Building

Name of Work :- Construction of New Modern Hospital building with 100 bedded facilities at Sub District Hospital,Petlad Ta: Petlad in Dist : Anand.

Memorandum showing item of work to be carried out

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Ch-4 Excavation for foundation up to 1.5 mt. depth including sorting out and stacking of useful materials and disposing off

Rupees One hundred Twenty

1 It.code.04001A 6454.00 the excavated stuff upto any lead & lift (A) Loose or soft soil Cmt 122.94

Two Paise Ninety Four Only

Ch-4 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials

Rupees One hundred Thirty

2 It.code.04002A 6198.00 and disposing off theexcavated stuff upto 50 Meter lead.(A) Loose or soft soil Cmt 136.30

Six Paise Thirty Only

Ch-4 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of useful materials

Rupees One hundred Forty

3 It.code.04003A 7123.00 and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil Cmt 149.65

Nine Paise Sixty Five Only

Excavation for foundation for depth from 5.0 m to 6.0 m including sorting out and stacking of useful materials

Ch-4 Rupees One hundred

and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil ,Extra for additional depth more

4 It.code.04003A + 837.00 Cmt 171.83 Seventy One Paise Eighty

04004A Pg.No.60 Three Only

Box cutting the road surface to proper slope and camber for making a base for road work including removing the Rupees One hundred Nine

excavated stuff and depositing on the road side slope as directed upto 50Mt.lead. Paise Forty One Only

Ch-4 Filling available excavated earth (excluding rock)in trenches, plinth,sides of foundations etc. in layers not exceeding

Rupees One hundred Thirty

6 It.code.4006 14124.00 20 cm. in depth consolidation each deposited layer by ramming and watering. Cmt 136.92

Six Paise Ninety Two Only

Providing Filling in Sunk Portion with cinder of best approved quality including watering ,ramming consolidation and

Rupees Three hundred Thirty

7 RA 144.00 dressing etc. complete as directed in toilet and bath sunken area at all floor up to all lead and lif Cu.M 335.91

Five Paise Ninety One Only

Ch-4 Filling in foundation and plinth with murrum or selected soil in layers of 20cm thickness including watering ramming

Rupees Two hundred Ninety

8 It.code. 4008A 4957.00 and consolidating etc. complete Cmt 294.38

Four Paise Thirty Eight Only

Ch-4 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete

Rupees Four hundred Eighty

One Paise Eighty Only

Applying general insecticide pest control treatment to floors, cupboards etc including labour materials etc. complete.

Using Imidacloprid 30.5 SCas Per IS 6313 part II( (0.075% concentration by mass) is recommended 10.5ml chemical Rupees Ninety One Paise

diluted with 5 liters of water application 0.5 litre chemical /Sqm of surface is recommended as per I.S. Sixty Three Only

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 Rupees Three Thousand

11 05003A, 5.3.2 305.00 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plint Cmt 3095.25 Ninety Five Paise Twenty

Provdg. & laying cement concrete 1:2:4 (1cement:2 corse sand :4 hand broken stone aggregate 20 mm nominal size)

Ch.5-It.code. Rupees Three Thousand

and curing complete including cost of form work in (A) Foundation and plinth

12 5010AA 1164.00 Cmt 3757.61 Seven hundred Fifty Seven

(5.3.13)Pg.No.67 Paise Sixty One Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Five Thousand Four

13 RA 2347.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 5408.87 hundred Eight Paise Eighty

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Seven Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (A) Footing Design Mix

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Six Thousand Four

14 RA 489.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 6400.83 hundred Paise Eighty Three

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC Floor Beam Plinth or Tie beam

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced

concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Rupees Seven Thousand Six

15 RA 314.00 beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Cmt 7653.42 hundred Fifty Three Paise

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve Forty Two Only

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete

work in: Up to Plinth Level.(C) Column

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand

16 RA 54.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 7039.64 Thirty Nine Paise Sixty Four

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC Coping (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced

concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Rupees Seven Thousand Six

17 RA 297.00 beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Cmt 7653.42 hundred Fifty Three Paise

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve Forty Two Only

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete

work in: Above Plinth Level.

(A) Column (i) Ground Floor Design Mix

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced

concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Rupees Seven Thousand Six

18 RA 293.00 beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Cmt 7694.53 hundred Ninety Four Paise

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve Fifty Three Only

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete

work in: : Above Plinth Level.

(A) Column (i) FIRST Floor Design Mix

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced

concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Rupees Seven Thousand

19 RA 266.00 beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Cmt 7735.65 Seven hundred Thirty Five

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve Paise Sixty Five Only

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete

work in: : Above Plinth Level.

(A) Column (i) SECOND Floor Design Mix

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced

concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Rupees Seven Thousand

20 RA 102.00 beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Cmt 7776.77 Seven hundred Seventy Six

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve Paise Seventy Seven Only

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete

work in: : Above Plinth Level.

(A) Column (i) Terrace Floor Design Mix

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Eight Thousand

21 RA 37.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 8337.98 Three hundred Thirty Seven

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Paise Ninety Eight Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC Lintel, sill and Mullians Bands i) Ground Floor (Design Mix)

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Eight Thousand

22 RA 39.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 8379.10 Three hundred Seventy Nine

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Paise Ten Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC Lintel, sill and Mullians Bands i) First Floor (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Eight Thousand Four

23 RA 38.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 8420.22 hundred Twenty Paise

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Twenty Two Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC Lintel, sill and Mullians Bands i) Second Floor (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced

Rupees Eight Thousand Four

concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and

24 RA 18.00 Cmt hundred Sixty One Paise

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if

Thirty Four Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC Lintel, sill and Mullians Bands i) Third & Terrace Floor (Design Mix)

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Six Thousand Seven

25 RA 860.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 6752.04 hundred Fifty Two Paise Four

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC Basement & Ground Floor Slab Beam

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Six Thousand Seven

26 RA 505.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 6793.16 hundred Ninety Three Paise

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Sixteen Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC First Floor Slab Beam

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Six Thousand Eight

27 RA 453.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 6834.28 hundred Thirty Four Paise

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Twenty Eight Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC Second Floor Slab Beam

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Six Thousand Eight

28 RA 58.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 6875.39 hundred Seventy Five Paise

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Thirty Nine Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC Terrace Floor Slab Beam

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using Exposed cement

concrete work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand

29 RA 18.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 7255.82 Two hundred Fifty Five Paise

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Eighty Two Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC Weathershed Ground Floor

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using Exposed cement

concrete work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand

30 RA 18.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 7296.94 Two hundred Ninety Six

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Paise Ninety Four Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC Weathershed First Floor

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using Exposed cement

concrete work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand

31 RA 13.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 7338.05 Three hundred Thirty Eight

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Paise Five Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC Weathershed Second Floor

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using Exposed cement

concrete work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand

32 RA 2.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 7379.17 Three hundred Seventy Nine

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Paise Seventeen Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) RCC Weathershed Third & Terrace Floor

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand

33 RA 464.00 Cmt 7724.60 Seven hundred Twenty Four

concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Paise Sixty Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) Base Slab (Design Mix)

Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and

Rupees Four Thousand

34 RA 141.00 reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete. at Cmt 4080.69

Eighty Paise Sixty Nine Only

Grade Slab at Plinth level

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand

35 RA 460.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 7724.60 Seven hundred Twenty Four

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Paise Sixty Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) Ground Floor Slab (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand

36 RA 460.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 7765.72 Seven hundred Sixty Five

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Paise Seventy Two Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) First Floor Slab (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand

37 RA 416.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 7806.84 Eight hundred Six Paise

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Eighty Four Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) Second Floor Slab (Design Mix)

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand

38 RA 63.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 7847.95 Eight hundred Forty Seven

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Paise Ninety Five Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (C) Third & Terrace Slab (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand Six

39 RA 127.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 7616.71 hundred Sixteen Paise

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Seventy One Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in:(E) Stair case (i) Ground Fl.Design Mix

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand Six

40 RA 64.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 7657.83 hundred Fifty Seven Paise

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Eighty Three Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (E) Stair case (i) First Fl. Design Mix

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand Six

41 RA 51.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 7698.95 hundred Ninety Eight Paise

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Ninety Five Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (E) Stair case (i) SECOND Fl. Design Mix

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Six Thousand Eight

42 RA 523.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 6881.87 hundred Eighty One Paise

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Eighty Seven Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (D) RCC Wall up to Ground floor (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Six Thousand Nine

43 RA 46.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 6922.98 hundred Twenty Two Paise

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Ninety Eight Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (D) RCC Wall up to First Floor Slab lvl. (Design Mix)

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Six Thousand Nine

44 RA 46.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 6964.10 hundred Sixty Four Paise Ten

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if Only

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (D) RCC Wall up to Second floor (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including pumping of batching plant from transit mixer

to site of laying, cost of water tight Centering , shuttering by using 18 mm thick water proof ply with Exposed work in

centring, shuttering & Providing formwork of steel cup lock system including centring shuttering strutting and

propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced Rupees Seven Thousand Five

45 RA 46.00 concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and Cmt 7005.22

Paise Twenty Two Only

beams, column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if

required, admixture in recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve

workability as per direction of engineer in charge and approved , rates includes all heights Up to 4.50 mt, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for

reinforced concrete work in: (D) RCC Wall up to Terrace floor (Design Mix)

Providing laying controlled cement concrete M-250 and curing complete excluding the cost of form work and Rupees Four Thousand

46 RA 94.00 reinforcement for reinforced concrete work in (A) for foundation, footing, Bases of columns etc and Mass concrete Cmt 4745.43 Seven hundred Forty Five

Paise Forty Three Only

Providing & laying controlled cement concrete M-250 with curing etc. complete incl. the cost of form work but Rupees Seven Thousand

47 RA 7.00 excluding the cost of reinforcement for R.C.C. work for column up to plinth. Cmt 7838.95 Eight hundred Thirty Eight

Paise Ninety Five Only

Providing & laying controlled cement concrete M-250 with curing etc. complete incl. the cost of form work but

Rupees Five Thousand Eight

excluding the cost of reinforcement for R.C.C. work for Ground beam & Plinth beams etc.

48 RA 35.00 Cmt 5898.96 hundred Ninety Eight Paise

Ninety Six Only

Providing & laying controlled cement concrete M-200 with curing etc. complete including the cost of form work but

Rupees Five Thousand Eight

excluding the cost of reinforcement for R.C.C. work in foundation and plinth for Copping.

49 RA 7.00 Cmt 5898.96 hundred Ninety Eight Paise

Ninety Six Only

Providing & laying controlled cement concrete M-200 with curing etc. complete including the cost of form work but Rupees Seven Thousand

50 RA 12.00 excluding the cost of reinforcement for R.C.C. work at Ground Floor for Column. Cmt 7965.82 Nine hundred Sixty Five Paise

Eighty Two Only

Providing & laying controlled cement concrete M-200 with curing etc. complete including the cost of form work but Rupees Six Thousand Five

51 RA 40.00 excluding the cost of reinforcement for R.C.C. work at Ground Floor for Beam, Lintel, Chajja. Cmt 6596.56 hundred Ninety Six Paise

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and Laying controlled Cement Concrete M-200 and curing etc. Complete including the cost of form work

Rupees Six Thousand Seven

but excluding the cost of reinforcement for R.C.C. work at Ground Floor for Slabs & Shelves etc.

52 RA 34.00 Cmt 6785.92 hundred Eighty Five Paise

Ninety Two Only

Providing and laying Controlled CC road Tri mix M-200 having thickness 100 mm including preparing sub base with

providing and fixing channels of 75 mm as per required level slope and thickness of concrete road leveling of placed

concrete with surface vibrators finishing surface with power floater and trowel light booming on the surface including Rupees Six hundred Nine

providing expansion joint by concrete cutter machine and filling joint by using color 200 as per manufacturers Paise Eighty Two Only

specifications and making construction joint of 5 mm x 50 mm by using concrete cutter machine etc complete as

directed by Engineer in charge.

Avrage 05014C Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position

(5.4.11 complete upto any floor any height

pg-72+ Rupees Seventy Eight Paise

05014C+05016A Thirty Four Only

05014C Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position Rupees Seventy Seven Paise

(5.4.11 ) complete. Twenty Nine Only

06002B Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation Rupees Four Thousand Two

55 6.13 621.00 and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional. Cmt 4214.33 hundred Fourteen Paise

Pg.No.84 Thirty Three Only

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation

Ch-6 06002B Rupees Four Thousand Two

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional. Extra for brick work in superstructure

56 6.13 + 06007A2A 73.00 Cmt 4256.76 hundred Fifty Six Paise

above floor two

Pg.No.84 Seventy Six Only

level Item No. 1(6.12) (B) Conventional

Ch-6 06008A2A Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in

Rupees Six hundred Ninety

57 6.3 92.00 Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and plinth (B) Conventional Smt 694.68

Four Paise Sixty Eight Only

14015BA Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm

Rupees Three hundred Sixty

58 14.71 112.00 nominal size) laid in one layer and finished with a floating coat of neat cement. (B) 50mm thick. Smt 369.13

Nine Paise Thirteen Only

Providing 15 mm thick cement plaster 1:3 (1 cement: 3 sand) in Sunken floor single coat on brick / concrete Floor &

wall for interior plastering & finishing with a floating coat of neat cement slurry with providing and mixing water Rupees Two hundred Ninety

proofing compound in cement mortar & neat cement slurry in proportion recommended by the manufacturer Paise Eighty Eight Only

specification etc complete for all floor.

Providing and laying autoclave aerated concrete blocks as per drawing (Thickness 200 mm) in single or multiple

layers with approved block laying polymer modified adhesive mortar. Crushing strength of aerated concrete block

shall not be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal

conductivity shall not exceed 0.30 w/mk, fire resistant 4 hours, in true line level and plumb and cleaning the surface

Rupees Four Thousand Five

Ch.6-It.code.6014 with necessary tool tackles The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and

60 962.00 Cmt 4598.92 hundred Ninety Eight Paise

Pg.No.88 percent for Grade 2 blocks when tested in accordance with IS : 6641 (Part-2)-1972 etc. including curing, scaffolding,

Ninety Two Only

racking / flush jointing etc complete, as per drawing / specification etc, complete As per drawings and design supplied

by architect and instruction given E.I.C. For all civil, plumbing, electrical & infrastructure works.

a) Ground FLoor

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying autoclave aerated concrete blocks as per drawing (Thickness 200 mm) in single or multiple

layers with approved block laying polymer modified adhesive mortar. Crushing strength of aerated concrete block

shall not be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal

conductivity shall not exceed 0.30 w/mk, fire resistant 4 hours, in true line level and plumb and cleaning the surface

Ch.6-It.code.6014 Rupees Four Thousand Six

with necessary tool tackles The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and

61 +06008E2A 961.00 Cmt 4641.35 hundred Forty One Paise

percent for Grade 2 blocks when tested in accordance with IS : 6641 (Part-2)-1972 etc. including curing, scaffolding,

Pg.No.88 Thirty Five Only

racking / flush jointing etc complete, as per drawing / specification etc, complete As per drawings and design supplied

by architect and instruction given E.I.C. For all civil, plumbing, electrical & infrastructure works.

Providing and laying autoclave aerated concrete blocks as per drawing (Thickness 200 mm) in single or multiple

layers with approved block laying polymer modified adhesive mortar. Crushing strength of aerated concrete block

shall not be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal

conductivity shall not exceed 0.30 w/mk, fire resistant 4 hours, in true line level and plumb and cleaning the surface

Ch.6-It.code.6014 Rupees Four Thousand Six

with necessary tool tackles The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and

62 +06008E2A 872.00 Cmt 4683.78 hundred Eighty Three Paise

percent for Grade 2 blocks when tested in accordance with IS : 6641 (Part-2)-1972 etc. including curing, scaffolding,

Pg.No.88 Seventy Eight Only

racking / flush jointing etc complete, as per drawing / specification etc, complete As per drawings and design supplied

by architect and instruction given E.I.C. For all civil, plumbing, electrical & infrastructure works.

c) Second Floor

Providing and laying autoclave aerated concrete blocks as per drawing (Thickness 200 mm) in single or multiple

layers with approved block laying polymer modified adhesive mortar. Crushing strength of aerated concrete block

shall not be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal

conductivity shall not exceed 0.30 w/mk, fire resistant 4 hours, in true line level and plumb and cleaning the surface

Ch.6-It.code.6014 Rupees Four Thousand

with necessary tool tackles The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and

63 +06008E2A 276.00 Cmt 4726.21 Seven hundred Twenty Six

percent for Grade 2 blocks when tested in accordance with IS : 6641 (Part-2)-1972 etc. including curing, scaffolding,

Pg.No.88 Paise Twenty One Only

racking / flush jointing etc complete, as per drawing / specification etc, complete As per drawings and design supplied

by architect and instruction given E.I.C. For all civil, plumbing, electrical & infrastructure works.

d) Third Floor & Terrace

Providing and laying autoclave aerated concrete blocks as per drawing (Thickness 100 mm ) in single or multiple

layers with approved block laying polymer modified adhesive mortar. Crushing strength of aerated concrete block

shall not be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal

conductivity shall not exceed 0.30 w/mk, fire resistant 4 hours, in true line level and plumb and cleaning the surface

Rupees Four Thousand Five

Ch.6-It.code.6014 with necessary tool tackles The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and

64 82.00 Cmt 4598.92 hundred Ninety Eight Paise

Pg.No.88 percent for Grade 2 blocks when tested in accordance with IS : 6641 (Part-2)-1972 etc. including curing, scaffolding,

Ninety Two Only

racking / flush jointing etc complete, as per drawing / specification etc, complete As per drawings and design supplied

by architect and instruction given E.I.C. For all civil, plumbing, electrical & infrastructure works.

a) Ground Floor

Providing and laying autoclave aerated concrete blocks as per drawing (Thickness 100 mm ) in single or multiple

layers with approved block laying polymer modified adhesive mortar. Crushing strength of aerated concrete block

shall not be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal

conductivity shall not exceed 0.30 w/mk, fire resistant 4 hours, in true line level and plumb and cleaning the surface

Ch.6-It.code.6014 Rupees Four Thousand Six

with necessary tool tackles The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and

65 +06008E2A 95.00 Cmt 4641.35 hundred Forty One Paise

percent for Grade 2 blocks when tested in accordance with IS : 6641 (Part-2)-1972 etc. including curing, scaffolding,

Pg.No.88 Thirty Five Only

racking / flush jointing etc complete, as per drawing / specification etc, complete As per drawings and design supplied

by architect and instruction given E.I.C. For all civil, plumbing, electrical & infrastructure works.

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying autoclave aerated concrete blocks as per drawing (Thickness 100 mm ) in single or multiple

layers with approved block laying polymer modified adhesive mortar. Crushing strength of aerated concrete block

shall not be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal

conductivity shall not exceed 0.30 w/mk, fire resistant 4 hours, in true line level and plumb and cleaning the surface

Ch.6-It.code.6014 Rupees Four Thousand Six

with necessary tool tackles The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and

66 +06008E2A 102.00 Cmt 4683.78 hundred Eighty Three Paise

percent for Grade 2 blocks when tested in accordance with IS : 6641 (Part-2)-1972 etc. including curing, scaffolding,

Pg.No.88 Seventy Eight Only

racking / flush jointing etc complete, as per drawing / specification etc, complete As per drawings and design supplied

by architect and instruction given E.I.C. For all civil, plumbing, electrical & infrastructure works.

c) Second Floor

Providing and laying autoclave aerated concrete blocks as per drawing (Thickness 100 mm ) in single or multiple

layers with approved block laying polymer modified adhesive mortar. Crushing strength of aerated concrete block

shall not be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 KG/CUM, thermal

conductivity shall not exceed 0.30 w/mk, fire resistant 4 hours, in true line level and plumb and cleaning the surface

Ch.6-It.code.6014 Rupees Four Thousand

with necessary tool tackles The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and

67 +06008E2A 8.00 Cmt 4726.21 Seven hundred Twenty Six

percent for Grade 2 blocks when tested in accordance with IS : 6641 (Part-2)-1972 etc. including curing, scaffolding,

Pg.No.88 Paise Twenty One Only

racking / flush jointing etc complete, as per drawing / specification etc, complete As per drawings and design supplied

by architect and instruction given E.I.C. For all civil, plumbing, electrical & infrastructure works.

d) Third & terrace floor

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1- cement :4-sand) (i) Ground Rupees One hundred Eighty

Floor Two Paise Six Only

Ch.17- Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior

It.code.17.60(ii)+17 plastering above floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) (ii)First Rupees Two hundred Nine

.94(i) 17007B Floor Paise Twenty Nine Only

Ch.17- Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior

It.code.17.60(ii)+17 plastering above floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Rupees Two hundred Thirty

.94(i) 17007B (ii) SECOND Floor Six Paise Fifty Two Only

Ch.17- Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior

Rupees Two hundred Sixty

It.code.17.60(ii)+17 plastering above floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

71 963.00 Smt 263.75 Three Paise Seventy Five

.94(i) 17007B (ii) Third & Terrace Floor

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level

and finished even and smooth in (i)Cement mortar 1:3 (1- cement:3-sand) (i) Ground Floor Rupees One hundred

It.code.17.58(1a)+1

72 7534.00 Smt 177.72 Seventy Seven Paise Seventy

Ch.17- Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering above floor two

It.code.17.58(i) level and finished even and smooth in (i)Cement mortar 1:3 (1- cement:3-sand) Rupees One hundred Ninety

17.91+17.93 (i) First Fl. Nine Paise Sixty One Only

Ch.17- Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering above floor two

It.code.17.58(i) level and finished even and smooth in (i)Cement mortar 1:3 (1- cement:3-sand) Rupees Two hundred Twenty

17.91+17.93 (i) Second Floor One Paise Forty Nine Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Ch.17- Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering above floor two

It.code.17.58(i) level and finished even and smooth in (i)Cement mortar 1:3 (1- cement:3-sand) Rupees Two hundred Forty

17.91+17.93 (i) Third & Terrace Floor Three Paise Thirty Eight Only

Ch.17- 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick

Rupees Three hundred Fifty

76 It.code.17.95 5460.00 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. Smt 352.44

Two Paise Forty Four Only

Pg.No.144 complete. GF & FF

Ch.17- 20mm thick sand faced cement plaster on walls above height 10 metres above ground level consisting of 12mm thick

Rupees Three hundred

It.code.17009 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

77 4805.00 Smt 379.67 Seventy Nine Paise Sixty

17.95+ 17.94(2) complete. - SF & Tarrace

Providing throating or plaster drip and moulding to R.C.C. chhajja

It.code.5.4.18 Rupees Forty Three Paise

no.5018 Pg.No.68 Five Only

17015 Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing,

Rupees Twenty Four Paise

79 Ch-17 116.00 watering etc. complete. Rmt 24.28

Twenty Eight Only

Providing & Fixing the Chicken wire mesh Jali 16 x24 or approved size 22 gauge applying between the RCC and

Rupees Three hundred Fifty

79 RA 2054.00 masonry junction in proper line, level and plumb with all material, labour, tools, tackles and equipment including Smt 359.52

Nine Paise Fifty Two Only

fixing the jali with nails, etc complete as directed by the Engineer-in-charge.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface

Ch.18-18031 to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter

Pg.149 18.57 + and sand papered smooth & Applying two coats of Birla or Asian acrylic lappy ( putty) and two coats of primer of Rupees One hundred Twenty

Ch.19-19032 approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the Three Paise Forty Four Only

Pg.No.153 surface free from mortar dropping and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint two coats on wall surface & two coats of primer of

Rupees One hundred Thirty

81 RA 10382.00 approved brand to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and Smt 133.89

Three Paise Eighty Nine Only

remains of loose powdered materials.etc complete

Providing 20 mm thick water proof cement plaster using water proofing powder 1Kg/1bag of cement for all floors on

brick / concrete wall work using water proofing materials in C M 1: 4 ( 1 cement 4 coasrse sand) including finishing

with a flooting coat of neat cement slurry etc complete for all floor. and shall be guaranteed for minimum period of 10 Rupees Two hundred Ninety

years after handing over the completed building by the main contractor to be finished as directed. Stamp paper Two Paise Ninety Only

guarantee 10 years to be furnished before receiving any payment from the client.

Providing and laying 18 mm thick polished granite stone machine cut in single piece (Max. available) in sill and jambs

Rupees Three Thousand Two

of Door, window, Ventilation frame laid over 10 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointed

83 RA 1570.00 Smt 3282.50 hundred Eighty Two Paise

with grey cement slurry with matching pigment incl. rubbing and polishing half rounding edge etc. complete colour

and shed as approved by architect engineer in charge.

Providing and laying 24" x 24" vitrified glossy/ satin/ matte finish 8 mm thick tile flooring over 20 mm (average) base

Rupees One Thousand Three

Ch.14-It.code. of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material

84 3483.00 Smt 1311.18 hundred Eleven Paise

14022A Pg.No.137 including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade

It Code Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1- Rupees One Thousand

85 No.14012aa 3343.00 cement : 6-coarse sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry including rubbing and polishing Smt 1019.39 Nineteen Paise Thirty Nine

Pg.No.135 etc. complete. (B) 25mm thick Only

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1- cement : 3-coarse sand ) finishing with flush pointing in white cement. Rupees Nine hundred Ninety

Seven Paise Sixteen Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and laying coloured glazed tiles of the size 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on Rupees One Thousand Four

87 9780.00 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry. Smt 1488.24 hundred Eighty Eight Paise

Twenty Four Only

Providing and laying Tactile flooring tiles 300mm x 300mm in flooring 12 mm. Thick cement mortar 1:3 (1 cement :

As Per Patdi SDH Rupees One Thousand Sixty

88 305.00 coarse sand) pointing in white ceand jointed with white cement slurry. Smt 1064.54

(Item No.78) Four Paise Fifty Four Only

Providing and laying polished Granite slab flooring over 20 mm (average) base of cement mortar 1:6 (1 cement : 6 Rupees Two Thousand One

89 RA 363.00 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete.18 mm thick Smt 2181.60 hundred Eighty One Paise

Providing and laying polished granite stone slab 18 mm thick in risers of steps, dedo and pllars laid on 10 mm thick Rupees Two Thousand Three

90 RA 475.00 cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with gray cement slurry including half round moulding, Smt 2344.92 hundred Forty Four Paise

rubbing & polishing etc. complete. Ninety Two Only

Providing and fixing Colour Anodized aluminium work for doors, windows, ventilators and partitions (Sliding window

like Two Track, Three Track, Four Track, fix window/ Openable window / Fix-Partition, etc),with extruded built up

standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS :

1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling

up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be Rupees Five hundred Eighty

smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap Two Paise Thirty Eight Only

beading for glazing / paneling, C.P. brass / stainless steel screws, fixture like aldrop, handle, hinges / pivots & window

Bearings & concealed lock etc all complete at all floors/all levels/all heights as per architectural drawings and the

directions of Engineer-in-charge. (Glazing and paneling to be paid under relevant Item)

Providing and fixing 4 mm thick ground glass (Frosted or obscured on one side) & (PIU approved brand list) fix in

aluminium door, window, ventilator shutters and partitions any size, any shape etc. P & F with EPDM/ PVC rubber

Rupees Seven hundred Sixty

92 RA 740.00 gasket etc all complete at all floors/all levels/all heights as per the architectural drawings and the directions of Smt 767.39

Seven Paise Thirty Nine Only

Engineer-in-Charge. Actual laying installed glass shall be measured (Cost of aluminium snap beading shall be paid in

Providing and fixing 4 mm thick Sheet glass selected quality (PIU approved brand list) fix in aluminium door, window,

ventilator shutters and partitions any size, any shape etc. P & F with EPDM/ PVC rubber gasket etc all complete at all Rupees Seven hundred

93 RA 564.00 floors/all levels/all heights as per the architectural drawings and the directions of Engineer-in-Charge. Actual laying Smt 715.71 Fifteen Paise Seventy One

installed glass shall be measured (Cost of aluminium snap beading shall be paid in basic item) Only

Providing and fixing Stainless steel mosqito net jali ,S.S.315 Grade with wire of 0.56 mm (PIU approved brand list) fix

in aluminium door, window, ventilator shutters of any size, any shape with etc all complete at all floors/all levels/all

Rupees One Thousand Fifty

94 RA 135.00 heights as per the architectural drawings and the directions of Engineer-in-Charge. Actual laying installed Jali shall be Smt 1055.23

Five Paise Twenty Three Only

measured. (Cost of aluminium snap beading shall be paid in basic item)

It No 10.1 code No Providing and fixing M.S. grill of required pattern of windows etc. with M.S.. flats at required spacing and frame

10025AA alround square or round headed bolts and nuts or by screws.including applying a priming coat of red lead paint and Rupees One hundred Six

Pg.No.101 two coats of oil painting etc complete (A)Plain grill Paise Twenty Three Only

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a

Rupees Nine Thousand One

11002A 11.4 priming coat of read lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle

96 185.90 qntle 9108.48 hundred Eight Paise Forty

Pg.No.119 cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like .

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Design and Supply and installation of glass façade with fixed glazing made of 12mm thick clear toughen glass with

OZONE SPIDER with OSP‐A22 ‐1 WAY SPIDER FOR CEILING FIXING;316 GRADE; FINISH‐SSS; 94mm ; OSP‐A44 ‐2 WAY

SPIDER FOR WALL FIXING; 316 GRADE; FINISH‐SSS; 200mmx 94mm ;OSP‐A4 ‐ 4 WAY SPIDER WITH FIN; 316 GRADE;

FINISH‐SSS; 94+94mm x 200mm;OSP‐AFB‐36‐FL ‐ARTICULATED FLAT HEAD BOLT FOR 15MM THK OF GLASS;

GRADE; FINISH‐SSS; GLASS HOLE DIA. 38 MM;OSP‐FP‐350 ‐FIN PLATE 350MM X 93MM; GLASS HOLE DIA.‐22MM, SSS

Rupees Three Thousand

As Per Patdi SDH FINISH; OSP‐FP‐400 ‐FIN PLATE 400MM X 93MM; GLASS HOLE DIA.‐22MM, SSS FINISH; OSP‐FP‐450 ‐FIN PLATE

97 308.00 Smt 3878.40 Eight hundred Seventy Eight

(Item No.85) 450MM X 93MM; GLASS HOLE DIA.‐22MM, SSS FINISH; OSP‐SP‐VS‐400 ‐VERTICAL SPLICE PLATE 400MM; GLASS

Paise Forty Only

HOLE DIA. 22MM; SSS FINISH. The contact between glass surface and metal shall be protected by EPDM washers. The

glass hole shall be protected from direct contact with metal by Derlin bush. A spring washer confirming to SS316 act

as a locking mechanism to secude nut in place ensuring full tightness for long period of time. Contractor must

submitted wind load, Structural stability and warranty certificate.

Providing and fixing flush door both sides laminated shutter fabricated from 35 mm thick solid core malemine faced

three layered pre laminated flat pressed wood based exterior grade bonded BWP/BWR synthetic resin having

Rupees Three Thousand Six

stamped IS 12823 grade I type II including three coats of lacquer polishing to exposed wooden surfaces and including

98 RA 76.00 Smt 3617.14 hundred Seventeen Paise

providing and fixing of Floor door stopper & fixing of S.S finish decorative type heavy guage designs fixtures /

fastening etc. complete As per drawings and design supplied by architect and instruction given by authority and E.I.C.

Providing and fixing bright finish brass hydraulic door closer of approved model and make with necessary screws and

Rupees One Thousand Four

As Per Patdi SDH finishing etc. complete.

99 50.00 Each 1422.84 hundred Twenty Two Paise

Eighty Four Only

PProviding and fixing 3 mm thick PVC sheets as signange and display of health signs/information of required size

As Per Patdi SDH having retro reflective letters/design as per requiement, fixing the same through approved adhesive etc. complete Rupees Three hundred Eighty

(Item No.93) work shall e carried out as per instruction of Engineer-in-charge (Approved make PVC foamed sheet only) (45 x 15 Two Paise Seventy Nine Only

Providing and Fixing Best Quality of S.S. Metal Letter on Outerside Wall at Any Height Including Polishing & Anchoring Rupees Nine hundred

As Per Patdi SDH

101 100.00 Labour Etc Complete as Directed by Engineer in charge. Each 929.20 Twenty Nine Paise Twenty

Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

05011BA Rupees Four Thousand One

nominal size) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in (B)

102 5.4.1 302.00 Cmt 4142.24 hundred Forty Two Paise

Slabs, landing, shelves, Balconis , Lintels, Beams, Girders and Cantilever upto floor two level.

Pg.No.67 Twenty Four Only

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to

Rupees Seven hundred

It No. 14035 be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using

103 4012.00 Smt 779.70 Seventy Nine Paise Seventy

Pg.No.138 white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked together through

their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with Rupees Three Thousand Five

104 17.00 bracket plates, guide channels and arragements for inside and outside locking with push-pull operation including the Smt 3554.40 hundred Fifty Four Paise

cost of hood cover and spring etc. complete.(A) Shutters having width below 3.5 M. Forty Only

Providing and fixing stainless steel railing 50mm dia.(16 gauge-Grade 304) TOP RAIL with 1 mtr c/c VERTICAL SUPPORT

37.5mm dia.(16 gauge-Grade 304), 3 NO. 25mm dia.(16 gauge-Grade 304) HORI. MEMBER ., including welding,

grinding, buffing, polishing and making curvature (wherever required) ,for staircase on the side of waist slab with

Rupees Three Thousand

suitable arrangement as per drwaing, (for payment purpose only hand rail Running meter will be consider, and other

105 RA 337.00 RMT 3847.54 Eight hundred Forty Seven

stainless steel members shall are inclusive of fixing accessories such as Baluster, supports, horizontal members, nuts,

Paise Fifty Four Only

bolts, fasteners etc.)Rate includes for all lead & lift. etc, complete as per drawings and design supplied by architect

and instruction given by authority and E.I.C.

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing, fixing and construction of sandwich type platform of 18 mm thick Granite polished stone top, 80 mm wide

edge full moulded Facia Patti with 25mm thick one side polished Kota stone for bottom & vertical supports sandwich

Rupees Eight Thousand Six

type at 1.00 m interval including necessary cement mortar 1:2 Kota shall be fixed in cement joints and pointing as

106 RA 57.00 Smt 8693.12 hundred Ninety Three Paise

specified in Kitchen / Pantry / Counter / Laboratory etc with necessary adhesive, making of edges, polishing curing

daily mopping with water and kerosene etc comp as directed of Engineer-in-charge. (Measured only vision finished

Providing and fixing Flexible Homogeneous Vinyl Flooring of With treatment of Plyurethane Reinforced Surface,

Rupees One Thousand Eight

As Per Patdi SDH Densely Compacted, Anti-Bactaril and fungicidal and Antistatic havng thickness of 2.00mm With weight of 3150 g/m2

107 577.00 Smt. 1893.75 hundred Ninety Three Paise

(Item No.99) with levelling, chemical adhasive for fixing, corner junction.

Seventy Five Only

Wall Painting (two coats) with antibacterial polyrethane epoxy paint approved brand and manufacture on internal

As Per Patdi SDH Rupees Four hundred Fifty

108 439.00 walls to give an even and smooth surface. Thoroughly brushing the surface free from mortar dropings and other forein Smt. 454.50

(Item No.100) Four Paise Fifty Only

matter and sand prepared smooth.

Providing & applying two Componant ,non slumping ,non-sagging, thixotropic epoxy bedding compond & adhesive

compatible with for tiles for coving at radius of 25 mm or as directed by the architect's / Engineer-in-charge make it

As Per Patdi SDH Rupees Five hundred Seventy

109 550.00 fit for tiles inclusive of Labour, material and Equipment etc. for all heights, location, shape & size as directed by the RMT 575.70

(Item No.101) Five Paise Seventy Only

architect/Bank engineer incharge. (Actual Length shall be measured for payment.)

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm

It No. 15001a Rupees Seven hundred Thirty

110 750.00 diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the Smt 734.19

Pg.No.137 Four Paise Nineteen Only

cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

Corner Guard Protection System in entire hospital : Supply and Installation of Corner Guard protection system fixed to

Rupees Seven hundred

As Per Patdi SDH brick wall/or tile/dado at the corner from finished floor level. It should be adjustable end cap. Providing and fixing

111 280.00 RMT 788.81 Eighty Eight Paise Eighty

(Item No.103) brush/mirror finish S.S 304 grade Angle 40.0 x 40.0 x 3.0 mm &. 1.00mt. Ht. x 3.75 kg/mt. = 3.75 kg.

Providing and applying 2mm thick Texture Plaster Terre Palette (Earthen Textures, Spectrum, Coral or equivalent)

As Per Patdi SDH incorporating fine filaments made of polymer and aggregating natural stone powder with making grooves on existing Rupees Three hundred Fifty

(Item No.104) base coat of 18 mm thick smooth mala plaster etc. Complete Colour and shade as approved by Architect/ Engineer in One Paise Forty Eight Only

charge for all floor all height.

19005 +19001 Painting Two coats over & including a priming coat on new steel and other metal surfaces with enamel paint, brushing

19.19+ interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.. Rupees One hundred Five

19.2 Paise Forty Nine Only

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior

Ch.19 Rupees Ninety Two Paise

114 676.00 to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and Smt. 92.20

19002Pg.No.150 Twenty Only

other foreign matter.

Providing & Plantation of semi carpet Lawn (Selection 1) the scope includes prepaid ground for planting of lawn, soil

spreading, mixing of soil & manures, rolling the same etc comp. Labour cost for Lawn Plantation semi carpet Lawn

As Per Patdi SDH Cost including carting, loading & unloading at site etc and includes required dose of pesticides & Ant termite Rupees Two hundred Forty

(Item No.109) treatment Labour charges for maintenance of semi carpet Lawn including tools & tackles. including Providing, mixing Eight Paise Forty Six Only

& spreading fertilizer Manure ,1 year maintenance etc complete as directed by architect /E.I.C

Providing & Plantation of Shrubs (mini 3 feet height) by digging of pit size 1x1x1 feet, adding soil, farm yard manure,

As Per Patdi SDH DAP, Pesticide, Plantation of sapling. Making proper tree basin & putting proper support including Providing, mixing & Rupees One hundred Fifty

(Item No.111) spreading fertilizer Manure ,1 year maintenance etc complete as directed by architect /E.I.C One Paise Fifty Only

Providing & Plantation of Green belt trees by digging of pit size 2x2x2 feet, height 10 feet adding soil, farm yard

As Per Patdi SDH manure , DAP, pesticide, plantation of sapling. Making proper tree basin & putting proper support including back

117 50.00 No. 50.50 Rupees Fifty Paise Fifty Only

(Item No.112) filling the trench, watering etc including Providing, mixing & spreading fertilizer Manure ,1 year maintenance etc

complete as directed by architect /E.I.C

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Bowing and developing flowering plants grown in nusery having approximate height 4 to 5 ft or Height ad per

Rupees One hundred

As Per Patdi SDH Landscaps Plan with natural growith of soil packed in polithyline bag or Earthern pot. Including organic & chemical

118 50.00 No. 171.70 Seventy One Paise Seventy

(Item No.113) fertilizer Pesticides, fungicides, hormones & maintaining the plants up to three months as deserted. Bottol palm.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light

reflection 85% noncombustible as per B.S. 476 part IV, 100% humidity resistanceandalsohaving

thermalconductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall be of

approved texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal gridof hot dipped Rupees One Thousand Six

119 9706.00 galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably Smt 1674.15 hundred Seventy Four Paise

spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm Fifteen Only

centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced

between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm

and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to

form grid of size

Main Door Signage

3Stainless Steel plate of grade 304 having size 500x150x1mm thick (brush finish) shall be used as base / background.

Rupees Fourteen Thousand

As Per Patdi SDH The height of the font shall be 30mm for name pasting and the designation shall have 15mm height pasted below the

120 8.00 Nos. 14942.95 Nine hundred Forty Two

(Item No.121) name of person.

Paise Ninety Five Only

Providing and fixng curtain For Door/Window using Fire retardent Material including necessary hanging attachments

Rupees One Thousand

As Per Patdi SDH like hooks/ rings, 25mm SS rod/ alluminium channel/ Socket on rod ends/ middle supporting sockets including 1 inch

121 410.00 Smt 1717.00 Seven hundred Seventeen

(Item No.123) Adjustable Curtain S.S. Rod up to 12 ft long with best quality Curtain Knobs and bracket or socket (2 nos 1 set) etc.

Supply & Installation of Cubicle/ Privacy Curtains for Hospital Track Material Made of Aluminium alloy (6063-T6), with

corrosion resistanceproperties and Standard white powder coatingTrack Size (Approximate)Gauge 1.7mm Height

25mm Width 20mm Runner type Wheel or Glider Type Runner material Made of Nylon of PVC Hooks Stainless Steel

202 or more Bends Tracks are bendable to a radium of 300 mm at 90 degree to cover the whole bed Track height As

per site requirement Track roof suspenders Made of aluminium pipe of at least 12 mm diameter and the Upper

Circular Plate made of aluminium with at least 50 mm diameter.These should be white powder Coated and fixed with

the ceiling is with anchors, bolts, screws etc.Track wall supports Aluminium white Powder coated Tack bridge clamp

Aluminium white Powder coated Curtain Removal Point Optional : Curtain runner removal point for loading and Rupees One Thousand Six

As Per Patdi SDH

122 400.00 unloading of runners Curtain Material Polyester Blended Standard Curtain Size Height At least 84 inch or more Width RMT 1696.80 hundred Ninety Six Paise

At least 46 inch or more Mesh(Net) Size At least 18 inch or more from top of the curtain and made of nylon Curtains Eighty Only

Type:Stain Retardant Cubicle Curtains These Curtains should be made up of fabrics with inherent antibacterial and

flame retardant properties.These curtains should be wrinkle free and shrink proof with Anti odour and Anti-fungal

properties.It should meet the international Antimicrobial Test JISL 1902/ISO20743These Curtains should have Dire

retardent,stain retardant qualities with water repellent quality with rust proof SS grommets 6" on centers. Designs

and Colours should be approved by the user department.

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work ) after

drilling the hole of required diameter & depth ,cleanning of the same ,providing /filling the hole with Injection Mortar

(HIT HY 150 of Hilti or approved equivalant ),inserting reinforcement bar etc. complete as per Manufacturers & Rupees Three hundred

As Per Patdi SDH

123 50.00 architects instruction.The work shall be carried out by the technical workmens/agency approved by the manufacturer Each 317.14 Seventeen Paise Fourteen

and under technical supervision of Manufacturer of Injection grout including all materials,tool tackles ,labour Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work ) after

drilling the hole of required diameter & depth ,cleanning of the same ,providing /filling the hole with Injection Mortar

Rupees Three hundred

As Per Patdi SDH (HIT HY 150 of Hilti or approved equivalant ),inserting reinforcement bar etc. complete as per Manufacturers &

124 45.00 Each 378.75 Seventy Eight Paise Seventy

(Item No.126) architects instruction.The work shall be carried out by the technical workmens/agency approved by the manufacturer

and under technical supervision of Manufacturer of Injection grout including all materials,tool tackles ,labour

etc.complete.(B) 10mm Dia

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work ) after

drilling the hole of required diameter & depth ,cleanning of the same ,providing /filling the hole with Injection Mortar

As Per Patdi SDH (HIT HY 150 of Hilti or approved equivalant ),inserting reinforcement bar etc. complete as per Manufacturers & Rupees Four hundred Thirty

(Item No.127) architects instruction.The work shall be carried out by the technical workmens/agency approved by the manufacturer Four Paise Thirty Only

and under technical supervision of Manufacturer of Injection grout including all materials,tool tackles ,labour

etc.complete.(C) 12mm Dia

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work ) after

drilling the hole of required diameter & depth ,cleanning of the same ,providing /filling the hole with Injection Mortar

As Per Patdi SDH (HIT HY 150 of Hilti or approved equivalant ),inserting reinforcement bar etc. complete as per Manufacturers & Rupees Five hundred Fifty

(Item No.128) architects instruction.The work shall be carried out by the technical workmens/agency approved by the manufacturer Four Paise Forty Nine Only

and under technical supervision of Manufacturer of Injection grout including all materials,tool tackles ,labour

etc.complete.(D) 16mm Dia

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work ) after

drilling the hole of required diameter & depth ,cleanning of the same ,providing /filling the hole with Injection Mortar

Rupees Seven hundred

As Per Patdi SDH (HIT HY 150 of Hilti or approved equivalant ),inserting reinforcement bar etc. complete as per Manufacturers &

127 20.00 Each 792.85 Ninety Two Paise Eighty Five

(Item No.129) architects instruction.The work shall be carried out by the technical workmens/agency approved by the manufacturer

and under technical supervision of Manufacturer of Injection grout including all materials,tool tackles ,labour

etc.complete.(E ) 20mm Dia

Ch.4/B- Providing and laying and fixing 50 mm thick expansion joint by hydro cell semi rigid UV resistance with high Rupees One Thousand Four

128 It.code.5048 134.00 performance laminated closed cell polythene foam joint filler in sheet foam as directed, etc. complete. Smt 1491.03 hundred Ninety One Paise

Pg.No.78 Three Only

Ch.4/B- Providing and fixing 25 cm Wide & 3mm thick exterior composite panel on existing expansion joint horizontally &

Rupees One Thousand Fifty

129 It.code.5053 500.00 vertically with all material, hardware, acessories & fittings etc completed. Smt 1054.34

Four Paise Thirty Four Only

Ch.20- Providing and fixing 60 mm diameter backup rod having minimum density 22 kg per cum (ASTMD - 3575) &

Rupees Sixty Nine Paise

130 It.code.20044 700.00 compression strength of 0.40 kg per sqm (ASTM - 5249) and finishing with polysulphide sealant etc. complete. For 50 RMT 69.07

Pg.No.156 mm wide expansion joint

Making up the even groove, cleaning by air/water blasting and resealing with DOW CORNING make CCS Silicon type of Rupees Three Thousand Six

As Per Patdi SDH

131 250.00 liquid seals for widths 40mm x 10mm after using appropriate back up material of SUPREME make RMT 3641.05 hundred Forty One Paise Five

Drilling of pilot 250/325 mm dia bore hole in all strata including dual over burdan strata by combination DR / DTH

Rig. including lowering of 200/250 mm dia MS ERW pipes in bore hole with 4 to 6 mm Gravel ,Lowering of the

Rupees Three Thousand

submersible motor of 3HP along with flat PVC cable as suggested by Hydrologist. Geohydrological ground water

132 RA 45.00 RMT 3307.65 Three hundred Seven Paise

investigation charges for Deep tubewell (with vehical charges & with water sample, and finalizing with devlopment of

Sixty Five Only

bore by back washing &,Geohydrological ground water investigation etc complete.

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks Raised Pavement Markers made of polycarbonate and

ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the

light entering the lens face and shall support a load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and

complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The

height, width and length shall not exceed 20 mm, 130 mm and 130 mm and with minimum reflective area of 13 Sqcm Rupees Three hundred

It Code No.26162A

133 240.00 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated No 326.23 Twenty Six Paise Twenty

cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be Three Only

a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and

using epoxy resin based adhesive as per manufacturers recommendation and The color of the marker should be as per

the IRC 35-2015 and as directed by Engineer-in-charge.

Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin surface providing and

laying a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm

area, thickness of 2.5mm is excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be

level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The Rupees Three hundred Sixty

134 130.00 white color marking should provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux and Asphalt Smt 367.72 Seven Paise Seventy Two

road shall be min 100 mcd/m2/lux during the service life during the day time. The marking should meet the Only

performance criteria for night time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of

IRC 35-2015. Warranty for the Retro reflectivity should be two years.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 Rupees Seven hundred Six

including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : Paise Ninety Three Only

SP 63-2018 etc. Complete.

FLUSH PARTITION (laminate finish) :

Providing & fixing flush partition up to false ceiling ht (thickness of partition is 75 mm) having 12 mm thick Marin

plywood IS 710 both side on aluminum framing. Aluminum framing size for vertical & horizontal support is 50 mm x

25 mm. All exposed surfaces finished with 1 mm thick laminate of approved shade without any air gap and grooving as

per design. Necessary framing to be erected above false ceiling. No extra cost to be paid for the same. Before Rupees Four Thousand Five

As Per Patdi SDH installation, make hole/face plate for conduit pipes of electrical / networking cables with open able stud from

135 180.00 Smt 4512.31 hundred Twelve Paise Thirty

(Item No.141) partition Including all materials and labor etc. Make necessary grooves as per shown in drawing. All bottom ends are One Only

covered with Ghana teak bidding Patti finished with laminate Complete with all necessary hardware & adhesives as

per details given in drawing and as per instructions of Architect/consultant/Engineer In charge. Contractor has to

provide all necessary cut outs (race ways.) for Electrical works & no extra payment shall be made for it.

Applying and providing Expansion joint sealing System on 100 mm vide joint including cleaning of exansion joint by

mechanical means provision of adhesive and flexible membrane with required bond length as per menufracturer Rupees Four Thousand

It Code No.5050

136 169.00 specification and 4mm thick alluminium strip covering with one side sloted and bolted with suitable system, inclusive Smt 4772.00 Seven hundred Seventy Two

of all manpower, machinery and material as per specification and as directed. Only

It Code Providing and fixing 35 mm thick shutters for Doors, windows and clear story windows including anodised alluminium Rupees Three Thousand

137 No.10004ca 63.00 butt hinges with necessary screws. (A) Indian Teak Wood(iii) Partly panelled and partly glazed. Smt 3752.41 Seven hundred Fifty Two

Pg.No.97 Paise Forty One Only

Fabricating, Supplay and Fixing in position SS Dasa for staircase with brush finish and SS 304 grade as per Indian

Rupees One Thousand Eight

standrd and detailed drawing including grinding,cleaning and filling the welded spots with SS finish (only Length will

138 RA 350.00 RMT 1876.25 hundred Seventy Six Paise

be paid for payment ). The work to be executed as per Architect drawing and E.I.C. etc. complete for all floors.

Twenty Five Only

Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed with hilti screw and rubber silicon Rupees One Thousand Four

It code No.15019

139 420.00 sealer and alluminium strip of size 50 x 3 mm etc complete as directed by Engineer in charge. Smt 1441.90 hundred Forty One Paise

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and fixing single layer waterproof gypusm board 12.5 mm thick of the make Newgood Group Co. Ltd. or

equivalent & Newgood Group Co. Ltd. company sections using waterproof board of size 1220 mm x 1830 mm x

mm suspended by G.I suapender of size 25 mm x 3 mm with intermediate channel of size 18 mm x 40 mm x 0.80 mm

It Code No.16007 at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm center to center and Rupees Six hundred Six Paise

Pg.No.142 perimetre chanel A of size 20 mm x 27 mm x 30 mm x 0.50 mm at edges & drops including paper tap sand sofit cleat, Ninety Five Only

anchor fastener, scoch bolt connecting cleat joining compound top coat on ceiling including making necessary opening

for light fitting, diffuser etc. complete as per detail drawing as directed.

Providing and applying a seamless lightweight multi- layered system comprising of primer and finish coat 75 mm thick

epoxy coving on the wall to floor joint epoxy 75mm thick Epoxy Coving System which consist of surface preparation,

Rupees Seven hundred

As Per Patdi SDH primer coat. Make coving (VATA) coving with Florscreed C , make finish putty with Florscreed C and silica micro. Then

141 160.00 RMT 786.57 Eighty Six Paise Fifty Seven

(Item No.165) Apply two coat Florthane-PU paint of standard make with approved colour and floor pattern design by architect

applied as a top coat. After 48hour of drying etc. Comp. as per the instructions of I/C.

Writing letter or figures on any surface with black japan paint (stops,comas, hyphens and the like not to be measured

and paid for separately)(i) Block (Letters/Figures) (Per 10 Letter pet CM.HT)

It Code No.19023a Letter Rupees Three Paise Thirty

Pg.No.152 Per Four Only

Writing letter or figures on any surface with black japan paint (stops,comas, hyphens and the like not to be measured

and paid for separately) (ii) Indian (Letters/Figures)

It Code No.19023b Letter Rupees Three Paise Fifty

Pg.No.152 Per Two Only

Extra over above items for using thick white paint instead of black japan paint. (i) Block (Letters/Figures)

It Code No.19024a Letter

144 70.00 0.07 Rupees Paise Seven Only

Supplying and fitting of X-ray protective lead sheet (2 mm or as per site requirement) on existing wooden/matel/flush

As Per Patdi SDH Rupees Six hundred Ninety

145 25.00 door or on new door but including 6 mm ply wood & Hardware accessories (SS D handle 152, SS Aldrop 254 mm long, Kg. 696.90

(Item No.171) Six Paise Ninety Only

Goderej door closer, SS Tower Bolt etc complete

Supplying and fitting of lead glass of approved quality for X-ray protection of 10 mm thick.

As Per Patdi SDH Rupees Eight Thousand One

(Item No.172) hundred Eighty One Only

Providing & Fixing garware make non transparent NR CHARCOAL , 20 suncontrol film 1mm thick with 42% of solar

As Per Patdi SDH Rupees Four hundred Sixty

147 450.00 energy reflectance. To be fixed on window glass panels as per instruction in proper maner without any crach,currling Smt 469.65

(Item No.173) Nine Paise Sixty Five Only

and whole etc. up to the corner and edges of glass panel.

Supplying and fitting of waterproof ISI branded of approved quality Ply wood for all type of work like furniture and

Rupees One Thousand Two

As Per Patdi SDH table top or door surfacing etc complete 12mm

148 144.00 Smt 1237.25 hundred Thirty Seven Paise

Twenty Five Only

Providing and Fixing Special quality Sheet glass one side vision (reflected ) as per desided by engineer incharge of

As Per Patdi SDH Rupees Eight hundred Fifty

149 231.00 approved quality bedded in puty and fixed with wooden beadings including the cost of wooden beadings of first class Smt 858.50

(Item No.175) Eight Paise Fifty Only

teak wood and necessary cutting of Glass (4) 4 mm thick

Applying Melamine polishing of Asian paint or Royal paint in any shade as per instruction of engineer incharge. the

work shall be carried out by specilized agency only as per approved manufacture's specification in two or three coat

As Per Patdi SDH Rupees Four hundred Fifty

150 180.00 up to satisfaction of engineer incharge on previously Polished wood or wood Base Surface to give an even surface Smt 454.50

(Item No.176) Four Paise Fifty Only

including cleaning the surface by sandpaper Smooth and also including coat of wood Filler as directed by Engineer-in-

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

providing and fixing single layer 12.5 mm GYPROC make all four side tepered perforated gypsum acoustical board

having eight quadrents having 12 mm hexagonal shaped perforations and backed acoustical fleece peneling supported

on Gypsteel ULTRA 48 x 34 x 36 x 0.5 mm C stud placed on every 610 mm canter to canter in Gypsteel ULTRA 50 x 32 x

32 x 0.5 mm width floor channel, for horizontal support between the C-stud place Noggin Channel on board joint,

As Per Patdi SDH Rupees One Thousand Eight

151 225.00 then board screw fixed to stud at designed spacing all square and tapered edges of the boards are to be jointed and Smt 1818.00

(Item No.177) hundred Eighteen Only

finished so as to have a flush look which includes filling and finishing with gyproc jointing compound, gyproc joint

paper tape and laying of 50 mm glass wool or synthetic wool with paint and also include 100 mm aluminium skirting

as directed by Engineer-in-charge.

Providing and fixing insulated fire rated GI Sheet doors conforming to FD 120-I 30 classification of IS 3614 :2021 with

fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter

assembly shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door

and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns.

The door should carry a minimum 500 Hrs of salt spray test. All accressesories like hardware, vision panel, fire &

smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every

door must carry a label confirming to type of door & its fire rating.The door must carry a 5years valid test evidence

As Per Patdi SDH Rupees Five Thousand Three

152 90.00 from CBRI-Roorkee / NTH-Kolkata/ NABL accrediated lab which operates in accordance with ISO/IEC 17025.The Door Smt 5302.50

(Item No.178) hundred Two Paise Fifty Only

frame shall be single rebate grooved profile of size minimum 100mm x 57mm made out of 1.20mm (18gauge)

minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembeled with bolting system.

Frames to have inbuilt grooved to accomodate Intumuscent fire seal strip 10X4MM, It shall be fixed in grooves,

specifically cut in rebate on all the 3 sides of the frame . The frame should also be provided with fire rated EPDM

smoke seal 12X12 mm conforming to IS: 3614:2021 or as per test evidence..

. All provisions should be mortised & provided with necessary inbuilt reinforcement to receieve appropriate hardware.

Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long

HDG fasteners, with Polyamide sleeves(Payable in extra item) for installation of frame in finished plastered masonary

wall opening. Note :- For grouting of Steel frames in masonary installations ;cement sand mixture 1:3 ratio by civil

contractor/fire rated PU foam or such fire rated material may be recommended except head member. Door leaf

should be minimum 46mm thick fully flush double skin door. Door leaf must be manufactured from 1.2mm(18gauge)

thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 100 kg/cum. All doors shall

be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks,

and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated

astragals has to be provided on the meeting stile for both active and inactive leaf. The shutters shall be mounted to

the frame with SS 304 grade ball bearing type hinges of size 100x 75x3 mm alongwith all suitable hardware.Vision lite

size 200x300 mm or 150 x 400mm(max area 0.06sqm) wherever applicable should be provided with single layered

clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a

clipon arrangement.The glass will be provided with fire rated ceramic tape of min.2 mm thickness with min.15mm

width alround on either face. Every Glass pane must carry a permanent marking of its glass manufacturer Note:-As per

drawings and design supplied by architect and instruction given by authority and E.I.C.

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and fixing Un-insulated fire rated GI Sheet doors conforming to FD 120 classification of IS 3614 :2021 with

fire rating of 120 minutes integrity. The factory manufactured door frame and shutter assembly shall be made out of

minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door and frame should be finished

with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a

minimum 500 Hrs of salt spray test. All accressesories like hardware, vision panel, fire & smoke seal etc to be supplied

by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label

confirming to type of door & its fire rating. The door must carry a 5years valid test evidence from CBRI-Roorkee / NTH-

Kolkata/ NABL accrediated lab which operates in accordance with ISO/IEC 17025.The Door frame shall be single Rupees Five Thousand Four

As Per Patdi SDH rebate grooved profile of size minimum 100mm x 57mm made out of 1.20mm (18gauge) minimum thick galvanized

153 120.00 Smt 5433.80 hundred Thirty Three Paise

(Item No.179) steel sheet. Frames shall be butt / mitered joint and field assembeled with bolting system. Frames to have inbuilt Eighty Only

grooved to accomodate Intumuscent fire seal strip 10X4MM, It shall be fixed in grooves, specifically cut in rebate on

all the 3 sides of the frame . The frame should also be provided with fire rated EPDM smoke seal 12X12 mm

conforming to IS: 3614:2021 or as per test evidence... All provisions should be mortised & provided with necessary

inbuilt reinforcement to receieve appropriate hardware.Frames should be provided with back plate bracket for anchor

fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves(Payable in extra item) for

installation of frame in finished plastered masonary wall opening.

Note :- For grouting of Steel frames in masonary installations ;cement sand mixture 1:3 ratio by civil contractor/fire

rated PU foam or such fire rated material may be recommended except head member.Door leaf should be minimum

46mm thick fully flush double skin door. Door leaf must be manufactured from 1.2mm(18gauge) thick galvanised steel

sheet. The infill material shall be resin bonded paper honey comb infill. All doors shall be factory prepped for

receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The

edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be

provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS

grade ball bearing type hinges of size 100x 75x3 mm alongwith all suitable hardware.Vision lite size 300x400 mm or

150 x 800mm(max area 0.12sqm) wherever applicable should be provided with single layered clear fire rated glass

panes as per guidelines laid down under IS 3614 2021 vide clause no. 7.2.7 table no. 2 with a clipon arrangement. The

glass will be provided with fire rated ceramic tape of min.2 mm thickness with min.15mm width alround on either

face. Every Glass pane must carry a permanent marking of its glass manufacturer Note:-As per drawings and design

supplied by architect and instruction given by authority and E.I.C.

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Lead Lined Doors:Providing and fixing Lead Lined Door of Navair make, comprising of Hardwood Frames, interlayered

with specified thickness of lead sheet and shutter comprising with approved material as per manufacturer

specification, the whole system shall be in accordance to AERB norms. The lead sheet Overlaps in frame & edge to

edge lead lining in shutters must be considered as approved by EIC.Door Frame: The Door Frames shall be hardwood

red merandi Frame, The Frame Shall be fully lead lined of 2 MM lead Sheet with 99% purity and as defined by AERB.

Frames should be fixed by anchor fasteners for installation on a finished plastered masonry wall opening. The size of

frame shall be min. 120 X 70 mm or as per approved manufacturer standard, with layered specified thickness of Lead

Line Sheets (in door type) being overlapped from either side, the finish of frame etc. shall be as per direction of

Engineer in Charge. Frame rebate shall be as per manufacturer standard, the finish of the door frame shall be wooden

primer finish as per EIC. The door frame shall be fixed with anchor fastener / dash fasteners or as per manufacturer Rupees Twenty Two

As Per Patdi SDH

154 60.00 and as approved by EIC. Shutter: Door leaf shall be 44 mm thick with commercial ply & laminate both side with or Smt 22725.00 Thousand Seven hundred

without vision lite.incase vision lite is required it shall be only Lead Glass as recomomnded by AERB/DRC .The internal Twenty Five Only

construction of the door should be rigid with lead line of 2mm thick all across the inside of the exposed surface.

Shutter shall be made with 6mm commercial borad and 35mm commercial board sandwitch between 2mm lead

sheet. All doors should be factory prepped for receiving appropriate hardware and provided with necessary

reinforcement for hinges, locks, and door closers as per ANSI Standard , the shutter shall be finished with approved

1mm thick laminate both side. Hardware: The hardware shall be fire rated hardware in accordance with requirement

of doors and as specified in the door type in the BOQ. The necessary reinforcement to be taken care if required while

placement of hardware. All the hardware shall be as approved by EIC and from approved makes only.

All hardware shall be with min. 2 years of warranty. Any miscellaneous items, accessories, screws, sealant, seals, filler

material etc. all to be consider to do the job and give full solution. No complaint shall be entertained & no additional

payment to be done. The whole system shall be factory prepped, the approved manufacturer and prime contractor

shall ensure about the zero leakage with including all hardware & fixtures. Note:-As per drawings and design supplied

by architect and instruction given by authority and E.I.C.

6 MM Thick Clear Fire rated Glass saint gobain make 200x300mm Rupees One Thousand Six

As Per Patdi SDH

155 30.00 Each 1666.50 hundred Sixty Six Paise Fifty

Mortise Shash Lock With SS Lever Handle Of SL7260/ TLH612 Becker F.S. Make (Required For Service Room Loction Rupees Three Thousand Two

As Per Patdi SDH

156 30.00 Such As AHU, Electrical Rooms Etc.) Set 3292.60 hundred Ninety Two Paise

Mortise Dead Lock with 80mm cylinder body both side key DL7260 Becker F.S. Dead Lock Make. (Required For Rupees Three Thousand

As Per Patdi SDH

157 30.00 SERVICES Door Location) Each 3075.45 Seventy Five Paise Forty Five

SS D Type Pull Handle of 300mm mm Long of PHD2230 Becker F.S Make. Rupees One Thousand Six

As Per Patdi SDH

158 30.00 Set 1676.60 hundred Seventy Six Paise

Door closers of BLC-604 Becker F.S Make. (Required For All Fire Doors Except Shaft Door) Rupees Two Thousand Three

As Per Patdi SDH

159 30.00 Each 2373.50 hundred Seventy Three Paise

As Per Patdi SDH SS 304 grade 300mm Long Towe Bolt of Becker FS Make with necessary screws as required. Rupees Four hundred

(Item No.186) Fourteen Paise Ten Only

As Per Patdi SDH Anchor fastners of HILTI of maximum 120mm length. Rupees Sixty Five Paise Sixty

(Item No.187) Five Only

As Per Patdi SDH Smoke seal 12x12mm Rupees One hundred Fifty

(Item No.188) One Paise Fifty Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density

Rupees Two Thousand

It Code No.22017 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held

163 130.00 Cmt 2738.08 Seven hundred Thirty Eight

Pg.No.173 and in position by criss cossing GI wire etc. complete as per directions of Engineer in- Charge.

Paise Eight Only

Providing and fixing in all exterior face panels breathable vapour barrier underneath the cement fiber board as per Rupees One hundred

It Code No.22018

164 75.00 National Building Code 2009 complete as per direction of Engineer-in-charge. Smt 171.73 Seventy One Paise Seventy

Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and Rupees Three Paise Ninety

connection etc. complete on terrace Five Only

Bed Head panel : Horizontal Bed Head Panel made by high strength aluminium section,thickness of aluminium section

3 mm. Bed Head Panels offered by us are available in Aluminum Powder coated with provision for Gas Outlets & Rupees Four Thousand Eight

166 RA 421.00 Electrical 5/15 Amps switch sockets. As per the demand of the clients, our bed head panel is offered with Nurse Call Rmt 4885.98 hundred Eighty Five Paise

cutout. Ninety Eight Only

Providing and fixing 4 mm thick both side laminated compact sheet selected quality (PIU approved brand list) fix in

aluminium door, window, ventilator shutters and partitions any size, any shape etc. P & F with EPDM/ PVC rubber Rupees One Thousand Three

167 RA 794.96 gasket etc all complete at all floors/all levels/all heights as per the architectural drawings and the directions of Smt 1308.09 hundred Eight Paise Nine

Engineer-in-Charge. Actual laying installed sheet shall be measured (Cost of aluminium snap beading shall be paid in Only

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

23061 as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or Rupees Seventy Two Paise

168 60.00 shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same Rmt 72.65

ch-23 pg-183 Sixty Five Only

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

23062 as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or Rupees Ninety One Paise

169 80.00 shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same Rmt 91.84

ch 23 pg-184 Eighty Four Only

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

23064 as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or Rupees One hundred Forty

170 408.00 shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same Rmt 148.12

ch-23 pg-184 Eight Paise Twelve Only

with adhesive solvent, including cost of all materials.

23028B1 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap (i) 15mm

Rupees One hundred Eighty

Six Paise Eighty Three Only

Providing and fixing 25mm size UPVC Ball Valve with necessary Adhesive and fittings as directed by Engineer in

Rupees Five hundred Forty

172 R.A 10.00 charge. Each 549.68

Nine Paise Sixty Eight Only

Providing and fixing 40mm size UPVC Ball Valve with necessary Adhesive and fittings as directed by Engineer in Rupees One Thousand Three

173 R.A 4.00 charge. Each 1345.71 hundred Forty Five Paise

Seventy One Only

SPECIAL NEED FOR DISABLED TOILET

Providing and Fixing EWC wall hung, Wash basin, Grab bar, Hinged rail & special faucet with spachula including seat

cover, and flush valve, fittings, nuts, bolts and gasket etc complete for disabled toilet of approved make and

conforming to IS Standards. Wash basin with one pair mounting brackets, Waste coupling 32 mm size full thread with Rupees Sixty One Thousand

174 RA 3.00 80 mm heightJaquar make with 7 years warranty: Chrome plated, Bottle trap Jaquar make with 7 years warranty: SET 61124.19 One hundred Twenty Four

Chrome plated etc., EWC S Trap & Cistern complete with fittings & seat cover, one no. hinged rail 750 mm & Two nos Paise Nineteen Only

of grab rails 600 mm ,etc. complete. Refer following product wise details,

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

ANAND SOR 2024- Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot

25 reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long pattern = White colour. Rupees Nine hundred Eighty

ITEM CODE : 23009 Paise Forty Seven Only

ANAND SOR 2024- Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the

Rupees One Thousand Three

25 trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for

176 49.00 NOS. 1356.81 hundred Fifty Six Paise Eighty

ITEM CODE : 23010 separately)(A) vitreous China Pattern :(i) in white colour.

ANAND SOR 2024- Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting

Rupees One Thousand Five

25 holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm

177 104.00 NOS. 1526.65 hundred Twenty Six Paise

ITEM CODE : 23018 size. (i) In white colour

Sixty Five Only

ANAND SOR 2024-

Rupees One Thousand

25 Providing and fixing Urinal or approved quality

178 20.00 NOS. 1074.86 Seventy Four Paise Eighty

ITEM CODE : 23033 including conecting the Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back or corner type

ITEM NO. : 23.122 size 430mm x 260mm x 350mm

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings

ANAND SOR 2024- such as lead valve less syphon, 15mm nominal size brass ball valve with polythene float, C.P brass handle unions and

Rupees Two Thousand Three

25 couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including

179 77.00 NOS. 2370.39 hundred Seventy Paise Thirty

ITEM CODE : 23013 cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to

ITEM NO. : 23.115 be measured and paid for separately)(A) Vitreous China (I) In white colour

WASTE COUPLING FOR BASIN

ANAND SOR 2024-

Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia

Rupees Eighty Nine Paise

180 ITEM CODE : 104.00 NOS. 89.83

Eighty Three Only

ANAND SOR 2024- PILLER COCK

25 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts.

Rupees Three hundred Eight

181 ITEM CODE : 104.00 (i) 15mm dia NOS. 308.73

Paise Seventy Three Only

ANAND SOR 2024-

Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin.

25 Rupees Two hundred Ninety

ITEM CODE : 23036 Five Paise Eighty Only

ANGLE VALVE Rupees Two Thousand

183 RA 200.00 Providing & fixing 15mm C.P. Angle valve with C.P. copper connecting pipe 450 mm long and nuts, washer and brass NOS. 2765.38 Seven hundred Sixty Five

flange complete, including cutting and making good the wall where required. Paise Thirty Eight Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

TWO WAY BIB COCK

Providing & fixing in position following approved quality water saving CP fittings / Fixtures of 15 mm nominal dia. with

ISI mark / approved make of following type including providing & fixing specials, wall flanges and fixing to concealed / Rupees Three Thousand

184 RA 77.00 exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of NOS. 3828.91 Eight hundred Twenty Eight

10 kg./ sq.cm, rectifying the leaky joints. if any, including cleaning etc. complete all as per specification. Paise Ninety One Only

Providing & fixing in position following approved quality water saving CP fittings / Fixtures of 15 mm nominal dia. with

ISI mark / approved make of following type including providing & fixing specials, wall flanges and fixing to concealed / Rupees Two Thousand Three

185 RA 77.00 exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of NOS. 2301.79 hundred One Paise Seventy

10 kg./ sq.cm, rectif.ying the leaky joints. if any, including cleaning etc. complete all as per specification. Nine Only

BRAIDED HOSE PIPE

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.50m long Flexible Rupees Seven hundred

186 RA 77.00 tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards. NOS. 789.82 Eighty Nine Paise Eighty Two

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using

ANAND SOR 2024- of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or Rupees Eight hundred Thirty

187 25 48.00 shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes Rmt 834.38

Four Paise Thirty Eight Only

ITEM CODE : 23066 and joints and jointed with adhesive solvent cement including cost of all materials.

For Soil & waste, Vent and Rain water pipe lines. 160 mm dia.

ANAND SOR 2024-

Rupees Eight hundred

Seventy Six Paise Ninety Only

Providing & fixing uPVC Floor P-Trap of following size having not less than 55mm effective water seal, fixing the trap in

position and connecting with waste water pipe by cement solvent/ as per manufacturer's recommandation,

embedding the trap in cement concrete 1:2:4 to correct level and gradient, providing and fixing 150 x 150 mm size top Rupees One Thousand Eight

189 RA 84.00 tile with central strainer & flat cover/ flush strainer, closing the side inletes with plugs if required etc. complete all as Each 1850.32 hundred Fifty Paise Thirty

per specification and as directed by the Engineer in charge. Two Only

Make : Astral, Supreme.

Providing and fixing stainless steel (SS304) Perforated grating 'of 18 gauge thick, with 'circular perforation

Rupees Two Thousand Eight

including Cockroach trap of 'approved pattern over CI/PVC 'traps. The grating shall be of size 153mm x 153mm or

190 RA 84.00 Each 2898.70 hundred Ninety Eight Paise

circular of 100mm dia '(as directed) and shall 'be set in cement, sand mortar 1:3 etc. complete.

Providing and fixing Height Riser of 110 x 75 x 50 size of approved make. Complete all as per specification and as Rupees One Thousand One

191 RA 84.00 directed by the Engineer in charge. Each 1113.02 hundred Thirteen Paise Two

Make : Astral, Supreme. Only

Making Khurras 45x45cm with average minimum thickness of 50 mm. cement concrete 1:2:4 (1 cement:2 coarse sand

Rupees One Thousand Four

:4 graded stone aggregate of 20mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement

192 RA 30.00 Each 1492.78 hundred Ninety Two Paise

plaster 1:3 (1 cement: 3 coarse sand) and a QUOTE of neat cement rounding the edge sand making and finishing the

Seventy Eight Only

outlet complete depth as per site requirement.

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside

plastering 15mm thick with Cement Mortar 1:3 (1Cement : 3-coarse sand) finished with a floating coat of neat

ANAND SOR 2024- cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm

25 nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep Rupees Eleven Thousand

193 ITEM CODE : 12.00 including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. Each 11042.74 Forty Two Paise Seventy

24008A (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing Four Only

ITEM NO. : 24.27 strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type depth

Metre for 150mm diameter sewer.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside

plastering 15mm thick with Cement Mortar 1:3 (1Cement : 3-coarse sand) finished with a floating coat of neat

ANAND SOR 2024-

cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm

25 Rupees Nineteen Thousand

nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep

194 ITEM CODE : 17.00 Each 19349.63 Three hundred Forty Nine

including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs.

24008B Paise Sixty Three Only

(Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing

strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type depth

Metre for 150mm diameter sewer.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside

plastering 15mm thick with Cement Mortar 1:5 (1Cement : 5-coarse sand) finished with a floating coat of neat

ANAND SOR 2024-

cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm Rupees Twenty Three

nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep Thousand Four hundred

195 ITEM CODE : 5.00 Each 23470.48

including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. Seventy Paise Forty Eight

(Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing Only

strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (3) C type depth

Metre for 150mm diameter sewer.

Providing & laying UPVC under ground drainage pipes & Fittings of Approved make for storm water drains & Sewer

lines of following size conforming to IS:15328 to proper level & grade, jointing including providing coupler with solvent

cement / welded joints / as per manufacturer's requirement, encasing the pipe alround using cement concrete 1:3:6 Rupees One Thousand Five

196 RA 240.00 complete if required all as per specifictions, drawing and as directed by the E.I.C. item includes Providing and fixing Rmt 1588.73 hundred Eighty Eight Paise

UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc For Sewer line and Storm Seventy Three Only

water Drains NOTE:- Cement concrete for encasing shall be paid under relevant item.160 mm DN (SN 8kN/m²)

200 mm DN (SN 8kN/m²) Rupees Two Thousand Two

197 RA 280.00 Rmt 2240.18 hundred Forty Paise Eighteen

Construction of Percolation well of size 3000 mm Dia including excavation, backfilling, watering, soling, compaction,

Reinforcement etc. complete. It includes Brick Massonry work (Calss of 7.5) R.C.C work of for walls, top and bottom

slabs, Rubble soiling and also having 100mm thick PCC in M-15 at bottom level. also In bottom layer Loose boulders,

Gravels and Coarse Sand layer also as per mendtioned in drawing. It shall be plastered with 20mm thick Plaster with

Rupees Five Lakh Five

198 RA 1.00 neat coat in CM 1:3 on internal and outside of chamber with 20mm thick sand faced cement plaster in CM 1:4 two Each 505000.00

coat at all sides. Top shall be covered with FRP Reccessed heavy duty Solid Top Manhole cover with clear opening of

600x600mm with frame and cover as Mentioned in Drawing. It shall be completed with all respect in ture line level,

plumb with neat & clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction.

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Valve Chamber (For Drainage)

Construction of Valve Chamber of size 900X900X1500 mm including excavation, backfilling, watering, soling,

compaction, Reinforcement, Rungs etc. complete. It includes Brick Masonry work (Class of 7.5) and R.C.C work of for

walls, top and bottom slabs, also having Rubble soiling and 100mm thick PCC in M-15 at bottom level. It shall be

plastered with 20mm thick Plaster with neat coat in CM 1:3 on internal and outside of chamber with 20mm thick sand Rupees Fifty Thousand Five

199 RA 1.00 faced cement plaster in two coat CM 1:4 at all sides. Top shall be covered with FRP Reccessed surface heavy duty Solid Each 50500.00

Top Manhole cover with clear opening of 600mm diameter with frame and cover as Mentioned in Drawing. It shall be

completed with all respect in ture line level, plumb with neat & clean surface as per coordinated infrastructure detail

drawing up to the level of satisfaction.

Providing and fixing PP-R (Poly propylene Random copolymer) pipes and fittings conforming to IS: 15801: 2019, and

international standards British Standard (BS EN) for PPR pipes and fittings would be under the EN ISO 15874 SKZ - Das

Kunststoff-Zentrum, the standard for PPR (Polypropylene Random Copolymer) pipes and fittings is typically governed

by the DIN (Deutsches Institute für Normung), which translates to the German Institute for Standardization. The

relevant DIN standard for PPR pipes is DIN 8077, and for PPR fittings, it is DIN 8078. Saudi Standards, Metrology and

Quality Organization (SASO) set the standards for products in Saudi Arabia. For PPR (Polypropylene Random

Copolymer) pipes and fittings, the specific SASO standard would be SASO 2874/2019. ISO (International Organization

Rupees One hundred Sixty

200 RA 193.00 for Standardization) 9001-2015 WRAS (Water Regulations Advisory Scheme) BS EN ISO 15874 Series: European Rmt 161.60

One Paise Sixty Only

standard for plastics piping systems for hot and cold water installations - Polypropylene (PP). Different parts of this

series cover pipes, fittings, and joints. BS 6920: Suitability of non-metallic products for use in contact with water

intended for human consumption with regard to their effect on the quality of the water.NSF/ANSI 14: NSF/ANSI

anti-microbial fusion welded, having thermal stability for cold water supply, including all PP- R plain & brass threaded

polypropylene random fittings, i/c fixing the pipe.

Internal work - Exposed on wall 20 mm (PN-16 SDR 7.4)

25 mm (PN-16 SDR 7.4)

Rupees One hundred Eighty

One Paise Eighty Only

32 mm (PN-16 SDR 7.4)

Rupees Two hundred Thirty

Three Paise Thirty One Only

40 mm (PN-16 SDR 7.4)

Rupees Two hundred Ninety

Two Paise Ninety Only

50 mm (PN-10 SDR 7.4)

Rupees Four hundred Forty

Six Paise Forty Two Only

65 mm (PN-10 SDR 7.4) Rupees Six hundred Fifty Five

Paise Forty Nine Only

80 mm (PN-10 SDR 7.4)

Rupees One Thousand Thirty

Nine Paise Twenty Nine Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and fixing PP-R (Poly propylene Random copolymer) pipes and fittings conforming to IS: 15801: 2019, and

international standards British Standard (BS EN) for PPR pipes and fittings would be under the EN ISO 15874 SKZ - Das

Kunststoff-Zentrum, the standard for PPR (Polypropylene Random Copolymer) pipes and fittings is typically governed

by the DIN (Deutsches Institute für Normung), which translates to the German Institute for Standardization. The

relevant DIN standard for PPR pipes is DIN 8077, and for PPR fittings, it is DIN 8078. Saudi Standards, Metrology and

Quality Organization (SASO) set the standards for products in Saudi Arabia. For PPR (Polypropylene Random

Copolymer) pipes and fittings, the specific SASO standard would be SASO 2874/2019. ISO (International Organization Rupees One hundred

207 RA 794.00 for Standardization) 9001-2015 WRAS (Water Regulations Advisory Scheme) BS EN ISO 15874 Series: European Rmt 179.78 Seventy Nine Paise Seventy

standard for plastics piping systems for hot and cold water installations - Polypropylene (PP). Different parts of this Eight Only

series cover pipes, fittings, and joints. BS 6920: Suitability of non-metallic products for use in contact with water

intended for human consumption with regard to their effect on the quality of the water.NSF/ANSI 14: NSF/ANSI

anti-microbial fusion welded, having thermal stability for cold water supply, including all PP- R plain & brass threaded

polypropylene random fittings, i/c fixing the pipe.

Concealed work, including cutting chases and making good the walls etc. 20 mm (PN-16 SDR 7.4)

25 mm (PN-16 SDR 7.4)

Rupees One hundred Ninety

Two Paise Ninety One Only

32 mm (PN-16 SDR 7.4) Rupees Two hundred

209 RA 48.00 Rmt 274.72 Seventy Four Paise Seventy

Providing and fixing of gunmetal, male or female threaded isolation control valve (Ball Valve / Gate Valve), confirming Rupees One Thousand Nine

210 RA 56.00 to latest IS PN 25 with necessary specials, union, nipples etc., to complete the job. 20 mm NOS. 1931.12 hundred Thirty One Paise

25 mm Rupees Two Thousand

211 RA 63.00 NOS. 2735.08 Seven hundred Thirty Five

Paise Eight Only

32 mm Rupees Four Thousand Six

Paise Sixty Seven Only

40 mm Rupees Five Thousand

213 RA 2.00 NOS. 5092.42 Ninety Two Paise Forty Two

50 mm Rupees Seven Thousand Six

214 RA 2.00 NOS. 7626.51 hundred Twenty Six Paise

65 mm Rupees Eleven Thousand Six

hundred Fifteen Only

80 mm Rupees Seventeen Thousand

216 RA 15.00 NOS. 17088.19 Eighty Eight Paise Nineteen

Providing following size Cast Iron / Spiroidal Iron Singal Air valve of PN 1.6 of approved quality and make conforming

to IS:14845 with ISI mark & Copper/Brass isolation Gate valve of PN as per air valve of approved quality and make

conforming to IS:778/IS:13114, Tapers and specials etc. including making necessary screwed / flanged joints by Rupees One Thousand Eight

217 RA 4.00 providing all jointing materials testing the joints and valves hydraulically to a pressure & duration as specified along NOS. 1867.49 hundred Sixty Seven Paise

with the pipeline all as per the specifications and as directed by the E.I.C. 25 mm size Forty Nine Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

DOMESTIC WATER TREATMENT PLANT

Supply installation, testing and commissioning of dometic water treatment plant comprising of Pressure sand filter,

and softner Plant accrording to input water quality/analysis. Water treatment plant consisting of FRP tank, filter

media, resins, brine tank, CPVC SCH 80 piping, isolation valves, instruments supports. The scope shall include CPVC

SCH 80 interconnection piping, Butterfly Cast Iron valves, NRV, instruments, autoback wash arrangement, Brine Rupees Three Lakh Fifty

218 RA 1.00 preparation tank & agitator platform, 1 nos Agitator require capacity and Ventury etc.complete the job .Scope shall SET 353500.00 Three thousand Five hundred

also includes one month operation including consumable and training for operation of staff. Only

Inlet Flow Range : 12.5 m3/hour.

Input Water Parameters: - As per Site

Output Water Hardness : < 50 PPM

Centtrifugal Monoblock Transfer pump

Supplying, installing, testing and commissioning of centrifugal pumps Complete with SS-316 casing, S.S 316 impeller

and SS-316 shaft, C.I. Base CED (Cathode Electrode Deposition) coating & head TEFC motor (with mechanical seal)

driven by 415 V AC, 3 phase, 50HZ., motor running at 2900 rpm speed , dry run protection, antivibration paid, 2 pole

Motor & IE3 Efficiency, shall be supplied with all accessories viz., base plate, coupling, motor etc. complete.

Contractor to submit performance curves and technical catalogue of the proposed model for review and information.

Panel mounted microprocessor based multi pump controller with large graphical display with VGA 240 x 320 pixels

and IP 55 enclosure, diodes to indicate pump ready, earthing, pump running and fault condition, Cascade Operation.

Each incomer and Outgoing feeder should be capable for protection against Overload, Short Circuit and Phase reversal Rupees One Lakh Fifty One

condition and shall be capable to communicate with other controllers following. The PLC shall support MODBUS-IP thousand Five hundred Only

communication for its compatability to intergrate with 3rd party BAS system. Controller shall authorise Read/Write

command via BMS.All alarms should be displayed in the controller. System should be equipped with dry running

protection. Indication of all type of faults / on-off status / electrical parameters shall be available on panel and central

IBMS monitors. On-off operation for all pumps shall be available on BMS system. SITC of elctronic type low water level

controler with LED panel to operate pump (necessary contacts along with minium one PLC operated spare contacts

required), shall prevent the pump from dry running

Mounting Height : 500mm from the bottom of Raw Water tank. Electronic type low, Medium & High water level

controller with LED panel to operate pump (necessary contacts along with minimum one PLC operated spare contacts

required),level controller with operational mode as one pump working at Medium level and cut off at High level

complete the job.

Mounting Height (Medium Level) : (Domestic Treated water Tank)

Mounting Height (Hight Level ): (Domestic Treated water Tank) with probe & all control wiring from Pump room Panel

to operate the system automatic/manual & shall prevent the pump from dry running.

Scope shall also include power and control cable of required size, termination, cable tray from Pump to Control panel,

control cable as whereever required etc. complete the job.

Set of accessories such as GI C Class headers of suction and discharge for (working and Standby pump assembly) with

CED Coating, Gun Metal Isolation valves, Gun Metal non return valves, pressure gauge with Isolation Valve of PN

etc. complete the job.

Capacity per pump - 12.5 m3/hour, Head - 30 mt, 1 Set = 2 Nos. Pump (1 Working + 1 Standby - cascade operation).

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

HYDRO PNEUMATIC SYSTEM FOR Domestic Water Distribution,

Variable Speed Hydro-booster System

Compact self contained Hydro-booster system comprising of following

SITC of In-line, vertical multistage, centrifugal clear water pumps with SS-304 casing, S.S 304 impeller and SS-304

shaft, C.I. Base CED (Cathode Electrode Deposition) coating & head TEFC motor (with mechanical seal), dry run

protection, antivibration paid, 2 pole Motor & IE3 Efficiency. Vendor to submit performance curves and technical

catalogue of the proposed model for review and information.

Panel mounted microprocessor based multi pump controller with large graphical display with VGA 240 x 320 pixels

and variable frequency drive (VFD) integrated in a single body, pressure sensor transmitter, IP 55 enclosure, diodes to

indicate pump ready, earthing, pump running and fault condition, Cascade Operation. Each incomer and Outgoing

Rupees Two Lakh Two

220 RA 1.00 feeder should be capable for protection against Overload, Short Circuit and Phase reversal condition and shall be SET 202000.00

capable to communicate with other controllers following. The PLC shall support MODBUS-IP communication for its

compatability to intergrate with 3rd party BAS system. Controller shall authorise Read/Write command via

BMS.System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in

the controller. System should be equipped with dry running protection. Indication of all type of faults / on-off status /

electrical parameters shall be available on panel and central IBMS monitors. On-off operation for all pumps shall be

available on BMS system. Electronic type low water level controller with LED panel to operate pump (necessary

contacts along with minimum one PLC operated spare contacts required), with probe & all control wiring from Panel

to tank to operate the system automatic/manual & shall prevent the pump from dry running.

Scope shall also include power and control cable of required size, termination, cable tray from Pump to Control panel,

control cable as whereever required etc. complete the job.

Pre-charged diaphragm pressure vessel with interchangeable membrane, charging connection, connected to outlet

header with necessary flanges, gaskets, isolating valves, nuts/bolts etc. complete (size of pressure vessel shall be as

per manufacturer recommendation).

Set of accessories such as GI C Class headers of suction and discharge for (working and Standby pump assembly) with

CED Coating, Cast iron control valves, Cast Iron non return valves, pressure transducers, pressure gauge with Isolation

Valve of PN 10 etc. complete the job.Require complete company fitted ready-to-connect packaged system.

Capacity per pump - 2.5 m3/hour, Head - 30 mt, 1 Set = 1 Nos. Pump (1 Working + 1 Standby - cascade operation),

Location - UGT Pump Room

Supply, Installation, Testing and Commissioning of 50 mm thick Pre Fabricated Modular Operation Theater Panels

(Walls and Ceiling) made out Polyurethane foam injected at 40 Kg/m3 sandwiched between 0.8 mm thick GP and SP

sheet on front side and 0.5 mm GP and SP/PPGI sheet on back-side. The inner surface walls be fixed to the bricks wall

with essential support. There will be minimum possible cavity/gap in between solid and steel walls and will be variable

to suit the architects lay out for the flush mounting of the equipments. The wall and ceiling panels must comply with

necessary provision of to JIS Z 2801/ISO 22196, BS EN 1363-1:2020, EN 1363-2:1999, EN 1364-1:2015, DIN 52210-

2:1984-08, DIN 4102-1, Class A2. Any Third-party compliance certificate mandatory. Panel should be covered with Rupees Six Thousand Five

221 368.00 protective sheath of 300 d.f.t Anti-bacterial Paint having undergone Washability/Water resistance Test JIS K Smt 6550.00

hundred Fifty Only

5663.7.12, permeability test less than 200 unit of permeability, Anti-bacterial effect against staphyloccoccus aureus,

Escherichia coli (via HALO test) and safety and causative agents such as formaldehyde, toluene, xylene,

paradichlorobenzene etc. Third party (NABL approved Lab) certification for EGP and thickness test certificate to be

at time of supply.

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Supply, Installation, Testing and Commissioning of Ceiling Filtration System - The ceiling filtration system in the

surgical theatre should ensure a unidirectional distribution of sterile air, covering all areas affected by the airflow. It

should consist of a laminar flow system incorporated within a frame made from thick extruded aluminum profiles,

complete with a sealed gasket to prevent leaks. The system should incorporate "H 14" class HEPA filters positioned in

the ceiling plenum. These filters should achieve an MPPS average efficiency greater than 99.95% and a 3-micron DOP

efficiency greater than 99.99%. The filters should also be designed to handle a final pressure drop of no more than Rupees Three Lakh Ninety

600 Pa, operate at a maximum temperature of 60 degrees Celsius, and function effectively within a relative humidity thousand Only

range of 40-50%. The filtration ceiling system should be capable of maintaining a constant airflow velocity of 0.25 m/s

at the diffuser. This should be accomplished through the use of a diffuser or flow equalizer that ensures uniform and

constant air distribution over the entire surface area.

The flooring within the surgical theatre should consist of a minimum of 2mm thick antistatic seamless PVC, ensuring

durability and safety. This floor should be smooth, non-slip, and made from an impervious material with sufficient

conductivity to dissipate static electricity effectively, yet not so conductive as to risk electric shock to personnel. The

PVC used should be of very high quality, particularly designed for electrostatic charge dissipation, and should not be

less than 2 mm in thickness. The installation process should utilize continuous rolls, and joints should be seamlessly

welded using special PVC thermal welding units with welding bars of the same color to ensure uniformity and prevent

contamination. The sheets should be highly durable, capable of resisting shocks, indentations, and scratches. The

conductive material should be uniformly impregnated within the PVC as grains to enhance its antistatic properties.

Additionally, the flooring should be inert to body fluids, chemicals, and disinfectants, and remain unaffected by

temperature variations typical within an operating theatre. It should efficiently discharge electric charges up to 2 kV,

and the electrical resistance (point to ground) should be maintained within 2.5x10^4 to 5x10^6 ohms, ensuring no Sq Rupees Four Thousand Two

buildup of electrical charge beyond 100 volts. Floor installation should be performed by skilled workers from Mtrs. hundred Fifty Only

accredited agencies authorized by the PVC sheet supplier. The structure holding the filtration system, including the

filter frames and top plenum, should be made from either aluminum or stainless steel. The system should be CE/UL

certified and designed to achieve an ISO 14644/1 classification of ISO 5, with a bacteriological class of B (5 CFU/m3)

and particle decontamination kinetics CP of 5 minutes. After installation, the system's performance should be

validated by a third-party government-approved environmental lab to ensure compliance with specified standards. A

positive pressure should be maintained inside the operating theatre to prevent contamination from external air

The supplier should provide test certificates for the HEPA filters and the laminar airflow systems from the original

manufacturers. Furthermore, the size of the laminar airflow system should be a minimum of 8 feet by 8 feet. Finally,

the entire system should meet CE/BIS certification standards, ensuring it adheres to both European and Indian safety

and performance regulations and including validation. The installation should include a conductive copper grid

beneath the PVC sheet, supported by liquid epoxy compounds to create a uniform and level surface. Copper strips

should be made visible by grinding and not project more than 0.5mm above the floor level to prevent damage to the

PVC sheet, with one earthing lead brought out from every 150 sq.ft area and attached to the main earthing

strip/ground. The flooring should also be mechanically shockproof, scratchproof, flame retardant, and antimicrobial.

Corners of the flooring should be uniformly curved, and a concealed cove-former (aluminium) should overlap the wall

panel to a height of approximately 25mm and be sealed perfectly and uniformly. Before laying the PVC, suitable self-

leveling compounds should be used to prevent any undulations within the operating theatre. The final surface should

be non-corrosive to biological fluids and detergents, with a color that is uniform, pleasant, and matching with the

ambience as approved by the respective consignee.

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

The door to the surgical theatre should be a hermetically sealed, single sliding door measuring 2.1 meters in height

and 1.5 meters in width. The door should be equipped with a controller capable of being operated by elbow switches,

foot switches, and a touchless sensor, providing multiple, accessible control options. The track for the door should be

made from stainless steel or aluminum, with the running surface for the top rollers angled appropriately to minimize

resistance and facilitate smoother movement. The door leaf should be suspended using high-quality hard plastic

rollers with double bearings at the top. These rollers should run under the stainless steel or aluminum track to ensure

smooth and noiseless operation. The opening and closing mechanisms of the door should be controlled by a

microprocessor for precise electromechanical movement. The material of the door should be either SMS or HPL, with

a color that matches the interior design. The door should be designed to be strong yet lightweight for ease of use. In

case the automatic mechanism fails, the door should still be able to open and close effortlessly manually. The handle Rupees Two Lakh Ninety

of the door should be made from stainless steel with a matte finish and equipped with a high-quality cylindrical or Five thousand Only

ESPg lock for security. The door leaf should incorporate a high-quality synthetic rubber gasket with long durability to

ensure hermetic sealing and maintain a 99.99% air tightness at a minimum pressure of 75Pa. The floor on either side

of the door should be perfectly level, with a maximum permissible difference of +1mm, to avoid any tripping hazards

or unsealed gaps. The overall thickness of the finished door should range from 30-60mm, with the inner part of the

door filled with CFC-free polyurethane foam, approximately 48mm thick, sealed airtight to block any microbial ingress.

The door and its controls should comply with IEE regulations, utilizing DC brushless or PMDC motors that are

effectively isolated from mains power to ensure safety and reliability.

Additionally, the door should include a vision window measuring 300mm x 300mm, featuring double-glazed panels

that are hermetically sealed to maintain the integrity of the seal.

The movement of the door should be as quiet as possible, and the time to start moving after

receiving a signal should be adjustable between 0.5 to 20 seconds.The door controller should be CE marked, BIS

certified, or IEC 60601 certified to meet international and national safety standards. A test certificate for the

hermetically sealed door frame should be included in the pre-dispatch documents to verify compliance with the

specified standards and functionality.

Supply, Installation, Testing and Commissioning of Membrane-Type Operation Switch and Communication Controller -

The Operation Switch and Comms Controller should encompass all necessary controls to ensure the proper operation

and monitoring of equipment and services in the operating room (OR). Positioned for optimal visibility in the

surgeon's line of sight and the OT staff, the wall-mounted membrane-buttons should be easily accessible to the nurse

for operation and assistance. In addition to hosting a digital clock and elapsed time indicator, the panel should feature

a medical gas alarm, clearly indicating high and low gas pressures for each gas service, including vacuum, supported by

an audible alarm. The Operation Switch and Comms Controller should also provide an alarm mute option for fault

annunciation, with pressure sensors strategically located near isolation valves. Controls for general lighting, including

ON/OFF and dimming, organized in groups for uniform illumination, should be present. Furthermore, the panel should Rupees One Lakh Ninety

225 2.00 facilitate control over operating lights (major and satellite) and camera functions (on/off and intensity). A hands-free Nos. 195000.00

Five thousand Only

telephone set with memory should be conveniently situated, and temperature and humidity controls for the room,

linked to the AHU (+/5%) using NO/NC or Chilled Water/Hot Water Actuator Control Valve (whichever is applicable),

should be adjustable from the Operation Switch and Comms Controller. Real-time indicators, such as a digital room

pressure indicator and HEPA filter bank differential pressure indicator, are essential for monitoring and maintaining a

safe and controlled environment in the operating room. Telephone with Alpha-numeric keyboard is required with

Speed-dialing option

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Hatch boxes should be provided in each operating theater to facilitate the safe and efficient removal of waste

materials to the dirty linen area or adjacent corridor. Each hatch box should be equipped with two doors, operated

electrically or motorized, designed such that only one door can be opened at a time to prevent cross-contamination.

UV lighting should be installed to ensure sterilization and should remain on when both doors are closed, automatically Rupees One Lakh Fifteen

turning off when either door is opened. Indicators should be provided on both sides of the operating theater to thousand Only

monitor the door open/close status. The material of the hatch box should also be SS304 grade stainless steel, with a

minimum size of 600mm x 600mm.

In each operating theater, an operating list board should be installed. It should be made of ceramic with magnetic

properties and should be flush with the wall to maintain cleanliness and ease of use. LED type flat panel X-ray viewing

panels should be provided, complying with relevant electrical safety codes, and mounted flush with the wall to

prevent dust accumulation and microbial growth. The body should be made of extruded aluminum, powder-coated

Rupees Twenty Eight

227 2.00 with a bacteria-resistant and disinfectant-resistant finish. The diffuser on the front panel should provide a uniformly lit Nos. 28500.00

Thousand Five hundred Only

screen, and dimming controls should be easily accessible. Additionally, a proper spring-loaded film clip with rollers

should be included to securely hold and easily remove films without causing scratches.

LED type flat panel X-ray viewing panel should be supplied. This should comply with relevant electrical safely codes.

This should be a 2-panel viewing screen. Mounting should be flush with the wall to avoid dust accumulation and

growth or organisms between wall and panel. Body should be of extruded aluminium powder coated black with

bacteria resistant and disinfectant resistant finish. The diffuser on the front panel should be a uniformly lit screen. Rupees Forty One Thousand

Dimming electronic control should be enclosed at the bottom of the cabinet. Proper spring-loaded film clip with Five hundred Only

rollers should be provided to hold the films firmly and to remove the film without scratches

Supply, Installation, Testing and Commissioning of Double-Bay Scrub Sink - The scrub station should be compact,

designed for use in the OT complex, and facilitate pre-procedural scrubbing. It should be made from heavy gauge type

304 stainless steel with a minimum thickness of 1.5mm and feature seamless welded construction polished to a satin

finish. The scrub sink should have a front access panel for easy maintenance of water control valves, waste

connections, stoppers, and strainers. Hands-free operation should be enabled through infrared sensors with Rupees One Lakh Twenty Six

programmable adjustments. Thermostatic mixing valve control should maintain constant water temperature and be thousand Only

located behind the access panel. Timing should be adjustable to meet individual usage requirements, and units should

have reduced anti-splash fronts. An additional knee/foot-operated switch should also be provided for enhanced

Supply, Installation, Testing and Commissioning of Storage Units - Storage units should be constructed with same

material, as wall and ceiling panels. The shelves, made of glass and, should be removable for cleaning. The unit should

be divided into two or more parts, each with individual glass doors equipped with a high-quality locking system. The Rupees Eighty Five

overall size of the storage unit should Thousand Only

be approximately 200 cm (H) x 120 cm (W) x 35 cm (D).

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Supply, Installation, Testing and Commissioning of Peripheral Lighting - To enhance the operational environment of

each operating theatre, peripheral lighting and clean room luminaries should be installed, with a minimum of eight

units per theatre. These lights should offer an intensity of at least 500 Lux and be housed in highly specular anodized

aluminum with an optical antiglare system to minimize visual fatigue and glare. Each peripheral light should measure

2' x 1'. The covers for these luminaries should be constructed from highly resistant, disinfectant-proof laminated

safety glass or acrylic, featuring a stylish, fine-grained surface that complements the clean and sterile environment of

the operating theatre. The body of the luminaries should be made from sheet steel, perfectly powder-coated to resist

contamination and facilitate easy cleaning, and should be ready for connection either as individual units or within a

series circuit. This setup should include digital electronic control gear utilizing multilamp technology to optimize Rupees Twelve Thousand

231 20.00 energy efficiency and light output. The installation of these luminaries should ensure that the recess frames are gas Nos. 12000.00

tight. Each fitting should be flush with the ceiling and designed to be removable from either the top or bottom for

ease of maintenance. It is crucial that the light fittings are uniformly and aesthetically distributed across the ceiling to

provide consistent illumination throughout the OT, without interfering with visibility during procedures such as green

mode endoscopy. Furthermore, the peripheral lighting system should conform to IP65 or IP54 international protection

ratings, ensuring that the fixtures are dust tight and protected against water ingress, suitable for the demanding

conditions of an operating theatre.

Supply, Installation, Testing and Commissioning of Electrical Wiring inside OT - Power distribution within each

Operating Theatre (OT) should be handled via distribution boards located locally to each theatre using Fire Resistance

Low Smoke Wiring, layed in PVC conduits of reputed brand. The sub mains power to these panels should be provided

by the general electrical contractor, and all distribution services within the departments should run from these panels.

The power distribution unit should hold certifications such as EN, CE, FDA, IEC, and BIS to ensure compliance with

international safety and performance standards. Each wall of the MOT should have a minimum of two hybrid switch

sockets (6/16A) on each wall, in compliance with IEC standards. Light fittings within the clinical areas should be

recessed LED types equipped with control gear and sealed in accordance with the IP54 standard. This standard

ensures that the fittings are protected against limited dust ingress and water spray from all directions, suitable for

clinical environments. All equipment should be fully and permanently labeled to clearly identify and describe the

function, operation, and voltage of the apparatus concerned. Upon completion of the electrical installation, tests Rupees Two Lakh Ninety

should be carried out in accordance with the relevant sections of local wiring regulations, with results duly recorded. Nine thousand Only

Each OT should have a distribution board (DBs) installed, with suitable wiring. A separate enclosure should house all

high-voltage equipment to ensure safety and isolation. The remote cabinet should contain operating lamp

transformers, mains failure relays, UPS, electrical distribution equipment, and circuit protection equipment for all

circuits within the operating theatre. All internal wiring within the DBs should terminate in connectors equipped with

screws and clamp springs. Connections should be of the clip-on type mounted on a rail approved by CE/IEC/BIS

standards and labeled with indelible proprietary labels. All internal circuits should be protected by individual fuses or

miniature circuit breakers to ensure safety and manage potential electrical faults effectively.

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

AIR HENDALING UNIT Make:KrVelocity: Not More Then 10 mt/second. , Canvass Connection-Heavy duty, non partical

shreding,Fire Retardentuger,Nikotra only , Type: PLUG,Drirect Driven,Dynamically Balanced Selection of fan-Should

run comfortably at 50 HZ at rated capecity. Motor Make:Siemence,B.B,Crompton,ABB , Type:TEFC, IP:55, Foot

Mounted, VFD compitable and I2 generation Safety: Motor should have interlocked with AHU Motor door/excess/Fire

DamperType-TWO TIRE, Floor Mounted , Inner const.:0.6mm plain G.I , Outer const.:0.8 mm G.I. Pre coated / Powder

coated Thickness of Insulation: 25mm,PUF injected having density 40 to 42 kg/m3. ,Colour:As approved by CLIENT Rupees Twelve Lakh Twenty

CONDENSING UNIT : Condensing unit for AHU with all Five thousand Only

assesories and instalation (Copper pipie provide 3 mtr Only Extra will charged extra) consider 1200 sqfeet

insulation and ducting

Double Dome OT Light with Ceiling mounted Double Dome LED OT lights having following features and enclosed

technical specifications, having Mobile App Connectivity, Battery Backup

-Light intensity Ec - 160 000 & 160 000 lux, - Light intensity adjustment - 10 – 100% (using Digital Capacitive Touch

(Fully Remote Controlled)

- Color temperature Tc (with adjustment)

-Light field diameter d10 at Ec - 100 - 150 mm

-Working range - 1 m Rupees Three Lakh Ninety

234 2.00 -Color rendering index 93Ra Nos. 390000.00

- Focusing Preset: Adjustable

- LED Average life - 50000-60000 hrs

- Diameter of Light - not less than 650 mm per dome

- Power Consumption - not more than 120W

OT Light should be BIS marked; manufacturer should have CDSCO License for this product under Class A, Compliant to

IEC standards such as IEC60601-1:2005+A2:2020, IEC 60601-2-41:201 (Relevant Test Certificates to be submitted with

Bid) Clause-wise Technical Compliance to be

Single-arm surgery/anesthesia pendant designed for Operating Theatres should feature a compact, modular

configuration to meet the precise requirements of hospitals, enabling customization to suit specific operational needs

of both Operating Theatres and Intensive Care Units. It should be equipped with robust ceiling support capable of

mounting a selection of arms. The extension arm, pivotal for functionality, should allow horizontal movement with a

radius of 800-900mm and provide a level rotation ranging from 0 to 330/340 degrees, with both the extension arm

and terminal box designed to rotate together and independently for maximum versatility. The pendant should support

a net loading capacity of min. 100 kg, accommodating a variety of medical instruments and devices securely. For

Rupees Two Lakh Eighty

235 2.00 medical and electrical services, it should offer configurations that include at least two oxygen outlets, two vacuum Nos. 284000.00

Four thousand Only

outlets, one medical air, one medical air at 7 bar, and an optional nitrous oxide outlet (In-scope of MGPS vendor)

Additionally, there should be six main sockets, each capable of supporting 5 to 15 amps, conforming to universal

standards to facilitate the operation of various medical and electronic devices. In terms of materials and construction,

the pendant should be crafted from high-strength aluminum alloy with a sealed design to enhance durability and

maintain sterile conditions.

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

The arm itself should be made from high-density aluminum alloy extrusion, ensuring both strength and reliability.

Installation of the pendant should be ceiling-mounted to provide a reliable and firm setup, optimizing space usage in

the Operating Theatre or ICU while seamlessly integrating with existing medical systems for managing medical gas,

electrical services, data communication, and equipment. Additionally, the pendant should include practical features

such as a stainless steel IV pole and a ward vacuum unit clamp to further enhance its utility in a medical setting. With

a net weight of approximately 105 kg, accessible by the equipment carrier, the pendant should be robust yet

manageable, ensuring it meets the rigorous demands of modern medical environments.

Providing and fixing UPS (25KVA) Of Good Quality as directed by engineer incharge

Rupees Three Lakh Seventy

Five thousand Only

Medical Gas Pipe Line Of Required dia for OT oxygen , Vaccum , Air.. Etc reuired Point(from existing line ) as directed

Rupees Three Lakh Forty

237 2.00 by engineer incharge from Outer Nearest Passage to OT Pendant Rate Including , Alarm , Valve (for all line) , Point job 345000.00

Five thousand Only

,Flowmeter and Probe . if alredy then no payment given

10 x10 Oxygen Manifold with NRV, tail pipes and middle frame with chain as per Tender

Ayurvedic College Rupees Three Lakh Fifty

Specification attached.

238 & Hospital Building 2.00 Sets 350470.00 thousand Four hundred

at Narol Seventy Only

02+02 Cylinders Emergency Oxygen Manifold with NRV middle frame and High Flow

Ayurvedic College

Regulator without Rubber Diaphragm as per Tender Specification attached. Rupees Fifty Five Thousand

239 & Hospital Building 2.00 Sets 55001.57

One Paise Fifty Seven Only

Oxygen surface mounted Outlets NFPA/HTM Standard as per Tender Specification

Ayurvedic College Rupees Five Thousand Six

attached. (BS Metal Outlet)

240 & Hospital Building 100.00 Nos 5600.45 hundred Paise Forty Five

Oxygen Flow Meter with Humidifier Bottle as per Tender Specification attached.

Ayurvedic College Rupees Three Thousand

241 & Hospital Building 100.00 Nos 3939.00 Nine hundred Thirty Nine

Oxygen Probe as per Tender Specification attached.

Ayurvedic College Rupees One Thousand Two

242 & Hospital Building 100.00 Nos 1297.85 hundred Ninety Seven Paise

at Narol Eighty Five Only

Compressed Air System as per Tender Specification attached.

Ayurvedic College Triplex System- Screw Air Compressors (Total Flow 4500LPM) with 15HP motors with start/stop operations. 1 Nos. Rupees Twenty Eight Lakh

243 & Hospital Building 1.00 heatless dryer assy each having 175 cfm maximum capacity along with 4 stage bacterial filter assy and single Receiver Sets 2854063.05 Fifty Four thousand Sixty

at Narol of 2000 liter water capacity, nrv and Isolation valve, Gauges etc. Three Paise Five Only

Surface Mounted Gas outlets for Medical AIR NFPA/HTM Standard as per Tender

Ayurvedic College Rupees Five Thousand Six

Specification attached. (BS Metal Outlet)

244 & Hospital Building 45.00 Nos 5600.45 hundred Paise Forty Five

Suitable Probe for Medical Air gas outlets as per Tender Specification attached.

Ayurvedic College Rupees One Thousand Two

245 & Hospital Building 45.00 Nos 1297.85 hundred Ninety Seven Paise

at Narol Eighty Five Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Surface Mounted Gas outlets for Surgical AIR NFPA/HTM Standard as per Tender

Ayurvedic College Rupees Five Thousand Six

Specification attached. (BS Metal Outlet)

246 & Hospital Building 45.00 Nos 5600.45 hundred Paise Forty Five

Suitable Probe for Surgical Air gas outlets as per Tender Specification attached.

Ayurvedic College Rupees One Thousand Two

247 & Hospital Building 8.00 Nos 1297.85 hundred Ninety Seven Paise

at Narol Eighty Five Only

Vacuum Central System as per Tender Specification attached. Rupees Twenty Two Lakh

Ayurvedic College Complete Triplex Vacuum Vane Pumps set Model ----------- - (Total 2500 Flow LPM) with Filter, interconnecting pipes, Thirty Eight thousand Nine

248 & Hospital Building 1.00 NRV, isolation valves, auto switch gear assy, exhaust silencer,bacteria filters and a single Receivers having – 1500 liters Sets 2238915.48

hundred Fifteen Paise Forty

at Narol capacity Eight Only

Surface Mounted Gas outlets for Medical Vacuum NFPA Standard as per Tender

Ayurvedic College Rupees Five Thousand Six

Specification attached. (BS Metal Outlet)

249 & Hospital Building 45.00 Nos 5600.45 hundred Paise Forty Five

Vacuum Probe Suitable for Outlet as per Tender Specification attached.

Ayurvedic College Rupees One Thousand Two

250 & Hospital Building 45.00 Nos 1297.85 hundred Ninety Seven Paise

at Narol Eighty Five Only

High Pressure Tubing as per Tender Specification attached.

Ayurvedic College Rupees Two Thousand Nine

251 & Hospital Building 45.00 Mtrs 2941.12 hundred Forty One Paise

at Narol Twelve Only

Copper Pipe: - Lloyd's certified EN13348 as per Tender Specification attached.

Ayurvedic College

12x0.7mm Copper pipe Rupees Eight hundred

252 & Hospital Building 500.00 Mtrs 870.62

Seventy Paise Sixty Two Only

15x0.9mm Copper pipe

Ayurvedic College Rupees One Thousand Two

253 & Hospital Building 650.00 Mtrs 1242.30 hundred Forty Two Paise

at Narol Thirty Only

22x0.9mm copper pipe

Ayurvedic College

Rupees One Thousand Sixty

254 & Hospital Building 350.00 Mtrs 1068.58

Eight Paise Fifty Eight Only

28x0.9mm Copper Pipe

Ayurvedic College Rupees One Thousand

255 & Hospital Building 250.00 Mtrs 1753.36 Seven hundred Fifty Three

at Narol Paise Thirty Six Only

High flow piston Regulator IS/ ISO 7396 IS/ISO 10524-2 -2016 , IS/ISO 10524-4:2008

Ayurvedic College Rupees Twenty Eight

HTM 02-01 ClassII b MDR 2017/745

256 & Hospital Building 8.00 nos 28179.00 Thousand One hundred

at Narol Seventy Nine Only

Area Alarm Panel (Digital Illuminated LED - Microprocessor Based with Touch Function Rupees Twenty Nine

Ayurvedic College

and Audio-Visual Indication) as per Tender Specification attached. 2 Gas Alarm Panel Thousand Three hundred

257 & Hospital Building 8.00 Nos 29363.73

Sixty Three Paise Seventy

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Isolation Valve: - with Nut & Nipple Type Brass Fittings/SS Flange, (no ferrule/copper

Ayurvedic College Rupees Two Thousand Nine

ring type brass fittings) as per Tender Specification attached. 15mm Isolation Valve

258 & Hospital Building 160.00 Nos 2974.45 hundred Seventy Four Paise

at Narol Forty Five Only

22mm Isolation Valve

Ayurvedic College Rupees Three Thousand

259 & Hospital Building 40.00 Nos 3444.10 Four hundred Forty Four

at Narol Paise Ten Only

28mm Isolation Valve

Ayurvedic College

Rupees Five Thousand Forty

260 & Hospital Building 30.00 Nos 5040.91

Paise Ninety One Only

Supply, Installation, Testing and Commissioning of Electric driven Fire pump suitable for automatic operation and

consisting of following: complete in all respect as required.

a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest

outlet at specified flow of 2280 lpm at 70 m. head conforming to IS standards.

b) Casing - CI, Impeller-Bronze, Shaft - SS 410, Mechanical seal

c) Squirrel cage induction motor with suitable HP with synchronous speed 2955 RPM, Suitable for operation on 415 Rupees Two Lakh Fifty Six

261 RA 1.00 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Set 256260.00 thousand Two hundred Sixty

Conforming to IS standards. Only

d) Common Base plat for Pump and motor and coupling, coupling guard, rubber bellows, anti-vibration arrangement,

cables & other accessories as required for complete Installation of pump set.

e) Cement concrete foundation with cement concrete plaster will be in civil scope.Contractor has to provide

foundation drawing to civil contractor.

Supply, Installation, Testing and Commissioning of Diesel Engine driven fire pump (Standby Pump) suitable for

automatic operation and consisting of following: complete in all respect as required.

a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest

outlet at specified flow of 2280 lpm at 70 m. head conforming to IS standards.

b) Casing - CI, Impeller-Bronze, Shaft - SS 410, Mechanical seal

c) Diesel Engine with suitable HP with synchronous speed 2300 RPM, diesel tank, battery, exhaust pipe with Rupees Five Lakh Forty

262 RA 1.00 insulation, all required accessories. Set 540403.00 thousand Four hundred

Exhaust pipe will be as per manufacturer's standard. Three Only

d) Common Base plat for Pump and motor and coupling, coupling guard, rubber bellows, anti-vibration arrangement,

cables & other accessories as required for complete Installation of pump set.

e) Cement concrete foundation with cement concrete plaster will be in civil scope.Contractor has to provide

foundation drawing to civil contractor.

Supply, Installation, Testing and Commissioning of Electric driven pressurization Jockey pump suitable for automatic

operation and consisting of following: complete in all respect as required.

a) Vertical inline pump to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified flow

of 180 lpm at 70 m. head conforming to IS standards.

b) Casing - SS 304, Impeller-SS 304, Shaft - SS 304, Mechanical seal

c) Squirrel cage induction motor with suitable HP with synchronous speed 2900 RPM, Suitable for operation on 415 Rupees One Lakh Three

263 RA 1.00 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Set 103495.00 thousand Four hundred

Conforming to IS standards. Ninety Five Only

d) Common Base plat for Pump and motor and coupling, coupling guard and other accessories as required for

complete installation of pump set.

e) Cement concrete foundation with cement concrete plaster will be in civil scope.Contractor has to provide

foundation drawing to civil contractor.

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Supply, Installation, Testing and Commissioning of 150 mm dia. Pressure Gauge (for all pipes) of range 0 - 15 Kg / cm²

Polished Stainless Steel Case with positive seal against weather, moisture & dust, with Glycerine filled, screwed, Rupees Three Thousand

nipple, isolation valve, U-type stainless steel siphon tube and complete with necessary as required. Seven hundred Five Only

Supply, Installation, Testing and Commissioning of Pressure Switches for automation of fire pumps. Pressure switches

Rupees Three Thousand

265 RA 4.00 shall be SPDT type suitable for single phase supply with diaphragm, IP 67 protection as required. Nos. 3304.00

Three hundred Four Only

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes

of Class C (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees /

elbows / reducers / couplings / unions / bends / flanges/ wrapping coating for u/g pipes etc., and laying on the surface

including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and Rupees Four Thousand One

266 RA 17.00 testing after Installation etc. as per specifications complete as required. Rmt. 4112.00

hundred Twelve Only

All fittings up to 50mm shall be forged and above 50mm shall be butt welded.

Rupees Two Thousand Eight

hundred Fifty Five Only

Rupees One Thousand Nine

hundred Thirty Four Only

Rupees One Thousand Three

hundred Fifty Seven Only

e) 65 mm dia Rupees One Thousand One

hundred One Only

f) 50 mm dia Rupees Nine hundred Ninety

g) 40 mm dia Rupees Seven hundred Fifty

h) 32 mm dia Rupees Six hundred Twelve

i) 25 mm dia Rupees Four hundred

Seventy Four Only

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded,

Underground M.S. Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U clamps with

Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / wrapping coating 4mm thick /

150mm width as per IS:10221 etc., and two coats of anticorrosive primer and testing after Installation etc. as per Rupees Two Thousand Five

specifications complete as required. hundred Sixty Seven Only

All fittings up to 50mm shall be forged and above 50mm shall be butt welded.

Rupees One Thousand Eight

hundred Twenty Nine Only

Supply, Installation, Testing and Commissioning of C.I. Y type Strainer with S.S. Screen/SS 304 having 1.2mm

Rupees Forty Thousand Five

277 RA 2.00 perforation with require accessories. Nos. 40541.00

hundred Forty One Only

Supply, Installation, Testing and Commissioning of C.I. Sluice valve (IS: 14846,PN 16) with flanges, nut bolts, gaskets Rupees Sixty One Thousand

278 RA 4.00 complete as required. Nos. 61948.00 Nine hundred Forty Eight

a) 200 mm dia. Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

b) 150 mm dia. Rupees Twenty Six

279 RA 4.00 Nos. 26192.00 Thousand One hundred

Ninety Two Only

c) 100 mm dia. Rupees Seventeen Thousand

Forty Four Only

d) 80 mm dia. Rupees Eleven Thousand

281 RA 1.00 Nos. 11879.00 Eight hundred Seventy Nine

Rupees Nine Thousand Four

hundred Seventy Five Only

Supply, installation, testing and commissioning of C.I. Butterfly valve (IS:13095 , PN 16) with flanges, nut bolts, gaskets Rupees Nine Thousand

283 RA 6.00 complete as required. Nos. 9767.00 Seven hundred Sixty Seven

a) 150 mm dia. Only

Rupees Five Thousand Five

hundred Seventy Three Only

Rupees Four Thousand Two

hundred Twenty Eight Only

d) 50 mm dia Rupees Three Thousand

Three hundred Only

Supply, Installation, Testing and Commissioning of Cast iron Dual plate Check valve (PN 1.6) Rupees Ten Thousand Two

a) 150 mm dia. hundred Sixty Only

b) 100 mm dia. Rupees Seven Thousand Five

hundred Forty Only

Rupees Five Thousand Three

hundred Twenty Nine Only

Supply, Installation, Testing and Commissioning of Air vessel of size 450 x 2000 mm long fabricated from 8 mm thick

M.S Plate and installed vertically on suitable legs. legs shall be provided with M.S. plate of size 50mmx50mmx6mm at Rupees Sixty Thousand Two

bottom with necessary accessories. as required for complete installation. hundred Twenty Eight Only

Supply, Installation, Testing and Commissioning S.S. Fire Hydrant Single Landing Valve with 80 mm N.B. flanged inlet,

SS spindle controlled 63 mm dia female instantaneous outlet type. SS coupling, blank cap, chain, twist release type Rupees Four Thousand

291 RA 31.00 lug & all accessories Conforming to IS:5290. Including fixing with anchor fastener and flanged tapping from wet riser Nos. 4774.00 Seven hundred Seventy Four

complete as required. Only

Supply, Installation, Testing and Commissioning of Fire Hose Cabinet wall mounting type 18swg (750 mm x 600 mm x Rupees Three Thousand

292 RA 36.00 250 mm deep) with required accessories as per specification. Nos. 3839.00 Eight hundred Thirty Nine

Supply, installation, testing and commissioning non-percolating rubber reinforced lined Fire Hose pipe (as per IS : 636)

of 63 mm dia and 1no.x15 mtrs long. The hose shall be rated for burst pressure of 38 kg/sqcm. Hose shall be complete Rupees Three Thousand

with ISI marked SS male & female coupling (IS:903) bound as per specification. Nine hundred Forty Five Only

Supply, Installation, Testing and commissioning of 63 mm dia instantaneous pattern SS short branch pipe, 20 mm dia Rupees One Thousand

294 RA 36.00 nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling complete as required by the Local Nos. 1778.00 Seven hundred Seventy Eight

Fire Authority. Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Supply, installation, testing and commissioning of First Aid Hose Reel conforming to IS:884 comprising of hose reel

drum, 8 mm shut off nozzle, hose reel tubing type-2 as per IS: 444 of 25 mm dia x 36 mtr. long, painting, fixed wall Rupees Eight Thousand One

type with fixing bracket, anchor fastener, bolts & nuts etc. complete as required by Local Fire Authority. hundred Thirty Five Only

Supply, installation, testing and commissioning of forged brass Ball Valve.

Rupees One Thousand One

hundred Thirty Three Only

Supply, Installation, Testing and Commissioning of 25mm Brass Sprinkler test and Drain Valve (300 PSI) assembly with

Rupees Five Thousand Six

297 RA 26.00 all required fittings as per drawing and as directed. Set 5671.00

hundred Seventy One Only

Supply, installation, testing and commissioning of Cast Iron Four Way Fire Brigade Inlet as per IS: 904 having 63 mm

Rupees Seven Thousand Six

298 RA 1.00 dia inlet with blank cap and chain with necessary fittings, flanges, nut bolts etc. complete as required. Nos. 7667.00

hundred Sixty Seven Only

Supply, installation, testing and commissioning of Cast Iron Two Way Fire Brigade Inlet as per IS: 904 having 63 mm Rupees Four Thousand

299 RA 1.00 dia inlet with blank cap and chain with necessary fittings, flanges, nut bolts etc. complete as required. Nos. 4759.00 Seven hundred Fifty Nine

Supply, Installation, Testing and Commissioning of Gun Metal Air Release Valve with necessary fittings. Size: 25 mm Rupees Two Thousand

(For Riser) Twenty Eight Only

Supply, Installation, Testing and commissioning of Quartzoid Bulb type Sprinkler Heads. Rupees Three hundred

a) Pendent Sprinkler 57°C - K-80 - standard response - UL listed Fourteen Only

b) Pendent Sprinkler with rossette plate 57°C - K-80 - standard response - UL listed Rupees Four hundred One

Supply, Installation, Testing and commissioning of Vane type Flow Indicating Switch with fittings, Flanges, nut-bolts,

Rupees Five Thousand Three

303 RA 3.00 washers etc. as per requirement. a)150mm dia. Nos. 5398.00

hundred Ninety Eight Only

Rupees Five Thousand Three

hundred Ninety Eight Only

Rupees Five Thousand Three

hundred Ninety Eight Only

Providing, fixing, testing & commissioning UL listed SS corrugated Unbraided Flexible pipe, nominal Inlet by outlet 1"x

Rupees Seven hundred

306 RA 655.00 ½" with required accessories to complete the installation. Nos. 773.00

Seventy Three Only

b) Size: 1000mm Rupees Eight hundred

Supply, installation, testing and commissioning of Pump on/off Remote switches to each internal hydrant valve with Rupees Six hundred Eighteen

required accessories. Only

Supply, installation, testing and commissioning of XLPE insulated Flexible Cable with conduit from each Pump on/off

Rupees Two hundred Thirty

309 RA 300.00 switches to Panel with all necessary accessories. Rmt. 236.00

Size: 4 core x 2.5 sq. mm

Supply, installation, testing and commissioning of Carbon Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm to

Rupees Four Thousand Five

310 RA 47.00 IS:15683, stored pressure, squeeze type with ISI marked fitted with required accessories including wall suspension Nos. 4579.00

hundred Seventy Nine Only

Supply, installation, testing and commissioning of ABC (MAP 50%) type 6 kg stored pressure, squeeze type confirm to

Rupees One Thousand Nine

311 RA 47.00 IS:15683, with ISI marked fitted with required accessories including wall suspension brackets. Nos. 1906.00

hundred Six Only

Supply and fixing of Clean Agent HCF236fa, 10 Kg modular type ceiling mounted Fire extinguisher , Stored pressure

Rupees Thirty One Thousand

312 RA 25.00 type with pressure gauge. Nos. 31355.00

Three hundred Fifty Five Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing, fixing AUTO GLOW photo luminescent Signage's as per IS standard in Block / Small Letters on rigid sheet Rupees Three hundred Thirty

313 RA 26.00 with necessary wall or Ceiling fittings as Specified Sizes:a) Fire Equipment : size: 100 x 300mm Nos. 335.00

Supply Of Self Contained Rechargeable SWGS Emergency Egress Routes Lighting With the 1X 3 W LED Lamp. The

equipment Shall Surface/hanging mounted with all require Accessories with requirement for the Fire and Safety code

of practice with 3 Hours backup. Nominal Input Voltage 230 +-10 % to 240V A.C. +-10 % 50 Hz +-10 % as specified in Rupees Three Thousand Two

specification. hundred Thirty Six Only

(Size:300 x 180mm)

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular

type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling Rupees Four hundred Eighty

as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. Five Paise Eighty One Only

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with Rupees Six hundred Seventy

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling Four Paise Sixty Eight Only

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III

Point wiring for Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete

with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden Rupees One hundred Sixty

box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp Seven Paise Sixty Six Only

holder / ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on

Rupees Five hundred Ten

318 1-2-3. 50.00 / in wall / ceiling as per pipe erected with following type of accessories. Ea. 510.05

Paise Five Only

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

Rupees Seven hundred Forty

319 1-2-3. 292.00 (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III Ea. 745.38

Five Paise Thirty Eight Only

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b Rupees Eight hundred

320 1-2-3. 25.00 board.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III Ea. 871.63 Seventy One Paise Sixty

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / Rupees Two hundred Fifty

321 1-2-4. 341.00 ceiling with following type accessories. Cat. III(f) with medium class Rigid PVC pipe and accessories erected concealed Ea. 257.55

Seven Paise Fifty Five Only

in wall/ceiling complete. Cat. III

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular

type switches and following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with Rupees Six hundred Three

necessary batten/angle holder or ceiling rose or H.D.Connector as directed. Paise Ninety Eight Only

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per

site situation directed by Engineer In charge. Rupees One hundred Sixty

(3) Two Pin/RJ-11 Telephone Socket Paise Fifty Nine Only

[A] For One Gang

(7) Blank Plate Single. Cat.III Rupees Twenty Five Paise

Twenty Five Only

(8) Computer RJ-45 socket . Cat.III Rupees One hundred Sixty

Paise Fifty Nine Only

(4) TV Co-axial Socket outlet Rupees One hundred Sixty

Paise Fifty Nine Only

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia Rupees Thirty Three Paise

327 1-3-2. 8000.00 of pipes, in approved manner as directed. Mtr. 33.33

Thirty Three Only

(c) 32 mm Rupees Fifty Four Paise Fifty

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. Rupees Twenty One Paise

329 1-3-4. 500.00 complete of following sizes.(2) 25 mm Mtr. 21.21

Twenty One Only

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with

ignition free and flame proof confirming BS with necessary end caps Internal and external bend, flat bends, coupler, Rupees Four hundred

330 1-3-6 40.00 tee etc..All necessary accessories and measuring of following sizes. Mtr. 428.24 Twenty Eight Paise Twenty

(2) 100 mm x 50 mm trunking Four Only

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following size. Rupees Sixty Two Paise Sixty

(A) With medium class Rigid PVC pipe and accessories. Two Only

(a) 2 wire 1.5 sq. mm

(b) 2 wire 2.5 sq. mm Rupees Eighty Two Paise

Eighty Two Only

(f) 4 wire 2.5 sq. mm

Rupees One hundred Twenty

Six Paise Twenty Five Only

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated Rupees One hundred Twelve

stranded wire of green colour for earth continuity of following size Paise Eleven Only

(a) 2 wire 4 sq. mm

(g) 4 wire 4 sq. mm

Rupees One hundred Eighty

Paise Seventy Nine Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

(h) 4 wire 6 sq. mm Rupees Two hundred Sixty

Paise Fifty Eight Only

(i) 4 wire 10 sq. mm(use earth wire of 4 sq.mm ) Rupees Four hundred

337 1-4-2. 360.00 Mtr. 425.21 Twenty Five Paise Twenty

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically Rupees One hundred Forty

for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts Two Paise Forty One Only

and bolts if required.(g) One wire 16.00 sq. mm

(h) One wire 25.00 sq. mm

Rupees Two hundred Thirty

Six Paise Thirty Four Only

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of

Rupees Thirty One Paise

340 1-4-5 200.00 following size to be erected as directed. Mtr. 31.31

Thirty One Only

(d) 1.50 Sq.mm 2 core round PVC sheathed

(e) 1.50 Sq.mm 3 core round PVC sheathed Rupees Forty Six Paise Forty

(h) 2.50 Sq.mm 3 core round PVC sheathed Rupees Seventy Seven Paise

Seventy Seven Only

(k) 4.00Sq.mm 4 core round PVC sheathed Rupees One hundred

343 1-4-5 200.00 Mtr. 176.75 Seventy Six Paise Seventy

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid

Rupees Thirty Nine Paise

344 1-4-6 350.00 bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ Mtr. 39.39

Thirty Nine Only

suitable coverage overall sheathed with black PVC insulation.(b) RG-6

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs,

& wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary

connections. Rupees Twenty Paise

[A] Conductor Size 0.5 mm Twenty Only

(b) Armoured [Jelly Filled](2) Twenty Pairs

Rupees One hundred Ninety

Nine Paise Ninety Eight Only

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with Rupees One Thousand Three

347 1-4-9 5.00 krone strips(b) Suitable for 20 pair Ea. 1368.55 hundred Sixty Eight Paise

Fifty Five Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt Auto

attendant facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP

program me through Analog telephone digital key from Ethernet, public address cord, shall have unrestricted

simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit dialing of any two external

number, Once only ring device, Chairman / Secretary - Do not disturb Facility, Power Down Mode, Hot Line, Hot Rupees One Lakh Seventy

348 7-1-2. 1.00 Outward Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing Ea. 174606.78 Four thousand Six hundred

with Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music Six Paise Seventy Eight Only

Port, Call Budgeting, Call Most Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Fax Homing,

Global Directory Printing with following capacities [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

[E] No of Extension 128, No of Junctions 24, No of expandable ports : 512, Operators Console - 01 Compatible : ISDN

Supplying & erecting push button type telephone instrument having speaker phone Caller ID & hands free dialing

system & 30 memories with display system Single line [[Approved by Competent Authority i.e. not Below the rank of Rupees Five hundred Sixty

Executive Engineer ] Five Paise Sixty Only

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction. Rupees Seventy Six Paise

[D] CAT - 6 e Seventy Six Only

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with Rupees Three Thousand

351 1-4-9 1.00 krone strips Ea. 3443.09 Four hundred Forty Three

(d) Suitable for 100 pair Paise Nine Only

Providing & Erecting 6 core fibre optic SM 9/125um double sheath, CSTA, Unitube, Outdoor cable (per m)

352 1-4-10 300.00 Mtr. 60.60 Rupees Sixty Paise Sixty Only

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections as directed Rupees One Thousand One

353 1-6-2 (B) 380.00 1 no. 6A/16A universal plug-switch combined. Ea. 1133.22 hundred Thirty Three Paise

3 nos. 6A Switch Twenty Two Only

3 nos. 6A 5 pin Plug

For Modular Type Accessories. Cat. III

Supplying & erecting Approved make call bell indicator with buzzing sound and Red light indicating lamp with Red light

Rupees One hundred Forty

354 1-6-9. 20.00 button to attend the call suitable for 240 v 50 c/s supply to be erected. Ea. 148.47

Eight Paise Forty Seven Only

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and

Rupees One hundred Twelve

355 3-10-1.(B) 680.00 having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III Ea. 112.11

Paise Eleven Only

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking

Rupees Two hundred Ninety

356 3-10-2. 10.00 capacity & confirms to IS : 8828 in existing box having following capacity Ea. 299.97

Nine Paise Ninety Seven Only

(A) 6 to 32 Amp. CAT.III

(B) 40 Amp. CAT.III

Rupees Three hundred Thirty

Paise Twenty Seven Only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity &

Rupees Five hundred Ninety

358 3-10-5. 17.00 confirms to IS :8828 in existing box having following capacity Ea. 595.90

Five Paise Ninety Only

(a) 6 to 32 Amp. Cat.III

(b)40 Amp. Cat.III Rupees Six hundred Sixty

Eight Paise Sixty Two Only

(c)63 Amp. CAT.III

Rupees Seven hundred Thirty

Seven Paise Thirty Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

Rupees One Thousand Four

(A) single phase incoming and horizontal single phase outgoing

361 3-11-5. 5.00 Ea. 1492.78 hundred Ninety Two Paise

(b) sheet steel double door

Seventy Eight Only

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) Rupees Two Thousand Nine

362 3-11-5. 2.00 (b) sheet steel double door Ea. 2913.85 hundred Thirteen Paise

(ii)6 way Eighty Five Only

(iii)8 way Rupees Three Thousand

363 3-11-5. 12.00 Ea. 3412.79 Four hundred Twelve Paise

Seventy Nine Only

(iv)12 way Rupees Three Thousand

364 3-11-5. 12.00 Ea. 3874.36 Eight hundred Seventy Four

Paise Thirty Six Only

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted

double door (IP54) fitted with copper insulated busbar, isolated neutral bar, earth bar and DIN rail, Conforms to IS

Rupees Six Thousand Four

8623-1 & 3, IEC 61439-1 & 3, suitable for 63/100 AMP TPN MCCB + RCCB as incomer and three phase outgoing as

365 3-11-10 2.00 Ea. 6497.33 hundred Ninety Seven Paise

per following .(The DBs should be used of same company of MCB to be used)

Thirty Three Only

(B)6 way outgoing

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of Rupees Two Thousand Two

366 3-12-1. 83.00 quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. Ea. 2235.13 hundred Thirty Five Paise

rating erected as directed. Thirteen Only

(ii) 40Amps. DP Cat. III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Rupees One hundred Sixty

367 2-15-1 69.00 Luminaire efficacy> 85 lumens/watt ,LED Ea. 165.64

Five Paise Sixty Four Only

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)(A) Tube Light with

integral driver(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet Cat-III

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Rupees Three hundred

368 2-15-1 10.00 Ea. 373.70 Seventy Three Paise Seventy

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

Rupees Five hundred Thirty

Five Paise Thirty Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure

die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , Rupees Seven hundred Fifty

LED driver efficiency > 85 % Eight Paise Fifty One Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips

(iv) 22-24 watts, Surge-2 KV Cat-III

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20

Rupees One Thousand

(vi) 36 watts, 24" x 24", Surge- 2KV

371 2-15-3. 318.00 Ea. 1794.77 Seven hundred Ninety Four

Paise Seventy Seven Only

Providing and erecting PVC body surface or pendent mounting LED Bulk type 9 watt Lighting Fitting with electronic

Rupees Seven hundred

driver. And lumen output from luminaire 720lm , input voltage range 90-300VAC , 50Hz cool white(3000 to 6500k),

372 2-17-3 57.00 Ea. 787.80 Eighty Seven Paise Eighty

inbuilt driver, -20degC to +60degC working temperature, AL frame with Beam Angle 120deg

Supplying and Erecting Of L.E.D. type High bay fixture having Power Consumption of following watts with, Input

Voltage 110 - 290 V.AC with full efficiency, Power Factor > 0.9 with 50/60 HZ, CCVC LED Driver used for maximum Rupees Five Thousand Two

373 2-17-4 35.00 power saving, Best Quality Aluminium alloy housing and aluminium Dome for better heat dissipation, CCT Cool white Ea. 5256.04 hundred Fifty Six Paise Four

(6000K), CRI 80, Beam angle > 120 degrees, working temperature -20 deg c to +55 deg c, Body IP 65(A) 70 to 90 watts Only

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with Rupees One Thousand Nine

374 5-1-6. 350.00 Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , canopy & 30 Ea. 1948.29 hundred Forty Eight Paise

cm. down rod erected with earthing.(Make shall be approved by Engineer in charge)) Twenty Nine Only

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan Rupees One hundred Eight

complete with proper insulation without leakage and earthing. Paise Seven Only

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary Rupees One hundred Eight

finishing. Paise Seven Only

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Rupees Eighteen Paise

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt Rupees One Thousand

378 5-3-3. 45.00 lowers & square frame. 200mm with 1350RPM Cat.II Cat.II Ea. 1703.87 Seven hundred Three Paise

Eighty Seven Only

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low

noise operation suitable for medium duty having following dia size and maximum speed in RPM Rupees Two Thousand Fifty

Four Paise Thirty Four Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid

Rupees Two hundred Twenty

380 4-3-3. 645.00 on wall with necessary clamps or in existing trench / pipe of following size of cables. Mtr. 220.18

Paise Eighteen Only

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Rupees Two hundred Eighty

Four Paise Eighty Two Only

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Rupees Five hundred Forty

Paise Thirty Five Only

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

Rupees Seven hundred Thirty

One Paise Twenty Four Only

(I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core) Rupees Nine hundred Four

Paise Ninety Six Only

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. Rupees One hundred Forty

Paise Thirty Nine Only

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid

Rupees One hundred Fifty

386 4-3-5. 1500.00 on wall with necessary clamps or in existing trench / pipe of following size of cables. Mtr. 153.52

Three Paise Fifty Two Only

(A) 4 core 16 Sq. mm

(B) 4 core 25 Sq. mm

Rupees One hundred Ninety

Paise Eighty Nine Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. Rupees Nine hundred Eighty

388 4-4-5. 100.00 (B) 4 core 16 Sq. mm Mtr. 987.78 Seven Paise Seventy Eight

(B) 4 core 25 Sq. mm Rupees One Thousand Five

389 4-4-5. 200.00 Mtr. 1504.90 hundred Four Paise Ninety

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and Rupees Fifty Five Paise Fifty

back filling the same and making the surface as normal ground. Five Only

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or

Rupees Seventy Four Paise

391 4-5-2. 50.00 locating the fault all over the run and back filling the same and making the surface as normal ground. Mtr. 74.74

Seventy Four Only

(B) If additional machinery like hammer driller or JCB use [Add]

Rupees Three hundred Fifty

Seven Paise Fifty Four Only

Providing and erecting iron clad cable route marker duly marked with ELE.CABLE of size 23 cm.X 12 cm. Flushed with

Rupees Two hundred Forty

393 4-5-5. 50.00 ground in cement foundation as directed by Engineer in charge. Ea. 240.38

Paise Thirty Eight Only

Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with

Rupees One hundred Forty

394 4-5-3. 150.00 covering of 7. 5 Cm. layer of sand above & below cable (16 bricks per meter) Mtr. 140.39

Paise Thirty Nine Only

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II

Rupees Ninety Five Paise

395 4-5-8. 150.00 )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. Mtr. 95.95

Ninety Five Only

below ground / road surface for enclosing cable (C))90 mm outer dia

(D)120 mm outer dia.

Rupees One hundred Thirty

Seven Paise Thirty Six Only

Sr. N.B.O. No. Net Total Tendered Rates ( SOR 2024 - 25 )

Item Description Unit Amount

No. SOR Quantity Rate In Words

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

Rupees Thirty Three Paise

397 4-6-1. 20.00 complete with out going tails, insulating tape etc for following size of cables. Ea. 33.33

Thirty Three Only

(A) 2 to 4 core 2.5 / 4 Sq. mm

(B) 2 to 4 core 6 Sq. mm Rupees Thirty Eight Paise

Thirty Eight Only

(C) 2 to 4 core 10 Sq. mm Rupees Thirty Eight Paise

Thirty Eight Only

(D) 2 to 4 core 16 Sq. mm Rupees Forty Seven Paise

Forty Seven Only

(E) 2 to 4 core 25 Sq. mm Rupees Fifty One Paise Fifty

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Rupees Seventy Five Paise

(B) 3 & 1/2 core 35/50 Sq. mm Seventy Five Only

(E) 3 & 1/2 core 120 Sq. mm