Provision of Lift at HCR, OMLF, AZR, BNDP, GRMP, PRNA, RGJ and KIR Stations in Connections with Development of FOBs along with Other Anciliary Works under Katihar Division

Item- 1 Please see in item Breakup

S No. Item Description of Item Unit Qty Rate Amount

KATIHAR DIVISION-ELECTRICAL/N F RLY

1 1 Supply, wiring, testing & commissioning of Numbers 220.00 797.00 175340.00

concealed point wiring by FR PVC insulated and

unsheathed 1.5 sq mm, single core multi strand

copper wire with earth continuity wire by PVC

insulated and unsheathed 1 sq mm , single core

multi strand copper wire concealed on wall

through PVC rigid conduit pipe of dia not less

than 20 mm dia heavy duty including all types of

joints and bends as required, complete with 6

amps flush type controlling modular switch to be

mounted on modular GI inner plate and modular

mounting frame of suitable module as per

requirement complete to be concealed in wall as

per instruction of Engineer Incharge at site.

Existing wall should be cut and re-mended to

original finish by contractor's own material. a) FL

Point/LED Tube Point/LED Recess Light Point with

2 2 b) Lamp Point with angle holder Numbers 32.00 704.00 22528.00

3 3 Supply, wiring, testing & commissioning of Numbers 100.00 737.00 73700.00

concealed plug point on separate board complete

with 2 x 6 Amp modular socket and 6/10 amps

modular switch to be mounted on modular GI

inner plate 6M and 6M modular mounting frame

with GI box to be concealed in wall as per

instruction of Engineer Incharge at site. Existing

wall should be cut and re-mended to original

finish by contractor's own material.

4 4 Supply, wiring, testing & commissioning of Numbers 60.00 855.00 51300.00

concealed 6/16 amps power plug point on

separate board complete with modular 16 amps

switch (with indicator) and 6/16 amps 3 pin

combined shuttered socket to be mounted on

modular GI inner plate 4M or suitable size with

modular mounting frame to be concealed in wall

as per instruction of Engineer Incharge at Site.

5 5 Supply, fixing, connection & testing of 40 Watt Numbers 100.00 1890.00 189000.00

LED Tubelight, Surface/ Pendent mounting LED

Battens in Extruded aluminium housing as per

instruction of Engineer Incharge at Site.

6 6 Supply, installation, testing & commissioning of Numbers 120.00 1614.00 193680.00

15 Watt Recess mounted downlighter with

pressure die-cast aluminium heat sink & PC

diffuser with integrated driver as per instruction

of Engineer Incharge at Site. (Round Type)

7 7 Supply, fixing & testing and commissioning of Numbers 32.00 670.00 21440.00

LED 12 W B22 CDL INVERTER BULB V2 as per

instruction of Engineer Incharge at Site.

8 8 Supply, wiring & testing of main wire by 2.5 sq Metre 4000.00 75.00 300000.00

mm, Single Core FR-LSH PVC Insulated Industrial

Grade Copper Conductor (Unsheathed) Flexible

Cables, 1100 Volts and earth continuity wire by

1.0 sq mm FR-LSH PVC Insulated Industrial Grade

Copper Conductor Conforming to IS: 694

concealed in wall through PVC rigid conduit pipe

not less than 20 mm dia as per instruction of

Engineer incharge at site.

9 9 Supply, wiring & testing of main wire by 4 sq mm, Metre 3000.00 87.00 261000.00

Single Core FR-LSH PVC Insulated Industrial Grade

Copper Conductor (Unsheathed) Flexible Cables,

1100 Volts and earth continuity wire by 1.0 sq

mm FR-LSH PVC Insulated Industrial Grade

Copper Conductor Conforming to IS: 694

concealed in wall through PVC rigid conduit pipe

not less than 20 mm dia as per instruction of

Engineer incharge at site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

10 10 Supply, wiring & testing of main wire by 6 sq mm, Metre 2000.00 100.00 200000.00

Single Core FR-LSH PVC Insulated Industrial Grade

Copper Conductor (Unsheathed) Flexible Cables,

1100 Volts and earth continuity wire by 1.0 sq

mm FR-LSH PVC Insulated Industrial Grade

Copper Conductor Conforming to IS: 694 through

PVC rigid conduit pipe/polythene pipe not less

than 20 mm dia as per instruction of Engineer

incharge at site.

11 11 Supply, installation, testing & commissioning of Numbers 160.00 1265.00 202400.00

10 watt LED Bulkhead luminaires, IP65 as per

instruction of Engineer incharge at site.

12 12 Supply, installation, testing & commissioning of Numbers 25.00 18420.00 460500.00

200 watt LED flood light luminaires complete with

pressure die cast aluminium housing, IP 66,

Luminous efficacy 120 lm/watt with heat sink

feature, surge protection etc including wire

connection as per instruction of Engineer

incharge at site.

13 13 Supply, installation, testing & commissioning of Metre 150.00 1561.00 234150.00

Hot Dipped Galvanized Wire Mesh Cable Tray of

size (Depth- 54 x Width- 150) mm, made of

carbon steel (ASTM A510, Grade-1008 specified)

finished by electrozinc plating (ASTM B 633

specified) alongwith all accessories like suitable

type of splices, locking tab, divider coupler,

preclick, SWK, clamp, Tee, bend, bracket, nut,

bolts etc. Trays should comply standard EN ISO

1461: atleast 550 h of SST. Assemblies with

specific fire resistant properties must have an

E30-E90 certificate. Rod-dia must be from 3.9

mm to 5.9 mm or higher and as per site site

requirement and as per instruction of engineer

incharge at site.

14 14 Design, manufacture, display of wall /hanging / Square 300.00 2868.00 860400.00

floor mounting type LED illuminated sign / Foot

direction boards in half elliptical shape. The

display sheet shall be of unbreakable 040

translucent polycarbonate sheet of 2 mm

thickness. The text / graphics matter visibility

shall not be less than 160 deg. The approved

colour text and graphics shall be printed / router

cut on monomeric calendered vinyl of 70 mm

thickness and shall be firmly pasted on display

sheets. The mounting arrangement shall be

hanging, wall mounting, ceiling mounting, pole

mounting or floor mounting and as per site

requirement. The signage shall have the integral

mounting arrangements with sturdy structural

frame and ACP cladding on the back side of the

signage to avoid rusting and entry of dust. The

LED board shall have uniform illumination with 4-

8 W / sq. ft and with brightness more than

ambient light. Suitable size end cap of 1.5 mm

thick SS 304 should be provided. (Signage Board

should as per Railway Board Letter No. 2023/SD-

KATIHAR DIVISION-ELECTRICAL/N F RLY

15 15 Erection and installation of wall / hanging / floor Square 300.00 287.00 86100.00

mounting type LED illuminated sign / direction Foot

boards in half elliptical shape. The display sheet

shall be of unbreakable 040 translucent

polycarbonate sheet of 2 mm thickness. The

text/graphics matter visibility shall not be less

than 160 deg. The approved colour text and

graphics shall be printed / router cut on

monomeric calendered vinyl of 70 mm thickness

and shall be firmly pasted on display sheets. The

mounting arrangement shall be hanging, wall

mounting, ceiling mounting, pole mounting or

floor mounting and as per site requirement. The

signage shall have the integral mounting

arrangements with sturdy structural frame and

ACP cladding on the back side of the signage to

avoid rusting and entry of dust. The LED board

shall have uniform illumination with 4-8 W / sq. ft

and with brightness more than ambient light.

Suitable size end cap of 1.5 mm thick SS 304

should be provided. (Signage Board should as per

Railway Board Letter No. 2023/SD-II/22/07/02

16 16 Supply, laying, commissioning & testing of GI pipe Metre 1600.00 850.00 1360000.00

100 mm medium guage with suitable fixing

arrangement by MS clamp of size 50x6 mm and

suitable size nut, bolt etc. (For protection of

cable) as per instruction of Engineer incharge at

17 17 Supply, laying, commissioning & testing of HDPE Metre 1600.00 70.00 112000.00

pipe 50 mm dia, PN-6 grade to be laid partly

along the p o l e / w a l l with suitable fixing

arrangement by MS clamp made of MS flat of size

50x6 mm and suitable size nut , bolt, washer etc

as per instruction of Engineer Incharge at site.

18 18 Supply & Erection of earth by 50 mm dia 3 Mtrs. Numbers 32.00 4349.00 139168.00

long (3.6 mm thickness) GI pipe, 32x6 mm GI

strip- 5 Mtrs, GI nuts, bolts including masonry

materials for earthing pit, salt, charcoal, soldered

end terminal etc. and construction of earth pit

covered with RCC cover slab12.7 mm thickness

and watering pipe as per Drg. No.-

PCEE/ELG/DRG/2024/1 Date:- 30.09.2024 and as

per instruction of Engineer Incharge at site.

19 19 Supply, fixing, testing & commissioning of 20 Set 48.00 2724.00 130752.00

amp Industrial plug & socket DB (CRCA/SS made)

complete with metal Plug, socket (3P) & MCB DP

20 amp. as per instruction of Engineer Incharge

20 20 Supply, fixing, testing & commissioning of 63 Set 16.00 9912.00 158592.00

amp Industrial plug & socket DB (CRCA/SS made)

complete with metal Plug, socket (3P/5P) & MCB

DP 63 amp. as per instruction of Engineer

Incharge at Site.

21 21 a) Supply, installation, testing & commissioning of Set 16.00 2005.00 32080.00

12 way SPN Distribution Board, Flush/Surface

mounting, IP 43 grade protection with copper bus

bar, fully shrouded neutral bar, earth bar, cable

ties, metal double door as per IS 8623 - III with

supply and fixing of following RCBO/MCB's as per

instruction of Engineer Incharge at Site.

conforms to IS/IEC 60898:2002

Conforms to IS/IEC 60898 - 1:2002

Conforms to IS/IEC 60898 - 1:2002

KATIHAR DIVISION-ELECTRICAL/N F RLY

25 25 a) Supply, fabrication, erection, testing, Set 8.00 32916.00 263328.00

commissioning & painting of floor mounted

powder coated cubicle panel board (Modular look)

of suitable size (neither big nor small) ), outdoor

type with double door made of suitable size MS/GI

angle 50 x 50 x 6 mm, MS/GI flat 50 x 6 mm, 14

SWG MS sheet/Powder coated CRCA sheet with

provision of weather proof,rust proof,dust

proof,water proof having internal rubber gasket

with supply and fixing of following ACB/MCCB/Bus

bar/Meter etc. (Connections to be made by

copper strips, glands should be provided at cable

entry and exit, components should be

compartmentalized, Each compartment will be

provided with the door and pad locking

arrangement. The compartment illumination lamp

with door operated switch shall be provided for

each compartment. Panel board drawing

approval must be obtained with clear indication

of make of items of components):-

28 28 d) Copper bus bar 100 amps made of electrolytic Set 8.00 900.00 7200.00

grade copper consisting of 4 bars ( 3 Ph and

Neutral ) ( Bus bar should have insulation cover)

ammeter (0-500) amps with s/switch and CTs

31 31 Laying, commissioning & testing of HT/LT Metre 4000.00 55.00 220000.00

XLPE/PVC cable of different sizes partly along the

pole and partly through ground in cable trench by

excavation of ground below 1.5 mt from ground

level with suitable fixing arrangement by MS

clamp of size 50x6 mm and suitable size nut,

bolt. Loading, Unloading & Carrying of cable to

actual work site by contractor's own

arrangement. (Aluminium Crimping Socket should

be provided for each Cable Termination). (Cable

will be supplied by Railway)

32 32 Cutting of Road/Pucca/Hard Soil below (0.3 x 1) Metre 3200.00 298.00 953600.00

mt from ground level and make it good as original

with supply & execution of CC work (1:3:6) as per

instruction of Engineer incharge at site.

Schedule Schedule 2-PART-B (Under Jurisdiction of SSE/Elect./P/IC/BOE) (Station - AZR & RGJ)

Item- 1 Please see the item breakup

S No. Item Description of Item Unit Qty Rate Amount

1 1 Supply, wiring, testing & commissioning of Numbers 110.00 797.00 87670.00

concealed point wiring by FR PVC insulated and

unsheathed 1.5 sq mm, single core multi strand

copper wire with earth continuity wire by PVC

insulated and unsheathed 1 sq mm , single core

multi strand copper wire concealed on wall

through PVC rigid conduit pipe of dia not less

than 20 mm dia heavy duty including all types of

joints and bends as required, complete with 6

amps flush type controlling modular switch to be

mounted on modular GI inner plate and modular

mounting frame of suitable module as per

requirement complete to be concealed in wall as

per instruction of Engineer Incharge at site.

Existing wall should be cut and re-mended to

original finish by contractor's own material. a) FL

Point/LED Tube Point/LED Recess Light Point with

KATIHAR DIVISION-ELECTRICAL/N F RLY

3 3 Supply, wiring, testing & commissioning of Numbers 50.00 737.00 36850.00

concealed plug point on separate board complete

with 2 x 6 Amp modular socket and 6/10 amps

modular switch to be mounted on modular GI

inner plate 6M and 6M modular mounting frame

with GI box to be concealed in wall as per

instruction of Engineer Incharge at site. Existing

wall should be cut and re-mended to original

finish by contractor's own material.

4 4 Supply, wiring, testing & commissioning of Numbers 30.00 855.00 25650.00

concealed 6/16 amps power plug point on

separate board complete with modular 16 amps

switch (with indicator) and 6/16 amps 3 pin

combined shuttered socket to be mounted on

modular GI inner plate 4M or suitable size with

modular mounting frame to be concealed in wall

as per instruction of Engineer Incharge at Site.

5 5 Supply, fixing, connection & testing of 40 Watt Numbers 50.00 1890.00 94500.00

LED Tubelight, Surface/ Pendent mounting LED

Battens in Extruded aluminium housing as per

instruction of Engineer Incharge at Site.

6 6 Supply, installation, testing & commissioning of Numbers 60.00 1614.00 96840.00

15 Watt Recess mounted downlighter with

pressure die-cast aluminium heat sink & PC

diffuser with integrated driver as per instruction

of Engineer Incharge at Site. (Round Type)

7 7 Supply, fixing & testing and commissioning of Numbers 16.00 670.00 10720.00

LED 12 W B22 CDL INVERTER BULB V2 as per

instruction of Engineer Incharge at Site.

8 8 Supply, wiring & testing of main wire by 2.5 sq Metre 2000.00 75.00 150000.00

mm, Single Core FR-LSH PVC Insulated Industrial

Grade Copper Conductor (Unsheathed) Flexible

Cables, 1100 Volts and earth continuity wire by

1.0 sq mm FR-LSH PVC Insulated Industrial Grade

Copper Conductor Conforming to IS: 694

concealed in wall through PVC rigid conduit pipe

not less than 20 mm dia as per instruction of

Engineer incharge at site.

9 9 Supply, wiring & testing of main wire by 4 sq mm, Metre 1500.00 87.00 130500.00

Single Core FR-LSH PVC Insulated Industrial Grade

Copper Conductor (Unsheathed) Flexible Cables,

1100 Volts and earth continuity wire by 1.0 sq

mm FR-LSH PVC Insulated Industrial Grade

Copper Conductor Conforming to IS: 694

concealed in wall through PVC rigid conduit pipe

not less than 20 mm dia as per instruction of

Engineer incharge at site.

10 10 Supply, wiring & testing of main wire by 6 sq mm, Metre 1000.00 100.00 100000.00

Single Core FR-LSH PVC Insulated Industrial Grade

Copper Conductor (Unsheathed) Flexible Cables,

1100 Volts and earth continuity wire by 1.0 sq

mm FR-LSH PVC Insulated Industrial Grade

Copper Conductor Conforming to IS: 694 through

PVC rigid conduit pipe/polythene pipe not less

than 20 mm dia as per instruction of Engineer

incharge at site.

11 11 Supply, installation, testing & commissioning of Numbers 80.00 1265.00 101200.00

10 watt LED Bulkhead luminaires, IP65 as per

instruction of Engineer incharge at site.

12 12 Supply, installation, testing & commissioning of Numbers 25.00 18420.00 460500.00

200 watt LED flood light luminaires complete with

pressure die cast aluminium housing, IP 66,

Luminous efficacy 120 lm/watt with heat sink

feature, surge protection etc including wire

connection as per instruction of Engineer

incharge at site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

13 13 Supply, installation, testing & commissioning of Metre 150.00 1561.00 234150.00

Hot Dipped Galvanized Wire Mesh Cable Tray of

size (Depth- 54 x Width- 150) mm, made of

carbon steel (ASTM A510, Grade-1008 specified)

finished by electrozinc plating (ASTM B 633

specified) alongwith all accessories like suitable

type of splices, locking tab, divider coupler,

preclick, SWK, clamp, Tee, bend, bracket, nut,

bolts etc. Trays should comply standard EN ISO

1461: atleast 550 h of SST. Assemblies with

specific fire resistant properties must have an

E30-E90 certificate. Rod-dia must be from 3.9

mm to 5.9 mm or higher and as per site site

requirement and as per instruction of engineer

incharge at site.

14 14 Design, manufacture, display of wall /hanging / Square 300.00 2868.00 860400.00

floor mounting type LED illuminated sign / Foot

direction boards in half elliptical shape. The

display sheet shall be of unbreakable 040

translucent polycarbonate sheet of 2 mm

thickness. The text / graphics matter visibility

shall not be less than 160 deg. The approved

colour text and graphics shall be printed / router

cut on monomeric calendered vinyl of 70 mm

thickness and shall be firmly pasted on display

sheets. The mounting arrangement shall be

hanging, wall mounting, ceiling mounting, pole

mounting or floor mounting and as per site

requirement. The signage shall have the integral

mounting arrangements with sturdy structural

frame and ACP cladding on the back side of the

signage to avoid rusting and entry of dust. The

LED board shall have uniform illumination with 4-

8 W / sq. ft and with brightness more than

ambient light. Suitable size end cap of 1.5 mm

thick SS 304 should be provided. (Signage Board

should as per Railway Board Letter No. 2023/SD-

15 15 Erection and installation of wall / hanging / floor Square 300.00 287.00 86100.00

mounting type LED illuminated sign / direction Foot

boards in half elliptical shape. The display sheet

shall be of unbreakable 040 translucent

polycarbonate sheet of 2 mm thickness. The

text/graphics matter visibility shall not be less

than 160 deg. The approved colour text and

graphics shall be printed / router cut on

monomeric calendered vinyl of 70 mm thickness

and shall be firmly pasted on display sheets. The

mounting arrangement shall be hanging, wall

mounting, ceiling mounting, pole mounting or

floor mounting and as per site requirement. The

signage shall have the integral mounting

arrangements with sturdy structural frame and

ACP cladding on the back side of the signage to

avoid rusting and entry of dust. The LED board

shall have uniform illumination with 4-8 W / sq. ft

and with brightness more than ambient light.

Suitable size end cap of 1.5 mm thick SS 304

should be provided. (Signage Board should as per

Railway Board Letter No. 2023/SD-II/22/07/02

16 16 Supply, laying, commissioning & testing of GI pipe Metre 800.00 850.00 680000.00

100 mm medium guage with suitable fixing

arrangement by MS clamp of size 50x6 mm and

suitable size nut, bolt etc. (For protection of

cable) as per instruction of Engineer incharge at

KATIHAR DIVISION-ELECTRICAL/N F RLY

17 17 Supply, laying, commissioning & testing of HDPE Metre 800.00 70.00 56000.00

pipe 50 mm dia, PN-6 grade to be laid partly

along the p o l e / w a l l with suitable fixing

arrangement by MS clamp made of MS flat of size

50x6 mm and suitable size nut , bolt, washer etc

as per instruction of Engineer Incharge at site.

18 18 Supply & Erection of earth by 50 mm dia 3 Mtrs. Numbers 16.00 4349.00 69584.00

long (3.6 mm thickness) GI pipe, 32x6 mm GI

strip- 5 Mtrs, GI nuts, bolts including masonry

materials for earthing pit, salt, charcoal, soldered

end terminal etc. and construction of earth pit

covered with RCC cover slab12.7 mm thickness

and watering pipe as per Drg. No.-

PCEE/ELG/DRG/2024/1 Date:- 30.09.2024 and as

per instruction of Engineer Incharge at site.

19 19 Supply, fixing, testing & commissioning of 20 Set 24.00 2724.00 65376.00

amp Industrial plug & socket DB (CRCA/SS made)

complete with metal Plug, socket (3P) & MCB DP

20 amp. as per instruction of Engineer Incharge

20 20 Supply, fixing, testing & commissioning of 63 Set 8.00 9912.00 79296.00

amp Industrial plug & socket DB (CRCA/SS made)

complete with metal Plug, socket (3P/5P) & MCB

DP 63 amp. as per instruction of Engineer

Incharge at Site.

21 21 a) Supply, fabrication, erection, testing, Set 8.00 2005.00 16040.00

commissioning & painting of floor mounted

powder coated cubicle panel board (Modular look)

of suitable size (neither big nor small) ), outdoor

type with double door made of suitable size MS/GI

angle 50 x 50 x 6 mm, MS/GI flat 50 x 6 mm, 14

SWG MS sheet/Powder coated CRCA sheet with

provision of weather proof,rust proof,dust

proof,water proof having internal rubber gasket

with supply and fixing of following ACB/MCCB/Bus

bar/Meter etc. (Connections to be made by

copper strips, glands should be provided at cable

entry and exit, components should be

compartmentalized, Each compartment will be

provided with the door and pad locking

arrangement. The compartment illumination lamp

with door operated switch shall be provided for

each compartment. Panel board drawing

approval must be obtained with clear indication

of make of items of components):-

conforms to IS/IEC 60898:2002

Conforms to IS/IEC 60898 - 1:2002

Conforms to IS/IEC 60898 - 1:2002

KATIHAR DIVISION-ELECTRICAL/N F RLY

25 25 a) Supply, fabrication, erection, testing, Set 4.00 32916.00 131664.00

commissioning & painting of floor mounted

powder coated cubicle panel board (Modular look)

of suitable size (neither big nor small) ), outdoor

type with double door made of suitable size MS/GI

angle 50 x 50 x 6 mm, MS/GI flat 50 x 6 mm, 14

SWG MS sheet/Powder coated CRCA sheet with

provision of weather proof,rust proof,dust

proof,water proof having internal rubber gasket

with supply and fixing of following ACB/MCCB/Bus

bar/Meter etc. (Connections to be made by

copper strips, glands should be provided at cable

entry and exit, components should be

compartmentalized, Each compartment will be

provided with the door and pad locking

arrangement. The compartment illumination lamp

with door operated switch shall be provided for

each compartment. Panel board drawing

approval must be obtained with clear indication

of make of items of components):-

28 28 d) Copper bus bar 100 amps made of electrolytic Set 4.00 900.00 3600.00

grade copper consisting of 4 bars ( 3 Ph and

Neutral ) ( Bus bar should have insulation cover)

ammeter (0-500) amps with s/switch and CTs

31 31 Laying, commissioning & testing of HT/LT Metre 3000.00 55.00 165000.00

XLPE/PVC cable of different sizes partly along the

pole and partly through ground in cable trench by

excavation of ground below 1.5 mt from ground

level with suitable fixing arrangement by MS

clamp of size 50x6 mm and suitable size nut,

bolt. Loading, Unloading & Carrying of cable to

actual work site by contractor's own

arrangement. (Aluminium Crimping Socket should

be provided for each Cable Termination). (Cable

will be supplied by Railway)

32 32 Cutting of Road/Pucca/Hard Soil below (0.3 x 1) Metre 1600.00 298.00 476800.00

mt from ground level and make it good as original

with supply & execution of CC work (1:3:6) as per

instruction of Engineer incharge at site.

Schedule Schedule 3-PART-C (Under Jurisdiction of SSE/Elect./P/IC/KIR) (Station - PRNA & KIR)

Item- 1 Please see the item breakup

S No. Item Description of Item Unit Qty Rate Amount

1 1 Supply, wiring, testing & commissioning of Numbers 110.00 797.00 87670.00

concealed point wiring by FR PVC insulated and

unsheathed 1.5 sq mm, single core multi strand

copper wire with earth continuity wire by PVC

insulated and unsheathed 1 sq mm , single core

multi strand copper wire concealed on wall

through PVC rigid conduit pipe of dia not less

than 20 mm dia heavy duty including all types of

joints and bends as required, complete with 6

amps flush type controlling modular switch to be

mounted on modular GI inner plate and modular

mounting frame of suitable module as per

requirement complete to be concealed in wall as

per instruction of Engineer Incharge at site.

Existing wall should be cut and re-mended to

original finish by contractor's own material. a)FL

Point/LED Tube Point/LED Recess Light Point with

KATIHAR DIVISION-ELECTRICAL/N F RLY

3 3 Supply, wiring, testing & commissioning of Numbers 50.00 737.00 36850.00

concealed plug point on separate board complete

with 2 x 6 Amp modular socket and 6/10 amps

modular switch to be mounted on modular GI

inner plate 6M and 6M modular mounting frame

with GI box to be concealed in wall as per

instruction of Engineer Incharge at site. Existing

wall should be cut and re-mended to original

finish by contractor's own material.

4 4 Supply, wiring, testing & commissioning of Numbers 30.00 855.00 25650.00

concealed 6/16 amps power plug point on

separate board complete with modular 16 amps

switch (with indicator) and 6/16 amps 3 pin

combined shuttered socket to be mounted on

modular GI inner plate 4M or suitable size with

modular mounting frame to be concealed in wall

as per instruction of Engineer Incharge at Site.

5 5 Supply, fixing, connection & testing of 40 Watt Numbers 50.00 1890.00 94500.00

LED Tubelight, Surface/ Pendent mounting LED

Battens in Extruded aluminium housing as per

instruction of Engineer Incharge at Site.

6 6 Supply, installation, testing & commissioning of Numbers 60.00 1614.00 96840.00

15 Watt Recess mounted downlighter with

pressure die-cast aluminium heat sink & PC

diffuser with integrated driver as per instruction

of Engineer Incharge at Site. (Round Type)

7 7 Supply, fixing & testing and commissioning of Numbers 16.00 670.00 10720.00

LED 12 W B22 CDL INVERTER BULB V2 as per

instruction of Engineer Incharge at Site.

8 8 Supply, wiring & testing of main wire by 2.5 sq Metre 2000.00 75.00 150000.00

mm, Single Core FR-LSH PVC Insulated Industrial

Grade Copper Conductor (Unsheathed) Flexible

Cables, 1100 Volts and earth continuity wire by

1.0 sq mm FR-LSH PVC Insulated Industrial Grade

Copper Conductor Conforming to IS: 694

concealed in wall through PVC rigid conduit pipe

not less than 20 mm dia as per instruction of

Engineer incharge at site.

9 9 Supply, wiring & testing of main wire by 4 sq mm, Metre 1500.00 87.00 130500.00

Single Core FR-LSH PVC Insulated Industrial Grade

Copper Conductor (Unsheathed) Flexible Cables,

1100 Volts and earth continuity wire by 1.0 sq

mm FR-LSH PVC Insulated Industrial Grade

Copper Conductor Conforming to IS: 694

concealed in wall through PVC rigid conduit pipe

not less than 20 mm dia as per instruction of

Engineer incharge at site.

10 10 Supply, wiring & testing of main wire by 6 sq mm, Metre 1000.00 100.00 100000.00

Single Core FR-LSH PVC Insulated Industrial Grade

Copper Conductor (Unsheathed) Flexible Cables,

1100 Volts and earth continuity wire by 1.0 sq

mm FR-LSH PVC Insulated Industrial Grade

Copper Conductor Conforming to IS: 694 through

PVC rigid conduit pipe/polythene pipe not less

than 20 mm dia as per instruction of Engineer

incharge at site.

11 11 Supply, installation, testing & commissioning of Numbers 80.00 1265.00 101200.00

10 watt LED Bulkhead luminaires, IP65 as per

instruction of Engineer incharge at site.

12 12 Supply, installation, testing & commissioning of Numbers 25.00 18420.00 460500.00

200 watt LED flood light luminaires complete with

pressure die cast aluminium housing, IP 66,

Luminous efficacy 120 lm/watt with heat sink

feature, surge protection etc including wire

connection as per instruction of Engineer

incharge at site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

13 13 Supply, installation, testing & commissioning of Metre 150.00 1561.00 234150.00

Hot Dipped Galvanized Wire Mesh Cable Tray of

size (Depth- 54 x Width- 150) mm, made of

carbon steel (ASTM A510, Grade-1008 specified)

finished by electrozinc plating (ASTM B 633

specified) alongwith all accessories like suitable

type of splices, locking tab, divider coupler,

preclick, SWK, clamp, Tee, bend, bracket, nut,

bolts etc. Trays should comply standard EN ISO

1461: atleast 550 h of SST. Assemblies with

specific fire resistant properties must have an

E30-E90 certificate. Rod-dia must be from 3.9

mm to 5.9 mm or higher and as per site site

requirement and as per instruction of engineer

incharge at site.

14 14 Design, manufacture, display of wall /hanging / Square 300.00 2868.00 860400.00

floor mounting type LED illuminated sign / Foot

direction boards in half elliptical shape. The

display sheet shall be of unbreakable 040

translucent polycarbonate sheet of 2 mm

thickness. The text / graphics matter visibility

shall not be less than 160 deg. The approved

colour text and graphics shall be printed / router

cut on monomeric calendered vinyl of 70 mm

thickness and shall be firmly pasted on display

sheets. The mounting arrangement shall be

hanging, wall mounting, ceiling mounting, pole

mounting or floor mounting and as per site

requirement. The signage shall have the integral

mounting arrangements with sturdy structural

frame and ACP cladding on the back side of the

signage to avoid rusting and entry of dust. The

LED board shall have uniform illumination with 4-

8 W / sq. ft and with brightness more than

ambient light. Suitable size end cap of 1.5 mm

thick SS 304 should be provided. (Signage Board

should as per Railway Board Letter No. 2023/SD-

15 15 Erection and installation of wall / hanging / floor Square 300.00 287.00 86100.00

mounting type LED illuminated sign / direction Foot

boards in half elliptical shape. The display sheet

shall be of unbreakable 040 translucent

polycarbonate sheet of 2 mm thickness. The

text/graphics matter visibility shall not be less

than 160 deg. The approved colour text and

graphics shall be printed / router cut on

monomeric calendered vinyl of 70 mm thickness

and shall be firmly pasted on display sheets. The

mounting arrangement shall be hanging, wall

mounting, ceiling mounting, pole mounting or

floor mounting and as per site requirement. The

signage shall have the integral mounting

arrangements with sturdy structural frame and

ACP cladding on the back side of the signage to

avoid rusting and entry of dust. The LED board

shall have uniform illumination with 4-8 W / sq. ft

and with brightness more than ambient light.

Suitable size end cap of 1.5 mm thick SS 304

should be provided. (Signage Board should as per

Railway Board Letter No. 2023/SD-II/22/07/02

16 16 Supply, laying, commissioning & testing of GI pipe Metre 800.00 850.00 680000.00

100 mm medium guage with suitable fixing

arrangement by MS clamp of size 50x6 mm and

suitable size nut, bolt etc. (For protection of

cable) as per instruction of Engineer incharge at

KATIHAR DIVISION-ELECTRICAL/N F RLY

17 17 Supply, laying, commissioning & testing of HDPE Metre 800.00 70.00 56000.00

pipe 50 mm dia, PN-6 grade to be laid partly

along the p o l e / w a l l with suitable fixing

arrangement by MS clamp made of MS flat of size

50x6 mm and suitable size nut , bolt, washer etc

as per instruction of Engineer Incharge at site.

18 18 Supply & Erection of earth by 50 mm dia 3 Mtrs. Numbers 16.00 4349.00 69584.00

long (3.6 mm thickness) GI pipe, 32x6 mm GI

strip- 5 Mtrs, GI nuts, bolts including masonry

materials for earthing pit, salt, charcoal, soldered

end terminal etc. and construction of earth pit

covered with RCC cover slab12.7 mm thickness

and watering pipe as per Drg. No.-

PCEE/ELG/DRG/2024/1 Date:- 30.09.2024 and as

per instruction of Engineer Incharge at site.

19 19 Supply, fixing, testing & commissioning of 20 Set 24.00 2724.00 65376.00

amp Industrial plug & socket DB (CRCA/SS made)

complete with metal Plug, socket (3P) & MCB DP

20 amp. as per instruction of Engineer Incharge

20 20 Supply, fixing, testing & commissioning of 63 Set 8.00 9912.00 79296.00

amp Industrial plug & socket DB (CRCA/SS made)

complete with metal Plug, socket (3P/5P) & MCB

DP 63 amp. as per instruction of Engineer

Incharge at Site.

21 21 a) Supply, installation, testing & commissioning of Set 8.00 2005.00 16040.00

12 way SPN Distribution Board, Flush/Surface

mounting, IP 43 grade protection with copper bus

bar, fully shrouded neutral bar, earth bar, cable

ties, metal double door as per IS 8623 - III with

supply and fixing of following RCBO/MCB's as per

instruction of Engineer Incharge at Site.

conforms to IS/IEC 60898:2002

Conforms to IS/IEC 60898 - 1:2002

Conforms to IS/IEC 60898 - 1:2002

25 25 a) Supply, fabrication, erection, testing, Set 4.00 32916.00 131664.00

commissioning & painting of floor mounted

powder coated cubicle panel board (Modular look)

of suitable size (neither big nor small) ), outdoor

type with double door made of suitable size MS/GI

angle 50 x 50 x 6 mm, MS/GI flat 50 x 6 mm, 14

SWG MS sheet/Powder coated CRCA sheet with

provision of weather proof,rust proof,dust

proof,water proof having internal rubber gasket

with supply and fixing of following ACB/MCCB/Bus

bar/Meter etc. (Connections to be made by

copper strips, glands should be provided at cable

entry and exit, components should be

compartmentalized, Each compartment will be

provided with the door and pad locking

arrangement. The compartment illumination lamp

with door operated switch shall be provided for

each compartment. Panel board drawing

approval must be obtained with clear indication

of make of items of components):-

28 28 d) Copper bus bar 100 amps made of electrolytic Set 4.00 900.00 3600.00

grade copper consisting of 4 bars ( 3 Ph and

Neutral ) ( Bus bar should have insulation cover)

29 29 e) Digital voltmeter (0-500) amps and Digital Set 4.00 5581.00 22324.00

ammeter (0-500) amps with s/switch and CTs

KATIHAR DIVISION-ELECTRICAL/N F RLY

31 31 Laying, commissioning & testing of HT/LT Metre 3000.00 55.00 165000.00

XLPE/PVC cable of different sizes partly along the

pole and partly through ground in cable trench by

excavation of ground below 1.5 mt from ground

level with suitable fixing arrangement by MS

clamp of size 50x6 mm and suitable size nut,

bolt. Loading, Unloading & Carrying of cable to

actual work site by contractor's own

arrangement. (Aluminium Crimping Socket should

be provided for each Cable Termination). (Cable

will be supplied by Railway)

32 32 Cutting of Road/Pucca/Hard Soil below (0.3 x 1) Metre 1415.00 298.00 421670.00

mt from ground level and make it good as original

with supply & execution of CC work (1:3:6) as per

instruction of Engineer incharge at site.