Providing and erecting Street Light on Pethapur to Randheja Road at Gandhinagar. [2nd attempt]

NAME OF WORK:- Providing and erecting Street Light on Pethapur to Randheja Road at Gandhinagar.(2nd Attempt)

FUND HEAD :- CIVIL JOINT

T.S. NO :- Technical Sanction from S.E.Electrical Circle, Gandhinagar

Wide Letter No:- NO.PB.SACHI.COMP./S.C.-3/ORG TS 124/425/ OF 2026 DT:13-02-2026

ITEM NO. QTY PARTICULARS AMOUNT

SIGNATURE OF THE CONTRACTOR Deputy Executive Engineer Executive Engineer

S.C.Electrical Sub Division No-3 S.C. Electrical Division

Gandhinagar Gandhinagar

NAME OF WORK:- Providing and erecting Street Light on Pethapur to Randheja Road at Gandhinagar.(2nd Attempt)

Quantity Unit Description of Item Rate Rate in words Amount

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all Rupees Fifty Five &

over the run and back filling the same and making the surface as normal ground. Paise Fifty Five only

Making trench in soft soil of suitable width of 30 cm deep for laying cable or locating the fault all Rupees Eighteen &

over the run and back filling the same and making the surface as normal ground. Paise Fifty One only

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying Rupees Seventy Four

3 50 Mtr. any size of cable or locating the fault all over the run and back filling the same and making the 74.74 & Paise Seventy

surface as normal ground. Four only

(B) If additional machinery like hammer driller or JCB use [Add] (354+74=428) Hundred Thirty Two

(As per requirement) & Paise Twenty

Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding power Hundred Ninety Two

supply by making up to following size of holes at both ends complete.(A) Up to 100 mm bore dia & Paise Eighty Eight

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should

be made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of terminal plate of min 6mm Hylam Rupees Fifteen

sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and Thousand Seven

arrangement for cable termination to be erected With Suitable foundation (Included) as per details Hundred Five &

given by manufacturer considering site requirement. (H) 9 Mtr. Long 70 mm Top X 155 mm Paise Fifty only

bottom dia, 3 mm thickness with 260mmX260mmX16mm base plate, 4-M24 Bolts and 750mm

long with necessary G.I. J Bolts .Approx Pole weight 97 kg

Supplying and erecting street light pole bracket comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class GI sleeve tubing of approx. 45cms.length and suitable

for 76.5mm/80mm or require size pole top having sufficient fastners for fixing the brackets and

7 having suitable rise as per site condition as directed and spread of 2 mtr.with suitable welded

stiffener reducer and with lock nut complete painted with one coat of Red oxide / PU base primer

and two coats of Aluminium / PU paint. Suitable for side entry fitting brackets of following nos of

A 94.00 Nos [B] Double Arm Bracket 2 Mtr. 1227.15 Hundred Twenty

B 9.00 Nos [C] Triple Arm Bracket 2 Mtr. 1658.42 Hundred Fifty Eight

& Paise Forty Two

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (iv) 120 watts

( In house NABL lab & 3 years warranty)

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

8 215.00 Nos select any wattage capacity between the ranges shown.) (iv) 120 watts

( In house NABL lab & 3 years warranty)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply Thousand Five

with over-voltage protection. (iv) above 90 to 120 watts Cat III Hundred Sixty Six &

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of

following size of cables, (Make: Finolex,Polycab,RR Kable, Havells, KEI)

Hundred Fifty Three

3090.00 Mtr. (A) 4 core 16 Sq. mm 153.52

9 & Paise Fifty Two

Hundred Ninety &

300.00 Mtr. (B) 4 core 25 Sq. mm 190.89

Paise Eighty Nine

Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked

copper wires of following size to be erected as directed. e) 1.50 Sq.mm 3 core round PVC Rupees Forty Six &

sheathed (Make: Finolex,Polycab,KEI) Paise Forty Six only

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material Rupees Sixty Two &

at required depth for laying of cable. below ground / road surface for enclosing cable and back Paise Sixty Two only

filling the same to make ground as per original.(A)50 mm dia

300.00 Mtr. (B)63mm outer dia 73.73 Three & Paise

Seventy Three only

Smart 4G Timer, Supply of IoT based 4G Smart Streetlight Control & Monitoring System having a

Smart Panel comprising of 3 Phase IoT Streetlight Smart 4G Timer with 16x2 LCD to display

RSSI, relay status, RTC time & diagnostics., Controller works on 3-phase & also on any available

1-Phase., Controller with 8-hour battery backup during external power failure. External power

failure alert immediately to cloud., 110-630 V AC @ 50-60 Hz – 3 phase operating range.,

Standby power consumption <3W., Smart 4G Timer with RS232 port for DLMS Energy meter.,

Smart 4G Timer must be compatible with any make / brand of DLMS (RS232) Energy Meter., DI:

4 Nos. (3 Contactor / Latch detection, 1 for Door Sensor.)., DO: 3 Relays for Independent control Rupees One Lac

each phase (R, Y, B) with 1 extra spare relay., Smart 4G Timer with dual SIM functionality for Four Hundred

3.00 Nos connectivity backup., 4G M2M SIM 3-Year communication included., Local configuration via 100427.33 Twenty Seven &

WiFi / BLE for maintenance or during force majeure., GPS chip inbuilt of Smart 4G Timer for Paise Thirty Three

auto location tracking & astronomic schedule location., 50 programmable schedules., only

Astronomic scheduling with monthly offsets., Smart 4G Timer has inbuilt timer stores schedules

locally & also stores schedule execution logs locally, syncs to cloud whenever connected to cloud.,

Auto-scheduler overrides manual operations., Monitoring & alerts for MCB trips., Over/under

voltage, current, overload, power factor & short circuit protections with alerts via Dashboard, App,

SMS, WhatsApp & Email., Contactor / Latch chattering protection & alerts., Smart 4G Timer with

neutral failure protection and alert., Bulit-in Watchdog for anti-jamming., Smart 4G Timer must

send Regular "heartbeat" on software for CCMS status.,

Accelerometer for tamper & panel movement detection & alerts., Smart 4G Timer must be tested

from an NABL Lab for Surge Test @ 6 KV (IEC 61000-4-5), ESD Test @ 4 KV (IEC 61000-4-2),

EFT @ 2 KV (IEC 61000-4-4), Conducted Emission @ 150 KHz-30 MHz (CISPR11), Damp Heat

Test (40 Deg C @ 95% RH) 2 cycles of 12+12 hours (IS: 9000 (Part 5/Sec.2):1981 latest) with all

test passing criteria as “Temporary degradation or loss of function or performance which is self-

12 recoverable”., FOTA functionality required for upgrades., Smart 4G Timer sends & stores

online/offline data of controller & load for lamp burn hours analysis.,

It stores & syncs connectivity logs for configuration of network connections & analytics., PANEL &

SWITCHGEAR, The panel includes a Class 1 DLMS energy meter NABL approved with 1-2 months of

stored data of daily, hourly, monthly, load survey, instantaneous, events, tamper data & with power events

stored in meter memory for audit purpose., Must monitor V, I, KWH, KVA, PF, KVAH, etc., Panel made

with 2 mm CRCA sheet with ground mountable stand complete with gland plate, waterproof glands,

earthing bolt., IP55, weatherproof panel with RAL7035 powder-coated., Smart 4G Timer must be fitted on

removable terminal sockets for easy maintenance., Switchgear includes 3 Nos. 3 pole Contactor / Latch

having minimum 50 A Load carrying capacity per phase, all other switchgear & wires: 40 A load carrying

capacity., 1 Nos. 4P MCB 10 kA for Incomer & 6 Nos. 1P MCBs 10 kA for Outgoing., Phase-Wise Bypass

MCBs required., 4P RCCB 100 mA., door sensor. Also, provide lock & key facility., Panel mount outdoor

antenna for GSM, GPS., Canopy design for draining down water., CCMS SMART SOFTWARE, OAuth

2.0 APIs for sending data to Government clouds/software, etc., CCMS Web dashboard with secure

password & OTP login., Hosted on trusted cloud, data security, antivirus & attack protection., HTTPS.,

AES256-bit encryption., Vulnerability Assessment and Penetration Testing (VAPT) certificate for CCMS

Software., Streetlight management software for load status, live analytics & reports., Energy meter data

tables (kW, kWh, PF, I, V, etc.) available., Utility monthly bill reconciliation & Class 1 accuracy reports for

billing, energy monitoring & auditing for streetlight load., Fault detection., Light fault 99% analysis on

dashboard using energy monitoring., WhatsApp integration., Hierarchy-wise reporting & alerts., GIS

capacity., 1 Nos. 4P MCB 10 kA for Incomer & 6 Nos. 1P MCBs 10 kA for Outgoing., Phase-Wise Bypass

MCBs required., 4P RCCB 100 mA., door sensor. Also, provide lock & key facility., Panel mount outdoor

antenna for GSM, GPS., Canopy design for draining down water., CCMS SMART SOFTWARE, OAuth

2.0 APIs for sending data to Government clouds/software, etc., CCMS Web dashboard with secure

password & OTP login., Hosted on trusted cloud, data security, antivirus & attack protection., HTTPS.,

AES256-bit encryption., Vulnerability Assessment and Penetration Testing (VAPT) certificate for CCMS

Software., Streetlight management software for load status, live analytics & reports., Energy meter data

tables (kW, kWh, PF, I, V, etc.) available., Utility monthly bill reconciliation & Class 1 accuracy reports for

billing, energy monitoring & auditing for streetlight load., Fault detection., Light fault 99% analysis on

dashboard using energy monitoring., WhatsApp integration., Hierarchy-wise reporting & alerts., GIS

mapping of live connected streetlight control panels, poles & streetlights., MQTT protocol., Smartphone app

with local configuration & navigation., Monitoring & reporting of lighting parameters., Facility for media

attachments for site photos/videos/work permits/checklists, etc. per Feeder Panel for remote verification.,

Asset management module for streetlight infrastructure data., Complaint/service task management with

history & escalation must be available., Android & iOS App for dashboard analytics, graphs, energy data,

alerts., 3 Years CCMS Web Software & Cloud Server Hosting subscription included., Customizable, user-

friendly dashboard.,

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

Rupees Fifty One &

13 6.00 armoured cable complete with out going tails, insulating tape etc for following size of cables. (E) 2 51.51

Paise Fifty One only

to 4 core 25 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size

Rupees Fifteen &

14 848.00 Nos evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium 15.15

Paise Fifteen only

plated nut bolts in an approved manner. (C) 16/25 Sq.mm.

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays, power switchgears, motor

starters & control wiring) with required size of copper lugs, nuts and bolts if required.

Hundred Forty Two

48.51 Mtr. (g) One wire 16.00 sq. mm 142.41

& Paise Forty One

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron

Hundred Sixty Eight

16 103.00 Nos pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 368.65

SWG earth wire.

& Paise Sixty Five

Hundred Seventy

17 103.00 Nos For using salt and charcoal / coke as required for pipe type earthing. 171.70

One & Paise Seventy

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover. (A)(approved make OEM has

to submit test certificate including value of earth resistance of installation duly stamped and signed

18 3.00 Nos 4591.46 Hundred Ninety One

by agency and officer Incharge has to ensure the value of earthing resistane mentioned in test

& Paise Forty Six

Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable

to retain moisture for long time Necessary test report must be submitted by Agency.

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Rupees Twenty Six

Providing & erecting Medium Voltage Danger Notice Board sticker as per language suggested by

19 106.00 Nos 26.26 & Paise Twenty Six

engineer incharge of standard size as per IS-2551

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having Rupees Two

20 215.00 Nos breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark 270.68 Hundred Seventy &

cat III ( Make : L&T, Siemens, Legrand) Paise Sixty Eight only

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 Rupees One

21 36.00 Nos V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 112.11 Hundred Twelve &

8828/1996 with ISI Mark Cat.III ( Make : L&T, Siemens, Legrand) Paise Eleven only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking Rupees Six

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed Thousand One

22 3.00 thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, 6173.12 Hundred Seventy

spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU Three & Paise

only Cat III ( Make : L&T, Siemens, Legrand) Twelve only

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase and

neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do

23 6.00 Nos 4314.72 Hundred Fourteen &

not incorporate any electronic component for following Max. rating erected as directed.(iv)

Paise Seventy Two

Amps. FP (100 mA Sensitivity) Cat. III

( Make : L&T, Siemens, Legrand)

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S.

Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to be buried in

ground to have appropriate erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc. hinged double door internally supported on

both side, with internal and outside looking arrangement with look and keys in duplicate 35 x 35 x

5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with three tank powder coated paint. section

pillar roof should be without joint with water leakage proof & tested as per IP 55 test & followed

by IS 2147 of 1962 (A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with

angle iron legs 95 cm long made from 40 X 40 X 6 mm thick MS angle

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron legs

3.00 Nos 16691.26 Hundred Ninety One

cm long made from 40 X 40 X 6 mm thick MS angle

& Paise Twenty Six

25 3.00 sqmtr Supplying and erecting bakelite sheet 12mm thick HYLAM make on existing angle iron frame. 2311.89 Hundred Eleven &

Paise Eighty Nine

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with

four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to

each busbar,erected in existing cubical panel with necessary connections.(A) Suitable for

26 Amp. Capacity (B) Suitable for 200 Amp. Capacity

Rupees Six Hundred

7.20 (A) Suitable for 100 Amp. Capacity 660.54 Sixty & Paise Fifty

Supplying KITKAT pattern porcelain cut-out fuse with base of following current capacity erected

on existing block board.

Hundred Seventy

Seventy Six only

28 30.00 Kg. Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 77.77 Seven & Paise

Seventy Seven only

Rupees Forty Seven Lac Sixteen Thousand Two Hundred Fifty Six & Paise Twenty Five only

Signature of Contractor Dy.Ex.Engineer Executive Engineer

Sach.Comp.Elect.Sub.3 Sach. Comp.Elect.Division,

Gandhinagar. Gandhinagar

NAME OF WORK:- Providing and erecting Street Light on Pethapur to Randheja Road at Gandhinagar.(2nd Attempt)

I / WE am / are willing to carry out the work ………………………………% above / below percent (Should be written in figures and words) of the

Estimated Amount Put to Rs.______________________ Estimated Amount Put to Rs.______________________

In Words :- In Words :-

Please Strike out whichever is not applicable.

Note 1 : All works shall be carried out as per Public works Department Handbook and other specifications of Divison or as directed

Note 2 : All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor

under his signature.

Note 3 : Rates quoted include clearance of site [prior commencement of work and at close] in all respects and hold good for work under all

conditions, site, moisture, weather etc.

Note 4 : To be continued on additional sheets, if found necessary.

Note 5 Dismantle material will be handed over to Agency and Amount will be deducted from Bill.

SIGNATURE OF THE CONTRACTOR Deputy Executive Engineer

S.C.Electrical Sub Division No-3

Executive Engineer

Sach. Comp.Elect.Division,