Ward-05,Thrikkakara Municipality-Construction of Athani-Mundampalam road footpath,5th- reach

Amount

footpath

2.14.2.A:Dismantling of Flexible Pavements<br> Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 <br> (II) By Mechanical Means<br> (A) Bituminous Courses

3.5.1:Excavation in Cutting in Soil by manual means with lead upto 50 m <br> Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

11.4.1.1:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 <br> I. P.C.C grade M 10 <br> (i) Nominal mix 1:3:6

OD64882/2022-2023:Providing & Laying at or near ground level factory made kerbstone of M25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand), including making joints with or without grooves ( thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-incharge.(Length of finished kerb edging shall be measured for payment).(Precast CC kerb stone shall be approved by Engineer in Charge)

OD64883/2022-2023:od1_648679/2022_2023: Engaging Man coolies

OD64879/2022-2023:Providing and laying tactile tile (For vision impaired persons as per standards) of size 300 x 300 x 60mm having with water absorption less than 0.5% and conforming to IS:15622of approved make in all coloures and shades in for out door floor such as footpath, courtyard, multi model locations etc. laid on 6mm metal having thickness of 5mm IN ALL SHAPES AND PATTERNS INCLUDING GROUTING THE JOINTS WITH WHITE CEMENT MIXED WITH MATCHING PIGMENTS ETC. Complete as per direction of Engineer in Charge

OD64880/2022-2023:Supplying and laying interlocking tile 60mm or nearest size thickness, minimum strength M30 including providing a layer of 6mm aggregate of 5cm thickness, then laying interlock cobbles in lines and levels as per the direction of the departmental officers at site inclusive of all cost & Conveyance charges etc. Complete

11.4.2.2:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203<br>II. P.C.C grade M 15 <br> (ii) Nominal mix 1:2.5:5 (Hand mixing)

OD64884/2022-2023:od27_648679/2020_2021: Steel work welded in built up sections/framed work, including cutting, hoisting,<br>fixing in position and applying a priming coat of approved steel primer using<br>structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works<br>

10.6:Painting on Steel Surfaces <br> Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

OD64901/2022-2023:od35_648679/2021_2022: Providing and Laying of Interlocking Concrete Block Pavements using 80 mm M40<br>hydraulic blocks of approved size, design & shape, laid in required pattern over and including a compacted<br>bed of 6mm stone aggregate of 50mm average thickness, etc. all complete as per the direction of Engineerin-<br>charge.<br>

10.5:Painting Two Coats on New Concrete Surfaces <br> Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701

75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

pvc pipe

19.18.1:Supplying and fixing C.I with out frame for manholes:455 x 610 mm rectangular C.I cover ( light duty ) the weight of the cover to be no less than 23 kg

19.21.1:Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix( 1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete.For pipes 100 to 250 mm diameter

50.18.8.9.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

E K KAREEM

Bidder Name

EKM CONSTRUCTIONS

E K KAREEM