Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 LAccepted-Finance | ₹2.1 L | L1 | Accepted-Finance Lowest |
| 2 | L2₹2.3 L+₹17,367 (8.29%)Rejected-Finance | ₹2.3 L+₹17,367 (8.29%) | L2 | Rejected-Finance Other than lowest |
| 3 | L3₹2.3 L+₹21,020.20 (10.0%)Rejected-Finance | ₹2.3 L+₹21,020.20 (10.0%) | L3 | Rejected-Finance Other than Lowest |
| Sl No | Description | Qty | Unit | kamlesh kishore L1 | sunil verma L3 | VIKAS L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge. | 33.67 | Cum | 250 ₹8,417.5 Lowest | 310 ₹10,437.7 | 350 ₹11,784.5 |
| 2.00 | Providing, Laying,Jointing Testing and commissioning of HDPE pipes(High Density Polyethylene pipes) of following diameter and class confirming to IS 4984-1995 fusion welding process including all necessary fittings in all leads and lifts to be entitre satisfaction of Engineer-In- Charge(Earth work in trenches to be measured and separately.)HDPE Pipe 63mm dia PE80 PN 6.00 | 700 | Rmt. | 240 ₹1,68,000 Lowest | 270 ₹1,89,000 | 260 ₹1,82,000 |
| 3.00 | Providing, Supplying and fixing of Gun metal Wheel Valve screwed female ends (screwed-in-bonnet inside screw, non rising stem, integral seats & hand wheel operated, diameter mentioned below in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge). GM Gate Valve 50mm dia | 2 | Nos. | 9,000 ₹18,000 Lowest | 10,000 ₹20,000 | 10,000 ₹20,000 |
| 3.01 | GM Gate Valve 65 mm dia | 1 | Nos. | 15,000 ₹15,000 | 11,000 ₹11,000 Lowest | 13,000 ₹13,000 |
Tender Value
₹2.0 L
EMD Value
₹3,950
Closing Date
3 Sept 2025, 6:00 pmClosed
Executive Engineer
EE JSV Mandi
Providing Laying Jointing and Testing of HDPE pipe 63mm dia PE PN 4 700 Rmt from Storage Tank at Ghughta to Nela
2025_HPIPH_113334_1
6821-6919
Open Tender
Miscellaneous Works
Item Rate
90 days
Majhwar
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹3,950
15 Jul 2026
29 Aug 2025
4 Sept 2025
29 Aug 2025
3 Sept 2025
29 Aug 2025
Amount
Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge.
Providing, Laying,Jointing Testing and commissioning of HDPE pipes(High Density Polyethylene pipes) of following diameter and class confirming to IS 4984-1995 fusion welding process including all necessary fittings in all leads and lifts to be entitre satisfaction of Engineer-In- Charge(Earth work in trenches to be measured and separately.)HDPE Pipe 63mm dia PE80 PN 6.00
Providing, Supplying and fixing of Gun metal Wheel Valve screwed female ends (screwed-in-bonnet inside screw, non rising stem, integral seats & hand wheel operated, diameter mentioned below in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge). GM Gate Valve 50mm dia
GM Gate Valve 65 mm dia
VIKAS (BID ID -550688)
sunil verma (BID ID -550670)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .