Special Repair and white washing, painting and flooring of XEN residence Kothi No. 3 at Bandepur, Sonipat.

Amount

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. (HSR Item no. 5.45)

Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) (HSR Item no. 7.22.1

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 ( 1 cement : 6 fine sand) (HSR Item no. 11.18)

Providing & laying average 6 mm thick POP Coating on wall, ceiling, beams & lintels etc. Complete in wall respects at approved by the Engineer-in-charge. (HSR Item no. 11.57)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note :- Butt hinges and necessary screws shall be paid separately) Second class teak wood:- 35mm thick shutters (HSR Item no. 12.7,1.1)

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws- 35 mm thick 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated Hollock wood (HSR Item no. 12.19.1.1.2)

Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (HSR Item no. 11.58)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work ( two or more coats) over and including water thinnable priming coat with cement primer. (HSR Item no. 11.64.1)

Painting the wooden/metal surface with synthetic enamel paint of approved brand and manufacture given an even shade: Two or more coats on new work. (HSR Item no. 11.82.1)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to given an even shade. (HSR Item no. 11.78)

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coats (HSR Item no. 11.72.2)

Providing and fixing white vitreous chinaware extended wall mounting water closet of size 78x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern/PVC cistern (with brass fitting )into the wall with dual flush fitting, of flushing copacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (HSR Item no. 22.33

i) Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 150 mm diameter (HSR Item no. 22.102.2)

(ii) Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore (HSR Item no. 22.103.2)

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms, (HSR Item no. 22.119.2)

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. (HSR Item no. 22.211)

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breath 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. (HSR Item no. 22.127)

Extra for depths beyond 60 cm of sand cast iron drop connection complete: (HSR Item no. 22.204.1

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (HSR Item no. 22.117

Providing and fixing in position best Indian make C.P. brass Tooth Brush cum Tooth Paste Holder fixed in with rawl plugs with C.P. brass screws complete including cutting making good the walls etc. Tooth Brush-cum-Tooth Paste holder. (HSR Item no. 22.213.1)

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer-in-charge. 15 mm nominal dia. (HSR Item no. 22.12.1)

(i)Supply and erection of sheet steel enclosures 1/pole/2 pole/4 pole on wall/on existing pedestal complete as required. S.P.N. or DP enclosure suitable for DP MCB. (HSR Item no. 23.22.3.2)

(ii) Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. Double Pole (HSR Item no. 23.22.5.4)

STREET LIGHT (i) 3 metres long 50 mm dia pole duly embedded 0.6m below ground level. (HSR Item no. 24.4.1.1)

(ii) Erection of RCC/PCC pole strut in brick ballast and ramming the foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required. (HSR Item no. 24.4.12)

PVC CONDUIT PIPE ONLY (SURFA CE OR RECESSED) FOR ELECTRICAL POINTS (Group C) (HSR Item no. 23.7.1.3)

(Group C) (HSR Item no. 23.7.3.3)

(Group C) (HSR Item no. 23.7.4.3)

(Group C) (HSR Item no. 23.7.5.3)

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. Table Top (size 49x40x15 cm) (HSR Item no. 22.221.11)

Supply and carriage of sanatroy material i.e. allow, Tee, consealed, socket, union, nipals, hook, bibcock angle valve, piller cock, jet, stopper, sfeda and soot etc

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW(Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anti-corrosive bitumastic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. (HSR Item no. 33.11) (i)100 mm nominal size dia

(HSR Item no. 33.11) (ii)150 mm nominal size dia

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (HSR Item no. 10.62)

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. (HSR Item no. 13.35):

The Matindu Adarsh Coop. L&C Society

THE PURKHAS CO-OPERATIVE L AND C SOCIETY LTD