SPECIAL REPAIR TO LT OH LINE OF 160 KVA TRANSFORMER AT OFFICERS MESS INTO LT AB CABLE AND CERTAIN OTHER SANCTIONED WORKS AT MIL STN DHARCHULA UNDER GE PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Excavating in trenches by mechanical means , n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil.

M & L Returning filling in, including spreading leveling, watering and well ramming in layer n. exc 25 cm in hard/dense soil.

M & L Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-Charge

M&L for PCC 1:5:10 type D2 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-Charge

M&L for rendering 15mm thick cement plaster on external surface of wall in CM 1:4 all as specified and directed.

M&L rendering 12mm thick cement plaster on internal surface of wall in CM (I:6).

Damp proof course to horizontal incl all form works with 25 mm thick PCC 1:2:4 type B-0 ,mixed with water proofing compound,smooth finish surface

M & L cement concrete 1:2:4 type B1 (20mm aggregate) in coping

Supply only Integral waterproofing compound.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as spfd

M&L Brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick walls built in CM (1:4) all as spfd.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L 25 mm thick cement concrete type B-0(1:2:4) using 12.5 mm graded stone aggregate as in levelling coarse of floor complete.

M&L hard core of gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cms thick, watered and rolled/rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 450X 300(7-8mm) thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 on fair face of brick work or concrete surfaces as backing for tiles all as specified and directed.

M&L Non - skid Ceramic tiles 7-8mm mm thick(square) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm( size 400X 400 mm ), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed beed in CM 1:6 complete all as specified and directed.

M/L for providing precast chequered cement concrete tiles of size 20 cm x20cmx25mm thick set & jointed in neat cement slurry over 15 mm thick screed bed in cm(1:6) with grey cement and pigment complete all as specified and directed.

M&L for three coats of whitewash on plastered surfaces including preparation of new plastered surfaces complete all as specified and as directed.

M&L for two coats of cement based paint over a coat of cement primer including preparation of newly plastered surfaces complete all as specified and directed.

M&L applying two coats of synthetic enamel painting on new steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces.

S&F Pre-painted galvalume aluminium zinc coating GI based corrougted steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverigs/cladding to wall ,fixed with self tapping screws all as specified and directed.

S&F roof trusses (framed) ,trussed,purlins ,crane gantries,rails and fasstenings and heavy brackets framing (Beam,tee,angle channel or flat sections ) including distance pieces,cleats etc all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed.

S&F gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia all as spd and directed.

S&F PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes all as specified and directed.

S&F PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed.

S&F vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor all as specified and directed.

S&F vitreous china wash hand basin, (white), flat back, size 500 x 400mm, including brackets cutting for and pinning in ends of brackets or erecting stand, with and including 32mm bore waste fittings, brass chromium plated with long screwed shanks and fly nuts flange end bedded in red lead incl waste pipe up to NT.

S&F 15mm bore CP cast copper alloy stop valves/angel valve fancy type screwed down, high pressure with crutch or butterfly handle screwed both for iron pipe or union and fixed.

S&F 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule all as specified and directed.

S&F 15mm bore pillar taps cast copper alloy chromium plated fancy type screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed.

S&F 32mm dia waste pipe as per required size PVC type.

S&F vitreous china half stall urinal white including connection to flushing pipes and out going pipes & brackets etc.

S&F Vitreous China bowl urinal flat back, sizeof 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe).

S&F Aluminium anodised tubular towel rail 20mm dia, D type, 60cm long between flange complete all as spfd and directed.

Supply and fix brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and directed.

S&F 15 mm concealed type valves, fancy type, CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spfd & directed.

S&F 75mm bore PVC(SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete as all spfd and directed.

S&F 110 mm bore PVC(SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete as all spfd and directed.

S&F 75 mm bore PVC(SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC(SWR) bends any radius complete all as specified and directed.

S&F 100 mm dia PTMT min wt 25g . grating for bathroom and kitchen etc complete all as spfd and as directed.

S&F 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length.

S&F 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length.

S&F PVC connections 15mm size with brass chek nuts of length 450mm complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colur PVC sheet reinforced with ms squre tube ,supplying &fixing in opening as complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tube for top & bottom rail. MS frame shall be covered with heat moulded PVC”C” channel having a PVC steel strip of 20mm width stuck inside with solvent cement for style and plain coloured PVC sheet for top rail lock rail &bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain coloured PVC sheet to be fitted in MS frame welded / sealed to style & rails with suitable PVC sheet beading. And jointed together with solvent cement, supplying and fixing in the frames at site as per specification & drawing.

S&F Aluminium handle cast type anodized 150mm size complete all as specified and directed.

S&F Aluminium, anodized, barrel tower bolts of extruded section 200mm long complete all as specified and directed.

S&F Butt Hinge extruded aluminum alloy with galvanized MS Hinge Pin anodised and fixed 100mm long complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

S &F 3mm thick sheet glass, glazing with oil putty in squares n.exc 0.5 Sqm in each pane all as specified and directed.

Demolition of cement concrete in ground floor,paving nexc 15mm thick(below or above GL) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F Non - skid coloured ceramic tiles of 7 to 8mm thick (square/rectagular) area of each tile exceeding 0.18 sqmbut n.exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cemert to match over and including 15mm thick screed bed in CM (1:6)all as specified and as directed.

S&F glazed ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry including 10 mm thick cement plaster on wall as in backing coat in CM (1:4) and pointed in coloured cement to match the surface.

Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed.

M&L rendering 15 mm thick on other than fair face of brick work in CM 1:4 and surface finished even and fair complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

S&F powder coated aluminium frame for doors, widnows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and directed

S&F powder coated aluminium door shutters, aluminuim section weighting 0.55 kg/m including necessary jointing cleat, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beeding, screws etc complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar aluminium section weighing 0.55 Kg/m including necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc complete all as specified and directed

S&F sheet glass 5.5 mm thick ordinary and galzing with oil putty in square n.exc m in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S & F in repairs Galvinised mild steel wire cloth, 0.56 mm nominal dia of wire and avg width of aperture 1.18mm and fixed with tinned tacks or galvinised wire staples complete all as specified and directed.

S&F 100 mm mild steel but hinges medium weight,cold rolled complete all as specified and directed

Dismantling plain or corrugated steel sheeting ,any gauge,thickness,including Nainital or similar pattern roof coverings and wall cladding complete all as specified.

Dismantling wall and ceiling boards (fibre,pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets.

Dismantling timber scantling 40sq.cm and over in section in any position in framed work all as specified.

Dismantling timber in fillets,rails posts ,rafters,purlins etc under 40 Sq.cm in section all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverigs/cladding towall ,fixed with self tapping screws all as specified and directed.

M&L for II nd class hard wood plain fillets square or rectangular in section clean sawn secured with nails sectional area exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed

M&L II nd class hard wood plain fillets square or rectangular in section cleansawn but bullnosed chamfared or rounded on one edge or face sectional area exc 6 sqcm and nexc 13 sqcm secured in nails complete all as specified and directed

M&L for 6mm thick Plywood, grade BWR, type BB, fixed in wall & ceiling cladding with screws to timber frame work complete all as sfd and directed.

M&L for 2 coats of synthetic enamel paint over one coat of pink primer on newly prepared wooden surface of any description ,not otherwise description over 10cm width or girth.

M&L for one coat of synthetic enamel paint over old steel surface including preparation of surfaces complete all as specified and directed.

M&L Preparing old plastered wall surfaces including complete removal of existing treatment and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall.

M&L two coats of white wash on wall surfaces including prepration of old plastered surfaces complete all as specified and directed

Supply, laying, testing and commissioning LT overhead lines on existing 09 mtr LT steel tubular poles with XLPE insulated aerial bunched cable (ABC) 3-core x 120 sqmm multistranded aluminium conductor (insulated phase conductors) + 1-core x 70 sqmm multistranded aluminium alloy conductor (bare neutral messanger conductor) conforming to as per IS:14255 marked complete all as specified and directed.

Supply, laying, testing and commissioning LT overhead lines on existing 09 mtr LT steel tubular poles with XLPE insulated AB cable 3-core x 70 sqmm multistranded aluminium conductor (insulated phase conductors) + 1 x 50 sqmm multistranded aluminium alloy conductor (bare neutral messanger conductor) conforming to as per IS:14255 marked complete all as specified and directed.

Supply, laying, testing and commissioning LT overhead lines on existing 09 mtr LT steel tubular poles with XLPE insulated AB cable 3-core x 50 sqmm multistranded aluminium conductor (insulated phase conductors) + 1 x 35 sqmm multistranded aluminium alloy conductor (bare neutral messanger conductor) conforming to as per IS:14255 marked complete all as specified and directed.

Supply, laying, testing and commissioning LT overhead lines on existing 09 mtr LT steel tubular poles with XLPE insulated AB cable 3-core x 35 sqmm (insulated phase conductors) + 1 x 25 sqmm (bare neutral messanger conductor) + 1 x 16 sqmm (for street light conductor) ISI marked complete all as specified and directed.

Supply, laying, testing and commissioning LT overhead lines on existing 09 mtr LT steel tubular poles with XLPE insulated AB cable 1-core x 16 sqmm (insulated phase conductors) + 1 x 16 sqmm (bare neutral messanger conductor) conforming to as per IS:14255 marked complete all as specified and directed.

Supply and fix pre insulated jointing sleeve for AB cable of size 120 sqmm (phase conductor) complete all as specified and directed.

Supply and fix pre insulated jointing sleeve for AB cable of size 70 sqmm (phase conductor) complete all as specified and directed.

Supply and fix pre insulated jointing sleeve for AB cable of size 50 sqmm (phase conductor) complete all as specified and directed.

Supply and fix pre insulated jointing sleeve for AB cable of size 35 sqmm (insulated neutral messanger conductor) complete all as specified and directed.

Supply and fix pre insulated jointing sleeve for AB cable of size 16 sqmm (street light conductor) complete all as specified and directed.

Supply and fix insulation piercing connectors (IPC) for main/service/street light connections for cable of 16-95 sqmm with taps ranging from 4-50 sqmm IPC type 002 complete all as specified and directed.

Supply and fix insulation piercing connectors (IPC) for main/service/street light connections for cable of 50-150 sqmm with taps ranging from 6-50 sqmm IPC type 004 complete all as specified and directed.

Supply and fix cable end cap for cable of 120 sqmm three core + 70 sqmm one core complete all as specified and directed.

Supply and fix cable end cap for cable of 70 sqmm three core + 50 sqmm one core complete all as specified and directed.

Supply and fix cable end cap for cable of 50 sqmm three core + 35 sqmm one core complete all as specified and directed.

Supply and fix cable end cap for cable of 35 sqmm three core + 25 sqmm one core + 16 sqmm one core complete all as specified and directed.

Supply and fix cable end cap for cable of 16 sqmm two core complete all as specified and directed.

Supply and fix suspension clamp with Aluminium. alloy bracket, stainless steel strap, buckles, eye hook incl nuts bolts and washers complete all as specified and directed.

Supply and fix anchoring clamp suitable for cable size 16-50 sqmm with Aluminium. alloy bracket, stainless steel strap, buckles, eye hook incl nuts bolts and washers complete all as specified and directed.

Supply and fix anchoring clamp suitable for cable size 50-70 sqmm with Aluminium. alloy bracket, stainless steel strap, buckles, eye hook incl nuts bolts and washers complete all as specified and directed.

Supply and fix single phase Distribution box with spring loaded busbar connection for 4 Nos outgoing cable connections including Al. alloy bracket, stainless steel strap, buckles, eye hook incl nuts bolts and washers complete all as specified and directed.

Supply and fix three phase Distribution box with spring loaded busbar connection for 2 Nos outgoing cable connections including Al. alloy bracket, stainless steel strap, buckles, eye hook incl nuts bolts and washers complete all as specified and directed.

Supply and fix three phase Distribution box with spring loaded busbar connection for 3 Nos outgoing cable connections including Al. alloy bracket, stainless steel strap, buckles, eye hook incl nuts bolts and washers complete all as specified and directed.

Supply & fixing stay assembly complete with Aluminiuml accessories, such as stay plate 300x300x6mm, stay rod 215cm long and 20 mm dia with nuts including GI bow turn buckle etc., all as per Electrical plate No 1 or SSR -2009 Part I complete all as specified and as directed. Note. Loop type insulator, stay clamps, excavation, PCC will be paid seperately under relevant items of Sch A

M&L for loop type insulators vitreous porcelain white, brown or green large size with overall dimensions 65x90 mm clearance of hole 25.5 mm complete all as specified and directed.

Supplying, laying & jointing GI water tubing, 50 mm bore, light grade as in sleeving etc laid in trenches / pole post /under culvert/ under road incl nut,bolts and clamps for fixing to pole etc. complete all as specified and directed .

M&l PCC 1:3:6 type C-1 (Using 20mm graded stone aggregate) as in plinth block of pole and stay including necessary form work complete all as specified and directed.

M & L for Sand cushioningng (dry sand) to under ground cable for cable protection provided with layers 8cm thick before laying and 15cm thick after laying the cable and punned down to 23 cm thickness complete all as specified and directed. Note : For payment purpose punned thickness of 18cm shall be measured against spread thickness of 18cm as mentioned in para19.75 of SSR Part-I

Supply and laying sub class B bricks old size for protection of cables laid lengthwise perpendicular to the axis of cable, adjecent to each other complete all as specified and directed.

M&L steel work in FE-410-S grade for cross arms, bracing, supported, clamps & back plates fabricted from structural steel section including nuts, bolts, washers, welding. Bending cold and hot Drilling hole for bolts, in any size as dincted or directed and inclusive of one primer coat of red oxide primer one under coat and one finishing coat of paint aluminum grey complete as specified and directed including dismantling old work.

Supply and fix in replacement digital type time switches 250 V single phase including steel metal enclosure conforming to IS/IEC 60947-4-1 working on 24 hrs time schedule complete all as specified and directed. Make : Model IHXSS01060 of Havells or equivalent

M&L in replacement for galvanized steel wire 4mm dia continous earth wire along AB cable incuding binding wire of suitable size complete all as specified and directed.

M&L in replacement for earthing complete with GI wire 4 mm dia with galvanized cast iron earth plate electrode of size 600x600x6.00mm buried in ground vertically to a depth not less than 2.25 mtrs below ground level, earth plate shall be packed on all side with charcoal mixed with salt to thickness of 150 mm connected to GI earth wire, 4 mm dia (8 SWG) protected by GI pipe 15 mm bore light grade and watering pipe 20 mm dia light grade 1.5 mtr long including necessary earth work and disposal of surplus soil to a distance not less than 50 m, chamber of PCC (1:4:8) type D2 using 40 mm graded stone aggregate coping shall be of PCC (1:3:6) type C1 using 20 mm graded stone aggregate with 50 mm thick precast RCC cover (1:2:4) type B1 (using 20 mm graded stone aggregate) reinforced with 8mm dia TMT bars @ 80mm c/c both ways and angle iron frame including frame funnel, wire mesh GI earth wire, 8 SWG under the earth and on the pole up to a height of 1.5 m shall be protected by 15 mm dia GI pipe (light grade) GI pipe to be fixed with pole by means of 2 Nos iron clamps 25 x 3 mm size complete with nuts, bolts and washers etc all as specified and shown in electrical plate No. 3. Note : If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Supply, laying, testing and commissioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with solid/stranded aluminium conductor of size 2 core 16 sqmm including taking out old u/s cable.

Supply, laying, testing and commissioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3½ core 35 sqmm.

Supply, laying, testing and commissioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3½ core 50 sqmm including taking out old u/s cable.

Supply, laying, testing and commissioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3½ core 70 sqmm.

Supply, laying, testing and commissioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3½ core 120 sqmm.

M&L GI tubing light grade 80mm dia with Aluminiuml fitting laid in tranches across the road or fixed to pole with two Nos MS clamp 25 x 3mm flat iron incl nut bolts and washers complete all as specified and directed.

M&L GI tubing light grade 40mm dia with Aluminiuml fitting laid in tranches across the road or fixed to pole with two Nos MS clamp 25 x 3mm flat iron incl nut bolts and washers complete all as specified and directed.

Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m complete all as directed.

Dismantling insulators any type, any size

Dismantling earth wire or copper conductor, service feeder or distributor span complete

Dismantling of ACSR or AAC conductors

Dismantling stay assembly complete.

Supply and fix exhaust fan made of sturdy Engineered plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of 300mm sweep and making necessary connection to ceiling rose complete all as specified.

S&F lamp holder PVC /poly carbonated type with back plate suitable for pendants /angular /batten fittings complete all as specified and directed

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20 mm dia, fixed on wall (concealed conduit wiring) and open conduit wiring on ceiling with GI saddles, GI screws, rowel plugs with all fittings including tee, junction boxes and provision of mild steel body terminal box of suitable size with 3mm thick plastic laminated hard gloosy surface sheet cover for mounting switch sockets etc fixed flushed to wall and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) connected to earth dolly complete for one light/fan point control by one switch complete all as specified and as directed.

S&F of switch piano flush type 5 amps single pole one way complete all as specified and directed.

S&F of ceiling rose surface type 65 mm x 50 mm, 2 to 3 terminal complete all as specified and as directed.

S&F in replacement LED tube light 4' long along with all fixtures and fittings, internally pre wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size, 20W complete all as specified and directed.

S&F sheet metal enclosure for DB SPN 2 way without busbar 240 Volts, single door suitable for housing MCBs and isolators complete all as specified and directed.

S&F MCB SPN 40 Amps, 240 volts 10KA complete all as specified and directed.

S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE and making necessary connection with flexibe wire of suitable size to ceiling rose complete all as specified.

S&F fan hook, made of Fe-290 Gde E-165 iron round bar 10mm in size for hanging ceiling fan as per site requirement complete all as specified.

S&F Wall mounted fan 400mm sweep (18 inch) Hi flow Wall fan with screw and making hole to existing wall and connecting up including provision of cable from ceiling rose to fan Complete all as specified and directed.

M/s J P Traders