CONSTRUCTION OF PHYSIOTHERAPY CENTER AT F.P.NO :- 122, T.P.NO :- 33 (GOTA) IN CHANDLODIYA WARD, NORTH WEST ZONE, AHMEDABAD

BILL OF QUANTITY

Name of Work:- CONSTRUCTION OF PHYSIOTHERAPY CENTER AT F.P.NO :- 122, T.P.NO :-

(GOTA) IN CHANDLODIYA WARD, NORTH WEST ZONE

Sr. Unit Rate Amount

Civil Work Estimate

1 Demolition & Dismantling work

Demolition of RCC work using Hydra Breacker including

stacking of servicable materials and disposal of unservicable

materials with all lead and lift.Removal Of Existing Building

Foundation and Super Structure If Any. 1047.38 Cu.M.

Demolition of Brick work and stone masonry including

stacking of serviceable materials and disposal of

b 3.00 unserviceable materials with all lead and lift.(ii) In Cement

Mortar.Removal Of Existing Building Foundation and Super

Structure If Any. 544.95 Cu.M.

Dismentaling of sheet roofing including ridges, Hips, Valleys,

c Gutters etc. stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift.

1.1 2.00 (i) G.I.sheet roofing. 47.25 Sq.mt

1.2 2.00 (ii) A.C. sheet roofing. 53.55 sq.mt

Dismentling steel work including distempering and stacking

the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, hold fasts and

other attachment etc. complete and stacking them with in all

lead and lift. (i)Notexceeding 3 Sq.M. in area. 185.85 Each

Removing & Scrapping of Old deteriorated Plaster of any

thickness from Masonary / R.C.C. member including stacking

of serviceable material & disposal of un serviceable from site

of work with all lead & lift. 19.38 Sq.M.

Dismentaling any type tiled of stone floors laid in mortar

g 50.00 including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. 47.25 Sq.M.

2 Excavation for foundation including sorting out stacking of

useful material & disposing of excavated stuff upto 50 mt.

lead. Loose & Soft soil.Excexuted With Mechanical Effort

a 693 up to 1.5 mt. depth 115.92 Cu.M.

b 693 1.5 to 3.0 mt. depth. 128.52 Cu.M.

c 31 3.0 to 5.0 mt. depth 141.11 Cu.M.

d 500.00 Add extra for Disposing off the excavated stuff of above

items for lead of (A) 50 m to 100 m 17.28 Cu.M.

e 200.00 Add extra for Disposing off the excavated stuff of above

items for lead of (B) 100 m to 200 m 34.56 Cu.M.

f 50.00 Add extra for Disposing off the excavated stuff of above

items for lead of (C) 200 m to 300 m 51.84 Cu.M.

g 50.00 Add extra for Disposing off the excavated stuff of above

items for lead of (D) 300 m to 400 m 76.8 Cu.M.

h 50.00 Add extra for Disposing off the excavated stuff of above

items for lead of (E) 400 m to 500 m 128 Cu.M.

i Providing and installing cast in situ single under reamed piles

of specified diameter and length below pile cap, excluding the

cost of Concrete, steel reinforcement but including the cost of

boring with bentonite solution and the length of the pile to be

embedded in pile cap etc. all complete. (Length of pile for

payment shall be measured upto to the bottom of pile cap) :

1.1 10.00 400 mm dia. Piles 638.83 Rmt.

1.2 10.00 450 mm dia. Piles 705.03 Rmt.

j Extra over single under ream for providing additional bulbs in

under reamed piles, under specified diameter excluding the

cost of Concrete, steel reinforcement (only the nos. of extra

bulbs are to be paid).

1.1 1.00 400 mm dia. Piles 813.05 Each

1.2 1.00 450 mm dia. Piles 1103.43 Each

3a 1 Provdg. & laying cement concrete 1:5:10 (1 cement :

course sand : 10 hand broken aggregates 40 mm nominal

size) and curing complete, excluding cost of form work in

foundation & Plinth. 2492.51 Cu.M.

3b Provdg. & laying cement concrete 1:3:6 (1 cement : 3 coarse

sand : 6 hand broken stone aggregates 40 mm nominal size)

and curing complete excluding cost of form work in

170.00 (A) Foundation and plinth 2976.00 Cu.M.

3c 5 Supplying of graded hand brocken stone size of 90 mm to

127 mm at site (Rubble or Spoul)

3d 20 Labour charges for spreading the spouls 90 mm to 127 mm

thick layer good earth filling in voids correcting the grade &

camber comp. with rolling, watering, incl. preparing

thesurface by brushing for removing all loose or dirts

ect.comp. 26.79 Sq.mt.

4 2.00 Provdg. & laying cement concrete 1:4:8 (1 cement : 4 coarse

sand : 8 hand broken stone aggregates 40 mm nominal size)

and curing complete excluding cost of form work in

foundation& plinth. 2653.67 Cu.M.

5 1800 Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding

cm. in depth consolidation each deposited layer by ramming

and watering. 129.10 Cu.M.

6 Conveyance charges of earth lime, murrum, building

rubbish, manure, garbage, sludge, excavated rock, fly

ash, aggregate of any kind etc. comp.

a 200.00 Conveyance charges upto 1 km 320.2 Cmt

b 100.00 Conveyance charges upto 2 km 347.73 Cmt

c 500.00 Conveyance charges upto 5 km 408.41 Cmt

d 100.00 Extra For Lead on Above Item Above 5 km & upto

e 100.00 Extra For Lead on Above Item Above 6 km & upto

f 100.00 Extra For Lead on Above Item Above 7 km & upto

g 100.00 Extra For Lead on Above Item Above 8 km & upto

h 100.00 Extra For Lead on Above Item Above 9 km 9.26 Cmt

7a 9 Filling in plinth with sand under floors including watering,

ramming, consolidating, compacting and dressing etc.

7b 68.00 Filling in foundation and plinth with murrum or selected soil in

layers of 20 cm. thickness including watering, ramming and

consolidating etc. Complete. 286.2 Cmt

8 Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg/Sq. cm. in cement

mortar 1:6 (1 cement : 6 fine sand) conventional brick

a 18 (a) in foundation & Plinth 3981.21 Cu.M.

b 106.00 Super structure Upto Floor Two Level

c 2.00 Super structure Above Floor Two Level

9 I.Half brick masonry in common burnt clay building bricks

having crushing strength note less than 35 Kg/Sq. Cm. in

cement mortar 1:4 (1 cement : 4 coarse sand) using

conventional brick in Super structure upto floor Four level

a 70.00 All Floor Level 646.7 Sq.M.

10.1 Providing and laying controlled cement concrete of M-25

Grade and curing complete, Excluding the cost of form work,

Scaffolding, cost of reinforcement for reinforced concrete

work For any Height up to any FloorLevel.

a 1.00 Foundations,Raft,Footings,Mass concrete 4238.04 Cu.M.

b1 1.00 RCC Retaining wall at All Floor 4519.88 Cu.M.

c1 Tie-Beam, Lintel , Beam- Bracket, Stair Case & Landing,

Coping ,Slab, balcony, weather shed, loft , any cantilever etc

1.00 All Floor 4496.07 Cu.M.

d1 1.00 Columns,Pillars, posts and struts at All Floor 4593.91 Cu.M.

10.2 Providing and laying controlled cement concrete of M-20

Grade and curing complete, Excluding the cost of form work,

Scaffolding, cost of reinforcement for reinforced concrete

work For any Height up to Floor Four Level.

a 1.00 Foundations,Raft,Footings,Mass concrete 3977.88 Cu.M.

Tie Beam , Lintel , Beam- Bracket , Coping ,landing, Slab,

balcony, weather shed, loft , any cantilever etc at All Floor

c1 2.00 Column at All Floor 4558.2 Cu.M.

d1 1.00 Stair Case All Floor 5418.91 Cu.M.

Providing and laying in position Ready Mixed M250 grade

concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in

transit mixer for all lead having continuous agitated mixer,

manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of

R.M.C. from transit mixer to site of laying with all lead and lift,

excluding the cost of centering shuttering finishing and

reinforcement including cost of admixtures in recommended

proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in charge. Without

Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 450 kg )

Providing and laying in position Ready Mixed M200 grade

concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in

transit mixer for all lead having continuous agitated mixer,

manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of

R.M.C. from transit mixer to site of laying with all lead and

lift, excluding the cost of centering shuttering finishing and

reinforcement including cost of admixtures in recommended

proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in charge. Without

Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 400 kg )

10.5 Drilling suitable holes in reinforced or plain cement concrete

with power driven drill machine to a minimum depth of 80mm

upto 250mm in RCC beams, lintels, columns and slabs to

introduce steel bars for sunshades/balconies including fixing

the steel bars in position using Hilti Chemical HY200-R but

excluding the cost of reinforcement, all complete as per

direction of Engineer-In-Charge.

a 50.00 8 mm Dia in 80 mm Deep & 12 mm Dia Drilling 183.52 Each

b 120.00 10 mm Dia in 100 mm Deep & 14 mm Dia Drilling 263.66 Each

c 120.00 12 mm Dia in 120 mm Deep & 16 mm Dia Drilling 343.80 Each

d 10.00 16 mm Dia in 160 mm Deep & 20 mm Dia Drilling 608.63 Each

e 10.00 20 mm Dia in 200 mm Deep & 25 mm Dia Drilling 1024.44 Each

f 5.00 25 mm Dia in 250 mm Deep & 32 mm Dia Drilling 1938.54 Each

11 Providing and laying controlled cement concrete 1:2:4(

1cement : 2 coarse sand : 4 Graded stone aggregate 20 mm

nominal size ) and curing complete, Excluding the cost of

form work and reinforcement for reinforced concrete work in:

a 1.00 Foundations, footings, base of columns,grade slab and

mass concrete. 3923.53 Cu.M.

b 1 slab, landing shelves, Balconies, lintels, beams, girders, and

cantilever, up to aany floor level. 4012.47 Cu.M.

c 510.00 P/A Trimix with dewatering machine and floater machine on

constructed R.C.C. work incl. cost of machine and labour etc.

comp. as directed. 54 Sqmtr

d 170.00 Making 15 mm Groove in R.C.C work on road and filling it

with poly sulfied selant and finished it good incl. all labour

charges etc. comp. as directed 30 Rmt

9.00 Providing and laying and fixing 25 mm thick expansion joint

by hydrocell semi rigid UV resistance with high performance

laminated closed cell polythene foam joint filler in sheet foam

as directed, etc. complete. 738.13 Sqmt

12 Providing form work in ordinary timber planking so as to give

a rough finish including centering, shuttering, strutting and

propping etc. height of propping and centering below

supporting floor to celling not exceeding 4 M & removal of the

same for in situ reinforced or plain concrete work in

a 304.00 (A) Foundation, footings, bases of columns etc. and mass

concrete. 171.68 Smt

b 340.00 (B) Flat surface such as soffits of slabs, landing and the like

c 184.00 (C) Vertical surfaces such as walls (any thickness) partitions.

(D) Columns, pillars, posts & struts.

d 394.00 (1) Square, rectangular, polygonal in plan 297.68 Smt

e 20.00 (2) Circular or curved in plan. 422.1 Smt

f 533.00 (H) (1) Sides and soffits of beam, haunchings cantilevers,

girders, bressumers, Coping and lintels not exceeding 1 M in

depth. 192.15 Smt

g 10.00 (2) Sides and soffits of beam, haunchings cantilevers,

girders, bressumers and lintels exceeding 1 M in depth. 259.88 Smt

h 17.00 (L) chullah hoops, weather sheds, chhajas, carbels etc

including edges. 155.78 Smt

i 50.00 (M) Staircase with-sloping or stepped soffits incl. risers &

strings excluding landing. 242.55 Smt

j 50.00 Extra for additional height of propping and centering where

the height of propping and centering exceeds 4 .O M

between supporting floor to ceiling including temporary brick

or stone pillars for supporting as required. (i)Height more

than 4.0 M.and upto 5.0 M. 386.48 Smt

13 Providing T.M.T Fe 500D bar reinforcement for R.C.C. work

including bending, binding and placing in position complete

up to any floor level..

a 42595.0 All Floor Level 75.46 Kg.

14 20.00 Providing and laying polished Kota stone slab (Polished /

River Finish, Green colour ) flooring over 20 mm. (average)

thick base of cement mortar 1:6 (1 cement : 6 coarse sand)

or lime mortar 1:1.5 laid over and joined with grey cement

slurry including rubbing and polishing complete.25 mm th.

15 12.00 Providing and laying polished Kota stone slab 25 mm. thick in

Platform ,Riser of Stair , Skirting, Tread , dado and pillars laid

on 10 mm. thick cement mortar 1:3 (1 cement : 3 coarse

sand) jointed with grey cement slurry including rubbing and

polishing and MAking groove where it is Required etc. compl

16 5.00 Providing and laying white/Colur glazed tiles 6 mm thick in

flooring treads of steps and landing laid on a bed of 12 mm

thick cement mortar 1:3 (1 cement : 3 coarse sand) finished

with flush pointing in white cement. 908.17 Sq. M.

17 103.00 Providing and layingWhite / Colour glazed tiles of size

mmx300mm x 8 mm / 300 mmx 450mm x 8 mm in skirting,

risers of steps, Floor and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

cement slurry. 1426.95 Sq. M.

18 2.00 Providing and laying marble stone slab flooring over 20 mm.

(Average) base of cement mortar 1:6 (1 cement: 6 coarse

sand) or L.M. 1:1.5 laid and jointed with grey cement slurry

including rubbing and polishing complete: (A) Marble slab

mm. thick. 2194.63 Sq. M.

19a 10.0 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24''

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-coarse sand) finishing

with flush pointing in white cement. 1062.5 Sq. M.

19b 3.0 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24''

in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1cement : 3-coarse sand) and jointed with white

cement slurry 1130.15 Sq. M.

19c 27.0 P & L 24" x 24" vitrified 8 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 ( 1cement:

coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for

Antiskid 1383.99 Sq.M.

19d 230.0 Providing and laying Vitrified tiles in floor in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade,

laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse

sand) jointing with grey cement slurry @3.3 kg/sqm including

grouting the joints with white cement and matching pigments

etc. The tiles must be cut with the zero chipping diamond

cutter only. Laying of tiles will be done with the notch trowel,

plier, wedge, clips of required thickness, leveling system and

rubber mallet for placing the tilles gently and easily.

Double Charge Vitrified Tile Polished Finish of Size 600 x

19e 238.0 Providing and laying Vitrified tiles in different sizes (thickness

to be specified by the manufacturer), with water absorption

less than 0.08% and conforming to IS: 15622, of approved

brand & manufacturer, in all colours and shade, in skirting,

riser of steps, laid with cement based high polymer modified

quick set tile adhesive (water based) conforming to IS:

15477, in average 6 mm thickness, including grouting of

joints (Payment for grouting of joints to be made separately).

Tile Size 600 x 600 mm

19f Grouting the joints of flooring tiles having joints of 3 mm

width, using epoxy grout mix of 0.70 kg of organic coated

filler of desired shade (0.10 kg of hardener and 0.20 kg of

resin per kg), including filling / grouting and finishing

complete as per direction of Engineer-in-charge

19.f.1 238.0 For Tile Size 600 x 600 mm 254.84 Sq.M.

20 5.0 Providing and laying Ceramics tiles 6 to 8 mm thick in

flooring, treads of steps, landing and dedo on 12 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) and jointed

with white cement slurry. 960.47 Sq. M.

21 185.00 Providing & Laying 18 mm thick Mirror polish granite For

flooring , counter , stair -riser , tread , skirting , dedo , Jambs

etc. machine cut or chiselled on bed of cement mortar 1:1

pointing with neat cement slurry incl. moulding, Making

grooves where it is required etc. comp. as per instruction of

engineer in charge. 2385.71 Sq. M.

22a Provdg. 20 mm. thick Finish / Mala cement plaster in single

coat on fair side of brick / concrete walls for interior plastering

upto any Floor level and finished even and smooth in

i 614.00 All Floor Level 190.58 Sq.M.

b Provdg. 20 mm. thick Finish / Mala cement plaster in single

coat plastering on ceilings, Beam side and sofits of stairs

upto any Floor level and finished even and smooth in

i 329.00 All Floor Level 215.15 Sq.M.

c 115.00 Providing & fixing 23 cm wide chicken mesh jali with nails &

then application of 15 mm plaster on R.C.C. & masonary

joints as per dir. of engg. In charge. 292.59 Sq.mt

d 100.00 Providing and mixing water proofing materials in cement Per Bag

mortar in proportion recommended by the manufacturer. etc. of 50 Kg

comp. as per instruction of engineer in charge. of

23a 467.00 Providing 20 mm th. Double coat Sand face / Mala Cement

Plaster on Walls upto any Height Above Ground level

consisting of 12 mm th. Backing coat of C.M. 1:3 ( 1 cement :

3 Ssand ) & 8 mm th. Finishing coat of C.M. 1:1 ( 1 cement :

1 sand ) ets. Complete. 297.68 Sq.M.

24a 15.00 White / Color washing with lime on undecorated wall surfaces

(two coats) to give an even shade including thoroughly

brooming the surface to remove all dirt, dust mortar drops

and other foreign matter. 12.29 Sq.M.

24b 450.00 Providing & Applying 3 mm thick External Wall Rustic Type

Texture as per Design & Make as Approved by Consultants

/ Engineer in Charge. Work Includes All Necessary

Scaffolding Work upto Any Height. 424.92 Sq.M.

24 c 450.00 Finishing walls with Acrylic Smooth exterior paint of required

shade :New work (Two or more coat applied @ 1.67 ltr/10

sqm over and including priming coat of exterior primer

applied @ 2.20 kg/10 sqm) 174.97 Sq.M.

24d 10.00 P./L. METALIC HERITAGE SURFACE TEXTURE

Providing and fixing of HERITAGE textured homogeneous

wall finishing system from BAKELITE HYLAM LTD or

equivalent make consisting of a two component system of

(25 kgs per Pack) made of 92% silica particles coated with

fade resistant pigments, 100% acrylic polymer bonding agent

(5kgs per pack) with the applied thickness of the coating

being between 0.8mm-1.2mm to be applied on acured,

smooth level plaster without keying, as per the

shades/combinations approved, as per the manufacturer

directions, for usages, tobe applied by an approved

applicator of the manufacturer, as per the directions /

supervision of the engineers in charge, all complete. Includes

All Necessary Scaffolding Work upto Any Height.

24e 30.00 Providing and Fixing 18 mm thick concrete base

exposed brick cladding including surface waterproffing,

polymer modified tile adhesive and polymer modifies

tile grout ( grey / white) with neccesary scafolding etc

compl. As per direction of engg. Incharge.

25a 400.00 Wall Painting (two coats) with plastic emulsion / Oil paint of

approved brand and manufacture and of shade required on

undecorated wall surfaces to give an even shade, over and

including a priming coat with alkali resistance primer of

approved brand and manufacture after thoroughly brushing

the surface free from mortar droppings, and other foreign

matter and also including preparing the surface even and

sand -papered smooth 78.44 Sq.M.

b 400.00 Extra over above item for every subsequent coat of of wall

painting with plastic emulsion / Oil paint of approved brand.

c 400.00 Applying two coats of Birla (white cement based) or Asian

(acrylic lapy-putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth. 40.19 Sq.M.

26 Providing & Laying & Jointing glazed stoneware pipes incl.

excavation up to 2.0 mt.,refilling, trasporting the pipe to work

site, unloading, lowering in trenches, laying and jointing the

pipes in c.m. 1:1 incl. all jointing materials such as cement,

sand, hemp, bitumen as dire. testing the pipe line to a head

of 1.5 mt. and hydraulic test as dire incl. watering trenches,

spreading , and carting away of surplus earth within

mt.lead as dire. etc. comp.

a 70.00 23 cm dia. 344.64 Rmt

Providing & Laying & Jointing glazed stoneware pipes incl.

excavation up to 2.0 mt.,refilling, trasporting the pipe to work

site, unloading, lowering in trenches, laying and jointing the

pipes in c.m. 1:1 incl. all jointing materials such as cement,

sand, hemp, bitumen as dire. testing the pipe line to a head

of 1.5 mt. and hydraulic test as dire incl. watering trenches,

spreading , and carting away of surplus earth within

mt.lead as dire. etc. comp.

b 25.00 15 cm dia. 288.23 Rmt

c 15.00 10 cm dia. 211.05 Rmt

27 7.00 Constructing brick masonry chamber for under ground C.I.

Inspection chamber and bends with bricks having croshing

strength not less than 35 Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Lightduty) 455mm x 610 mm intenal dimensions total

weight of cover with frame to be not less than 38 Kg. (Wt. of

cover 23Kg.) and Wt. of frame 15Kg.) (R.C.C.top slab with

1:2:4 mix (1-cement:2-coarse sand:4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15 mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455 mm x 610 mm and

up to 850 mm deep

28 a 3.00 Constructing Manhole with R.C.C. top slab in 1:2:4mix (1-

cement: 2-coarse sand:4-graded stone aggregate 20 mm

nominal size) foundation concrete 1:3:6 mix (1-cement:3-

coarse sand:6-Brick bats 40+50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement:5-coarse

sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement:2 -Coarse

sand:4-stone aggregate 20 mm nominal size) finished

smooth complete including curing and festing (i) Inside size

900mm x 1200mm and up to 1.5M. deep including C.I. cover

with frame size 560 mm diameter total weight of cover and

frame to be not less than 128kgs. (Wt. of cover 64Kg. and

Wt. of frame 64Kg.) (A) With 230 mm thick walls of brick

masonry using brick having crushing strength not less than

35Kg./Sq.cm. in Cement Mortar 1:5 (1-Cement: 5-Coarse

sand) (2)B type depth up to 1.50 Metre

29a 4.00 Providing and fixing white vitreous china flat back or wall

corner type lipped front urinal basin of 340x280x470 mm

sizes respectively with standard flush pipe, Waster Pipe,

Waste Coupling, PVc Connection and G.I clamps complete,

including painting of fittings and brackets, cutting and making

good the walls and floors wherever required : Cera Model No.

S4020103 or Equivalent 3344.35 No.

b 25.00 Providing and Fixing of C.P. Brass BIB Cock of 15 mm Dia

of Jaquar make florentine series model no. 5047n or

equivalent make with all necessary fittings. as approved by

Engineer - in - charge., 1564.17 No.

c 25.00 Providing and fixing brass screw down Angle stop tap.(A)

15mm dia. Of Jaquar make florentine series modelno. 5053n

or equivalent make with all necessary fittings. as approved

by Engineer - in - charge., 1160.57 No.

d 1.00 Providing and fixing C.P. brass shower rose with 15mm or

20mm inlet Shower Arm.(A) 100mm dia. Each

e 2.00 Provding and Fixing of autoclosing pressmatic pillar cock /

bib cock with all necessary fittings of Polished Bright Chrome

Finish of Jaquar make model no. 031L65 or equivalent make

as approved by Engineer in Charge. Rate including of cost of

labour, material etc. in complete manner. 3280.52 No.

f 4.00 Providing and Fixing of C.P. Brass Two Way Bib Cock of

mm Dia of Jaquar make model no. 041kn or equivalent

make approved make with all necessary fittings. as approved

by Engineer - in - charge., 1411.58 No.

g 4.00 Providing and Fixing of C.P. Brass urinal Valve Auto Closing

System With Full Built in Control Cock & Wall Flange of

mm Dia of Jaquar make model no. 077 or equivalent make

approved make with all necessary fittings. as approved by

Engineer - in - charge., 2568.08 No.

30 5.00 Provdg. & laying S.W. Gully trap with C.I. garting brick

masonry chamber & water tight C.I. cover with frame of

mm x 300 mm size ( inside) with standard weight. sqare

mouth trap size 150 x100 mm P trap 1234.57 No.

31 4000.00 Providing erecting and fixing double coated ISI water tank of

required capacity each with all necessary fittings and

connection etc. complete on terrace 3.91 Litre

32 20.00 Extra rate over item of excavation of earth for excavation of

asphalt pavement/RCC of thickness up to 0.20 meter

including demolishing the asphalt carpet, metal, soiling /

cutting Reinforcement etc.comp. with stacking the material

as directed.-up to 0.20 meter thickness

33 7.00 Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

100 mm diameter with jali of the following nominal diameter

of self cleansing design with C.I scread down or hinged

grating including the cost of cutting and making good the

walls. 565.43 No.

34a Provdg. And fixing Concealed / Open to wall, ceiling & floor in

true line and level UPVC pipe Schedule- 40 of make as

approved by engg. incharge. pipe shall be fix on wall with the

help of clamp at every twi meter center to center of shall be

concealed as directed in cluding neccesarry fitting etc. in

cluding testing of pipe and jointd and fixing the same with

adhesive solvent , including cost of all materials of following

iii 10.00 32 mm 117.97 Rmt

34b Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good

the wall, ceiling and floor etc. complete

iii 5.00 25 mm 247.25 Rmt

35 Provdg. And fixing to wall ,ceiling and floor 10.00 kg.

F/Sq.Cm2 working pressure polythelene pipes of the

following outside diameter, low, density, complete with

special flange compression type fittings, wall clips etc.

making good wall ceiling and floor.

b 20.00 (A) 75mm dia 274.68 Rmt

36 2.00 Providing and fixing water closet squatting Pan ( Indian type

W.C. Pan) size 580mm (A)VitreousChina. (I)Long pattern =

White colour with Trap and Pair of Foot Rest

37a 2.00 Providing and fixing white vitreous china extended wall

mounting water closet of Cera Make S1043101 Carat Model

Or Equivalent Model With EWC Soft Close Seat Cover, Chair

Bracket, nuts, bolts and gasket etc complete. 12613.27 No.

b 4.00 Providing and Fixing of C.P. Brass Flush Cock of 25 mm Dia

of Jaquar make model no. 081 or equivalent and Outer Body

of Jaquar make model no. 5083KPM or equivalent approved

make with all necessary fittings. as approved by Engineer - in

- charge., 2732.58 No.

c 2.00 Providing and fixing Health Faucet of Jaquar make model

no. 573 oe equivalent make as approved by engg. In charge

with flexible tube upto 1 metre long etc. complete. 1543.36 No.

38a 1.00 Providing and fixing 24"x18"x8" Carysil Elegance or

Equivalent Make of Single Bowl Sink S.S. Matt Finish With

Waste Coupling, Waste Pipe,etc. cutting and making good

the walls wherever required. 7960.49 No.

b 1.00 Providing and fixing Under counter Wash basine including

mm C.P. Brass Pillar tap, 32 mm C.P. Brass Waste of

Standard make, Cutting & Making good the wall / granite

Wherever Required in White Color : Model S2030101 of

Cera Clair Series or Equivalent make Wash basine of size :

c 3.00 Providing and fixing Wall Hung wash basin Including 32 mm

C.P. brass waste of standard pattern, cutting and making

good the walls / granite wherever require:In White Color :

Cera Cadal Or Equivalent Make Wash basin of size 515 x

39a 3.00 Provdg. & fixing 600mm x 450 mm Bevelled edge mirror of

superior glass mounted of .6 mm th. A.C. sheet or plywood

sheet and fixed to wooden pluge with C.P. brass screws and

washers. 825.48 No.

b 10.00 Providing and fixing mirror of superior glass (of approved

quality) and of required shape and size with plastic moulded

frame of approved make and shade with 6 mm thick hard

board backing : Rectangular shape 1500x450 mm

40 3.00 Provdg. & fixing C.P..Brass towal rail complete with C.P.

brass brackets fixed to wooden plugs with C.P. Brass

screws.(600 mmx 20 mm size)

41 Providing and fixing ball valve (brass) of approved quality,

High or low pressure, with plastic floats complete :

ii 1.00 20 mm dia 1099.94 No.

iii 4.00 25 mm dia 1552.93 No.

iv 2.00 40 mm dia 3312.60 No.

42a Providing and fixing Full Way valve (HEX) with wheel of

approved quality :

i 2.00 15 mm Full Way valve (HEX) 1461.17 No.

ii 1.00 20 mm Full Way valve (HEX) 1924.61 No.

iii 4.00 25 mm Full Way valve (HEX) 2535.55 No.

iv 1.00 32 mm Full Way valve (HEX) 3377.64 No.

v 2.00 40 mm Full Way valve (HEX) 4661.10 No.

vi 1.00 50 mm Full Way valve (HEX) 6675.14 No.

43a 1.00 Providing and Fixing of C.P.Brass Pillar Cock of 15 mm Dia

of approved make with all necessary fittings. as approved by

Engineer - in - charge., 1725.21 No.

b 1.00 Providing fixing of SS grab bar with all hardwares for

Physically Handicap toilet. 1937.24 No.

44a 280.00 Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc consisting of

following operations: 1150.48 Sq.M.

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm

of cement admixed with water proofing compound

conforming to IS. 2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls upto 300 mm

height including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick

bats 25 mm to 115 mm size with 50% of cement mortar 1:5

(1 cement : 5 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by

Engineer-in-charge over 20 mm thick layer of cement mortar

of mix 1:5 (1 cement :5 coarse sand ) admixed with water

proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge to required slope and treating similarly

the adjoining walls upto 300 mm height including rounding of

junctions of walls and slabs.

(c) After two days of proper curing applying a second coat of

cement slurry using 2.75 kg/ sqm of cement admixed with

water proofing compound conforming to IS : 2645 and

approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick jointless cement

mortar of mix 1:4 (1 cement :4 coarse sand) admixed with

water proofing compound conforming to IS : 2645 and

approved by Engineerin- charge

(e) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing and for final

test.“All above operations to be done in order and as directed

and specified by the Engineer-in-Charge :and shall be

guaranteed for minimum period of 10 years after handing

over the completed building by the main contractor to be

finished as directed. Stamp paper guarantee 10 years to be

furnished before receiving any payment from the client.

With average thickness of 120 mm and minimum thickness

at khurra as 65 mm.

b 280.00 Providing and laying broken chine mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be

laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water and oxalic

acid etc. as directed. 739.89 Sq. M.

c 210.00 Providing and applying fibre reinforced elastomeric liquid

water proofing membrane with resilient acrylic polymers

having Sun Reflectivity Index (SRI) of 105 on top of concrete

roof in three coats @10.76 litre/ 10 sqm. One coat of self-

priming of elastomeric waterproofing liquid (dilution with

water in the ratio of 3:1) and two coats of undiluted

elastomeric waterproofing liquid (dry film thickness of

complete application/system not less than 500 microns). The

operation shall be carried out after scrapping and properly

cleaning the surface to remove loose particles with wire

brushes, complete in all respect as per the direction of

Engineer-in-Charge. 562.4 Sq. M.

d 11.00 Filling in Sunken Portion with good Quality Aerated light

weight concrete block having crushing strength not less than

35 kg/sqcm and where directed by the Architect / Engineer-in-

charge, in sunk in layer. including watering, ramming where it

is required etc. complete, as directed by the Architect /

Engineer-in-charge . 4559.61 Cmt

45 30.00 Providing and laying cement concrete flooring ( I.P.S.) 1:2:4

(1-cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

46a 2500.00 Providing and fixing M.S. grills/ Gate of required pattern to

wooden/ Granite frames of windows etc. with M.S. flats at

required spacings and frame alround, square or round bars

with round headed bolts and nuts or by screws all complete

as per the structural designs and directions of Engineer in

charge 100.17 Kg.

b 500.00 Providing & Fixing Structural steel work ( Confirming to IS

4923-1997) riveted, bolted or welded in builtup for all type

sections, in framed work, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel primer

all complete as per the structural designs and directions of

Engineer in charge 126.68 Kg.

c 200.00 Applying priming coat over new steel and other metel surface

after and including preparing the surface by throughly

cleaning, oil, grease, dirt and other foreign matter and

scoured with brushes fine steel wood, scrapers and sand

paper with ready mixed priming paint brushing red lead.

d 200.00 Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to

give an even shade including cleaning the surface an even

shade including cleaning the surface of all dirt, dust and other

foreign matter. 86.94 Sqmt

e 20.00 Providing & Fixing 1 mm Thick S.S.-304 Grade 90 mm High

S.S. Railing having Hand Rail Member of 50 mm Dia., 3 No.

of Horizontal Pipe of 16 mm Dia. & Baluster Suppprt of

mm Dia. At Every Third Step as per Detail Given. Rate

Includes All Work Complete as per Description & as per

Direction of Engg. in Charge. 2270.21 R.Mtr.

47a 12.0 Providing and fixing in position collapsible steel shutters with

vertical channels 20x10x2 mm braced with flat iron diagonals

20x5 mm size with top & bottom rails of T-iron 40x40x6 mm

with 38 mm dia. Steel pulleys complete with bolts , nuts

locking arrangement , stoppers , handles including applying a

priming coat of red lead paint.

b 3.00 Providing corrugated 0.80 mm (22 gauge) thick G.I. sheets

roofing fixed with galvanized iron ‘J’ or ‘L’ hook bolts, and

nuts 8 mm. dia with bitumen and G.I. limpet washers filled

with white lead complete excluding the cost of purlines,

rafters and trusses. 719.93 Sq.M.

c 3.00 Providing valleys 900 mm. overall in plain 1.6 mm. thick G.I.

sheet Class – 3 fixed with ‘J’ or ‘L’ hook bolts and nuts

galvanized from ‘J’ or ‘L’ hook bolts and bitumen washers

complete. 1042.78 Sq.mt.

48a 9.0 Providing and fixing rolling shutters of approved make made

of 80 mm wide M.S. laths inter-locked together through their

entire length and jointed together at the ends by end locks

mounted on specially designed pipe shaft with bracket plates,

guide channels and arragements for inside and outside

locking with push-pull operation including the cost of hood

cover and spring etc. complete.(A) Shutters having width

below 3.5 M. 3468.72 Sq.M.

49a 30.00 Providing and fixing 27mm domal Series - 1.2 mm Th.

Alluminium Section Three track Sliding window With Metalic

Powder Coating and 4 MM Clear Glaas(Non Tuffen) Include

All Accessaries and Fixture etc. complete as per the direction

of Engineer-in-charge. 6373.85 Sq. M.

b 6.00 Providing and fixing 27mm domal Series - 1.2 mm Th.

Alluminium Section Two track Sliding window With Metalic

Powder Coating and 4 MM Clear Glaas(Non Tuffen) Include

All Accessaries and Fixture etc. complete as per the direction

of Engineer-in-charge. 4999.10 Sq. M.

c 6.00 ALUMINIUM DOOR WORK

Providing and fixing Aluminium Door work (Single Shutter OR

Double Shutter with fix glass) made from Jindal or equivalent

make Powder Coated (50 micron pure polyester coating )

,aluminium section frame built up standard tubular and other

section of approved make confirming to IS 733 and IS 1285

member size with shutters of horizontal member , vertical

member Confirming to IS733 and IS 1285 fixed with rawl plug

abd screws or fixing clips or with expansion hold fasteners

including necessary filling up of gaps at junctions at top

bottom and sides with required PVC/ Neoprene felt, 8/12 mm

toughened glass of approved make etc. Aluminum sections

shall be smooth, rust free, straight.mitred and jointed

mechanically wherever required including Door Hardware

such as cleat angles aluminum snap beading for glazing

/paneling, CP Brass/ Stainless steel screws, Stoppers, heavy

duty floor hing, S.S. Hinges, aldrop , Locking system, heavy

duty Floor Springs, Pivot and fixtures and transparent silicon

sealant glass fixing to frame as per details all complete as

per architectural drawings and the direction of Engineer in

Charge. rate incl. all type of alumnium sections for doors as

per the detail Architectural dwg.

50 a 7.00 Providing and fixing standared extruded of alluminium

section of size 63 mm x 38.10 mm x 1.2mm (Section:2434,

@ Wt.0.643Kg/mt ) with colour anodized alluminium frame

for ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation 1163.92 Sq. M.

50 b 10.00 Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm ( Section no:

@Wt 1.094 Kg / Rmt with colour anodized alluminium frame

with 5 mm thick transparent bronze colour tinted float glass

as details etc complete for Fix window.

50c 12.00 Providing Fixing 1.2 mm thick Alluminium Section Partition -

Fully Glazed / Partly Panelled Partly Glazed / Fully Panelled

Having Size of Section of 2.1/2 x 1.1/2 with 4 mm Compact

Sheet / 5 mm thick Glass Fixing with 4 mm thick EPDM

Rubber etc. Complete as per Direction of Consultant /

Engg.incharge. 3124.44 Sq.mtr.

50d 4.00 Providing Fixing 1.2 mm thick Alluminium Section Partition

Door -Fully Glazed / Partly Panelled Partly Glazed / Fully

Panelled , frame Having Size of Section of 2 .1/2 x 1 .1/2

and Door Section Having Size of Tips Vertical 1 .3/4 x

.3/4, Top Rail 4 x 1 .3/4, Middle Rail 1 .3/4 x 1 .3/4, Bottom

rail 4 x 1 .3/4 with 4 mm Compact Sheet / 5 mm thick Glass

Fixing with 4 mm thick EPDM Rubber Including Lock,

Handle, Door Closer, Door Stoper, Stopper etc Complete as

per Direction of Consultant / Engg.incharge.

4061.77 Sq.mtr.

51a 10.00 Providing and fixing Structural Glazing with using the

Micron anodised of approved colour alluminium section as

transium, mullium of size 63mm x 38mm x 2 mm with using

mm thick reflective structural glass of approved make, colour

/ Tinted, toughned and shade and fixed with silicone sealant

and spacer tap and at corner sealed neoprene foam dust and

Air sealed gasket mirred including scaffolding, cleaning of

glass etc.complete at all heights anf lifts with all necessary

fitting and fixtures, anchore fasteners, necessary M.S. or

Aluminium brackets, suitable design for openable or sliding

window as per Architectural drawing and as directed by

Engineer-in-charge. Grooves between the glasses to be filled

with sealant of Dow corning - structural sealant 995, weather

sealant 789. The entire facade should be water proof. The

mullions are to be connected to bracket by SS-304 nut bolts.

Measurement shall be given as per actual execution of the

work. (Rate are included providing & fixing of MS structure

steel work wherever Required)

51b 4.00 Providing and fixing 12 mm thick Toughened Glass Door with

/ Without Fix Portion Including Floor Spring , Lock, 300 mm

Long Door Handle, Nut Bolt, Clamp, Connector and All

accessaries as approved by Engg. Incharge 6449.86 Sq.mt.

Providing and fixing ISI marked 35 mm thick flush door

shutters conforming to IS : 2202 (Part I) decorative type, core

of block board construction with frame of 1st class hard wood

and well matched teak 3 ply veneering with vertical grains or

cross bands and face veneers on both faces of shutters with

1.00 mm thick Decorative Laminated Sheet on both faces of

shutters including ISI marked Stainless Steel butt hinges,

bright /matt finished 125 mm Stainless Steel handles of

approved quality & make, ISI marked oxidised M.S. door

latches / Aldrop Conforming to IS:5930 with necessary

screws etc. complete as per direction of Engg. incharge.

Providing wood work in frames of Doors, windows cleare

story windows and othersimilar works wrought, framede and

fixed in position. (A) Indian Teak Wood

53 Providing and fixing 35 mm th. Shutters for doors windows

& clearstory windows incl. wood frames as specified 12 cm.

x 7cm. size incl. anodised alluminium fixtures and fastenings

including primer coat of approved quality and two coats of oil

paint etc. complete.

a 3.00 Fully glazed 4788.50 Sq. M.

b 3.00 Fully panelled 5478.89 Sq. M.

c 3.00 Partly panelled and partly glazed 5133.69 Sq. M.

54 9.00 Providing and fixing FRP frame size 100x50 mm and 28mm

thick FRP depress panel shutter having extra reinforcement

on sides & edges in Gel coat finish. The core of the shutter &

frame is to be filed up with injected fire retardant grade

polyurethene foam done in situ alongwith embedded wooden

pieces for stiffening & also taking hinges & fintures. The

whole FRP frame & shutter is to be water proof weather

proof, termite proof & resistance to mild acid/alkali. Rates are

to be inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve.

55 Making connection to the ex.M.H.in running sewer incl.

Dewatering and other required machinery etc. of following dia

pipes at any convenient time. All damaged work shall be well

repaired as per instructions. etc..complete.

a 1.00 For Pipe 150 mm to 300 mm diameter 1339.29 No.

b 1.00 For Pipe 400 mm to 600 mm diameter 2232.14 No.

56 1.00 Making connection of galvanised Mild steel distribution

branch with galvanised mild steel main 50mm to 80mm

nominal bore by providing and fixing tee including cutting and

threading the pipes complete 600.08 No.

57a 140.00 Providing throating or plaster drip, grooves and moulding to

Wall , R.C.C. chajja and slab.

57b 40.00 Providing & Laying cement vatta 10 cm x 10 cm in size

quarter round in c.m. 1:1 ( 1 cement, 1 coarse sand) laid in

one layers finishing with a floating of neat cement watering

etc complete as dire. 23.45 Rmt

58 270.00 Carring out plinth treat ment to post construction/ existing

structure by spraying chemical solution for termite control

treatment including labour and material consist ment withI.S.I

specification. Using Chlordene and Chiorpur files 20EC. As

Per 6131_ paret- II Consentration Weight one percent is

recommended i.e one litre 20EC chemical emulsion with19

liter give1% concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical/ Sqm of

surface is recommended as per I.S

59 10.00 Carring out timber treatment to all wood work including

drilling holes and spraying oil based chemical solution on

surface of timber work for termite control including labour and

material etc. complete. Using Chlordene 20EC. As Per

6113_part III Consentration Weight 1.00 percent is

recommended one litre chemical emulsion dillute with 9 liter

of kerosene precent concentration. Total dillute

concrentration will be10litre inclusive of the litre chemical

emulsion application 0.75/Litre chemical per one Sqmt

printed two coat wood surface. 54.98 Smt

60 100.00 Paver Block Providing and laying shot blasted Non -

interlocking, Paver blocks of specified thickness, size, grade

of concrete and colour machine made and blasting by

automatic shot blasting machine and high density of as per

approved sample of approved make for footpath, parking

areas, service lanes,cross over and other areas as

mentioned in the drawing. Including providing and laying

mm thick averave bedding layer of coarse sand below paver

block as per required grading and specification. Laid paver

block shall be mechanically compacted. The work of the

paving blocks shall be executed in line and level by skilled

mason of flooring work only. Small size of paver block with

same specification shall be used at residue or at end. It

should be laid in such a way that the no cutting of the paver

block to be necessary. If cutting of paver block shall be

required , than cut by machine only and laying to be done by

skilled flooring mason. The finished surface of the paver

block shall have coarse sand Texture Finish. Pave blocks

shall be compacted and shall be re-laid if necessary. Actual

laid area shall be measured and paid without any wastage.

(A) 80 mm thick M-35 grade Grey Paver block of size 200mm

x 200mm. As per approved rate

61 100.00 Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height and

15cm thick of M250 grade concret as per approved design

and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

complete. 358.06 R.mt.

62a 2.00 Providing and fixing double action hydraulic floor spring of

approved brand and manufacture conforming to IS :

having brand logo embossed on the body / plate with double

spring mechanism and door weight upto 125 kg, for doors,

including cost of cutting floors, embedding in floors as

required and making good the same matching to the existing

floor finishing and cover plates with brass pivot and single

piece M.S. sheet outer box with slide plate etc. complete as

per the direction of Engineer-in-charge. With stainless steel

cover plate minimum 1.25 mm thickness 4558.89 No.

b 5.00 Providing and fixing aluminium extruded section body tubular

type universal hydraulic door closer (having brand logo with

ISi, IS : 3564, embossed on the body, door weight upto 36 kg

to 80 kg and door width from 701 mm to 1200 mm), with

double speed adjustment with necessary accessories and

screws etc. complete. 1626.10 No.

63 10.00 Designing, fabricating, testing, installing and fixing in position

Curtain Wall with Aluminium Composite Panel Cladding, with

open grooves for linear as well as curvilinear portions of the

building , for all heights and all levels etc. including:

(a) Structural analysis & design and preparation of shop

drawings for pressure equalisation or rain screen principle as

required, proper drainage of water to make it watertight

including checking of all the structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of

aluminium composite panel cladding in pan shape in metalic

colour of approved shades made out of 4mm thick aluminium

composite panel material consisting of 3mm thick FR grade

mineral core sandwiched between two Aluminium sheets

(each 0.5mm thick). The aluminium composite panel

cladding sheet shall be coil coated, with Kynar 500 based

PVDF / Lumiflon based fluoropolymer resin coating of

approved colour andshade on face # 1 and polymer (Service)

coating on face # 2 as specified using stainless steel screws,

nuts, bolts, washers, cleats, weather silicone sealant, backer

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS

with Hot Dip Galvanised with serrations and serrated

washers to arrest the wind load movement, fasteners, SS

316 Pins and anchor bolts of approved make in SS

Nylon separators to prevent bi-metallic contacts all complete

required to perform as per specification and drawing The

item includes cost of all material & labour component, the

cost of all mock ups at site, cost of all samples of the

individual components for testing in an approved laboratory,

field tests on the assembled working curtain wall with

aluminium composite panel cladding, cleaning and protection

of the curtain wall with aluminium composite panel cladding

till the handing over of the building for occupation. Base

frame work cost for ACP cladding is included in this item

rate. The Contractor shall provide curtain wall with aluminium

composite panel cladding, having all the performance

characteristics all complete , as per the Architectural

drawings, as per item description, as specified, as per the

approved shop drawings and as directed by the Engineer-in-

Charge. However, for the purpose of payment, only the

actual area on the external face of the curtain wall with

Aluminum Composite Panel Cladding (including width of

groove) shall be measured in sqm. up to two decimal places.

64 Providing and Fixing Box type metal letters forming

composite box made from 1mm thick stainless steel plate of

grade 304 having brush finish of following font size to be

fixed at Main Gate in english and or Gujrati and including

fixing charges. etc. complete as per direction of Engg.

incharge. for Payment Purpose Height of Letter will be

a 960.00 Upto 300 mm Height

65a 12.00 Providing and Fixing MURAL made out of 2mm thick s.s.

plate grade 304, including making necessary design as per

Architect dwg. Through laser cutting including connection to

the R.C.C./Masonary with necessary frame,anchor

fastnuts,M.S.Plate etc. complete as per direction of Engg.

incharge. 6804.07 Sq.mt.

65b 1700.00 Providing and Fixing Sinage - internal and external signage

boards with Vinyle Text on ACP sheet / 2 mm th. S.S. Plate

etc. complete as per direction of Engg. incharge.

65c 3.00 Providing and fixing retro Reflective Hi Intensity Micro

Prismatic Grade Board using 2mm Aluminum / 4mm ACP,

angle iron 75 x 75 x 6mm. Descaling and degreasing the

board as per requirement using epoxy reflactive process by

screen painting as directed etc. complete including

transporting and fixing in C.C. 1:2:4 with necessary

excavation curing etc. complete as per I.R.C. 67-2012

design. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for

the product offered shall be submitted by contractor. (B)Class

B Type-4(MDR/ODR) retro reflective sheeting

7535.31 Sq.mtr.

65d 60.00 Road marking with hot applied thermoplastic paints with

reflectorising glass beads on bitumin surface providing and

laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area,

thickness of 2.5mm is excluding of surface applied glass

beds as per IRC:35-2015. The finished surface to be level,

uniform and free from streaks and holes. zebra patta /bump

patta lane/center line/ edge line/cut patta. The white color

marking should provide liminance coefficinet on cemend road

shalll be min 130 mcd/m2/lux and Asphalt road shall be min

100 mcd/m2/lux during the service life during the day time.

The marking should meet the performance criteria for night

time reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 352015. Warranty for the

Retro reflectivity should be two years.

65e 10.00 CAT EYE/Pavement Marker(MNC two nail) made out of

acrylic StreneAcrylonitrile or hi-impact poly Steren fitted with

moulded of metheacrylate(MNC)reflector cube corner

reflector design,filled with tightly adhering pooting compound

as per ASTMD-788 size 11.5x7x1.60 cms or 10x10x1.75

cms provided with bituminous adhesive in sufficient quantity

with each unit fixing with two shrank .Reflector on both

side.Co efficient of lumination as per specification and

compressive strenth 13 tones at 23 degree centigrade etc.B)

Double side lenses. 160.71 Nos.

66a 135.00 Providing and fixing eco-friendly light weight calcium silicate

false ceiling tiles having T egular edge & 15mm Thick

Densified edges on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles shall have, light

reflection 85% non-combustible as per B.S.476 part IV, 100%

humidity resistance and also having thermal conductivity

0.043° w/m KC. for the best thermal Insulation.

The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/ Cosmos having NRC value

of 0.5 & Globe having NRC value of 0.75 NRC or equivalent

of size 595X595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized

steel sections (galvanizing @ 120 grams per sqm including

bothside) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24X38 mm made

from 0.30 mm thick (minimum) sheet, 1200 mm centre to

centre, and cross ‘T’ of size 24X28 mm made out of 0.33 mm

(Minimum) sheet spaced 1200 mm along spaced between

main ‘T’ at 600 mm centre to centre to form a grid of

1200X600mm and secondary cross ’T’ of length 600mm and

size 24x28mm made of 0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 1200X600mm panel to form grid

of size 600X600mm resting on periphery walls / partitions on

a perimeter wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to centre

with 25mm long dry wall screws @ 230mm interval and

laying 15mm thick Densified edges light weight calcium

silicate ceiling tiles of approved texture (Fine Fissured/

Cosmos/Spintone) in the grid including, cutting /making

opening for services like diffusers, grills, light fittings, fixtures,

smoke detectors etc., wherever required, Main ‘T’ runners to

be suspended from ceiling using G.I. slotted cleats of size

25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm

long dash fasteners, 4mm G.I. adjustable rods with

galvanized steel level clips of size 85X30X0.8mm, spaced at

1200mm centre to centre long main ‘T’ bottom exposed with

24mm of all T-sections shall be pre-painted with polyester

baked paint, for all heights,

, as per specifications, drawings and as directed by engineer-

incharge.Note:- Only calcium silicate false ceiling area will be

measured from wall to wall. No deduction shall be made for

exposed frames/ opening (cut outs) having area less than

0.30 sqm. The calcium silicate ceiling tiles shall have NRC.

Value of 0.50 (Minimum) for Fine fissured/ Spintone/ Cosmos

and 0.75 NRC for Globe, light reflection 85% noncombustible

as per B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity. 0.043° w/m KC.for the best

thermal Insulation

66b 65.00 Providing and fixing single layer water proof gypusm board

12.5 mm thick of the make New good Group Co.Ltd. or

equivalent & New good Group Co.Ltd. company sections

using water proof board of size 1220 mm x 1830 mm x

mm suspended by G.I suspender of size 25 mm x 3 mm with

intermediate channel of size 18mm x40mm x0.80mm at

mm center to center ceiling section of size 40mmx 35mmx

0.55mm at 457 mm center to center and perimetre chanel A

of size 20mm x 27mm x 30mm x 0.50mm at edges & drops

including paper taps and sofit cleat, anchor fastener, scoch

bolt connecting cleat joining compound top coat on ceiling

including making necessary opening for light fitting, diffuser

etc. complete as per detail drawing as directed.

67 Providing and Fixing 6 mm thick Lexan Polycarbonate multi

wall roofing sheet fixed with hilti screw and rubber silicon

sealer and alluminium strip of size 50 x 3 mm etc complete

5.00 as directed by Engineer in charge 1427.62 sq.mt.

68 Manufacturing,testing ,supplying loading,,transporting to work

site,loading unloading lowering in trenches,laying and jointing

RCC NP3 class pipes in C:M 1:1 including all jointing

materials such as cement,sand,hemp bitumen as directed

testing the pipe line to a head of 1.5 mt and hydraulic test as

directed etc comp.

a 50.00 300 mm Diameter 616.07 Rmt

b 10.00 450 mm Diameter 806.25 Rmt

69 5.00 Constructing Bombay Pattern Type Catch Pit of size

x 0.60 depth up to 1 mt including excavation, B.B.C.C.

(1:5:10), 23 cms thick brick maso. wall in the prop. of CM

(1:6) with 40 mm thick IPS flooring in the prop M15 at

bottom and 15 mm thick cement plaster inside the catch pit in

the proportion of CM (1:3) with out jali etc. comp. as

directed. 3125 No

CatchPit Jali Fixing P/F FRC catch pit jali with frame 600mm

x 600mm clear opening etc. comp.. As directed by engineer

Estimate For Civil Work Rs.

Unit Rate Amount

I. No. Qty Items Per

Electrical Work Estimate

1.0 INTERNAL WIRING

1.1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade ZHFR/HRFR

PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell push

& accessories and earth continuity of following type, erected on

PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in wall

/ ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

50 (f) with medium class Rigid PVC pipe and accessories erected 505.05 Pt

concealed in wall/ceiling complete

1.2 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade ZHFR/HRFR PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free

EME four or more step type electronic fan regulator with separately

mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.

20 (f) with medium class Rigid PVC pipe and accessories erected 701.40 Pt

concealed in wall/ceiling complete

1.3 Point wiring for secondary light point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand copper wires, in below

type of pipe to be erected complete with earth continuity and

necessary connection with primary light with accessories erected

on Metal / PVC / wooden box covered covered with appropriate

front plate modules erected on / in wall / ceiling for open /

concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.as per pipe erected with following type

of accessories.

Note:- Maximum up to 6 mtrs length, excess will be considered

as Mains for Secondary Point.

30 (f) with medium class Rigid PVC pipe and accessories erected 174.30 Pt

concealed in wall/ceiling complete

1.4 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

1.4.1 8 [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from 530.25 Pt

nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

1.4.2 4 [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire 774.90 Pt

from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

1.4.3 12 [III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire 906.15 Pt

with 2.5 sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

1.5 15 Point wiring for on board Looped Plug with 6A Modular type 255 Pt

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured / metallic/white

front plate modules erected on / in wall / ceiling with following type

1.6 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade ZHFR/HRFR PVC insulated multi strand copper wires

erected in below type of pipe with 6A Modular type switches and

following type of accessories erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary batten/angle holder or ceiling rose

or H.D.Connector as directed.

2 (f) with medium class Rigid PVC pipe and accessories erected 627.90 Pt

concealed in wall/ceiling complete

1.7 Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with

necessary connections as per site situation directed by Engineer In

1.7.1 2 (1)One No. SP 6 Amp. 150 E.a.

1.7.2 2 (2) One No 5 pin plug 150 E.a.

1.7.3 20 (7) Blank Plate Single 25 E.a.

1.7.4 1 (8) Computer RJ-45 socket 159 E.a.

1.7.5 10 (9) 16 Amp. SP one way switch 179 E.a.

1.7.6 10 (10) 6/16Amp. Universal socket 198 E.a.

1.7.7 2 (13) 6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch 307 E.a.

1.7.8 10 (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB 406 E.a.

1.8 Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved

manner as directed

1.9 Providing & erecting PVC Corrugated Flexible Conduit with

required nos. of coupling, PVC bushes, Check-nuts etc. complete

of following sizes.

1.10 providing and erecting Mains with ISI marked electrolyte stranded

copper conductor, Non PVC Zero Halogen free fire retardant

insulated copper conductor, insulated wire (HRFR) conforms to IS-

694, erected in existing pipe with 1.5sq. mm copper conductor of

same specifications for earth continuity of following size.

In Existing medium class Rigid PVC pipe and accessories

1.10.1 260 (a) 2 wire 1.5 sq. mm 51 Mtr

1.10.2 330 (b) 2 wire 2.5 sq. mm 71 Mtr

1.10.3 220 (a) 2 wire 4 sq. mm 101 Mtr

1.10.4 115 (b) 2 wire 6 sq. mm 139 Mtr

1.11 providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

1.11.1 80 (h) 4 wire 6 sq. mm 258 Mtr

1.11.2 15 (i) 4 wire 10 sq. mm 421 Mtr

(use earth wire of 4 sq.mm )

1.12 providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if required.

1.12.1 10 (e) One wire 6.00 sq. mm 56 Mtr

1.12.2 20 (f) One wire 10.00 sq. mm 91 Mtr

1.12.3 15 (g) One wire 16.00 sq. mm 141 Mtr

1.12.4 5 (h) One wire 25.00 sq. mm 234 Mtr

1.12.5 40 (i) One wire 35.00 sq. mm 298 Mtr

1.13 Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kv grade ISI marked copper wires of following size to be

erected as directed.

1.13.1 40 e) 1.50 Sq.mm 3 core round PVC sheathed 46 Mtr

1.13.2 10 h) 2.50 Sq.mm 3 core round PVC sheathed 77 Mtr

1.13.3 10 k) 4.00Sq.mm 4 core round PVC sheathed 175 Mtr

1.14 Supplying & erecting M.S. Box having 16 Gauge painted with red

oxide or Heavy duty PVC box erected flushed on wall or concealed

in wall with necessary plastering & finishing as directed of following

1.15 Supplying and laying UPVC cable trunking system comprising

unplasticised polyvinyl, chloride rigid material with ignition free and

flame proof confirming BS with necessary end caps Internal and

external bend, flat bends, coupler, tee etc..All necessary

accessories and measuring of following sizes

1.15.1 5 (2) 100 mm x 50 mm trunking 424 Mtr

1.15.2 5 (4)100 mm x 50 mm trunking with TWIN compartment With clip in 1309 Mtr

1.16 Supply & installation of surface mounted U PVC snap-on

adaptable trunking raceways, fabricated out of U-PVC to Off-White

or approved shade as per IS 733 of thickness 2.0mm for the base

and sides with all accessories like removable covers, joints ,height

spacer,angles complete with necessary bends, suitable sized

junction boxes and tees etc, Complete.

5 (a)Size: 50x80mm PVC Raceways for Power & Data with 2 1052 Mtr

compartments above specifications.

1.17 Supply & installation of modular type accessories for U PVC snap-

on adaptable trunking/Pop up Box with required items erected with

necessary connection. As desired by Engineer In charge

1.17.1 1 i) 6 A SP 1 Way Switch 204 No

1.17.2 1 ii) 16A SP 1 Way Switch 351 No

1.17.3 1 iv) 6A universal socket shuttered 347 No

1.17.4 1 iv) 6/16 A universal socket shuttered 458 No

SUB - TOTAL OF INTERNAL WIRING

2.0 Switchgears , Panels , MCBDBs & MCBs

2.1 Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with variable Thermal &

magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S.housing

1 ICS=100% of ICU only 16061 No

2.2 providing and erecting Approved make Earth fault Relay suitable

to mount with inter connection suitable to following size of moulded

case circuit breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal connections &

complete erected in existing M.S.housing..

2.3.1 1 Design, fabrication, assembling, supply, installation, testing and 126865 No

commissioning of cubicle type, wall / Floor mounted LT panel

suitable for 415 V 3 phase, 4 wire 50 Hz AC supply system

fabricated in compartmentised design from CRCA sheet steel of

mm thick for frame work ,Doors and partitions IP 42 and covers,3

mm thick for gland plates i/c cleaning and finishing complete 9 tank

process in house facility for powder coating in approved

shade, extendable type FP aluminium alloy busbars of high

condectivity, DMC/SMC busbar supports, entire panel shall have a

common copper earthbar of size 25mm X 5 mm at the rear with

Nos. earth studs, solid connection from main busbar to switchgears

with require size of aluminium busbar & control wiring with

sqmm FRLS insulated copper conductor cable, cable alleys, cable

gland plates i/c accessrories as per specification and providing

switchgears, metering instruments etc. for following

panel.G.A.Drawing to be approved by EIC or consultant. ( Outgoing

connectors must be nut-bolt type. Outgoing mains for 63Amp

MCBs must be of 4 x 16sqmm cu flexible wires).Incomers Mains for

MCBs shall be always from the busbars.

( a ) Providing cable clamps / supports within distribution boards

( b ) All hinged door shall be earthed through 2.5 sq mm tinned b

raided copper wire.

( c ) Pad locking of MCCB’s handles in “OFF” Position.

( d ) All the C.T.s should be auto short link type.

( e ) All the MCCB's should be with rotary handle.

( f ) All incoming and outgoing air circuit breakers shall be placed

on middle portion of the vertical in single tier formation.

( g ) Any descripancy found in SLD & Boq , it should be brought in

the notice of the client / consultant, and the decision will be taken

final by Client / consultant.

A. Incoming Feeder:-

(i) 1 Nos. of 160 Amps, 415V, 36kA, FP MCCB with Thermal

magnetic Based releases having O/C & S/C along with following

(ii)LED type Indicating Lamp with suitable rating 2A SP MCB:-

Sets (each set comprise of R,Y,B)

(iii) Digital type 3 phase Multi function Meter with suitable rating of

MCB & 3 Nos. of single core epoxy resin cast type CTs of 160 /5

Amps, 10 VA, CL 1.0 ratings, , C.T. Short Terminal with end plate

6nos, Neutral link 2 nos.

200 Amps, 415 V, FP Aluminium Busbars with Heat shrinkable

color code insulation sleeves.

(i) 1 Nos. of 125 Amps, 415V, 25kA, FP MCCB with Thermal

magnetic Based releases having O/C & S/C protection.

( b ) 4 nos. of 63Amps ,10kA, FPMCB " C " curve

( c ) 4 nos. of 40Amp ,10kA DPMCB " C " curve

( e ) 2 nos. 25A, 10KA DPMCB " C " curve

( d ) 1 no. 63A, 10KA TP MCB " C " curve

2.3.2 1 15KVAR APFC PANEL 69510 No

Design, fabrication, assembling, supply, installation, testing and

commissioning of cubicle type,15KVAR, Voltage Rating 415V

A.C.,3-Phase , APFC Panel having 5-steps ( 2-3-5-5 kvar heavy

duty can type capacitors ) with suitable rating of Incomer MCB, CT.

as per approved by engineer incharge.

MCBDBs and MCBs

2.4 85 providing and erecting Miniature circuit breaker single pole 6A 111 E.a.

to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box. confirming

to IS 8828/1996 with ISI Mark

2.5 Providing & erecting 240 V MCB double pole switch for motor

& inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

2.6 Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

2.7 2 Sheets steel powder coated enclosure suitable for incorporating 175 E.a.

One/Two nos. MCB.

2.8 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable

(A) single phase incoming and horizontal single phase

(b) sheet steel double door (IP-43)

2.8.1 2 (i)4 way ( concealed manner ) 747.60 E.a.

2.8.3 1 (iii)8 way ( concealed manner ) 1369.20 E.a.

2.8.5 4 (iv)12 way ( concealed manner ) 1773.60 E.a.

2.8.7 (B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(b) sheet steel double door

2.8.7 a 1 (i)4 way ( concealed manner ) 2779.20 E.a.

2.8.7 c 2 (ii)6 way ( concealed manner ) 3462 E.a.

2.8.7 e 1 (iii)8 way ( concealed manner ) 4054.80 E.a.

2.8.7 f 1 (iii)8 way 3379 E.a.

2.9 Supplying & erecting Sheet Steel powder coated Cable end

termination Box to be mounted on Top or Bottom of the MCB

Distribution Box for housing/covering Extra wires & Cables, suitable

for following size of MCB DB Box.

2.9.1 4 (F) Three Phase 6 Way 692.4 E.a.

2.9.2 2 (F) Three Phase 6 Way 577 E.a.

2.9.3 2 (G) Three Phase 8 Way ( concealed manner ) 819.60 E.a.

2.9.4 2 (G) Three Phase 8 Way 683 E.a.

2.10 providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed

2.11 8 Providing and erecting metallic vitrified danger notice board as 69 E.a.

per language suggested by engineer incharge for MEDIUM

VOLTAGE installation to be erected as per IS-2551.

2.12 8 Providing & erecting Medium Voltage Danger Notice Board 26 E.a.

sticker as per language suggested by engineer incharge of

standard size as per IS-2551

2.13 15 Fabricating the box type items made from M.S. Sheet with A.I. 179 Kg

supports, wings, doors, handles other hardware materials as per

requirement design with finishing by three tank powder coating

processed inside and outside painted, erected as directed

including minor civil work. to install above MCCB.

SUB - TOTAL OF Switchgears , Panel and MCBDBs.

Follow IS code :3043 is the guideline for the earthing

3.1 90 Providing and erecting required size HOT deep Galvanised iron 77 KG

strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board,

Motors etc. using proper clamp.

3.2 20 Providing and erecting required size Copper strip for earthing of 787 KG

H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using

3.3 10 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 787 KG

3.4 60 Providing and erecting HOT deep Galvanised iron strip wire 8 to 77 KG

3.5 Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should

be capable to retain moisture for long time Necessary test report

must be submitted.

3.5.1 1 (a) For Electrical Installation up to 440V in normal soil 4546 E.a.

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

3.5.2 1 (c) For Electrical Installation covering Transformer Neutrals, 8551 E.a.

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent Earthing in

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

3.6 2 Supply, installation,testing and commissioning of Chemical 12230 No

Earthing with UL Certified 17.2mm Dia. X 3000mm Long

Micron-Copper bonded M.S. Rod manufactured as per IEC 62561-

2 with 25Kg Bentonite powder plus " U " bolt rod clamp complete

with Lockable high performence chamber suitable & tested for

5000T capacity with SS Hardware.or equivalent

SUB - TOTAL OF Earthing

4.0 CABLES, Cable Termination and cable Trenches

4.1 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size

4.1.1 20 (A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 218 Mtr

4.1.2 50 (B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 282 Mtr

4.1.3 40 (D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 375 Mtr

4.1.4 15 (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) 486 Mtr

4.2 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables

4.2.1 30 (a) 4 core 4 Sq. mm 116 Mtr

4.2.2 30 (b) 4 core 6 Sq. mm 125 Mtr

4.2.3 10 (c) 4 core 10 Sq. mm 139 Mtr

4.3 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size

4.3.1 20 (d) 4 core 16 Sq. mm 152 Mtr

4.3.2 20 (e) 4 core 25 Sq. mm 189 Mtr

4.4 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cable.

4.4.1 115 (C) 3 core 6 Sq. mm 392 Mtr

4.4.2 10 (D) 3 core 10 Sq. mm 495 Mtr

4.5 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

4.5.1 20 (A) 4 core 2.5 Sq. mm 269 Mtr

4.5.2 20 (B) 4 core 4 Sq. mm 361 Mtr

4.5.3 40 (C) 4 core 6 Sq. mm 505 Mtr

4.6 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road crossing

or floor of following size of cables.

80 (C) 4 core 10 Sq. mm 670 Mtr

4.7 40 Making trench in soft soil of suitable width of 90 cm deep for laying 55 Mtr

cable or locating the fault all over the run and back filling the same

and making the surface as normal ground.

4.8 40 Covering of cable with second class bricks or cement tiles laid 139 Mtr

cover the cable crosswise & also on both sides with covering of 7.

Cm. layer of sand above & below cable (16 bricks per meter)

4.9 10 ( A )Making trench in Hard Murrum / Tar Road of suitable width of 74 Mtr

90 cm or required depth for laying any size of cable or locating the

fault all over the run and back filling the same and making the

surface as normal ground.

4.10 5 (B) If additional machinery like hammer driller or JCB use [Add] 354 Mtr

4.11 Drilling the road without breaking the road surface (Asphalt)

for laying of cable for feeding power supply by making up to

following size of holes at both ends complete.

4.11.1 5 (A) Up to 100 mm bore dia 488 Mtr

4.11.2 5 (B) Up to 150 mm bore dia 610 Mtr

4.12 Supplying following size of Light duty “A” Class G.I . Pipe &

erecting as directed by Engineer-in-charge.

20 (A) 25 mm dia 171 Mtr

4.13 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm.

below ground across the road crossing or on floor with necessary

material in an approved manner and making the ground as per

4.14 Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground / road

surface for enclosing cable

4.14.1 50 (A)50 mm outer dia 62 Mtr

4.14.2 25 (B)63mm outer dia 73 Mtr

4.15 Providing & laying approved make ISI marked Rigid PVC pipe

having 6Kg / cm2 (Class-3) to be erected at road crossing on or

floor as directed for laying of cable. The pipes as following size of

dia & weight per 6 mtr.

4.15.1 5 (D) 75 mm inner Dia. (5.5 Kg/6RMT) 124 Mtr

4.15.2 5 (F) 110 mm inner Dia. (11.63 Kg/6 RMT) 234 Mtr

4.16 Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

4.16.2 18 (b) 2 to 4 core 6 Sq. mm 38 E.a.

4.16.3 5 (c) 2 to 4 core 10 Sq. mm 38 E.a.

4.16.4 2 (d) 2 to 4 core 16 Sq. mm 47 E.a.

4.16.5 2 (e) 2 to 4 core 25 Sq. mm 51 E.a.

4.17 Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating

tape etc for following size of cables.

4.18 Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

4.19 Solder less crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

4.20 Providing and fixing approved make Perforated C type cable tray.

Made from sheet steel. The cable tray should be single or double

bended as per required and as per IS 2062/1079 and shall be

coated with hot dip galvanizing as per IS 2629/4759. with max

17.5% perforation with coupler plate / Fish plate and GI hardware

like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer in

SUB - TOTAL OF Cables,Cable Terminations & Cable

5.0 Light Fixtures & Fans

Supply , Installation, testing and commissioning of pre-wired, LED

fitting/post top luminaries etc of all types, complete with all

accessories and tube etc. directly on ceiling/ wall, including

connection with 1.5 sq. mm FRLS PVC insulated, flexible, copper

conductor, single core cable with flexible conduits and coupler and

earthing etc. as required. Note:- The LED Light fixtures should

comply all international standards third party ( LM 79 for

complete fixture, LM 80 for individual LED ). The

Manufacturer / Channel Partner of the Manufacturer has to

submit 4- Years unconditional free Replacement Guarantee

for complete fixture.

5.1 Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency

> 85 %( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

5.1.1 ( A ) Tube Light with integral / non integral driver

5.1.1a 2 (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet 293 No

5.1.1b 10 (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet 530 No

5.1.2 (B) LED Panel Light with provision for Plane front frame with

translucent cover fixed to housing complete.IP20

5.1.2a 4 (i)up to 8 Watts,4" x 4", Surge-2 KV 271 No

5.1.2b 20 (iii) 12-15 watts, 6" x 6", Surge-2 KV 462 No

5.1.2c 10 (iv) 18 to 20 watts, 8" x 8", Surge- 2 KV 607 No

5.1.2d 22 (vi) 36 watts, 24" x 24", Surge- 2KV 1777 No

5.1.3 (G) Spot Light 425 Lumens, Surge-2KV

5.1.3a 5 (a) 3 to 7 Watts 805 No

5.1.3b 2 (b) 8 to 11 Watts 1354 No

5.1.4 2 (H) Mirror Light 9 Watts, wall mounted minimum 1 feet long 309 No

5.2 20 Providing & erecting Approved make Power Saving 50 Watt 1929 No

Ceiling Fan with double ball bearing ISI mark with Condenser

230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades

with aluminium blades with , canopy & 30 cm. down rod erected

with earthing.(Make shall be approved by Engineer in charge))

5.3 1 Supplying and erecting approved make oscillating type medium 2329 No

duty bracket fan with Aluminium Blades A.C. 23OV. 50cy/s wall

mounted with height adjustment and rotary tilting device complete

with guard, mounting accessories kit, pull cord for speed and

oscillation flexible Core plug top complete erected with lead wires

as directed. 400MM.

5.4 6 Supplying & erecting approved make low noise decorative exhaust 1687 No

fan having size 200mm with 1350 RPM with square frame ABS

body with inbuilt lowers & square frame.

5.5 20 Supplying & erecting fan hook box of 10 mm M.S. round bar 107 No

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

5.6 20 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook 18 No

5.7 20 Supplying and erecting 19 / 20 mm. nominal bore Medium Class 107 Mtr

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing.

5.8 Supplying & erecting single phase approved make industrial

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size and

maximum speed in RPM

1 [D] 450 mm dia 900 RPM 3306 No

5.9 1 Providing suitable M.S. louver shutter of the Exhaust fan. 365 No

5.10 1 Supplying & erecting electro galvanised G.I. wire micro mesh jali 628 Sqmtr

cover of grade 304 required size with suitable wooden frame duly

fitted in wall outside of exhaust fan for insect protection.

5.11 4 Providing and erecting PVC body surface or pendent mounting 780 No

LED Bulk type 9 watt Lighting Fitting with electronic driver. And

lumen output from luminaire 720lm , input voltage range 90-

300VAC , 50Hz cool white(3000 to 6500k), inbuilt driver, -20degC

to +60degC working temperature, AL frame with Beam Angle

SUB - TOTAL OF Light Fixtures & Fans

6.0 External lighting

Supply , Installation, testing and commissioning of pre-wired, LED

fitting /post top luminaries etc of all typesof external lights,

complete with all accessories and tube etc. directly on pole / pole

bracket , including connection with 1.5 / 2.5 sq. mm FRLS PVC

insulated,3 core flexible, copper conductor, with flexible conduits

and coupler and earthing etc. as required.

6.1 Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)

6.1.1 (A) Street Light (IP-65), Surge protection -4KV /5000K integral and

10 kv non integral ,Light must have 440VAC line supply protection.

It should withstand 48 hours for 440VAC line supply.

3 (f) Above 60 watts to 90 watts 5917 No

6.1.2 (B) Flood Light (IP-65), Surge -4KV/5000K ,Light must have

440VAC line supply protection. It should withstand 48 hours for

440VAC line supply

6.1.2a 2 (c) Above 60 watts to 90 watts 6028 No

6.1.2b 1 (v) above 120 to 160 watts 8370 No

6.2 Supply of approved make frp/grp pole having followiing

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having minimum

glass content 45.0%.The pole should be in one pieceand tapered

round in shape,having smooth outside surface finish and should be

totally fre from corrosion as well as non conductive and shock

proof. Pole should be provided with FRP/GRP base bracket dully

fabricated from metal(M.S) and dully claded with FRP/GRP material

to avoid any metal exposer and painted with PU paint.Pole should

mechanical properties i.e 1. Specfic gravity (ASTM D 792) 1.3‐1.8

Kg/m3, 2. Glass Content % by weight (ASTM D 2584) 45.0 ‐55.0%,

3. Water absorption (ASTM D 570) <0.5%, 4. Tensile

Strength(ASTM D 638) 200+/‐50Mpa, 5. Flexural strength (ASTM D

790) 250+/‐50Mpa, 6. Compressive Strength (ASTM D 695)

200+/‐50MPa, 7. Yeild Strength(ASTM D638) 250 +/‐50MPa.

Pole should be flame retardant as per IS 6746.Resin used shall be

UV resistance and pigmented. Pole should be painted with first

coat of epoxy primer and then two coat of highly weather resistance

polyurethen paint to ensure proper addhesion of the paint.Minimum

thickness shall be 80 to 100 micron.Defelection of the pole shall not

exceed more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility features of

poles as per the standard ANSI C123.20 latest version of ASTM D

923/01 including cable termination box with necessory

accessories.The size of pole and type of installation with

foundation , Anchor Base & Internal junction box as per the

manufacturer details and site requirement .

(3) 'B' class (Heavy Duty) frp/grp pole suitable for base plate

3 [D] Overall Length of 6.0 meter, Average thickness : 7mm, 16815 E.a.

Top/Bottom Outside Dia. 76/176mm +/‐2.Weight of Pole 25.0 Kg

approx. (Without base) Metal Anchor Base dully frp claded (Size :

340 Ø * 12mmthk , Mounting hole PCD 285mm * 6 nos. of 20 Ø

6.3 Providing FRP/GRP arm bracket of having 15˚ arm with 50 mm OD

pipe *5 mm thk,1000mm long from pole centre

6.3.1 3 (a) Single arm bracket 1882 No

6.4 2 Supplying & erecting sintex make SMC press moulded composite 472.00 No

FRP. loop-in, loop-out approx. 2mm thick box complete with

bakelite connector strip 4way & hinged doors having locking

arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on wall ( c)150mm x 125mm x 100mm [deep].

6.5 3 Providing cement concrete.for foundation or for concrete filling 5077.00 CU Mtr

in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered with

necessary curing for pole muffing or any other purpose.

6.6 2 B' class galvanised iron pipe 32 mm outside dia 45 cms long duly 340 No

welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, erected

on wall or corner for mounting street light luminaire with necessary

hardware materials duly painted.

SUB - TOTAL OF External Lighting

7.1 1 Supplying & erecting approved make Automatic liquid level 2332 Job

controller 6A. with sensor testing as per instruction of Engineer

in charge on site complete with wiring connection with existing

wires , with copper conductor from pump to upper and lower tank.

7.2 Supplying and erecting Flexible PVC insulated multistrand

multicore 1.1 kv grade ISI marked copper wires of following size to

be erected as directed.

90 e) 1.50 Sq.mm 3 core round PVC sheathed 46 Mtr

7.3 Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved

manner as directed .

7.4 1 Providing & erecting water cooler having storage capacity 150 Ltr. 55340 No

& cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by 15˚C within a hour,

The water cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete with necessary

inlet & outlet connection. The body of water cooler will be made

from Stainless Steel.

7.5 1 Supplying and erecting water filter cum purifier with ultra violate 5371 No

technology. (Aquaguard / waterdoc model or equivalent symphony/

crystal/videocon model)

7.6 Providing & erecting open well horizontal mono block pump set

with cast iron body, complete for three phase submersible motor

2 [B] For 2 HP 3 phase open well horizontal mono block pump set 10628 No

suitable for 200 LPM @ 25 mtr head suitable for 50 mm dia delivery

7.7 Supplying & erecting approved make motor control cubical

panel (Direct - on - line) made from 16 G. CRCA sheet duly epoxy

powder painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer, indicating lamps

for R- Y - B phases, overload relay, Automatic water level

controller, Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor & overload

relay, start - stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload relay &

contactors will be of L & T, Siemens or BCH make only.

2 (a) DOL up to 5.0 H.P. 7646 No

7.8 1 Charges for doing liasioning work for obtaining the necessary 16949.15 No

clearances from the Electrical inspector / competent Authorities for

the total Electrical installation,co-ordinating with various agencies.

All necessary drawings, calculations, test certificates, etc. as

required by these authorities shall be prepared and furnished by

the EPC Vendor. Any modification/rectification as required by these

authorities shall be carried out by theEPC Vendor at free of cost.

The fees required to be paid to these authorities for inspection shall

be borne by Owner on production of documentary evidences.

7.9 online Un-interruptible Power Supply system

Supplying and erecting approved make online Un-interruptible

Power Supply system comprising flat cum-boost charger with IGBT

base rectifier & Inverter & sealed maintenance free SMF batteries.

The charger having operating capacity for input 160-270V AC &

inverter having output 230V,50 Hz Ac with 0.8 load power factor

with battery, over/under voltage output with over load & short circuit

protection equipment. The system housed in CRC sheet duly

powder coated paint with following power backup.with MS painted

batteries stand, 10% Overload capacity for momentary load.

1 (C) 3 KVA with 1Hr Backup 82120 No

7.10 Providing and erecting approved make split air-conditioning unit

consisting of copper condensing unit with fan motor, hermetically

sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes powder coated

Stand, Eco Friendly green gas charging, 15A plug top & Remote

Control) with necessary core cutting.

(1)For ISEER Range (KWH/KWH)(3.1 to 3.99) Premium

7.10.3 9 (c) for 1.7 to 2.0 ton capacity 58706 No

7.11 Supplying and installing MS angle , powder coated / Painted

standard type of wall/floor stand mount for outdoor unit of split AC

of following capacity, erected with necessary hardware materials

9 (A) 25mm*25mm*3mm thick M.S angle suitable for upto 2 TR. 1305 No

Capacity of ac machine

7.12 120 Supplying and erecting insulated pair of soft copper tubing 956 RMT

including power and control cable,necessary PVC drain pipes for

Split AC machine up to 4 TR capacity

7.13 Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile

rubber insulation.

7.14 170 Supplying & fixing 50mm thick TF quality expanded polystyrene for 409 Sq.Mtr

underdeck insulation on slab/wall /shaft exposed to

sun/atmosphere as per specifications.

7.15 1 Supply, installation, testing & commissioning of 5 FEET Length AIR 36800 No

Curtain for Hall doors that are exposed to ambient, with all

necessary accessories and mounting fixtures, Air curtain have

Stainless Steel body ( 304 grade), Max. Air velocity at nozzle :

m/s, 2700/2100 RPM, 1380 CFM,Noise level 50-55db,No. of

Blowers : 5, 220V/1P/50hz ,700w motor suitable for

continues/intermittent functioning.

7.16 1 Supply, installation, testing & commissioning of 6 FEET Length AIR 47424 No

Curtain for Hall doors that are exposed to ambient, with all

necessary accessories and mounting fixtures, Air curtain have

Stainless Steel body ( 304 grade), Max. Air velocity at nozzle :

m/s, 2700/2100 RPM, 1490 CFM,Noise level 50-55db,No. of

Blowers : 6, 220V/1P/50hz ,820w motor suitable for

continues/intermittent functioning.

SUB - TOTAL OF MISC. Work

Final specification and block diagram shall be submitted by

CCTV camera system vendor.

8.1 8 Supply,installation,Testing and Commissioning of 5MP, 9208.52 No

1/2.7"CMOS,IP Fix Dome camera, 2592x1944@30fps IR

2592x1944@30fps IR Range:30M,120dB WDR Triple-Stream

(Main/Sub/Third),Built-in Mic, SD Card Slot up to 256GB, Multiple

AI Support,Metal, IP67. Built-in-mic , 3.6mm , Color 0.003lux @

F1.6(AGC ON) ; B/W 0 lux @ IR ON, H.265+/H.265/H.264 Video

compressions, Privacy masking Off/On (4 Zone, Rectangle), Face

Recognition (FR), Human & Vehicle Detection (PD & VD),

Perimeter Intrusion Detection (PID),Line Crossing Detection (LCD),

Cross Counting (CC), Stationary Object Detection (SOD),Heat Map

(HM), Crowd Density Detection (CD), Queue Length Detection

(QD), Rare Sound Detection (RSD), Main Stream @30fps,ONVIF(

Profile S/G/T) CE,FCC,RHOS,BIS, ISO9001 certified, DC12V /

POE ( IEEE802.3af)

8.2 3 Supply,installation,Testing and Commissioning of 5 MP IP Fix 9114.87 No

Bullet, 1/2.7" CMOS,2592x1944@30fps IR Range: 30M, 120dB

WDR Triple-Stream (Main/Sub/Third), Built-in Mic, SD Card Slot up

to 256GB, Multiple AI Support, Metal, IP67,Built-in-mic , 3.6mm

Color 0.003lux @ F1.6(AGC ON) ; B/W 0 lux @ IR ON,

H.265+/H.265/H.264 Video Compressions, Privacy masking Off/On

(4 Zone, Rectangle), Face Recognition (FR), Human & Vehicle

Detection (PD & VD), Perimeter Intrusion Detection (PID),Line

Crossing Detection (LCD), Cross Counting (CC), Stationary Object

Detection (SOD),Heat Map (HM), Crowd Density Detection (CD),

Queue Length Detection (QD), Rare Sound Detection (RSD), Main

Stream @30fps,ONVIF( Profile S/G/T) CE,FCC,RHOS,BIS,

ISO9001 certified, DC12V / POE ( IEEE802.3af)

8.3 24 Port Gigabit Smart Managed PoE Switch

8.3.1 1 SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP 31680 No

Combo ports Advanced L2 switching and security features L2+

Static Routing Optional “standard mode” or “surveillance mode”

management user interface 193 W PoE budget (Including Five

year free maintenance with guarantee)

24 Port Loaded Patch Panel

8.4 1 SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully 4357 No

Loaded (Including Five year free maintenance with guarantee)

8.5 1 S.I.T.C. of 16CH,4SATA NVR having Through put: 320 Mbps 22300.22 No

incoming / 320Mbps outgoing, 4SATA interfaces, up to 12TB

connect camera at up to 12MP, 2 x RJ45, 2HDMI Port,1 VGA Alarm

input/out : 16in / 1out, Play back 1080P: 480fps,Max. 16CH,Audio:

G.711a,G.711u Video:H264/H265,WEB IE 10/11,Safari V12.1

above, Edge V.79 above,FireFox V.52 above, cloud storage (

Dropbox & Google Drive),Onvif ( profile S/G/T) USB2.0*1 front,

USB3.0*1 Rear,Face Detection & recognition,Vehicle & Pedestrian

Detection,Perimeter intrusion detection,Cross counting,Heat

Map,crowd density detection,Object detection,Video

Tempering,QueueLength detection, License plate detection,Rare

sound detection,Region Entrance & Existing, CE,FCC,RHOS,BIS

,ISO 9001 certified.

CAT 6 UTP Keystone Jack

8.6 11 SITC of Jack Cat 6 Keystone UTP (Including Five year free 160 No

maintenance with guarantee)

CAT 6 UTP Cable

8.7 Supplying & erecting approved make LAN cable of following size in

existing pipe as per direction

350 [C] CAT - 6 47 Mtr

8.8 Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved

manner as directed

290 (b) 25 mm 33 Mtr

Wall mount Rack

8.9 Supply installation testing and commissioning of weatherproof

outdoor type Rack (Final size is to be calculated by contractor base

on drawings and actual requirement of site)

This Enclosure is made by using Premium grade raw material of

CRC MS Steel. Front Lockable Door and closed on all three sides.

Fully powder coated by Light Grey(RAL7035) Colour.

Rack is tobe provide with Power distribution units of required 5A,

pin socket with switch, Horizontal / Vertical cable manager, Cooling

fan, Hardware, Horizontal / cantilever tray etc. complete as per site

8.9.1 1 3U wall mount Rack 5025 No

8.9.2 1 9U RACK INDOOR TYPE 12053.57 No

CAT 6 Patch cord 1 Mtr. Long

8.10 24 AWG, Multi Strands, Conductor Metal:- Bare Copper, Pure

Copper Insulation Material:HDPE,Outer Jacket:FR-PVC,Heat

Resistance:-60 Degree Celsius Conductor : 24 AWG Multi-strands

Conductor Metal : Bare Copper Insulation Material : High Density

Polyethylene Outer Jacket: FR-PVCHeat Resistance : 60º C

Insertion Cycles : 750 times

12 SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag 155 No

Junction Boxes for CCTV Camera

8.11 11 Supply, installation, fixing, testing and commissioning of PVC 440 No

Junction box for CCTV Camera, IP65, outdoor application. Junction

Box size will be as per vendor's requirement and site condition.

8.12 1 Supply, Installation Testing & Commissioning 5 Mtr. HDMI 820 No

Interface Cable as per the detailed Specifications supports

transmission of 4K Signals as per the detailed Specifications

8.13 1 Supply, Installation, Testing and Commissioning of 43 inch, 53465 No.

Professional LED Display Cum Commercial TV with Android 11 &

Inbuilt play store, UHD resolution, 400 nits brightness, It's 24*7

usage, 50,000 hours life, 3 years warranty, Android 11 with inbuilt

play store, Inbuilt wifi, Landscape / Portrait mode, Inbuilt Bluetooth,

2 GB / 16 GB Memory, Inbuilt SOC with HDMI cable

8.14 2 Supply, Installation , Testing and Commissioning of 6TB 18500 No

Surveillance Hard Disk .

SUB - TOTAL OF CCTV Work

9.0 COMPREHENSIVE Maintenance

Annual Comprehensive Type Maintenance Contract of

ELECTRICAL + ELV + HVAC System and passenger Elevator

For 1-Year DLP + ONE Year.

9.1 1 Annual comprehensive Type Maintenance Charges only During FREE Year

Guarentee / Defect Liability period.

9.2 1 Annual comprehensive Type Maintenance Charges for 1st Year 62024.38 Year

after Guarentee / Defect Liability period.

SUB-TOTAL Of ANNUAL Comprehensive Maintenance

contract Of Electrical / ELV /HVACand passenger

Unit Rate Amount

I. No. Qty Items Per

Internal / External Hydrant

Supplying, Installation, Testing and Commissioning of electric

driven main Hydrant fire pump suitable for automatic operation

and consisting of following: complete in all respect as required.

1.1.1 1 a) Horizontal type, single stage, centrifugal, end suction pump of 230151 Set

cast iron body & bronze impeller with stainless steel shaft,

mechanical seal to ensure a minimum pressure of 3.5 kg/sq. cm. at

highest and farthest outlet at specified flow of 2280 lpm at 65 Mtr.

head conforming to IS 1520.with suitable size of footvalve

confirming to IS 4038, Pressure rating PN2 , preventing entry of

foreign body to pump through suction pipe, perfectly flat seating

surfaces for good sealing.

b) Suitable HP Squirrel cage induction motor, TEFC, suitable for

opertion on 415 volts, 3 phase 50 Hz. AC with IP 55 class

protection for enclosure, horizontal foot mounted type with Class -

'F' insulation, conforming to IS-325.

c) M.S. fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required.

d) Suitable cement concrete foundation duly plastered with anti

vibration pads.

The pump shall be capable of giving not less than 150% discharge

at ahead not less than 65% of the rated head.

1.2 1 Fabrication, Supplying, Installation, Testing & Commissioning of 311460 No

electrical control panel of cubical construction, floor mounted type,

fabricated out of 2mm thick CRCA sheet, compartmentalised with

hinged lockable doors, dust and vermin proof, powder coated of

approved shade after 7 tank treatement process, cable alley, inter-

connection, having switchgears and accessories mounting and

internal wiring, earth terminals, numbering etc. complete in all

respect, suitable for main fire pump, pressurisation pump complete

as per CPWD specification with following in coming and Outgoings,

suitable for operation on 415V, 3 phase, 50Hz Ac Supply with

enclosure protection class IP 42 as required :suitable for operation

on 415 V, 3 phase, 50 HZ, AC supply with enclosure protection

class IP 42 as required.

A. Incoming Feeder:-

(i) 1 No of 250 A,35KA, 415V,FP MCCB with Thermalmagnetic

Based Releases having O/C, S/C ,E/F protection, Digital ELR

96x96mm with CBCT, FP Spreader Terminals 1 set= 8 Pcs,

Extended Rotory Handle for MCCB, 240V AC Shunt Trip coil for

(ii) LED type indicating Lamp with suitable rating 2 Amp SP MCB:-

1 Set (each set comprise of R,Y,B)

(iii) Digital type 3 phase Multi function Meter with suitable rating of

MCB & 3 Nos. of single core epoxy resin cast type CTs of 250/5

Amps, 10 VA, CL 1.0 ratings -1 Set.

415 V, 200 Amps, FP Aluminium Busbars with Heat shrinkable

color code insulation sleeves.

OUTGOINGS:-( All outgoing feeders for pumps should have digital

Ammeter with selector switches and LED type ON,OFF,Trip

indicating Lamps )

1 sets - 160 A, 25kA TPN MCCB, Ics=100% Icu, with fully

automatic Star/Delta starter suitable for 85 HP pump with overload

protection, current sensing type single phase preventor complete

with all acceessories and internal wiring required for automatic

operation,selector switch for local/remote, auto/manual/OFF

1 sets - 160 A, 25kA TPN MCCB, Ics=100% Icu, with fully

automatic Star/Delta starter suitable for 85 HP pump with overload

protection, current sensing type single phase preventor complete

with all acceessories and internal wiring required for automatic

operation,selector switch for local/remote, auto/manual/OFF

1 no.63A,16KA MCCB Ics=100%,Extended Rotry handle with TM

release having O/C & S/C protection with 12.5 HP fully automatic

star/ delta starter , current sensing type, Single Phase Preventer,

ON/OFF Push Button & LED type Indicating lamps complete with

all accessories and internal wiring required for automatic operation,

selector switch, for local/remote, auto/manual operation

Diesel Engine Control.

Control for Diesel Engine comprising:

i) Auto/Manual selector switch & 3 attempt starting device, timers

and relays as required, push buttons, start/stop in manual mode.

ii) LED type Indication lamp for High/Low Lub. Oil pressure, High

Water Temp and Engine ON indication.

iii) Battery charger suitable for 12 V/24 V DC with boost and trickle

selector switch, 0-30 V DC volt meter, 0-20 Amp DC Ammeter.

iv) All standard relays, accessories for automatic operation of

diesel engine, wiring with 1.5 sq mm PVC insulated copper wire

between various sensors and system controller / starter, suitable

size cable for battery charging etc. as required.

System Controller

Designing, Supply, Installation, Testing and Commissioning of

system controller to control operation of Main Electric Fire Pump,

Diesel Pump, Pressurisation Pump, in sequence as per

specification consisting of relays, timers, sensors, annunciation

window for fault indication, control wiring complete as specification.

3 NOS. 25A DP MCB " C " Curve

1.3 PRESSURE GAUGES , Air vessel AND SWITCHES

1.3.1 2 Providing, fixing, testing and commissioning of Pressure Switch 1329.87 Set

with Needle Valve.

1.3.2 2 Providing and fixing in position the industrial type pressure 967.73 Set

gauges with gun metal / brass valves complete as required

1.4 Providing, laying, testing & commissioning of 'C' class heavy duty

MS Pipe conforming to IS 1239 i/c fittings like elbows, tees,

flanges, tapers, nuts bolts, gaskets etc., in ground including

excavation and providing cement concrete blocks as support,

anticorrosive treatment with coaltar/asphalt tape as per IS

refilling the trench etc. of following sizes complete as required .(

15 100MM Dia 2300.63 Mtr

1.5 Providing, laying, testing & commissioning of 'C' class heavy duty

MS pipe conforming to IS 3589/IS 1239 including Welding, fittings

like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing

the pipe on the wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint of

required shade complete as required :

1.5.9 2 200mm Dia ( wall thickness 6.3mm ) 4938.01 Mtr

1.6 Supplying and fixing Single headed internal / External hydrant

valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless

Steel coupling and cast iron wheel,ISI marked, conforming to IS

5290 (type A) with blank Gunmetal/Stainless Steel cap and chain

3 Single headed Stainless steel 5549.04 No

1.7 3 Providing, fixing, testing and commissioning of Wall mounting 10499.50 No

swing type first aid Fire Hose Reel with drum, hanging bracket,

M x 25 mm dia high pressure hose reel tubing as per IS:884 with

shut nozzle and ball valve and all required accessories.

1.8 3 Supplying, Installation, Testing and commissioning of weather 4726.5 No

proof Fire Hose cabinet size 900x 600x300mm to house fire

hydrant & hose, including all other related accessories

fabricated from M.S. sheet (16 Gauge) of fully welded construction

having front door with locking arrangement, partially glazed with

mm thick glass. Cabinet shall be powder coated & painted with

post office red colour

1.9 6 Providing ISI marked RRL (IS : 636, type‐A) fire hose pipe 15 meter 4020.55 No

long and 63 mm dia with ISI marked (IS : 903) Stainless steel male

and female coupling bound and rivetted to hose pipes with copper

rivets and copper wire complete as required.

1.10 3 Providing Stainless steel ISI marked 63 mm. dia. male 1502.28 No

Instantaneous pattern short branch pipes with 20 mm dia. Nozzle

as per IS : 903, suitable for 10 Kg/sqcm operating pressure and

suitable for interconnections to hose pipe coupling as required.

1.11 Supplying and fixing of fire brigade connection of cast iron body

with gun metal male instantaneous inlet couplings complete with

cap and chain as reqd. for suitable dia MS pipe connection

conforming to IS

1 2 way - 100 mm dia M.S. Pipe 6094.09 No

1.12 1 Providing, fixing, testing and commissioning of 25 mm dia Air 1949.25 No

Release Valve and Ball Valve assembly on top of each riser for

Air release system.

1.13 3 Supplying and fixing orifice plate made out of 6 mm thick stainless 1932.76 No

steel (Grade 304) with orifice of required size to be fitted between

flange & landing valve of external and internal hydrants to reduce

pressure at the outlet to the level of 3.5 kg/cm2 complete as

1.14 Supplying, fixing, testing and commissioning of butterfly valve of

PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete

with nuts, bolts, washers, gaskets conforming to IS 13095 of

following sizes as required :

1.15 Providing, installation, testing and commissioning of non-return

valve of following sizes confirming to IS:5312 complete with rubber

gasket, GI bolts, nuts,washers etc.as required :

1.16 Providing, installation, testing and commissioning of stainless steel

Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade

304, sheet with 3 mm dia holes with stainless steel flange.

1.17 3 Supply, Installation, Testing and Commissioning of Brass. Ball 737.27 No

Valves with all fittings required. 25mm size

1.18 Supplying and erecting Flexible PVC insulated multistrand

multicore 1.1 kv grade ISI marked copper wires of following size to

be erected as directed.

40 f) 1.50 Sq.mm 4 core round PVC sheathed 67 Mtr

1.19 2 SITC of fire pump start stop push buttons in box. 954.50 No

1.20 1 SITC of 2 Zone standalone Fire Alarm control Panel, 16X2 9300 No

Character LCD Display, provision for zone wise contact and

sounder. Panel does not have provision to connect Repeater

Panel. Make: Ravel Approval: CE Mark. (Including Five year free

maintenance with guarantee)

1.21 Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved

manner as directed

40 (b) 25 mm 33 Mtr

1.22 2 Supply, Installation, Testing and Commissioning of Single action 1201.75 No

Manual Pull Station.Shock and Vibration Resistant, pull Down

Lever Remains Down Until Reset. Shall be Polarity Insensitive (with

all mounting accessories , complete with Junction Box for mooting

on Surface, Cable lugs at Ends, cable compression glands, cable

tags and ferruling.

1.23 2 Supply, Installation, Testing and Commissioning of Conventional 1201.75 No

Sounder cum strobe having tone settings with range of 95dbA and

field selectable 15/30/75/110 candelas.(with all mounting

accessories , complete with Junction Box for mooting on surface,

cable lugs at ends, cable compression glands, cable tags and

CABLES AND TERMINATIONS

1.24 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cable.

36 (B) 3 core 4 Sq. mm 285 Mtr

1.25 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cable.

30 (D) 3 core 10 Sq. mm 495 Mtr

1.26 Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

1.27 Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

1.28 Providing and fixing approved make Perforated C type cable tray.

Made from sheet steel. The cable tray should be single or double

bended as per required and as per IS 2062/1079 and shall be

coated with hot dip galvanizing as per IS 2629/4759. with max

17.5% perforation with coupler plate / Fish plate and GI hardware

like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer in

1.28.1 10 (1) 50 X 50 X 1.6 mm Thick 302 RnMtr

1.29 1 Supply, installation,testing and commissioning of Chemical 12230 E.a.

Earthing with UL Certified 17.2mm Dia. X 3000mm Long

Micron-Copper bonded M.S. Rod manufactured as per IEC 62561-

2 with 25Kg Bentonite powder plus " U " bolt rod clamp complete

with Lockable high performence chamber suitable & tested for

5000T capacity with SS Hardware.or equivalent

1.30 2 Supplying, Installation, Testing and commissioning Sewage water 19676.50 No

submersible pumping sets of CI casing & impeller, SS shaft,

including with inbuilt water level sensors for operating the pumps

automatically and all accessories suitable for operation on 220 V-

240 V, single phase, 50 Hz. AC supply etc. as reqd.

> 10 mm solid handling capacity,Minimum Capacity -

LPM,Minimum Head > 13.5 Mtr

1.31 1 Charges of Preparing Design , Drawings ,Testing of Fire Fighting 42372.88 job

System with necessary Approval from Local Fire authority.(

Including Pre-NOC and NOC from Fire authority. )

1.32 Providing, fixing, testing and commissioning of below Auto Glow

1.32.2 3 Fire Equipment: 4" X 12" 514.97 No

1.32.3 3 Fire Extinguishers 8"x 4" 480 No

1.32.4 3 Fire Hydrant 4” X 12” 514.97 No

1.32.5 3 Fire Hose Reel.4” X 12” 514.97 No

1.32.6 2 DCP Extinguisher 8"x 4" 480 No

1.32.7 2 CO2 Extinguisher 8"X 4" 480 No

1.33 Providing, fixing, testing & commissioning of 15mm dia quartzoid

bulb type sprinklers of rating with required accessories :

1.33.1 25 Pendent Sprinkler 57°C standard response (K-80) UL Listed 362.25 No

1.33.2 2 Pendent Sprinkler 68°C standard response (K-80) UL Listed 471.50 No

1.34 Supplying, installation, testing & commissioning of sprinkler flexible

pipe (UL Listed) of stainless steel complete with 15 NPT on reducer

thread with maximum working pressure of 175 PSI test pressure of

875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to

sprinkler head (Outlet) 15mm NPT female thread with reducer,

nipple, 2 side brackets,center bracket, stockbar of following sizes

complete as required etc of following sizes as required:

SUB-TOTAL OF FIRE HYDRANT System

2.0 FIRE EXTINGUISHERS

FIRE EXTINGUISHER

2.1 3 FIRE EXTINGUISHER Supplying, Installation, Testing and 2724.25 No

commissioning of Dry Chemical Powder (DCP) 6 Kg Fire

Extinguisher Mono Ammonium Phosphate Powder 40, Stored

Pressure Type, Pressure Gauge, Controllable discharge

mechanism Class A, Rating 3A & Class B rating 21B as per IS

15683 ISI MARK (ABC Dry Chemical Powder - MAP 40%)fitted with

required accessories including wall suspension brackets.

2.2 3 Supplying, fixing, testing and commissioning of CO2 type Fire 6526 No

Extinguisher of capacity 4.5 kg filled with Co2 Gas as per IS

with controll discharge mechanismfitted with Hose & Horn

applicable on Class B fire rating 21B confirms to IS 15683, bearing

ISI mark. Co2 Cylinder as per IS

2.3 1 Providing & fixing of ISI marked water CO2 type Portable fire 3450 No

extingusher,9 LTR capacity, Hydraulic test pressure 35Kgf/ cm2,

Discharge range 2 Mtr,Average discharge time: Min. 13Sec,Fire

Rating 3A,Grade: IS:15683.

2.4 1 Providing & fixing of ISI marked, Squeeze Grip Cartridge Type 4200 No

water CO2 type Portable fire extingusher,9 LTR capacity, Hydraulic

test pressure 35Kgf/ cm2, Discharge range 2 Mtr,Average

discharge time: Min. 13Sec,Fire Rating 3A,Grade: IS:15683.

SUB TOTAL of FIRE EXTINGUISERS

3.0 Annual Comprehensive Type Maintenance Contract of for

Above Fire Fighting System For 1-Year DLP + ONE Year

Every six months Testing certificates with Photographs should

be sent to competent authority by concern contractor.

3.1 1 Annual comprehensive Type Maintenance Charges only During 1st 0 Year

Year DLP / Defect Liability period.

3.2 1 Annual comprehensive Type Maintenance Charges for 1st Year 35601.39 Year

after Guarentee / Defect Liability period.

SUB TOTAL of Annual Comprehensive Maintenance of

Fire Fighting Sytem

Window Curtains

Providing & Fixing in Position Vertical Roller Blinds with

Minimum 3 % and Maximum 5 % Light Transperace Screen

Fabric Incuding Providing & Fixing of Powder coated G-

Channel at the Topof Window with necessary Screw , Cleats

etc. and PVC Roller ( Weight Pipe) and PVC Chain For Up

and Down Movement of Blinds etc. of Approved Make and as

per Drawings / Instruction of Engg. in Charge For All Colors

and Shades. Rates Includes all Lead and Lift For All Floor

Level, All Height , All Material , Accessories, Fixing

Scaffolding , Labor etc. Complete in All Respects. All

Required Accessories & Material must be From Same

Manufacturer. 1,372.03 Sq.mt.

Providing & Fixing Sun Control Reflective Type Film / Frosted

2 35 Film as Selected by Architect/ Engg. In Charge For Glass

Doors / Windows etc. as Directed. 646.37 Sq.mt.

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT- NORTH WEST ZONE

Name of Work : CONSTRUCTION OF PHYSIOTHERAPY CENTER AT F.P.NO :- 122, T.P.NO :-

(GOTA) IN CHANDLODIYA WARD, NORTH WEST ZONE, AHMEDABAD.

FINANCIAL BID (Online Only)

Sr.No. Description Amount

1 Amount For Civil Work Rs.1,28,39,558.92

Amount For Electrical Work with Annual Comprehensive Maintenance for

Years after completion of DLP of 1 Year Rs.

Amount For Fire Fighting System Work with Annual Comprehensive

Maintenance for 1 Years after completion of DLP of 1 Year Rs.

4 Amount For Window Curtains Rs.

I/We am/are willing to carry out work at ______% above / below (should be written in figures and words)

the estimated cost mentioned above.

Estimated cost put to tender : Rs.1,69,12,859.49 Estimated cost put to tender : Rs.1,69,12,859.49

Add_____% above : Rs ___________ Deduct_____% below : Rs __________

In words : Rupees _______________________ In words : Rupees_____________________

Signature of contractor Additional City Engineer ( N.W.Z. )

Seal Ahmedabad Municipal Corporation