REPAIR/REPLACEMENT OF ROOF SHEETING, FALSE CEILING, WINDOWS AND OTHER CONNECTED ITEMS ALONGWITH DAY TO DAY MAINTENANCE OF SANITARY FITTINGS, INTERNAL WATER SUPPLY AND OTHER ALLIED WORKS AT SECT I TO IV OF AGE CHARDUAR UNDER GE (N) TEZPUR

Amount

Dismantling plain or corrugated AC sheeting , any, thickness or similar pattern roof coverings.

Pre-painted galvalume aluminium zinc coating GI based corrugater steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley/gutter/eve board fixed with self tapping screws etc., complete all as specified and as directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F Mild steel sheet eaves gutters of dia 150 mm, made out of 1.25mm thick sheet , galvanised class 3, half round with rounded edges complete all as specified and as directed.

S & F Bands,straps,supportsorstays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Dismantling of wall and ceiling boards ( fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets and removing unserviceable materials from site of work complete all as specified and directed.

M & L 4 mm thick asbestos Cement Plain building boards, fixed to timber frame work with screws in ceilings complete all as specified and as directed.

S & F anodised GI snap grid (Size of grid 605mmx605mm ) frame work for false ceiling including GI wire 4mm thick as a suspender for GI snap grid framing all as specified

S&F 4 mm thick Non asbestos fibre cement building board decorative type( e-board) fixed in aluminium snap grid frame work with screws.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

S&F 5 mm lnsulated PVC Wall Lining consisting of PVC Insulated Panels with Single Side Prelam PVC sheet of designed pattern used in-stead of plain colour sheet duly fitted into the wall as per specifications and drawing

Dismantling framed timber scantlings 40 sq. cm & over in section, in any position

M&L for 2nd class hard wood scantling wrought finished in any position over and 40 sq. cm & over in section,complete all as specified and directed.

Dismantling of old damaged timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section as in unframed work of any description and removing unserviceable materials from site of work complete all as specified and directed.

S & F second class hard wood plain fillets square,rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 Sq.cm but not exceeding 13 Sq.cm complete all as specified and as directed.

S & F second class hard wood plain fillets square, rectangular or triangular in section, clean sawn secured with nails, cross sectional area exceeding 13Sq.cm but not exceeding 25 Sq.cm complete all as specified and as directed.

S&F 12 mm thick Particle board for insulation purposes, fixed with nails to timber framework fixed to vertical surfaces complete all as specified and directed.

S&F Anodised aluminium frame for door,window and ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified

S&F Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and as directed.

S & F in repairs Hydraulically regulated Door closer Aluminium (extruded section body) , universal type, suitable for door shutters complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exe 1.5 sqm n.exe 4 sqm each.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each

Taking down Shutters of any description n exc 1 sq.m each

Taking down Shutters of any description exc 2 sq.m each

Taking down shutters and refixing in same opening of any description n.exc 1 Sqm each complete all as specified and directed.

Taking down shutters and refixing in same opening of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 30 mm thick flush shutters , solid core construction , with Block boards core and plywood face panels , commercials type on both side complete all as specified and as directed.

S&F 35mm thick 2nd class hardwood glazed skelton shutter open rebated and prepaid to receive glass gauze extra (without sash bar), edges of plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepaid to receive glass gauze etc, divided into squares (with sash bar), edges of plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) complete all as specified and directed.

S&F 1st class soft wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each

S & F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specifications and drawings in Section 8 of SSR Part-II complete all as specified and directed.

S&F Factory made single extruded WPC(Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

Supply & fixed in repairs mild steel butt hinges "medium weight" cold rolled complete all as directed of size :- (a) 50 mm size

(b) 75mm size

(c) 100 mm size

Supply & fixed in repairs aluminium handles cast type, anodised complete all as directed of size :- (a) 125 mm long

(b) 150 mm long

Supply & fixed in repair mild steel barrel tower bolts stove enamelled black with bright bolt complete all as directed of size :- (a) 100 mm long

(b) 125 mm long

(c) 150 mm long

(d) 200 mm long

S&F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

S&F Hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws 75mm size

S&F in repairs Brass chromium plated brackets

S&F in repairs Harrison rails,anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc.

Supply and fixed in repair mild steel chromium plated aluminium anodized tubular curtain rails, 19mm dia, with fixing brackets, stops, rollers etc. complete all as specified and as directed.

S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire & average width of aperture 1.40mm with tinned tacks, or galvanised wire staples

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.

Supply and fixed in repair 15mm bore chromium plated bib taps, cast copper alloy, screwed down, with crutch or butterfly handle, screwed for steel pipe or brass ferrule complete all as specified and directed.

Supply and fixed in repair 15mm bore chromium plated stop valves, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe for unions complete all as specified and directed.

Supply and fixed in repair 15mm bore stop valves, chromium plated, with Long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with capstan head, screwed for steel pipe or brass ferrule complete all as specified and directed.

S&F in repairs plastic water closet seat cover, white / black, with mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair 500 ltrs rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I complete all as specified and as directed.

S&F in repair 1000 ltrs rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I complete all as specified and as directed.

S&F in repair ball brass valves high pressure, with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed 20 mm bore dia of pipe complete all as specified and as directed.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. complete all as specified and as directed.

Supply and fixed in repair vitreous china wash down water closet pan (Pedestal pattern), white, including fixing bolts nut & plastic water closet seat back excld flushing cistern and flush pipe, including taking down unserviceable water closet pan complete all as specified and directed.

S&F in repair vitreous china squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete (excluding flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc. complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless syphone action type, flushing cistern low level, white with inlet, ball valve float and handle incl brackets with PVC high flush pipe complete all as specified and directed.

Vitreour china WHB size 550 x400 mm (Flat back or angle back type) white with 32 mm dia brass CP Waste fittings , galvanised iron light grade 32 mm bore waste pipe, a pair of CI brackets duly painted/erecting stand incl cutting and pinning in ends making good disturbed surfaces in cm 1:3 incl taking down u/s WHB and connected items, complete all as spd and as directed

S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S & F for 15mm size PVC connection pipe with PTMT nut of length 450mm complete all as specified and directed.

S&F 15 mm size PVC connection pipe with PTMT nuts of length 600 mm complete all as specified and directed.

S & F waste pipe of dia 32 mm complete all as specified and as directed.

S&F 32 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F 32 mm Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms)

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms)

S&F Soap dish, Vitreous China white, approximate size 160x160x90mm

S&F in repair chromium plated towel rail 600mm long complete all as specified and directed.

M & L for PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed.

M & L for PVC (SWR) multi Floor trap of 75 mm outlet with grating including jointing with solvent cement complete all as specified and directed.

M & L for PVC (SWR) gully trap of 125/ 110 mm setting and jointing with solvent cement complete all as specified and directed.

S & F 110mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall.

S & F 110MM PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F in repairs PVC (SWR) , 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed.

S & F 75mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall.

S & F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S & F PVC (SWR) bends of radius 110mm bore.

S & F PVC (SWR) bends of radius 75mm bore.

S & F PVC (SWR) junction single,(Single T) equal or unequal of radius 110mm bore.

S & F PVC (SWR) junction single,(Single T) equal or unequal of radius 75mm bore.

S&F 110mm dia PVC(SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed.

S&F mild steel flat iron 25 x 3 mm as in band, straps, hold fasts etc and similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as directed.

S&F 3.0 mm thick figured glass, pin head type glazing with oil putty in squares not exc. 0.50sqm in each pane complete all as specified and as directed.

S&F Sheet glass 5.5mm thick, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones

Dismantling of floor hearth or wall tiling incl cement mortar bedding ( but not backing) and removing debris and rubbish off the premises.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc and including rubbish off the presises complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor/roof finishes etc. complete all as specified and directed.

M&L for rendering 10mm thick on brick or concreteor stone surfaces in cement mortar (1:4) as in screed bed/backing coat for laying wall finishes complete all as specified and directed.

M&L coloured glazed ceramic tiles of size 300x200x7 or 350x250x7mm or 450x350x7 mm thick, in vertical surfaces, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed.

M&L for 25 mm thick cement concrete (1:2:4) type B1 ( 20mm graded stone aggregate) as in floor finished rough to receive floor finishes complete all as specified and directed.

M&L cement Concrete 1:2:4 type B1 (using 20mm Graded Stone Aggregate) 40 mm thick finished even and smooth without using extra cement complete all as specified and as directed.

M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.18sqm but not exceeding 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.18sqm but not exceeding 0.36 sqm, in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for non skid ceramic colour tiles, 7 to 8 mm thick, area of each tiles exc 0.06sqm but not exc 0.11 sqm squre / rectangular in floor set and jointed in neat cement slurry and pointed in cement mixed with colour pigment to match over 15 mm thick screed bed or bedding layer in cement mortar(1:4) as in floors for receiving tiles complete all as specified and as directed.

Demolition of brick work masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed by Engr-in-charge.

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brickwork or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, in ceiling,and finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick on fair face of brick wall or concrete surface in cement mortar1:4 mixed with WPC @ 3% (or as per manufaturers instruction) finished even and smooth without using extra cement, complete all as specified and as direted.

Supply integral water proofing compund conforming to IS and as approved complete all as specified

Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or CM(one side only measured in cases where both sides are plastered)

Gl wire netting 0.90mm dia & 12mm mesh lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting & waste

M&L Rendering 10mm thick on stone masonry surfaces or surface other than one face of lathing in CM (1:6)

M&L Rendering 10mm thick on stone masonry surfaces or other side of lathing of lathing in CM (1:6)

Taking up or down steel water tubings, connections and fittings etc complete including cleaning for refixing or removal to store and making good disturbed surfaces of walls/ceilings etc complete all as specified and as directed of following bore:- (a) Bore tubing 15mm

(b) Bore tubing 20mm

(c ) Bore tubing 25mm

S&F for steel tubing 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors complete for this following. (a) Bore tubing 15mm

(b) Bore tubing 20mm

(c ) Bore tubing 25mm

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified of size :- (a) 16 mm bore outer dia

(b) 20 mm bore outer dia

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. complete all as directed.

M&L including preparing of new surfaces and treated with two coats of white wash on it

M&L for prepration of new plastered surfaces and applying two coats of cement base paint complete all as specified

M&L for preparation of new or previously un-treated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description n.exc.10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of new or previously un-treated wood and wood base surfaces of any description, not otherwise described exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new or previously un-treated wood and wood base surfaces of any description, not otherwise described nexc 10cmwidth or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

Welding in repairs exc 2.5cm but n exc 5cm in length thickness of metal to be welded exc 20mm but n exc 25mm,including refixing the same complete all as specified and as directed

S&F for rolled mild steel in joist, channel, angle or tee / tubular sections , fixed independently with connected plates Fe 410-W (Gde- E-250) quality-B complete all as specified and as directed

Dismantling boarding, any description, fixed in any position with nails

M&L for 40mm thick hard wood planed at both sides boarding as in joist of ceiling, rafters, truss and members complete all as specified and directed

NOTES: 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule "A" notes for details.

M/S L N ENTERPRISE (BID ID -3460146)

M/S IMRAN ALI (BID ID -3465461)

M/S SAMJHANA CONSTRUCTION (BID ID -3460301)

AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3458678)

KMY Enterprise (BID ID -3466078)

M/S RSB ENTERPRISES (BID ID -3460731)