Construction of Boundarywall devlopement of vehicle parking space and provision for peripherial development of NAC Office building

Dismantling brick or stone masonry in lime or cement mortar under 3mt height including stacking the useful materials for reuse and removing the debris within 50mt lead including labour charges etc complete.

Engage Mechanisms of charges per hour for Clearing and grubbing(C&G) done in excess of 150 mm by the Contractor shall be made good by the Contractor at his own cost to the satisfaction of the Engineer prior to taking up earthwork. Where clearing and grubbing is to be done to a level beyond 150 mm, due to site considerations, as directed by the EngineerAll trees, stumps, etc., falling within excavation and fill lines shall be cut to such depth below ground level that in no case these fall within 500 mm of the bottom of the subgrade to finishing and leveling the mother earth as per direction of the Junioe engineer .Cutting Coconut Tree and Other tree Trimming . Mechanisms of charges per hour Rate

Engaged High skilled Labour

Engage Labour for remove debries and cleaning all the material to be finising purpose the Site as per the direction of Junior engineer.

Earth work in filling in all kinds of soil including dressing and levelling the bed breaking the clods to 5 to 7 cm and laying in layers not exceeding 0.30 mtr in depth by bringing the earths from with in 5 km area as directed by the EIC.

Earth work excavation in foundation in all kind of soil with in initial lead and initial lift including dressing and levelling the bed and depositing the soil away from the the work site including labour etc complete.

Providing supplying, filling in foundation and plinth with sand including watering and ramining with cost, conveyance, royalty, taxes of all materials with all labour, T&P etc., complete.

Cement concrete of proportion (1:4:8) in F&F using 40mm size hbg metal of approved quality including cost, conveyance, taxes & royality of all materials and labour with T&P et. Complete in all respect.

C.C (1:2:4) using 12mm size hard granite crusher broken chips including cost of materials, labour, lead, royalty, well watering and curing etc complete.

Supplying fiting and fixing of precoated Galvalume iron profile sheet semi gloss of 1000 mm width and total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc complete including cost of sheet and all fittings etc complete.

Iron works wrought and put up of trusses and purlin including fabrication and all cost G.I Pipe 40mm dia. Including fitting and fixing of labour charges. 100X100X4mm

C.C (1:3:6) with broken hard granite crusher broken metal including cost, conveyance, labour , well watering and curing etc complete.

Providing, laying, spreading and compacting graded stone aggregate to with Wet Mix macadam .specification including premixing the material with water at OMC in mechanical mix plant , carriage of mixed material by tipper to site, laying and spreading in uniform layers with paver in sub base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (4th Revision) including all cost, conveyance, taxes of all materials and labour etc all complete as per the required specification and the direction of the Engineer-in- Charge

Supplying all materials, labour and T&P for laying, fitting & fixing 60mm thick Cement Concrete inter locking paver blocks of M 30 grade of approved make, design, colour and size made by block making machine with proper compaction by mechanical means , cutting of paver blocks as per required size and pattern and laying the blocks in required pattern over the prepared hard base surface , finishing and sweeping extra sand in pathway including all cost, conveyance, taxes, royalities of all materials and T&P etc all complte confirming to IRC:SP-63:2018 and its ammendments if any etc all complete as per the specifications and directions of the Engineeer-in- Charge.

Providing Fixing of Granite tiles on column of premium rade having thickness above 0.40sqm(20mm thick) confirming to IS 13755 of size 30cm X 30cm special plain / printed series of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.

R.C.C. work M-25 grade with 20mm and down grade black hard granite crusher broken stone chips inclding hoisting and laying and T &P, Labour, Materials Roylity etc. complete.

Providing M.S reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge.

Fly ash bricks of 23 Cm. X 12 Cm. X 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with cement mortar (1:6) in Foundation and Plinth including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, taxes & royalities of all materials, labour with T&P etc. complete in all respect.

12mm thick cement plaster in cm (1:6) finished smooth to brick masonry including racking cut joints with watering, curing, cost, conveyance, taxes, royalities, labour with T&P etc. complete in all respect.

Providing One no of G.I gate Fitting and fixing and position including labour for loading and unloading as per Local market rate.

For Photograph and sign board unforseen items etc.