Design, Build and Operate contract for Augumentation of Bhadara Regional Water Supply Scheme

Name of Work: Bid documents for Working Survey, Design, Build & Operate Contract for Providing,

Supplying, Laying DI/PVC Pipe Line, Testing Commissioning of WTP, U/G Sump, Pump House and

Pumping Machinery for Bhadara Regional Augmentation Water Supply Scheme including Comprehensive

Operation & Preventive maintenance for supply of water for 120 months. Taluka: Jamkandorna, Jetpur,

1) The bidder shall quote his firm and fixed price for the entire work under this Contract, defined in

more details in various sections of this bid document

2) The rates and prices shall be submitted in the electronic formats given by n-procure which is

called Schedule-B. Rates and prices received in any other formats will be rejected and the Bids will

be disqualified.

3) It will be entirely at the discretion of the Employer to accept or reject the bidder's proposal,

without giving any reasons whatsoever and the bidder shall not be permitted to withdraw his bid on

from the by client

5) In Schedule-B the Bidder shall quote prices for the items on % tage rate of overall work / lump

sum / unit rate as called for against the BOQ item

tentative quantities of the work there of for the guidance of the bidder. For any excess over tender

quantities, Extra items and variations in quantities, Refer Clause No 14 of Volume IB-General

Conditions of Contract

7) The total of the item prices in Schedule B1, Schedule B2 shall be equal to the price quoted by

except for items under-price variation clause. In case of any discrepancy noted in the various price

schedules, those in Schedule B will be considered and binding on the Contractor. The prices in

Schedule B1 Schedule B2 of the successful bidder shall be corrected accordingly.

8) The bidder is not required to quote their prices in Schedule C O&M prices. The rates mentioned

in the Schedule C for O&M are fixed and will be the basis for payment during O&M as per tender

terms and conditions. The Amount of Schedule-C shall not be carried forward to Schedule B for

comparison and evaluation. But it shall be added to schedule) B (After rebate, if any) for overall

cost of tender & shall form a part of the Contract Agreement.

9) Wherever for a particular item the quantities have been specified payment shall be on unit rate

basis and unit Variation in quantity will be paid with pro rata basis.

10) Each item is to be individually/ Overall work is to be % tage base priced online and the

Schedules of prices shall be left blank except where the item description requires the item to be

priced on "as applicable" basis. The item shall not be priced if it is "not applicable to the bidder's

design, in which case the bidder shall add the words "NOT APPLICABLE. The wording in the item

Volume-III, PRICE BID AUG. OF Bhadara RWSS

description is for subject matter guidance only, clause references are indicative only and all other

relevant clauses shall also be referred to. The prices shall allow for all the works covered under the

bid and all liabilities and contractual obligations whether separately specified or not. Items against

which no prices are quoted shall not be separately paid for and the bidder shall be deemed to have

covered the cost of execution of such items (according to the requirements of the bid document) in

the prices quoted for other items.

working/safety of the system as specified, will not be separately paid for by the Employer when

executed and shall be deemed to be already covered by other items and rates listed in the price

sheets No extra payment shall be given for any item which is required to complete and perform the

12) Bidder shall not to quote for O&M in Schedule-C. In case of any discrepancy noted in the

13) Schedule 'D gives the basis of interim payment for construction of civil works

considered for financial evaluation of the bid.

15) The bidder shall be deemed to have allowed in his price for provision, maintenance and final

removal of all temporary works of whatsoever nature required for construction including temporary

bunds, diverting water, pumping, de-watering etc. for the proper execution of works. The rates shall

also be deemed to include any works and setting out that may be required to be carried out for

laying out of all the works involved.

16) Prices shall be filled online only.

Specifications and other sections of these bid documents and these documents are to be taken as

mutually explanatory of one another.

18) The bidder shall interpret the data furnished and carry out any additional survey work, or

investigation work required at his own cost.

19) The prices quoted shall also include the cost of materials utilized for testing.

20) The bidder should acquaint himself with the site conditions including the access to Work site.

The successful bidder shall have to make suitable access to work sites at his own cost. These

accesses will be used by the other contractors working for GWSSB.

shall include all the equipment / materials / accessories and services required as per the

22) 1% of the value of work will be deducted from the Running bill against labour cess which is

non-refundable.

23) Third Party Inspection / CSC agency will be deployed by GWSSB and charges of the same will

be borne by GWSSB

Volume-III, PRICE BID AUG. OF Bhadara RWSS

24) Any expenditure incurred by inspection/ CSC agency for the work misinformed by the

contractor and charges of inspection/ CSC agency without any work due to misinformation shall be

recovered from the contractor

25) The prices shall be quoted prices shall be quoted exclusive of GST, but inclusive of all other

taxes, royalties and duties prevailing at the time of submission of the bids. Statutory variation if any

during the currency of contract shall have to borne by the agency which shall be not reimbursed by

26) The rates quoted shall be the approved tender rates and tender conditions of price variations

GST shall be paid as per prevailing rates at the time of payment. The TDS shall be deducted at

source as per provision of IT rules and GWSSB policy.

27) The rates should be quoted exclusive of GST but inclusive of all other taxes as per Volume -1

(B), General conditions of Contract, Clause No.

28) The Bidders shall have to quote the rates in this tender keeping in view of the GST. The

Complete responsibility of taxes, duties, levies rests with the Contractor/Agency only.

29) The process requires that the bidder shall quote his price for the work components contained in

period of performance of the contract except price variation allowed for supply of MS/DI/PVC/GI

pipe as per Volume-1 (B) Clause No. 59. General Conditions of Contract

30) Payment shall be made for the components for which lump sum prices are quoted, as per the

schedule of payment. Total cost will be worked out on the basis of work done of individual items

and rates quoted against those particular items only.

31) Royalties. The contractor shall be liable to pay the royalty of the quarried materials/ minerals

used in the construction of works at the rates specified in the Narmada Water Resources, Water

Supply & Kalpasar Dept. Resolution No. GEN-2010-595- (6)- M.I.Cell (K-1) Dt. 29-4-2011,

(Gujarati Version Copy enclosed) and shall be recovered from the running bills of the work from

time to time and remaining amount if any shall be recovered from the final bill before releasing the

security deposit of the work. The contractor shall furnish the statement showing the quantity of

quarried materials / minerals from whom purchased (with full address of the seller) and copies of

the bills for purchase to the Executive Engineer of the in charge of the work. The contractor shall

also furnish such additional information as regards royalty payment to the competent authority

32) Agency shall have to take Insurance policy and intimate to GWSSB along with the evidence

within time limit. In case of noncompliance entire responsibility shall be rest with the agency and

required amount shall be recovered from any due amount of the agency.

33) GWSSB can recover penalty amount from the agency for not taking the insurance. Though the

penalty amount is recovered, responsibility of the agency for taking insurance shall be continued

and will not be escaped from the responsibility.

34) If There is provision for dismantling & buyback of old pumping machinery HSCF/HMSM pump

set with co-ordinated mechanical accessories, Electrical equipment’s etc. The details of buy back

items with quantity is shown in schedule-E of price bid. The buyback amount is considered as per

abstract sheet of buyback and will be deducted from agency bill.

Volume-III, PRICE BID AUG. OF Bhadara RWSS

35) The agency shall be procure & supply 1 Color Printer and 7 sets Personal computer system

with multi- Function Printer free of cost within 1 month from date of Work order to sub Division

office Dhoraji Sub Division office as per instruction by Engineer-in-Charge.

The configuration of computer system/Printer is as under.

 Computer Operating System Windows 10 or latest edition.

 CPU Model with Intel processor Core i5 – 11th generation @2.60 GHz

 Brand HP or Lenovo

 Screen Size 21 Inch And Above

 Hard Drive Size 1 TB & Above

 Ram Size 8 GB & Above

 SD 500 GB & Above

 Printer Brother L2541 dw Multifunction All in One Printer with Fax,scanner , Networking &

 Color Printer Epson EcoTANK l6270 a4 Wifi Duplex Ink Tank Printer

Signature of contractor Executive Engineer

P.H. Works Dn., G.W.S.S.B

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Bidders are required to fill up all the blank spaces in this Bid Form.

THE EXECUTIVE ENGINEER,

PUBLIC HEALTH WORKS DIVISION,

SUB: Bid documents for Working Survey, Design, Build & Operate Contract for Providing, Supplying, Laying

DI/PVC Pipe Line, Testing Commissioning of WTP, U/G Sump, Pump House and Pumping Machinery for

Bhadara Regional Augmentation Water Supply Scheme including Comprehensive Operation & Preventive

maintenance for supply of water (Incl Fofal RWSS) for 120 months. Taluka: Jamkandorna, Jetpur,

1. Having visited the site and examined the Bid Documents, Drawings, Conditions of Contract,

including Addenda/Amendments to the above, for the execution of the above Contract, we the

undersigned offer to design, Engineer, procure, construct, complete, commission, operate and

maintain the whole of the said works for 5 years from the date of commissioning including

defects liability period as given in Conditions of Contract and in conformity with the drawings,

Documents, including Addenda Nos.__________ (insert numbers) for Lump sum fixed price of

Construction including free trial run for three months or such other sum as may be ascertained

in accordance with the conditions.

2. I/We agree that

a) If we fail to provide required facilities to the Employer’s representative or any other

person/Agency by the Employer to perform on his behalf for carrying out the inspection and

testing of materials and workmanship.

b) If we incorporate into the Works, materials before they are tested and approved by the

Engineer’s representative.

c) If we fail to deliver pure water of required quantity according to the

conditions/stipulations of the Contract, the Engineer will be at liberty to take any action

including termination of Contract and impose at his absolute discretion any penalties, and/or

reject the work.

3. We undertake, if our Bid is accepted, to complete and deliver the works in accordance with

the Contract within _________ months, inclusive of monsoons, from the date or receipt of

Letter of Acceptance issued to us by you.

4. We agree to abide by this Bid for a period of 180 days from the Last date of submission of the

bill and it shall remain binding upon us and may be accepted at any time before the expiry of

5. In the event of our Bid being accepted, we agree to enter into a formal Contract Agreement

with you incorporating the conditions of Contract there to annex but until such agreement is

Volume-III, PRICE BID AUG. OF Bhadara RWSS

prepared this Bid together with your written acceptance thereof shall constitute a binding

Contract between us.

6. We agree, if our Bid is accepted, to furnish performance /Security in the forms and of value

specified in the Clause 1 of Volume-IB, “General Conditions of Contract”.

7. We have independently considered the amounts of liquidated damages shown in Appendix to

Bid and agree that they represent a fair estimate of the damages likely to be suffered by you

in the event of the work not being completed by us in time.

8. We understand that you are not bound to accept the lowest or any Bid you may receive.

(Name of the Person)

Company Seal _____________________

Duly authorized to sign Bid for and on behalf of (fill in block capitals)

Witness Signature ___________________________

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Augumentation of Bhadara Regional Water Supply Scheme "

Taluka- Jamkandorna, Jetpur Dist-Rajkot

Name of Work- Working Survey, Design, Build & Operate Contract for Providing, Supplying, Laying

DI/PVC Pipe Line, Testing Commissioning of WTP, U/G Sump, Pump House and Pumping Machinery for

Bhadara Regional Augmentation Water Supply Scheme including Comprehensive Operation & Preventive

maintenance for supply of water (Incl Fofal RWSS) for 120 months. Taluka: Jamkandorna, Jetpur,

Schedule showing the material to be supplied to the contractor by GWSSB from store

specified below during the project execution work and during the M&R period after

commissioning the project.

Sr.No. Details of material Qty Rate Unit where material

Pipes and Valves for

Lowering, Laying and

(A) Nil Nil Nil Nil

Jointing during project

execution of work

Required pipes & Valves

(B) during the M&R period after Nil Nil Nil Nil

commissioning the project.

Necessary Bleaching powder

and PAC solution during the Department's

(C) M&R period after NA store anywhere

commissioning the project in Rajkot District

1. Materials not included in “Schedule – A” but required for the work shall be provided by the contractor

at his own cost.

2. Any materials required for items other than labour charges items mentioned in “Schedule – B” and

materials not included in “Schedule – A” but available with dept. will be issued on request of the

contractor at departmental issued rate or market rate whichever is more.

3. The contractor shall provide his own arrangement for loading, unloading and transporting the materials

issued by the dept. from store to site at his own cost. Contractor will be responsible for damages

whatsoever during transfer.

4. The unused materials issued by the department for this work shall be returned to the department in

good and acceptable condition by the contractors. Any such unused materials not returned by the

contractor in time or issued will be recovered at Double of (As per issue rate + 3% storage charge or

Board RC + 3% storage charges) whichever is more.

5. All materials such as Specials, Fittings, Spares, etc. shall be brought by Agency / Contractor at site of

6. The material which requires to be procured by contractor and same as available with the department

the same can be issued to the contractor after prior approval from the competent authority and

charged for the same will be at the current market rate or issue rate fixed by the department

whichever is higher. The contractor shall have to deposit total cost of materials issued or shall be

recovered from the running account bill.

7. The materials issued for the above work shall be used in the above O&M work only. If any of materials

issued for this work and found used in other works shall be charged at the double rate.

Volume-III, PRICE BID AUG. OF Bhadara RWSS

8. As per the instructions of the competent authority and availability of materials, if needed contractor

have to transport the same from the other store to ………Scheme for which no extra carting, loading,

unloading will be paid.

9. The materials issued free of cost to the contractor is to be transported to the site of work in good

condition by the contractor for which no extra payment will be made.

10. The materials to be brought/purchase by the contractor shall be got approval from the EIC before using

Signature of contractor Executive Engineer

P.H.Works Dn., G.W.S.S.B

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Augumentation of Bhadara Regional Water Supply Scheme "

Taluka- Jamkandorna, Jetpur Dist-Rajkot

SCHEDULE:-B : ABSTRACT

(A) Civil Section

B1 Schedule:- B1- Rising Main and Gravity Main Pipeline including

B2 Schedule:- B2: Conventional Water Treatment Plant

B3 Schedule:- B3: Construction of R.C.C. Sump

B4 Schedule:- B4- Constuction of PUMP HOUSE (Positive/Negative

B5 Schedule:- B5 Compound Wall

B6 Schedule:- B6 Repairing of Existing ESR of 5.0 LL at Ujala SHW

(B) Mechanical Section

B7.1 Schedule:- B7.1 Pumping Machinery for Canal Intake Head Work

B7.2 Schedule:- B7.2 Pumping Machinery for Dam site WTP Head

B7.3 Schedule:- B7.5 Pumping Machinery for Head Work : Ujala SHW

Capital Work:Total Amount Rs.

Capital Work:Total Amount Rs.

( C) Operation and maintance (Excluding Village level Storage & Its

Ancilliary work)

C-A SCHEDULE C- O & M WORK (Part:A-Regular O&M)

C-B SCHEDULE C- O & M WORK (Part:B-Periodic Maintanance)

O&M 10 for years :Total Amount Rs.

O&M 10 for years :Total Amount Rs.

Grand Total for Overall work Rs.

Grand Total for Overall work Rs.

I/We am/are willing to carry out the work at __________% above/below _____________ percentage

(should be written in figure & words) above/below the estimated rates mentioned above/below

amount of my/our tender worked out as under :-

Estimated Amount put to tender Estimated Amount put to tender.

(In words Rupees________________ (In words Rupees________________

Dy. Executive Engineer EXECUTIVE ENGINEER

P.H.S.Sub Division P. H. WORKS DIVISION

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Volume-III, PRICE BID AUG. OF Bhadara RWSS

SCHEDULE-B1 to B6

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Name of Work- Design, Build and Operate contract for Augumentation of Bhadara Regional Water Supply Scheme

Taluka- Jamkandorna,Jetpur Dist-Rajkot

Schedule:- B1- Rising Main and Gravity Main Pipeline including Crossings etc

Quantity UNIT Amount

Item Description (only (upto 50 ( Upto

(upto 200 ( Upto

figures) characters) Decimals )

characters) Decimals )

1.1 Providing and supplying in standard length ISI mark rigid unplasticised PVC

pipes suitable for potable water with ring fit joint including cost of rings, as per

IS specification no. 4985/1988 including all local and central taxes,

transportation,freight charges, octroi, inspection charges, loading, unloading,

conveyance to the departmental stores and including cost of jointing meterial

200 mm Dia PVC pipe 6 kg/cm2 4830.00 Rmt 665.00

1.2 160 mm Dia PVC pipe 6 kg/cm2 17420.00 Rmt 420.00

1.3 140 mm Dia PVC pipe 6 kg/cm2 4389.00 Rmt 326.00

1.4 110 mm Dia PVC pipe 6 kg/cm2 2699.00 Rmt 199.00

2.1 Providing and supplying D.I. K-7/K-9 grade pipes for following nominal bore

diameter with internal cement mortar lining including all taxes, insurance

transportation, freight charges , octroi, inspection charges, loading, unloading

,conveyance to department stores,stacking etc complete (IS8329-2000).

500 mm dia D.I. K-7 Pipe 62.00 Rmt 6505.00

2.2 400 mm dia D.I. K-7 Pipe 153.00 Rmt 4583.00

2.3 300 mm dia D.I. K-9 Pipe 102.00 Rmt 3788.00

2.4 200 mm dia D.I. K-9 Pipe 204.00 Rmt 2239.00

3.1 Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846

(Latest Edition) of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete.PN-1 With hand

wheel /cap operated (PD type short body)

Volume-III, PRICE BID AUG. OF Bhadara RWSS

4.1 Providing and supplying C. I. Temper proof Air valves with SS 304 Float gun

metal- nozzle of approved make & quality of following class and diameter

including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental stores,

stacking etc. complete

50 MM Temper Proof Air valves with Isolating Sluice Valve PN 1.0 61.00 No 11221.00

4.2 80 MM Temper Proof Air valves with Isolating Sluice Valve PN 1.0 1.00 No 13789.00

5.1 Manufacture, supply & Delivery of Ductile iron Flange Socket spigot bends,

tees, reducers or any other specials as per BS-EN-545/1995 Class-A series

K12 suitable for use with D.I. Pipes manufactured as per IS: 8329/1994

delivery of specials is to be made to GWSSB store or site of works any where

in Gujarat including all taxes, loading, unloading, carting, stacking, insurance,

inspection charges, octroi etc. complete.

Socket & Spigot Type 80 to 300 mm Dia 110.00 Kg 148.00

5.2 Socket & Spigot Type 300 mm Dia & Above 140.00 Kg 151.00

5.3 Flanged Type 80 to 300 mm Dia 110.00 Kg 155.00

5.4 Flanged Type 300 mm Dia & Above 140.00 Kg 158.00

6.1 Excavation for pipe line trenches for water supply, sewerage line, manhole

etc. all with shoring and struting if required as per required gradient and line

including safety provisions using site rails and stacking excavated stuff

including up to all required lead cleaning the site etc. complete for all lifts and

strata as specified. (A) Upto 1.50 mt depth1) In all sorts of soil and soft

murrum 5218.00 Cum 89.00

6.2 2) In Hard murrum, boulders,inlc Macadam Road 5218.00 Cum 135.00

6.3 3) in soft Rock and / or masonary in C.M. or L.M.or Lime Concrete. 5218.00 Cum 163.00

6.4 4) in Hard Rock and / or in C.C.1:2:4 or R.C.C.With blasting and Chiseling or

by Chiseling only 5218.00 Cum 372.00

7 Providing bedding incl. ramming, watering,levelling, consolidating etc.

complete. As per standard and instruction of engineer incharge

As above with selected excavated earth available near site 2581.00 Cum 60.00

8.1 L, L & J PVC/uPVC/cPVC pipes and specials

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and specials of

following class and diameter including cost of conveyance from stores to site

of works including cost of labour, material, cement solvent, giving satisfactory

hydraulic testing as per ISI code. including providing and supplying and fixing

of all type PVC/MS specials and fittings suitable to PVC pipe required for LLJ

incl. freigtht, loading,unloading stacking insurance and all taxes etc complete.

Including additional Job connections to the existing pipeline or structure with

all required materials and manpower required for commissioning of

pipeline/Structure as per actual site situation.

200 MM PVC pipeline 6 kg/cm2/ / 8 kg/cm2 4600.00 Rmt 37.00

8.2 160 mm Dia PVC pipeline 6 kg/cm2 / 8 kg/cm2 16590.00 Rmt 28.00

Volume-III, PRICE BID AUG. OF Bhadara RWSS

8.3 140 mm Dia PVC pipeline 6 kg/cm2 / 8 kg/cm2 4180.00 Rmt 23.00

8.4 110 mm Dia PVC pipeline 6 kg/cm2 / 8 kg/cm2 2570.00 Rmt 19.00

9.1 Lowring, laying and jointing C.I. S & S spun pipes suitable for Tyton joints /

Mortar lined D.I. K-7 Pipes of various classes with CI / MS specials of

following diameters in proper position ,grade and alingnment as directed by

engineer in charge including hydraulic testing etc. comp.

500 mm dia D.I. K-7/K-9 Pipe 60.00 Rmt 312.00

9.2 400 mm dia D.I. K-7/K-9 Pipe 150.00 Rmt 225.00

9.3 300 mm dia D.I. K-7/K-9 Pipe 100.00 Rmt 155.00

9.4 200 mm dia D.I. K-7/K-9 Pipe 200.00 Rmt 99.00

10.1 Lowering, laying and jointing in position following C. I. / D/F Reflux valves,

Butterfly valves, Sluice valves and Air valves including cost of all labour,

jointing material, including nut bolts and giving satisfactory hydraulic testing,

A) Sluice Valves

10.8 B) Air Valves:

1) 50 MM Temper Proof Air valves with Isolating Sluice Valve PN 1.0 61.00 No 757.00

10.9 2) 80 MM Temper Proof Air valves with Isolating Sluice Valve PN 1.0 1.00 No 811.00

11.1 Erection of air valve Riser by installing new M.S. pipe of 6mm thick and

mt length with necessary fittings such as flange of appropriate size, nut, bolts

and embedded the pipe in R CC M;15 with offset of 10 cm around the pipe

with necessary steel etc complete.

1) For For Air valve 80 MM Dia & MS Pipe 2.00 No 4350.00

11.2 3) For Air valve 50 MM Dia & MS Pipe 61.00 No 3112.00

12.1 Construction of valves chambers in brick or bela stone masonry, locally

available in C. M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of

trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3 and

cement pointing outside in C. M. 1:3 and top cover of precast RCC slab

mm thick (with key hole in two parts, each with handles or MS Bar etc.

complete as given size) Upto 1 Mt. depth from G. L. to pipe invert level incl.

complete civil works but excl. cost of excavation and refilling, with cast in situ

RCC slab in one single piece with fixing of CI-MH Frame and cover (excl.

cost of CI-MH Frame and cover) with 23 mm thick brick masonry wall in

C.M.1:6 With precast slab in two parts 15 mm 2.00 No 11351.00

Volume-III, PRICE BID AUG. OF Bhadara RWSS

(1) For Valve size 300/250 MM

1.1) Size of 1.30 m x 1.30 m and 1.0 m deep

12.2 1.2) For 1 Mtr. Extra Depth for Size of 1.30 m x 1.30 m and 1.0 m deep 1.00 Rmt 6084.00

12.3 (2) For Valve size 200 MM To 80 MM

2.1) Size of 0.90 m x 0.90 m and 1.0 m deep 11.00 No 7738.00

12.4 2.2) For 1 Mtr. Extra Depth for Size of 0.90 m x 0.90 m and 1.0 m deep 4.95 Rmt 4479.00

13 Providing CC M 100 for encasing pipes using trap metal size 12 mm to

mm incl. form work curing consolidation etc complete for various location on

pipe line. Using trap metal 20mm nominal size 290.00 Cum 4113.80

14 Providing and casting in situ C.C. in grade M-15 (approx. corresp. to prop.

1:2:4) (proportions as per mix design or as per Table 9 of IS456 2000 in

masses by weigh batching ) using granite, quartzite trap metal of size 6 mm

to 20 mm for RCC work, including scaffolding centering, form work, needle

vibrated consolidation, curing comp. up to 6 meter depth or height (excluding

cost of reinforcement and neat finishing) with centering and shuttering/

deshuttering etc. comp. for structure for otherthan water retaining. upto

Footing or foundation (with form work) 192.00 Cum 4906.00

15 Supplying cutting, bending, binding and placing in position steel as per plan

and design and as per ISS 2502 including cost of steel and binding wire for

reservoirs/structures only including lift up to 6 meter height or depth below

G.L. For all diameters

Do-Thermo mechanically treated (TMT)bars Fe-415 grade for all diameters. 4800.00 Kg 73.208

16.1 Refilling the pipeline trenches incl. ramming, watering, consolidating

desposal of surplus stuff as directed within a radius of 3 km.

1) With selected soil brought from outside incl all lead. 1924.00 Cum 175.00

16.2 2) Refilling as directed. (From selected excavated stuff) 15654.00 Cum 22.00

17.1 Labour charges for Extra work for Job Connections for connecting of existing

structures or pipeline with proposed structure or pipeline in time bound

schedule incl. procuring of all types of tools and plants required for the job,

excavation, dewatering, cutting of all types pipe, required welding, installation

of all type of required specials, Hydraulic testing, refilling etc comp. excl.

pipeline material.required for connection

For Major size 300 MM Dia DI Pipeline 3.00 No 1500.00

Volume-III, PRICE BID AUG. OF Bhadara RWSS

17.3 For Major size 200 MM Dia DI Pipeline 3.00 No 1000.00

17.4 For Major size 200 MM Dia PVC Pipeline 1.00 No 625.00

17.5 For Major size160/140/110 MM Dia PVC Pipeline 4.00 No 375.00

18.1 Drilling of Horizontal bore hole for water main pipeline under the

Railway / Road tracks in all strata with required length including fixing

of M.S.(or as specified by Railway / Road authority) casing pipe of

suitable size and Thickness. Rate includes the cost of Drilling of bore

hole , Casing pipe & welding pushing etc complete but excluding the

cost of water main, valves and other items. Entire work should be as

per Approved Drawing and as per instruction of Railway / Road

authority for Following diameter of Bore hole. for MS pipe

Horizontal Drilling-600:& MS Casing Pipe-500 thick:8 25.00 Rmt 9166.00

18.2 Horizontal Drilling 500 & MS Casing pipe-400 thick 6 75.00 Rmt 6439.00

18.3 Horizontal Drilling 250 & MS Casing pipe-200 thick 5 50.00 Rmt 2148.00

19 To carry out survey work Co-Ordination liasation for "Standing crop

compensation"in land for laying water supply pipeline along the

alignment of Augmentation of Bhadara Regional Water Supply

Scheme including shifting of center line marking it on village map and

hissa to be taken for Standing crop compensation and submission of

drawing in 4 sets drawn in the scale of 1 cm=25 mt.along with original

tracing showing and marking their own survey numbers with CD

nos. etc. and defining Standing crop compensation strip of 15.00 m.

along the cross country in width on the map and showing revenue

survey number wise area and other details as per detailed

specifications. For Job work for legal formalities including getting

copy of 7/12, 6-A,form of perticular land non judicial Stamp paper, &

all required activities with all documents. For Job work for legal

formalities including getting 7/12, 6-A, non judicial Stamp paper, & all

required activities with all documents. 337 Nos 435.00

Dy. Executive Engineer EXECUTIVE ENGINEER

P.H.S.Sub Division P. H. WORKS DIVISION

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Name of Work- Design, Build and Operate contract for Augumentation of Bhadara Regional Water Supply Scheme

Taluka- Jamkandorna,Jetpur Dist-Rajkot

Schedule:- B2: Conventional Water Treatment Plant

Quantity (upto Tender Rate Amount

Item Description (only 50 ( Upto 2 ( Upto

figures) charact Decimals ) Decimals )

1.1 Designing (hydraulic, process, structural and aesthetic),constructing and commissioning

Conventional Water Treatment Plant consisting of all Civil, Mechanical and Electrical

components of various sub- works as given below including necessary hydraulic testing,

structural testing, equipment testing, trial run for 3 months, etc. complete as directed by

Engineer-in-charge (turn-key job). The design shall conform to IS / CPHEEO Manual.

2.1)Aeration Fountain/Casecade Aerator.

2.2) Ventury Flume / Partialflume With necessary flow measuring devices/meter consisting of

mechanical/digital indicator.

2.3) Flash Mixer: Rapid mixing device design confirming to IS : 7090 of 1985.Detenion time

60second, velocity gradient 300-400 sec-1 with fans gear and motor assembly as per design.

2.4) Flocculator : Design confirming to IS : 7208 – 1974 (Type-C) .Detention period 30miutes

with flocculator paddles with gear and motor assembly as per design .

2.5) Clarifier : Circular tank with horizontal flow pattern, detention period 2.5 hours, overflow rate

30 cubic meter per square meter per day (to be specified), Weir oading not more than 300 cubic

meter per meter per day, with mechanical sludge scraper confirming to IS : 10313 – 1982 and

bridge as per design with gear and motor assemblies.

2.6) Rapid Sand Filters and Filter House : Filter designed for filtration rate of 6,000 liters per

square meter per hour, minimum 2 beds for plant up to 10 MLD, for larger plants as specified,

pipe gallery and platform minimum 5.5 meter in width.

a) Filter Media Effective size of filter sand 0.45 to 0.70 mm, uniformity coefficient not more than

1.7 nor less than 1.3, depth of filter 0.75 M, free board 50 cm, gravel 0.45 M in depth, sand and

gravel conforming to IS : 8491 (i) – 77, backwash by air wash(if specified) and hard wash by

water, standard appurtenances (to be specified), rate of flow controller, filter gauge, sand

expansion gauge,etc.

(b) Wash water tank : Wash water tanks of capacity equal to 2% of designed quantity of filtered

water in a day (+) 10% with 8 to 10 m head (as specified) Wash water tank shall be constructed 1 No. 16106832.00

Volume-III, PRICE BID AUG. OF Bhadara RWSS

on RCC column/slabs only.

(c) Wash Water Pumps : Capacity to fill water tank in 1 hour with 100% standby.

(d) Air Blowers : Capable of delivering 600 LMP per square meter of free air, of filter area with

pressure@ 0.4 kg/square cm at the underdrains (100% standby).

(e) Valves/gates :Inlet, outlet, wash water inlet –outlet and all types and sizes of valves/ gates as

per design. (MOC of gate shall be CI)

(f) Gauges/meters : All types gauges and meters required for filter operations and backwashing

etc. asper design of specified make/brand.

2.7) Chemical House in Two Stories (floor wise area as specified) RCC framed structure with

brick masonry infill walls .ground floor and first flour area as per data/specifications shall be

provided. Minimum clear head room for doors, passages, galleries etc. shall be 2.10 m. It shall

be 2.40 m in case of Alum dosingtank.Ground floor to accommodate 90 days alum requirements

a) Sundrystorage

b) First floor to accommodate alum and lime tanks,etc.

c) SolutionTanks

Minimum 3 tanks (one for preparation, second for dosing and third as standby), each tank

capable of giving 8 hours maximum dose without terruption,minimum free board 0.30 M, trays

for dissolving, level indicator, mechanical agitation devices, solution feed and drain lines,

solution feed device constant head device, strength of solution up to 10% only) confirming to IS :

2.8) Store House (area as specified) : Suitable for alum storage of three months requirement in

monsoon with 10% extra capacity for other sundry articles.

2.9) Vacuum feed type Chlorinators – make to be specified and approved by GWSSB.

a) conforming to IS : 10533 – A Part –2/1983.

b) Rate of withdrawal shall be as per clause 6.1Table-1 confirming to IS 10553 (2)-1983

c) Chlorinator equipment and container room to confirm to IS: 10533 Part – 1/1983.

d) 100% standby shall beprovided. Chlorinator equipment and container room to confirm to

(d) 100% standby shall be provided.

2.10) By pass arrangements – C.I. or M.S. pipes (as specified) of size as per design Drainage

arrangements – RCC pipes up to plot boundary (as specified ) diameter as per design.Drainage

arrangements – RCC pipes up to plot boundary (as specified ) diameter as per design.

(Backwash drain with RCC pipe to plant boundery Or to recirculation sump),

(Clarifloculatorsludgeremoving drain with RCC pipe)

2.11) Electric installation : Both internal and external including entire plant area (as specified).

2.12) Laboratory equipments : As per requirement (to be specified during tendering).

2.13) Sanitary blocks : Carpet area – 15 square meter minimum up to 25 MLD and 25 square

meter above 25 MLD (or as specified).

2.14) Administrative block and internal roads : To accommodate office room, chlorine room,

laboratory room, panel board room, blower room etc. and asphalt road to connect all units from

main gate of plot.

2.15) Dewatering during entire work using any technique:Necessary Instrumentation and control

as per specifications (for ≥10 MLD WTP).

Volume-III, PRICE BID AUG. OF Bhadara RWSS

2.16) The plant shall be provided with required instrumentation equipment for measurement &

control functions, indicated below as a minimum, but not limited to the following:

Rate of Flow (ROF) Measurement at WTP Inlet Parshall Flume and at each Filter Bed Outlet.

Flow Meter shall be Ultrasonic type with remote display to indicate level and

corresponding/proportionate Flow values on field.

Torque switch at Clariflocculator for alarm of Overload and Trip function of Clariflocculator

Loss of Head (LOH) Measurement across each Filters. LOH Meter shall be Ultrasonic type with

remote display to indicate level values and Head Difference on field.

Level measurement at each Sump/ Tank/ ESR. Level Indicator shall be Float & board type to

indicate level values on field. Level switch shall be Displacer/Float type with Low & High set

point to start/ stop respective pumps.

Float & Horizontal Scale type level gauge at Chemical dosing tanks to indicate level values on

Pressure Gauges at each pump/ blower delivery line and at common header.

Constant Head Flow Measurement at Alum dosing tanks with Float operated flow meter. All

alarm/indications shall be provided in instrument chamber of MCC.pH indicator cum Transmitter

(Online Analyzer) to measure, display & transmit pH Value of Raw Water (Location: WTP

InletParshall Flume) and Clear Water (Location: CCT Outlet).Turbidity Indicator cum Transmitter

(Online Analyzer) to measure, display & transmit Turbidity Value of Raw Water (Location: WTP

Inlet Parshall Flume), settled water (Location: Clariflocculator outlet) and Clear Water (Location:

CCTOutlet).Chlorine Indicator cum Transmitter (Online Analyzer) to measure, display & transmit

Residual Chlorine Value of clear water (Location: CCT Outlet) and Chlorine Leak Detector at

Chlorination Room.Sampling Pump for Sampling to Laboratory at Raw Water Channel,At Inlet to

Filter & Outlet to FilterPLC based control panel with SCADA system shall be provided in central

control room of treatment plant for monitoring, control, recording, and logging etc. Necessary

alarms, status signals along with the measurements of process parameters etc. shall be

displayed in SCADASystem.Additional instruments & control equipments if any for safe, reliable

& efficient operation of treatment process.

Following conditions shall form a part and parcel of thetender

Filter house tiles should be glazed vitrified mat finish and tile on wall up to window sill. Around

valve area granite flooring to be provided.

All channels should be with inside china mosaic/epoxy coated.

All railing should be SS railing (SS 304) as per latest IS standard.

External paint should be of weather proof coating with primer and 3 coat paint

Opening of window & door should be framed with granite.

All platform for kitchen/laboratory shall be of granite and fixed in sandwich with bottom of

kota/white marble.

All Window shall be of Anodised Aluminum section (1.2mm guage section) with wired glasses,

also provided with grill / jaali/aluminium weldmesh to prevent birds entry.

Doors shall be of anodised aluminum section(1.2mm guage of section) partial glazed and partial

panel with 4mm backelite sheet. Main entry door should be 2.0meter wide with 3.0mtr entry

Roof top of all unit of the WTP is approchable through staircase. All staircase of entire WTP

Volume-III, PRICE BID AUG. OF Bhadara RWSS

should be RCC only.(No MS ladder or No MS Staircase)

Bathroom should have shower facilities.

Chlorination neutralized pits(Lime pit) shall be made and mock drill practice for leakage

neutralization to be carried out while commissioning Fire safety equipment with Safety kit.

At chlorination room safety mask and hand gloves, gum bootsetc.should be available.

All vehicle access roads shall be of RCC and balance of Paver block type

Proper arrangement shall be made for storage of PAC solution and Alum with arrangment of

vertical lifting of platform through guide rails operated by motors.

Proper sludge disposal arrangement shall be made with sludge drying beds

All building terrace shall be finished with high quality water proofing like china mosaic flooring

with proper slope and drainage for rain water

Minimum plinth height of filter house shall be 0.6 m. Also outlet channel RL shall be at plinth

Clear walkway excluding column and valve operating valves shall be 1 meter.

Air blower shall be placed on ground floor Pipe gallery shall be embedded in flooring Inlet pipe

from flash-mixture to Clariflocculator shall be epoxy coated.

Flooring of Loading area like tonner/alum store etc. shall be of Polished Kota stone flooring and

open/other space shall be of paver block pitching.

(1) Conditions from Sr. No. 2 to 2.16 shall from a part and parcle of the tender and must be

incorporated in draft tender papers of conventional treatment plants.

(2) Aerator must be provided.

(3) Hydraulic design criteria approved by Technical committee shall be referred and item

description shall be modified accordingly

(4) Structural design criteria approved by technical committee shall be applicable for design.

(5) Design flow shall be specified in M^3/hour in data sheet considering 22 hours WTP run time

in a day to treat requirement water quantity of a day (i.e.24 hours) of population to be served

with design rate of water supply. No separate overloading provision shall be kept in any tender

(6) All other details shall be as per design criteria and detail specifications

(7)The following rates are for sites falling in relevent seismic zone.

(8) The rates includes excavation ,refilling and throwing away extra stuff to lead up to 50 m.

(9) All Civil Structural shall be Designed For Considering Seismic Zone 3 of RajkotDistrict

(10) The following rates are for preliminary or rapid estimate of WTP.

1) At Proposed Fofal Dam site HW-13 MLD

Dy. Executive Engineer EXECUTIVE ENGINEER

P.H.S.Sub Division P. H. WORKS DIVISION

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Name of Work- Design, Build and Operate contract for Augumentation of Bhadara Regional Water Supply Scheme

Taluka- Jamkandorna,Jetpur Dist-Rajkot

Schedule:- B3: Construction of R.C.C. Sump

Quantity Tender Rate Amount

Item Description (only ( Upto 2 ( Upto

(upto 200 characte

figures) Decimals ) Decimals )

characters) rs)

1.1 Const. of RCC HGLR/Sump in cocrete Grade Preparing structural design of RCC Under Ground /

Partially under ground / above high ground level Reservoir of required capacity as per relevant

I.S.s and constructing the same, including excavation in all types of soil strata (including rock)

including shoring strutting if required, for loose soil / to protect from collapse due to near by traffic

load, casting 100 mm thick P.C.C. leveling course in M-15, Refilling the pit with proper soil and

disposing of the surplus stuff within a lead of 50 meters. Including cement plaster in CM 1:2 with

approved water proofing compound to inside water touching surface to container. Including all

types of labour and material charges of lowering, laying, erecting / hosting and jointing of pipe

assembly to inlet, outlet overflow, washout and bye pass arrangement as per hydraulic design.

Providing and fixing accessories like MS / GI Ladder, CI Manhole frame and cover, water level

indicator, adequate cowl type ventilators or lantern type ventilator with stainless steel jail.

W.S.Bella Masonry chambers for valves. Providing and applying three coats of cement paint /

snowcem to the out side face of structure. It also includes satisfactory water tightness test as per

relevant I.S. code and painting name of scheme and capacity on the tank as per direction of

engineer in charge. List of Indian Standards for Design of GSR / SUMP:- The structural design of

GSR shall be in accordance with provisions relevant I.Ss. (1) I.S. 3370, Part – 1 to 4, 2009 or

latest revised IS 3370-2009. (1.1) I.S. 3370 parr iii & IV 1965 or latest Revised (2) I.S. 456 –

2000 or latest revised. (3) I.S. 1893 – 2000 – 1984 or latest revised. (4) I.S. 875, Part – 1 to

1987 or latest revised. General Specifications:- (1) Water depth in container shall be adopted as

per data of tender. Capacity shall be calculated excluding free board of the reservoir. If water

depth is not specified, the suitable water depth / acceptable to field engineer in accordance with

hydraulic. (2) Shape of container (in plan) specified by in data shall be adopted in absence circular

shape shall be adopted. (3) Size shall be fixed as per availability of space (land area) at site /

acceptable engineer in charge. (4) Effect of overlapping of pressure bulbs on soil due near by

structure and proposed sump should be considered. (5) Care shall be taken that no damage

should occur to nearby existing structure. Compensation shall be paid for the same by agency. (6)

The minimum concrete grade for RCC shall be M-30. (7) HYSD Fe 415 / 500 grade reinforcing

bars confirming to I.S. 1786 / 1139 shall be considered in design. CRS / TMT bars shall be

provided. In saline atmosphere corrosion resistance stainless steel / HCR rebar shall be provided.

Any other steel can be used with approval of C.E./ in situation of non availability in market without

extra cost. (8) Minimum size (or thickness) of various components shall be provided as per tender

criteria / specifications in absence as per I.S./ Std. practice of G.W.S.S.B. Minimum dimensions

specified for various components in tender data / specifications shall be provided without fail. (9)

The safe bearing capacity (SBC) shall be referred from SBC test report. In absence of report it

shall be referred from data sheet. If poor soil is found / water table is met with during excavation

SBC shall be scientifically ascertained and design shall be revise. No extra shall be paid for

increase in quantity. (10) DI pipes and special shall only be used if type is not specified in tender.

(11) The rate shall include cost of dewatering during excavation making all arrangement when

water table meets within depth. (12) The structure shall be designed properly to resist uplift due to

ground water table specified in data or actual ground water table meets with during excavation. If 1.00 No 8706083.04

Volume-III, PRICE BID AUG. OF Bhadara RWSS

GWT / Uplift is mentioned in tender and during excavation it dose not meet 7.5% rate shall be

reduced. (13) SS pipes railing shall be provided over sump perifery when sump height is grater

than equl to 1.5 meter above ground level. (14.a) RCC staircase/RCC Steps should be provided

from GL to sump top slab based on the height of the GSR above/below the ground. 14.(b) RCC

Staircase with SS railing to be provided inside reservoir container. BB Masonry staircabin to be

provided to cover the same with MS safety door having locking arrangement to be provided for

GSR,Sump and HGLR of capacity more than 7.50 Lakh liter with top slab. if dome is constructed

as top slab then provide minimum opening of 900 mm X 2000 mm with curbing & SS railing

around. (15) Appearance of structure should be aesthetically good looking acceptable to

authority. (16) Any change in size, shape, depth below GL, height above GL, water depth, F.B.,

size of member etc can be permitted in exceptional case due to site condition or hydraulic design

requirement by C.E. No extra shall be paid for change. (17) Any change in data, dimensions,

shape, water depth, reduction in size if permitted by competent authority and if it reduces quantity

then payment shall be reduced prorate. (18) When capacity of GSR / Sump is grater than 20 lakh

litres two or suitable compartments acceptable to executive engineer shall be designed and

provided. (19) Agency shall engage qualified (at least graduate) consulting engineer for designing

the structure and he / she shall visit the site for guidance of work. (20) 75% part rate shall be

payable for concrete, reinforcement and plastering items of container until satisfactory hydraulic

testing for water tightness is performed as per tender condition. Till the work shall be treated as

incomplete. Above conditions / general specifications Sr. No. 1 to 20 are part and parcel of tender

(contact) and prevail over other provisions in tender. All Civil Structural Design for SUMPS shall

be Designed For Considering Seismic Zone 3 of Rajkot District

1) At Proposed Fofal HW-40 Lac Litre

As above rectangular Sump without water table (Sub soil water level below foundation)

1.2 2) At Existing HGLR of Zone-1: 2.0 Lac Litre

As above Circular HGLR without water table (Sub soil water level below foundation) 1.00 No 684691.70

1.3 3) At Canal Intake RW-15 Lac Liter

As above Rectangular Sump with water table (Sub soil water level below foundation)

The sump size (LXB) should be kept as per the limited land available. Also, the depth (D)

should be kept as per the hydraulics to get sufficient water from the canal at the sump inlet

and as per the turbine pump operating in the pump house to be constructed above the

sump itself. 1.00 No 4195721.43

1.4 4) At Ujala SHW of Fofal 1-2-10 Lac litre

As above circular Sump without water table (Sub soil water level below foundation) 1.00 No 2726737.77

Dy. Executive Engineer EXECUTIVE ENGINEER

P.H.S.Sub Division P. H. WORKS DIVISION

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Name of Work- Design, Build and Operate contract for Augumentation of Bhadara Regional Water Supply Scheme

Taluka- Jamkandorna,Jetpur Dist-Rajkot

Schedule:- B4- Constuction of PUMP HOUSE (Positive/Negative Suction)

Quantity UNIT Tender Rate Amount

Item Description (only (upto 50 ( Upto 2 ( Upto

figures) characters) Decimals ) Decimals )

1.1 Item No.1: Designing (aesthetically) and constructing R.C.C frame

structure of pump room with positive suction (up to 6 mtr. Height Plinth

level to Top slab beam bottom) with gantry structure

1. Minimum 15 % opening for ventilation shouldbe provided.

2. Pump room rolling shutter, door and windows

should be provided (Included in Cost).

3. Plinth level of Pump house should be min.1 meter above GL.

4.Cost does not include foundation for pumping

1) At Proposed Fofal Dam site HW for CW Sump

36 Mt X 12 Mt X 6 Mt Positive Suction with Gantry Structure 432.00 Sqm 15301.72

1.2 2) At Canal Intake over RW Sump

12 Mt X 8 Mt X 6 Mt with gantry Structure (Min.4.5 M) upto 6.0 M (Plinth

to top Slab beam bottom Turbine Suction 96.00 Sqm 15301.72

1.3 3) At Ujala SHW of Fofal 1-2 Scheme

15 Mt X 8 Mt X 6 Mt Positive Suction with Gantry Structure 120.00 Sqm 15301.72

Dy. Executive Engineer EXECUTIVE ENGINEER

P.H.S.Sub Division P. H. WORKS DIVISION

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Name of Work- Design, Build and Operate contract for Augumentation of Bhadara Regional Water Supply Scheme

Taluka- Jamkandorna,Jetpur Dist-Rajkot

Schedule:- B5 Compound Wall

Quantity UNIT Amount

Item Description (only (upto 50 ( Upto

(upto 200 ( Upto

figures) characters) Decimals )

characters) Decimals )

1 Item No.1: Construction of compound wall in B.B. Masonary in C.M. 1:6 with R.C.C. 620.00 RMT 6658.00

columns at 2.5 m c/c & R.C.C. Beam at G.L. ( Including reinforecement) with 20 mm

thick Cement plaster to all exposed concrete and masonary structure and 0.6 mt high

barbared wire fancing at 2.5 mt c/c on top of compound wall including excavation in all

strata, P.C.C., form work for R.C.C. work, plastering, colour washing and painting to

fencing and clearing the site etc. complete as per the detailed drawing attached.

1) At proposed Fofal Dam site HW-480 Rmt

2) At Ujala SHW of Fofal 1-2 Scheme-140 Rmt

2 Item No.2: Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and 2.00 Set 61973.00

diagonal braces of 40 x 40 x 6 mm angle iron, 3.15 mm M.S. gusset plates at Junctions

and corners 25 mm dia. pulley, 40 x 40 x 6mm angle and T-iron guide rail at top and

bottom respactively with handles, stoppers and locking agangement etc, including

applying a priming coat of red lead paint. and painting two coats (excluding priming

coat) on new steel and other metal surface with synthatic enamel paint, brushing to

give an even shade,including cleaning the surface of all dirt, dust and other foreign

matter.for compound wall of required size & specification as per the drawings with 3 No

of R.C.C. column size 0.45 x 0.45 m ( including reinforcement) with 20 mm thick

cement plaster to all exposed surface including excavation in all strata, P.C.C., form

work for R.C.C. work , painting to all Iron exposed surfaces( incl. brusing , cleaning &

priming coat ) and cleaning the site etc. the site etc. complete as per the detailed

drawing attached.

Dy. Executive Engineer EXECUTIVE ENGINEER

P.H.S.Sub Division P. H. WORKS DIVISION

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Name of Work- Design, Build and Operate contract for Augumentation of Bhadara Regional Water Supply Scheme

Taluka- Jamkandorna,Jetpur Dist-Rajkot

Schedule:- B6 Repairing of Existing ESR of 5.0 LL at Ujala SHW

Quantity UNIT Amount

Item Description (only (upto 50 ( Upto

(upto 200 ( Upto

figures) characters) Decimals )

characters) Decimals )

Demolition including stacking of serviceable aterilas and disposal of unserviceable

materials with all lead and lift. (i) R.C.C. work For RCC Spiral Stair case 3.60 Cum 1020.6

2 Item No-2 RCC Spiral Staircase

RCC circular spiral staircase with central circular in M-20 as per design including M.S.

reinforcement, centering, shuttering, form work , scaffolding ,finishing and curing

including providing and fixing balusters of 1.0 m (work below G.L. for column and footing

will be paid extra) for 1m radius and 20 cms rise .For Approx 20 Mt staging ht+5 Mt

container Ht 125.00 Steps 1000

3 Item No-3 D.I. Specials

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees,

reducers or any other specials as per BS-EN-545/1995 Class-A series K12 suitable for

use with D.I. Pipes manufactured as per IS:8329/1994 delivery of specials is to be made

to GWSSB store or site of works any where in Gujarat including all taxes, loading,

unloading, carting, stacking, insurance, inspection charges, octroi etc. complete.Flanged

ended 80 to 300mm dia : 150 MM Duck Foot Bend 27.00 Kg 155

4 Item No-4 DIDF pipes for ESR / Reservoir

Providing and fixing flanged D.I.D.F. / Class K-9 pipes vertically for RCC. Reservoir incl.

providing clamps at every 3 mt incl. jointing materials such as nuts, bolts, rubber

packing, hydraulic testing and necessary scaffolding etc. complete. 150 MM Dia outlet

Pipe 26.00 Rmt 3421

5 Item No-5 M.S. Pipe Railing

Providing an fixing 25 mm x 5.2 mm MS railing with three horizontal rows and posts of

angle iron of size 65 mm x 65 mm x 8 mm RCC 150 mm and 1.15 meter height and

placed at 1.85 mt / c/c including painting two coats and anchorage in CC etc complete At

Roof of ESR 622.00 Kg 77

6 Item No-6 Gunniting exterior surface for Civil Structures only

Gunniting the surface in CM 1:2 having thickness of 40 mm to 50 mm (Ave.) for beam,

braces, column and container slab incl. chiselling and scraping loose concrete cleaning

the surface with water and air under pressure and including providing and fixing in

position steel wires square mesh 75 mm x 75 mm as per IS:1966-1982 3.15 mm

Wt/Sq.Mt. 1.64 Kg. with spot welding wherever necessary with main reinforcement incl.

tying binding with wire incl. scaffolding centering staging all equipment and materials etc.

complete incl. labour and testing of the container. At Outside of ESR Container 248.00 Sqm 594.64

Volume-III, PRICE BID AUG. OF Bhadara RWSS

7 Item No-7 Cement Paint to ESR

Applying any approve quality of cement paint in three coats including cleaning washing

etc. complete for E.S.R. only.

-do- for Existing ESR Incl. Scaffolding At Outside Surface of ESR 688.00 Sqm 79

8 Item No-8 Copper Lightning Arrestor

Providing and fixing copper lightning arrestor incl. copper strip and earthing plate etc.

complete (incl. cost of excavation for earthing plate etc. rate per kgs of copper). For ESR 42.00 Kg 787

9 Item No-9 Water Level Indicator / Depth Gauge

Providing and fixing Water Level Indicator or depth gauge painted on TW plank 25 mm /

MS plate 4 mm thick float, level indicator sliding wire on standard pulleys incl. necessary

arrangement to prevent the swinging etc. complete with calibration up to 5 mt height.For

ESR 1.00 No 5520

10 Item No: 10 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and

diagonal braces of 40 x 40 x 6 mm angle iron, 3.15 mm M.S. gusset plates at Junctions

and corners 25 mm dia. pulley, 40 x 40 x 6mm angle and T-iron guide rail at top and

bottom respactively with handles, stoppers and locking agangement etc, including

applying a priming coat of red lead paint.For ESR 2.70 Sqm 3652.12

11 Item No.11 Painting letters

Painting letters for "Capacity of tank" the size of letters will be 45 cm height and 50 mm

width. Painting letters 45 Cm Ht. 19.00 No 34

12 Item No: 12 M.S. Ladder(Without safety cage)

Providing and fixing 50 cm wide M.S. Ladder fabricated from M.S. Flats 10 mm x 75 mm

with 20 mm dia steel bar steps in double rows, @ 30 cm C/C. The include stays of

mm x 50 mm flats fixed at 3 meter C/C with welding anchoring and 3 coats anticorrosive

paint. Inside Container of ESR 7.00 Rmt 2950

13 Item No 13 P.C.C. M-10 levelling Course

Providing and casting in situ mass cement concrete in grade M-10 (approx. corresp. to

prop. 1:3:6) using granite quartzite trap metal of size 12 mm to 25 mm incl.consolidation

curing etc. complete.

Without Forms Work 23.00 Cum 3662

Dy. Executive Engineer EXECUTIVE ENGINEER

P.H.S.Sub Division P. H. WORKS DIVISION

Volume-III, PRICE BID AUG. OF Bhadara RWSS

MECHANICAL SECTION

SCHEDULE-B7.1 to B7.2

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Name of Work- Design, Build and Operate contract for Augumentation of Bhadara Regional Water Supply Scheme

Taluka- Jamkandorna,Jetpur Dist-Rajkot

Schedule:- B7.1 Pumping Machinery for Canal Intake Head Work Site

Duty Point : (1) Canal Intake HW : Proposed Canal Intake to proposed Dam site WTP HW - 250M3/Hr, 16 Mtr. Head & 18.5 kW (2 Working +

Stand By) - 04 Sets

Quantity UNIT Rate Amount

Item Description (only (upto 50 ( Upto 2 ( Upto

figures) characters) Decimals Decimals )

(A) MECHANICAL ITEMS:

VERTICAL TURBINE PUMPSET: Supply, installation,Testing &

Commissioning of Vertical Turbine pump motor set of specified duty

parameters & guaranteed efficiency of following MOC with specified capacity

horizontal flange mounted TEFC squirrel cage induction motor, working on

three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450/1000

RPM along with column and bowl assembly, discharge head, base

channel/RSJ etc. complete as per relevant IS.M.O.C.: Impeller & Sealing

Rings: CF8M, Bowl & Suction Bell: Cast Steel WCB , Shaft with coupling: SS

410, Column Pipe: M.S. Mechanical Seal (above 30kW),ERW, , Base Plate:

MS, Line Bearing: Thordon type, Suction Strainer: S.S.As per detail

specification as per Site Requirements. Minimum Motor rating: 18.5 KW,

Capacity:250 m3/hr, Head:16 mtrs Efficiency: 83% (2W+2S) (Per KW

DPCV: Supply, installation, painting, testing & commissioning of non-slam,

spring action, flanged Dual plate check valve confirming to API 594 & 598 PN

2.0 1.6 with C.I. body, spring steel spring, S.S. seating with all carbon steel 4 NOS 13742.00

hardware’s and other accessories as per data sheet and specification. Size:200

mm NB PN-1.0 Rating -Manually operated (on delivery side)

2.1 Size:400 mm NB PN-1.0 Rating -Manually operated (on header side) 1 NOS 96311.00

EXPANSION BELLOWS:Supply, installation, testing and commissioning of

flanged metallic S.S. expansion bellows confirming to EJMA standard with PN

1.0 rating & all necessary carbon steel hardware’s as per data sheet.

Size: 200 mm NB- (on Delivery Side)

3.1 Size: 400 mm NB- (on Header Side valve and for Flow Meter) 2 NOS 16500.00

BUTTERFLY VALVE:Supply, installation, testing & commissioning of double

flanged Cast iron Butterfly valve on delivery line of pumps as per IS 13095 of of

Volume-III, PRICE BID AUG. OF Bhadara RWSS

PN 1.0 Size: 200 mm NB-Manually operated (on delivery)

4.1 Size: 400 mm NB-Manually operated (on header) 1 NOS 33775.00

AIR VALVE: SITC of CI Tempor proof Flanged double acting kinetic Air Valve

with Isolation Sluice Valve as per IS 14845 PN-1.6 &IS-14846 PN-1.0

respectively with SS304 float, gun metal nozzle, complete hardware's, bolts,

5.0 nuts & washers, gaskets etc. including all taxes, Insurance, Transportation, 1 NO 16758.00

freight charges, Inspection charges, loading, unloading, conveyance to

departmental stores, stacking, security etc. as per IS and Specification. Size:

100 mm NB - PN 1.0 (on Header line outside the Pump house)

M.S. PIPE : Manufacture, Supply & Delivery of Electric Resistance Welded (Up

to 400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe having beveled

ends plate or coil conforming to IS-3589-2001 or its latest revision/

ammendment for following thickness outside diameter at GWSSB store or site

anywhere in Gujarat State including all taxes, insurance,transportation, freight

charges, octroi, inspection charges, loading, unloading conveyance to

Departmental stores,stacking etc. all complete.Size: 200 mm NB-6.3 mm thick

(on Delivery side)-As per site requirement

6.1 Size: 400 mm NB-6.3 mm thick (on Header side)-As per site requirement 18 MTR 5306.00

Supply, installation, testing and commissioning of MS fabricated specials with

both side flanges like Blind flange, Elbow, Eccentric/Cocentric tapers, bends, Y

7.0 Joints, Flanges, ductfoot bend, Puddle pipe, Bell mouth, Tee joint, Reducers, 430.00 KG 98.00

Nut-Bolt, Gaskets Etc of required size & in required quantities as per relevant

IS for dilevery & suction line.

E.O.T CRANE: Providing & erecting Single girder type fully electrically

operated E.O.T. crane with electrically operated hoist, class II duty, geared

travelling trolley with seven meter lift complete with long travel rail track (40 mm

sq. bar), moving or cross girder, all three motions electrically operated by

suitable rating motor IP 54, control panel & down pendant control block, brake,

safety device, cables form motor to starter panel & other required accessories

& tested as per IS Specifications. Capacity:2 Ton,span,long traveling and lift as

per site requirement (Span- 9.0Mtr X 12Mtr., Long Travel -12 Mtr., )

PRESSURE GAUGE: Design, Supply, Installation, Testing, Commissioning of

Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M)

process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type

9.0 Bezel, SS316 L Bourdon Tube, SS316 Movement material, Aluminium dial with 5 NOS 1412.00

black graduation on white background, Micro Zero adjustable pointer, neoprene

gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS 3624. (VT

Pump delivery & header). Range : 0 - 20 kg/sq.cm.and 150 mm dia

Volume-III, PRICE BID AUG. OF Bhadara RWSS

FLOW METER (PN - 1.6): Supply, Installation, Testing, Commissioning of Full

Bore Electromagnetic flow meter with factory calibrated, Regular Power

Operated, flanged connection, Flow sensor, Indicator, transmitter and totaliser

with all accessories viz. surge arrestor, associated cables, cabinets, hardwares,

etc complete as per following specifications:

Flow Meter/ Sensor: DC pulsed type, IP 68 Protection, Flanged process

connection as per IS 1538 or equivalent standard, SS304/ Metallic Alloy Flow

Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/

Inbuilt Grounding Electrode, Neoprene/ Polyurethane/ Hard Rubber/ Rilsan

lining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil

Housing with Junction Box, CS flanges.

Flow Transmitter/ Converter ( Remote Field Mounted): Microprocessor

based, Modular design, 2 line LCD for indication of actual flow rate, forward,

reverse, sum totaliser display, ±0.5% accuracy at 0.3 to 4 m/sec velocity, 4 to

20 mA with HART/Modbus output, one scalable pulse, one status output, IP

protection, Die cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/

PU finish with glass window enclosure, Inbuilt EEPROM and Data Logger,

meters cable length for sensor to transmitter communication etc. alongwith wall

mounted/ stand mounted cabinet.

The Scope also include make cable trench, provide and laying power and

signal cable of type as specified in tender and of required length between

Instrument / transmitter and PLC Panel and double compression weather proof

Ni-Brass cable glands and termination of all applicable cable at instrument side

and panel side. and shall have following size. Meter Size :400 mm (At header)

Providing, erecting, fabricating the MS structure as per requirement on site

incorporating proper size of MS angels, flats, bars, channels, section complete

with cutting, welding, grinding and finishing duly painted with one coat of red

oxide with erection on site as per direction of engineer incharge with necessary

11.0 grouting, cementing, plastering and finishing completed. to prevent the entry of 100.00 Kg. 107.80

birds and proper vantilation in pump house for door.& Window the design and

drawings of the gate shall be approved by the engineer in charge prior to

purchase and manufacturing of the gate. For support of Chequered plate with C-

Section MS Channel.

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Breaking, Cutting of Existing Thrust Block / Pump Foundation / Piping and

Removing the Same outside the pump House and Removing the same outside

the pump room and disposing/stacking of material outside pump house as per

instruction of engineer in charge including providing of necessary machinery

equipments for the work. RCC/Brick Retaining Walls, Incerting the Pudder

Pipes, Common Header Pipes Out Side the Pump House breaking Of Existing

motor Pump Foundation Required with breaking cutting tools machinery

acessories and Refilling the Wall Opening by Cement Concrete, Quick Setting

Cement, Water Proofing Chemicals etc. and Making the Water Proof Joints as

per Site Requirement.

Providing & laying reinforced cement concrete in Thrust Block/Pipe/Valves

Supports etc. with tar steel black trap kapchi as coarse aggregate for raft,

grillage footing inclusive providing binding necessary size TMT steel bar with 2 Cu. Mtr. 8566.00

centering form work, with Foam work by adding Tar Steel, bara 50 Kg. CuM

for all duty point.

Supplying & fixing Steel Chequered Plate having 10 mm thickness, duly painted

with two coats of black Japan colour. (Average Wt. 84.6 kg/ Sq.Mtr.) for fabrication of

Ladder and walkway over common header pipe for approaching to pumping

machinaries for operation and maintenance purposes.

Dismentaling and transportation of Pump Motor Set with all valves, Suction,

Delivry header Pipes, Panels, cables, and other misc. acceessories as per

14.0 instruction of Incharge engineer from intake well HW to Rajkot Departmental 1.00 Job 26945.94

store including loading, transporatation,unloading etc including provoding

bracker, gas cutter, labour, hydra crane etc complete.as per Rate analysis

1.0 (B) ELECRICAL ITEMS :

MCCB BOX :Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 50 KA. at 415 V. having normal

current rating 200A. with Fixed Microprocessor release suitable to work on

A.C.supply 50 c/s. with all internal connections & complete erected in New

G.M.S. housing. 200 A Cat III

Volume-III, PRICE BID AUG. OF Bhadara RWSS

2.0 LV MCC PANEL BOARD: S.I.T.C of LV MCC Panel totally enclosed, dust & bermin

proof, indoor type, minimum degree of protection - IP 52 as per IS: 2147, operation on

3- Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with instrumentation

compartments accomodating LED type indicating lamps, control contactors as per IS:

13947, CT of accuracy class- I as per IS: 2705, relays, meters & control MCBs, air

insulated electrolitic grade Aluminum busbar for three phase & neutral system with

incomming microprocessor based air break fixed type MCCB with trip free mechanism,

current limiting type as per IS: 8828, Motor Contractor (as per type -2 coordination),

Overload Relay with built-in single phasing prevention feature & auxiliary feeders as

per SLD drawings, momentary contact type push buttons, equipment fittings, bus bars,

cable boxes, cable gland, incoming & ougoing cable connection for 1100V grade,

Aluminium/ Copper conductor XLPE/ PVC insulated & PVC sheathed armoured cable,

10% spare terminals, power wiring using 1100V grade, FRLS insulated copper

conductor wires conforming to IS: 694 & 8130, cable compartments/ alleys of minimum

300 mm size, GI earth bus bar for entire length. MCC shall be fabricated from cold 1 Set 147588.35

rolled, coled annealed (CRCA) sheet steel & minimum thickness of various members

shall be as follows: Base Frame/ Channel/ Gland Plate - 3 mm, Load Bearing

Members/ Doors - 2 mm and Internal Partitions - 1.6 mm. complete in all respects as

per SLD, Specification, IS.

1 Nos. 200 A, FP, 35 KA, Microprocessor based MCCB

Out Going Feeder

4 nos. 63A ,TP, 25 KA, MCCB 18.5 KW (2W+2S) Auto Transformer Starter with

MCCB, Contactor, O/L relay, cast resin type CT, Digital MFM, Analogue Ammeter,

SPP, Timer etc.

2 nos 32A MCB TP for Lighting & spare,

1 no. 40A MCB TP for EOT.

10 KVAR X 4 Nos. Panel = 40 KVAR APP Type Capacitor with control MCB rated

for rated for 440 V AC, 3 Phase, 50 Hz as per IS: 13585 Part-1.

3.0 Lighting Distribution Board (LDB) as under: Providing and erecting Sheet

Steel powder coated MCB distribution board - flush / surface mounted fitted

with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used) suitable for Three phase 1 NOS 5769.00

incoming and single phase horizontal type outgoing Per phase isolation type

(PPI) single door 6 way Prewired Lighting Distribution Board Suitable to house :

Incoming: 25A FP, ELMCB (30mA), Cat-III Outgoing: 20A SP MCB (6 nos.),

16A SP MCB (6 nos.)

Volume-III, PRICE BID AUG. OF Bhadara RWSS

4.0 MEDIUM VOLTAGE CABLES: Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat

strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty

cable (to be laid on wall surface with necessary clamps / in existing cable

trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site

requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following

sizes:2 Run 3.5 c X 50 Sq.mmAL XLPE Armoured (For Incomer to MCCB

4.1 3 c X 16 Sq.mm AL XLPE Armoured cable (For 18.5 KW Motors) 60 MTR 91.00

4.2 4 c X 4 Sq.mm Cu XLPE Armoured (For EOT, LDB) 50 MTR 141.00

5.0 CABLE END TERMINATION AND CONNECTION : Providing & fitting heavy

duty brass cable glands (nickel-plated) with washers & rubber ring conforming

to IS, suitable for 3, 3½ & 4 core cables of following type & sizes:Double 4 NOS 240.00

Compression Brass Cable Glands 3.5 c X 50 Sq.mmAL XLPE Armoured

((For Incomer to MCCB BOX to Panel).

5.1 3 c X 16 Sq.mm AL XLPE Armoured cable (For 18.5 KW Motors) 8 Nos 154.00

5.2 4 c X 4 Sq.mm Cu XLPE Armoured (For EOT, LDB) 4 NOS 107.00

6.0 CABLE LUGS Providing & fitting crimping type Cable Terminals (Lugs)

conforming to IS of following types and sizes

Aluminium Tubular Terminals (in Sq.mm.) 3.5 c X 50 Sq.mmAL XLPE

Armoured (For Incomer to MCCB BOX to Panel).

6.1 3 c X 16 Sq.mm AL XLPE Armoured cable (For 18.5 KW Motors) 24 Nos 2.00

6.2 4 c X 4 Sq.mm Cu XLPE Armoured (For EOT, LDB) 16 NOS 7.00

7.0 Maintenance free Chemical Earthing: Supplying & erecting earth pit of

minimum bore dia.150mm size approved make Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.(approved make OEM 2 Nos 4546.00

has to submit test certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 W/ meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted. For Electrical

installation up to 440V in normal soil. Length of Pipe : 1.00 mtrs Back filling

Compound :1 no. Bag of 15 Kg..(1 Nos. for LT panel, 1 Nos. for Motor)

Volume-III, PRICE BID AUG. OF Bhadara RWSS

7.1 G.I. Earth Strip: Supply, laying and erection of 50mm(w) x 6mm(T) etc. sizes

as required, HOT deep GI Strip including supply & fixing using GI spacers,

saddles when laid inside the building and inclusive of excavation & refilling of

earth when laid outside the building & interconnection with earth pit & all

electro-mechanical equipments. (for panel) (25X6 G.I Strip, 2.4 Kg/m,

8.0 INTERNAL WIRING:- Mains with 1.1kV grade FRLS PVC insulated ISI marked

stranded copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ ceiling with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following

size.with medium class Rigid PVC pipe and accessories Main wiring with 3 wire

8.1 Supply,Installation,Testing and Commissioning of Main wiring with 3 wire

sq. mm as per tender specification / IS

8.2 Point wiring for Light/ Bell with 2-1.5 sq. mm & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1kV grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in/ on surface on wall/

ceiling complete with 6A Modular type switch/ bell push & accessories and

earth continuity of following type, erected on PVC/ Metallic box, single 8 NOS 445.00

mounting base frame covered with textured/ metallic front plate modules

erected on/ in wall/ ceiling as per pipe erected, with necessary Lamp holder/

ceiling rose/ H.D.Connector as directed. with medium class Rigid PVC pipe and

accessories-cat.III

8.3 Point wiring for Individual Plug with earthwire of 1.5 sq.mm (Green) both are of

ISI marked 1.1kV grade FRLS PVC insulated multistrand copper wires, in

following type of to be erected concealed in/ on surface of wall/ ceiling

complete with Modular type switch & 5 pin Plug erected on PVC/ Metallic box 2 NOS 471.00

covered with appropriate front plate modules erected on/ in wall/ ceiling as per

pipe erected with following type of accessories.For 6A Plug with 2-1.5 sq.mm

Cu. Wire with medium class Rigid PVC pipe and accessories.

8.4 Point wiring for Individual Plug with earthwire of 1.5 sq.mm (Green) both are of

ISI marked 1.1kV grade FRLS PVC insulated multistrand copper wires, in

following type of to be erected concealed in/ on surface of wall/ ceiling

complete with Modular type switch & 5 pin Plug erected on PVC/ Metallic box 2 NOS 704.00

covered with appropriate front plate modules erected on/ in wall/ ceiling as per

pipe erected with following type of accessories.For 16A Plug with 2-2.5 sq.mm

Cu. Wire with medium class Rigid PVC pipe and accessories.

Volume-III, PRICE BID AUG. OF Bhadara RWSS

9.0 LED LIGHT FIXTURES: Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion

resistance with diffuser with company mark/name 120 to 300 V,Power Factor

more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt ,LED efficiency-110 lumens/watt LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED

used for luminaire. ( fitting required LM-79 & LM-80 Certificates) Tube Light

with integral/ nonintegral driver 22-24 Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

9.1 Providing and erecting Approved make Ceiling fan with double ball bearing ISI

mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy

erected on existing hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

9.2 EXTERNAL LIGHTING: Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 1Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed 120 to 300 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.CREE /

OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED

used for luminaire. ( fittings required LM-79 & LM-80 certificates) Flood Light

(IP-65), Surge -4KV,Light must have 440VAC line supply protection. It should

withstand 48 hours for 440VAC line supply. above 60 to 90 Watts, Cat-III

9.3 BRAKET: B' class galvanised iron pipe 32 mm outside dia 45 cms long duly

welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, erected on wall or

corner for mounting luminaire with necessary hardware materials duly painted.

For wall mounting indoor & Outdoor Flood light Fixtures on wall of Buiding.

10.0 SAFETY ACCESSORIES: Supplying & erecting ABC powder type 'Ceasefire'

type Fire extinguisher as per IS 13849 or 1 Kg capacity with necessary clamp 2 NOS 840.00

for erection on wall. (for 2no. LT Room)

10.1 Supplying stand first AID box with antiseptic cream, medicine for use on

wounds due burn, crepe bandage, gauge bandage, medicated ready to use

bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic 2 NOS 297.00

solution (savlon or similar) etc. (All above contents shall be of standard makes)

(For Pump house / LT Room)

Volume-III, PRICE BID AUG. OF Bhadara RWSS

10.2 Providing printed instruction Chart both in English and Gujarati and duly framed

with front glasses, for treatment of person suffering from electric shock. (1no. 1 NOS 129.00

10.3 Supplying 4 mm rubber matting of following thickness as per IS:15652/IEC

4 Sq.Mtr 1017.00

61111 (for LT Panel)

10.4 Supplying & erecting FIRE bucket round bottom of 9 lit. capacity made out of

24 gauge GI sheet with extra handle at bottom duly painted white inside & red

out side with fire mark filled with dry sand & kept on exsisting stand provided or

hund on wall hook

10.5 Suppying & erecting floor mounting stand for keeping 4 nos of fire buckets

comprising 1500 mm in length & 900 mm height made out of

30mmX30mmX4mm angle iron with cross supports for lags welded with 4 1 Each 933.00

hooks & duly painted with one coat of red lead & two coats of approved

enammeled silver paint

10.6 Supply of pair of rubber Hand gloves suitable for working on 11/22 kV power

10.7 Supplu of Steel Cup board 3 selves - 20 Gauge . Size - 50 X 30 X 18 as per

Instruction of Engineer Incharge.

10.8 Supply of Steel Table 3 Door -18 Gauge. Size-48 X 24 X 30 as per Instruction

of Engineer Incharge.

10.9 Supply of Steel Perforated Chair powdercoated -16 Gauge. Standard size as

per Instruction of Engineer Incharge.

10.1 Providing and erecting metallic vitrified danger notice board as per language

suggested by engineer incharge for MEDIUM VOLTAGE installation to be 4.00 Each 80.00

erected as per IS-2551.

10.1 Providing & Erecting 3mm thick Polycarbonate (PC) sheet for Painting and

lettering of Name of RWSS, Name of H.W./S.H.W., Pump type, Discharge,

Head, KW/HP,No. of pump set. Year of installation etc. as per instruction of 2000.00 Sq. Inch 3.00

Engineer In-charge on pvc display board of various size as per Sq. Inch. , and

Fixing of the same on wall with necessary fixture. Size- 24' x 18' / 12' x 12'

10.1 Supplying & erecting approved make Digital time switch having lithium cell

years operative and operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD display. Also 1 Each 3137.00

comprise dpermanent ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover erected as required with

necessary connection erected as directed.

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Name of Work- Design, Build and Operate contract for Augumentation of Bhadara Regional Water Supply Scheme

Taluka- Jamkandorna,Jetpur Dist-Rajkot

Schedule:- B7.2 Pumping Machinery for Dam site WTP Head Work

Duty Point : (1) Fofal Dam HW to Ext HGLR near Mota Bhadra - 12 LPS, 88 Mtr. Head & 22 kW (2 Working + 2 Stand By) - 04 Sets

(2) Fofal Dam HW to Ext ESR near Dudhivadar - 14 LPS, 60 Mtr. Head & 18.5 kW (2 Working + 2 Stand By) - 04 Sets

(3) Fofal Dam HW to Ext Sump at Kapeldhar HW of Fofal-1-2 - 56 LPS, 74 Mtr. Head & 75 kW (2 Working + 2 Stand By) - 04 Sets

(4) Fofal Dam HW to connecting point of Ext pipeline of Lunivav village- SM Cat, 440 LPM, 52 Mtr. Head & 15 HP (1 W +1 SB)- 2 Sets

Head Work : Fofal Proposed HW

Quantity UNIT Rate Amount

Item Description (only (upto 50 ( Upto 2 ( Upto

figures) characters) Decimals Decimals )

(A) MECHANICAL EQUIPMENTS SECTION

Supply, installation, testing & commissioning of Horizontal Split Casing Centrifugal

Pump / Horizontal Multistage Pump Motor set of specified duty parameters &

guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted

TEFC squirrel cage induction motor (with minimum IE-3 efficiency class), working on

three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along

with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per

M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB , Shaft: SS

Shaft Sleeve: SS 410, Mechanical Seal (Above 30 kW), Base Frame: MS.

Duty Parameter: 12 LPS, 88 Mtr. Head & 22 kW, Min. Efficiency: 58%, Pump kW

(12x88/102/0.58= 17.84 KW x 1.15 Margin = 20.52 kW - Next Manu. Range Selected

- 22 kW) (Fofan Dam HW to Ext HGLR near Mota Bhadra)

Duty Parameter: 14 LPS, 60 Mtr. Head & 18.5 kW, Min. Efficiency: 60%, Pump kW

1.2 (14x60/102/0.6= 13.72 KW x 1.2 Margin = 16.47 kW - Next Manu. Range Selected - 4 Set 174933.00

18.5 kW) - (Fofan Dam HW to Ext ESR near Dudhivadar)

Duty Parameter: 56 LPS, 74 Mtr. Head & 75 kW, Min. Efficiency: 75%, Pump kW

1.3 (56x74/102/0.75= 54.16 KW x 1.15 Margin = 62.29 kW - Next Manu. Range Selected 4 Set 627950.00

- 75 kW) - (Fofan Dam HW to Ext Sump at Kapeldhar HW of Fofal-1-2)

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Monoset sub. pump 3 phase 400/440 vott, 50 c/s. A.C. Supply & 2900 RPM , as per

MOC : Casing: CI-FG260, Impeller : Bronze & Shaft : SS:41 & Lowering of openwell

1.4 Horizontal Submersible pump sets/bore well pump sets in Well/Sump with HDPE 2 No. 26143.00

pipe/GI/MS column pipe by means of chain pulley block/fixture & jointing the cable with

fuse unit / Control panel board including fitting accessories & making it in working

condition including satisfactory testing. SM - (440 LPM x 52 Mtr x 15 HP) (1 W + 1 S)

M.S. PIPE :Manufacture, Supply & Delivery of Electric Resistance Welded (Up to

400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe having beveled ends plate

or coil conforming to IS-3589-2001 or its latest revision/ ammendment for following

thickness outside diameter at GWSSB store or site anywhere in Gujarat State including

all taxes, insurance,transportation, freight charges, octroi, inspection charges, loading, 54 Mtr 980.66

unloading conveyance to Departmental stores,stacking etc. all complete. Size: 100 mm

NB-4.0 mm thick (on Suction side and Delivery Side - Fofan Dam HW to Ext HGLR

near Mota Bhadra and Fofan Dam HW to Ext ESR near Dudhivadar section , fofal

WTP to Lunagara)-As per site requirement

……Do……..Size: 200 mm NB-4.0 mm thick (on Header side - Fofan Dam HW to

Ext HGLR near Mota Bhadra and Fofan Dam HW to Ext ESR near Dudhivadar

section And on Suction side and Delivery Side Fofan Dam HW to Ext Sump at

Kapeldhar HW of Fofal-1-2)-As per site requirement

Size: 400 mm NB-6.3 mm thick (on Header side Fofan Dam HW to Ext Sump at

Kapeldhar HW of Fofal-1-2 )-As per site requirement 36 Mtr 5306.00

Size: 600 mm NB-6.3 mm thick (on Common Suction Header side )-As per site

Size: 250 mm NB-5.0 mm thick (on Sump to Common Suction Header side for

Mota Bhadra and Dudhivadar HW )-As per site requirement 8 Mtr 2884.00

Size: 500 mm NB-6.3 mm thick (on Sump to Common Suction Header side for for

Kapeldhar HW )-As per site requirement 4 Mtr 6637.00

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Supply, installation, testing and commissioning of MS fabricated specials with both side

flanges like Blind flange, Elbow, Eccentric/Cocentric tapers, bends, Y Joints, Flanges,

ductfoot bend, Tee joint, Reducers, Nut-Bolt, Gaskets Etc of required size & in required

quantities as per relevant IS for dilevery, common header & suction line.

1. Suction Side: 100 mm dia., Delivery Side: 100 mm dia. & Header Side: 200 mm

dia. - (Fofan Dam HW to Ext HGLR near Mota Bhadra)

2. Suction Side: 100 mm dia., Delivery Side: 100 mm dia. & Header Side: 200 mm

dia. - (Fofan Dam HW to Ext ESR near Dudhivadar)

3. Suction Side: 200 mm dia., Delivery Side: 200 mm dia. & Header Side: 400 mm

dia. - (Fofan Dam HW to Ext Sump at Kapeldhar HW of Fofal-1-2) And

4. Common Suction Pipe - 600 mm dia.

5. Individual Suction Pipe - 500 mm / 250 mm dia.

6. By-pass Pipe - 80 mm / 100 mm dia.

Supply, installation, testing & commissioning of double flanged cast iron 100 mm Dia.

Butterfly Valve as per IS

PN 1.6 rating to be installed on Delivery Side Pipe as per specifications. - (Fofan Dam

HW to Ext HGLR near Mota Bhadra)

Size: 200 mm Dia. PN - 1.6 - Header Side - (Fofan Dam HW to Ext HGLR near Mota

Size: 100 mm Dia. PN - 1.6 - Delivery Side - (Fofan Dam HW to Ext ESR near

Size: 200 mm Dia. PN - 1.6 - Header Side - (Fofan Dam HW to Ext ESR near

Size: 200 mm Dia. PN - 1.6 - Delivery Side - (Fofan Dam HW to Ext Sump at

Kapeldhar HW of Fofal-1-2)

Size: 400 mm Dia. PN - 1.6 - Header Side - (Fofan Dam HW to Ext Sump at

Kapeldhar HW of Fofal-1-2)

Supply, installation, painting, testing & commissioning of non-slam, spring action,

flanged 100 mm Dia. Dual Plate Check Valve confirming to API 594 & 598 with C.I.

body, spring steel spring, S.S. seating with all carbon steel hardware’s and other

accessories as per data sheet and specification. PN 1.6 rating to be installed on

Header Side Pipe as per specifications. - (Fofan Dam HW to Ext HGLR near Mota

Size: 200 mm Dia. PN - 1.6 - Header Side - (Fofan Dam HW to Ext HGLR near Mota

Size: 100 mm Dia. PN - 1.6 - Delivery Side - (Fofan Dam HW to Ext ESR near

4.4 Size: 200 mm Dia. PN - 1.6 - Header Side - (Fofan Dam HW to Ext ESR near 1 No. 15042.00

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Size: 200 mm Dia. PN - 1.6 - Delivery Side - (Fofan Dam HW to Ext Sump at

Kapeldhar HW of Fofal-1-2)

Size: 400 mm Dia. PN - 1.6 - Header Side - (Fofan Dam HW to Ext Sump at

Kapeldhar HW of Fofal-1-2)

SITC of ISI marked CI D/F refflux valve as per IS 5312 (Latest Ediation) of PN

Class and 80 mm Dia. Including all taxes insurance transportation, freight

5.1 charges, octroi, inspection charges, loading, unloading, conveyance to 2 No. 4346.00

departmental stores, stacking etc. complete. for Delivery Side of fofal WTP to

Lunagara Section.

Size: 100 mm Dia. PN - 1.0 - Common Delivery Header Side - (Fofan WTP to

Supply at site, storage,Erection, installation, testing & commissioning of ISI mark

mm Dia. CI D/F Sluice Valves PD type short body with hand wheel as per IS:14846

(Latest Edition) of following class and diameter including all taxes, insurance,

6.1 transportation, freight charges, octroi, inspection charges, loading, unloading, 4 Nos. 4037.00

conveyance to departmental stores, stacking etc. complete.PN 1.6 rating to be installed

on Suction Side Pipe as per specifications. - (Fofal Dam HW to Ext HGLR near Mota

Size: 100 mm Dia. CI D/F Sluice Valve - PN - 1.6 - Suction Side - (Fofan Dam HW to

6.2 Ext ESR near Dudhivadar) - 4 Nos. & 100 mm By-pass - 1 Nos. @ 5 Nos. 5 Nos. 4037.00

Size: 100 mm Dia. CI D/F Sluice Valve - PN - 1.0 Common Delivery Header Side -

(Fofal WTP to Lunagara)

Size: 200 mm Dia. CI D/F Sluice Valve - PN - 1.6 - Suction Side - (Fofal Dam HW to

6.3 Ext Sump at Kapeldhar HW of Fofal-1-2) 4 Nos. 11037.00

6.4 Size: 80 mm Dia. CI D/F Sluice Valve - PN - 1.6 - For By-pass Pipe 2 Nos. 3079.00

Size: 80 mm Dia. CI D/F Sluice Valve - PN - 1.0 - Delivery Side - (Fofal WTP to

Supply, installation, testing and commissioning of flanged metallic S.S. 100 mm Dia.

Expansion Bellows confirming to EJMA standard with all necessary carbon steel

hardware’s as per data sheet.

PN 1.6 rating to be installed on Suction Side Pipe as per specifications. - (Fofal Dam

HW to Ext HGLR near Mota Bhadra)

(Parallel Rates of Elec.Mech-GWSSB-SOR 2022-23, Sr. No.: 14.A Page No.: 39)

7.2 Size: 100 mm Dia. PN - 1.6 - Delivery Side - (Fofan Dam HW to Ext HGLR near

Size: 200 mm Dia. PN - 1.6 - Header Side+Flow Meter - (Fofan Dam HW to Ext

HGLR near Mota Bhadra)

Volume-III, PRICE BID AUG. OF Bhadara RWSS

7.4 Size: 100 mm Dia. PN - 1.6 - Suction Side - (Fofan Dam HW to Ext ESR near

Size: 100 mm Dia. PN - 1.6 - Delivery Side - (Fofan Dam HW to Ext ESR near

7.6 Size: 200 mm Dia. PN - 1.6 - Header Side+Flow Meter - (Fofan Dam HW to Ext ESR

near Dudhivadar)

Size: 200 mm Dia. PN - 1.6 - Suction Side - (Fofan Dam HW to Ext Sump at

Kapeldhar HW of Fofal-1-2)

7.8 Size: 200 mm Dia. PN - 1.6 - Delivery Side - (Fofan Dam HW to Ext Sump at

Kapeldhar HW of Fofal-1-2)

Size: 400 mm Dia. PN - 1.0 - Header Side+Flow Meter - (Fofan Dam HW to Ext

7.9 Sump at Kapeldhar HW of Fofal-1-2) 2 No. 17640.00

SITC of CI 50 mm Dia. Tempor Proof Flanged Air Valve with Isolation Sluice Valve

as per IS 14845 respectively with SS304 float, gun metal nozzle, complete hardware's,

bolts, nuts & washers, gaskets etc. including all taxes, Insurance, Transportation, freight

8.1 charges, Inspection charges, loading, unloading, conveyance to departmental stores, 1 No. 12766.00

stacking, security etc. as per IS and Specification. PN 1.6 rating to be installed on

Header line outside the Pump house as per specifications. - (Fofan Dam HW to Ext

HGLR near Mota Bhadra)

8.2 Size : 50 mm Dia., PN 1.6 rating (Fofan Dam HW to Ext ESR near Dudhivadar) 1 No. 12766.00

8.3 Size : 50 mm Dia., PN 1.0 rating (Fofan WTP to Lunagara) 1 No. 11600.00

Size : 100 mm Dia., PN 1.6 rating (Fofan Dam HW to Ext Sump at Kapeldhar HW of

Supply, installation, testing & commissioning single girder type fully electrically

operated EOT crane with electrically operated hoist, class II duty, geared travelling

trolley with seven meter lift complete with long travel rail track (40 mm sq. bar), moving

9.1 or cross girder, all three motions electrically operated by suitable rating motor IP 54, 1 No. 506250.00

control panel & down pendant control block, brake, safety device, cables form motor to

starter panel & other required accessories & tested as per IS Specifications. Range:

m - 12 m, Lift: 6 - 10 Meter, Long Travel = 12 meter Capacity: 3 TON

Design, Supply at site, storage, installation, testing & commissioning of Bourdon type

glycerin filled pressure gauge, +/- 1% accuracy, direct bottom 1/2" NPT(M) process

connection, IP 67, SS 304 case with Bayonet type Bazel, SS 316 L Bourdon Tube, SS

316 movement material, Aluminium dial with black gradution on white background,

10.0 micro zero adjustable pointer, neoprene gasket, blow out disk, shatter proof glass, SS 18 No. 1412.00

tag plate ets as per IS 3624 complete with siphon tube with isolating cock having range

of 0 to 20 Kg/cm2 (1.5 times rated head) 150 mm Ø dial - (Fofan Dam HW to Ext

HGLR near Mota Bhadra) , (Fofan Dam HW to Ext ESR near Dudhivadar) & (Fofan

Dam HW to Ext Sump at Kapeldhar HW of Fofal-1-2), (Fofal WTP to Lunagara)

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter

with factory calibrated, Regular Power Operated, flanged connection, Flow

sensorIndicator, transmitter and totaliser with all accessories viz. surge arrestor,

associated cables, cabinets, hardwares, etc complete as per following

specifications:Flow Meter/ Sensor:DC pulsed type, IP 68 Protection, Flanged process

connection as per IS 1538 or equivalent standard, SS304/ Metallic Alloy Flow Tube,

SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt

Grounding Electrode, Neoprene/ Polyurethane/ Hard Rubber/ Rilsan lining, SS304/ Die

11.0 Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing with Junction Box, 1 No. 116653.90

CS flanges.Flow Transmitter/ Converter ( Remote Field Mounted):Microprocessor

based, Modular design, 2 line LCD for indication of actual flow rate, forward, reverse,

sum totaliser display, ±0.5% accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with

HART/Modbus output, IP 67 protection, Die cast aluminium/ polycarbonate/ SS316 with

Anticorrosive Paint/ PU finish with glass window enclosure, Inbuilt EEPROM and Data

Logger, 30 meters cable length for sensor to transmitter communication etc.alongwith

wall mounted/ stand mounted cabinet.Meter Size: 200 mm PN - 1.6 - Header Side -

(Fofan Dam HW to Ext HGLR near Mota Bhadra)

Meter Size: 200 mm PN - 1.6 - Header Side - (Fofan Dam HW to Ext ESR near

Meter Size: 400 mm PN - 1.6 - Header Side - (Fofan Dam HW to Ext Sump at

Kapeldhar HW of Fofal-1-2)

Providing & laying reinforced cement concrete in Thrust Block/Pipe/Valves Supports

etc. with tar steel black trap kapchi as coarse aggregate for raft, grillage footing inclusive

12.0 providing binding necessary size TMT steel bar with centering form work, consolidating 20 Cu. Mtr. 8566.40

as per directive in 1:2:4 ratio. with Foam work by adding Tar Steel, bara 50 Kg. CuM

for all duty point.

13.0 Providing, erecting, fabricating the MS structure as per requirement on site incorporating

proper size of MS angels, flats, bars, channels, section complete with cutting, welding,

grinding and finishing duly painted with one coat of red oxide with erection on site as

per direction of engineer incharge with necessary grouting, cementing, plastering and 250.00 Kg. 107.80

finishing completed. to prevent the entry of birds and proper vantilation in pump house

for door.& Window the design and drawings of the gate shall be approved by the

engineer in charge prior to purchase and manufacturing of the gate.

14.0 Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with

shoring and struting if required as per required gradient and line including safety

provisions using site rails and stacking excavated stuff including up to all required lead

cleaning the site etc. complete for all lifts and strata as specified.

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Breaking, Cutting of Existing Thrust Block / Pump Foundation / Piping and Removing

the Same outside the pump House and Removing the same outside the pump room and

disposing/stacking of material outside pump house as per instruction of engineer in

charge including providing of necessary machinery equipments for the work. RCC/Brick

15.0 Retaining Walls, Incerting the Pudder Pipes, Common Header Pipes Out Side the Pump 5 Job 2460.00

House breaking Of Existing motor Pump Foundation Required with breaking cutting

tools machinery acessories and Refilling the Wall Opening by Cement Concrete, Quick

Setting Cement, Water Proofing Chemicals etc. and Making the Water Proof Joints as

per Site Requirement.

Vacumm Pump: Providing, Supplying, Erecting approved make coupled Vacumm

Pump Set (1W+1S) 7.5 HP with horizontal foot mounted TEFC squirrel cage motor

having under mentioned capacity working on three phase 50Hz , 415 V + 10% with base

16.0 plate, DOL starter, cable , GI medium duty suction pipes-10 mtr. long, specials, valves,

PVC tank of 250 litres capacity etc. complete.

MOC:Impeller-SS CF8M, Casing-CI FG260, Shaft-SS

18.0 Providing and supplying water hammer control device ISI mark Class 15 of 250 mm

dia. with cast iron body including all taxes, insurance, transportation,freight

charges,octroi,inspection charges, loading,unloading,conveyance to departmental

stores,stacking etc.Complete.

Zero Velocity valve with Bypass Arrangement upto 300 mm Dia. with CI Body Class

200 MM Dia for proposed WTP to Mota Bhadara Section - 1 Nos & proposed

WTP to Dudhivadar ESR - 1 Nos. @ 2 Nos.

19.0 Providing and supplying water hammer control device ISI mark Class 15 of 250 mm

dia. with cast iron body including all taxes, insurance, transportation,freight

charges,octroi,inspection charges, loading,unloading,conveyance to departmental

stores,stacking etc.Complete. 1.00 No 126335.00

Zero Velocity valve with Bypass Arrangement upto 300 mm Dia. with MS Body Class

400 MM Dia Rating for Pipardi to Gundasari HGLR - 1 Nos.

Providing and erecting Portable Diesel driven self priming Horizontal mono pump

set (Dewatering Set) with four wheel trolley, GI medium duty delivery pipes, Specials,

20.0 Suction Strainer etc. Complete set 12-30 LPS ,6-12 Mtrs Head, MOC: Impeller-

Bronze, Casing- C.I, Shaft-Carbon Steel

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Drain Pump / Dewatering Pump : Supply of horizontal mono submersible pump set

(Drain Pump) as per IS:14220/ 1994 & its latest ammendments of flow rate of 10 M3/

Hr @ 10 meters head with suitable submersible motor as per IS: 9283 / 1994 & its

21.0 latest ammendments working on with minimum with suitable submersible motor working 2 No. 15840.00

on 3 phase, 415 + - 10%, 50 + - 3% Hz power supply ,rated speed 2900 RPM of

following duty capacity, Material of Construction : Impeller- High TEnsile Brass / LTB II,

Casing: CI FG 260 , Pump & motor Shaft: SS 304; Bearing Bush - LTB complete.

(B) ELECTRICAL EQUIPMENTS SECTION

11 kV Two Pole Structure Assembly: SITC of 11 kV double pole 9 mtr. high structure made of

6" X 3" 'I" section girder, 4" X 2" channels, clamps, nuts, bolts, stay wires including earthing

system with following accessories duly connected with ACSR conductors as per approved

drawing & in compliance with requirement of IEC.

(a) 11 kV, 200 A drop out fuses with Synthetic Resin Bonded Paper (SRBP) tubes: 1 Set (01

piece per phase).

(b) 11 kV, 400 A G.O.D. switch complete with earth switch, insulators, operating handle with

galvanised pipe, square bar: 1 Set.

(c) 11 kV lightning arrestor with clamps: 3 Nos.

(d) 11 kV Disc Insulators (70KN): 3 Nos.

(e) 11 kV Pin Insulators (5KN): 3 Nos.

(f) 20 mm dia. GI. Stay Sets Complete: 2 Set.

Volume-III, PRICE BID AUG. OF Bhadara RWSS

HT INDOOR Switch Gear Panel:Supply, installation, testing & commissioning both side

extensible, Indoor type HV Switchgear panel confirming to IS-3427, IS-2516 (Part-I & II.sec.1 ) &

IEC-60056 & IEC-62271-100/200 for use on 3phase, 50 Hz, unearthed AC supply system and

having breaking/ ruptuing capacity of 500 MVA (26.3 kA for 3sec) complete with spring charged

mechanism, ON-OFF mechanical push button, operation counters, Breaker TNC switch, Breaker

L/R switch, necessary auxiliary switches, closing coil, shunt trip, protection relays & Indicators

etc., complete.The panel shall comprise of air insulated busbars provided with heat shrinkable

PVC sleeves. The VCB trolley shall comprise of three vacuum interrupters with epoxy support

insulators and self aligning finger type isolating contacts and necessary mechanical interlocks,

safety shutters, isolating plugs. Enclosure shall be openable from front as well as rear end.The

breaker shall be Manual cum motorised mechanism with following accessories.a) 96 x 96 mm

square flush mounting type Ammeter & Volt meter with selector switchesb) Multi function meterc)

2.0 Double core, cast resin type current transofrmer having ratio as per requirement, one core for 1 Nos. 994714.00

metering & one core for protection having required class of accuracy.d) Instantaneous under

voltage relay & Temperature rise tripping Relay,e) Triple pole IDMTL two over current and one

earth fault relay with current setting range 50-200% and 10-40%f) Electrical closing. coil & shunt

trip coil operating on 110 V DC.g) Auxiliary relay for anti pumping device. h) Three limb, drawout

type, feeder connected, cast resin insulated, three phase Potential transformer having ratio &

burden as per reqirement & Class 0.5 accuracy.i) Annunciator Windows, Common Hooter /

Alarm bell operating on 230 AC/ 110 V DCj) Cable boxes suitable to terminate 3 core XLPE

cable of required size (As per design).k) 230V A.C. to 110 V D.C.power pack for closing &

tripping circuit common.l) Breaker ON-OFF, Auto trip and spring charged indicators.m) Phase

indicating & panel illumination lamps with plug socket. n) Space Heater with Thermostat. -

Comprising of 800 A Vacuum circuit breaker for 1no. Incomer, 2no. O / G feeders for 11/0.433kV

distribution transformers

H.T. XLPE CABLES:Supply, laying, testing & commissioning 11 / 11 kV (UE) grade, XLPE

insulated, stranded Aluminium conductor, galvanised steel flat strip/ round wire armoured,

extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary

3.0 clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as 100 MTR 1445.00

per site requirement) conforming to IS:7098 (Part-2) & IEC:60502(Part-2), of following sizes:

3 core x 300 sq.mm, XLPE (UE) cable including all accessories,supports etc. as per relevant IS

and tender Specifications

Cable Terminations / Jointing Kits for 11 kV (UE) grade XLPE Cable: Supply & connection of

4.0 the Heat shrinkable type indoor H.T.cable end terminations Kit suitable for 11 KV, 3c x 300 4 NOS 6985.00

sq.mm.XLPE (UE) armoured cable along with Cable Glands.

Cable Terminations / Jointing Kits for 11 kV (UE) grade XLPE Cable: Supply & connection of

4.1 the Heat shrinkable type Outdoor H.T.cable end terminations Kit suitable for 11 KV, 3c x 300 1 NOS 11487.00

sq.mm.XLPE (UE) armoured cable along with Cable Glands.

Volume-III, PRICE BID AUG. OF Bhadara RWSS

DISTRIBUTION TRANSFORMER:SITC of outdoor type, three phase, oil immerged, distribution

transformer of required KVA & voltage ratio, copper double wound, vector group - Dyn11, HV

delta connected & LV star connected with neutral brought out connected to provide separate

earthing terminals, bushing / cable box on HV side and cable box on LV side suitable for cables

or bus duct as per requirement with standard fittings, conforming to IS: 1180 (Part-1) / 2014 with

its latest amendment including first fill of transformer oil & following accessories.(a) Oil

conservator with filling holes with cap and prismatic oil level gauge. (b) Silica Gel dehydrating

breather charged with silica gel (c) Oil drain cum sampling valve with plug (d) Oil filter valve (e)

Lifting Eyes / Hooks / Lugs (f) Two earthing terminal (g) Diagram and rating plate (h) Air release

plug (i) Explosion vent with diaphragm (j) Thermometer pocket (k) Four bi-directional plain roller

5.0 with base channel with hauling holes (l) Fixed / Separate type radiator banks (m) Off circuit 2 NOS 981864.00

externally operated tapping switch (For rating < 1000 kVA) (n) 100 mm stem type oil temperature

indicator (For rating < 500 kVA) (o) Bucholtz relay with shut off valve (For rating ≥ 500 KVA) (p)

150 mm dial type oil temperature indicator with Alarm / Trip contact (For rating ≥ 500 kVA) (q)

150 mm dial type winding temperature indicator with Alarm / Tip contact (For rating ≥ 1000 kVA)

(r) Marshalling box (For rating ≥ 500 kVA) (s) 150 mm dia. magnetic type oil gauge (For rating ≥

1600 kVA) (t) Inspection cover & Jacking lugs (For rating ≥ 1600 kVA) For transformer having oil

storage capacity for 2000 liters and higher, nitrogen injection fire protection system (NIFPS) is to

be provided. -With off circuit tap changer ± 10% in steps of 2.5%(11 / 0.433) kv, minimum

500 KVA plinth mounted ONAN outdoor type step-down transformer having Energy

Efficiency Level :-

Casting of transformer plinth / foundation including oil soak pit (where required) in situ reinforced

cement concrete in M 20 using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work

including providing of 53 grade cement & Fe 415 grade TMT bars, scaffolding, centering, form

work, curing, etc. complete.

RCC plinth / foundation for transformer of capacity:- 500 KVA.

Plinth Dimensions (L x W x H) = (1500x1500x1500)

Chain Link Fencing (For DP Structure & Transformer Yard):

Providing and fixing 2 meter high fencing with 2.0 meter long M.S angle posts 40 mm x

40 mm x 6 mm and oil painting three coats, fixed at 2.50 meter C/C with five horizontal

7.0 lines and two diagonals of galvanised stell barbed wire weighing 9.38 Kg / 100 Rmt, 80.00 Rmt 386.00

strained and fixed to posts with G.I staples, including fixing the posts in ground with

meter x 0.50 meter x 0.50 meter block in C.C 1:5:10 etc. complete including laying of

gravels of suitable size in switchyard.

M.S. Gate (For DP Structure & Transformer Yard):

Providing and fixing M.S. gate made from M.S. angles, channels and flats including all

labour and material cost with painting and fixing at site of work including carting,

loading, unloading etc. complete with M.S. Gate 1 Mtr. x 2 Mtr. in structural steel

Volume-III, PRICE BID AUG. OF Bhadara RWSS

LV POWER CONTROL CENTER (PCC)SITC of 800 A LV POWER CONTROL

CENTER (PCC) SITC of LV Distribution Board (LVDB) totally enclosed, dust & vermin

proof, indoor type, fabricated from CRCA sheet steel with minimum thickness of 3 mm

for base frame/ channel/ gland plates, 2.0 mm for load bearing members/ doors &

mm for internal partitions, minimum degree of protection - IP 52 as per IS:

suitable for operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded,

with instrumentation compartments accomodating meters, aux / protective relays, LED

type indicating lamps & control MCBs as per IS: 13947, current & voltage transformers

as per IS: 2705, air insulated electrolitic grade Aluminum/ Copper busbar for three

phase & neutral system, GI earth bus for entire length, power/ control wiring using

1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 &

equipment fittings, horizontally running busbar compartment height of minimum

mm, incoming & ougoing cable connections for 1100V grade, Aluminium/ Copper

conductor XLPE/ PVC insulated & PVC sheathed armoured cable. LVDB shall have

required incomming/ buscoupler/ outgoing modules of following type & ratings.(1)

Nos. of 800 A, 3 & 4 Pole, ACB (Draw-out Type) with Microprocessor release (O / C, S /

C & E / F) having breaking capacity Icu of 50 kA at 415V with 6NO+6NC potential feee

8.0 auxiliary contacts, secondary isolating contacts with all necessary Electro Mechanical 1.00 No 845746.00

protections & interlocks etc. ACB module shall have enclosure dimension: 2000 (H) x

800 (W) x 1000 (D) & following technical features. 4 pole, MDO with Microprocessor

Release (02 Nos. for Incomer 1 & Incomer 2 + 01 No. for Bus Coupler) Summation CT

shall be provided in Both Incomer for APFC Panel.

Outgoing feeders :- (1) 400 Amp. - 1 No (For 75 KW pump- Proposed WTP to

Kapeldhar HW) (2) 160 Amp. - 1 No (For 18.5 KW pump- Proposed WTP to Dudhivadar

ESR) (3) 160 Amp. - 1 No (For 22 KW pump- Proposed WTP to Mota Bhadra HGLR) (4)

400 Amp. - 1 No for APFCR panel(5) 250 Amp.- 1 No For Proposed WTP(6) 63 Amp -

4 No ( 2 No. For Fofal WTP to Lunagara, 1 No. Feeder for EOT & 1 No. Feeder for

Lighting Load) 4 Pole MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics = 100%

of Icu), Microprocessor release - conforms to IS/ IEC 60947-2 with trip free mechanism,

current limiting type with Microprocessor release (O / C, S / C & E / F) with adjustable

settings & having minimum 2NO+2NC potential free auxiliary contacts with all necessary

Electro-Mechanical protections & interlocks etc. MCCB module, when used as

Outgoing(s), shall have enclosure dimensions - Minimum 600 (D) 3P and 2P MCB shall

be provided for spare (3) No Load Compansation KVAR banks (APP type) 25 kVAR -

Nos. for approx. 5% kVAR of 500 kVA Transformer etc. for both incomer Complete.

Volume-III, PRICE BID AUG. OF Bhadara RWSS

MCC Panel with Microprocessor based soft Starter: 75 KW (1 Incomer and

Outgoing Feeder) Proposed WTP to Kapeldhar HW. Supply, installation, testing &

commissioning of . of LV MCC panel totally enclosed type as per IS : 2147, operation

on three phase,4 wire, 50Hz, neutral effectively grounded, IP 52, with instrument

compartments accomodating LED type indicating lamps, control contactors as per IS:

13947, CT of accuracy class I as per IS :2705, relays & control fuses, Air insulated Al

busbars for three phase & neutral system with Air circuit breakers, air break draw out

type MCCB with trip free mechanism, current limiting type MCB as per IS :

Digital type metering instruments - Smart Load Manager, momentary contact type push

buttons, equipment fittings, busbars, cable boxes, cable glands, incoming & outgoing

cable connection for sutable V grade, Al / Cu conductor PVC insulated & PVC sheathed,

armoured cable, 10% spare terminals, power wiring use of suitable V grade, FRLS

insulated copper conductor wires confirming to IS : 694 & 8130, Cable compartments of

minimum 300 mm size, GI earth busbar for entire length. with moisture sensor, thermal

over load protection, suitable KVAR APP type fixed capacitor bank for each outgoing

feeder with MCC shall be fabricated from cold rolled , coled base frame /channel /

Galnd This item also includes APP type suitable rating fixed capacitor bank for each

outgoing feeders. Indcluding hours meter. Encloser size Minimum 600 mm Depth

required (Height - 2175 mm)75 KW(1 Incomer and 4 Outgoing Feeder)

Microprocessor based Soft Starter with External by pass contactor, Semiconductor

Fuses, Harmonic Filters, cast resin type CT, Digital MFM, Analog Ammeter &

minimum 10 Channel Temperature Scanner with RS 485 communication port.-

No. Incomer and 03 Nos. of outgoing feeders suitable to 75 kW motor rating with

GI earth busbar for entire length of incomer

Volume-III, PRICE BID AUG. OF Bhadara RWSS

MCC Panel with ATS: 22 KW (1 Incomer and 4 Outgoing Feeder) Proposed WTP to Mota

Bhadara HGLR.SITC of LV MCC Panel totally enclosed, dust & bermin proof, indoor type,

minimum degree of protection - IP 52 as per IS: 2147, operationon 3-Phase, 4 Wire, 415V, 50Hz,

Neutral effectively grounded, with instrumentation compartments accomodating LED type

indicatinglamps, control contactors as per IS: 13947, CT of accuracy class- I as per IS:

relays, meters & control MCBs, air insulatedelectrolitic grade Aluminum bus bar for three phase

& neutral system with incomming breaker- microprocessor based Air CircuitBreakers

(electrically operated drawout type)/ air break fixed type MCCB with trip free mechanism,

current limiting type as per IS: 8828,Motor Contractor (as per type -2 coordination), Overload

Relay with built-in single phasing prevention feature & auxiliary feeders as perSLD drawings,

9.2 momentary contact type push buttons, equipment fittings, bus bars, cable boxes, cable gland, 1.0 Set 132517.00

incoming & ougoing cableconnection for 1100V grade, Aluminium/ Copper conductor XLPE /

PVC insulated & PVC sheathed armoured cable, 10% spare terminals,power wiring using 1100V

grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable

compartments / alleys ofminimum 300 mm size, GI / Al earth bus bar for entire length. MCC

shall be fabricated from cold rolled, coled annealed (CRCA) sheetsteel & minimum thickness of

various members shall be as follows:Base Frame / Channel / Gland Plate: 3 mm, Load Bearing

Members / Doors: 2 mm and Internal Partitions: 1.6 mm.Encloser size Minimum 600 mm Depth

required (Height - 2175 mm)22 KWAuto Transformer Starter with MCCB, Contactor, O/L

relay, cast resin type CT, Digital MFM, Analogue Ammeter, SPP, Timer etc. (1 Incomer

and 4 Outgoing Feeder)For Soft strater(22 KW (3W+2SB)

Volume-III, PRICE BID AUG. OF Bhadara RWSS

MCC Panel with ATS: 18.5 KW (1 Incomer and 4 Outgoing Feeder) Proposed WTP

to Dudhivadar ESR.SITC of LV MCC Panel totally enclosed, dust & bermin proof,

indoor type, minimum degree of protection - IP 52 as per IS: 2147, operationon 3-

Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with instrumentation

compartments accomodating LED type indicatinglamps, control contactors as per IS:

13947, CT of accuracy class- I as per IS: 2705, relays, meters & control MCBs, air

insulatedelectrolitic grade Aluminum bus bar for three phase & neutral system with

incomming breaker- microprocessor based Air CircuitBreakers (electrically operated

drawout type)/ air break fixed type MCCB with trip free mechanism, current limiting type

as per IS: 8828,Motor Contractor (as per type -2 coordination), Overload Relay with

built-in single phasing prevention feature & auxiliary feeders as perSLD drawings,

momentary contact type push buttons, equipment fittings, bus bars, cable boxes, cable

9.3 gland, incoming & ougoing cableconnection for 1100V grade, Aluminium/ Copper 1.0 Set 111434.75

conductor XLPE / PVC insulated & PVC sheathed armoured cable, 10% spare

terminals,power wiring using 1100V grade, FRLS insulated copper conductor wires

conforming to IS: 694 & 8130, cable compartments / alleys ofminimum 300 mm size, GI

/ Al earth bus bar for entire length. MCC shall be fabricated from cold rolled, coled

annealed (CRCA) sheetsteel & minimum thickness of various members shall be as

follows:Base Frame / Channel / Gland Plate: 3 mm, Load Bearing Members / Doors:

mm and Internal Partitions: 1.6 mm.Encloser size Minimum 600 mm Depth required

(Height - 2175 mm)18.5 KW Auto Transformer Starter with MCCB, Contactor, O/L

relay, cast resin type CT, Digital MFM, Analogue Ammeter, SPP, Timer etc. (1

Incomer and 4 Outgoing Feeder)For Soft strater(22 KW (3W+2SB) i.e. 1,59,209.00 -

Cubical Control Panel SITC of DOL/ Star delta Starter suitable for local & remote pump control

application consisting of MCCB/MPCB overload relay and contactors as per Type II coordination

10.1 including digital MFM with RS485 comunication port, analogue ammeter with selector switch, 2.0 No. 12230.90

run hour meter, required protective relays & control accessories. up to SD From11 to 15 HP as

per Detiled tech specification.(Fofal WTP to Lunagara)

Volume-III, PRICE BID AUG. OF Bhadara RWSS

APFCR panel: 130 KVAR: APFC panel consisting following items.

Supply, installaton, testing & commissioning LV APFC panel consisting of required capacitor

banks for continuous duty to improve P.F 0.85 to 0.99 in required steps enclosed in dust &

vermin proof compartment, indoor type, fabricated from CRCA sheet steel with minimum

thickness of 3 mm for base frame / channel / gland plates, 2.0 mm for load bearing members /

doors & 1.6 mm for internal partitions, minimum degree of protection - IP 42, busbar chamber,

required size of Al bus bar / terminals, minimum 10 stage APFC relay, metering, indicating

lamps, push buttons complete as per IS: 16636-2017 with latest ammendment & detailed

technical specification and data sheet as under.

a) 400 A, 50 kA for 1sec. TP, TM based MCCB with spreader terminals & rotary handle b) 0-400

A range analogue ammeter of 96 x 96 mm size with selector switch c) 3nos. 400 / 5A, 10 VA CL-

1.0 cast resin type current transformer d) Suitable rating of MCCB / MCB & Contractors for each

capacitor bank e) Suitable rating APP type capacitor banks (vacuum impregnated with non-PCB

/ non toxic oil, internally delta connected with built in internal fuses complete with discharge

resistances & terminal cover) of approved make in required steps with well suited detuned

reactor is placed in series with each capacitor step. (e.g. 130 KVAR capacity will be provided in

steps of 2 nos x 5 KVAR, 2 nos x 15KVAR, 1 nos x 30 KVAR & 1 nos x 50 KVAR) f) Enclosure

dimensions: 2100 (H) x 1250 (W) x 600 (D)

Lighting Distribution Board (LDB) as under: Providing and erecting Sheet Steel powder

coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for Three

phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) single

door 6 way Prewired Lighting Distribution Board Suitable to house :

Incoming: 25A FP, ELMCB (30mA), Cat-III Outgoing: 20A SP MCB (6 nos.), 16A SP MCB (6

Power Distribution Board (PDB) as under:

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush

/ surface mounted double door (IP54) fitted with copper insulated busbar, isolated neutral bar,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3, suitable for 63 AMP TPN

MCCB + RCCB as incomer and three phase outgoing as per following .(The DBs should be

used of same company of MCB to be used)

6 way outgoing , Power Distribution Board for Auxiliary accessories load power supply (For EOT

crane, Exaust fan, Welding recaptical & Sapre etc).

Incoming: 63A FP, MCB 'C' Curve Cat.iii

Outgoing: 8 nos. 32A FP MCB 'C' Curve Cat.iii

MEDIUM VOLTAGE CABLES: Supply, laying, testing & commissioning 1.1 kV grade, XLPE

insulated, stranded Aluminium conductor, galvanised steel flat strip / round wire armoured,

extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary

clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as

per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes:3

RUN 3.5 c x 240 sq.mm. AL XLPE Armoured (Transformer to MVDB panel)

2 Run 3.5 c x 150 sq.mm. AL XLPE Armoured (MVDB panel to 75 KW Panel) & 2 Run for

Volume-III, PRICE BID AUG. OF Bhadara RWSS

15.2 3.5 c x 50 sq.mm. AL XLPE Armoured (MVDB panel to 22 KW Panel & 18.5 KW) 50 MTR 211.00

15.3 3 c X 16 Sq.mm AL XLPE Armoured (For 22 KW /18.5 KW motors) 200 MTR 91.00

15.4 3 c X 95 Sq.mm AL XLPE Armoured (For 75 KW motors) 100 MTR 299.00

15.5 3 c X 10 Sq.mm AL XLPE Armoured (For 11 KW motors) PCC to Cubical Control Panel 20 MTR 86.00

15.6 4 C x 6 sq.mm. Cu XLPE (For LDB, PBD, EOT,etc.) 100 MTR 195.00

3 C x 2.5 Sq.mm CU XLPE Armoured (For TPN MCB at PMCC room & Pump house

maintenance floor, flow meter etc.)

PVC insulated flat / round submersible copper cables

PVC Insulated Flat Copper Submersible Cable for HMSM Pump as per detaild Technical

15.8 specification. Of R/C of GWSSB Confirming to IS 694 IEC 60227 / 60228 Size:- 1x 3 Core x 6 100 mtr 120.00

Sq.mm. comp with reqd. accessories. (Cubical Control panel To HMSM Pump- 11-15 HP

CABLE TRAY: Supply & laying GI perforated type cable trays with returned edge/

flange, fabricated from 2.0 mm thk sheet steel in the standard length of 2.5 mtrs, duly

hot dipped galvanized after fabrication as per IS 2629-1989 / IS 4759-1984 including

16.0 accessories such as coupler plates/ fish plates, bends, tees, reducers, elbows, covers 60 MTR 251.00

and electro-galvanized hardware etc, erected on existing support as per specification

and instruction of engineer in charge.

150(W) x 50(H) x 2.0 mm Thick

Supply & laying GI perforated type cable trays with returned edge / flange, fabricated

from 2.0 mm thk sheet steel in the standard length of 2.5 mtrs, duly hot dipped

galvanized after fabrication as per IS 2629-1989 / IS 4759-1984 including accessories

such as coupler plates/ fish plates, bends, tees, reducers, elbows, covers and electro-

galvanized hardware etc, erected on existing support as per specification and instruction

of Engineer-in-charge. 300(W) x 50(H) x 2.0 mm Thick

Cable Trench, Laying & Installation of Cable: Making trench in soft soil of suitable

18.0 width of 90 cms deep for laying cable or locating the fault all over the run and backfilling 100 MTR 55.00

the same and making the surface as normal ground.

Cable Covering in Trench: Covering of cable with second class bricks or cement tiles

laid cover the cable crosswise & also on both sides with covering of 7. 5 Cms. layer of

sand above & below cable (16 bricks per meter) as per IS & Specification. (For HT & LT

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Maintenance free Chemical Earthing: Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of applications with chamber

20.0 and heavy duty cover.(approved make OEM has to submit test certificate) & having back filling 7 Nos 5703.00

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 W/ meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted.For Electrical installation up to 11 KV in normal soil. Length of Pipe

: 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg..(for 2 nos. for transformer body, 2 nos. for

transformer neutarl, 1 nos. for LT panel & APFC Panel , 1 nos. for HT panel, 1 nos. for Motor )

G.I. Earth Strip: Supply, laying and erection of 50mm(w) x 6mm(T) etc. sizes as required, HOT

deep GI Strip including supply & fixing using GI spacers, saddles when laid inside the building

20.1 and inclusive of excavation & refilling of earth when laid outside the building & interconnection 448.00 KG 77.00

with earth pit & all electro-mechanical equipments.as per detail specification. (25X6 G.I Strip,

Supply, laying and erection of 50mm(w) x 6mm(T) etc. sizes Copper Strip including supply &

fixing of bolts, saddles when laid inside the building and inclusive of excavation & refilling of earth

21.0 when laid outside the building & interconnection with earth pit & Tr. neutral. as per detail 67 Kg 787.00

(50X6 Cu. Strip, 2.68 Kg/m, 2.68 x 25Mt.=67Kg.)

INTERNAL WIRING:- Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be erected concealed in

22.0 /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of 100 MTR 82.00

green colour for earth continuity of following size with medium class Rigid PVC pipe and

accessories Main wiring with 3 wire 1.5 Sq.mm

Supply,Installation,Testing and Commissioning of Main wiring with 3 wire 2.5 sq. mm as per

tender specification / IS

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete.

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden

22.3 box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected 4 NOS 471.00

with following type of accessories.

For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Point wiring for Individual Plug with earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1kV

grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed

in/ on surface of wall/ ceiling complete with Modular type switch & 5 pin Plug erected on PVC/

22.4 Metallic box covered with appropriate front plate modules erected on/ in wall/ ceiling as per pipe 4 NOS 704.00

erected with following type of accessories. For 16A Plug and 16 amp switch with 2-2.5 sq.mm

Cu. Wire from mcb db board. with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

LED LIGHT FIXTURES: Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name 120 to 300 V,Power Factor

23.0 more than 0.9, THD < 10 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED 10 NOS 751.00

efficiency-110 lumens/watt LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds /

NICHIA / SEOUL/Bridgelux make LED used for luminaire. ( fitting required LM-79 & LM-80

Certificates) Tube Light with integral/ nonintegral driver 22-24 Watts, Surge - 2KV,IP-20, 4 feet,

Providing and erecting Approved make 1200mm sweep ceiling fan, capacitor type, having double

ball bearing 450mm down rod, canopies, shackle, rubber bush, blades, electronic speed

regulator, suitable to operate on 230V,50Hz AC supply conforming to IS: 374/1979.Fan shall be

painted with white colour.

EXTERNAL LIGHTING: Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt

. LED driver efficiency > 85 %.CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/

BridgeLux (U.S.A.) make LED used for luminaire. ( fittings required LM-79 & LM-80 certificates)

Flood Light (IP-65), Surge -4KV,Light must have 440VAC line supply protection. It should

withstand 48 hours for 440VAC line supply. above 60 to 90 Watts, Cat-III

BRAKET: Supplying and erecting B class galvanised iron pipe 32 mm outside dia 45 cm long

23.3 duly welded on 20 cm x 20 cm x 3 mm thick M.S. base plate, erected on wall or corner for 6 NOS 340.00

mounting street light luminaire with necessary hardware materials duly painted.

SAFETY ACCESSORIES: Supplying & erecting ABC powder type 'Ceasefire' type Fire

24.0 extinguisher as per IS 13849 or 1 Kg capacity with necessary clamp for erection on wall. (for 6 NOS 840.00

2no. LT & HT Room)

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe

bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for

24.1 medicinal user, Scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be 2 NOS 297.00

of standard makes) (For Pump house / LT Room)

Providing and fixing printed instruction chart both in English and Gujarati and duly framed with

front glasses, for treatment of person suffering from Electric shock with minimum 50" diagonally

24.2 size.. (1no. For LT Room and 1 no. for HT Room)

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with

extra handle at bottom duly painted white inside and Red out side with FIRE mark, filled with

24.3 dry-sand and kept on existing stand provided or hung on wall hook. ( for HT Panel, Tr.1, Tr.2)

Suppying & erecting floor mounting stand for keeping 4 nos of fire buckets comprising

1500 mm in length & 900 mm height made out of 30mmX30mmX4mm angle iron with

cross supports for lags welded with 4 hooks & duly painted with one coat of red lead &

two coats of approved enammeled silver paint

Supplying 12 mm rubber matting of following thickness as per IS:15652/IEC 61111 (for HT

5 SQ.MTR 3051.00

26.1 Supplying 4 mm rubber matting of following thickness as per IS:15652/IEC 61111 (for LT Panel) 20 SQ.MTR 1017.00

Providing and erecting metallic vitrified danger notice board as per language suggested

27.0 by engineer incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551. 4.00 Each 80.00

Providing and erecting metallic vitrified danger notice board as per language suggested

27.1 by engineer incharge for HIGH VOLTAGE installation to be erected as per IS-2551. 2.00 Each 95.00

Providing & Erecting 3mm thick Polycarbonate (PC) sheet for Painting and lettering of

Name of RWSS, Name of H.W./S.H.W., Pump type, Discharge, Head, KW/HP,No. of

pump set. Year of installation etc. as per instruction of Engineer In-charge on pvc

display board of various size as per Sq. Inch. , and Fixing of the same on wall with

necessary fixture. Size- 24' x 18' / 12' x 12'

Supplying & erecting approved make Digital time switch having lithium cell 6 years

operative and operate battery backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V +5%, 16A with, floating contacts Minimum switching setup

29.0 time 1 minimum & LCD display. Also comprise dpermanent ON/OFF switching. 1 Each 3137.00

Programming switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as directed.

Supplu of Steel Cup board 3 selves - 20 Gauge . Size - 50 X 30 X 18 as per

30.0 Instruction of Engineer Incharge. 1 No 7420.00

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Supply of Steel Table 3 Door -18 Gauge. Size-48 X 24 X 30 as per Instruction of

Engineer Incharge.

Supply of Steel Perforated Chair powdercoated -16 Gauge. Standard size as per

Instruction of Engineer Incharge.

Total of Section ( A+B) Rs.

Executive Engineer Dy. Executive Engineer

P. H. Mechanical Sub Dn No.2,

P. H. Mech DIVISION , Rajkot

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Name of Work- Design, Build and Operate contract for Augumentation of Bhadara Regional Water Supply Scheme

Taluka- Jamkandorna,Jetpur Dist-Rajkot

Schedule:- B7.5 Pumping Machinery for Head Work : Ujala SHW

Duty Point : (1) Ujala SHW : Prop Sump to Ext ESR Section- 19 LPS, 39 Mtr. Head & 15 kW (2 Working + 2 Stand By) - 04 Sets

Quantity UNIT Amount

Item Description (only (upto 50 ( Upto

(upto 200 ( Upto

figures) characters) Decimals )

characters) Decimals )

MECHANICAL PART

1.0 HSCF /MULTISTAGE PUMPSET: Ujala SHW to Ujala ESR: Supply, installation, testing &

commissioning of Horizontal split casing centrifugal pump motor set of specified duty parameter and

guarnateed efficiency of following MOC with specified capacity and withhorizontal foot mounted TEFC

squirrel cage inducion motor ,working on three phase 50 Hz +/- 3%, 415 V +/- 10%, rated speed

RPM alongwith fabricated MS base frame, coupling with guard, foundation bolts etc. complete set as

per relevent IS M.O.C.: CF8M, Casing: Cast steel WCB, Shaft: SS 410, Shaft Sleeve: SS

Mechanical Seal (above 30 kW), Base Frame: MS. etc Complete. DUTY PARAMETERS: - 19 LPS x

Mtr Head, Minimum 15 kW Prime mover 1450 rpm (2W+2S) Minimum Pump Eff. - 65% Pump

KW :- 19 X 39 / 102 / 0.65 = 11.18 KW x 1.20 Margin 13.41 KW Next Manu. Range selected

Kw (Per KW=Rs.9118.00) (15 KWx9118.00) = Rs.

2.0 Drain Pump / Dewatering Pump : Supply of horizontal mono submersible pump set (Drain Pump) as

per IS:14220/ 1994 & its latest ammendments of flow rate of 10 M3/ Hr @ 10 meters head with

suitable submersible motor as per IS: 9283 / 1994 & its latest ammendments working on with minimum

with suitable submersible motor working on 3 phase, 415 + - 10%, 50 + - 3% Hz power supply ,rated

speed 2900 RPM of following duty capacity, Material of Construction : Impeller- High TEnsile Brass /

LTB II, Casing: CI FG 260 , Pump & motor Shaft: SS 304; Bearing Bush - LTB complete.

M.S. PIPE : Manufacture, Supply & Delivery of Electric Resistance Welded (Up to

400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe having beveled ends plate

or coil conforming to IS-3589-2001 or its latest revision/ ammendment for following

thickness outside diameter at GWSSB store or site anywhere in Gujarat State

including all taxes, insurance,transportation, freight charges, octroi, inspection

charges, loading, unloading conveyance to Departmental stores,stacking etc. all

Size: 150 mm NB-4.5 mm thick (Suction Side )-As per site requirement

Size: 250 mm NB-5.0 mm thick (Header Side )-As per site requirement 18 Mtr 2884.00

Size: 100 mm NB-4.0 mm thick (Delivery side )-As per site requirement 20 MTR 980.66

Volume-III, PRICE BID AUG. OF Bhadara RWSS

SITC of M.S.Specials fabricated from MS pipes/ plates of required thickness

confirming to relevent IS including all taxes, duties, insurance, transformation, freight,

octoroi, inspection, loading, unloading,convey to site, stacking, etc. Complete Up to

4.0 Supply, testing & Commissioning of flange ends Expansion Bellow as per EJMA standards of overall

length of minimum 300 mm , designed for 15 mm axial compression and 5 mm axial extension with tie

rods etc of follwoing MOC and pressure ratings.MOC: Bellows SA 240 Gr 304 ; Internal Sleeve SA 240 4.00 No. 3420.00

Gr 304 ; Weldends : IS 2062 Gr B: ( Drilling as per IS 1538 IS 6392 ) & limit Rods & nuts : CS - IS

1367. Size :-100 MM Dia., PN 1.0 (On Delivery Ujala SHW to Ujala ESR)

4.1 --- do -- 150 MM Dia., PN 1.0 (On Suction Pipe Ujala SHW to Ujala ESR Section.) 4.00 No. 4656.00

4.2 --- do -250 MM Dia., PN 1.0 (On Header Pipe & Flowmeter forUjala SHW to Ujala ESR Section)) 2.00 No. 7745.00

5.0 SITC of CI Dual Plate Check Valve as per API-594/598 with lowering, laying and jointing in position

including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing

etc. complete.on Delivery Pipe Size :- 100 MM Dia., PN 1.0 (On Delivery Pipe of Ujala SHW to

Ujala ESR Section

5.1 - do.. 250 MM Dia., PN 1.0 Rating (On Header Pipe Ujala SHW to Ujala ESR Section) 1.00 No. 25986.00

6.0 SITC of ISI mark Manually Gear Operated CI D/F Butterfly Valves as per IS 13095 (having ISI mark

embossed on the valve) with Sleeve of EPDM and disc., shaft & internal part of SS-410 including all

taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking with lowering, laying and jointing in position including cost

of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.

Size :- 100 MM Dia PN-1.0 Rating Ujala SHW to Ujala ESR Section on Delivery Pipe

6.1 --- do -- 250 MM Dia., PN 1.0 (On Header pipe Ujala SHW to Ujala ESR Section.) 1.00 No. 9509.00

7.0 SITC of ISI mark, Manually Hand Wheel Operated CI D/F Sluice Valves as per IS 14846 with Body,

Dome, Cover - CI, Seat & Face - Bronze, Spindle - SS410, Spinle Nut - Bronze, etc., including all taxes,

insurance, transportation,freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking with lowering, laying and jointing in position including cost of all labour,

jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. 50 mm Dia.,

PN 1.0 (On Bypass of Header pipeline Section)

7.1 --- do.. -150 MM Dia., PN 1.0 (On Suction of Ujala SHW to Ujala ESR Section) 4.00 No. 6433.00

8.0 Pressure Gauge with Accessories: Design , Supply, installation, testing & commissioning of Bourdon

type pressure gauge ,+-1% accuracy, Direct bottom 1/2" NPT (M) process connection ,IP

Glycerine filled ,SS304 Case with BAyonet Type Bezel,SS316 L Bourdon Tube, SS 316 Movement

material ,Aluminium Dial with black graduation on white background, Micro Zero adustable pointer

neoprene gasket ,Blow out disc ,shatter proof glass, SS tag plate etc as per IS 3624 of 150 mm dial size.

9.0 Single Girder E.O.T. Crane : Providing & erecting Single girder type fully electrically operated E.O.T.

crane with electrically operated hoist, class II duty, geared travelling trolley with seven meter lift

complete with long travel rail track (40 mm sq. bar), moving or cross girder, all three motions electrically

operated by suitable rating motor IP 54, control panel & down pendant control block, brake, safety

device, cables form motor to starter panel & other required accessories & tested as per IS Specifications

(12m long travel, 0 m -6 m span, 6 mt to 10 mt lift ) 1 Ton Capacity

Volume-III, PRICE BID AUG. OF Bhadara RWSS

10.0 SITC of C.I. Temper Proof Air Valve with SS304 float, gun metal nozzle of approved make and

quality of following class and diameter with Manually Hand Wheel Operated CI D/F Sluice Valves with

Body, Dome, Cover - CI, Seat & Face - Bronze, Spindle - SS410, Spinle Nut - Bronze, etc., including all

taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking, etc. complete.50 MM Dia PN -1.0 Rating for all Three

11.0 Full Bore Electromagnetic Flow Meter - Regular Power Operated : Design, supply, installation,

testing, commissioning of full bore electromegnatic flow meter with factory calibrated regulator power

operated, flanged connection, flow sensor, indicator, tranmittor and totaliser with all accessories viz.

surge arrestor, associated cables, hardwares, etc complete as per following conditions : Flow meter

sensor : DC pulsed type, IP 68 protection, Flanged process connection as per IS 1538 or equivalent

standard, SS304/mettallic alloy flow tube, SS316/ SS 316 L/ Hastelloy sensor, SS316/ Hastelloy

grounding ring/ inbuilt grounding electrode, neprene/ polyurethene/ hard rubber/ rilsen lining, SS304/Die

cast Aluminium/ carbon steel with Anticorrosive paint coil housing with junction box, CS flanged. Flow 1.00 No. 117201.00

transmitter / converter (Remote Field Mounted) : Microprocessor based, Modular design, 2 line LSD for

indication of actual flow rate , forward, reverse, sum totaliser disply, +0.5% accuracy at 0.3 to 4 m/sec

velocity, 4 to 20 ma with HART/ modulas output, one status output, IP 67 protection, die cast

aluminimum/polycarbonate/SS316 with anticorrosive paint/ PU finish with glass window enclosure,

inbuild EEPROM, and data logger, 20 mtrs calbe length for sensor to transmitter communication etc

alongwith wall mounted/ stand mounted cabinet. PN 1.0 For Ujala SHW to Ujala ESR Section--250

12.0 RCC Work : Providing & casting in situ reinforced cement concrete in grade M 20 (Ratio 1:2:4) using

quartzite trap metal of size 6 mm to 12 mm for RCC work, including scaffolding centering, form work,

consolidating, curing etc. inclusive providing and binding necessary size TMT steel bars of Fe 415 grade 10.00 Cum 9180.40

with water proofing compound as per directives for pipe support / thrust blocks.

13.0 Breaking cutting of RCCC brick and retaining wall, incerting the Pudder suction pipes, common header

pipes out side the pump house and refilling wall opening by the cemant concret quick setiing cemant

water proffing chemicals etc. and making the water proof joints asa per site requirement rate for material 2.00 Job 2678.00

L.S. 1000 & for labor = semi skilled 3 labour for one day rs. 487+ 72.20 = 559.20*3 = Rs.1677.60 SAY

14.0 Providing, erecting, fabricating the MS structure as per requirement on site

incorporating proper size of MS angels, flats, bars, channels, section complete with

cutting, welding, grinding and finishing duly painted with one coat of red oxide with

erection on site as per direction of engineer incharge with necessary grouting, 100.00 Kg. 109.36

cementing, plastering and finishing completed. to prevent the entry of birds and proper

vantilation in pump house for door.& Window the design and drawings of the gate shall

be approved by the engineer in charge prior to purchase and manufacturing of the gate.

Providing and erecting Portable Diesel driven self priming Horizontal mono pump

set (Dewatering Set) with four wheel trolley, GI medium duty delivery pipes, Specials,

Suction Strainer etc. Complete set 12-30 LPS ,6-12 Mtrs Head, MOC: Impeller-

Bronze, Casing- C.I, Shaft-Carbon Steel

Volume-III, PRICE BID AUG. OF Bhadara RWSS

ELECTRICAL PART

MCCB with BOXProviding and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 50 KA. at 415 V. having normal

current rating up to 200A. with variable Microprocessor release suitable to work 1.00 No. 23788.51

on A.C.supply 50 c/s. with all internal connections spreader tinned copper &

complete erected in New 16 G.M.S. housing. 200 A Cat III

2.0 Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium

Busbars Suitable For 200 A with four equal Nos. of bus having current density not

more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable socket to each

busbar,erected in existing cubical panel with necessary connections.Suitable for 200 A

3.0 SITC of Star Delta starter suitable for local & remote pump control application consisting of MPCB,

overload relay and contactors as per Type II coordination including digital voltmeter, analogue ammeter

with selector switch, run hour meter, required protective relays & control accessories. S.D. from 16 to

4.0 1.1kV Grade Cable- Aluminium Conductor:

Supply, laying, testing & commissioning1.1 kVgrade, XLPE insulated ,stranded Aluminium conductor,

galvansised steel flat strip / round wire Armoured, exruded PVC type ST2 shealthed, heavy duty cable

with Aluminium Conductor conforming to IS 7098 (Part-I) & IEC 60502 / 1988 for 1100 Volts grade of

approved make with glanding and termination with suitable size lugs / bolts & nuts with all required

materials and labour. Cable shall be laid on wall surface with necessary clamps / in existing cable

trench/ CAble trays / conduit / pipe sleeves at road crossing or floor as per site requirement. Size :-

1X3.5X 25 SQ.MM ( GEB Mtr To MCCB to Panel )

4.2 ....Do... 1X3X 10 SQ MM. XLPE Cable For 15 KW Panel To Motor ( Ujala Sump to Ujala ESR

4.3 4 c X 4 Sq.mm Cu XLPE Armoured (For EOT, LDB) 30 mtr 141.00

5.0 Lighting Distribution Board (LDB) as under: Providing and erecting Sheet Steel powder

coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for Three phase incoming and single phase horizontal type outgoing Per phase isolation 1 NOS 5775.00

type (PPI) single door 6 way Prewired Lighting Distribution Board Suitable to house :

Incoming: 25A FP, ELMCB (30mA), Cat-III

Outgoing: 20A SP MCB (6 nos.), 16A SP MCB (6 nos.)

Volume-III, PRICE BID AUG. OF Bhadara RWSS

6.0 Maintenance free Chemical Earthing: Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per

IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of applications

with chamber and heavy duty cover.(approved make OEM has to submit test certificate) & 2.0 No. 4546.00

having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 W/

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted. For Electrical installation up to

440V in normal soil. Length of Pipe : 1.00 mtrs Back filling Compound :1 no. Bag of 15 Kg..(1

Nos. for LT panel, 1 Nos. for Motor)

6.1 G.I. Earth Strip: Supply, laying and erection of 50mm(w) x 6mm(T) etc. sizes as required,

HOT deep GI Strip including supply & fixing using GI spacers, saddles when laid inside the

building and inclusive of excavation & refilling of earth when laid outside the building & 112 Kgs. 70.00

interconnection with earth pit & all electro-mechanical equipments. (for panel) (25X6 G.I Strip,

7.0 SITC of GI perforated type cable trays with returned edge/ flange, fabricated from 2.0 mm thk 30.00 mtr

sheet steel in the standard length of 2.5 mtrs, duly hot dipped galvanized after fabrication as per

IS 2629-1989 / IS 4759-1984 including accessories such as coupler plates/ fish plates, bends,

tees, reducers, elbows, covers and electro-galvanized hardware etc, erected on existing support

as per specification and instruction of engineer in charge. 150(W)x35(H)x2.0 mm Thick

8.0 Supplying and erecting 12 mm thick rubber mat as per IS 5424 for LT of required length &

breadth with good insuklation propoerty for 22KV. 6.00 Sq. m. 3051.00

Supplying of 12mm rubber matting of following thickness as per IS:15652 /IEC

9.0 Providing and erecting metallic vitrified danger notice board as per language suggested by

engineer incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551. 2.00 Each 69.00

10.0 Providing & erecting Printed instruction chart both in English & Gujarati and duly frame with

front glasses ;for treatment of persion suffering from electric shock. 2.00 Each 129.00

11.0 Supplying stand First Aid Box with antiseptic cream, medicine for use on wounds due burn,

crepe bandage ,gaufe bandage ,medicated ready to use bandage adhesuve tape for medicinal 2.00 Each 297.00

user , Scissors, anti-septic solution tec- all the standard contents.

12.0 Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with

necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. 2.00 Each 8586.00

For 6.5 KG Capacity

Volume-III, PRICE BID AUG. OF Bhadara RWSS

13.0 Mains with 1.1kV grade FRLS PVC insulated ISI marked stranded copper conductor wire in

following type of pipe to be erected in/ on wall /ceiling with 2.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth continuity of following size. With 30 mtr 111.00

medium class Rigid PVC pipe and accessories a. 2 wire 4 sq.mm (with 2.5 sq.mm earth wire)

14.0 Providing following type of Modular type accessories mounted with PVC/ metallic box, single

mounting base frame covered with textured/ metallic front plate, modules erected with

necessary connection as desired by Engineer In charge 6 Each 267.00

16A single Pole Modular MCB Switch, Cat. II (3 point of 30 Watt, 3 point of 70 Watt,)

15.0 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assemble don single MCPCB, with housing use dasa heat sink shall be made of thick sheet

Steel conforming to IS:513 / CRCA / aluminium pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser house din aluminium casted body with company

mark/name 160 V to 270 V , Power Factor more than 0.95, THD < 15 %,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %(fitting required LM 6 Each 751.00

- 79 & LM -80 Certificates ) (NOTE: Below description have shown ranges of Wattage

capacity of LED fittings. The Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Square / Circular shaped Surface / Recessed Mount Down light with

provision for spring loaded mounting clips complete.IP20 22-24 Watts, Surge - 2KV,IP-20,

16.0 Supplying and erecting LED streetlight/ Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminium housing with smooth finish powder coated and

heat sink extruded aluminium with diffuserand Polycarbonateoptics/ lenses with company mark

/name engraved or embossed160 to 270 V, Power Factor more than 0.95, THD < 10%, CCT

3000 K to 5700 K, Uniformity ratio > 0.45, Luminaire efficacy > 100 lumens/watt. LED driver 4 Each 3312.00

efficiency > 85%. (fittings required LM - 79 & LM-80 certificates) (NOTE: Below description

have shown ranges of Wattage capacity of LED fittings. The Engineer incharge may select any

wattage capacity between the ranges shown.)(A) Street Light (IP-65), Surge protection - 4 KV

integraland, Light must have 440 VAC line supply with over-voltage protection.36-48 Watts,

Surge - 2KV,IP-20, 4 feet, Cat-III

17.0 Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with

condenser A.C.23OV.50c/s.1200mm.sweep complete, can opyerected on existing hook or 2 Each 1581.00

clamp with earthing. [Make shall be approved by Engineer in charge]

18.0 Providing & erecting Switch board for Computer or electric apparatus consisting of following

items in single board erected on PVC / Metal/Wooden board concealed/open with 3 mm thick

PC (Polycarbonate) / Acrylic sheet erected as directed 1 no. 6A/16A universal plug-switch

combined. 3 nos. 6A Switch 3 nos. 6A 5 pin Plug

Volume-III, PRICE BID AUG. OF Bhadara RWSS

19.0 Supplu of Steel Cup board 3 selves - 20 Gauge . Size - 50 X 30 X 18 as per

Instruction of Engineer Incharge

58.0 Supply of Steel Table 3 Door -18 Gauge. Size-48 X 24 X 30 as per Instruction of

Engineer Incharge.

20.0 Supply of Steel Perforated Chair powdercoated -16 Gauge. Standard size as per

Instruction of Engineer Incharge 1 No 2160.00

Providing & Erecting 3mm thick Polycarbonate (PC) sheet for Painting and lettering of Name

of RWSS, Name of H.W./S.H.W., Pump type, Discharge, Head, KW/HP,No. of pump set. Year

of installation etc. as per instruction of Engineer In-charge on pvc display board of various size 2000.00 Sq. Inch 3.00

as per Sq. Inch. , and Fixing of the same on wall with necessary fixture. Size- 24' x 18' / 12' x

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative

and operate battery backup 1 channel day clock with 14 memory programme, suitable to

operate on 240V +5%, 16A with, floating contacts Minimum switching setup time 1 minimum

& LCD display. Also comprise dpermanent ON/OFF switching. Programming switches & 1 Each 3137.00

housed in fire proof thermoplastic enclosure & transparent cover erected as required with

necessary connection erected as directed.

Total (A)+(B) - (Rs.)

Executive Engineer Dy. Executive Engineer

P. H. Mechanical Sub Dn No.2,

P. H. Mech DIVISION , Rajkot

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Name of Work- Design, Build and Operate contract for Augumentation of Bhadara Regional Water Supply Scheme

SCHEDULE C1- COMPREHENSIVE O & M WORK :: PART A

Quantity UNIT Rate Amount

Item Description (only (upto 50 ( Upto 2 ( Upto

figures) characters) Decimals Decimals )

Comprehensive Operation and Maintenance of the project mainly Water Treatment Plant,

different class, type and diameter pipes, pump houses, Sumps, RCC ESR, H.G.L.R, Sluice

valves, Flow meters, Non-return valve, Pump, motor, capacitor, L.T. Panels, L.T. cables and

transformer installed at Headwork and Sub headwork. Work includes replacement of spares for

all equipment and maintenance of all civil structures and all electro-mechanical installation etc.

complete. Including submission of periodic MIS reports on software. Supply of potable water in

accordance, maintaining residual chlorine, and all consumables. All type operations, preventive

maintenance, overhauls and repair/ break down maintenance for civil / mechanical & electrical

works. Providing prescribed nos. of qualified and experienced staff for overall management of

O&M work as per detailed specification & obligatory requirement for 120 months. Excluding

electric power, raw water cost, chlorine, PAC and bleaching powder under Augmentation of

Bhadara Regional water supply schemes & Fofal 1-2 RWSS of Tal.- Jamkandorana,Jetpur,

Dist.- Rajkot as per tender.

Part A: Operation & Maintenance of Civil & Electromechanical assets as per this contract for the

Augmentation of Bhadara Regional water supply scheme + Fofal 1-2 RWSS, including

supply of <Required> MLD potable water to all the hamlets i.e. 12V+(38V+3P) villages for

months period. Taluka: Jamkandorana,Jetpur, Dist.- Rajkot based on Fofal Dam HW

Excluding supply of PAC, bleaching powder and chlorine gas.

1.1 First Year :with effect of 1st year DLP for new All components 12 Month 1254713

1.2 Second Year : with effect of 2nd year DLP for new All components 12 Month 1329996

1.3 Third Year : with effect of 3rd year DLP for new All components 12 Month 1409796

1.4 Forth Year : with effect of 4th year DLP for new Building components 12 Month 1591472

1.5 Fifth Year : 12 Month 1719939

1.6 Sixth Year : 12 Month 1823135

1.7 Seventh Year : 12 Month 1932523

1.8 Eighth Year : 12 Month 2048475

1.9 Ninth year : 12 Month 2171383

1.10 Tenth Year : 12 Month 2301666

Dy. Executive Engineer Executive Engineer

P.H.S.Sub Division P.H.Works Division

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Name of Work- Design, Build and Operate contract for Ribda Group Augumentation Water Supply Scheme

SCHEDULE C2- COMPREHENSIVE O & M WORK :: PART B

Item Description Qty (upto 50 ( Upto

(upto 200 ( Upto

characters) Decimals )

characters) Decimals )

Comprehensive Operation and Maintenance of the project mainly Water Treatment Plant,

different class, type and diameter pipes, pump houses, Sumps, RCC ESR, H.G.L.R,

Sluice valves, Flow meters, Non-return valve, Pump, motor, capacitor, L.T. Panels, L.T.

cables and transformer installed at Headwork and Sub headwork. Work includes

replacement of spares for all equipment and maintenance of all civil structures and all

electro-mechanical installation etc. complete. Including submission of periodic MIS reports

on software. Supply of potable water in accordance, maintaining residual chlorine, and all

consumables. All type operations, preventive maintenance, overhauls and repair/ break

down maintenance for civil / mechanical & electrical works. Providing prescribed nos. of

qualified and experienced staff for overall management of O&M work as per detailed

1.2.0.0 specification & obligatory requirement for 120 months. Excluding electric power, raw water

cost, chlorine, PAC and bleaching powder under Augmentation of Bhadara Regional

water supply schemes & Fofal 1-2 RWSS of Tal.- Jamkandorana,Jetpur, Dist.- Rajkot

Part B : Maintenance activities, measured and paid separately, such as painting, cleaning

of reservoirs/ tanks, procurement and replacement of filter media etc complete as per this

tender document

Payment will be made in proportion to the change in actual quantity measured

against the fixed quantity indicated in the respective items.

1.2.3.1 Forth,Seventh & Tenth Year:PART B1(i):Painting Maintanance: at Mid of 4th year,

End of 7th Year, End of 10th Year of O&M Period

(i) Distempeing-2 Coat :Inside Painting to all Functional civil structures, as per schedule (3

time in the 10 Year period) for WTP-1N+PH-6N in a Lot

1.2.5.1 Forth,Seventh & Tenth Year:PART B1(ii):Painting Maintanance: at Mid of 4th year,

End of 7th Year, End of 10th Year of O&M Period

(ii) Weather proof exterior emulsion paint-2 Coat:Out side Painting to all Functional civil

structures, as per schedule (3 time in the 10 Year period) for WTP-1N+Sumps/HGLR-

13N+ESR-5N+PH-6N+C Wall-7Location in a Lot (3 time in the 10 Year period)

Volume-III, PRICE BID AUG. OF Bhadara RWSS

1.2.3.2 Forth,Seventh & Tenth Year:PART B1(iii):Painting Maintanance: at Mid of 4th year,

End of 7th Year, End of 10th Year of O&M Period

(iii) Enamel paint-3 Coat: Oil paint colour: All type of doors, windows, ventilation, shutter,

pump, motor, all valves & equipment inside pump house, transformer yard, D.P. structure,

transformer etc in a Lot (3 time in the 10 Year period)

1.2.3.3 Forth,Seventh & Tenth Year:PART B1(iii):Painting Maintanance: at Mid of 4th year,

End of 7th Year, End of 10th Year of O&M Period(iv) Epoxy 2 Coats:Food Grade epoxy

coat: Inside of storage reservoir/ tanks for 13 Sump/HGLR +5 ESR ) (3 time in the

1.2.1.1 First Year to Tenth Year : PART B2: Cleaning of Storage (At the ending of 6th &

th Month of each year of O&M Period) every six months (20 times in the 10 Year

period) :Sump/HGLR Capacity=0.20ML(3 NoX20 Cycles) 60 2618.00 No

1.2.1.2 First Year to Tenth Year : PART B2: Cleaning of Storage (At the ending of 6th &

th Month of each year of O&M Period) every six months (20 times in the 10 Year

period) :Sump/HGLR Capacity=0.30ML (2NoX20 Cycles) 40 3414.00 No

1.2.1.3 First Year to Tenth Year : PART B2: Cleaning of Storage (At the ending of 6th &

th Month of each year of O&M Period) every six months (20 times in the 10 Year

period) :Sump/HGLR Capacity=0.50ML(2NoX20 Cycles) 40 5463.00 No

1.2.1.4 First Year to Tenth Year : PART B2: Cleaning of Storage (At the ending of 6th &

th Month of each year of O&M Period) every six months (20 times in the 10 Year

period) :Sump/HGLR Capacity=1.0ML(1NoX20Cycles) 20 9105.00 No

1.2.1.5 First Year to Tenth Year : PART B2: Cleaning of Storage (At the ending of 6th &

th Month of each year of O&M Period) every six months (20 times in the 10 Year

period) :Sump/HGLR Capacity=1.20ML(1NoX20Cycles) 20 10925.00 No

1.2.1.6 First Year to Tenth Year : PART B2: Cleaning of Storage (At the ending of 6th &

th Month of each year of O&M Period) every six months (20 times in the 10 Year

period) :Sump/HGLR Capacity=1.50ML(1NoX20Cycles) 40 13429.00 No

1.2.1.7 First Year to Tenth Year : PART B2: Cleaning of Storage (At the ending of 6th &

th Month of each year of O&M Period) every six months (20 times in the 10 Year

period) :Sump/HGLR Capacity=4.0ML(1NoX20Cycles) 20 34483.00 No

1.2.1.8 First Year to Tenth Year : PART B2: Cleaning of Storage (At the ending of 6th &

th Month of each year of O&M Period) every six months (20 times in the 10 Year

period) :Sump/HGLR Capacity=6.0ML(1NoX20Cycles) 20 50757.00 No

First Year to Tenth Year : PART B2: Cleaning of Storage (At the ending of 6th &

th Month of each year of O&M Period) every six months (20 times in the 10 Year

period) :ESR Capacity=0.07ML(1NoX20Cycles) 20 2503.00 No

First Year to Tenth Year : PART B2: Cleaning of Storage (At the ending of 6th &

th Month of each year of O&M Period) every six months (20 times in the 10 Year

period) :ESR Capacity=0.40ML(1NoX20Cycles) 20 3984.00 No

Volume-III, PRICE BID AUG. OF Bhadara RWSS

First Year to Tenth Year : PART B2: Cleaning of Storage (At the ending of 6th &

th Month of each year of O&M Period) every six months (20 times in the 10 Year

period) :ESR Capacity=0.50ML(1NoX20Cycles) 20 4466.00 No

First Year to Tenth Year : PART B2: Cleaning of Storage (At the ending of 6th &

th Month of each year of O&M Period) every six months (20 times in the 10 Year

period) :ESR Capacity=0.80ML(1NoX20Cycles) 20 6600.00 No

First Year to Tenth Year : PART B2: Cleaning of Storage (At the ending of 6th &

th Month of each year of O&M Period) every six months (20 times in the 10 Year

period) :ESR Capacity=0.90ML(1NoX20Cycles) 20 7056.00 No

1.2.1.2 First to Tenth Year : PART B3: Filling of filter media (At the ending of 6th & 12 th

Month of Each year of O&M Period) Lost media restoration for WTP (For 13 MLD

WTP:Approx 12M3/Cycle every six months (20 times in the 10 Year period) 240 1277.00 Cum

Executive Engineer

P.H.Works Division

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Name of Work- Design, Build and Operate contract for Augumentation of Bhadara Regional Water Supply Scheme

Taluka- Jamkandorna,Jetpur Dist-Rajkot

SCHEDULE C : COMPREHENSIVE O & M WORK (Civil & Electro Mechanical)

Comprehensive Operation and Maintenance of the project mainly Water Treatment Plant, different class, type and diameter pipes, pump houses, Sumps, RCC ESR,

H.G.L.R, Sluice valves, Flow meters, Non-return valve, Pump, motor, capacitor, L.T. Panels, L.T. cables and transformer installed at Headwork and Sub headwork.

Work includes replacement of spares for all equipment and maintenance of all civil structures and all electro-mechanical installation etc. complete. Including

submission of periodic MIS reports on software. Supply of potable water in accordance, maintaining residual chlorine, and all consumables. All type operations,

preventive maintenance, overhauls and repair/ break down maintenance for civil / mechanical & electrical works. Providing prescribed nos. of qualified and

experienced staff for overall management of O&M work as per detailed specification & obligatory requirement for 120 months. Excluding electric power, raw water

cost, chlorine, PAC and bleaching powder under Augmentation of Bhadara Regional water supply schemes & Fofal 1-2 RWSS of Tal.- Jamkandorana,Jetpur,

Dist.- Rajkot as per tender.

Part A: Operation & Maintenance of Civil & Electromechanical Part B : Maintenance activities, measured and paid

assets as per this contract for the Augmentation of Bhadara separately, such as painting, cleaning of reservoirs/ tanks,

Regional water supply scheme + Fofal 1-2 RWSS, including procurement and replacement of filter media etc complete

supply of <Required> MLD potable water to all the hamlets & as per this tender document

12V+(38V+3P) villages for 120 months period. Taluka:

Jamkandorana,Jetpur, Dist.- Rajkot based on Fofal Dam HW Grand Total

Jamkandorana,Jetpur, Dist.- Rajkot based on Fofal Dam HW Grand Total

Sr. Sequence of Excluding supply of PAC, bleaching powder and chlorine gas.

Rate per Month Amount per Year PartA+PartB

Total Amount For Proposed & Existing Civil-Mech

Total Amount For Proposed & Existing Civil-Mech

UNIT For Proposed & per Year for Amount of Amount of

Month Amount of Amount per

Existing Civil- Part A B2: B3: WTP

B1: Painting year for Part

Mech Cleaning of Sand

Total Cost for 10 Year Total Cost for 10 Year

Dy. Executive Engineer Executive Engineer

P.H.S.Sub Division No-2 P.H.Works Division

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Breakup of Part:A

COST CALCULATION for SCHEDULE C- Part-A : O & M WORK

O&M Cost Allocation/year for proposed & Existing components

O&M Year Inflation Cost of staff Cost for Cost for Cost for O&M of Total Annual Monthly

applied Esttablishment O&M of O&M of Proposed O&M Cost O&M

& Vehicle Existing Proposed Component Cost

Component Component (Building)

1 st Year 12,530,832 DLP DLP

2 Year 13,282,682 DLP DLP

3 rd Year 14,079,643 DLP DLP

4 Year 14,924,421 DLP

Total O&M for 10 years

Dy. Executive Engineer EXECUTIVE ENGINEER

P.H.S.Sub Division P. H. WORKS DIVISION

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Establishments Requirement of Man Power during O&M Period

(For One year) For All components(Proposed & Existing)

Location Wise Nos. of Person requirement

ard Fofal Fofal Bhadra Dudhi Kap Pipar Ujala Cha Cha Gund D- Total

Sr. Asset Canal dam HGLR vadar eldh di SHW rel vand asari Netw

Designation Guidelines Requi

No. data Intak site ESR ar SHW ESR i HGL ork

t (nos) e HW SHW HW SH R Vega

Engineer (5 YoE)

Asst. Maintenance

3 subdivisio subdivis 1 1

Engineer (1 YoE)

4 Operators (1 YoE)

for filter plant and

a 2 per plant Plants: 2 2

for pumping 1 per

station PS/Shift

5 control centre: 0

station + 1 Total

6 Electrician (3 YoE) per PS: 6 + 1 1

category A 1 Cat A

7 1 per lab ory: 1 1 1

Chemist (1 YoE)

Volume-III, PRICE BID AUG. OF Bhadara RWSS

8 inspection, repair

and distribution

Pipe Fitter (0.5 1 per

Valve man (0.5 1 per 10

YoE) villages Village

for filter plant

b 2 per plant Plants: 2 2

d 1 per lab ory: 1 1 1

(sampling testing)

11 Sweeper 20,000 ns of < 2 1 1

sqft area 20000s

Outdoor campus premise

Total manpower 62 5 16 3 2 8 7 6 2 3 1 6

Volume-III, PRICE BID AUG. OF Bhadara RWSS

Break up of Part: B

Name of Work- Design, Build and Operate contract for Augumentation of Bhadara Regional Water Supply Scheme

Calculation of Cost of Part B: for Specific Scheduled Maintanace required for O&M activity (Baseline year-2026)

Part B : For Proposed & Existing Work : Maintenance activities, measured and paid separately, such as painting, cleaning of reservoirs/ tanks, procurement and replacement

of filter media etc complete as per this tender document

Amoun Amoun Amoun Amoun Amoun Amoun Amoun

Amount Amount Amount

t for t for t for t for t for t for t for Total Amount

t for t for t for t for t for t for t for Total Amount

Base for 4th for 7th for 10th

Rate Year Year Year

Sr. Stat Year Year Year Year Year Year Year

Item Qty Unit (in Rs.)

Basic At Rate including 0% yearly inflation

Distempeing-2 Coat:Inside Painting to all Functional civil structures, as per schedule (3 time in the 10 Year period)

WTP- 10-15 MLD Sqm Per

Bha capacity (Inside all Pro No.X1

dra: Surface with pos 1 Time@ 63024 63024 63024 63024

HW Plastic Emulsion ed Rate

paint-3 Coat) Rs.62.4Per

+Ve Pump House- ~750 Sqm

415-435 Sqm Per No.X1

(Inside all Surface Time@

with Plastic Rate

Emulsion paint-3 Rs.62.4Per

VT Pump House- ~370 Sqm

90-110 Sqm Per No.X1

(Inside all Surface Time@

with Plastic Rate

Emulsion paint-3 Rs.62.4Per

+Ve Pump House- ~450 Sqm

140-160 Sqm Per No.X1

(Inside all Surface Exis Time@

with Plastic ting Rate

Emulsion paint-3 Rs.62.4Per

Volume-III, PRICE BID AUG. OF Bhadara RWSS

+Ve Pump House- ~410 Sqm

115-135 Sqm Per No.X1

(Inside all Surface Time@

with Plastic Rate

Emulsion paint-3 Rs.62.4Per

Weather proof exterior emulsion paint-2 Coat:Out side Painting to all Functional civil structures, as per schedule (3 time in the 10 Year period)

capacity (Outside

all Surface with

exterior emulsion

ESR 0.1-0.5ML ~420 Sqm

Capacity (Outside Per No.X1

all surface Exis Time@

Weather proof ting Rate

exterior emulsion Rs.120.93P

paint-2 Coat) er Sqm

ESR 0.5-1.0ML ~710 Sqm

Capacity (Outside Per No.X1

all surface Exis Time@

Weather proof ting Rate

exterior emulsion Rs.120.93P

paint-2 Coat) er Sqm

ESR 0.1-0.5ML ~420 Sqm

Fofa Capacity (Outside Per No.X1

l: all surface Exis Time@

Ujal Weather proof ting Rate

a exterior emulsion Rs.120.93P

paint-2 Coat) er Sqm

Sump 1-2ML ~510 Sqm

Capacity (Outside Per No.X1

all surface Time@

Weather proof Rate

exterior emulsion Rs.120.93P

paint-2 Coat) er Sqm

Sump 4-5ML ~1370

Capacity (Outside Sqm Per

all surface No.X1 .1

Weather proof Time@

Volume-III, PRICE BID AUG. OF Bhadara RWSS

exterior emulsion Rate

paint-2 Coat) Rs.120.93P

(Outside all Pro

surface Weather pos 1 29023.2 29023.2 29023.2

proof exterior ed

emulsion paint-2

dra: Exis Time@

surface Weather 2 58046.4 58046.4 58046.4

emulsion paint-2

nal+ 1MLCapacity

Kap (Outside all

el+ surface Weather 4 116092.8 116092.8 116092.8

Ch.. proof exterior

di+ emulsion paint-2

Fofa 1MLCapacity

l:Ca (Outside all Pro

nal+ surface Weather pos 1 29023.2 29023.2 29023.2

Ujal proof exterior ed

a emulsion paint-2

Sump 1-2ML ~240 Sqm

Capacity (Outside Per No.X1

all surface Exis Time@

Weather proof ting Rate

exterior emulsion Rs.120.93P

paint-2 Coat) er Sqm

Sump 5-6ML ~1610

Capacity (Outside Sqm Per

all surface Exis No.X1

Weather proof ting Time@ .3

exterior emulsion Rate

paint-2 Coat) Rs.120.93P

Volume-III, PRICE BID AUG. OF Bhadara RWSS

+Ve Pump House-

Bha (Outside all Pro

dra: Surface Weather pos 1 84651 84651 84651 84651

HW proof exterior ed

emulsion paint-2

Fofa (Outside all Pro

l:Ca Surface Weather pos 1 41116.2 41116.2 41116.2

nal proof exterior ed

emulsion paint-2

Fofa +Ve Pump House-

l:Ka 140-160 Sqm

pel+ (Outside all

Pipa Surface Weather 3 152371.8 152371.8 152371.8

rdi+ proof exterior

Dne emulsion paint-2

+Ve Pump House-

Fofa (Outside all Pro

l:Uja Surface Weather pos 1 47162.7 47162.7 47162.7

la proof exterior ed

emulsion paint-2

(Inside-Outside all ~4 Sqm

Surface with Per RmtX1

Outside all Time@

Surface Weather Rate

proof exterior Rs.120.93P

emulsion paint-2 er Sqm

Coat)):1 Locations

Volume-III, PRICE BID AUG. OF Bhadara RWSS

l:Ca Compound Wall

nal+ (Inside-Outside all ~4 Sqm

Kap Surface with Per RmtX1

el+ Outside all Exis 107 Time@

Pi.di Surface Weather ting 2 Rate

+Ch proof exterior Rs.120.93P

.di+ emulsion paint-2 er Sqm

Dne Coat)):5 Locations

(Inside-Outside all ~4 Sqm

Surface with Per RmtX1

Outside all Time@

Surface Weather Rate

proof exterior Rs.120.93P

emulsion paint-2 er Sqm

Coat)):1 Locations

B1 Enamel paint-3 Coat: Oil paint colour: All type of doors, windows, ventilation, shutter, pump, motor, all valves & equipment inside pump house, transformer yard, D.P.

(iii) structure, transformer etc (Three time in the 10 Year period)

All installation of

capacity having

Iron/steel like

Bha CLR Bridge Pro

dra: Assembly/All pos 1 17555 17555 17555 17555

HW Machinery/All ed

Arrangement/Door

Letters etc all

All installation of

dra: Iron/steel i.e All

Dud Piping/Railling/Do 1 3511 3511 3511 3511

hiva or/Window/Ventila

indicator/Ladders/

Capacity Letters

Volume-III, PRICE BID AUG. OF Bhadara RWSS

All installation of

1MLwith structural ~30 Sqm

Iron/steel i.e All Per No.X1

Piping/Railling/Do Exis Time@

or/Window/Ventila ting Rate

tor/WL Rs.175.55P

indicator/Ladders/ er Sqm

Capacity Letters

All installation of

Iron/steel i.e All

Piping/Railling/Do 1 3511 3511 3511 3511

or/Window/Ventila

indicator/Ladders/

Capacity Letters

All installation of

having structural ~20 Sqm

Iron/steel i.e All Per No.X1

Piping/Railling/Do Time@

or/Window/Ventila Rate

tor/WL Rs.175.55P

indicator/Ladders/ er Sqm

Capacity Letters

All installation of

having structural ~30 Sqm

Iron/steel i.e All Per No.X1

Piping/Railling/Do Time@

or/Window/Ventila Rate

tor/WL Rs.175.55P

indicator/Ladders/ er Sqm

Capacity Letters

All installation of ~10 Sqm

Sump upto-1ML Pro Per No.X1

having structural pos 1 Time@ 1755.5 1755.5 1755.5 1755.5

Iron/steel i.e All ed Rate

Piping/Railling/Do Rs.175.55P

Volume-III, PRICE BID AUG. OF Bhadara RWSS

or/Window/Ventila er Sqm

indicator/Ladders/

Capacity Letters

All installation of

having structural ~10 Sqm

Bha Iron/steel i.e All Per No.X1

dra: Piping/Railling/Do Exis Time@

HG or/Window/Ventila ting Rate

LR tor/WL Rs.175.55P

indicator/Ladders/ er Sqm

Capacity Letters

All installation of

having structural ~10 Sqm

Iron/steel i.e All Per No.X1

Piping/Railling/Do Exis Time@

or/Window/Ventila ting Rate

tor/WL Rs.175.55P

indicator/Ladders/ er Sqm

Capacity Letters

All installation of

having structural ~10 Sqm

Iron/steel i.e All Per No.X1

Piping/Railling/Do Time@

or/Window/Ventila Rate

tor/WL Rs.175.55P

indicator/Ladders/ er Sqm

Capacity Letters

All installation of

having structural ~20 Sqm

Iron/steel i.e All Per No.X1

Piping/Railling/Do Exis Time@

or/Window/Ventila ting Rate

tor/WL Rs.175.55P

indicator/Ladders/ er Sqm

Capacity Letters

Volume-III, PRICE BID AUG. OF Bhadara RWSS

All installation of

having structural ~40 Sqm

Iron/steel i.e All Per No.X1

Piping/Railling/Do Exis Time@

or/Window/Ventila ting Rate

tor/WL Rs.175.55P

indicator/Ladders/ er Sqm

Capacity Letters

+Ve Pump House-

having structural

Bha Iron/steel i.e All Pro

dra: Machinery/Piping/ pos 1 8777.5 8777.5 8777.5 8777.5

HW Railling/Door/Win ed

dow/Ventilator/La

Letters etc all

having structural

Fofa Iron/steel i.e All Pro

l:Ca Machinery/Piping/ pos 1 5266.5 5266.5 5266.5 5266.5

nal Railling/Door/Win ed

dow/Ventilator/La

Letters etc all

+Ve Pump House-

Fofa 140-160 Sqm

l:Ka having structural

pel+ Iron/steel i.e All

Pipa Machinery/Piping/ 3 5266.5 15799.5 15799.5 15799.5

rdi+ Railling/Door/Win

Dne dow/Ventilator/La

Letters etc all

+Ve Pump House-

having structural

Fofa Iron/steel i.e All Pro

l:Uja Machinery/Piping/ pos 1 5266.5 5266.5 5266.5 5266.5

la Railling/Door/Win ed

dow/Ventilator/La

Letters etc all

Volume-III, PRICE BID AUG. OF Bhadara RWSS

having structural

Iron/steel i.e All

Bha Machinery/Piping/ Pro

dra: Railling/Door/ pos 1 3511 3511 3511 3511

Letters etc all

having structural

Iron/steel i.e All

Machinery/Piping/

Railling/Door/ 5 3511 17555 17555 17555

Pi.di ting Rate

Letters etc all

having structural

Iron/steel i.e All

Fofa Machinery/Piping/ Pro

l:Uja Railling/Door/ pos 1 3511 3511 3511 3511

Letters etc all

Epoxy 2 Coats:Food Grade epoxy coat: Inside of storage reservoir/ tanks as per schedule. (Three time in the 10 Year period)

Bha ESR 0.1-0.5 ML

dra: Capacity (Inside

Dud container wall 1 21340 21340 21340 21340

hiva surface with

dar epoxy -2 coat