RENOVATION OF TALUKA PANCHAYAT BUILDING AT VILLAGE KAPARADA TA: KAPARADA ,DIST: VALSAD. (Re-invite)

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

1 Dismentling doors, windows, ventilators etc. (wood 36.00 EACH 187.70

orsteel) shutters including chowkhats architraves,holdfasts

and other attachment etc. complete and stacking them

within all lead and lift.(i) Not exceeding 3Sq.M. in area.

2 Dismantling santtary fittings like wash basin . W.C. 8.00 EACH 405.84

panIndian and European type, flushing tank etc. including

stacking the materials with all lead and lift.

3 Providing and laying polished Granite Slab 18mm thick in 59.50 SMT. 2408.85

Risers of steps Dedo, window sill, jembs and pillars laid

10 mm thick Cement Mortar 1:4 (1-Cement : 4-Coarse

Sand) and jointed with Grey Cement Slurry including full

molded round edges , rubbing an

4 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' 416.50 SMT. 1275.12

x 24'' in flooring treads of steps and landing laid on a bed

of 8 to 10mm thick Adhesive finishing with flush pointing

in white cement.Soluble Salt PVT. Tiles in All Rooms.

5 Providing and laying white glazed tiles 6mm thick in 50.50 SMT. 1073.90

skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry

6 Providing and fixing 37 mm thick flush door both sides 8.50 SMT. 3737.00

laminated andshutter fabricated from 35 mm thick solid

core malemine faced three layered pre laminated flat

pressed wood based exterior grade bonded BWP/BWR

synthetic resin having stamped IS 12823 gra

7 Providing and fixing FRP frame size 125x65 mm and 20.16 SMT. 2615.04

35mm thick FRP shutter having extra reinforcement on

sides & edges in polish finish. The core of the shutter &

frame is to be filed up with injected polyurethene foam

done in situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The whole FRP

frame & shutter is to be water proof weather proof, termite

proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with necessary screws &

alluminium S.S fixtures & fastenings & fastener sleeve.

8 Providing and fixing standared extruded of alluminium 14.40 SMT. 1524.99

section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg /

Rmt with colour anodized alluminium frame with 5 mm

thick transparent bronze colour tinted float glass as details

etc complete for Fix window.

9 Providing and fixing standared extruded of alluminium 4.50 SMT. 1175.55

section of size 63mm x 38.10mm x 1.2mm (Wt.

Kg/mt) with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

10 Providing and fixing M.S. grill of required pattern of 280.80 Kg. 111.60

windows etc. with M.S.. flats at required spacing and

frame alround square or round headed bolts and nuts or by

screws.including applying a priming coat of red lead paint

and two coats of oil painting

11 Applying two coats of Birla (white cement based) or 138.00 SMT. 161.45

(acrylic lapy- putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth. with Wall painting (three coats)

with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

12 Applying two coats of Birla (white cement based) or 94.50 SMT. 166.87

(acrylic lapy- putty) or equivalent & two coats of primer of

approved brand and manufacture on new Ceiling surface

to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth. Ceiling painting (three coats)

with plastic emulsion paint of approved brand and

manufacture on undecorated Ceiling surface to give an

even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand

papered smooth.

13 Providing and fixing water closet squatting Pan 4.00 No 940.13

(Indiantype W.C. Pan) size 580mm (Earthwork, bed

concrete,foot reste and trap to be measured and paid

forseparately) (A) Vitreous China.(I) Long pattern =

Whitecolour

14 Providing and fixing washbasin with single hole for pillar 4.00 No 2384.71

tap with C.I. or M.S. brackets painted white including

sutting holes and making good the Providing and fixing

C.P. brass waste for washbasin or sink. (A)

32mmdia.,Providing and fixing pillar tap,

15 Providing and fixing PVC SWR Nahni trap IS 14735 for 4.00 No 571.08

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making

good the walls.

16 Providing and fixing screw down bib taps of following 6.00 No 186.82

size.(A) Brass screw down bib tap polished bright. (i)

17 Providing and fixing 600mm x 450mm bevelled edge 4.00 No 833.73

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

18 Providing and fixing Gun metal check or non-return 2.00 No 420.63

fullway wheel valve. 25mm. dia.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

19 Providing and fixing chromium plated brass half turn flush 4.00 No 263.77

cock of approved quality including fixing in pipe line etc.

complete.(ii) 25mm dia.

20 Providing and fixing ball cock of approved. quality as 1.00 No 132.88

directed.(A) Copper Metal (A) 25mm. dia.

21 Providing laying and jointing in true line and level 15mm 9.00 RMT. 72.64

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials.

22 Providing laying and jointing in true line and level 25mm 30.00 RMT. 91.83

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials.

23 Providing, laying and jointing in true line and level 110 19.00 RMT. 836.73

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size 110 mm diametre

x 149 mm length x 145 mm heigh at every 2000 mm center

to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

24 Providing and fixing S.W. gully trap with C.I. grating brick 1.00 No 1246.91

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

25 Constructing Brick masonry road gully chamber 500mm x 1.00 No. 2017.19

450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

26 Constructing brick masonry chamber for underground C.I. 2.00 No 2932.92

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover

with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand

:4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

27 Providing laying (to level or slopes) and jointing 10.00 RMT. 665.47

reinforced concrete Light duty non-pressure pipes I.S. class

NP2 of the following internal diameter with collars and

butt ends prepared for collar joints including testing of

joints complete.(D) 300 mm di

Rupees Fifteen Lakh TwentyOne Thousand Six Hundred SeventyFive Paise ThirtyTwo Only

SHEDULE B Page