ADDN /ALTN TO BLDG NO P-10 AT GHUNGHORA GRN UNDER GE DEHRADUN

Amount

M&L for brickwork with subclass ‘B’ bricks using old size bricks, straight or curved on plan exc 6m mean radius, built in 1:6 complete including demolition of existing brick work complete all as specified and directed.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:3 on on fair faces of concrete surfaces finished even and smooth without using extra cement as in ceiling complete all as specified and directed.

M&L for preparation of wall and applying interior grade wall care putty 1.5 mm thick to make the surface smooth complete all as specified and directed.

M&L for preparation of wall and applying exterior grade wall care putty 1.5 mm thick to make the surface smooth complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for complete removal of existing treatment of old surface of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paint including preparation of surface complete all as specified and directed.

M&L for prepration of new plastered surface and applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed.

M&L for prepration with complete removal of existing treatment of old plastered surface and applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified and directed.

Taking down chowkat with shutter of any description (without taking of shutter from frame) n. exc 1.5 Sqm each complete all as specified and directed.

All as per item No 12 above but exc 1.5 sqm & not exc. 4 sqm each.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm complete all as specified and directed.

S&F Pressed steel frames of size 105x60mm for doors with one or more rebatesincluding necessary fixinglugs, hinges, lock strike plate,etc and filled the frame with and including PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate complete all as specified and directed.

S&F Pressed steel frames of size 165x60mm for doors with one or more rebatesincluding necessary fixinglugs, hinges, lock strike plate,etc and filled the frame with and including PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate complete all as specified and directed.

S&F flush shutters 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on other sides, one face is covered with decorative face veneer teak wood finished with lipping/frame to match complete all as specified and as directed.

S & F 30mm thick second class hardwood glazed and skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F Factory made 100% solid wood plastic composite ( WPC) door frame of size 70 mm x 40 mm mm made from wood plastic composite (single etruded process) material with density 750 kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specified and drawing complete all as specified and diercted.

S&F 30mm thick moulded WPC factory made 100 % solid ( conforming as per IS-4020) made from lead free single extruded with 2,4, or 6 raised panel design on the front side with 10 mm deep mould on single with grain texure and back side plain with density not less than 650 Kg/cum, Manufacturer by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire retardent and having screw holding capacity complete all as specified and as directed.

S&F 150mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed .

S&F 150mm size solid in one piece stainless steel 202 grade bright finish barrel tower bolt 10 m dia shoot and fixed with stainless steel screws complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and as directed.

S&F stainless steel sliding door bolts SS 204 grade, hasp and staple type with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and directed.

S&F Floor door stopper of Aluminium alloy body double spring and tongue, overall length of cover plate 150 mm, anodized with hard drawn steel spring, fixed to shutters complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including preparation of steel surfaces complete all as specified and directed.

M&L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed.

S & F Continuous (Piano) hinges, mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected.

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins,trusses etc. fixed with angle cleat or other connecting plate complete confirming to Fe-410W(Gde E-250) complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls/chajja covering etc fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge /covering/ cladding to wall, fixed with self tapping screws as specified.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed.

M&L for 25mm thickPCC 1:2:4 type B-1 ( using 20 mm graded aggregate) including demolition of existing concrete complete all as specified and directed.

S&F vitreous china wash down water closet pan padestal pattern white with seat cover excluding fixing bolts but including jointing to flushing cistern and flush pipe anti syphonage pipe including Jet spray etc complete all as specified and directed.

S&F in repair CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legs & flanges complete all as specified and directed.

S&F in repair 15mm dia CP brass chromium plated Central hole basin/sink mixer with accessories for fixing hot and cold water, dcrewed down for 15mm bore GI pipe, complete all as specified and directed.

S&F in repair 15mm bore chromium plated fancy type bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed.

S&F in repair chromium plated stop valves/ angle valve/ concealed angle valve etc, cast copper alloy, screwed down both high pressure, with crutch or butterfly handle, screwed both ends fixed, 15mm bore complete all as specified and directed.

S&F in repair 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specified and directed.

S&F in repair 10 ltr capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long band for out let connection of cistern with WC complete fixing the cistern with wall in pressured connecting with WC complete all as specified and directed.

S&F in repair vitreous china wash hand basin with pedestal, white, flat back, size 580x450mm excluding taps, waste pipe chain and plug and porcelain but including brackets complete all as specified and directed.

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed.

Taking up or down 15 mm bore GI tubing and connections with all fittings including cleaning for refixing or removing from site complete all as specified and directed.

Taking up or down 20 mm bore GI tubing and connections with all fittings including cleaning for refixing or removing from site complete all as specified and directed.

S&F 15mm bore galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm brass float valve with pvc ball complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 type C-2 as in plinth protection, finished even and fair complete all as specified and directed.

S & F 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed to wall including dismantling of old pipes complete all as specified and directed.

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed to wall including dismantling of old pipes complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

M & L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work including demolition of existing concrete complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F 20mm dia brass chromium plated tubular towel rails fancy, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs CP brass Soap dish 6 inches size, complete all as specified and directed.

S&F in repair glass shelf assembly consisting of 5.5 mm thick toughened glass with CP railing and brass brackets of size 500x125 mm, complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including 20 mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick in risers, steps, skirting, dado etc fixed over and including 10mm thick rendering in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

M&L for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate including demolition of existing concrete complete all as specified and directed.

M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F factory made pre laminated WPC flush type shutter of 18mm (+ 0.5) thickness consisting of panel of 18mm (+0.7mm) thick celuka ply, of denistity 600 Kg per cum manufactured by ISO-9000 certified company, using for shutter celuka ply 18mm thick and fixed with frame, all four edges of shutters, using 13/6 size self tapping steel screws. The thickness of shutter is edges painted by matching colour of PVC lining of prelam coloured PVC sheet using etc, complete all as specified and directed.

S&F stainless steel auto closing 35mm of of crank(KH-002) openable at 110 degree for kitchen cabinet shutterscomplete all as specified and directed.

S&F in repairs stainless steel peg set of five with cromium plated back plate 304 grade,40mm wide fixed with chromium plated screw, complete all as specified and directed.

S&F in repair chrome plated stainless steel wire basket (storage basket) pull out type for large utensils of size 480 x 500 x 150 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed.

S&F in repair chrome plated stainless steel wire basket (plate basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed.

S&F in repair chrome plated stainless steel wire basket (cup and saucer basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed.

S&F in repair chrome plated stainless steel wire basket (cutlery basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed.

S&F in repair chrome plated stainless steel wire basket (grain trolly basket) pull out type for large utensils of size 480 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed.

M&L for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for coloured Glazed ceramic tiles as in dado, skirting on vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick fixed over and including 10mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile including dismantling existing tiles with backing complete all as specified and directed.

M&L for Vitrified ceramic tiles light shade 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc.set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/ dado etc. fixed over and including 10mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile including dismantling existing tiles complete all as specified and directed.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10 but not exc 20cm girth complete all as specified and directed.

S&F aluminium anodised door with frame and shutter and glazing with 5.0 mm thick plain glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary including taking down unserviceable existing door etc complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plug width;- 85x44.5x1.20 mm thick Bottom;- 100x44.5x1.20 mm thick Style;- 85x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 150mm Aluminium tower bold 9.9 mm dia shoot 200 mm long Mortice lock stainless steel - 100 mm 4 lever Aluminium stopper cleat aluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface (ii) PCC shall be measured and paid seperatelly Note- Work will be carried out up to 5th storey

S&F aluminium anodised partition with frame, (fixed type) shutte and glazing with 4.8mm thick plain glass and 12mm thick prelaminated particle board interior grade in bottom panel, glass fixed with rubber gasket with aluminium glazing clips & snap beading including taking down unserviceable existing partion etc of following sizes;- Frame of vertical/horizontal section;- 44.5x44.5x1.22mm thick Bottom section;-100x44.5x1.22 mm thick Note- Work will be carried out up to 5th storey

S&F in repair 20 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed.

S&F in repair glass corner shelf suitable size made of 5mm thick toughened glass with CP railing complete all as specified and directed.

S&F in replacement powder coated Aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A (15mm) 3 track of Jindal section numbers for sliding windows, and glazed with glass 5mm thick, fixed with glazing clips, aluminium grill with mesh size 75 mm and aluminium bar 6 mm XPM type, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc, complete all as specified and directed. Shutter Top & bottom size:- 37.50 x 15.00 x 1.60 mm Shutter inner lock size:- 37.50 x 15.00 x 1.60 mm Shutter side (Handle) size:- 37.50 x 15.00 x 1.36 mm Chowkhat bottom size:- 50.30 x 26.00 x 1.20 mm Chowkhat top & sides size:- 50.30 x 26.00 x 1.00 mm

Excavating in trenches in any type of soil , n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings and heavy duty accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with suitable size hylum sheet , one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed.

One light/ceiling fan/ Exhaust fan/bell point controlled by one-one way switch.

One light point controlled by two way switch.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

All as per item No 93.00 above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm.

All as per item No 93.00 above but up to Sheet matel enclosure MCB DB with plug socket independent, with cable 4 Sq mm size, with earth continuity coductor of size 4 Sqmm.

S&F switch piano flush, button type 5 Amp SP 250 V AC complete all as specified & directed.

S&F switch piano flush button type 15 Amps SP 250 V AC complete all as specified & directed.

S&F socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

S&F socket outlet two in one three pin 5 Amp and 15 Amp 2 module 120 W flush type complete all as specified and directed.

S&F step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts 6 Ampds 400 watts complete all as specified and directed.

S&F bell switch paino flush button type 5 Amp complete all as specified and directed.

S&F switch paino flush button type 5 Amp SP 2 way complete 250 V AC all as specified and directed.

S&F Bell Multi Music type,250 volts,single phase complete all as specified and directed.

S&F in replacement of sheet metal enclosure SPN with 3 pin earth metal plug and socket complete with one SPN MCB 20 Amps, 240 volts complete all as specified and directed.

S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 220 V AC complete all as specified and directed.

S&F lamp holder insulated body with back plate suitable for angle and batten fitting including LED bulb 9 watt complete all as specified and directed.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 10Sqmm (nominal area) drawing in and including 25 mm dia or higher PVC concealed conduit heavy duty accessories and fittings, PVC insulated unsheathed FRLS cable copper conductor multistranded of size 10 Sqmm as earth wire upto common earth and connected to earth dolly including taking down old unserviceable complete all as specified & directed. Note: 03 runs of copper cable and 01 run of conduit will be measured as 01 RM unit length.

S&F sheet metal enclosures 240 volt with 200 Amp rated bus bar for double door 8 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and 06 MCB SP as out going complete all as specified and directed. (MCBs will be measured and paid separately)

S&F MCB double pole 240 Volt 10 KA 40 Amp 'B' series complete all as specified & directed.

S&F MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series all as specified and directed.

S&F in replacement wall mounted LED tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

S&F in replacement mirror light 9/10 Watt LED tube light with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement LED light fitting decorative wall mounting SS brush finish fixture with frosted glass suitable for upto 1x40 watt mini glass lamp with and including one no 12 watt LED lamp with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement of ceiling fan 1200 mm sweep single phase 230 volts double ball bearing with down rod, canopy, blades, BLDC TYPE, 5 star rated including connecting with twisted three cord flaxible copper conductor cable (23/.0076 ) from ceiling rose to connector of fan comlete all as specified and directed. ( Note: Old unserviceable ceiling fan will be deposited in E/M store yard without any extra cost)

S&F exhaust fan, steel body AC single Phase, heavy duty, copper winding 230V, 300mm sweep, 900 RPM, single phase, 230V AC with louver and making hole with fixing arrangement on wall with frame holdfastner, bolt, washer etcincluding connection with twisted white three core flexible copper multistranded conductor cable from ceiling rose to connector complete all as specified and directed.

S&F Air ventilation fan made of sturdy Engineering plastic complete with louvers shutter, 250 mm sweep, 1200 RPM, single phase, 230V AC including making hole with fixing arrangement on wall with frame holdfastner, bolt, washer etc including connection with twisted white three core flexible copper multistranded conductor cabl from ceiling rose to connector complete all as specified and directed. Note: old unserviveable fan shall be deposite in E/M yard without any extra cost.

S&F in replacement Geyser vertical mount type 25 Ltrs capacity five star rated, shockproof and rust proof metal body compact size including two nos PVC connection heavy duty and connecting with all fixing arrangement of nuts & bolts and fixing on wall complete all as specified & directed. (Note: old unserviceable Geyser will be deposited in E/ M store yard without any extra cost )

S & F Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one 240 Volts 20 amp single pole MCB complete all as specrified & directed.

S&F Integral LED Bldg security Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 45watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours including MS bracket made of 32mm dia GI medium grade 1.2m & taking out old unserviceable street light complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x 6.0mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C-1, pre-cast RCC (1:2:4) type B-1, cover slab 54x54x 5cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways and with one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil and necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009) and as directed.

Pragati Enterprises (BID ID -3513713)

M/S C S AITHANI (BID ID -3513846)

M/S S P BUILDERS (BID ID -3520059)