoing cable EB SIDE Incomer 400A, FP 36KA microprocessor type MCCB Having islation duty with 3O/C+1E/F Release SET AT 333A - 1 No 400A 36KA 4P Contactor - 1No Instruments(incomer) 2A MCB - 6 Nos. RYB indication lamp, LED type - 2set Digital Multi function meter with Acc Cl1 with RS485 communication -1no. 51G RELAY-1 400/5A 15VA class 1 resin cast CT -2set Surge Protection Device (Class B/Class 1 as per IEC 61643(IP 20) )- 1 no DG SIDE Incomer 250A 4P,36KA MCCB - 1 No 325A 36KA 4P Contactor-1No. Instruments(incomer) 2A MCB - 6 Nos. RYB indication lamp, LED type - 2set 250/5A 15VA class 1 resin cast CT -1set Digital Multi function meter with Acc Cl1 with RS485 communication -1no. AMF relay - 1No. Buscoupler 400A 4P Contactor-1No Busbar 400A ,36kA TPN busbar chamber with Aluminium busbar Outgoings 200A,TPN, 36kA, MCCB set at 160A adjustable thermal magnetic release with OL & SC protection, with RS 485 communication facility - 5Nos 100A,TPN, 36kA, MCCB set at 100A adjustable thermal magnetic release with OL & SC protection, with RS 485 communication facility - 3No 63A TPN Isolator-1No

od194199/2019_2020 : Supply, Installation, Testing & Commissioning of INVERTER PANEL, cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tankprocess etc., including following components as per drawing and technicalspecifications.Incomer - 32A ,TPN,10KA,MCCB- 1 No ,BUSBARS-40A TPN busbarchamber with Aluminium busbar ,INSTRUMENTS-RYB indication lamp, LED type - 1set , OUTGOING-16A DP MCB 10KA-4Nos

od194200/2019_2020 : Supply, Installation, Testing & Commissioning ofLift PANEL , cubicle type, made out of 1.6mm thickCRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor,compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , includinginternal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tankprocess etc., including following components as per drawing and technicalspecifications.Incomer-63A TPN 10KA MCCB-1NO,Busbar:-1 Set TPN AL bus barssuitably rated for 63A,Outgoing:32A 4P RCBO 100mA -1No,25A DP RCBO 30mA-1No with4nos of 6A SP MCB

od194201/2019_2020 : Supply, Installation, Testing & Commissioning of Pump PANEL , cubicle type, made out of 1.6mm thickCRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor,compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , includinginternal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tankprocess etc., including following components as per drawing and technicalspecifications.Incomer-63A TPN 10KA MCCB-I NO,BUSBARS-63A TPN busbarchamber with Aluminium busbar,INSTRUMENTS-RYB indication lamp, LED type - 1set,2A MCB-3NOS,OUTGOING-25A 4P MCB with DOL Starters for 3HP motors and on/off indication lamps with change over switches -1No,10A DP MCB with DOL Starters for 1.5HP motors and on/off indication lamps with change over switches -1No,16A 4P MCB -2Nos.

od194202/2019_2020 : Supply, Installation, Testing & Commissioning of WTP PANEL , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. Incomer 32A ,4P,TM,10KA,MCCB- 1 No BUSBARS 40A TPN busbar chamber with Aluminium busbar INSTRUMENTS RYB indication lamp, LED type - 1 set OUTGOING 6A TPN,C MCB with DOL Starters for 1HP motors and on/off indication lamps with change over switches -4No 6A TPN,C MCB -2Nos.

od194204/2019_2020 : EQUIPMENT PANELSupply, Installation, Testing & Commissioning of EQUIPMENT PANEL- 1 , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.The panel shall be with Top/bottom entry to receive incoming & outgoing cableIncomer 100A TPN 25KA MCCB- 1 NoInstruments(incomer)2A MCB - 3 nosRYB indication lamp, LED type - 1 setBusbar100A TPN busbar chamber with Aluminium busbarOutgoings63A TPN 10KA MCCB- 3 No32A,TPN MCB-1Nos25A TPN MCB - 4Nos

od194205/2019_2020 : UPS PANELSupply, Installation, Testing & Commissioning of UPS PANEL , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.The panel shall be with Top/bottom entry to receive incoming & outgoing cableIncomer 50A TPN 10KA MCCB- 1 NoInstruments(incomer)2A MCB - 3 nosRYB indication lamp, LED type - 1 setBusbar63A TPN busbar chamber with Aluminium busbarOutgoings25A SPN 10KA MCB - C curve-2Nos25A TPN 10KA MCB - C curve-4Nos

od194206/2019_2020 : Supply, Installation, Testing & Commissioning of POWER panel 3 , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. The panel shall be with Top/bottom entry to receive incoming & outgoing cable Incomer 200A TPN 25KA MCCB- 1 No Instruments(incomer) 2A MCB - 3 nos RYB indication lamp, LED type - 1 set Busbar 200A TPN busbar chamber with Aluminium busbar Outgoings 100A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 1Nos 63A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 6Nos

od194207/2019_2020 : Supply, Installation, Testing & Commissioning of POWER panel 2 , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. The panel shall be with Top/bottom entry to receive incoming & outgoing cable Incomer 200A TPN 25KA MCCB- 1 No Instruments(incomer) 2A MCB - 3 nos RYB indication lamp, LED type - 1 set Busbar 200A TPN busbar chamber with Aluminium busbar Outgoings 100A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 1Nos 63A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 6Nos

od194208/2019_2020 : Supply, Installation, Testing & Commissioning of POWER panel 1 , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. The panel shall be with Top/bottom entry to receive incoming & outgoing cable Incomer 200A TPN 25KA, MCCB- 1 No Instruments(incomer) 2A MCB - 3 nos RYB indication lamp, LED type - 1 set Busbar 200A TPN busbar chamber with Aluminium busbar Outgoings 63A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 6Nos 40A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 1Nos

od194209/2019_2020 : Supply, Installation, Testing & Commissioning of LIGHT panel , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.The panel shall be with Top/bottom entry to receive incoming & outgoing cableIncomer 100A ,4P,TM,25KA,MCCB- 1 NoInstruments(incomer)2A MCB - 3 nosRYB indication lamp, LED type - 1 setBusbar63A TPN busbar chamber with Aluminium busbarOutgoings40A TPN 10KA MCB. - 1No.25A TPN 10KA MCB. - 4Nos25A SPN 10KA MCB. - 7No's

od150882/2019_2020 : Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc. 10 SWG Copper wire.

od150884/2019_2020 : Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc. 6 SWG Copper wire.

od150885/2019_2020 : Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc. 25x3 earth bunch

od150886/2019_2020 : Supply and providing copper sockets for the below mentioned copper earth leads etc complete 6 SWG Copper wire.

od150888/2019_2020 : Supply and providing copper sockets for the below mentioned copper earth leads etc complete 10 SWG Copper wire.

od150890/2019_2020 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 25 x 6 mm brass bolt & nut

od150891/2019_2020 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 12 x 3 mm brass bolt & nut

od150892/2019_2020 : Supply installation testing and commissioning of Hi wall mounted inverted type 3 star split Air Conditioner with Energy efficient Compressor and wireless Remote control,Clamps for fixing condenser on wall ,copper pipping upto 5 metre in between evaporator and condensor units. etc complete Remote control unit to be fixed on wall. 2.0TR with 5 KVA Voltage Stabilizer having intellegent time delay,use only copper pipes in bewteen condenser unit and room unit etc complete ( 2 no. for ASAP OFFICE, 4 Nos. for IT Room, 1Nos for server room)

od150893/2019_2020 : Supplying and fixing Extra length for copper refrigerant piping for the above installation IF exceeds 5 METRE PER UNIT

od150894/2019_2020 : Supplying and fixing Extra length for Water drain piping for the above installation IF exceeds 5 METRE PER UNIT

od150895/2019_2020 : Supplying and fixing Cyclic digital timer working on 230v 50HZ AC for operating the airconditioners alternatevly in at an interval of 3 hours in the server room

od194673/2019_2020 : Supply,Installation ,testing,commissioning of 3phase 20kVA Online UPS with Battery(12V, 150AH) for 30m backup and all other accessories and all connections etc complete.

od194674/2019_2020 : Supply,Installation ,testing,commissioning of 3phase 3kVA Inverter with Battery(12V, 150AH) and all other accessories and all connections etc complete.

od150898/2019_2020 : Providing and Fixing of Electrical ISI Grade Rubber Mat suitable for 440Volts Switchboards. (6' x 3' x 1/4').

od150899/2019_2020 : Providing and Fixing of Electrical ISI Grade Rubber Mat suitable for 11000Volts Switchboards. (6' x 3' x 1/2').

od150900/2019_2020 : Provide and Fixing of Electrical Grade rubber hand gloves suitable for operation of 11KV Switchgear.

od150901/2019_2020 : Provide and Fixing of 2 Nos fire buckets filled with sand along with stand painted with enamel paint of red colour.

od150902/2019_2020 : Provide and Fixing of L.T./H.T danger sign boards.

od150903/2019_2020 : Providing andFixing of emergency OFF trip push button with front Glass and painted in RED Colour.

od194679/2019_2020 : Supply and fixing of Exit singnage boards

od194680/2019_2020 : Supplying and fixing of Shock treatment chart with glass and teakwood frame on wall as approved by the directorate of electricity in Local/Hindi & English languages.

od194823/2019_2020 : SITC of Automatic sanitary napkin vending machine of the following specifications.Type : Fully Automated, Electronic Model,Programmable, Customizable, Electronic data retrievable,Mounting Method : Wall Mounting,No. of products Columns : Two Vertical Spiral,Product Storage Capacity : Total 78napkins packed in a pack of 3's (thus total 26 packs),Construction : Made out of 1.2 mm thick CRC anti corrosive powder coated steel,Design : Aesthetically well designed with sleek cabinet, 230V/ 50Hz/ 5 Amp, All motors and boards operated on DC, Programming Feature : Pricing programmable in field, Time and date on display - programmable Stock out : No stock- lock out provision,.Customizable : Mechanically Customizable for any product dimension- easily in field Sales data connection: Complete sales data should be collected in Micro- SD card and can be viewed in MS excel on computer.)

od194824/2019_2020 : SITC of Sanitary napkin incinerator of the following specifications.Type : Wall mounted, Auto cut off, Electrically safe, ceramic Insulated,Capacity per cycle : 15 to 20 pads per cycle, Capacity per day : 135 to 180 pads per day,Cycle time : 1 Hr,Housing- External : CRCA Steel of 1.2 m thickness, IP 64 rated, Insulation : Thermal Ceramic Sheet with glass,Insulation : Thermal Ceramic Sheet with glass wool of 4-5 mm thick,Wattage : 1000 WATT,Voltage- 230V,50Hz,Power Saver : AUTO CUT-OFF PROVIDED,Residue Ash : Less than 1 GM per cycle,Temperature Cut - off with LED Display,Heater : Ceramic Heater 1000 WATT,Flue gas pipe provided : 2 mtrs flexible with clamp,

ELECTRICAL HT

od150724/2019_2020 : RMU Installation, testing and commissioning of 11KV electrically Operated 21kA for 3 sec, 630A SF6 Insulated,Ring Main Unit outdoor type (IP-54) with 2 nos motorized Load Break Switch as incomer and 1 no motorized VCB (fully rated earth switch) with fully encapsulated vacuum interrupter panel, 630 Amp continously rated Cu busbar complete with all accessories, protective relays, indicators, Hooter ,battery and battery charger, Manometer for indicating SF6 gas pressure with green zone marked on the scale,provision for padlocking for open, close, earth and test position etc. on a suitable foundation. The RMU must be both side extensible type. The rate quoted shall be inclusive of all the civil works and hoisting to its location,assembling of units,lining up, bolting the units and checking all control wiring.

10.4.4 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm

10.5.4 : Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm

od221841/2019_2020 : Supply of 11KV stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3 kA for 1 sec.), cores laid up, inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS 7098/11/85 with latest amendments & confirming to the GTP of Group A 3C X185SQMM (from HT panel to 250kVA transformer)

od221851/2019_2020 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required:185 sq. mm

8.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm

od150740/2019_2020 : Supply of 11KV stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3 kA for 1 sec.), cores laid up, inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS 7098/11/85 with latest amendments & confirming to the GTP of Group A 3C - 300 Sq.mm(from RMU to HT Panel)

od150743/2019_2020 : Supply of 11KV stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3 kA for 1 sec.), cores laid up, inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS 7098/11/85 with latest amendments & confirming to the GTP of Group A 3C - 300 Sq.mm ( upto RMU)

7.10 : Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate withinscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixingthe same in ground as required.

od195128/2019_2020 : Supply, Installation, testing and commissioning of VCB Panel Board made of 14 SWG CRC Sheet steel enclosed,floor mounting, free standing, steel fabricated, hinge & lock type, painted with 2 coated of synthetic enamel paint. Out door type light grey of shed No 631 & inside Snow white on two coats of anticorrosive metal primer after degreasing & proper cleaning of sheets (IP55).The Panel Board complete with all internal control &metering wiring with copper flexible wire, crimping type sockets. vacuum circuit breaker dust and vermin proof totally enclosed in sheet steel housing, fully inter locked, horizontal draw out and horizontal isolation, indoor truck type with trip free spring closing mechanism with mechanical ON/OFF indicators, earthing terminals automatic safety shutters, complete with auxiliary contacts, resin cast CTs of suitable ratio and accuracy class for protection & metering.Incomer::11kV 630A, 3phase 50Hz,250MVA, VCB-1No Emergency Trip facility-1 Set,PT-11KV/110V,100VA,CL-0.5-1Set,CT Core-2 -80/5,15VA, CL-0.5-1Nos,TOD Meter-1No,Numeric Relay for O/C and E/F-1 Set Bus Bar: 11kV 630A, 3phase 50Hz,Al Bus Bar, 250MVA-1No,Outgoing:11kV 630A, 3phase 50Hz,250MVA, ABSFU-2No,TOD Meter-2No

od195129/2019_2020 : Supply, installation, testing and commissioning of indoor type Unitized Substation enclosure consisting of 11 KV, 250kVA, 11kV/433V 3 Ph, 50 Hz, vector Dyn -11, dry type, Transformer with IP23 and G.I enclosure, winding temperature alarm and trip on transformer compartment and LV chamber suitable for termination of cable, complete with all standard fittings and accessories etc including necessary louvers and as per specifications attached in all respects as required including emergency trip push botton . It shall includes all necessary control cabling for alarm, tripping & indication, all internal cabling as required including emergency trip push botton. The rate shall be inclusive of all materials, lead, lift, necessary civil works etc. complete as per single line diagram & technical specification

od217791/2019_2020 : Providing and fixing fully Solid Vertical Air terminals 16mm rod tapered to 10 mm aluminium rod with Interception Tip at the Top, Fang Fix with base and clamp, Joining Clip, Wall Clamp, etc as required and confirming to IS/IEC -62305

od195130/2019_2020 : Providing & fixing of 50 sq.mm solid aluminium round conductor with necessary holders at required interval as specified below: 8mm solid aluminium round conductor with Parapet Holder made of whether resistant plastic (every 40 cm)

od195131/2019_2020 : Providing & fixing of 50 sq.mm solid aluminium round conductor with necessary holders at required interval as specified below: 8mm solid aluminium round conductor with Down Conductor Holder made of whether resistant plastic(every 80cm)

od195132/2019_2020 : Providing & fixing of 50 sq.mm solid aluminium round conductor with necessary holders at required interval as specified below: 8mm solid aluminium round conductor with Terrace Conductor Fibre Reinforce Concrete Holder( every 100 cm)

od195133/2019_2020 : Providing and fixing of Cross Connector/T Connector/Folding Clamp/Clamping Shoe/ Expansion Piece necessary for fixing solid aluminium conductor

od195134/2019_2020 : Providing Fxing,Laying and clamping at site of copper earthing conductors inclusive providing earthing terminations and bracing of the terminations etc.25x3 earth bunch

od195135/2019_2020 : Providing and fixing of Stainless Steel Test Joint suitable with suitable Outdoor Enclosure: For 8mm dia solid round aluminium conductor & 10mm dia copper coated solid steel round conductor having 100 microns of copper bonding (if pure copper conductor 25x3 mm solid tape also can be used). Conforms to the requirements according to (IS/IEC 62305).

od195136/2019_2020 : 'Providing and laying 10mm round copper bonded steel conductor having 100 microns or 25x3mm solid tape copper conductor from earth electrode directly in ground as required. '

od195137/2019_2020 : Installation of Exothermic Weld Joints for 10mm round copper bonded steel conductor having 100 microns or 25x3mm pure solid tape copper conductor as per IS/IEC 62305. Each under ground joints has to be wrapped with petrolatum- coated chemical fibre fabric having 1.1mm thick and width 50mm.

od195138/2019_2020 : Supply and installation of Copper Bonded Plate Electrodes 1200X1200X12.5 mm with 250 microns copper bonding connecting Copper Bonded Steel Bus Bar of 450x50x6mm , two meter (2 runs) of 10mm copper bonded Steel tape from steel bar to plate with Earth enhancing mineral compound as required.

od195139/2019_2020 : Providing and fixing of 20mm low carbon steel rods of 3(3x1m)m with 250 microns copper bonding, fault current withstand capability of 30 KA rms value for 1 second and I peak of 76 KA, Earth enhancing mineral compound, Exothermic welded Clamp for clamping as suggested as per NBC 2016, Concrete Earth electrode inspection chamber with heavy duty cover of 320mmx 320mmx 190mm with a weight bearing capacity of 50KN.

od163125/2019_2020 : PUBLIC ADDRESS SYSTEM (PRIVATE) Supply, fixing, testing and commissioning of the PUBLIC ADDRESS SYSTEM PRIVATE with folllowing specifications Supply, fixing, testing and commissioning of Ceiling mounted 6W speakers of size 6' with metallic grill.

od163123/2019_2020 : Supply, fixing, testing and commissioning of UHF Wireless Microphone AWM-810UHF

od163124/2019_2020 : Supply, fixing, testing and commissioning of 50W RMS PA Mobile Amplifier made in a compact housing compliant in size with relevant DIN standards. It features a built-in MP3 Player with remote, and has provision for external Mic and AUX inputs. Priority of mic signal over AUX / USB is provided, making it easy to make announcements without readjusting the level controls for music

1.17.2 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

od163126/2019_2020 : PUBLIC ADDRESS SYSTEM (COMMON) Supply, fixing, testing and commissioning of the PUBLIC ADRESS SYSTEM COMMON with following specifications Supply, fixing, testing and commissioning of Ceiling mounted 6W speakers of size 6' with metallic grill.

od163128/2019_2020 : Supply, fixing, testing and commissioning of hand held microphone with cord wire

od163129/2019_2020 : Supply, fixing, testing and commissioning of 4 zone mixer amplifier 200+200 w, with built in media player having LCD display, 6 mic and 2 aux inputs.

od163130/2019_2020 : Supply, fixing, testing and commissioning of 12W box type speakers mounted on the wall

od163131/2019_2020 : SMART CLASS ROOM Supply, fixing, testing and commissioning of the Short though intractive projector,having Brigtness : white 3400 ANSI, Colour :3400 ANSI Lumens, Contast ratio : 16000:1 with WXGA Resolution.The shall have Inbuilt 16W speaker. Max intractivity size : 116' with in 4 feet through writing cum projection board : 90' interactivity , multi touch, surface material : 4mm thik acrylic resin coted steel sheet, gloss @ 60 degree-17 , core material 8mm thik particle bord, adhesive : rubber based adhesive backing material : 02mm thick galvinized steel aluminium powder coated frame . Installtion kit including wall mount 4 feet, 10 mtr power cable , 10 mt vga cable , 10 mtr HDMI cable.

od163133/2019_2020 : Supply, fixing, testing and commissioning of the HDMI Cable of 5mtr length to all monitor points as per the requirement

od163134/2019_2020 : Supply, fixing, testing and commissioning of the HDMI Cable At confrance hall having 10mtr in length and capable for 4K

od163135/2019_2020 : Access Control System 'Supply 'Time and Attendance Software' English Language or latest version with all drives included connecting to existing PC, TCP/IP network feature, Antipass back feature, software for Access control system, Time attendance module, power supply unit with SMF batteries etc. complete as per specifications and as required. The system shall be capable of managing upto 1,000 card holders database and one lakh transactions. '

od163136/2019_2020 : Supply of Exit push button including supply and fixing of suitable size GI wall box 16 SWG complete as required.

od163804/2019_2020 : 'Supply & Installation of Emergency exit push button including break glass enclosure including supply and fixing of suitable size GI wall box 16 SWG complete as required. '

od163137/2019_2020 : 'Supply & Installation of dual Electromagnetic lock complete as required. '

od163138/2019_2020 : 'Supply & Installation of single Electromagnetic lock along with magnetic contact complete as required. '

od163139/2019_2020 : 'Supply & Installation of Proximity Cards Isoprox with sticky ID card, one side 4 colour printing etc. complete as required. '

od163140/2019_2020 : 'Supply & Installation of Fingerprint and Card based Time-Attendance Terminal Cosec Door FOT . Optical Fingerprint and Proximity Card based Time-Attendance Terminal (Card Module is not Included) . Support EM Prox and HID Prox Card Module . Dot-Matrix LCD and Touch sense Keypad . Ethernet and USB Connectivity . Time-Attendance and Cafeteria Application . 50,000 Events and 9,600 Fingerprint Templates . 4 LEDs and Buzzer . 12VDC Power Supply through Adaptor or Battery Backup'

od163142/2019_2020 : TELEPHONE Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit 10pair

1.18.2 : Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair

1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet

1.24.7 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet

1.19 : Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required.

od163145/2019_2020 : Supply, fixing, testing and commissioning of the INTERCOM with Digital EPBX with 32 lines 4 trunk

od163146/2019_2020 : 'Supply and fixing 10 pair 0.51 mm dia telephone tag block ''Krone or equivalent make'' '

od163147/2019_2020 : Supply, installation, testing and commissioning of 20 pair Telephone Connection Box

od163148/2019_2020 : Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit 20pair

od163155/2019_2020 : COMMUNICATION Supply , installation, testing and commisioning of 42 U 19' Network Rack with all round accessibility maded out of heavy duty 700 MMD and depth between 1000 mm and 1200 mm , provided with 4 Nos Cable manager, with power strips of 10 A sockets 10 nos, KeyboardTray, 90CFM cooling fan, hardware kit and all accessories

od163157/2019_2020 : Supplying and fixing of following sizes of PVC casing cap in surface as required. 50mm

od163158/2019_2020 : Supplying and fixing of following sizes of PVC casing cap in surface as required. 32mm

od163159/2019_2020 : Supplying and fixing of following sizes of PVC casing cap in surface as required. 25mm

od163160/2019_2020 : 'Supply and fixing RJ45 Keystone IO jack with cover and face plate, including crimbing/Punching of UTP 4 Pair CAT 6E LAN Cables on both ends with RJ45 Connector. '

od163161/2019_2020 : Supplying and drawing of 6core single mode outdoor armoured OFC 9/125um in the existing surface/ recessed steel / PVC conduit as required.

od163162/2019_2020 : Supply, installation, testing and commissioning of 24 Port Network Switch Manageable PoE[L2].2 x1G combo ports

od163163/2019_2020 : Supply, installation, testing and commissioning of 24 Port Network Switch Manageable PoE[L2].2 x1G combo ports ,2 nos. of fibre port loaded with single mode transciever, should support static routing

od163164/2019_2020 : Supply, installation, testing and commissioning of 24 Port L3 Manageable Network Switch , 4 nos. of fibre port loaded with single mode transciever, should support static routing

od163165/2019_2020 : Supply and installation of 1 U Cat6E 24 Port Modular Loaded patch Panel

od163166/2019_2020 : Supply and installation of CAT6E 2 mtr long Patch cord factory crimped on both sides

od163167/2019_2020 : Supply and installation of CAT6E 1mtr long Patch cord factory crimped on both sides

od163168/2019_2020 : Supply , installation, testing and commisioning of 9U 19' Network Rack to mount on wall , provided with 4 Nos Cable manager, with power strips of 10 A sockets 6 Nos, , cooling fan and all accessories

od163169/2019_2020 : Supply , installation, testing and commisioning of 15U 19' Network Rack to mount on wall , provided with 4 Nos Cable manager, with power strips of 10 A sockets 6 Nos, , cooling fan and all accessories

od163852/2019_2020 : Supply, fixing, testing and commissioning of the WIFI, Access point with 450Mbps on 2.4GHz bandwidth & 867Mbps on 5GHz bandwidth,total of 1317Mbps speed compatable with 802.3af and passive PoE. Centralized Software Controller Monitor and manage hundreds of EAPs in a single or multiple sites.Free cloud access to manage from anywhere, anytime.Configure and automatically synchronize unified wireless settings to all EAPs in the network.Secure Guest Network with Facebook Wi-Fi and SMS Authentication

1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

od195362/2019_2020 : CCTV Supplying ,installation,testing and commissioning of 2MP IP Indoor 1080P Dome Camera, PoE H.265+,Fixed 3.6mm Lens for 83° angle of view, 98ft Night Vision, DWDR, Built in Web Server allows remote viewing over network via smartphone, tablet, or PC/MAC, ONVIF Compatible'

od195363/2019_2020 : Supplying ,installation,testing and commissioning of 4MP IP Indoor 1080P Dome Camera, PoE H.265+,Fixed 3.6mm Lens for 83° angle of view, 98ft Night Vision, DWDR, Built in Web Server allows remote viewing over network via smartphone, tablet, or PC/MAC, ONVIF Compatible'

od195364/2019_2020 : Supplying ,installation,testing and commissioning of 32 channel NVR with, H.265+ dual codec decoding, Up to 8Mp resolution preview and playback, Max 200Mbps incoming bandwidth, Support 4 SATA HDDs up to 24TB, 2 USB(1 USB3.0), 2 RJ 45 Port, HDMI / VGA simultaneous video output, Support Multi-brand network cameras, ONVIF Version 2.4 conformance, Recording, PTZ, Tour, Alarm out, Video Push, Email, FTP, Snapshot, Buzzer & Screen tips and with 4 Nos 6TB Internal Hard drive.

FIRE FIGHTING

od210592/2019_2020 : 'Supply, installation, testing and commissioning of Monobloc type terrace pump of capacity 450LPM 35M Head with Cast Iron body and SS Impellers, pump close coupled to a squirrel cage induction motor, totally enclosed fan cooled type developing, 415 V 50 Hz, 2900 RPM suitable for foot mounted type including foundation bolts etc complete. '

od231572/2019_2020 : 'Supply, installation, testing and commissioning of motor starter panel with 200A 4P ISOLATOR as incomer and 2No 100A 4P INCOMER , 2No 25A 4p ISOLATOR as outgoing for suitable HP booster pump, 10 sqmm AYFI Cable fully automatic STAR DELTA/DOL starter with over load protection, current sensing type single phase preventor, ON / OFF push buttons and indicating lamps, digital type ammeter & voltmeter, pump running / trip indications etc complete with all accessories and internal wiring with suitable copper wire etc including one set of wired remote push button station in the fire control room at ground level. Panel shall be fabricated out of 16 SWG CRCA Sheet, provisions for cable top/bottom entry, powder coated in fire red shade with weather proof enclosures and made functional. '

od150731/2019_2020 : Supply of 2C X 1.5 sq mm Copper Cable from terrace level starter panel to the remote push button station at ground floor.

7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

od150738/2019_2020 : Supply of 4 C x 10 Sq.MM armoured aluminium cables with ISI mark, including suitable double earthing as per KSEI standards, complete and made functional.

9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

od150746/2019_2020 : Supply,erection,laying,testing and commissioning of Galvanised Iron C class (Heavy) ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe size 200 MM to 65 MM dia with all factory fabricated fittings such as GI Hot dip heavy grade bends, flanges, nut & bolts etc. and supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zincchromate industrial primer and two coats of IS approved colour code. For pipes of dia 200 mm and above IS:3589, upto 200 mm dia IS: 1239 with ISI mark. 100MM DIA Galvanised Iron C class (Heavy) ERW pipes with ISI Mark complete

od227353/2019_2020 : Supply,erection,laying,testing and commissioning of Galvanised Iron C class (Heavy) ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe size 200 MM to 65 MM dia with all factory fabricated fittings such as GI Hot dip heavy grade bends, flanges, nut & bolts etc. and supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zincchromate industrial primer and two coats of IS approved colour code. For pipes of dia 200 mm and above IS:3589, upto 200 mm dia IS: 1239 with ISI mark. 80MM Dia

od227399/2019_2020 : Supply,erection,laying,testing and commissioning of Galvanised Iron C class (Heavy) ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, Pipes of size 50 MM and below shall be with THREADED piping work with Ductile Iron FM/UL listed fittings. Piping shall have one coat of anticorrossive zincchromate industrial primer and two coats of IS approved colour code. 25MM Dia

od150749/2019_2020 : Supply, fabrication and erection of MS Structural Steel Supports for piping work with ISMC / ISA with required MS Plate of minimum 8 MM TCK in structures/ceiling including necessary anchor fasteners, applying one coat of epoxy primer and epoxy paint etc and made functional.

od210625/2019_2020 : Supply, Installation, Testing and Commissioning of Galvanised Iron C class (HEAVY) ERW pipes with ISI Mark (IS 1239/3589) complete with all accessories such as bend, reducers, tees etc, including excavation in foundation trenches or drains including dressing of sides and ramming of bottom, and getting out extra excavated soil and back filling of trenches with available excavated earth, consolidated layer by ramming and watering etc. Pipes shall be coated with two coats of asphaltic primer and wound with polymeric mix ( 4 MM Tck) of reputed make and supported at standard intervals and at all tee joints, bends/ offsets etc. 100 mm dia

od150757/2019_2020 : BUTTERFLY VALVE Supply, Installation, Testing and Commissioning of PN 1.6 (16 Kg/Sq.CM) rated wafer type Butterfly Valves of the following sizes. Valves shall be provided with Black Nitrile rubber integrally moulded onto the body as body seat, Nylon coated SG Iron disc with flow control lever, stainless steel disc & stem, conforming to IS 13095 class 1 with ISI mark. 100 MM Dia

od150763/2019_2020 : NON-RETURN VALVE Supply, Installation, Testing and Commissioning of PN 1.6 (16 Kg/Sq.CM) rated Double Flanged Non Return Valves, dual plate type with cast iron body, complete with all accessories such as nut and bolts etc, tested to 1.5 times working pressure and made functional. 100 mm dia

od150768/2019_2020 : HYDRANT VALVE Supply, Installation, Testing and Commissioning of Stainless Steel SINGLE HEADED type 63 MM dia Hydrant Valve, 80 MM Dia flanges drilled conforming to IS: 5290 with ISI mark, oblique type with female instantaneous hose coupling adaptor made as per IS 903 with ISI mark, complete with cast iron wheel valve, blank cap and chain with ISI mark Internal

od227253/2019_2020 : Supply, Installation, Testing and Commissioning of Stainless Steel SINGLE HEADED type 63 MM dia Hydrant Valve, 80 MM Dia flanges drilled conforming to IS: 5290 with ISI mark, oblique type with female instantaneous hose coupling adaptor made as per IS 903 with ISI mark, complete with cast iron wheel valve, blank cap and chain with ISI mark External

od150770/2019_2020 : BRANCH PIPE Supply & Installation of stainless steel short Branch Pipes 63 mm, conforms to IS: 903 with ISI mark complete with 20 mm bore hexagonal based nozzle.

od150772/2019_2020 : FIRE HOSE Supply Installation testing and commissioning of Fire Fighting Delivery Hoses, Reinforced Rubber Lined type, jacket made up of 100% synthetic yarn heat and abrasion resistant, having 35.7 kg/sq. cm burst pressure, 22 kg/Sq.cm proof pressure and 14 kg/sq. cm working pressure, in 15 Mtrs of length, as per IS 636 type A, 63 mm inside diameter, coupled with Stainless Steel hose coupling adaptors of instantaneous pattern, pair of male and female parts as per IS 903, 63 mm dia and made functional. Hose & couplings with ISI marked.

od150774/2019_2020 : SINGLE DOOR HOSE CABINET Supply & Installation of Hose Cabinets to accommodate one piece of hose pipe along with one pair of male and female coupling and one branch pipe. The cabinet is made up 18 SWG CRCA sheet metal, with single door and glass fronted hinged doors and lock, powder coated to PO red colour. Locking arrangements of the cabinets shall be provided in the front side of the box with a glass covering to access easily.

od150777/2019_2020 : HOSE REEL Supply, Installation, Testing and Commissioning of first aid hydraulic Hose Reel meeting British Standard (European standard) BS EN 671-1 and Australian Standard AS 1221EN 671-1 standards, compact type complete with swing type drum, including 25 mm dia PVC rigid braided hose in 30M length, and are designed to provide a flow rate 35 LPM for 1' at 0.2Mpa, factory fitted 25 mm bore shut off nozzle and all other necessary fixing materials fitted in vertical rising mains / walls/ structures with U Bolts or with M 12 anchor bolts. ISI marked hose reels (both drum & Hose) with 36.50 M hose and GM Chrome plated/SS nozzles can also be provided.

od150780/2019_2020 : BALL VALVE Supplying, installing, testing and commissioning of Chromium plated bronze Ball Valves with necessary fittings of screwed end type with ISI mark. 25 mm Dia

od150783/2019_2020 : FIRE BRIGADE INLET Supply, Installation, Testing and Commissioning of Cast Iron body readymade type Fire Brigade Collective Breaching with 4 nos (twin Siamese) built in gun metal 63 mm spring loaded check valves, 150 mm/100mm flanged outlet connection and for connecting to sump and main header complete with all hardware items. One No 25 MM gate valve to be fitted on the top of the inlet valve.

od150784/2019_2020 : AIR RELEASE VALVE Supply, Installation, Testing and Commissioning of Air release valves spring loaded type, tested to a working pressure of 16kg/Sq cm with Gun metal body, having screwed end 25 mm dia.

od150786/2019_2020 : FIRE RATED DOORS Providing and fixing of 1 Hrs Fire Rated Door with PANIC BAR, with cool-rolled steel sheet, viewing glass of 200x300x7.2 MM, fire rating time of 135 Minutes, fire proof lock and 6 piece visible hinges of 180 degree, door closer etc and fully powder coated in standard colour requirements of the Client, etc and made functional.

od150787/2019_2020 : DUCT DOORS Providing and fixing of Sheet metal duct door for the fire ducts, size 1500 x 900 x 150 MM, fabricated from 16 SWG GI CR Sheet & 18 SWG shutter, sheets (TATA make) fully powder coated as per standard colour requirements of the Client with door handle, hinges and locking arrangements.

od150788/2019_2020 : METAL SHEET Providing and fixing sheet metal steel with angle iron frame for sealing fire ducts in all floor levels to prevent spreading of smoke/fire to upper floors, using 5MM chequered Sheets in floor levels, to be fixed in fabricated angle supports of 40 MM, cutting and re-fixing the sheets as per standard requirements etc. cement plastering to seal the gap between wall and frame etc. and made functional.

od150789/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification. Passenger Lift sign board 12' x 4'

od150790/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification. Fire Exit sign board 12' x 4' with arrow markings

od150791/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification. Fire Duct sign board 12' x 4'

od150792/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification. Electrical Duct sign board 12' x 4'

od150793/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification. Main Stair sign board 12' x 4'

od150794/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification. Fire Stair sign board 12' x 4'

od150796/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification. Floor display sign board 12' x 4'

od150798/2019_2020 : DRY CHEMICAL POWDER Supply and installation of Dry chemical powder type ABC Stored Pressure Fire Extinguishers complete with initial charges of Mono Ammonium Phosphate 50% based silicon coated powder, pressure indicating gauge, discharge hose, wall mounting brackets etc. and with ISI mark. 6 Kg Capacity

od150802/2019_2020 : CO2 FIRE EXTINGUISHER Supply and installation of CO2 type Fire Extinguishers of following capacity Conforming to IS: 13849 with initial gas, filled in steel cylinders, safety valve with lock, discharge hose and horn etc and with ISI mark. 4.5 Kg Capacity

od150803/2019_2020 : ABC DRY POWDER FIRE EXTINGUISHER providing and fixing Fire Abc Dry Powder Modular Fire Extinguisher 5 Kg Capacity

od150804/2019_2020 : STATUTORY APPROVAL Complete services from the contractor for liasoning works such as filing necessary applications, submission of forms for approval to local fire authorities, depositing the fees / other amounts as required for getting the premises / installations, inspected and approved and all other formalities required till approved by Local Fire Authorities. All the expenses incurred in this regard shall be borne by the Contractor. The official payments to be made for any security deposit etc. in this regard which shall be reimbursed on production of original voucher.

DIESEL GENERATOR

od231009/2019_2020 : DOCUMENTATION AND APPROVAL 'Charges for Preparation of all drawings submitting and getting approval from Electrical Inspectorate, submitting of Completion certificates and arranging inspection, getting sanction and energisation certificates from Electrical Inspectorate & KSEB, obtaining power allocation & power connection etc. for commissioning of the whole installation in the premises including generator, Lift panel etc. All statutory payments will be reimbursed on production of the original receipts. (for modification works) '

od150750/2019_2020 : Supply & Fabrication with steel sections and erection of MS base frames , MS angle channels , flat etc for supporting exhaust piping, etc. Including welding, bolting, chipping , grouting etc, including applying one antirust coat of approved primer and two finished coats of approved paint , breaking and finishing of walls, floors etc. The scope is inclusive of minor civil work as required, supply & installation of GI hardware materials, consumables, anchor fasteners, tools & tackles and necessary labour with supervision but not limited to, and complete as per approved drawings,

od150755/2019_2020 : Trial run of DG set for 6 hrs. on no-load and variable load condition and to record the parameters as per prescribed format. Cost of consumable ( fuel oil, lube oil, etc.) to be borne by Contractor.

od150758/2019_2020 : Supply, Installation,Testing and commissioning DG set control panel with all engine protection equipments, indications etc The DG set shall be suitable for AMF operation including all necessary control cabling From DG set to AMF panel. The DG set control panel shall have 250A, 25kA TPN thermal magnetic type MCCB with OL, SC and EF protection, RYB, on/off indication lamp, voltmeter, ammeter, energymeter, frequency meter etc The Low set earth fault relay shall be provided in control panel with CT of 50/5A 10VA Cl. 5P10 at DG neutral.

od150761/2019_2020 : Supply, Installation,Testing and commissioning of 160KVA, silent type, water cooled, radiator type, four stroke, electric start D.G Set with acoustic enclosure and standard control panel. The engine shall be capable of taking 10% overload for one hour after 12 hours of continuous operation. The DG shall be suitable for AMF operation. The alternator shall be brushless, self excited, self regulated, SPDP enclosure, class F/H insulation, suitable for continuous operation at 1500 rpm, generating 415 V +/- 5% at 0.8 p.f, 50Hz, 0.85 load factor, 3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722.

od150732/2019_2020 : Design, manufacture, supply, installation, testing and commissioning of Gearless, machine room less Passenger lifts of capacity 13 passengers for (G+2) storeyed Building with the following specifications: Location of Lifts : Inside the building i) Speed : 1.0 MPS ii) Floors : 3 floors (GF+FF+SF) iii)Travel : 8.70 Mtrs (approx.) iv) Stops - 415 V, 3 phase, 50 Hz, 4 wires system ix) Type of doors a) Car : Power operated centre opening horizontal sliding stainless steel scratch proof (Honey Combing finish) b) Landing doors: Stainless Steel with Honey Combing Finish. c) Flooring: PVC Flooring. VVVF drive control for constant load of 884 Kg respectively traveling @ 1 mps with Simplex operation with out attendant, car position indicators, battery operated alarm bell and emergency light, power operated centre opening automatic sliding stainless steel doors for car entrance and hoistway entrance etc. including all steel, civil and electrical materials as specified such as machine beams, buffer support channels, facia plates, landing sills, pit ladder metal screen in elevator pit etc., as per the specification including cost of all civil and electrical works required for installation of elevator in the existing lift well and machine room, scaffolding, cutting holes, grouting and making good to damages in wall, floor, ceiling etc. for fixing accessories, foundation bolts etc., hoistway wiring and other associated Wirings including Fireman's switch complete in all respect as per direction of Engineer-in-charge

od150736/2019_2020 : Supply of all required spares and Annual Comprehensive Maintenance Contract (Annual Maintenance Contract (AMC) for 5(five) years after expiry of the guarantee period) beyond the expiry of the guarantee period including cost, conveyance, loading, unloading, royalties, taxes all materials and cost all labours, sundries, T&P required as per the direction of the Engineer -in -charge.

ADMINISTRATIVE BLOCK

CIVIL WORKS

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

od152230/2019_2020 : Extra for additional lead upto 1km

od152235/2019_2020 : Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or at contractors risk, for all leads including all lifts involved.

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

od152245/2019_2020 : Supplying and filling in plinth with stone dust(quarry dust) under floors, including watering, ramming, consolidating and dressing complete.

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

2.34.1 : Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%

2.35.3.1 : Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.17 : Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

4.13 : Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

5.37.1 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All wiork upto plinth level

5.37.2 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All work above plinth level upto floor V level

5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).

5.35 : Add for using extra cement in the items of design mix over and above the specified cement content therein

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide

od181501/2019_2020 : Providing telescopic props up to a max. height of 4.5mtr at a spacing of 2mtr as support to decking sheets and wherever necessary as per instruction of engineer in charge including all materials, labour charges etc.

od152289/2019_2020 : Prefabricated structural steel work riveted, bolted or welded in built up sections, trusses,Built-Up / HR sections / Bracings and framed work including supply & fixing of anchor bolts & base plates,cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and epoxy painting 2 coatswith approved quality epoxy paint all complete. Also nessary frame work for vent openings 3 Nos (1.00x0.60 size) and claddings including mm deck sheet.The Steel structure is to be designed fabricated,supplied and errected through Pre Engineering and the design shall be got approved from client.

od162574/2019_2020 : Providing and fixing in position metal decking sheet 1mm thick as per approved thickness or supporting RC slab including edge trim cutting, trimming, fixing, leak proofing of joints with necessary stud type shear connector etc. complete.

od162576/2019_2020 : Providing and fixing in position 12mm thick of shalitex board at various joints such as isolated joints at well edge and column junction as per project engineers instruction with winsil neutral base sealent manufactured by GE silicon as per manufactures requirements etc. complete

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor Vlevel with RCC band at sill level and lintel level with approved block laying polymermodified adhesive mortar all complete as per direction of Engineer-in-Charge. (Thepayment of RCC band and reinforcement shall be made for seperately).

6.4.1 : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:4 ( 1 cement : 4 coarse sand)

10.26.1 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

od181982/2019_2020 : Providing of 35mm thick Factory made Pre-laminated ABS (Acrolynitrile Butadyne Styrene)Door shutter consisting of all round Frame made out of water proof solid foam PVC bar of size20x32mm, reinforced by 32x 32mm vertical made out of LVL (Laminated Veneer Lumber), corematerial of 32 mm thick high density craft paper honeycomb board, sandwiched on both sides withpre-laminated ABS sheet thickness of 1.5mm . The shutter should have PVC edge banding of size0.45mm on the vertical & bottom sides. The shutter to be fixed to pre-laminated FPVC (FoamedPolyvinyl Chloride) Door frame of the size 105x40mm with a wall thickness of 10mm made out ofextruded rigid FPVC profile, mitre joined with 6 Nos. of 50mm steel screw ,GI stiffners of roll formed'U' GI channel of size 29x9x1mm, 150mm long at each hinge point and frame reinforcement of rollformed 'U' GI channel of size 46x22x.06mm) should be provides. The frame should have a bottomtie rod of 'U' GI chanel size of 15x15x1mm . The shutter shall be fixed to the door frame usingButtefly hinges & tower bolt,door stopper, hydraulic door closer ,cutting for vision panel of SS finishand shall be provided with mortise lock with handles of approved make. The door frame shall befixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners andcovered with screw caps

21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

od182151/2019_2020 : Providing and fixing stainless steel door handles of 60cm size, door stopper, [H shape] lock 1 pair of approved make complete as per direction of engineer in charge

od182133/2019_2020 : Providing and fixing aluminium Structural glazing system with Single Glass of approved make having main frame of vertical of 100mm55mmx2mmthick and horizontal75mmx55x2mm or sections available above nearest size made out of specially designed extruded aluminium sections of approved brand to withstand wind pressure as per BIS code and fabricated, fixed at all levels, elevation and heights to the Masonry / RC walls with necessary clamps, brackets and anchor fasteners. All clamps and brackets shall be Mild Steel Hot dip galvanized minimum 80 microns thick and shall conform to IS: 4759-1996. The extruded aluminium section shall be anodised in approved colour with an anodic coating of minimum 15 microns. Extruded section shall be of 6063 T5 or T6 alloy conforming to ASTM B 221. Any other fastening straps, nuts, bolts, rivets, washers, etc. shall be in stainless steel SS 304 grade. All tapes shall be of Norton/3M make. Vendor to prepare detailed shop drawings/ fabrication drawings based on elevation / architectural drawings, with all details and submit to Client for obtaining necessary approval prior to commencement of work

od182134/2019_2020 : Providing and Fixing, uPVC factory made, white colour casement/sliding window, Louvers and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 +- 0.2mm thick galvanised steel profile to be included in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per direction of Engineer-in-charge. The Rates inclusive of 6mm Glazing, Louvers, Locks, hardware hinges and fitting etc.

od193388/2019_2020 : Providing and fixing metal door frames and shutters made up 120 minute Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-incharge of galvanized steel (base steel as per IS 513) of 1 mm thick for shutters & 1.6mm thick for frames,galvanized as per IS 277 (with Zinc at 120 GSM) powder coated with pure polyester powder upto 60-90 microns thick in standard RAL paint colour of client choice. Outer frame section should be of 100x50 mm x 1.6 mm thick. Shutter section should be of 1.00 mm thick galvanized steel sheet pressed to provide a 46 mm thick fully flush, double skin door shell with seam joints at stile edges. Honeycomb kraft paper resin bonded with macroplast UR 7221 glue should be used as infill to give the required rigidity and effective acoustic insulation. The shutter should have provision to hold fire rated vision panel SCHOTT PYRAN® STAR GLASS CERAMIC 2Hrs Fire Rated Glass Schott Pyran with UL Logo Frame & ceramic Beadingsor approved equivalent of size 200x300x5mm. The shutter should be provided with Assa Abloy Yale Fire Rated Mortize Lock ,panic bar with both side key & Lever Handle + 70mm DP SN S ( AA5103 6072-F+YTL 010) or approved equivalent. The shutter to be fixed withAssa Abloy YALE Surface hydraulic Door Closer size 2~4, Adj Arm, Fire rated-DCR-1824 FR finish silver UL certified or approved equivalent. The shutter is to be fixed to the door frame using Assa Abloy Yale (4''x3''x3mm) Ball bearing Butt Hinges -3S2BB403030-CE MARKED, Grade SS 304 - Finish SSS or approved equivalent. The frame is to be fixed to the concrete/masonry wall by means of MS Electroplated Anchor Bolt with end caps a,d sealed with Silicon and panic bar Sealant..Hollow Metal Pressed Steel (Fire Rated) Single shutter Door Frame & Shutter PYRAN or equivalent. etc. complete

25.3 : Providing, assembling and supplying vision glass panels (IGUs) comprising ofhermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel unitsof size and shape as required and specified, comprising of an outer heatstrengthened float glass 6mm thick, of approved colour and shade with reflectivesoft coating on surface # 2 of approved colour and shade, an inner Heat strengthnedclear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primaryseal and secondary seal (structural silicone sealant) etc. all complete for the requiredperformances, as per the Architectural drawings, as per the approved shopdrawings, as specified and as directed by the Engineer-in-Charge. The IGUs shallbe assembled in the factory/ workshop of the glass processor. (Payment for fixingof IGU Panels in the curtain glazing is included in cost of item No.26.2) For payment,only the actual area of glass on face # 1 of the glass panels (excluding the areas ofthe grooves and weather silicone sealant) provided and fixed in position, shall bemeasured in sqm.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating onface # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved makehaving properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflectioninternal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performanceglass shall be decided by technical sanctioning authority as per the site requirement

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

od152305/2019_2020 : Pre polished Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

8.12 : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

8.13.1 : Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye orequivalent.

8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

11.20.3 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement

od183344/2019_2020 : Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for indoor floor laid on 20mmthick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting thejoints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge.

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

13.29.3 : 18 mm thick plain cement mortar band in cement mortar 1:4 ( 1 cement : 4 fine sand):Raised Band

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od152306/2019_2020 : Providing and applying intumescent fire retarding paints of required thickness to achieve fire rating of two hour to exposed steel work at any height in its finally erected position as per manufacturer's recommendations over the primered surface of steel structure on its finally erected position along with the 60micron thickness Polyurethane paint of required color as top coat.

od152307/2019_2020 : Providing and applying of factory blended vermiculite cement with fire protective additives and fillers as bonding and reinforcing agents designed to adhere firmly to elements with a fire rating of 2 hours as per manufacturer's recommendations over the primered surface of steel structure on its finally erected position.

13.58 : Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant .

od183042/2019_2020 : supplying,fabrication and erection of FunderMax & Laminates for gate ceiling ( is high-quality construction product that is available in large format panels for Cladding balconies and building facades. )FunderMax Exterior panels are Duromer High Pressure Laminates (HPL) as per EN 438-6, type EDF with extremely effective weather protection. The weather protective coating consists of double hardened acrylic polyurethane resins. They are produced in laminate presses under high pressure at high temperature.)

od183043/2019_2020 : Providing and applying of texture paint as per manufacturers specifications.

od152308/2019_2020 : Providing wire mesh over recessed area for making good the surface and plastering

od185382/2019_2020 : Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement : 4 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer - in- Charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer in Charge

od185383/2019_2020 : Supplying and filling in plinth with m-sand under floors, including watering, ramming consolidating and dressing complete

od185384/2019_2020 : Providing and laying cement concrete in sunken floor, terrace floor etc. up to floor five level, including the cost of grading and finishing:1:11/2:3 (1 cement : 11/2 coarse sand :3 graded stone aggregate 12/6 mm nominal size)

22.20.1 : Providing and laying APP ( Atctic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non- woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. OVER the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under: Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5CM. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be up to - 2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane:3 mm thick

od152312/2019_2020 : Providing and fixing toilet cubicle of standard dimension which includes 600 mm door size width made of heat,bacteria,water, chemical,stratch,impact, anti bacterial resistant 18 mm thick soild compact laminate panels tested by shriram test house.finish of the compact laminate should be suede/raw silk,which includes doors,pilaters and intermediate panels finished with approved texture/shade as per the detail drawings and as per IS 2046 indian standard and as per fire retardant BS-476/97 standard.The product should have Green guard Certificate. this also includes providing and fixing in position necessary hardware made out of stainless steel(grade 304) as per manufactures specification and Architects instruction like (1)door knob (2)gravity hinges(3)Thumb turn lockset indicators (4) coat hooks (5)U- channel, (6)SS shoe box plate(7)MS plate base (8) Rubber noise deafening tape (9)screws and wall plugs. All srews of 304 grade in stainless steel with satin finish.All pilasters area supported by MS- base steel bottom cladding with stainless steel shoe box plate.The base of the stainless steel shoe box will be anchored to the floor with a clearance height upto 110 mm.fixing of intermediate panels to the wall shall be stainless steel 'L' bracket or stainless U channel section are fixed into wall with srew inzerts..

12.52.3 : Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit.

SITE DEVELOPMENT

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.33.2 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth

2.7.2 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (requiring blasting)

2.7.3 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (blasting prohibited

2.1.1 : Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.37.1 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All wiork upto plinth level

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.12 : Providing, hoisting and fixing up to floor level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)

13.9.1 : Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

16.1 : Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

od186185/2019_2020 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of 6 mm metal, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

od186275/2019_2020 : Painting two coats on kerbs in black and white or yellow after filling the surface with synthetic enamel paint complete specifications and as directed by the Engineer-in-charge.

16.90 : Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

COMPOUND WALL

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level

5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

13.5.1 : 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand)

13.30 : 18 mm thick moulded cement mortar band in two coats under layer 12 mm thick with cement mortar 1:5 ( 1 cement : 5 coarse sand) top layer 6mm thick with cement mortar 1:4 ( 1 cement : 4 fine sand).

od183043/2019_2020 : Providing and applying of texture paint as per manufacturers specifications.

13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

SECURITY CABIN

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide

5.37.1 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All wiork upto plinth level

5.37.2 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All work above plinth level upto floor V level

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor Vlevel with RCC band at sill level and lintel level with approved block laying polymermodified adhesive mortar all complete as per direction of Engineer-in-Charge. (Thepayment of RCC band and reinforcement shall be made for seperately).

6.1.1 : Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)

od152233/2019_2020 : Providing of 35mm thick Factory made Pre-laminated ABS (Acrolynitrile Butadyne Styrene) Door shutter consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honeycomb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm . The shutter should have PVC edge banding of size 0.45mm on the vertical & bottom sides. The shutter to be fixed to pre-laminated FPVC (Foamed Polyvinyl Chloride) Door frame of the size 105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile, mitre joined with 6 Nos. of 50mm steel screw ,GI stiffners of roll formed 'U' GI channel of size 29x9x1mm, 150mm long at each hinge point and frame reinforcement of roll formed 'U' GI channel of size 46x22x.06mm) should be provides. The frame should have a bottom tie rod of 'U' GI chanel size of 15x15x1mm . The shutter shall be fixed to the door frame using Buttefly hinges of SSS finish and shall be provided with mortise lock with handles of Godrej or approved equivalent make. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners and covered with screw caps.

od182134/2019_2020 : Providing and Fixing, uPVC factory made, white colour casement/sliding window, Louvers and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 +- 0.2mm thick galvanised steel profile to be included in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per direction of Engineer-in-charge. The Rates inclusive of 6mm Glazing, Louvers, Locks, hardware hinges and fitting etc.

13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

12.51.6 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Gutter (600 mm over all girth)

13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.40 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

PLUMBING AND SANITARY

od152226/2019_2020 : Providing, Fixing, Testing and Commissioning at site Wall Mounting type water closet with P trap & its all fittings like rag bolts, solid plastic Seat cover etc and Concealed flushing cistern, brass screws, nuts , and washers complete including cutting and making good the walls and floors wherever required. Etc complete.

od152228/2019_2020 : Providing, Fixing, Testing and Commissioning at site Handicapped Wall mounting water closet with P trap & it's all fittings like rag bolts, solid plastic seat cover etc., and Concealed flushing cistern, brass screws, nuts, and washers. Flat back Wash Basin with half pedestal with accessories Flexible Connection tube, 32 mm C.P. brass waste coupling, rag bolts. With 1 health faucet, 2 Angle valves, 1 Pillar tap,1 Bottle trap, 2 Grab bars ,1 Hand rail & complete including cutting and making good the walls and floors wherever required. Etc complete.

17.1.1 : Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

od152231/2019_2020 : Providing, Fixing, testing and commissioning at site Wash Basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. Oval Wash basin Counter Top

17.5.1 : Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern

18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

17.31 : Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

17.32.4 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

18.50.1 : Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore

17.10.1.3 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 200 mm

17.70.1 : Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms

17.70.2 : Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms

od152254/2019_2020 : Providing, Fixing CP Robe Hook with fixing screws

17.34.1 : Providing and fixing toilet paper holder:C.P. brass

17.71 : Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

17.72 : Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms

od152256/2019_2020 : 'B SOIL, WASTE, VENT & RAIN WATER PIPES Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, door bends, junctions, cowls, etc., laid under floor/fixed on walls, and in pipe shafts, universal clamps & anchor fasteners(8mm), threaded rod (8mm),nuts, washers, wherever required etc. complete. (In Shaft)' 110 mm O.D. (SWR Type-B)

od208606/2019_2020 : B SOIL, WASTE, VENT & RAIN WATER PIPES Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, door bends, junctions, cowls, etc., laid under floor/fixed on walls, and in pipe shafts, universal clamps & anchor fasteners(8mm), threaded rod (8mm),nuts, washers, wherever required etc. complete. (In Shaft) 50 mm O.D. (SWR Type-B)

od208607/2019_2020 : 'B SOIL, WASTE, VENT & RAIN WATER PIPES Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, door bends, junctions, cowls, etc., laid under floor/fixed on walls, and in pipe shafts, universal clamps & anchor fasteners(8mm), threaded rod (8mm),nuts, washers, wherever required etc. complete. (In Shaft) 75 mm O.D. (SWR Type-B)

od208697/2019_2020 : Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type A) (IS:13592) or ( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, etc. complete. (For Rain water pipes ) 75 mm O.D ( 4Kg/cm2) Vent pipe in shaft

od152260/2019_2020 : Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type A) (IS:13592) or ( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, etc. complete. (For Rain water pipes ) 110mm O.D Type A

od152262/2019_2020 : Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, clamps, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete. (For Internal waste line) 110mm

od152263/2019_2020 : Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, clamps, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete. (For Internal waste line) 75 mm

od152264/2019_2020 : Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, clamps, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete. (For Internal waste line) 50 mm

od152268/2019_2020 : 'Providing, Fixing, testing and commissioning at site in position Deep Seal UPvc fabricated Multi floor trap (7"), with suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. complete in all respects. 50/75 mm dia outlet (In Ceiling)

od152270/2019_2020 : Providing,Fixing, testing and commissioning at site 150x150 mm square C.P. cast brass or stainless steel anti cockroach grating cover SS (304) of matching size of UPvc fabricated floor trap / multi inlet trap complete in all respects.

od152272/2019_2020 : 'Providing, Fixing, testing and commissioning at site in position Concealed floor trap (7"Deep Seal UPvc fabricated Multi floor trap with Stainless Steel Square frames (150x150mm) SS (304), Rubber Seal and flat round cover with screw and suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. complete in all respects. 50/75 mm dia outlet (For Urinals In Ceiling)'

od152274/2019_2020 : Providing, Fixing, testing and commissioning at site in position Floor clean out with Stainless Steel Square frames SS (304), Rubber Seal and flat round cover with screw. complete in all respects. 110mm dia (4")

od152275/2019_2020 : Providing, Fixing, testing and commissioning at site in position Floor clean out with Stainless Steel Square frames SS (304), Rubber Seal and flat round cover with screw. complete in all respects. 75mm dia (3")

od209034/2019_2020 : 'Supplying, installing, testing and commissioning at site in position PVC Roding Eye (6kg/cm2) Complete in all respects.' 75mm dia

od209035/2019_2020 : 'Supplying, installing, testing and commissioning at site in position PVC Roding Eye (6kg/cm2) Complete in all respects.' 110mm dia

od209036/2019_2020 : 'Providing, Fixing, testing at site in position 160mm dia square /circular grating Terrace rain water outlet (Cast Iron) (for 110mm dia pipe)'

18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes

18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes

od209343/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 50 mm dia.nominal outer dia pipes.

od209344/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 40 mm dia.nominal outer dia pipes.

od209345/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 20 mm dia.nominal outer dia pipes.

od209360/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 62.5 mm dia.nominal outer dia pipes.

od209361/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 25 mm dia.nominal outer dia pipes.

od209362/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 32 mm dia.nominal outer dia pipes.

od209408/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-80 ) of approved make For Pumping line from ( Sump Tank To Over head Tank) complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) 2" (62.5mm Outer dia) dia

18.18.2 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore

18.18.3 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore

od152281/2019_2020 : Providing and Fixing Ball Valves (Brass) of approved quality, High or low pressure, with plastics floats complete: 50mm nominal bore

18.19.4.2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreVertical

od209469/2019_2020 : Providing, Fixing, testing and commissioning at site Puddle Flange fabricated from Upvc ASTM Grade sch-40 pipes & uPVC sheet (600 mm long) 4"(100mm) dia

od209470/2019_2020 : Providing, Fixing, testing and commissioning at site Puddle Flange fabricated from Upvc ASTM Grade sch-40 pipes & uPVC sheet (600 mm long) 2" (50mm) dia

od152285/2019_2020 : Providing, Fixing, testing and commissioning at site in positions automatic Air Release Valves, ball valves of approved quality and make on the top of the vertical water supply pipes as per specification and drawings 3/4'(20mm) dia

od152286/2019_2020 : Providing, Fixing, testing and commissioning at site in positions Brass Y Strainer, of approved quality and make as per specification and drawings. 2 ½"(65mm) dia

od226125/2019_2020 : Providing fixing testing and commissioning of water meter and stop cock in pvc pipe line with direct reading dia in KL with all integral part of gun metal or brass with necessary fittings such as PVC union,PVC coupler including value chamber or GRP cover etc. 32 mm dia

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

od152288/2019_2020 : Providing and Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, PVC pipe of IS 4985(6kg/cm2) including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete 110mm OD

od209750/2019_2020 : Providing and Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, PVC pipe of IS 4985(6kg/cm2) including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete 160mm OD

od209795/2019_2020 : Constructing brick masonry manhole in cement mortar 1:4 (1 cement:4 coarse sand) with RCC top slab with 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement:4 coars sand:8graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4(1 cement:2 coarse sand :4 graded stone aggregate 20mm nominla size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (Heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) With Sewer bricks conforming to I S:4885

od209831/2019_2020 : Providing and fixing square - mouth SW Gully trap class SP-1 complete with CI grating brick masonry chamber with water tight CI cover with frame of 300x300mm size (inside) the weight of cover to be not less than 4.50kg and frame not to be less than 2.70 kg as per standard design 150x 100 mm size P type With Sewer bricks conforming to IS: 4885

od152290/2019_2020 : Providing and fixing Ductile Iron (Hinged Type) cover and frame. 600X600mm size 40kg wt for Overhead Tank

od152292/2019_2020 : 'E. PUMP AND ACCESSORIES Providing, Fixing, testing and commissioning Hydro pneumatic pressure booster system with 2 (1W +1 Assist ) Nos Vertical Multistage Inline pump set with SS impeller, SS Shafts and SS casing. Each pumps should be capable to deliver 3 lps @ 2 bar , with 1.1kW/1.5 HP/3phase motor. Suction and Delivery of each pumps should be connected to a GI manifolds with suitable size, isolation ball valves and NRV in delivery of each pump. A common control panel to operate the pump set as 1 working + 1Assist/ Standby according to the demand , Control panel shall be of variable speed drive( VFD ), HMI, Dry run ,Over load, Phase reversal,error log display, flaulty pump isolation, Protections Etc, Control panel logic should be designed in such a way that all the pumps should be soft start with VFD in cascading manner to increase the life and power savings. The entire system shall be supplied with all the pump sets and control panel assembled in a common GI Skid completely assembled and tested at factory for the duty points along with 100 ltr pressure vessel. Inlet pipe size 65 mm inner dia Outlet header line Size 65mm inner dia '

od209897/2019_2020 : 'Providing, Fixing, testing and commissioning Automatic Tank Filling system with 2 ( 1W+ 1S) Nos Surface Mounting Monoblock pumpset with Ci impeller ,Ci :Motor Casing ,. Each pump capable to deliver 4.2 lps@ 45 mtr head (maxi head range 50 mtr) and with 1.5 kw/ 2 hp / 1ph, . A Wall Mounting control panel for pumps operate the pumpset as 1 working + 1 Standby according to the demand, level controller with Dry Run Protection,Overload protection, float switch/ Sensors for automatic operation ,etc . The entire system to be supplied with all the pump sets and automatic pump controller . Delivery Pipe Size to be provided : 40 MM

LANDSCAPING WORKS

30.2.2 : Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).

30.2.4.1 : Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm

30.2.8 : Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

30.2.9 : Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

30.2.33 : Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler

od152237/2019_2020 : Supplying and planting healthy plants of the following species of appropriate growth including necessary maintenance of the plants (as and when required) at site as directed by Engineer-in-Charge.(Trees to have a height of 120 to 150 cms, shrubs to have a height of 30 to60cms at the time of planting) Trees Ficus Benjamina.

od152239/2019_2020 : Supply and stacking of Saraca indica (Sita Ashok)plant of height 105-120 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

od152241/2019_2020 : Supplying and planting healthy plants of the following species of appropriate growth including necessary maintenance of the plants (as and when required) at site as directed by Engineer-in-Charge. (Trees to have a height of 120 to 150 cms, shrubs to have a height of 30 to at the time of planting)TreesTabernaemontana Divaricata.

od152243/2019_2020 : Supplying and planting healthy plants of the following species of appropriate growth including necessary maintenance of the plants (as and when required) at site as directed by Engineer-in-Charge. (Trees to have a height of 120 to 150 cms, shrubs to have a height of 30 to at the time of planting) Shrubs Duranta Gold.

od152248/2019_2020 : Supplying and Planting grass over the red earth and sand bed closely to get a thick grass lawn suitable for ground in rows of 5cm apart in both direction, keep the area moisture by spraying and sprinkling water till the grass gets sufficient deep roots cutting to level the top surface, trimming and dressing etc. complete as directed by the Engineer-in-Charge. Axonopus compressus

od152250/2019_2020 : Supplying and planting healthy plants of the following species of appropriate growth including necessary maintenance of the plants (as and when required) at site as directed by Engineer-in-Charge.(Trees to have a height of 120 to 150 cms, shrubs to have a height of 30 to60cms at the time of planting) Trees Plumeria Rubra.

od152252/2019_2020 : Supplying river sand brought from outside including transportation, loading, unloading, taxes etc complete as directed by the Engineer-in- charge

od152255/2019_2020 : Supplying and planting healthy plants of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags of appropriate growth including necessary maintenance of the plants (as and when required) at site as directed by Engineer-in-Charge.

OVER HEAD TANK

5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level

5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

od160868/2019_2020 : Providing and Iaying PVC membrane waterproofing system over the vertical side for retaining wall. Installing geotextile of 300gsm as correction layer, over the vertical side of the wall, before installation PVC membrane 2mm thick of approved manufactor shall conform to the physical and chemical properties such as: Elongation at break (300%) UNI EN ISO 527-3 or equivalent, Ultimate Tensile Strength ( > 16.7 N/mm²), Puncture resistance ( > 1100mm) DIN 16726-5.12 or equivalent, Hydrostatic pressure Waterproof UNI EN 1928 resistance (6 hours at 5 bar) or equivalent on vertical side, providing and fixing suitable arrangement for fixing mechanically onto the vertical wall to hold the membrane in vertical position against sagging due to self weight of the membrane and without damaging the PVC membrane and providing and Installing 2mm thick synthetic membrane of plasticized PVC with double seam welding of PVC waterproofing membrane joints and pressure testing of the same to 2 bars up to 10 minutes and with compartmentalization by welding PVC water stop with welding fins at all construction joints and at strategic locations to make a compartment of 200 sqmtrs pre installed with required number of injection flanges in every compartment fitted with inlet / outlet pipe and surface access box. The cost shall include the cost for providing and Installing a minimum protection layer of 300gsm or 25mm thick EPS protection boards over the vertically installed PVC waterproofing membrane, on the vertical face of the retaining wall to act as a protection layer against backfill and all pressure release mechanism etc complete as directed by the Engineer In Charge.

4.12 : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .

od160869/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 65mm

od160870/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 80mm

od160871/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 100mm

19.18.3 : Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg

od186998/2019_2020 : Providing & fixing of propylene Plastic rungs with Cement concrete of 1:2:4 with all necessary arrangements. Including all cost of labour, material, conveyance, loading, unloading, T&P, etc. All complete as per the direction of Engineer-in-charge.

ELECTRICAL LT

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

1.21.4 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm

1.21.5 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.50 mm

od189746/2019_2020 : Supplying and fixing of following sizes of medium class PVC Casing Cap/GI Pipe along with accessories on wall, furnitures or in ground as required. 50mm Casing Cap

od189747/2019_2020 : Supplying and fixing of following sizes of medium class PVC Casing Cap/GI Pipe along with accessories on wall, furnitures or in ground as required. 32mm Casing Cap

od189748/2019_2020 : Supplying and fixing of following sizes of medium class PVC Casing Cap/GI Pipe along with accessories on wall, furnitures or in ground as required. 25mm Casing Cap

1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.55.1 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A

1.55.2 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B

1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.17.30 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm

1.17.33 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 6 sq. mm

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)

1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.27.6 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm)

1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).

1.32 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

od154973/2019_2020 : Supplying of Ceiling Fan 1200mm Sweep complete with 300mm down rod, canopies, shackles and blades and without regulator working on 230/240V Single phase AC,as per latest BEE Standard & IS374:2019

1.44 : Installation, testing and commissioning of ceiling fan, including wiring the down rods of standardlength (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.as required.

1.47 : Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

1.49 : Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.

od222512/2019_2020 : Supplying of Exhaust Fan 450mm working on 230/240V Single phase AC,900 RPM.

1.50.1 : Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep

od154982/2019_2020 : Supply, installation, testing and commissioning of meduim duty Exhaust fan/ Ductable exhaust fanwith necessary bolt and nuts, etc. as required including giving connections with required length of 16/0.20mm pvc insulated and PVC sheathed 3 core round copper conductor flex wire confirming to relevant IS Ductable inline exhaust fan(2-5 NO)

1.56 : Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).

2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

od154987/2019_2020 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

od154988/2019_2020 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door

od231578/2019_2020 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door

od217563/2019_2020 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)8 way (4 + 24), Double door

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.2 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural

2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

od189754/2019_2020 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current breaker with overload (RCBO), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required 16A ,2P, 30mA

od217256/2019_2020 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current breaker with overload (RCBO), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required 25A, 2P, 30mA

od190854/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current breaker with overload (RCBO), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. 25A 4P,30MA

od191452/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current breaker with overload (RCBO), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. 40A 4P,30MA

od221838/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current breaker with overload (RCBO), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. 40A 4P 100MA

2.16 : Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

2.17 : Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32amps 415volts "C" curve TP MCB complete with connections, testing and commissioning etc. as required.

2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

od155001/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. LED Panel light 18 W LED 4000 K, surface mounted, square fitting with control driver etc.

od155002/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. LED Panel light 6 W LED 4000 K, surface mounted, round fitting ultra slim with control driver etc. 6W LED 4000K

od155003/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. LED Panel light 12 W LED 4000 K, surface mounted, round fitting ultra slim with control driver etc.

od155006/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.Surface and wall mounted LED batten extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser & integrated electronic driver with lamp 10 W LED 6500 K

od190891/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. Surface and wall mounted LED batten extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser & integrated electronic driver with lamp 20 W LED 6500 K

od155007/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. Aesthetically designed 34W or nearest LED cool day light flat panel for surface mounting which provides soft light and glare free symetrical illumination , 600x600x70mm size, 6500K or nearest

od189755/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.energy saving surface mounted, decorative oval 10W bulk head edge-lit LED luminaire comprising of high brightness LEDs with IP65 protection, LED warm light

15.1 : Supplying,Installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10 Amp, for mounting height up to 2.8 Mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming and site etc. complete as required

od189758/2019_2020 : Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing LED lamps per fitting, complete with all accessories including connections etc. as required.

od155017/2019_2020 : Installation of Gate light, Bollad fittings, Flood light fittings including providing necessary accessories and giving connection using suitable size 3core cable

od155018/2019_2020 : Providing and fixing plain 16/0.20 mm (0.50 sq.mm) 3 Core circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required

1.51 : Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes

1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required.

1.43 : Providing and fixing extra conduit down rod of 20 mm dia, 2X10 cm length wiring with 2 X1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

od155019/2019_2020 : Supply and clamping the following size of corrugated pvc flexible conduit with necessary compression gland with locking ring and checknut at termination pointed using suitable size GI/MS saddle spacing not exceeding 60 cm on surface including making good the damages, color wasing etc as required. 20mm dia

od155020/2019_2020 : Supply and clamping the following size of corrugated pvc flexible conduit with necessary compression gland with locking ring and checknut at termination pointed using suitable size GI/MS saddle spacing not exceeding 60 cm on surface including making good the damages, color wasing etc as required. 25mm dia

od155021/2019_2020 : Supply and installation of suitable size stainless steel Rod type fan clamp as per IS 732

od220274/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 3.5 x185mm2 AYFY AL Cable

od190168/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx4Cx4Sqmm AL XLPE Cable

od190169/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx4Cx6Sqmm AL XLPE Cable

od190170/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx4Cx10Sqmm AL XLPE Cable

od190171/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx4Cx25Sqmm AL XLPE Cable

od190172/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx3.5Cx50Sqmm AL XLPE Cable

od190173/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx3.5Cx70Sqmm AL XLPE Cable

od189764/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx4Cx16Sqmm AL XLPE Cable

od189765/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx3.5Cx35Sqmm AL XLPE Cable

od221505/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx2Cx4Sqmm AL XLPE Cable

od221506/2019_2020 : Supply of PVC insulated and PVC sheathed/XLPE power cable of 1.1Kv grade of following size as required 1Rx2Cx6Sqmm AL XLPE Cable

7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm

7.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm

7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm

7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

7.5.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 35 sq. mm and upto 95 sq. mm

7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm

7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)

9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)

9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

od155031/2019_2020 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1Kv grade as required. 4C x 6Sq. mm-

od155032/2019_2020 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1Kv grade as required. 4C x 4Sq. mm-

od155033/2019_2020 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1Kv grade as required. 2C x 4Sq. mm-

od155034/2019_2020 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness

od155035/2019_2020 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

od155036/2019_2020 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvaisation thckness not less than 50 microns) with perforation not more than 17.5%, in convenient sections,joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 450 mm width X 50 mm depth X 2.0 mm thickness

od155037/2019_2020 : Providing, Fixing, Laying, Testing and Commissioning of the following 1.1KV Grade PVC Insulated Armoured Copper Control Cables (YWY/YFY) through excavated trenches, built up cable trenches, cable trays, hume pipes as necessary and including supply of all materials for clamping, cable route markers, identification tags and clamping at intervals. 10C X 2.5 sq mm cu cable

od155038/2019_2020 : Providing, Fixing, Laying, Testing and Commissioning of the following 1.1KV Grade PVC Insulated Armoured Copper Control Cables (YWY/YFY) through excavated trenches, built up cable trenches, cable trays, hume pipes as necessary and including supply of all materials for clamping, cable route markers, identification tags and clamping at intervals. 4C X 2.5 sq mm Cu cable

od155039/2019_2020 : Providing, Fixing, Laying, Testing and Commissioning of the following 1.1KV Grade PVC Insulated Armoured Copper Control Cables (YWY/YFY) through excavated trenches, built up cable trenches, cable trays, hume pipes as necessary and including supply of all materials for clamping, cable route markers, identification tags and clamping at intervals. 3C X 2.5 sq mm Cu cable

od155040/2019_2020 : Providing, Fixing, Laying, Testing and Commissioning of the following 1.1KV Grade PVC Insulated Armoured Copper Control Cables (YWY/YFY) through excavated trenches, built up cable trenches, cable trays, hume pipes as necessary and including supply of all materials for clamping, cable route markers, identification tags and clamping at intervals. 2C X 2.5 sq mm Cu cable

od155041/2019_2020 : Providing and Fixing of all materials and termination of the following 1.1 KV Grade PVC Insulated Armoured Copper Control Cables (AYWY / AYFY) using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland and armour earthing using copper conductor of adequate size etc. 10C X 2.5 sq mm cu cable

od155042/2019_2020 : Providing and Fixing of all materials and termination of the following 1.1 KV Grade PVC Insulated Armoured Copper Control Cables (AYWY / AYFY) using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland and armour earthing using copper conductor of adequate size etc. 4C X 2.5 sq mm Cu cable

od155043/2019_2020 : Providing and Fixing of all materials and termination of the following 1.1 KV Grade PVC Insulated Armoured Copper Control Cables (AYWY / AYFY) using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland and armour earthing using copper conductor of adequate size etc. 3C X 2.5 sq mm Cu cable

od155044/2019_2020 : Providing and Fixing of all materials and termination of the following 1.1 KV Grade PVC Insulated Armoured Copper Control Cables (AYWY / AYFY) using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland and armour earthing using copper conductor of adequate size etc. 2C X 2.5 sq mm Cu cable

od191336/2019_2020 : Automatic Power Factor Correction (APFC) Panel Supply, Installation, Testing & Commissioning of Automatic Power Factor Correction (APFC) Panel, cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42 form 4b, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. Incomer 100A ,4P,TM,25KA,MCCB- 1 No Instruments(incomer) 2A, C curve SP MCB - 3 nos. RYB indication lamp, LED type - 3 nos. Digital Multi function meter with Acc Cl1 with RS485 communication -1no. 100/5A 15VA class 1 resin cast CT - 3nos 100A TPN busbar chamber with Aluminium busbar. Microprocessor based intelligent, 8 step APFC relay with PF display - 1 No. Out Going 20A, 18kA, TPN MCCB with adjustable thermal magnetic release with OL & SC protection. 6nos. 40A, 18kA, TPN MCCB with adjustable thermal magnetic release with OL & SC protection. 2no. 10 kVAr capacitor and 7% detuned reactor with capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)- 2 No. 5 kVAr capacitor and 7% detuned reactor with capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)-3No. 5 kVAr capacitor with capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) with fixed type- 1No. 20A,4P CONTACTOR WITH CAP DUTY TYPE-6 32A,4P CONTACTOR WITH CAP DUTY TYPE-2

od191337/2019_2020 : Supply, Installation, Testing & Commissioning of WTP PANEL , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.Incomer25A ,4P,TM,10KA,MCCB- 1 NoBUSBARS40A TPN busbar chamber with Aluminium busbarINSTRUMENTS2A MCB - 3 nosRYB indication lamp, LED type - 1 setOUTGOING6A TPN,C MCB with DOL Starters for 1HP motors and on/off indication lamps with change over switches -4No6A TPN,C MCB -2Nos.

od191338/2019_2020 : Supply, Installation, Testing & Commissioning of INVERTER PANEL, cubicle type, made out of 1.6mmthick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor,compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , includinginternal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tankprocess etc., including following components as per drawing and technicalspecifications.Incomer-32A ,4P,TM,16KA,MCCB- 1 No.BUSBARS- 63A TPN busbar chamber with Aluminium busbar.INSTRUMENTS-2A MCB-3nos.RYB indication lamp, LED type - 1set.OUTGOING-16A DP MCB 10KA-6Nos

od191339/2019_2020 : Supply, Installation, Testing & Commissioning ofLift PANEL , cubicle type, made out of 1.6mm thickCRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor,compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , includinginternal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tankprocess etc., including following components as per drawing and technicalspecifications.Incomer-63A TPN Isolator -1No, Busbar-1 Set TPN AL bus barssuitably rated for 63A-Outgoing:- 40A 4P RCBO 100mA -1No.25A DP RCBO 30mA-1No with4nos of 6A SP MCB.

od191340/2019_2020 : Supply, Installation, Testing & Commissioning of Pump PANEL , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor,compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , includinginternal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tankprocess etc., including following components as per drawing and technicalspecifications.Incomer -63A ,4P,TM,16 KA,MCCB- 1 No .BUSBARS -63A TPN busbarchamber with Aluminium busbar -INSTRUMENTS-2A MCB - 3no's RYB indication lamp, LED type - 1set.OUTGOING-25A 4P MCB with DOL Starters for 3HP motors and on/off indication lamps withchange over switches -1No.10A DP MCB with DOL Starters for 1.5HP motors and on/off indicationlamps with change over switches -1No.16A 4P MCB -2Nos

od191341/2019_2020 : Supply, Installation, Testing & Commissioning of EQUIPMENT PANEL-2 , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. The panel shall be with Top/bottom entry to receive incoming & outgoing cable Incomer 100A TPN 25KA MCCB- 1 No Instruments(incomer) 2A MCB - 3 nos RYB indication lamp, LED type - 1 set Busbar 100A TPN busbar chamber with Aluminium busbar Outgoings 63A TPN 25KA MCCB-4Nos 32A TPN MCB-1No 25A TPN MCB-3No

od191342/2019_2020 : UPS PANEL Supply, Installation, Testing & Commissioning of UPS PANEL , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. The panel shall be with Top/bottom entry to receive incoming & outgoing cable Incomer 63A ,4P,TM,16KA,MCCB- 1 No Instruments(incomer) 2A MCB - 3 nos RYB indication lamp, LED type - 1 set Busbar 63A TPN busbar chamber with Aluminium busbar Outgoings 25A SPN 10KA MCB - C curve-1Nos 25A TPN 10KA MCB - C curve-5Nos

od191343/2019_2020 : Supply, Installation, Testing & Commissioning of OFFICE POWER panel 1 , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.The panel shall be with Top/bottom entry to receive incoming & outgoing cableIncomer 100A TPN 25KA, MCCB- 1 NoInstruments(incomer)2A MCB - 3 nosRYB indication lamp, LED type - 1 setBusbar100A TPN busbar chamber with Aluminium busbarOutgoings40A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 4Nos25A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 3Nos

od191344/2019_2020 : AC ODU Panel 1 Supply, Installation, Testing & Commissioning of OFFICE POWER panel 2 , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. The panel shall be with Top/bottom entry to receive incoming & outgoing cable Incomer 100A TPN 25KA MCCB- 1 No Instruments(incomer) 2A MCB - 3 nos RYB indication lamp, LED type - 1 set Busbar 100A TPN busbar chamber with Aluminium busbar Outgoings 63A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 1Nos 40A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 5Nos

od191345/2019_2020 : AC ODU PANEL2 Supply, Installation, Testing & Commissioning of OFFICE POWER panel 2 , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. The panel shall be with Top/bottom entry to receive incoming & outgoing cable Incomer 100A TPN 25KA MCCB- 1 No Instruments(incomer) 2A MCB - 3 nos RYB indication lamp, LED type - 1 set Busbar 100A TPN busbar chamber with Aluminium busbar Outgoings 40A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 6Nos

od191346/2019_2020 : Supply, Installation, Testing & Commissioning of OFFICE LIGHT panel , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. The panel shall be with Top/bottom entry to receive incoming & outgoing cable Incomer 40A TPN 25KA MCCB- 1 No Instruments(incomer) 2A MCB - 3 nos RYB indication lamp, LED type - 1 set Busbar 63A TPN busbar chamber with Aluminium busbar Outgoings 25A sPN 10KA MCB. - 8No's

od191347/2019_2020 : MSB-2 Supply, Installation, Testing & Commissioning of Main Switch Board (MSB) , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.The panel shall be with Top/bottom entry to receive incoming & outgoing cable EB SIDE Incomer 250A, FP 36KA microprocessor type MCCB Having islation duty with 3O/C+1E/F Release SET AT 215A - 1 No 250A 36KA 4P Contactor - 1No Instruments(incomer) 2A MCB - 6 Nos. RYB indication lamp, LED type - 2set 300/5A 15VA class 1 resin cast CT -1set Digital Multi function meter with Acc Cl1 with RS485 communication -1no. 51G earth fault relay-1 Surge Protection Device-1No Class B/Class 1 as per IEC 61643(IP 20) DG SIDE Incomer 250A 4P,36KA MCCB - 1 No 250A 36KA 4P Contactor-1No. Instruments(incomer) 2A MCB - 6 Nos. RYB indication lamp, LED type - 2set 300/5A 15VA class 1 resin cast CT -1set Digital Multi function meter with Acc Cl1 with RS485 communication -1no. AMF relay - 1No. Busbar 250A ,36kA TPN busbar chamber with Aluminium busbar Outgoings 200A,4P,25KA MCCB ISOLATOR-1NOS 100A,TPN, 36kA, MCCB adjustable thermal magnetic release with OL & SC protection, with RS 485 communication facility - 7Nos 63A,TPN, 36kA, MCCB adjustable thermal magnetic release with OL & SC protection, with RS 485 communication facility - 1Nos

od155058/2019_2020 : Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc. 10 SWG Copper wire.

od155060/2019_2020 : Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc. 6 SWG Copper wire.

od155061/2019_2020 : Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc. 25x3 earth bunch

od155062/2019_2020 : Supply and providing copper sockets for the below mentioned copper earth leads etc complete 6 SWG Copper wire.

od155064/2019_2020 : Supply and providing copper sockets for the below mentioned copper earth leads etc complete 10 SWG Copper wire.

od155066/2019_2020 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 25 x 6 mm brass bolt & nut

od155067/2019_2020 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 12 x 3 mm brass bolt & nut

od191469/2019_2020 : Supply installation testing and commissioning of Hi wall mounted inverted type 3 star split Air Conditioner with Energy efficient Compressor and wireless Remote control,Clamps for fixing condenser on wall ,copper pipping upto 5 metre in between evaporator and condensor units. etc complete Remote control unit to be fixed on wall. 2.0TR with 5 KVA Voltage Stabilizer having intellegent time delay,use only copper pipes in bewteen condenser unit and room unit etc complete ( 2 no. for ASAP OFFICE, 4 Nos. for IT Room, 1Nos for server room)

od155069/2019_2020 : Supplying and fixing Extra length for copper refrigerant piping for the above installation IF exceeds 5 METRE PER UNIT

od155070/2019_2020 : Supplying and fixing Extra length for Water drain piping for the above installation IF exceeds 5 METRE PER UNIT

od155071/2019_2020 : Supplying and fixing of Cyclic digital timer working on 230v 50HZ AC for operating the airconditioners alternatevly in at an interval of 3 hours in the server room

od191470/2019_2020 : Supply,Installation ,testing,commissioning of 3 phase 20kVA Online UPS with Battery(12V, 150AH) for 30m backup and all other accessories and all connections etc complete.

od191471/2019_2020 : Supply,Installation ,testing,commissioning of 3 phase 3kVA Inverter with Battery(12V, 150AH) and all other accessories and all connections etc complete.

od155074/2019_2020 : Providing and Fixing of Electrical ISI Grade Rubber Mat suitable for 440Volts Switchboards. (6' x 3' x 1/4').

od155075/2019_2020 : Providing and Fixing of Electrical ISI Grade Rubber Mat suitable for 11000Volts Switchboards. (6' x 3' x 1/2').

od155076/2019_2020 : Provide and Fixing of Electrical Grade rubber hand gloves suitable for operation of 11KV Switchgear.

od155077/2019_2020 : Provide and Fixing of 2 Nos fire buckets filled with sand along with stand painted with enamel paint of red colour.

od155078/2019_2020 : Provide and Fixing of L.T./H.T danger sign boards.

od155079/2019_2020 : Providing andFixing of emergency OFF trip push button with front Glass and painted in RED Colour.

od191472/2019_2020 : Supply and fixing of Exit singnage boards

od191473/2019_2020 : Supplying and fixing of Shock treatment chart with glass and teakwood frame on wall as approved by the directorate of electricity in Local/Hindi & English languages.

od163228/2019_2020 : COMMUNICATION Supply , installation, testing and commisioning of 42 U 19' Network Rack with all round accessibility maded out of heavy duty 700 MMD and depth between 1000 mm and 1200 mm , provided with 4 Nos Cable manager, with power strips of 10 A sockets 10 nos, KeyboardTray, 90CFM cooling fan, hardware kit and all accessories

od163174/2019_2020 : 'Supply and fixing RJ45 Keystone IO jack with cover and face plate, including crimbing/Punching of UTP 4 Pair CAT 6E LAN Cables on both ends with RJ45 Connector. '

1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

od163175/2019_2020 : Supplying and drawing of 6core single mode outdoor armoured OFC 9/125um in the existing surface/ recessed steel / PVC conduit as required.

od163177/2019_2020 : Supply, installation, testing and commissioning of 24 Port Network Switch Manageable PoE[L2].2 x1G combo ports ,2 nos. of fibre port loaded with single mode transciever, should support static routing

od238165/2019_2020 : Supply, installation, testing and commissioning of 24 Port Network Switch Manageable PoE[L2].2 x1G combo ports

od163178/2019_2020 : Supply, installation, testing and commissioning of 24 Port L3 Manageable Network Switch , 4 nos. of fibre port loaded with single mode transciever, should support static routing

od163179/2019_2020 : Supply and installation of 1 U Cat6E 24 Port Modular Loaded patch Panel

od163180/2019_2020 : Supply and installation of CAT6E 2 mtr long Patch cord factory crimped on both sides

od163181/2019_2020 : Supply and installation of CAT6E 1mtr long Patch cord factory crimped on both sides

od163182/2019_2020 : Supply , installation, testing and commisioning of 9U 19' Network Rack to mount on wall , provided with 4 Nos Cable manager, with power strips of 10 A sockets 6 Nos, , cooling fan and all accessories

od163183/2019_2020 : Supply , installation, testing and commisioning of 15U 19' Network Rack to mount on wall , provided with 4 Nos Cable manager, with power strips of 10 A sockets 6 Nos, , cooling fan and all accessories

od163232/2019_2020 : Supply, fixing, testing and commissioning of the WIFI, Access point with 450Mbps on 2.4GHz bandwidth & 867Mbps on 5GHz bandwidth,total of 1317Mbps speed compatable with 802.3af and passive PoE. Centralized Software Controller Monitor and manage hundreds of EAPs in a single or multiple sites.Free cloud access to manage from anywhere, anytime.Configure and automatically synchronize unified wireless settings to all EAPs in the network.Secure Guest Network with Facebook Wi-Fi and SMS Authentication

od163238/2019_2020 : TELEPHONE Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit 10pair

1.18.2 : Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair

1.19 : Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required.

1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet

1.24.7 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet

od163234/2019_2020 : Supply, fixing, testing and commissioning of the INTERCOM with Digital EPBX with 32 lines 4 trunk

od163235/2019_2020 : 'Supply and fixing 10 pair 0.51 mm dia telephone tag block ''Krone or equivalent make'' '

od163236/2019_2020 : Supply, installation, testing and commissioning of 20 pair Telephone Connection Box

od163237/2019_2020 : Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit 20pair

od163245/2019_2020 : Access Control System 'Supply 'Time and Attendance Software' English Language or latest version with all drives included connecting to existing PC, TCP/IP network feature, Antipass back feature, software for Access control system, Time attendance module, power supply unit with SMF batteries etc. complete as per specifications and as required. The system shall be capable of managing upto 1,000 card holders database and one lakh transactions. '

od163239/2019_2020 : 'Supply & Installation of Emergency exit push button including break glass enclosure including supply and fixing of suitable size GI wall box 16 SWG complete as required. '

od163240/2019_2020 : Supply of Exit push button including supply and fixing of suitable size GI wall box 16 SWG complete as required.

od163241/2019_2020 : 'Supply & Installation of dual Electromagnetic lock complete as required. '

od163242/2019_2020 : 'Supply & Installation of single Electromagnetic lock along with magnetic contact complete as required. '

od163243/2019_2020 : 'Supply & Installation of Proximity Cards Isoprox with sticky ID card, one side 4 colour printing etc. complete as required. '

od163244/2019_2020 : Supply, Installation, Testing & Commissioning of Fingerprint and Card based Time-Attendance Terminal Cosec Door FOT . Optical Fingerprint and Proximity Card based Time-Attendance Terminal (Card Module is not Included) . Support EM Prox and HID Prox Card Module . Dot-Matrix LCD and Touch sense Keypad . Ethernet and USB Connectivity . Time-Attendance and Cafeteria Application . 50,000 Events and 9,600 Fingerprint Templates . 4 LEDs and Buzzer . 12VDC Power Supply through Adaptor or Battery Backup'

od163252/2019_2020 : PUBLIC ADDRESS SYSTEM (COMMON) Supply, fixing, testing and commissioning of the PUBLIC ADRESS SYSTEM COMMON with following specifications Ceiling mounted 6W speakers of size 6' with metallic grill.

od163249/2019_2020 : Supply, fixing, testing and commissioning of hand held microphone with cord wire

od163250/2019_2020 : Supply, fixing, testing and commissioning of 4 zone mixer amplifier 200+200 w, with built in media player having LCD display, 6 mic and 2 aux inputs.

od163251/2019_2020 : Supply, fixing, testing and commissioning of 12W box type speakers mounted on the wall

1.17.2 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

od192672/2019_2020 : CCTV 'Supply, Installation, Testing & Commissioning of 2MP IP Indoor 1080P Dome Camera, PoE H.265+,Fixed 3.6mm Lens for 83° angle of view, 98ft Night Vision, DWDR, Built in Web Server allows remote viewing over network via smartphone, tablet, or PC/MAC, ONVIF Compatible'

od192673/2019_2020 : 'Supply, Installation, Testing & Commissioning of 4MP IP Indoor 1080P Dome Camera, PoE H.265+,Fixed 3.6mm Lens for 83° angle of view, 98ft Night Vision, DWDR, Built in Web Server allows remote viewing over network via smartphone, tablet, or PC/MAC, ONVIF Compatible'

od192674/2019_2020 : Supply, Installation, Testing & Commissioning of 32 channel NVR with, H.265+ dual codec decoding, Up to 8Mp resolution preview and playback, Max 200Mbps incoming bandwidth, Support 4 SATA HDDs up to 24TB, 2 USB(1 USB3.0), 2 RJ 45 Port, HDMI / VGA simultaneous video output, Support Multi-brand network cameras, ONVIF Version 2.4 conformance, Recording, PTZ, Tour, Alarm out, Video Push, Email, FTP, Snapshot, Buzzer & Screen tips and with 4 Nos 6TB Internal Hard drive.

od192684/2019_2020 : PROJECTOR Supply, fixing, testing and commissioning of the Short though intractive projector,having Brigtness : white 3400 ANSI, Colour :3400 ANSI Lumens, Contast ratio : 16000:1 with WXGA Resolution.The shall have Inbuilt 16W speaker. Max intractivity size : 116' with in 4 feet through writing cum projection board : 90' interactivity , multi touch, surface material : 4mm thik acrylic resin coted steel sheet, gloss @ 60 degree-17 , core material 8mm thik particle bord, adhesive : rubber based adhesive backing material : 02mm thick galvinized steel aluminium powder coated frame . Installtion kit including wall mount 4 feet, 10 mtr power cable , 10 mt vga cable , 10 mtr HDMI cable.

od192685/2019_2020 : Supply, fixing, testing and commissioning of the HDMI Cable At confrance hall having 10mtr in length and capable for 4K

od192686/2019_2020 : Supply, fixing, testing and commissioning of the HDMI Cable of 5mtr length to all monitor points as per the requirement

FIRE FIGHTING

od154895/2019_2020 : Supply, installation, testing and commissioning of Monobloc type terrace pump of capacity 450LPM 35M Head with Cast Iron body and SS Impellers, pump close coupled to a squirrel cage induction motor, totally enclosed fan cooled type developing, 415 V 50 Hz, 2900 RPM suitable for foot mounted type including foundation bolts etc complete. '

od214775/2019_2020 : JOCKEY PUMP Supplying, installation, testing and commissioning of Horizontal mounted end suction Electrically driven Mono Block Jockey Pump of capacity 180 LPM at 70 MWC, with all the necessary accessories operating on 3 Ph. 50 Hz. 415 V AC supply including foundation, bolts etc. complete. Duty condition: 180 LPM @70M HEAD

od214776/2019_2020 : DIESEL PUMP Supplying, installation, testing and commissioning of Horizontal mounted end suction Diesel Pump suitable for automatic operation rated for 2280 LPM @ 50 MWC high efficency volute type with cast iron casing, cast iron impeller pump coupled to a squirrel cage induction motor screen protected drip proof. The operating voltage is 415v 3 phase 50 Hz. The pumpset is of foot mounted type including all accessories such as standard coupling, coupling guard, common baseframe, foundation bolts,etc. complete. Duty condition : 2280 LPM @70m head

od214777/2019_2020 : MAIN PUMP Supplying, installation, testing and commissioning of30 HP Horizontal mounted end suction Electric Motor Driven Main Pump suitable for automatic operation rated for 2280 LPM @ 50 MWC high efficency volute type with cast iron casing, cast iron impeller pump coupled to a squirrel cage induction motor, screen protected drip proof. The operating voltage is 415v 3 phase 50 Hz. The pumpset is of foot mounted type including all accessories such as standard coupling, coupling guard, common baseframe, foundation bolts,etc. complete. Duty condition: 2280 LPM @70 M HEAD

od154902/2019_2020 : 'Supply, installation, testing and commissioning of motor starter panel with 200A 4P, isolator ,25kA ISOLATOR as incommer and 2Nos 100A 4P, TM 25kA, isolator, 2Nos 25A 4P, TM 25kA, isolator and 2Nos 40A 4P, TM 25kA, isolator as outgoing for the suitable HP booster pump, 10 sqmm AYFI Cable fully automatic STAR DELTA/DOL starter with over load protection, current sensing type single phase preventor, ON / OFF push buttons and indicating lamps, digital type ammeter & voltmeter, pump running / trip indications etc complete with all accessories and internal wiring with suitable copper wire etc including one set of wired remote push button station in the fire control room at ground level. Panel shall be fabricated out of 16 SWG CRCA Sheet, provisions for cable top/bottom entry, powder coated in fire red shade with weather proof enclosures and made functional. '

od215159/2019_2020 : Supply of 2C X 1.5 sq mm Copper Cable from terrace level starter panel to the remote push button station at ground floor.

od239157/2019_2020 : Supply of 4 C x 25 Sq.MM armoured aluminium cables with ISI mark, including suitable double earthing as per KSEI standards, complete and made functional.

od239158/2019_2020 : Supply of 4 C x 10 Sq.MM armoured aluminium cables with ISI mark, including suitable double earthing as per KSEI standards, complete and made functional.

7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)

od154922/2019_2020 : Supply,erection,laying,testing and commissioning of Galvanised Iron B class (Heavy) ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe size 200 MM to 65 MM dia with all factory fabricated fittings such as GI Hot dip heavy grade bends, flanges, nut & bolts etc. and supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zincchromate industrial primer and two coats of IS approved colour code. For pipes of dia 200 mm and above IS:3589, upto 200 mm dia IS: 1239 with ISI mark. 100MM DIA Galvanised Iron B class (Heavy) ERW pipes with ISI Mark complete

od239500/2019_2020 : Supply,erection,laying,testing and commissioning of Galvanised Iron C class (Heavy) ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, Pipes of size 50 MM and below shall be with THREADED piping work with Ductile Iron FM/UL listed fittings. Piping shall have one coat of anticorrossive zincchromate industrial primer and two coats of IS approved colour code. 40mm dia

od239501/2019_2020 : ABOVE GROUND PIPING Supply,erection,laying,testing and commissioning of Galvanised Iron B class (Heavy) ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe size 200 MM to 65 MM dia with all factory fabricated fittings such as GI Hot dip heavy grade bends, flanges, nut & bolts etc. and supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zincchromate industrial primer and two coats of IS approved colour code. For pipes of dia 200 mm and above IS:3589, upto 200 mm dia IS: 1239 with ISI mark. 65 MM Dia

od239502/2019_2020 : ABOVE GROUND PIPING Supply,erection,laying,testing and commissioning of Galvanised Iron B class (Heavy) ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe size 200 MM to 65 MM dia with all factory fabricated fittings such as GI Hot dip heavy grade bends, flanges, nut & bolts etc. and supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zincchromate industrial primer and two coats of IS approved colour code. For pipes of dia 200 mm and above IS:3589, upto 200 mm dia IS: 1239 with ISI mark. 80 MM Dia

od215173/2019_2020 : Supply,erection,laying,testing and commissioning of Galvanised Iron C class (Heavy) ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, Pipes of size 50 MM and below shall be with THREADED piping work with Ductile Iron FM/UL listed fittings. Piping shall have one coat of anticorrossive zincchromate industrial primer and two coats of IS approved colour code. 50MM Dia

od215203/2019_2020 : Supply,erection,laying,testing and commissioning of Galvanised Iron C class (Heavy) ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, Pipes of size 50 MM and below shall be with THREADED piping work with Ductile Iron FM/UL listed fittings. Piping shall have one coat of anticorrossive zincchromate industrial primer and two coats of IS approved colour code. 25MM Dia

od154925/2019_2020 : Supply, fabrication and erection of MS Structural Steel Supports for piping work with ISMC / ISA with required MS Plate of minimum 8 MM TCK in structures/ceiling including necessary anchor fasteners, applying one coat of epoxy primer and epoxy paint etc and made functional.

od154928/2019_2020 : Supply, Installation, Testing and Commissioning of Galvanised Iron C class (HEAVY) ERW pipes with ISI Mark (IS 1239/3589) complete with all accessories such as bend, reducers, tees etc, including excavation in foundation trenches or drains including dressing of sides and ramming of bottom, and getting out extra excavated soil and back filling of trenches with available excavated earth, consolidated layer by ramming and watering etc. Pipes shall be coated with two coats of asphaltic primer and wound with polymeric mix ( 4 MM Tck) of reputed make and supported at standard intervals and at all tee joints, bends/ offsets etc. 100 mm dia Galvanised Iron C class (HEAVY) ERW pipes

od154933/2019_2020 : BUTTERFLY VALVE Supply, Installation, Testing and Commissioning of PN 1.6 (16 Kg/Sq.CM) rated wafer type Butterfly Valves of the following sizes. Valves shall be provided with Black Nitrile rubber integrally moulded onto the body as body seat, Nylon coated SG Iron disc with flow control lever, stainless steel disc & stem, conforming to IS 13095 class 1 with ISI mark. 100 MM Dia

od210585/2019_2020 : BUTTERFLY VALVE Supply, Installation, Testing and Commissioning of PN 1.6 (16 Kg/Sq.CM) rated wafer type Butterfly Valves of the following sizes. Valves shall be provided with Black Nitrile rubber integrally moulded onto the body as body seat, Nylon coated SG Iron disc with flow control lever, stainless steel disc & stem, conforming to IS 13095 class 1 with ISI mark. 80 MM Dia

od154939/2019_2020 : NON-RETURN VALVE Supply, Installation, Testing and Commissioning of PN 1.6 (16 Kg/Sq.CM) rated Double Flanged Non Return Valves, dual plate type with cast iron body, complete with all accessories such as nut and bolts etc, tested to 1.5 times working pressure and made functional. 100 mm dia

od154941/2019_2020 : NON-RETURN VALVE Supply, Installation, Testing and Commissioning of PN 1.6 (16 Kg/Sq.CM) rated Double Flanged Non Return Valves, dual plate type with cast iron body, complete with all accessories such as nut and bolts etc, tested to 1.5 times working pressure and made functional. 80 mm dia

od154944/2019_2020 : HYDRANT VALVE Supply, Installation, Testing and Commissioning of Stainless Steel SINGLE HEADED type 63 MM dia Hydrant Valve, 80 MM Dia flanges drilled conforming to IS: 5290 with ISI mark, oblique type with female instantaneous hose coupling adaptor made as per IS 903 with ISI mark, complete with cast iron wheel valve, blank cap and chain with ISI mark Internal

od215185/2019_2020 : Supply, Installation, Testing and Commissioning of Stainless Steel SINGLE HEADED type 63 MM dia Hydrant Valve, 80 MM Dia flanges drilled conforming to IS: 5290 with ISI mark, oblique type with female instantaneous hose coupling adaptor made as per IS 903 with ISI mark, complete with cast iron wheel valve, blank cap and chain with ISI mark External

od154946/2019_2020 : BRANCH PIPE Supply & Installation of stainless steel short Branch Pipes 63 mm, conforms to IS: 903 with ISI mark complete with 20 mm bore hexagonal based nozzle.

od154948/2019_2020 : FIRE HOSE Supply Installation testing and commissioning of Fire Fighting Delivery Hoses, Reinforced Rubber Lined type, jacket made up of 100% synthetic yarn heat and abrasion resistant, having 35.7 kg/sq. cm burst pressure, 22 kg/Sq.cm proof pressure and 14 kg/sq. cm working pressure, in 15 Mtrs of length, as per IS 636 type A, 63 mm inside diameter, coupled with Stainless Steel hose coupling adaptors of instantaneous pattern, pair of male and female parts as per IS 903, 63 mm dia and made functional. Hose & couplings with ISI marked.

od154950/2019_2020 : SINGLE DOOR HOSE CABINET Supply & Installation of Hose Cabinets to accommodate one piece of hose pipe along with one pair of male and female coupling and one branch pipe. The cabinet is made up 18 SWG CRCA sheet metal, with single door and glass fronted hinged doors and lock, powder coated to PO red colour. Locking arrangements of the cabinets shall be provided in the front side of the box with a glass covering to access easily.

od154953/2019_2020 : HOSE REEL Supply, Installation, Testing and Commissioning of first aid hydraulic Hose Reel meeting British Standard (European standard) BS EN 671-1 and Australian Standard AS 1221EN 671-1 standards, compact type complete with swing type drum, including 25 mm dia PVC rigid braided hose in 30M length, and are designed to provide a flow rate 35 LPM for 1' at 0.2Mpa, factory fitted 25 mm bore shut off nozzle and all other necessary fixing materials fitted in vertical rising mains / walls/ structures with U Bolts or with M 12 anchor bolts. ISI marked hose reels (both drum & Hose) with 36.50 M hose and GM Chrome plated/SS nozzles can also be provided.

od154956/2019_2020 : BALL VALVE Supplying, installing, testing and commissioning of Chromium plated bronze Ball Valves with necessary fittings of screwed end type with ISI mark. 25 mm Dia

od154959/2019_2020 : FIRE BRIGADE INLET Supply, Installation, Testing and Commissioning of Cast Iron body readymade type Fire Brigade Collective Breaching with 4 nos (twin Siamese) built in gun metal 63 mm spring loaded check valves, 150 mm/100mm flanged outlet connection and for connecting to sump and main header complete with all hardware items. One No 25 MM gate valve to be fitted on the top of the inlet valve.

od154960/2019_2020 : AIR RELEASE VALVE Supply, Installation, Testing and Commissioning of Air release valves spring loaded type, tested to a working pressure of 16kg/Sq cm with Gun metal body, having screwed end 25 mm dia.

od215193/2019_2020 : PRESSURE GAUGE Supply & installation of Pressure Gauge with 0-300 psi (0-21Kg/Sq.CM) range white background, black graduation scale with dual reading in Kg/Sq.CM & PSI, 1/4' BSPT bottom entry PHOSPHOROUS BRONZE bourden tube, brass moving parts, polished stainless steel case with positive seal against weather,moisture & dust, hardened glass, glycerine filled type with syphon tube and isolation cock. 100 MM Dia

od154962/2019_2020 : FIRE RATED DOORS Providing and fixing of 1 Hrs Fire Rated Door with PANIC BAR, with cool-rolled steel sheet, viewing glass of 200x300x7.2 MM, fire rating time of 135 Minutes, fire proof lock and 6 piece visible hinges of 180 degree, door closer etc and fully powder coated in standard colour requirements of the Client, etc and made functional.

od154963/2019_2020 : DUCT DOORS Providing and fixing of Sheet metal duct door for the fire ducts, size 1500 x 900 x 150 MM, fabricated from 16 SWG GI CR Sheet & 18 SWG shutter, sheets (TATA make) fully powder coated as per standard colour requirements of the Client with door handle, hinges and locking arrangements.

od213274/2019_2020 : ABC DRY POWDER FIRE EXTINGUISHER providing and fixing Fire Abc Dry Powder Modular Fire Extinguisher 5 Kg Capacity

od213275/2019_2020 : CO2 FIRE EXTINGUISHER Supply and installation of CO2 type Fire Extinguishers of following capacity Conforming to IS: 13849 with initial gas, filled in steel cylinders, safety valve with lock, discharge hose and horn etc and with ISI mark. 4.5 Kg Capacity

od213276/2019_2020 : Supply and installation of Dry chemical powder type ABC Stored Pressure Fire Extinguishers complete with initial charges of Mono Ammonium Phosphate 50% based silicon coated powder, pressure indicating gauge, discharge hose, wall mounting brackets etc. and with ISI mark. 6 Kg Capacity

od213277/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification. Floor display sign board 12' x 4'

od213278/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification. Fire Stair sign board 12' x 4'

od213279/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification. Main Stair sign board 12' x 4'

od213280/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification. Electrical Duct sign board 12' x 4'

od213281/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification. Fire Exit sign board 12' x 4' with arrow markings

od213282/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification Fire Duct sign board 12' x 4'

od213283/2019_2020 : SIGN BOARD Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification. Passenger Lift sign board 12' x 4'

od213284/2019_2020 : METAL SHEET Providing and fixing sheet metal steel with angle iron frame for sealing fire ducts in all floor levels to prevent spreading of smoke/fire to upper floors, using 5MM chequered Sheets in floor levels, to be fixed in fabricated angle supports of 40 MM, cutting and re-fixing the sheets as per standard requirements etc. cement plastering to seal the gap between wall and frame etc. and made functional.

od238250/2019_2020 : 'Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : ' 80mm sizes M.S

od238251/2019_2020 : 'Providing, fixing, testing & commissioning of 15mmdia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler'

od219926/2019_2020 : Supply, installation, testing and commissioning of 1.5 SQ mm 2 CORE ARMOURED CABLE

od219927/2019_2020 : Supply, installation, testing and commissioning of Addressable type Manual Call Point Resetable type via special key (non-breaking glass type)complete with push button, enclosed in box with provision for cable or conduit coupling.

od219928/2019_2020 : Supply, installation, testing and commissioning of sounder beacon at different locations complete for both audio and visual indication with all fixing accessories, etc. under false ceiling, roof, wall, etc, with a time delay of max 30sec, (seperate power from panel)interconnecting lo loop cable complete as required.

od219929/2019_2020 : 'Supply, installation, testing and commissioning of Addressable type Multi Detector complete with all accessories like base. base box, etc. to be installed under false ceiling, roof and concealed space, etc. interconnecting to loop cable complete as required. '

od219930/2019_2020 : Supply, installation, testing and commissioning of UL listed approved 16/32 bit microprocessor based Intelligent Addressable Fire Alarm Control panel with 2 loops with in built printer option, batteries having back up for up to 24 hours with battery charger unit.The panel shall consisting with minimum 160 character LCD display and RS 485 for networking. The panel shall be able to provide two way communication Barnet/ OPC output, if required.

od154980/2019_2020 : STATUTORY APPROVAL Complete services from the contractor for liasoning works such as filing necessary applications, submission of forms for approval to local fire authorities, depositing the fees / other amounts as required for getting the premises / installations, inspected and approved and all other formalities required till approved by Local Fire Authorities. All the expenses incurred in this regard shall be borne by the Contractor. The official payments to be made for any security deposit etc. in this regard which shall be reimbursed on production of original voucher.

DIESEL GENERATOR

od154921/2019_2020 : Supply & installation of exhaust gas piping of suitable diameter as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc

od154926/2019_2020 : Supply & Fabrication with steel sections and erection of MS base frames , MS angle channels , flat etc for supporting exhaust piping, etc. Including welding, bolting, chipping , grouting etc, including applying one antirust coat of approved primer and two finished coats of approved paint , breaking and finishing of walls, floors etc. The scope is inclusive of minor civil work as required, supply & installation of GI hardware materials, consumables, anchor fasteners, tools & tackles and necessary labour with supervision but not limited to, and complete as per approved drawings,

od154931/2019_2020 : Trial run of DG set for 6 hrs. on no-load and variable load condition and to record the parameters as per prescribed format. Cost of consumable ( fuel oil, lube oil, etc.) to be borne by Contractor.

od221364/2019_2020 : Supply, Installation,Testing and commissioning of 160KVA, silent type, water cooled, radiator type, four stroke, electric start D.G Set with acoustic enclosure and standard control panel. The engine shall be capable of taking 10% overload for one hour after 12 hours of continuous operation. The DG shall be suitable for AMF operation. The alternator shall be brushless, self excited, self regulated, SPDP enclosure, class F/H insulation, suitable for continuous operation at 1500 rpm, generating 415 V +/- 5% at 0.8 p.f, 50Hz, 0.85 load factor, 3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722.

od221365/2019_2020 : Supply, Installation,Testing and commissioning DG set control panel with all engine protection equipments, indications etc The DG set shall be suitable for AMF operation including all necessary control cabling From DG set to AMF panel. The DG set control panel shall have 250A, 25kA TPN thermal magnetic type MCCB with OL, SC and EF protection, RYB, on/off indication lamp, voltmeter, ammeter, energymeter, frequency meter etc The Low set earth fault relay shall be provided in control panel with CT of 50/5A 10VA Cl. 5P10 at DG neutral.

od154908/2019_2020 : Design, manufacture, supply, installation, testing and commissioning of Gearless, machine room less Passenger lifts of capacity 13 passengers for (G+3) storeyed Building with the following specifications: Location of Lifts : Inside the building i) Speed : 1.0 MPS ii) Floors : 4 floors (GF+FF+SF+TF) iii)Travel : 11.4 Mtrs (approx.) iv) Stops - 415 V, 3 phase, 50 Hz, 4 wires system ix) Type of doors a) Car : Power operated centre opening horizontal sliding stainless steel scratch proof (Honey Combing finish) b) Landing doors: Stainless Steel with Honey Combing Finish. c) Flooring: PVC Flooring. VVVF drive control for constant load of 884 Kg respectively traveling @ 1 mps with Simplex operation with out attendant, car position indicators, battery operated alarm bell and emergency light, power operated centre opening automatic sliding stainless steel doors for car entrance and hoistway entrance etc. including all steel, civil and electrical materials as specified such as machine beams, buffer support channels, facia plates, landing sills, pit ladder metal screen in elevator pit etc., as per the specification including cost of all civil and electrical works required for installation of elevator in the existing lift well and, scaffolding, cutting holes, grouting and making good to damages in wall, floor, ceiling etc. for fixing accessories, foundation bolts etc., hoistway wiring and other associated Wirings including Fireman's switch complete in all respect as per direction of Engineer-in-charge

od154912/2019_2020 : Supply of all required spares and Annual Comprehensive Maintenance Contract (Annual Maintenance Contract (AMC) for 5(five) years after expiry of the guarantee period) beyond the expiry of the guarantee period including cost, conveyance, loading, unloading, royalties, taxes all materials and cost all labours, sundries, T&P required as per the direction of the Engineer -in -charge.(2 lift)

ELECTRICAL HT

od189909/2019_2020 : Providing and laying 10mm round copper bonded steel conductor having 100 microns or 25x3mm solid tape copper conductor from earth electrode directly in ground as required.

od221362/2019_2020 : Supply, installation, testing and commissioning of indoor type Unitized Substation enclosure consisting of 630A, 350MVA, 11KV Load break SFU with 24V dc Tripping with Accessories and vector Dyn -11, dry type, 160kVA, 11kV/433V 3 Ph, 50 Hz,Transformer with IP23 and G.I enclosure, winding temperature alarm and trip on transformer compartment and LV chamber suitable for termination of cable, complete with all standard fittings and accessories etc including necessary louvers and as per specifications attached in all respects as required. It shall includes all necessary control cabling for alarm, tripping & indication, all internal cabling as required including emergency trip push botton. The rate shall be inclusive of all materials, lead, lift, necessary civil works etc. complete as per single line diagram & technical specification

od217771/2019_2020 : Providing and fixing fully Solid Vertical Air terminals 16mm rod tapered to 10 mm aluminium rod with Interception Tip at the Top, Fang Fix with base and clamp, Joining Clip, Wall Clamp, etc as required and confirming to IS/IEC -62305

od189910/2019_2020 : Providing and fixing of Stainless Steel Test Joint suitable with suitable Outdoor Enclosure: For 8mm dia solid round aluminium conductor & 10mm dia copper coated solid steel round conductor having 100 microns of copper bonding (if pure copper conductor 25x3 mm solid tape also can be used). Conforms to the requirements according to (IS/IEC 62305).

od189911/2019_2020 : Providing Fxing,Layingand clamping at site of copper earthing conductors inclusive providing earthing terminations and bracing of the terminations etc 25x3 earth bunch

od189912/2019_2020 : Providing and fixing of Cross Connector/T Connector/Folding Clamp/Clamping Shoe/ Expansion Piece necessary for fixing solid aluminium conductor

od189913/2019_2020 : Providing & fixing of 50 sq.mm solid aluminium round conductor with necessary holders at required interval as specified below: 8mm solid aluminium round conductor with Terrace Conductor Fibre Reinforce Concrete Holder( every 100 cm)

od189914/2019_2020 : Providing & fixing of 50 sq.mm solid aluminium round conductor with necessary holders at required interval as specified below: 8mm solid aluminium round conductor with Down Conductor Holder made of whether resistant plastic(every 80cm)

od189915/2019_2020 : Providing & fixing of 50 sq.mm solid aluminium round conductor with necessary holders at required interval as specified below: 8mm solid aluminium round conductor with Parapet Holder made of whether resistant plastic (every 40 cm)

od190022/2019_2020 : Providing and fixing of 20mm low carbon steel rods of 3(3x1m)m with 250 microns copper bonding, fault current withstand capability of 30 KA rms value for 1 second and I peak of 76 KA, Earth enhancing mineral compound, Exothermic welded Clamp for clamping as suggested as per NBC 2016, Concrete Earth electrode inspection chamber with heavy duty cover of 320mmx 320mmx 190mm with a weight bearing capacity of 50KN.

od190023/2019_2020 : Supply and Insatllation of Copper Bonded Plate Electrodes 1200x1200x12.5 mm with 250 microns copper bonding connecting Copper Bonded Steel Bus Bar of 450x50x6mm , two meter (2 runs) of 10mm copper bonded Steel tape from steel bar to plate with Earth enhancing mineral compound as required.

od190024/2019_2020 : Installation of Exothermic Weld Joints for 10mm round copper bonded steel conductor having 100 microns or 25x3mm pure solid tape copper conductor as per IS/IEC 62305. Each under ground joints has to be wrapped with petrolatum- coated chemical fibre fabric having 1.1mm thick and width 50mm.

od226050/2019_2020 : DOCUMENTATION AND APPROVAL (CSP & ADMIN BLOCK) 'Charges for Preparation of all drawings submitting and getting approval from Electrical Inspectorate, submitting of Completion certificates and arranging inspection, getting sanction and energisation certificates from Electrical Inspectorate & KSEB, obtaining power allocation & power connection etc. for commissioning of the whole installation in the premises including generator, Lift panel etc. All statutory payments will be reimbursed on production of the original receipts. (for modification works) '

VELLAPALLY BROTHERS

HEATHER CONSTRUCTIONS

Bidder Name

thoppilcontractors(india)pvtltd

VELLAPALLY BROTHERS

HEATHER CONSTRUCTIONS