Tender for Erection & Maintanance of HT ,UG, LT,TC and other work in various villages under various scheme Under jurisdiction of Pardi Rural Sdn Under Vapi Rural Division.

(A) CAPITAL WORK LABOUR RATES FOR FY 2024-25 (WITHOUT GST)

Sr. No. Item Code Item Unit Rate for FY 2024-

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS ARMS, CLAMPS ANTI-

CLIMBING DEVICES, DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF

1 9926000001 FABRICATED MATERIALS AND NUMBERING COMPLETE WITH COST OF PAINTS AS PER STANDARD No.

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF EARTH,

FIXING OFCROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES, INSULATORS ETC.

2 9926000002 COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING No.

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET

ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING EXCAVATION OF PIT AND REFILLING

OF EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS ANTI- CLIMBING DEVICES, DANGER

3 9926000003 BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF STEEL POLE, FABRICATED MATERIALS No.

USED ON THE POLEAND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY CROSSING ON BG/MG/NG LINE FOR

0.400/11/22KV OVERHEAD LINES I.E INCLUDING EXCAVATION OF PIT & REFILLING OF EARTH,

FIXING CROSS ARMS, TOP FITTING CLAMPS,ANTI-CLIMBING DEVICES DANGER BOARD,

4 9926000004 INSULATORS ETC. COMPLETE AND PAINTING OF STEEL POLES, FABRICATED MATERIALS USED ON No.

THE POLES AND NUMBERING WITH COSTOF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF EARTHING, FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING DEVICES DANGER BOARDS,INSULATORS ETC.COMPLETE AND

5 9926000005 PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF No.

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO 11 METERS.STEEL POLE INCLUDING

EXCAVATION OF PITS & REFILLING OFEARTH, FIXING OF CHANNELS, SUPPORTING ANGLES,

CLAMPS,ANTI-CLIMBING DEVICES DANGER BOARDS, INSULATORS ETC.COMPLETE & PAINTING OF

6 9926000006 POLES,FABRICATED MATERIALSUSED ON THE POLES AND NUMBERING WITH COST OF PAINTSAS No.

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH, HG FUSES OF 8 MTRS

200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH,FIXING OF

CHANNELS SUPPORTING ANGLES, CLAMPS, ANTI- CLIMBING DEVICES, DANGER BOARDS,

7 9926000007 INSULATORS,DOFUSES ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE No.

POLES AND NUMBERING WITH COSTOF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDINGOF ERECTION OF GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH,HG FUSES, 9 TO

METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, FIXING

OFCHANNEL, SUPPORTING ANGLES, CLAMPS, ANTI- CLIMBING DEVICES , DANGER BOARDS,

8 9926000008 INSULATORS, ETC. COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE No.

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX. OF 8 METER,200KG PSC POLE

METERS POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS

9 9926000009 CROSS ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND CABLE No.

WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USEDON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH,HG FUSES

TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES

INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH CARTING OF TRANSFORMERS FROM

STORE TO SITE, FIXINGOF CHANNELS SUPPORTING ANGLES, BRACING, CROSS ARMS,CLAMPS,

10 9926000010 ANTICLIMBING DEVICES, DANGER BOARDS,CONDUCTOR AND CABLE WIRING ETC. COMPLETE AND No.

PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND NUMBERING AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTIONS OF GUY SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH AS PER

11 9926000011 STANDARD SPECIFICATION WITH STAY CLAMPS, STAY WIRE, ANCHOR ROD, TURN BUCKLE, No.

EYEBOLT, GUY INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT EXCLUDING CONCRETING.

12 9926000012 CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF CEMENT SAND METAL (1:2:4) AND CMT

WATER ETC. AS PER STANDARD SPECIFICATION.(cement Should be 53 grade) used for Concreting.

13 9926000013 ERECTION OF COIL TYPE EARTHING INCLUDING COST OF COAL,SALT ETC. BUT WITHOUT COST OF No.

GI WIRE AS PER STANDARD SPECIFICATION(20kg salt+20kg coal)

14 9926000014 ERECTION OF GI PIPE/CI PLATE TYPE EARTHING INCLUDINGCOST OF COAL SALT ETC. BUT No.

WITHOUT COST OF PIPE/GIPLATE GI WIRE AS PER STANDARD SPECIFICATION.(20kg solt+20kg

15 9926000015 ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH CLAMPS, BRASS NIPPLE, BRASS HOLDER No.

TECK WOOD BUSH,REFLECTORS FUSE, WIRING ETC. AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

16 9926000016 STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA CONDUCTOR for ALL TYPE OF CONDUCTOR ONE COND PER

(EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING FIXING OF INSULATORS, KM

BINDING JUMPERING ETC.

17 9926000017 STRINGING OF GI WIRE 8 SWG INCLUDING BINDING JUMPERING ETC. DO

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC 2.5/4MM2 TWIN CORE CABLE FROM

TERMINAL POLE TO METERING POINT INCLUDING FIXING OF METER WITH METER EARTHING

18 9926000018 COMPLETE WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS. No.

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH PVC 4MM2/10MM2 FOUR CORE

CABLE FROM TERMINAL POLE TO METERING POINT INCLUDING FIXING OF METER WITH METER

19 9926000019 EARTHING COMPLETE WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF No.

20 9926000020 ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA FOR ERECTION OF POLE/ GUY No.

ETC. AS PER STANDARD SPECIFICATION OVER & ABOVE NORMAL COST COVERED AGAINST

EXCAVATION OF PIT UNDER NORMAL SOIL FOR ERECTION OF POLE,GUY, DOUBLE POLE

STRUCTURE EARTHING WITH THE APPROVAL OF SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

22 9926000022 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

25 9926000025 Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING,HT LINE CROSSING AND No.

TELEPHONE LINE CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH , HG FUSES,TRANSFORMERS, LIGHTENING

ARRESTOR, DISTRIBUTION BOX. ON 8 METERS 200 KGAND PSC POLE INCLUDING EXCAVATION OF

PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF

CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES

26 9926000026 DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF No.

FABRICATED MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING OFAB SWITCH , HG

FUSES,TRANSFORMERS, LIGHTENINGARRESTOR, DISTRIBUTION BOX. ON 9 to 11 METERS RSJ

POLE INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS

27 9926000027 CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING No.

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLE AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF

EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES, INSULATORS ETC.

28 9926000028 COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING No.

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS 270 KG PSC POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF EARTHING, FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING DEVICES DANGER BOARDS,INSULATORS ETC.COMPLETE AND

29 9926000029 PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF No.

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

30 9926000030 STRINGING OF 100MM2 ACSR/100MM2 AAAC CONDUCTOR FOR 11/22KV & LT LINES INCLUDING ONE COND PER

FIXING OFINSULATORS, BINDING JUMPERING ETC. KM

31 9926000031 STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT LINES INCLUDING FIXING OF INSULATORS, ONE COND PER

BINDING JUMPERING ETC. KM

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX. OF 10 METERS 270 KGAND PSC

POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROMSTORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS

32 9926000032 CLAMPS, ANTI-CLIMBING DEVICES,DANGER BOARDS, CONDUCTOR AND CABLE WIRING No.

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SETS AND EARTHING.

33 9926000033 DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE & STACKING No.

OF POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

34 9926000034 DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE & STACKING No.

OF POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITH TRANSFORMER) WITH

35 9926000035 CREDITING OF FABRICATION & TRANSFORMER AT STORE & STACKING OF POLE SAFELY ON ROAD No.

SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITHOUT TRANSFORMER) WITH

36 9926000036 CREDITING OF FABRICATION AT STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR No.

CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM INCLUDING FITTING OF ALL ACESSARIES I.E.

SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR

37 9926000037 ETC. FOR FIXING OF MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON AERIAL KM

BUNCH CABLE BY INSULATED PIERCEING CONNECTORS THROUGH SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT

38 9926000038 SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND TO PROVIDE SERVICE KM

CONNECTION ON AERIAL BUNCH CABLE BY INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM INCLUDING FITTING OF ALL ACESSARIES

I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, BINDING TO PIN

39 9926000039 INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS REQUIRED & DIRECTED BY ENGINEER KM

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM INCLUDING FITTING OF ALL ACESSARIES

I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, BINDING TO PIN

40 9926000040 INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS REQUIRED AND DIRECTED BY KM

ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT

41 9926000041 SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND TO PROVIDE SERVICE KM

CONNECTION ON AERIAL BUNCH CABLE BY INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

42 9926000042 DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING THE OLD MATERIAL TO STORE No.

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC POLE(WITHOUT

43 9926000043 TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE AND STACKING OF POLE SAFELY ON No.

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC POLE(WITH TRANSFORMER)

44 9926000044 WITH CREDITING OF FABRICATION AT STORE AND STACKING OF POLE SAFELY ON ROAD SIDE OR No.

CREDITING TO DEPARTMENTAL STORE

45 9926000045 DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND CREDITING FITTING OF ALL KM

ACESSARIES AND FABRICATION TO DEPARTMENTAL STORE

46 9926000046 DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND CREDITING FITTING OF ALL KM

ACESSARIES AND FABRICATION TO DEPARTMENTAL STORE

47 9926000047 DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND CREDITING FITTING OF ALL KM

ACESSARIES TO DEPARTMENTAL STORE.

48 9926000048 DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM AND CREDITING FITTING KM

OF ALL ACESSARIES TO DEPARTMENTAL STORE.

49 9926000049 DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM AND CREDITING FITTING KM

OF ALL ACESSARIES TO DEPARTMENTAL STORE.

50 9926000050 RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT LINES ONE COND PER

INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC. KM

51 9926000051 RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES INCLUDING , BINDING JUMPERING ONE COND PER

52 9926000052 LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER. (METER WILL BE PROVIDED BY No.

53 9926000053 LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER AND OLD METER SHOULD BE CREDITED No.

TO SDN STORE. (METER WILL BE PROVIDED BY DGVCL)

54 9926000054 LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER CONNECTION. (CT COIL WILL BE PER CT

PROVIDED BY DGVCL)

55 9926000055 LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR METER CONNECTION AND OLD CT PER CT

SHOULD BE CREDITED TO SDN STORE. (CT COIL WILL BE PROVIDED BY DGVCL)

56 9926000056 LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB WILL BE PROVIDED BY DGVCL) No.

57 9926000057 LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX. (METER WILL BE PROVIDED BY DGVCL) No.

58 9926000058 PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER CABLE 3.5 METER (CABLE TO BE No.

PROVIDED BY AGENCY)

59 9926000059 LABOUR CHARGE FOR PROVIDING/RECONNECTION OF TERMINAL CONNECTION WITH PROPER PER TERMINA

SIZE OF LUGS. (LUGS COST IS BORNE BY AGENCY) TION

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL SURVEY OF DEFECT IF

ANY. A DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY IN PRO- FORMA REPORT SHOULD BE

60 9926000060 SUBMITTED TO SDN OFFICE.(* ONLY IF ALL PARAMETER OF VOLTAGE, CURRENT & LOAD AS PER DTR

SHOWN IN PER-FORMA IS FILLED) AS PER THE INSTRUCTION OF ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL SURVEY OF DEFECT IF

ANY. A DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY IN PRO- FORMA REPORT SHOULD BE

61 9926000061 SUBMITTED TO SDN OFFICE. (DULY FILL PER-FORMA IN FAULT CONDITION IN WHICH READING PER DTR

PARAMETER IS NOT SHOWN IN METER)

62 9926000062 INSTALLATION OF DTR METER INCLUDING METER BOX, PROVIDING & FIXING OF 1.5SQ MM No.

SINGLE STRAND 10 CORE ARMOURED COPPER CABLE (3.5METER), TERMINATION IN METER &

COIL ETC.(METER, METER BOX, C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

63 9926000063 INSTALLATION OF DTR METER INCLUDING METER BOX, TERMINATION IN METER & COIL ETC. No.

(WITHOUT 10CORE COPPER CABLE) (METER, METER BOX, C.T./P.T. COIL WILL BE PROVIDED BY

Binding of messanger Conductorat with a distance not more than 0.75 mtr with 6 turns

64 9926000064 minimum on XLPE Cable with single strand binding wire (Including cost of Binding wire) No

Supply and Installation of 11/22 kV Distribution Transformers HT Terminal protector (UV

65 9926000086 Resistance) with using 95/120/150 sq.mm long barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y, B) PER SET

Supply & Installation of HT EPR Tap on 11/22 kV Distribution Transformer with replacement of

bare conductor by HT ABC conductor (DO bottom side to transformer) after removal of semi

66 9926000087 conductor by HT ABC (6 inch both side). HT ABC to be supplied by DGVCL. (1Set = 3 Nos i.e. on R, PER SET

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready Capsule, Pipe-In-

67 9926000088 Cage (Pic) Type, Earth Electrodes for HT Feeder Pole Having 2000 mm Electrode Length as per the NO

Tender Specifications and Drawing. (All Materials Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready Capsule, Pipe-In-

68 9926000089 Cage (Pic) Type, Earth Electrodes for HT Feeder Pole Having 3000 mm Electrode Length as per the NO

Tender Specifications And Drawing. (All Materials Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip having hot dip- galvanized-zinc coating of 80-100

microns without any joints or welding. Both the end of the GI strip should be connected with GI

nut bolts and required fabrication work for giving separate earthing connections to

(1) Neutral of the transformer

69 9926000090 (2) MS structures of the transformer center (Approximately 25 meter GI strip per transformer Meter

- as per requirement and instruction of Engineer in- charge) (All Materials will be supplied by

Supply and Installation of uPVC standard make Pipe of 1.25" diameter for covering GI strip with

UV protected Cable Ties of 550 X 7.6 mm size to bind with pole face(Approximately 25 meter

70 9926000092 uPVC pipe for GI strip covering per transformer centre -as per requirement and instruction of Meter

Engineer in-charge.

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out fuse to

71 9926000093 Transformer H.T. including Busbar (12 mm sleev) as per technical specification. (All Materials will Per TC

be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out fuse to

72 9926000100 Transformer H.T. without Busbar(12 mm sleeve) as per technical specification. (All Materials will Per TC

be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out fuse to

73 9902600094 Transformer H.T. including Busbar(15 mm sleeve) as per technical specification. (All Materials Per TC

will be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out fuse to

74 9926000101 Transformer H.T. without Busbar(15 mm sleeve) as per technical specification. (All Materials will Per TC

be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-flammable) material with Weather resistant, Non-

75 9926000095 conductive bird guard OD=300 MM, ID=33 MM, Width =1.25 MM, one side cut from ID to OD. (All NO

Materials will be supplied by Agency)

76 9926000096 Providing and fixing of LT Terminal protectors i.e. Re-useable boot (LT Side 1.1 kV) including LT No

(1.1 kV) insulating taps. All live part at LT side shall be covered with fixing of LT insulating taps.

75 Nylon Net around Transformer Center

75.1 9926000097 Nylon Net (12 * 15 ft) Per Net

75.2 9926000098 Nylon Dori Per TC

75.3 9926000099 Labour charge for fitting Nylon Net (All fabricated material for fitting nylon net shall be provided Per TC

LABOUR RATES FOR MAINTENANCE WORKS FOR THE

FY 2024-25 (WITHOUT GST)

(A) LINE MAINTENANCE

Sr. Rate for FY 2024-25

Item Code Details of works Unit

1 9924000001 Cutting of Tree branches surounding HT/LT line Per Tree

Replacement of old jumpers & providing new double jumpers with 8" binding [D Type] &

capsuling with PVC pipe etc

3 9924000005 Support pole for Stay PSC/STP/RSJ No.

4 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

5 9924000007 Pin binding of conductor 11/22kv Pin insulator per pole in costle area with cleaning . No.

6 9924000008 Pin binding of conductor LT shakel insulator No.

7 9924000009 Replacement of one/both disc.insulator at strain pole No.

8 9924000010 Replacement of LT shackle insulator at cut point No.

9 9924000011 Refixing of V cross Arm No.

10 9924000012 Replacement of V cross Arm (With Transportation & Painting) No.

11 9924000013 Refixing of Top fitting in proper position No.

12 9924000014 Replacement of Top fitting No.

13 9924000015 Replacement of LT cross Arm No.

14 9924000016 Providing DO fuse on DP with carting & jumpuring(ONE DO FUSE) No.

Numburing of pole with paint by preparing back ground of one colour and have

lettering(height 3" * width 0.5") using stensil

16 9924000018 Fixing of MMB(1PH.) at consumer end No.

17 9924000019 Fixing of MMB(3PH.) at consumer end No.

18 9924000020 Replacement of (1ph.) meter for Urban area No.

19 9924000021 Replacement of (1ph.) meter for Rural area No.

20 9924000022 painting consumer no. on MMB (Urban) (with letter size height 40mm* width 8mm) No.

21 9924000023 painting consumer no. on MMB (Rural) (with letter size height 40mm* width 8mm) No.

22 9924000024 Replacement of deteriorated Single phase Service line No.

23 9924000025 Fixing of new dist. Box with complete wiring including clamps,nut bolts etc. No.

24 9924000026 Reparing of guarding involving reshaping of bearer wire cross lacing binding etc. R Mtr.

25 9924000027 Painting of steel fabricated material of RSJ DO DP structure with paint No.

Painting of steel fabricated material of RSJ pole mounted transformer double pole

structure with paint

27 9924000029 Painting of steel fabricated material of RSJ single pole with paint No.

28 9924000030 painting of steel fabricated material of PSC Single pole (HT line) with paint No.

29 9924000031 painting of steel fabricated material of PSC DO DP double pole with paint No.

painting of steel fabricated material of PSC double pole at pole mounted transformer

31 9924000033 Providing line seperater single phase No.

32 9924000034 Providing line seperater three phase No.

33 9924000035 Replacement / Providing of stay insulator along with adjustment of tension in stay wire No.

Replacement of deteriorated /providing LT dist. Box with new up to 100KVA capacity &

crediting it to store.

Replacement of deteriorated /providing LT dist. Box with new above 100KVA capacity &

crediting it to store.

36 9924000038 Adjustment of tension in stay wire No.

37 9924000039 Refitting of LA No.

38 9924000040 Converting pin point to Shackle point including dismentaling & restringing etc. location

39 9924000041 replacement of 11KV Pin insulator with providing new double pin binding No.

replacement of 22KV Pin insulator by new 11kv pin insulator with spares & providing new

double pin binding

41 9924000043 Providing 11kv double disc insulators with binding & restringing No.

42 9924000045 Replacement of existing 11kv conductor (all size) with new double pin binding Cond/K M

43 9924000046 Plumbing of PSC Pole with straightening at pin point No.

44 9924000047 Plumbing of PSC Pole with straightening at tension point No.

45 9924000048 Plumbing of tilted DP structure (PSC/RSJ/STP) with refilling of stone Murrum etc. No.

Providing new 11kv AB /GO switch with fabrication and insulated colour code jumper,

binding, lugs etc

Replacement of old 11kv AB /GO switch with providing new insulated jumper, binding,

48 9924000052 Providing cage type loop guard in verticle LT line with using PVC reel insulators etc per pole

Labour charges for replacement /providing of MMB & service with all accessories for

three phase connection

50 9924000054 Labour charges for replacement /providing of MMB & service with all accessories for No.

single phase connection

Dismentalling of existing Dist.X'mer center(RSJ /STP POLE) 25/63/100/200 KVA with all

fabrication & creditig the old material to store

52 9924000056 Disconnection from LT pole 1 phase No.

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

54 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

56 9924000060 Dismentaling & removing of service line from pole & crediting to S/dn (1 ph.) No.

57 9924000061 Dismentaling & removing of service line from pole & crediting to S/dn (3 ph.) No.

58 9924000062 Reconnection of service line complete with PVC cable (1 Ph) No.

59 9924000063 Reconnection of service line complete with PVC cable (3 Ph) No.

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr in length) with salt and coal

60 9924000064 10kg each, including pvc rigid pipe 20mm dia( 1.5mtr length) to pass exposed part of G.I. No.

wire at consumer end with all materials, earth resistance should be less than 2 ohms

Providing and fixing of signle core 1.5 sq mm single strand copper insulated cable with

cable nail clip for spiral type earthing at consumer end. The end of G.I. no 8 is to be

connected by connector with copper cable of which other end shall be connected to the

61 9924000070 per meter

earth terminal of meter box. This item shall be used in location where there is more

distance between earth terminal and earthing terminal of meter. (All materials Supplied

( C ) ITEMS FOR REPLACEMENT OF BARE CONDUCTOR BY HT/LT AERIAL BUNCH CONDUCTOR

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including fitting of all

accessories i.e. special design suspension / tension clamp, fixing of cross

arm, LT shackle insulator etc. for fixing of messenger wire and inclusive of

dismantling charge of existing bare conductor and crediting in to store &

dismantling of service line from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated piercing connectors through

service connection box complete as required & directed by Engineer in

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM including

fitting of all accessories i.e. special design suspension / tension clamp,

fixing of cross arm, LT shackle insulator etc. for fixing of messenger wire

and inclusive of dismantling charge of existing bare conductor and crediting

in to store & dismantling of service line from LT bare conductor and to

provide service connection on Aerial Bunch Cable by insulated piercing

connectors through service connection box complete as required &

directed by Engineer in Charge.

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including fitting of all

accessories i.e. special design suspension / tension clamp, fixing of cross

3 9924000067 arm, binding to pin insulator, preparing shackle point, jumpers etc. and KM

inclusive of dismantling charge of existing bare conductor and crediting in

to store complete as required & directed by Engineer in Charge.

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including fitting of all

accessories i.e. special design suspension / tension clamp, fixing of cross

4 9924000068 arm, binding to pin insulator, preparing shackle point, jumpers etc. and KM

inclusive of dismantling charge of existing bare conductor and crediting in

to store complete as required & directed by Engineer in Charge

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM including

fitting of all accessories i.e. special design suspension / tension clamp,

fixing of cross arm, LT shackle insulator etc. for fixing of messenger wire

and inclusive of dismantling charge of existing bare conductor and crediting

in to store & dismantling of service line from LT bare conductor and to

provide service connection on Aerial Bunch Cable by insulated piercing

connectors through service connection box complete as required & directed

by Engineer in Charge.

Laying,Testing & commissioning of Specially designed 11 KV AL-59 ACS

6 Medium Voltage Covered conductor as per the technical specifications (with CKM

Laying,Testing & commissioning of Specially designed 11 KV 55 mm2 AAAC

7 Medium Voltage Covered conductor as per the technical specifications (with CKM

LABOUR RATE FOR UNDERGROUND CABLE WORK FOR FY 2024-25 (WITHOUT GST)

Sr. Rate for FY 2024-

No. Item Code Description Unit

Labour charge for excavation of cable trench of 400mm width x 1200mm depth, in any type

1 9925000001 of soil for laying of cable of size up to 240 mm2 (For additional cable 200 mm additional width Meter

shall be considered i.e. half trench length is to be considered)

Labour charge for excavation of cable trench of 600mm width x 1200mm depth, in any type

2 9925000002 of soil for laying of cable of size up to 240 mm2 (For additional cable 200 mm additional width Meter

shall be considered i.e. half trench length is to be considered)

Labour charge for excavation of cable trench of 400mm width x 1500mm depth, in any type

3 9925000003 of soil for laying of cable of size up to 240 mm2 (For additional cable 200 mm additional width Meter

shall be considered i.e. half trench length is to be considered)

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to 240 mm2 & preparation of

sand layer 100mm thick, in the cable trench & covering the cable with 150 mm dia (Inner),

thickness 25 mm, 1.0 meter long RCC half round muffs and providing and fixing of 4inch width

4 9925000004 yellow colour polyethylene tape with printing "CAUTION ELECTRIC CABLE BELOW" at 0.75 m Meter

depth from ground surface after laying cable in trench. This will provide indication that electric

cable is passing underground so as to protect cable from mechnical injuries, refilling the same, as

per Instruction of Engineer in Charge (EIC).

Labour charge for horizontal drilling using Auger machine without damage to surface road at

max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm thickness

H.D.P.E. pipe confirms to IS 4984- 1987(3rd revision) and BIS certification and laying of 11KV/22KV

5 9925000005 XLPE cable of size up to 240 mm2 in HDPE pipe, as per Site Condition (excluding cost of pipe). The Meter

detail map obtained from HDD machine and excell sheet(hard and soft copy) indicating the

respective depth and distance from adjacent landmark for each segment for HDD is must required

to be submitted. HDD to be carried out at depth 1.5 mtrs to 2.0 mtrs as per site conditions and as

per instruction of EIC.

Labour charge for horizontal drilling manually without damage to surface road at max 2.0 mtrs

depth & putting of 6.11 kg/cm2 , class-4,Green color, 110mm

O.D. , 8.5mm thickness H.D.P.E. pipe confirms to IS 4984-1987(3rd revision) and BIS certification

6 9925000006 and laying of 11KV/22KV XLPE cable of size up to 240 mm2 size, as per Site Condition (excluding Meter

cost of pipe). The detail map and excell sheet(hard and soft copy) indicating the respective depth

and distance from adjacent landmark for each segment of cable to be submitted. Drilling to be

carried out at depth Minimum 1.2 mtrs to 2.0 mtrs as per site conditions as per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5 mm thickness

7 9925000007 H.D.P.E. pipe confirms to IS 4984 and BIS certification for laying of underground 11KV / 22KV XLPE Meter

cable up to 240 mm2 size.

Labour work for RCC concreting on disputed location and repairing of damage portion of

8 9925000008 road crossing for the work carried out for roads crossing as well as concreting & muffing of CMT

ploes including all materials (1:2:4)

Providing & fixing concrete stone route marker of 300 mm width x 150 mm thick x 650 mm

height embedded in earth at least 300 mm below & 350 mm above ground level respectively at

distance approx 50 meters along the length of cable. The RCC concreting (1:2:4)(all necessary

maeterials will be in bidder's scope) of route marker is to be carried out 300 mm width x 150 mm

9 9925000009 thick x 300 mm below ground level as per instruction of EIC. The route marker should be with No.

name of company with approved yellow colour-DGVCL. The distance from marker to cable and

cable depth with feeder name etc., marked with arrow sign is to be painted on it.The route

marker is to be fixed at location near to any fixed permanent location (not necessary to fix exact

on top of cable) as per instruction of EIC.

Erection of D.P. (double pole) structure using 9 / 11 Mtr. RSJ pole with cable connection

10 9925000010 arrangement along with fitting of necessary fabrication for 11KV cable including excavation of pit No.

& refilling of earth as per instruction of EIC. (Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr RSJ pole with cable connection arrangement

11 9925000011 along with fitting ofnecessary fabrication for 11KV/22 KV cable including excavation of pit & No.

refilling of earth as per instruction of EIC. (Exclusive of concreting & muffing of poles)

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC pole with cable connection

12 9925000012 arrangement along with fitting of necessary fabrication for 11KV cable including excavation of pit No.

& refilling of earth as per instruction of EIC. (Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 8.0 Mtr PSC pole with cable connection arrangement

13 9925000013 along with fitting ofnecessary fabrication for 11KV/22 KV cable including excavation of pit & No.

refilling of earth as per instruction of EIC. (Exclusive of concreting & muffing of poles)

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up to 240 mm2 on DP Structure

14 9925000014 with fixing of 02 Nos polymer cleats on top and middle part.Polymer cleats, nut bolts etc. fixing Per Job

material to be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm thickness H.D.P.E.

pipe confirms to IS 4984 and BIS certification on the erected DP structure for the mechanical

15 9925000015 protection of cable by inserting the cable inside HDPE pipe. The HDPE pipe shall be erected in Per Job

such a way that 300mm shall be below the ground level and the rest 2700 mm shall be

supported on the DP Structure with 01 No Polymer cleat.All materials including polymer cleat

and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI pipe with pit to be filled

16 9925000016 with salt & coke and construction of chamber as per DGVCL Drg. No. dg /100 for DP and cable. No.

The earthing pit should be joined with cable by G.I. strip of size 1” width & 2 mm thick. All

material GI pipe, Coke, Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor) for upto 11kV 3C x 185 mm2 size

17 9925000017 XLPE cable as per DGVCL technical specification No.

18 9925000018 Supply & fixing of heat & shrinkable end terminations (outdoor) for upto 22 kV No.

3C x 185 mm2 size XLPE cable as per DGVCL technical specification)

19 9925000019 Supply & fixing of heat shrink type end terminations (indoor) for upto 11kV 3C x 185 mm2 size No.

XLPE cable as per DGVCL technical specification)

20 9925000020 Supply & fixing of heat & shrinkable end terminations (indoor) for upto 22 kV No.

3C x 185 mm2 size XLPE cable as per DGVCL technical specification

21 9925000021 Supply & fixing of heat shrinkable straight through joint for upto 11kV 3C x No.

185 mm2 size XLPE cableas per DGVCL technical specification.

22 9925000022 Supply & fixing of heat shrinkable straight through joint type for upto 22kV 3C x 185 mm2 size No.

XLPE cable as per DGVCL technical specification

Labour charge for excavation of 2100mm long x 1200mm wide x 1200 mm deep joint pits

23 9925000023 for installation of 11kV / 22kV Straight through joints as per instruction of engineer-in-charge & No.

covering the cable with 150 mm dia (Outer), thickness 25 mm, 1.0 meter long RCC half round

muffs & refilling same as per instruction of EIC .

Providing and fixing of insulating bus bar, made from 11KV/22KV XLPE cable after removal of

semi conducting layer and applying of PVC heat shrinkable anti- tracking core insulating tubing

(1.1KV), on both end terminal using Aluminium long barrel heavy duty up to 240 sq mm lugs,

24 9925000024 Aluminium bus connector. Taping with PG- clamp for bus conductor as per drawing and as per No.

instruction of EIC. The Alluminium lugs and PG clamp shall be covered with 11KV/22KV HT

insulating tapes.(11KV/22KV XLPE cable will be in scope of DGVCL while all other materials will be

in bidder's scope)

Testing of cable at various points and commissioning the feeder as per instruction of engineer-in-

25 9925000025 charge.Test result shall be submitted by contractor with bill. No.

Preparation and submission of 6 (six) copies, of complete layout drawings with GIS mapping

26 9925000026 as per actual cable routing showing road crossing, HDPE pipe sleeving, jointing locations, markers Set

Providing and fixing of Sign Board at junction point Made out of 2 mm aluminium sheet

size 750x300 mm (2.5 x 1ft) rectangle, as per design, pre treated with phosphate process

and acid etching coated with one coat of epoxy primer and two coats of best quality

paints, refloctrorised with Hi-Intensity retro – reflective sheeting as per the latest and

27 9925000027 frame fabricated from suitable size iron angle. The Sign Board is to be fixed on the base No.

prepared from channel and bracing angles which is grouted by means of cement

concreting of 1:2:4 for size of 300 mm dia x 800 mm height (500 mm to be grouted in

ground). The details to be displayed on sign board will be given by In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing and fixing of Sign Board (Danger Board) on Distribution Transformer Centers

Made out of 2mm aluminium sheet size 300x300mm (1x1ft) as per design, pre treated

with phosphate process and acid etching coated with one coat of epoxy primer and two

28 9925000028 coats of best quality paints, refloctrorised with Hi-Intensity retro- reflective sheeting as No.

per the latest and frame fabricated from suitable size iron angle. The Sign Board (Danger

Board is to be fixed at the location as per instruction of In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm (W) from 3 mm aluminium

sheet along with 1.0 mm dia aluminium binding wire for fixing of aluminium tag near end

29 9925000029 termination joint at DP structure for identifyng the cable. The details of feeder i.e. 11 / 22 No.

KV with feeder name shound be punched on the tag by letter punch of size 16 mm as per

instruction of In-charge Engineer.

30 9925000030 Supply & fixing of heat shrink type end terminations (outdoor) for 11kV 3C x 240 mm2 size No.

XLPE cable as per DGVCL technical specification

31 9925000031 Supply & fixing of heat & shrinkable end terminations (outdoor) for 22 kV 3C x 240 mm2 size No.

XLPE cable as per DGVCL technical specification)

32 9925000032 Supply & fixing of heat shrink type end terminations (indoor) for 11kV 3C x 240 mm2 size No.

XLPE cable as per DGVCL technical specification)

33 9925000033 Supply & fixing of heat & shrinkable end terminations (indoor) for 22 kV 3C x 240 mm2 size No.

XLPE cable as per DGVCL technical specification

34 9925000034 Supply & fixing of heat shrinkable straight through joint for 11kV 3C x 240 mm2 size XLPE No.

cableas per DGVCL technical specification.

35 9925000035 Supply & fixing of heat shrinkable straight through joint type for 22kV 3C x 240 mm2 size XLPE No.

cable as per DGVCL technical specification

Installation, Testing and commissioning of 11 KV,630 A SCADA Compatible, RRL type- 3 Way

36 9925000038 RMU including Two numbers of earthings as per Drawing (material is in bidder's scope) and as per No.

DGVCL Technical specification.

Installation, Testing and commissioning of 11 KV,630 A SCADA Compatible, RRLL type- 4 Way

37 9925000039 RMU including Two numbers of earthings as per Drawing (material is in bidder's scope) and as per No.

DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A SCADA Compatible, RRL type-3 Way,

38 9925000040 RMU including Two numbers of earthings as per Drawing (material is in bidder's scope) and as No.

per DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A SCADA Compatible, RRLL type-4 Way,

39 9925000041 RMU including Two numbers of earthings as per Drawing (material is in bidder's scope) and as per No.

DGVCL Technical specification.

Construction of plinth for 11KV, RRL type- 3 Way (i.e Two numbers of Isolator & One number of

40 9925000042 Breaker) Ring Main Unit as per DGVCL's technical specification mentioned in drawing no: Drg. No.

11kv-01. All required material will be supplied by contractor.

Construction of plinth for 11KV, RRLL type- 4 Way (i.e Two numbers of Isolator & Two number of

41 9925000043 Breaker)Ring Main Unit as per DGVCL's technical specification mentioned in drawing no:Drg. No.

11kv-02.All required material will be supplied by contractor.

Construction of plinth for 22KV, RRL type- 3 Way (i.e Two numbers of Isolator & One number of

42 9925000044 Breaker) Ring Main Unit as per DGVCL's technical specification mentioned in drawing no: Drg. No.

22kv-01. All required material will be supplied by contractor.

Construction of plinth for 22KV, RRLL type- 4 Way (i.e Two numbers of Isolator & Two number of

43 9925000045 Breaker)Ring Main Unit as per DGVCL's technical specification mentioned in drawing no:Drg. No.

22kv-02.All required material will be supplied by contractor.

Modifications e.g.Providing and fixing of Terminal protectors i.e. Re-use able boot (HT

Side 11/22KV, LT Side 1.1KV) including 11/22 KV insulating taps and L.T.(1.1 KV) insulating

taps ,Busbar, Tapping from Bus Bar (11/22 KV XLPE cable) through P.G. Clamp for H.T.

Jumper to D.O. Fuse to bushings of Transformer Center, providing & Fixing of jumper and

providing & fixing of Heat Shrinkable Anti Tracking Core Insulating Tubing (Insulation Level

H.T. jumper , Clamping arrangement of cable support frame on both side of existing Over

Head type Distribution Transformer to utilize in Under Ground cable network as per

drawing & as per instruction of Engineer incharge. All live parts i.e. PG-Clamp,

connections of D.O.fuses, HT bushings etc . shall be covered with fixinng of 11/22 KV HT

insulating tapes. ( 11/22 KV XLPE cable will be in scope of DGVCL while all other materials

will be in bidder's scope ) .

45 9925000047 Laying of any size of 11/ 22 KV XLPE /PILC Cable in redaymade trench or in open space Per Cable Per

46 9925000060 Labour charges for Lying of O/H XLPE cable pole to pole KM

47 9925000064 Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC half round pipe No.

1.DGVCL will provide key material like M.S. materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated

materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL approved drawing and by welding

rods confirming to the relevent ISI specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrication items shall be provided by DGVCL on

payment of required charge for connection & electricity bill of the same shall be paid by

Note: 4.All the rates are inclusive of PF & Exclusive of GST applicable time to time.

5.All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles &

steel fabricated materials of RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for the RSJ

poles & steel fabricated materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality

silver paint) is to be properly painted on to the RSJ poles & steel fabricated materials of

IN WORDS FORTY EIGHT LAKH FIFTY THOUSAND ONLY GRAND TOTAL

IN WORDS FORTY EIGHT LAKH FIFTY THOUSAND ONLY GRAND TOTAL

Executive Engineer (O&M),

D.G.V.C.L.,Vapi Rural Division.

1. DGVCL will provide key material like M.S.

materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated materials etc. to the

contractor.2.All fabricated items shall be fabricated as per

DGVCL approved drawing and by welding rods confirming

to the relevent ISI specification and as directed by Engineer

in charge.3.Necessary electricity connection for fabrictated

items shall be provided by DGVCL on payment of required

charge for connection & electricity bill of the same shall be

paid by the agency.4.All the rates are inclusive of PF and

Exclusive of GST applicable time to time.5.All steel material

are to be painted as below:(a) Scrubbing of rusted surface

properly before applying the paints on to the RSJ poles &

steel fabricated materials of RSJ/PSC poles is must

required.(b) Two coats of approved ISI mark red oxide

(primer) is to be properly painted for the RSJ poles & steel

fabricated materials of RSJ/PSC poles. (c) Two coats of

approved ISI mark silver paint (i.e. triple mangoes or

equivalent quality silver paint) is to be properly painted on

to the RSJ poles & steel fabricated materials of RSJ/PSC