Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAccepted-AOC | ₹1.4 L | L1 | Accepted-AOC lowest bidder |
| 2 | L2₹1.5 L+₹14,329.73 (10.6%)Rejected-Finance | ₹1.5 L+₹14,329.73 (10.6%) | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | CHANDUKUTTY K L2 | SHIJITH P L1 |
|---|---|---|---|---|---|
| 1.00DETAILED ESTIMATE | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.34 | cum | 330 ₹443.52 | 264.33 ₹355.26 Lowest |
| 1.00 | 50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. | 1.79 | cum | 7,489 ₹13,420.29 | 7,066.97 ₹12,664.01 Lowest |
| 1.00 | 50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete | 1.66 | cum | 6,600 ₹10,929.6 Lowest | 6,687.49 ₹11,074.48 |
| 1.00 | 9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding | 135.3 | kg | 180 ₹24,354 | 166.78 ₹22,565.33 Lowest |
| 1.00 | 10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces | 3.6 | sqm | 4,500 ₹16,200 | 4,405.68 ₹15,860.45 Lowest |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 11.06 | sqm | 316 ₹3,494.33 | 271.7 ₹3,004.46 Lowest |
| 1.01 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 11.06 | sqm | 75 ₹829.35 | 59.41 ₹656.96 Lowest |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 26.09 | sqm | 170 ₹4,435.64 | 121.14 ₹3,160.78 Lowest |
| 1.01 | OD443423/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness
with zinc
coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on
both side of
the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25
microns
minimum to avoid scratches during transportation and should be supplied in single length upto
12 metre or
as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws
of size
(5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved
surfaces, excluding the
cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 28.8 | sqm | 550 ₹15,840 | 372 ₹10,713.6 Lowest |
Tender Value
₹1.7 L
EMD Value
₹4,226
Closing Date
9 Feb 2026, 6:00 pmClosed
Assistant Engineer
LID and EW Section Thalakkulathur GP Kozhikode
Building work
2026_LSGD_832644_1
LSGD/CELSGD/TR/4239/2026
Open Tender
Civil Works - Buildings
Item Rate
Thalakkulathur G P
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,226
Yes
14 Sept 2026
2 Feb 2026
11 Feb 2026
2 Feb 2026
9 Feb 2026
2 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1DETAILED ESTIMATE | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.34 | cum | - | - |
| 1.002 | 50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. | 1.79 | cum | - | - |
| 1.003 | 50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete | 1.66 | cum | - | - |
| 1.004 | 9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding | 135.3 | kg | - | - |
| 1.005 | 10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces | 3.6 | sqm | - | - |
| 1.006 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 11.06 | sqm | - | - |
| 1.007 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 11.06 | sqm | - | - |
| 1.008 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 26.09 | sqm | - | - |
| 1.009 | OD443423/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness
with zinc
coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on
both side of
the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25
microns
minimum to avoid scratches during transportation and should be supplied in single length upto
12 metre or
as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws
of size
(5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved
surfaces, excluding the
cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 28.8 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
sbd201.pdf
Tender Documents • 0.97 MB
preagre201.pdf
Other Document • 0.25 MB
BOQ_1399737.xls
BOQ • 0.31 MB
fee201.pdf
Other Document • 0.27 MB
form201.pdf
Other Document • 0.25 MB
affi201.pdf
Other Document • 0.23 MB
EPAY.pdf
Other Document • 0.23 MB
intepact.pdf
Other Document • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .