ARC work of HT/LT lines, T/C, maintenance (including raising of plinth, TC Booting, MVCC Stringing) & O/H Laying of XLPE Cable Pole to Pole of feeders for ND and any Other Scheme in the jurisdiction of Kathor Sdn under KIM ind Division. Through outsourced agency for existing DGVCL Network for SDN under Kim Division.

Name of Work :- Rate contract for erection of HT/LT line & T/C work for various scheme work for SDN

office under Kim Ind Division Office.

ITEM CODE Details of Works Qty Unit Labour Rate Amount

HT TAPPING FROM THE EXISTING

POLE INCLUDING FIXING OF CROSS

ARMS, CLAMPS ANTI-CLIMBING

DEVICES, DANGER BOARD,

INSULATORS ETC. COMPLETE AND

1 9926000001 PAINTING OF FABRICATED No.

MATERIALS AND NUMBERING

COMPLETE WITH COST OF PAINTS AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET

ERECTION OF PSC POLES OF 8 *200

KG INCLUDING EXCAVATION OF PIT

AND REFILLING OF EARTH, FIXING

OFCROSS ARMS, TOP FITTING

CLAMPS ANTI-CLIMBING DEVICES,

INSULATORS ETC. COMPLETE AND

PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

ERECTION OF STEEL POLES OF 9 TO

11 METERS INCLUDING EXCAVATION

OF PIT AND REFILLING OF EARTH,

FIXING OFCROSS ARMS, TOP FITTING

CLAMPS ANTI-CLIMBING DEVICES,

DANGER BOARD, INSULATORS ETC.

3 9926000003 COMPLETE AND PAINTING OF STEEL No.

POLE, FABRICATED MATERIALS USED

ON THE POLEAND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND

ERECTION OF STEEL POLE OF

METERS FOR RAILWAY CROSSING ON

BG/MG/NG LINE FOR 0.400/11/22KV

OVERHEAD LINES I.E INCLUDING

EXCAVATION OF PIT & REFILLING OF

EARTH, FIXING CROSS ARMS, TOP

FITTING CLAMPS,ANTI-CLIMBING

DEVICES DANGER BOARD,

INSULATORS ETC. COMPLETE AND

PAINTING OF STEEL POLES,

FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH

COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND

ERECTION OF DOUBLE POLE

STRUCTURE OF 8 METERS 200 KG

PSC POLES INCLUDING EXCAVATION

OF PITS & REFILLING OF EARTHING,

FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING

5 9926000005 BOARDS,INSULATORS No.

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

ERECTION OF DOUBLE POLE

STRUCTURE OF 9 TO

METERS.STEEL POLE INCLUDING

EXCAVATION OF PITS & REFILLING

OFEARTH, FIXING OF CHANNELS,

SUPPORTING ANGLES, CLAMPS,ANTI-

CLIMBING DEVICES DANGER

BOARDS, INSULATORS

6 9926000006 ETC.COMPLETE & PAINTING OF No.

POLES,FABRICATED MATERIALSUSED

ON THE POLES AND NUMBERING

WITH COST OF PAINTSAS PER

STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET

AND EARTHING.(WITHOUT AB

ERECTION OF DOUBLE POLE

STRUCTURE WITH MOUNTING OF AB

SWITCH, HG FUSES OF 8 MTRS

KG PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING

OF EARTH,FIXING OF CHANNELS

SUPPORTING ANGLES, CLAMPS, ANTI-

CLIMBING DEVICES, DANGER

BOARDS, INSULATORS,DOFUSES ETC.

COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH

COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDINGOF

ERECTION OF GUY SET AND

EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE

STRUCTURE WITH MOUNTING OF AB

SWITCH,HG FUSES, 9 TO 11 METERS

STEEL POLES INCLUDING

EXCAVATION OF PITS AND REFILLING

OF EARTH, FIXING OFCHANNEL,

SUPPORTING ANGLES, CLAMPS, ANTI-

CLIMBING DEVICES , DANGER

BOARDS, INSULATORS, ETC.

COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND

EARTHING.(WITH AB SWITCH)

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

ERECTION OF DOUBLE POLE

STRUCTURES WITH MOUNTING OFAB

SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX.

OF 8 METER,200KG PSC POLE

METERS POLES INCLUDING

EXCAVATION OF PITS AND REFILLING

OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO

SITE, FIXING OF CHANNELS,

9 9926000009 SUPPORTING ANGLES,BRACINGS No.

CROSS ARMS CLAMPS, ANTICLIMBING

DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USEDON

THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND

ERECTION OF DOUBLE POLE

STRUCTURE WITH MOUNTING OF AB

SWITCH,HG FUSES TRANSFORMERS,

LIGHTENING ARRESTORS,

DISTRIBUTION BOX 9 TO 11 METERS

STEEL POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF

EARTH CARTING OF TRANSFORMERS

FROM STORE TO SITE, FIXINGOF

CHANNELS SUPPORTING ANGLES,

BRACING, CROSS ARMS,CLAMPS,

ANTICLIMBING DEVICES, DANGER

BOARDS,CONDUCTOR AND CABLE

WIRING ETC. COMPLETE AND

PAINTING OF POLES FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTIONS OF GUY SETS AND

ERECTION OF GUY SET INCLUDING

EXCAVATION OF PITS & REFILLING OF

EARTH AS PER STANDARD

SPECIFICATION WITH STAY CLAMPS,

STAY WIRE, ANCHOR ROD, TURN

BUCKLE, EYEBOLT, GUY INSULATOR,

CEMENT CONCRETE BLOCK ETC. BUT

EXCLUDING CONCRETING.

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

CONCRETING OF POLES, GUYS, ETC.

INCLUDING COST OF CEMENT SAND

METAL (1:2:4) AND WATER ETC. AS

12 9926000012 PER STANDARD SPECIFICATION. CMT

(cement Should be 53 grade) used for

ERECTION OF COIL TYPE EARTHING

INCLUDING COST OF COAL,SALT ETC.

13 9926000013 BUT WITHOUT COST OF GI WIRE AS No.

PER STANDARD SPECIFICATION(20kg

solt+20kg coal)

ERECTION OF GI PIPE/CI PLATE TYPE

EARTHING INCLUDINGCOST OF COAL

SALT ETC. BUT WITHOUT COST OF

PIPE/GIPLATE GI WIRE AS PER

STANDARD SPECIFICATION.(20kg

solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE

COMPLETE WITH CLAMPS, BRASS

NIPPLE, BRASS HOLDER TECK WOOD

15 9926000015 BUSH,REFLECTORS FUSE, WIRING No.

ETC. AS PER STANDARD

SPECIFICATION BUT EXCLUDING

COST OF MATERIALS.

OF(30mm2)ACSR/34MM@,55MM2 AAA

CONDUCTOR for ALL TYPE OF

16 9926000016 CONDUCTOR (EXCEPT DOG

CONDUCTOR) FOR 11/22KV & LT LINES

INCLUDING FIXING OF INSULATORS,

BINDING JUMPERING ETC.

STRINGING OF GI WIRE 8 SWG

INCLUDING BINDING JUMPERING ETC.

PROVIDING SINGLE PHASE SERVICE

CONNECTION WITH PVC 2.5/4MM2

TWIN CORE CABLE FROM TERMINAL

POLE TO METERING POINT

18 9926000018 INCLUDING FIXING OF METER WITH No.

METER EARTHING COMPLETE WORK

AS PER STANDARD SPECIFICATION

BUT EXCLUDING COST OF

PROVIDING THREE PHASE 4 WIRE

SERVICE CONNECTION WITH PVC

4MM2/10MM2 FOUR CORE CABLE

FROM TERMINAL POLE TO METERING

19 9926000019 POINT INCLUDING FIXING OF METER No.

WITH METER EARTHING COMPLETE

WORK AS PER STANDARD

SPECIFICATION BUT EXCLUDING

COST OF MATERIALS.

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

ADDITIONAL COST FOR EXCAVATION

OF PIT IN HARD ROCK AREA FOR

ERECTION OF POLE/ GUY ETC. AS

PER STANDARD SPECIFICATION

OVER & ABOVE NORMAL COST

20 9926000020 COVERED AGAINST EXCAVATION OF No.

PIT UNDER NORMAL SOIL FOR

ERECTION OF POLE,GUY, DOUBLE

POLE STRUCTURE EARTHING WITH

THE APPROVAL OF SUPDT.ENGINEER.

PROVIDING GUARDING TO HT LINE

ON ROAD/ RAIL CROSSING.

PROVIDING GUARDING OF LT LINES

ON ROAD/RAIL CROSSING.

23 9926000023 LT LINE TAPPING- SINGLE PHASE No. 51

24 9926000024 LT LINE TAPPING- THREE PHASE No. 93

Stringing/LAYING OF OVER HEAD LT

CABLE FOR ROAD CROSSING,HT LINE

CROSSING AND TELEPHONE LINE

CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE

STRUCTURES WITH , HG

FUSES,TRANSFORMERS, LIGHTENING

ARRESTOR, DISTRIBUTION BOX. ON

METERS 200 KGAND PSC POLE

INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO

SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS

CROSS ARMS CLAMPS, ANTICLIMBING

DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON

THE POLE AND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

ERECTION OF SINGLE POLE

STRUCTURES WITH MOUNTING OFAB

FUSES,TRANSFORMERS,

LIGHTENINGARRESTOR,

DISTRIBUTION BOX. ON 9 to

METERS RSJ POLE INCLUDING

EXCAVATION OF PITS AND REFILLING

OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO

SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS

CROSS ARMS CLAMPS, ANTICLIMBING

DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON

THE POLE AND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND

ERECTION OF PSC POLES OF 10 *270

KG INCLUDING EXCAVATION OF PIT

AND REFILLING OF EARTH, FIXING OF

CROSS ARMS, TOP FITTING CLAMPS

ANTI-CLIMBING DEVICES,

INSULATORS ETC. COMPLETE AND

PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET

ERECTION OF DOUBLE POLE

STRUCTURE OF 10 METERS 270 KG

PSC POLES INCLUDING EXCAVATION

OF PITS & REFILLING OF EARTHING,

FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING

29 9926000029 BOARDS,INSULATORS No.

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

STRINGING OF 100MM2 ACSR/100MM2

AAAC CONDUCTOR FOR 11/22KV & LT

30 9926000030 LINES INCLUDING FIXING

OFINSULATORS, BINDING JUMPERING PER KM

STRINGING OF DOG CONDUCTOR

FOR 11/22KV & HT LINES INCLUDING ONE COND

FIXING OF INSULATORS, BINDING PER KM

ERECTION OF DOUBLE POLE

STRUCTURES WITH MOUNTING OF AB

SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX.

OF 10 METERS 270 KGAND PSC

POLES INCLUDING EXCAVATION OF

PITS AND REFILLING OF EARTH,

CARTING OF TRANSFORMERS

FROMSTORES TO SITE, FIXING OF

CHANNELS, SUPPORTING

ANGLES,BRACINGS CROSS ARMS

CLAMPS, ANTI-CLIMBING

DEVICES,DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND

DISMENTALLING OF 8 MTR PSC POLE

WITH CREDITING OF FABRICATION AT

33 9926000033 STORE & STACKING OF POLE SAFELY No.

ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE

WITH CREDITING OF FABRICATION AT

34 9926000034 STORE & STACKING OF POLE SAFELY No.

ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER

CENTRE (8 MTR PSC POLE) (WITH

TRANSFORMER) WITH CREDITING OF

35 9926000035 FABRICATION & TRANSFORMER AT No.

STORE & STACKING OF POLE SAFELY

ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

DISMENTALLING OF TRANSFORMER

CENTRE (8 MTR PSC POLE) (WITHOUT

TRANSFORMER) WITH CREDITING OF

36 9926000036 FABRICATION AT STORE & STACKING No.

OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL

STRINGING OF LT ABC OF 1*35 SQ

MM + 1*25 SQ MM INCLUDING FITTING

OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION

CLAMP, FIXING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR

FIXING OF MESSENGER WIRE AND TO

PROVIDE SERVICE CONNECTION ON

AERIAL BUNCH CABLE BY INSULATED

PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX

COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ

INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP,

FIXING OF CROSS ARM, LT SHACKLE

38 9926000038 INSULATOR ETC. FOR FIXING OF KM

MESSENGER WIRE AND TO PROVIDE

SERVICE CONNECTION ON AERIAL

BUNCH CABLE BY INSULATED

PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX

COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF 11KV ABC OF 3*95 SQ

MM +80 SQ MM INCLUDING FITTING

OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION

39 9926000039 CLAMP, FIXING OF CROSS ARM, KM

INSULATOR,PREPARING SHACKLE

POINT,JUMPERS ETC. AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

STRINGING OF 22 KV ABC OF 3*70 SQ

MM +95 SQ MM INCLUDING FITTING

OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION

CLAMP, FIXING OF CROSS ARM,

40 9926000040 BINDING TO PIN KM

INSULATOR,PREPARING SHACKLE

POINT,JUMPERS ETC. AS REQUIRED

AND DIRECTED BY ENGINEER IN

STRINGING OF LT ABC OF 2*50 SQ MM

+1*25 SQ MM+ 35 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E.

SPECIAL DESIGN SUSPENSION /

TENSION CLAMP, FIXING OF CROSS

ARM, LT SHACKLE INSULATOR ETC.

FOR FIXING OF MESSENGER WIRE

AND TO PROVIDE SERVICE

CONNECTION ON AERIAL BUNCH

CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS

REQUIRED & DIRECTED BY ENGINEER

DISMENTALING OF RSJ (9/11 METER)

42 9926000042 POLE AND CREDITING THE OLD No.

MATERIAL TO STORE

DISMENTALING OF TRANSFORMER

CENTER ON 10MTR,270KG PSC

POLE(WITHOUT TRANSFORMER) WITH

CREDITING OF FABRICATION AT

STORE AND STACKING OF POLE

SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL

DISMENTALING OF TRANSFORMER

CENTER ON 10MTR,270KG PSC

POLE(WITH TRANSFORMER) WITH

CREDITING OF FABRICATION AT

STORE AND STACKING OF POLE

SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL

DISMENTLING OF 11KV ABC OF 3*95

SQ MM +80 SQ MM AND CREDITING

45 9926000045 FITTING OF ALL ACESSARIES AND KM

FABRICATION TO DEPARTMENTAL

DISMENTLING OF 22 KV ABC OF 3*70

SQ MM +95 SQ MM AND CREDITING

46 9926000046 FITTING OF ALL ACESSARIES AND KM

FABRICATION TO DEPARTMENTAL

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

DISMENTALING OF LT ABC OF 1*35

47 9926000047 SQ MM + 1*25 SQ MM AND CREDITING KM

FITTING OF ALL ACESSARIES TO

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 3*50

SQ MM +1*25 SQ MM+1*35 SQ MM AND

CREDITING FITTING OF ALL

ACESSARIES TO DEPARTMENTAL

DISMENTALING OF LT ABC OF 2*50

SQ MM +1*25 SQ MM+ 35 SQ MM AND

CREDITING FITTING OF ALL

ACESSARIES TO DEPARTMENTAL

RESTRINGING OF ALL TYPE OF

CONDUCTOR (EXCEPT DOG

50 9926000050 CONDUCTOR) FOR 11/22KV & LT LINES

INCLUDING FIXING OF INSULATORS,

BINDING JUMPERING ETC.

RESTRINGING OF DOG CONDUCTOR

51 9926000051 FOR 11/22KV HT LINES INCLUDING ,

BINDING JUMPERING ETC.

LABOUR CHARGE FOR THE

INSTALLATION OF NEW DTR METER.

(METER WILL BE PROVIDED BY

LABOUR CHARGE FOR THE

REPLACEMENT OF DTR METER AND

53 9926000053 OLD METER SHOULD BE CREDITED No.

TO SDN STORE. (METER WILL BE

PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT

COIL FOR DTR METER CONNECTION.

(CT COIL WILL BE PROVIDED BY

LABOUR CHARGE FOR REPLACEMENT

OF CT COIL FOR DTR METER

55 9926000055 CONNECTION AND OLD CT SHOULD PER CT

BE CREDITED TO SDN STORE. (CT

COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF

56 9926000056 MMB FOR DTR METER (MMB WILL No.

BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT

57 9926000057 OF DTR METER BOX. (METER WILL No.

BE PROVIDED BY DGVCL)

PROVIDING / REPLACEMENT OF

SQ MM 10 CORE COPPER CABLE

METER (CABLE TO BE PROVIDED BY

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

LABOUR CHARGE FOR

PROVIDING/RECONNECTION OF

59 9926000059 TERMINAL CONNECTION WITH PER

PROPER SIZE OF LUGS. (LUGS COST TERMINATION

IS BORNE BY AGENCY)

LABOUR CHARGE FOR THE SPOT

READING OF DTR METER WITH

DETAIL SURVEY OF DEFECT IF ANY. A

DULY SIGN COPY BY SURVEYOR

PERSON OF AGENCY IN PRO-FORMA

60 9926000060 REPORT SHOULD BE SUBMITTED TO PER DTR

SDN OFFICE.(* ONLY IF ALL

PARAMETER OF VOLTAGE, CURRENT

& LOAD AS SHOWN IN PER-FORMA IS

FILLED) AS PER THE INSTRUCTION OF

ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT

READING OF DTR METER WITH

DETAIL SURVEY OF DEFECT IF ANY. A

DULY SIGN COPY BY SURVEYOR

PERSON OF AGENCY IN PRO-FORMA

REPORT SHOULD BE SUBMITTED TO

SDN OFFICE. (DULY FILL PER-FORMA

IN FAULT CONDITION IN WHICH

READING PARAMETER IS NOT SHOWN

INSTALLATION OF DTR METER

INCLUDING METER BOX, PROVIDING &

FIXING OF 1.5SQ MM SINGLE STRAND

10 CORE ARMOURED COPPER CABLE

(3.5METER), TERMINATION IN METER

& COIL ETC.(METER, METER BOX,

C.T./P.T. COIL WILL BE PROVIDED BY

INSTALLATION OF DTR METER

INCLUDING METER BOX,

TERMINATION IN METER & COIL ETC.

(WITHOUT 10CORE COPPER CABLE)

(METER, METER BOX, C.T./P.T. COIL

WILL BE PROVIDED BY DGVCL)

Binding of messanger Conductorat with a

distance not more than 0.75 mtr with

64 9926000064 turns minimum on XLPE Cable with single No

strand binding wire (including cost of

Supply and Installation of 11/22 kV

Distribution Transformers HT Terminal

65 9926000086 protector (UV Resistance) with using PER SET

95/120/150 sq.mm long barrel aluminum

lug. (1Set = 3 Nos i.e. on R, Y, B)

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

Supply & Installation of HT EPR Tap on

11/22 kV Distribution Transformer with

replacement of bare conductor by HT ABC

conductor (DO bottom side to transformer)

after removal of semi conductor by HT

ABC (6 inch both side). HT ABC to be

supplied by DGVCL. (1Set = 3 Nos i.e. on

Supply, Installation, Testing and

Commissioning of Maintenance Free,

Ready Capsule, Pipe-In-Cage (Pic) Type,

67 9926000088 Earth Electrodes for HT Feeder Pole NO

Having 2000 mm Electrode Length as per

the Tender Specifications and Drawing.

(All Materials Will Be Supplied By Agency)

Supply, Installation, Testing and

Commissioning of Maintenance Free,

Ready Capsule, Pipe-In-Cage (Pic) Type,

68 9926000089 Earth Electrodes for HT Feeder Pole NO

Having 3000 mm Electrode Length as per

the Tender Specifications And Drawing.

(All Materials Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI

Strip having hot dip- galvanized-zinc

coating of 80-100 microns without any

joints or welding. Both the end of the GI

strip should be connected with GI nut bolts

and required fabrication work for giving

separate earthing connections to

(1) Neutral of the transformer

(2) MS structures of the transformer

center (Approximately 25 meter GI strip

per transformer centre

- as per requirement and instruction of

Engineer in- charge) (All Materials will be

supplied by Agency)

Supply and Installation of uPVC standard

make Pipe of 1.25" diameter for covering

GI strip with UV protected Cable Ties of

550 X 7.6 mm size to bind with pole

face(Approximately 25 meter uPVC pipe

for GI strip covering per transformer centre

-as per requirement and instruction of

Engineer in-charge.

Supply & fixing of upto 33 kV Conductor

sleeve for Busbar to Drop out Fuse and

Drop out fuse to Transformer H.T.

including Busbar (12 mm sleeve) as per

technical specification. (All Materials will

be supplied by Agency)

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

Supply & fixing of upto 33 kV Conductor

sleeve for Busbar to Drop out Fuse and

Drop out fuse to Transformer H.T. without

72 9926000100 Busbar (12 mm sleeve) as per technical Per TC

specification. (All Materials will be

supplied by Agency)

Supply & fixing of upto 33 kV Conducotr

sleev for Busbar to Drop out Fuse and

Drop out fuse to Transformer H.T.

including Busbar(15 mm sleev) as per

technical specification. (All Materials will

be supplied by Agency)

Supply & fixing of upto 33 kV Conductor

sleeve for Busbar to Drop out Fuse and

Drop out fuse to Transformer H.T. without

Busbar (15 mm sleeve) as per technical

specification. (All Materials will be

supplied by Agency)

Supply & fixing of Disc type Red Color

FRP(Non-flammable) material with

Weather resistant, Non-conductive bird

guard OD=300 MM, ID=33 MM, Width

=1.25 MM, one side cut from ID to OD. (All

Materials will be supplied by Agency)

Providing and fixing of LT Terminal

protectors i.e. Re-useable boot (LT Side

76 9926000096 1.1 kV) including LT (1.1 kV) insulating No

taps. All live part at LT side shall be

covered with fixing of LT insulating taps.

77 Nylon Net around Transformer Center

78 9926000097 Nylon Net (12 * 15 ft) Per Net 850

79 9926000098 Nylon Dori Per TC 200

Labour charge for fitting Nylon Net (All

80 9926000099 fabricated material for fitting nylon net Per TC

shall be provided by DGVCL)

Providing transformer Plinth of various

transformer centres by providing and

fixing RCC block in C.C. (1:2:4) in block of

size 0.60M X 0.30M X 0.15M including

Carting the block at various transformer

centre, lifting the transformer from plinth

by block masonry in C.N. )1:6), placing

transformer in the position of the rising

plinth with all cost of material say cement,

sand, centring etc. labor and curing the

block etc. completely as per instruction of

engineer in charge.

(A) LINE MAINTENANCE

Cutting of Tree branches surounding

1 9924000001 Per Tree

Replacement of old jumpers & providing

2 9924000002 new double jumpers with 8" binding [D No.

Type] & capsuling with PVC pipe etc

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

3 9924000005 Support pole for Stay PSC/STP/RSJ No. 633

Pin binding of conductor 11/22kv Pin

Pin binding of conductor 11/22kv Pin

5 9924000007 insulator per pole in costle area with No.

Pin binding of conductor LT shakel

Replacement of one/both disc.insulator at

Replacement of LT shackle insulator at

9 9924000011 Refixing of V cross Arm No. 61

Replacement of V cross Arm (With

Transportation & Painting)

119924000013 Refixing of Top fitting in proper position No. 41

129924000014 Replacement of Top fitting No. 51

139924000015 Replacement of LT cross Arm No. 105

Providing DO fuse on DP with carting &

jumpuring(ONE DO FUSE)

Numburing of pole with paint by preparing

back ground of one colour and have

lettering(height 3" * width 0.5") using

169924000018 Fixing of MMB(1PH.) at consumer end No. 86

179924000019 Fixing of MMB(3PH.) at consumer end No. 128

Replacement of (1ph.) meter for Urban

Replacement of (1ph.) meter for Rural

painting consumer no. on MMB

209924000022 (Urban) (with letter size height 40mm* No.

painting consumer no. on MMB (Rural)

(with letter size height 40mm* width 8mm)

Replacement of deteriorated Single phase

Fixing of new dist. Box with complete

wiring including clamps,nut bolts etc.

Reparing of guarding involving reshaping

249924000026 of bearer wire cross lacing binding etc. R Mtr.

Painting of steel fabricated material of

RSJ DO DP structure with paint

Painting of steel fabricated material of

269924000028 RSJ pole mounted transformer double No.

pole structure with paint

Painting of steel fabricated material of

RSJ single pole with paint

painting of steel fabricated material of

PSC Single pole (HT line) with paint

painting of steel fabricated material of

PSC DO DP double pole with paint

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

painting of steel fabricated material of

309924000032 PSC double pole at pole mounted No.

transformer with paint

319924000033 Providing line seperater single phase No. 11

329924000034 Providing line seperater three phase No. 31

Replacement / Providing of stay insulator

339924000035 along with adjustment of tension in stay No.

Replacement of deteriorated /providing

349924000036 LT dist. Box with new up to 100KVA No.

capacity & crediting it to store.

Replacement of deteriorated /providing

359924000037 LT dist. Box with new above 100KVA No.

capacity & crediting it to store.

369924000038 Adjustment of tension in stay wire No. 158

379924000039 Refitting of LA No. 31

Converting pin point to Shackle point

389924000040 location

including dismentaling & restringing etc.

replacement of 11KV Pin insulator with

providing new double pin binding

replacement of 22KV Pin insulator by new

409924000042 11kv pin insulator with spares & providing No.

new double pin binding

Providing 11kv double disc insulators with

binding & restringing

Replacement of existing 11kv conductor

429924000045 Cond/KM

(all size) with new double pin binding

Plumbing of PSC Pole with straightening

Plumbing of PSC Pole with straightening

at tension point

Plumbing of tilted DP structure

459924000048 (PSC/RSJ/STP) with refilling of stone No.

Providing new 11kv AB /GO switch with

469924000049 fabrication and insulated colour code Set

jumper, binding, lugs etc

Replacement of old 11kv AB /GO switch

479924000051 with providing new insulated jumper, Set

binding, lugs etc

Providing cage type loop guard in verticle

489924000052 per pole

LT line with using PVC reel insulators etc

Labour charges for replacement /providing

499924000053 of MMB & service with all accessories for No.

three phase connection

Labour charges for replacement /providing

509924000054 of MMB & service with all accessories for No.

single phase connection

Dismentalling of existing Dist.X'mer

center(RSJ /STP POLE) 25/63/100/200

KVA with all fabrication & creditig the old

material to store

52 9924000056 Disconnection from LT pole 1 phase No.

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

54 9924000058 Disconnection from LT pole 3 phase No. 66

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line

from pole & crediting to S/dn (1 ph.)

Dismentaling & removing of service line

from pole & crediting to S/dn (3 ph.)

Reconnection of service line complete with

PVC cable (1 Ph)

Reconnection of service line complete with

PVC cable (3 Ph)

Providing spiral type earthing by G.I. NO

8(weight 2kg -5mtr in length) with salt and

coal 10kg each, including pvc rigid pipe

60 9924000064 20mm dia( 1.5mtr length) to pass exposed No.

part of G.I. wire at consumer end with all

materials, earth resistance should be less

Providing and fixing of signle core 1.5 sq

mm single strand copper insulated cable

with cable nail clip for spiral type earthing

at consumer end. The end of G.I. no 8 is

to be connected by connector with copper

cable of which other end shall be

61 9924000070 connected to the earth terminal of meter per meter

box. This item shall be used in location

where there is more distance between

earth terminal and earthing terminal of

meter. (All materials supplied by

GPS Mapping survey of Existing

Consumer through GPS mapping

62 application. (Only Mahanagarpalika / no

Nagarpalika Area) (. (Excluding

Apartment/ Complex consumers))

GPS Mapping survey of Existing

Consumer through GPS mapping

63 application. (Excluding Mahanagarpalika / no

Nagarpalika Area) . (Excluding

Apartment/ Complex consumers)

DISMENTALING OF ALL TYPE OF

CONDUCTOR FOR 11/22KV & LT LINES

INCLUDING FIXING OF INSULATORS,

BINDING JUMPERING ETC.

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

Stringing of LT ABC of 1*35 SQ MM +

1*25 SQ MM including fitting of all

acessaries i.e. special design suspension

/ tension clamp, fixing of cross arm, LT

shackle insulator etc. for fixing of

messenger wire and inclusive of

dismantling charge of existing bare

conductor and crediting in to store &

dismentaling of service line from LT bare

conductor and to provide service

connection on Aerial Bunch Cable by

insulated pierceing connectors through

service connection box complete as

required & directed by Engineer in

Stringing of LT ABC of 3*50 SQ MM

+1*25 SQ MM+1*35 SQ MM including

fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross

arm, LT shackle insulator etc. for fixing of

messenger wire and inclusive of

dismantling charge of existing bare

conductor and crediting in to store &

dismentaling of service line from LT bare

conductor and to provide service

connection on Aerial Bunch Cable by

insulated pierceing connectors through

service connection box complete as

required & directed by Engineer in

Stringing of 11KV ABC of 3*95 SQ MM

+80 SQ MM including fitting of all

acessaries i.e. special design suspension

/ tension clamp, fixing of cross arm,

binding to pin insulator,preparing shackle

point,jumpers etc. and inclusive of

dismantling charge of existing bare

conductor and crediting in to store

complete as required & directed by

Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM

+95 SQ MM including fitting of all

acessaries i.e. special design suspension

/ tension clamp, fixing of cross arm,

binding to pin insulator,preparing shackle

point,jumpers etc. and inclusive of

dismantling charge of existing bare

conductor and crediting in to store

complete as required & directed by

Engineer in Charge

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

Stringing of LT ABC of 2*50 SQ MM +1*25

SQ MM+ 35 SQ MM including fitting of all

acessaries i.e. special design suspension

/ tension clamp, fixing of cross arm, LT

shackle insulator etc. for fixing of

messenger wire and inclusive of

dismantling charge of existing bare

69 9924000069 conductor and crediting in to store & KM

dismentaling of service line from LT bare

conductor and to provide service

connection on Aerial Bunch Cable by

insulated pierceing connectors through

service connection box complete as

required & directed by Engineer in

Laying,Testing & commissioning of

Specially designed 11 KV 55mm2 AAAC

70 9601000812 Medium Voltage Covered conductor as KM

per the technical specifications (with

Labour charges for Lying of O/H XLPE

cable pole to pole

Supply & fixing of heat shrink type end

terminations (outdoor) for upto 11kV 3C x

72 9925000017 185 mm2 size XLPE cable as per DGVCL No.

technical specification

Supply & fixing of heat shrink type end

terminations (indoor) for upto 11kV 3C x

185 mm2 size XLPE cable as per DGVCL

technical specification)

Providing and fixing of pipe type earthing

from 80 mm dia class-B GI pipe with pit to

be filled with salt & coke and construction

of chamber as per DGVCL Drg. No. dg

74 9925000016 /100 for DP and cable. The earthing pit No.

should be joined with cable by G.I. strip of

size 1” width & 2 mm thick. All material GI

pipe, Coke, Salt etc will be supplied by

Testing of cable at various points and

commissioning the feeder as per

75 9925000025 instruction of engineer-in-charge. Test No.

result shall be submitted by contractor with

Laying,Testing & commissioning

of Specially designed 11 KV AL-

59 ACS Medium Voltage

Covered conductor as per the

technical specifications (with

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

Laying,Testing & commissioning

of Specially designed 11 KV

55mm2 AAAC Medium Voltage

Covered conductor as per the

technical specifications (with

Providing and fixing Green HDPE

pipe ,size 160 mm Dia X 5 mm

thickness X 7 feet height . & GI

clamp size 25 X 3 mm (1 Round

clamp & 2 Nos C -type Clamp

with GI bolts – nuts (10 nos.)

Danger sign sticker with toll free

number of DGVCL embossed

Model:ETP/HDR/17/2

Terminal Size: 25mmX 6mm

With clamp & 2 no’sof M10 size

SS nut & terminal to T/C neutral

using Bolts with connection of

earthling 25X 3mm Hot Dip GI

Transformer/ Earthling 04 Mtr GI

patti)Installation of Earthling PIT

includes supply and

labour for connectionall respect.

Dismental OF 100MM2

AAAC/MVCC CONDUCTOR

Supply and fixing of Suspenssion

clamp to Hold the cable (J-Hook)

TOTAL ESTIMATED AMOUNT OF

Total Amount of Work

Total Amount of Work

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0320/06/2026 Approved Date: 08-06-2026

Note :- All Rates are

Excluding of GST.

1. DGVCL will provide key material like M.S.

materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL

approved drawing and by welding rods confirming to the

relevent ISI specification and as directed by Engineer in

3.Necessary electricity connection for fabrictated items

shall be provided by DGVCL on payment of required

charge for connection & electricity bill of the same shall be

paid by the agency.

4.All the rates are inclusive of PF and Exclusive of GST

applicable time to time.

5.All steel material are to be painted as below: Executive Engineer

(a) Scrubbing of rusted surface properly before applying DGVCL

the paints on to the RSJ poles & steel fabricated materials

Kim Ind Division

of RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is

to be properly painted for the RSJ poles & steel fabricated

materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple

mangoes or equivalent quality silver paint) is to be properly

painted on to the RSJ poles & steel fabricated materials of

6. Qualified bidder has to work of TC HT booting, sleeve

for Busbar to Drop out fuse to Transformer H.T, Raising of

Plinth and maintenance of Overhead line under

File No: DGVCLDOKI/TEN/e-file/6817/2026/2943/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI