Renovation of various Buildings and other works in ANU Campus with Financial Assistance of RUSA (1.0) funds

Removing of left out brick masonary and concrete materials on the roof for leveling the surface and removal debris from the site including cost of all materials, labour charges etc., complete for finished item of work.

If the surface is sound & hard Condition ) The surface must be cleanand sound duly removing of exisiting tretaments clean from dirt, dust and other contaminations by power grinding wire brushing , air blower & jetwater cleaing. BMT- H.68.A

Supplying and applying of crack filling including cost and conveyance of all materials EP10 Injuction Epoxy and PV 50 selaent labour charges etc. complete for finished item of work

Supplying and applying of Fresh bond Ultre Flex Chemical in 2 coats in duration of 24 hours after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work.

Laying of Gio Textile cloth 100 GSM including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work.

Providing water proof coating for the exisiting roofs with high build fiber reinforced acrylic water proof liquid with two coats including necessary materials, cost conveyance of all materilas, taxes, labour charges etc complete

Damp proof course 40mm thick with cement concrete (1:2:4 Nominal mix), using 12mm hard broken stone aggregate including cost of all materials, seigniorage charges, excluding conveyance charges of materials, including the cost of machinery, labour charges, mixing, placing in position, leveling, vibrating, curing etc. complete for finished item of work. (Using concrete mixer)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Supplying, fitting and placing HYSD bar reinforcement in foundation complete including wastage, as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars 36 mm dia and above, where welding required to be done compulsorily. i/c.cost, conveyance of all meterials,taxes, labour charges etc., complete.

Painting to old walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for external walls

Painting to old walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Auguring and boring 300 mm dia of Bores in site for Bored cast-in-situ R.C.C. piles for building foundations in loamy, clayey soils like Black cotton soils and without under reams as per IS 2911 - 1980 as per approved design including all operations, incidental, Labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles.

Under - reaming for 300 mm dia - DOUBLE UNDER REMAING Bored cast-in-situ R.C.C. piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved design including all operations, incidental, Labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles.

RCC m-20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size grades machine crushed hard granite metel (coarse aggregate) from approved quarry including cost and conveyance of ail materials like cement, fine, aggregate (sand) coarse aggregate, water, etc., to site and including seignorage chargs, sales & other taxes on ail materials including ail operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work foundations.

RCC m-20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size grades machine crushed hard granite metel (coarse aggregate) from approved quarry including cost and conveyance of ail materials like cement, fine, aggregate (sand) coarse aggregate, water, etc., to site and including seignorage chargs, sales & other taxes on ail materials including ail operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. (PLINTH (Below Plinth) BLD-CSTN-2-13

RCC m-20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size grades machine crushed hard granite metel (coarse aggregate) from approved quarry including cost and conveyance of ail materials like cement, fine, aggregate (sand) coarse aggregate, water, etc., to site and including seignorage chargs, sales & other taxes on ail materials including ail operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work Colomns, connected beam

Brick Masonry in CM (1:8) prop with Flyash Cement solid blocks of size 290 X 225 X 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs and stone dust including cost and conveyance of all materials, labour charges, seigniorage charges, scaffolding and curing etc. complete with a compresive streangth not lessthan 50 kg/sqm for walls for Superstructure BLD-CSTN-6-18

Plastering with CM in 2 coats, 12mm thick, base coat in CM (1:5), 8mm thick and top coat in CM(1:3), 4mm thick with sponze finish including cost and conveyance of all materials such as cement, sand, seigniorage charges, all operational, incidental and labour charges such as mixing mortar, application, curing, etc. complete for finished item of work .As per AP Revised Std Data Index Code, BLD-CSTN-6.10

Painting to 2 coats with plastic emulsion of first quality of approved brand and color over a primary coat (Three coats in total), including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as directed by the Engineer -in-charge.

Supply and Spreading of Dust from approved quarry includingcost and conveyance ail materials to work site and spreading in uniform layers including taxes, seigniorage, Labour charges etc., complete for finished item of work as per Morth specification 401 (4th Revision) and as directed by the Engineer-In-Charge.

Earth work excavtion for foundations and deposting on bank for ail lifts and with an initiallead of 10m including ail operational, incidental, labour charges such as shoring, sheeting, strtting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc. as per SS - 20 B (APSS 308) in ordinary soils up to 3m depth by manual means.

Flooring with Non-skid red or white full body Ceramic floor tiles with epoxy emulsion grout/ synthetic/ resin based adhesive in specified thick and pointing with specified colour epoxy grout of Size 300 mm x 300 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Flooring with vitrified tiles of 1st quality, set over base coa tof cement mortar (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @3.3.kgs pe rsqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. BLD-CSTN-7-5

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi- chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Varnishing to Wood Work, Two Coats all materials, including cost and conveyance of all materials to work site and all operational, incidental, Labour charges etc. complete for finished item of work. BLD-CSTN-10.9

Dismantling & Demolishing and disposal of unserviceable materials with in 100 metres lead away from the site including cost conveyance of ail materials, taxes, labour charges etc., complete. BLD-CSTN-12-1

Removeing of existing damaged old iron windows including cost conveyance all labour charges etc.,completed.

Painting with Synthetic Enamel paints-Two Coats - For Old Iron Work including cost and conveyance of all operational, incidental charges, labour charges, etc. complete for finfished item of work as directed by the Engineer-in-charge.BLD-CSTN-10-12 (vi)

Supplying and fixing White Glazed Europen Water Closet of confirming to IS:2556-Part-2-1973 of Hindware/ arryware or Nycer make with "P" or "S" trap with Indian make plastic seat and lid for WC with rubber or plastic buffers as per IS 2548-1996 complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges etc., complete for finished item of work.

Supply & fixing orissa pan white glazed W.C.1st quality ISI marked conforming to IS:2556 part-1981 with "p" or "S" trap 630MM X 450 MM including cost and conveyance of ail materials to site, cost of CC bed labour charges and seigniorage charges etc., complete for finished of work.

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture. including cost and conveyance of all operational, incidental charges, labour charges, etc. complete for finfished item of work as directed by the Engineer-in-charge.

Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1/2" (12.7 mm ) thick including cost and conveyance of all operational, incidental charges, labour charges, etc. complete for finfished item of work as directed by the Engineer-in-charge.

Removal of Thermocole false ceiling including cost of ail labour charges and incidental chargesetc., complete.

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification.

Suppling and fixing of oranamental boarders including cost conveyance, labour charges etc. complete for finished item of work.

Providing and applying syntetic plaster putty or equilant putty such as Birla wall care putty or Texture paint or equivalent such as NCL/Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thorougly brushing the surface to Remove ail dirt and remeins of loose powdered materials applying putty /texture paint 5 filleer by putty knife/muslin pad, air dry for 2-3 hours sand papers of 180 to 320 nos, emergy paper for the surface preparation including cost and conveyance of ail materials to site, and ail operational, incidental and labour charges etc.,complete for finished item of work.