CONSTRUCTION WORK OF WIDENING AND STRENGTHENING OF KALYANPUR- AIRIYA-KISANGANJ-BHAGWANPUR -MAHSI TAHSIL ROAD (ODR) FROM CHAINAGE 0.000 TO 21.400 (LENGTH 21.400 KM) IN BAHRAICH DISTRICT FINANCIAL YEAR 2025-26 VIDHAN SABHA-MAHSI WITH 05 YEAR MAINTENAN

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with in all lifts and lead upto 1000m. [MORTH Ref. SI No. 3.06 - 301.]

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.[MORTH Ref. SI No. 3.19 - 305.]

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.[MORTH Ref. SI No. 3.16 - 305.] (Local Earth)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. [MORTH Ref. SI No. 3.16 - 305.] (Carted Earth)

Granular Sub-base (Grading-I) By Mix in Place Method :- Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 [MORTH Ref. SI No. 4.01 B - 401.]

Wet Mix Macadam :- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. [MORTH Ref. SI No. 4.14 B - 406.]

Prime Coat over WMM :- Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. [MORTH Ref. SI No. 5.01 - 502.] (Including cost of Emulsion SS-1)

Tack Coat :- Providing and applying tack coat with bitumen(VG 10) using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.[MORTH Ref. SI No. 5.02 - 503.] ( Including cost of Bitumen VG -10 )

Dense Graded Bituminous Macadam Grading II :- Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. [MORTH Ref. SI No. 5.04 B - 505.]( Including cost of Bitumen VG -30 )

Bituminous Concrete Grading II :- Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder(VG 30) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. [MORTH Ref. SI No. 5.05 B - 507.] ( Including cost of Bitumen VG -30 )

Cement Concrete Pavement( P.Q.C. M35 Grade) :- Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longi

Providing and Laying Reinforced Cement Concrete Pipe NP4 for culverts on first class bedding of granular material in single Row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head parapets Clause 1106. [PWD SOR CH-20/10 + CH-1] (450 mm Dia)

Providing and Laying Reinforced Cement Concrete Pipe NP4 for culverts on first class bedding of granular material in Two Row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head parapets Clause 1106. [PWD SOR CH-20/10 + CH-1] (600 mm Dia)

Providing and Laying Reinforced Cement Concrete Pipe NP4 for culverts on first class bedding of granular material in Three Row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head parapets Clause 1106. [PWD SOR CH-20/10 + CH-1] (1000 mm Dia)

Please Enable Macros to View BoQ information